linux/drivers/platform/x86/compal-laptop.c
<<
>>
Prefs
   1/*-*-linux-c-*-*/
   2
   3/*
   4  Copyright (C) 2008 Cezary Jackiewicz <cezary.jackiewicz (at) gmail.com>
   5
   6  based on MSI driver
   7
   8  Copyright (C) 2006 Lennart Poettering <mzxreary (at) 0pointer (dot) de>
   9
  10  This program is free software; you can redistribute it and/or modify
  11  it under the terms of the GNU General Public License as published by
  12  the Free Software Foundation; either version 2 of the License, or
  13  (at your option) any later version.
  14
  15  This program is distributed in the hope that it will be useful, but
  16  WITHOUT ANY WARRANTY; without even the implied warranty of
  17  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
  18  General Public License for more details.
  19
  20  You should have received a copy of the GNU General Public License
  21  along with this program; if not, write to the Free Software
  22  Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
  23  02110-1301, USA.
  24 */
  25
  26/*
  27 * compal-laptop.c - Compal laptop support.
  28 *
  29 * This driver exports a few files in /sys/devices/platform/compal-laptop/:
  30 *   wake_up_XXX   Whether or not we listen to such wake up events (rw)
  31 *
  32 * In addition to these platform device attributes the driver
  33 * registers itself in the Linux backlight control, power_supply, rfkill
  34 * and hwmon subsystem and is available to userspace under:
  35 *
  36 *   /sys/class/backlight/compal-laptop/
  37 *   /sys/class/power_supply/compal-laptop/
  38 *   /sys/class/rfkill/rfkillX/
  39 *   /sys/class/hwmon/hwmonX/
  40 *
  41 * Notes on the power_supply battery interface:
  42 *   - the "minimum" design voltage is *the* design voltage
  43 *   - the ambient temperature is the average battery temperature
  44 *     and the value is an educated guess (see commented code below)
  45 *
  46 *
  47 * This driver might work on other laptops produced by Compal. If you
  48 * want to try it you can pass force=1 as argument to the module which
  49 * will force it to load even when the DMI data doesn't identify the
  50 * laptop as compatible.
  51 *
  52 * Lots of data available at:
  53 * http://service1.marasst.com/Compal/JHL90_91/Service%20Manual/
  54 * JHL90%20service%20manual-Final-0725.pdf
  55 *
  56 *
  57 *
  58 * Support for the Compal JHL90 added by Roald Frederickx
  59 * (roald.frederickx@gmail.com):
  60 * Driver got large revision. Added functionalities: backlight
  61 * power, wake_on_XXX, a hwmon and power_supply interface.
  62 *
  63 * In case this gets merged into the kernel source: I want to dedicate this
  64 * to Kasper Meerts, the awesome guy who showed me Linux and C!
  65 */
  66
  67/* NOTE: currently the wake_on_XXX, hwmon and power_supply interfaces are
  68 * only enabled on a JHL90 board until it is verified that they work on the
  69 * other boards too.  See the extra_features variable. */
  70
  71#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
  72
  73#include <linux/module.h>
  74#include <linux/kernel.h>
  75#include <linux/init.h>
  76#include <linux/acpi.h>
  77#include <linux/dmi.h>
  78#include <linux/backlight.h>
  79#include <linux/platform_device.h>
  80#include <linux/rfkill.h>
  81#include <linux/hwmon.h>
  82#include <linux/hwmon-sysfs.h>
  83#include <linux/power_supply.h>
  84#include <linux/fb.h>
  85#include <acpi/video.h>
  86
  87/* ======= */
  88/* Defines */
  89/* ======= */
  90#define DRIVER_NAME "compal-laptop"
  91#define DRIVER_VERSION  "0.2.7"
  92
  93#define BACKLIGHT_LEVEL_ADDR            0xB9
  94#define BACKLIGHT_LEVEL_MAX             7
  95#define BACKLIGHT_STATE_ADDR            0x59
  96#define BACKLIGHT_STATE_ON_DATA         0xE1
  97#define BACKLIGHT_STATE_OFF_DATA        0xE2
  98
  99#define WAKE_UP_ADDR                    0xA4
 100#define WAKE_UP_PME                     (1 << 0)
 101#define WAKE_UP_MODEM                   (1 << 1)
 102#define WAKE_UP_LAN                     (1 << 2)
 103#define WAKE_UP_WLAN                    (1 << 4)
 104#define WAKE_UP_KEY                     (1 << 6)
 105#define WAKE_UP_MOUSE                   (1 << 7)
 106
 107#define WIRELESS_ADDR                   0xBB
 108#define WIRELESS_WLAN                   (1 << 0)
 109#define WIRELESS_BT                     (1 << 1)
 110#define WIRELESS_WLAN_EXISTS            (1 << 2)
 111#define WIRELESS_BT_EXISTS              (1 << 3)
 112#define WIRELESS_KILLSWITCH             (1 << 4)
 113
 114#define PWM_ADDRESS                     0x46
 115#define PWM_DISABLE_ADDR                0x59
 116#define PWM_DISABLE_DATA                0xA5
 117#define PWM_ENABLE_ADDR                 0x59
 118#define PWM_ENABLE_DATA                 0xA8
 119
 120#define FAN_ADDRESS                     0x46
 121#define FAN_DATA                        0x81
 122#define FAN_FULL_ON_CMD                 0x59 /* Doesn't seem to work. Just */
 123#define FAN_FULL_ON_ENABLE              0x76 /* force the pwm signal to its */
 124#define FAN_FULL_ON_DISABLE             0x77 /* maximum value instead */
 125
 126#define TEMP_CPU                        0xB0
 127#define TEMP_CPU_LOCAL                  0xB1
 128#define TEMP_CPU_DTS                    0xB5
 129#define TEMP_NORTHBRIDGE                0xB6
 130#define TEMP_VGA                        0xB4
 131#define TEMP_SKIN                       0xB2
 132
 133#define BAT_MANUFACTURER_NAME_ADDR      0x10
 134#define BAT_MANUFACTURER_NAME_LEN       9
 135#define BAT_MODEL_NAME_ADDR             0x19
 136#define BAT_MODEL_NAME_LEN              6
 137#define BAT_SERIAL_NUMBER_ADDR          0xC4
 138#define BAT_SERIAL_NUMBER_LEN           5
 139#define BAT_CHARGE_NOW                  0xC2
 140#define BAT_CHARGE_DESIGN               0xCA
 141#define BAT_VOLTAGE_NOW                 0xC6
 142#define BAT_VOLTAGE_DESIGN              0xC8
 143#define BAT_CURRENT_NOW                 0xD0
 144#define BAT_CURRENT_AVG                 0xD2
 145#define BAT_POWER                       0xD4
 146#define BAT_CAPACITY                    0xCE
 147#define BAT_TEMP                        0xD6
 148#define BAT_TEMP_AVG                    0xD7
 149#define BAT_STATUS0                     0xC1
 150#define BAT_STATUS1                     0xF0
 151#define BAT_STATUS2                     0xF1
 152#define BAT_STOP_CHARGE1                0xF2
 153#define BAT_STOP_CHARGE2                0xF3
 154#define BAT_CHARGE_LIMIT                0x03
 155#define BAT_CHARGE_LIMIT_MAX            100
 156
 157#define BAT_S0_DISCHARGE                (1 << 0)
 158#define BAT_S0_DISCHRG_CRITICAL         (1 << 2)
 159#define BAT_S0_LOW                      (1 << 3)
 160#define BAT_S0_CHARGING                 (1 << 1)
 161#define BAT_S0_AC                       (1 << 7)
 162#define BAT_S1_EXISTS                   (1 << 0)
 163#define BAT_S1_FULL                     (1 << 1)
 164#define BAT_S1_EMPTY                    (1 << 2)
 165#define BAT_S1_LiION_OR_NiMH            (1 << 7)
 166#define BAT_S2_LOW_LOW                  (1 << 0)
 167#define BAT_STOP_CHRG1_BAD_CELL         (1 << 1)
 168#define BAT_STOP_CHRG1_COMM_FAIL        (1 << 2)
 169#define BAT_STOP_CHRG1_OVERVOLTAGE      (1 << 6)
 170#define BAT_STOP_CHRG1_OVERTEMPERATURE  (1 << 7)
 171
 172
 173/* ======= */
 174/* Structs */
 175/* ======= */
 176struct compal_data{
 177        /* Fan control */
 178        int pwm_enable; /* 0:full on, 1:set by pwm1, 2:control by motherboard */
 179        unsigned char curr_pwm;
 180
 181        /* Power supply */
 182        struct power_supply *psy;
 183        struct power_supply_info psy_info;
 184        char bat_model_name[BAT_MODEL_NAME_LEN + 1];
 185        char bat_manufacturer_name[BAT_MANUFACTURER_NAME_LEN + 1];
 186        char bat_serial_number[BAT_SERIAL_NUMBER_LEN + 1];
 187};
 188
 189
 190/* =============== */
 191/* General globals */
 192/* =============== */
 193static bool force;
 194module_param(force, bool, 0);
 195MODULE_PARM_DESC(force, "Force driver load, ignore DMI data");
 196
 197/* Support for the wake_on_XXX, hwmon and power_supply interface. Currently
 198 * only gets enabled on a JHL90 board. Might work with the others too */
 199static bool extra_features;
 200
 201/* Nasty stuff. For some reason the fan control is very un-linear.  I've
 202 * come up with these values by looping through the possible inputs and
 203 * watching the output of address 0x4F (do an ec_transaction writing 0x33
 204 * into 0x4F and read a few bytes from the output, like so:
 205 *      u8 writeData = 0x33;
 206 *      ec_transaction(0x4F, &writeData, 1, buffer, 32);
 207 * That address is labeled "fan1 table information" in the service manual.
 208 * It should be clear which value in 'buffer' changes). This seems to be
 209 * related to fan speed. It isn't a proper 'realtime' fan speed value
 210 * though, because physically stopping or speeding up the fan doesn't
 211 * change it. It might be the average voltage or current of the pwm output.
 212 * Nevertheless, it is more fine-grained than the actual RPM reading */
 213static const unsigned char pwm_lookup_table[256] = {
 214        0, 0, 0, 1, 1, 1, 2, 253, 254, 3, 3, 3, 4, 4, 4, 5, 5, 5, 6, 6, 6,
 215        7, 7, 7, 8, 86, 86, 9, 9, 9, 10, 10, 10, 11, 92, 92, 12, 12, 95,
 216        13, 66, 66, 14, 14, 98, 15, 15, 15, 16, 16, 67, 17, 17, 72, 18, 70,
 217        75, 19, 90, 90, 73, 73, 73, 21, 21, 91, 91, 91, 96, 23, 94, 94, 94,
 218        94, 94, 94, 94, 94, 94, 94, 141, 141, 238, 223, 192, 139, 139, 139,
 219        139, 139, 142, 142, 142, 142, 142, 78, 78, 78, 78, 78, 76, 76, 76,
 220        76, 76, 79, 79, 79, 79, 79, 79, 79, 20, 20, 20, 20, 20, 22, 22, 22,
 221        22, 22, 24, 24, 24, 24, 24, 24, 219, 219, 219, 219, 219, 219, 219,
 222        219, 27, 27, 188, 188, 28, 28, 28, 29, 186, 186, 186, 186, 186,
 223        186, 186, 186, 186, 186, 31, 31, 31, 31, 31, 32, 32, 32, 41, 33,
 224        33, 33, 33, 33, 252, 252, 34, 34, 34, 43, 35, 35, 35, 36, 36, 38,
 225        206, 206, 206, 206, 206, 206, 206, 206, 206, 37, 37, 37, 46, 46,
 226        47, 47, 232, 232, 232, 232, 232, 232, 232, 232, 232, 232, 48, 48,
 227        48, 48, 48, 40, 40, 40, 49, 42, 42, 42, 42, 42, 42, 42, 42, 44,
 228        189, 189, 189, 189, 54, 54, 45, 45, 45, 45, 45, 45, 45, 45, 251,
 229        191, 199, 199, 199, 199, 199, 215, 215, 215, 215, 187, 187, 187,
 230        187, 187, 193, 50
 231};
 232
 233
 234
 235
 236/* ========================= */
 237/* Hardware access functions */
 238/* ========================= */
 239/* General access */
 240static u8 ec_read_u8(u8 addr)
 241{
 242        u8 value;
 243        ec_read(addr, &value);
 244        return value;
 245}
 246
 247static s8 ec_read_s8(u8 addr)
 248{
 249        return (s8)ec_read_u8(addr);
 250}
 251
 252static u16 ec_read_u16(u8 addr)
 253{
 254        int hi, lo;
 255        lo = ec_read_u8(addr);
 256        hi = ec_read_u8(addr + 1);
 257        return (hi << 8) + lo;
 258}
 259
 260static s16 ec_read_s16(u8 addr)
 261{
 262        return (s16) ec_read_u16(addr);
 263}
 264
 265static void ec_read_sequence(u8 addr, u8 *buf, int len)
 266{
 267        int i;
 268        for (i = 0; i < len; i++)
 269                ec_read(addr + i, buf + i);
 270}
 271
 272
 273/* Backlight access */
 274static int set_backlight_level(int level)
 275{
 276        if (level < 0 || level > BACKLIGHT_LEVEL_MAX)
 277                return -EINVAL;
 278
 279        ec_write(BACKLIGHT_LEVEL_ADDR, level);
 280
 281        return 0;
 282}
 283
 284static int get_backlight_level(void)
 285{
 286        return (int) ec_read_u8(BACKLIGHT_LEVEL_ADDR);
 287}
 288
 289static void set_backlight_state(bool on)
 290{
 291        u8 data = on ? BACKLIGHT_STATE_ON_DATA : BACKLIGHT_STATE_OFF_DATA;
 292        ec_transaction(BACKLIGHT_STATE_ADDR, &data, 1, NULL, 0);
 293}
 294
 295
 296/* Fan control access */
 297static void pwm_enable_control(void)
 298{
 299        unsigned char writeData = PWM_ENABLE_DATA;
 300        ec_transaction(PWM_ENABLE_ADDR, &writeData, 1, NULL, 0);
 301}
 302
 303static void pwm_disable_control(void)
 304{
 305        unsigned char writeData = PWM_DISABLE_DATA;
 306        ec_transaction(PWM_DISABLE_ADDR, &writeData, 1, NULL, 0);
 307}
 308
 309static void set_pwm(int pwm)
 310{
 311        ec_transaction(PWM_ADDRESS, &pwm_lookup_table[pwm], 1, NULL, 0);
 312}
 313
 314static int get_fan_rpm(void)
 315{
 316        u8 value, data = FAN_DATA;
 317        ec_transaction(FAN_ADDRESS, &data, 1, &value, 1);
 318        return 100 * (int)value;
 319}
 320
 321
 322
 323
 324/* =================== */
 325/* Interface functions */
 326/* =================== */
 327
 328/* Backlight interface */
 329static int bl_get_brightness(struct backlight_device *b)
 330{
 331        return get_backlight_level();
 332}
 333
 334static int bl_update_status(struct backlight_device *b)
 335{
 336        int ret = set_backlight_level(b->props.brightness);
 337        if (ret)
 338                return ret;
 339
 340        set_backlight_state((b->props.power == FB_BLANK_UNBLANK)
 341                &&    !(b->props.state & BL_CORE_SUSPENDED)
 342                &&    !(b->props.state & BL_CORE_FBBLANK));
 343        return 0;
 344}
 345
 346static const struct backlight_ops compalbl_ops = {
 347        .get_brightness = bl_get_brightness,
 348        .update_status  = bl_update_status,
 349};
 350
 351
 352/* Wireless interface */
 353static int compal_rfkill_set(void *data, bool blocked)
 354{
 355        unsigned long radio = (unsigned long) data;
 356        u8 result = ec_read_u8(WIRELESS_ADDR);
 357        u8 value;
 358
 359        if (!blocked)
 360                value = (u8) (result | radio);
 361        else
 362                value = (u8) (result & ~radio);
 363        ec_write(WIRELESS_ADDR, value);
 364
 365        return 0;
 366}
 367
 368static void compal_rfkill_poll(struct rfkill *rfkill, void *data)
 369{
 370        u8 result = ec_read_u8(WIRELESS_ADDR);
 371        bool hw_blocked = !(result & WIRELESS_KILLSWITCH);
 372        rfkill_set_hw_state(rfkill, hw_blocked);
 373}
 374
 375static const struct rfkill_ops compal_rfkill_ops = {
 376        .poll = compal_rfkill_poll,
 377        .set_block = compal_rfkill_set,
 378};
 379
 380
 381/* Wake_up interface */
 382#define SIMPLE_MASKED_STORE_SHOW(NAME, ADDR, MASK)                      \
 383static ssize_t NAME##_show(struct device *dev,                          \
 384        struct device_attribute *attr, char *buf)                       \
 385{                                                                       \
 386        return sprintf(buf, "%d\n", ((ec_read_u8(ADDR) & MASK) != 0));  \
 387}                                                                       \
 388static ssize_t NAME##_store(struct device *dev,                         \
 389        struct device_attribute *attr, const char *buf, size_t count)   \
 390{                                                                       \
 391        int state;                                                      \
 392        u8 old_val = ec_read_u8(ADDR);                                  \
 393        if (sscanf(buf, "%d", &state) != 1 || (state < 0 || state > 1)) \
 394                return -EINVAL;                                         \
 395        ec_write(ADDR, state ? (old_val | MASK) : (old_val & ~MASK));   \
 396        return count;                                                   \
 397}
 398
 399SIMPLE_MASKED_STORE_SHOW(wake_up_pme,   WAKE_UP_ADDR, WAKE_UP_PME)
 400SIMPLE_MASKED_STORE_SHOW(wake_up_modem, WAKE_UP_ADDR, WAKE_UP_MODEM)
 401SIMPLE_MASKED_STORE_SHOW(wake_up_lan,   WAKE_UP_ADDR, WAKE_UP_LAN)
 402SIMPLE_MASKED_STORE_SHOW(wake_up_wlan,  WAKE_UP_ADDR, WAKE_UP_WLAN)
 403SIMPLE_MASKED_STORE_SHOW(wake_up_key,   WAKE_UP_ADDR, WAKE_UP_KEY)
 404SIMPLE_MASKED_STORE_SHOW(wake_up_mouse, WAKE_UP_ADDR, WAKE_UP_MOUSE)
 405
 406/* Fan control interface */
 407static ssize_t pwm_enable_show(struct device *dev,
 408                struct device_attribute *attr, char *buf)
 409{
 410        struct compal_data *data = dev_get_drvdata(dev);
 411        return sprintf(buf, "%d\n", data->pwm_enable);
 412}
 413
 414static ssize_t pwm_enable_store(struct device *dev,
 415                struct device_attribute *attr, const char *buf, size_t count)
 416{
 417        struct compal_data *data = dev_get_drvdata(dev);
 418        long val;
 419        int err;
 420
 421        err = kstrtol(buf, 10, &val);
 422        if (err)
 423                return err;
 424        if (val < 0)
 425                return -EINVAL;
 426
 427        data->pwm_enable = val;
 428
 429        switch (val) {
 430        case 0:  /* Full speed */
 431                pwm_enable_control();
 432                set_pwm(255);
 433                break;
 434        case 1:  /* As set by pwm1 */
 435                pwm_enable_control();
 436                set_pwm(data->curr_pwm);
 437                break;
 438        default: /* Control by motherboard */
 439                pwm_disable_control();
 440                break;
 441        }
 442
 443        return count;
 444}
 445
 446static ssize_t pwm_show(struct device *dev, struct device_attribute *attr,
 447                char *buf)
 448{
 449        struct compal_data *data = dev_get_drvdata(dev);
 450        return sprintf(buf, "%hhu\n", data->curr_pwm);
 451}
 452
 453static ssize_t pwm_store(struct device *dev, struct device_attribute *attr,
 454                const char *buf, size_t count)
 455{
 456        struct compal_data *data = dev_get_drvdata(dev);
 457        long val;
 458        int err;
 459
 460        err = kstrtol(buf, 10, &val);
 461        if (err)
 462                return err;
 463        if (val < 0 || val > 255)
 464                return -EINVAL;
 465
 466        data->curr_pwm = val;
 467
 468        if (data->pwm_enable != 1)
 469                return count;
 470        set_pwm(val);
 471
 472        return count;
 473}
 474
 475static ssize_t fan_show(struct device *dev, struct device_attribute *attr,
 476                char *buf)
 477{
 478        return sprintf(buf, "%d\n", get_fan_rpm());
 479}
 480
 481
 482/* Temperature interface */
 483#define TEMPERATURE_SHOW_TEMP_AND_LABEL(POSTFIX, ADDRESS, LABEL)        \
 484static ssize_t temp_##POSTFIX(struct device *dev,                       \
 485                struct device_attribute *attr, char *buf)               \
 486{                                                                       \
 487        return sprintf(buf, "%d\n", 1000 * (int)ec_read_s8(ADDRESS));   \
 488}                                                                       \
 489static ssize_t label_##POSTFIX(struct device *dev,                      \
 490                struct device_attribute *attr, char *buf)               \
 491{                                                                       \
 492        return sprintf(buf, "%s\n", LABEL);                             \
 493}
 494
 495/* Labels as in service guide */
 496TEMPERATURE_SHOW_TEMP_AND_LABEL(cpu,        TEMP_CPU,        "CPU_TEMP");
 497TEMPERATURE_SHOW_TEMP_AND_LABEL(cpu_local,  TEMP_CPU_LOCAL,  "CPU_TEMP_LOCAL");
 498TEMPERATURE_SHOW_TEMP_AND_LABEL(cpu_DTS,    TEMP_CPU_DTS,    "CPU_DTS");
 499TEMPERATURE_SHOW_TEMP_AND_LABEL(northbridge,TEMP_NORTHBRIDGE,"NorthBridge");
 500TEMPERATURE_SHOW_TEMP_AND_LABEL(vga,        TEMP_VGA,        "VGA_TEMP");
 501TEMPERATURE_SHOW_TEMP_AND_LABEL(SKIN,       TEMP_SKIN,       "SKIN_TEMP90");
 502
 503
 504/* Power supply interface */
 505static int bat_status(void)
 506{
 507        u8 status0 = ec_read_u8(BAT_STATUS0);
 508        u8 status1 = ec_read_u8(BAT_STATUS1);
 509
 510        if (status0 & BAT_S0_CHARGING)
 511                return POWER_SUPPLY_STATUS_CHARGING;
 512        if (status0 & BAT_S0_DISCHARGE)
 513                return POWER_SUPPLY_STATUS_DISCHARGING;
 514        if (status1 & BAT_S1_FULL)
 515                return POWER_SUPPLY_STATUS_FULL;
 516        return POWER_SUPPLY_STATUS_NOT_CHARGING;
 517}
 518
 519static int bat_health(void)
 520{
 521        u8 status = ec_read_u8(BAT_STOP_CHARGE1);
 522
 523        if (status & BAT_STOP_CHRG1_OVERTEMPERATURE)
 524                return POWER_SUPPLY_HEALTH_OVERHEAT;
 525        if (status & BAT_STOP_CHRG1_OVERVOLTAGE)
 526                return POWER_SUPPLY_HEALTH_OVERVOLTAGE;
 527        if (status & BAT_STOP_CHRG1_BAD_CELL)
 528                return POWER_SUPPLY_HEALTH_DEAD;
 529        if (status & BAT_STOP_CHRG1_COMM_FAIL)
 530                return POWER_SUPPLY_HEALTH_UNKNOWN;
 531        return POWER_SUPPLY_HEALTH_GOOD;
 532}
 533
 534static int bat_is_present(void)
 535{
 536        u8 status = ec_read_u8(BAT_STATUS2);
 537        return ((status & BAT_S1_EXISTS) != 0);
 538}
 539
 540static int bat_technology(void)
 541{
 542        u8 status = ec_read_u8(BAT_STATUS1);
 543
 544        if (status & BAT_S1_LiION_OR_NiMH)
 545                return POWER_SUPPLY_TECHNOLOGY_LION;
 546        return POWER_SUPPLY_TECHNOLOGY_NiMH;
 547}
 548
 549static int bat_capacity_level(void)
 550{
 551        u8 status0 = ec_read_u8(BAT_STATUS0);
 552        u8 status1 = ec_read_u8(BAT_STATUS1);
 553        u8 status2 = ec_read_u8(BAT_STATUS2);
 554
 555        if (status0 & BAT_S0_DISCHRG_CRITICAL
 556                        || status1 & BAT_S1_EMPTY
 557                        || status2 & BAT_S2_LOW_LOW)
 558                return POWER_SUPPLY_CAPACITY_LEVEL_CRITICAL;
 559        if (status0 & BAT_S0_LOW)
 560                return POWER_SUPPLY_CAPACITY_LEVEL_LOW;
 561        if (status1 & BAT_S1_FULL)
 562                return POWER_SUPPLY_CAPACITY_LEVEL_FULL;
 563        return POWER_SUPPLY_CAPACITY_LEVEL_NORMAL;
 564}
 565
 566static int bat_get_property(struct power_supply *psy,
 567                                enum power_supply_property psp,
 568                                union power_supply_propval *val)
 569{
 570        struct compal_data *data = power_supply_get_drvdata(psy);
 571
 572        switch (psp) {
 573        case POWER_SUPPLY_PROP_STATUS:
 574                val->intval = bat_status();
 575                break;
 576        case POWER_SUPPLY_PROP_HEALTH:
 577                val->intval = bat_health();
 578                break;
 579        case POWER_SUPPLY_PROP_PRESENT:
 580                val->intval = bat_is_present();
 581                break;
 582        case POWER_SUPPLY_PROP_TECHNOLOGY:
 583                val->intval = bat_technology();
 584                break;
 585        case POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN: /* THE design voltage... */
 586                val->intval = ec_read_u16(BAT_VOLTAGE_DESIGN) * 1000;
 587                break;
 588        case POWER_SUPPLY_PROP_VOLTAGE_NOW:
 589                val->intval = ec_read_u16(BAT_VOLTAGE_NOW) * 1000;
 590                break;
 591        case POWER_SUPPLY_PROP_CURRENT_NOW:
 592                val->intval = ec_read_s16(BAT_CURRENT_NOW) * 1000;
 593                break;
 594        case POWER_SUPPLY_PROP_CURRENT_AVG:
 595                val->intval = ec_read_s16(BAT_CURRENT_AVG) * 1000;
 596                break;
 597        case POWER_SUPPLY_PROP_POWER_NOW:
 598                val->intval = ec_read_u8(BAT_POWER) * 1000000;
 599                break;
 600        case POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN:
 601                val->intval = ec_read_u16(BAT_CHARGE_DESIGN) * 1000;
 602                break;
 603        case POWER_SUPPLY_PROP_CHARGE_NOW:
 604                val->intval = ec_read_u16(BAT_CHARGE_NOW) * 1000;
 605                break;
 606        case POWER_SUPPLY_PROP_CHARGE_CONTROL_LIMIT:
 607                val->intval = ec_read_u8(BAT_CHARGE_LIMIT);
 608                break;
 609        case POWER_SUPPLY_PROP_CHARGE_CONTROL_LIMIT_MAX:
 610                val->intval = BAT_CHARGE_LIMIT_MAX;
 611                break;
 612        case POWER_SUPPLY_PROP_CAPACITY:
 613                val->intval = ec_read_u8(BAT_CAPACITY);
 614                break;
 615        case POWER_SUPPLY_PROP_CAPACITY_LEVEL:
 616                val->intval = bat_capacity_level();
 617                break;
 618        /* It smees that BAT_TEMP_AVG is a (2's complement?) value showing
 619         * the number of degrees, whereas BAT_TEMP is somewhat more
 620         * complicated. It looks like this is a negative nember with a
 621         * 100/256 divider and an offset of 222. Both were determined
 622         * experimentally by comparing BAT_TEMP and BAT_TEMP_AVG. */
 623        case POWER_SUPPLY_PROP_TEMP:
 624                val->intval = ((222 - (int)ec_read_u8(BAT_TEMP)) * 1000) >> 8;
 625                break;
 626        case POWER_SUPPLY_PROP_TEMP_AMBIENT: /* Ambient, Avg, ... same thing */
 627                val->intval = ec_read_s8(BAT_TEMP_AVG) * 10;
 628                break;
 629        /* Neither the model name nor manufacturer name work for me. */
 630        case POWER_SUPPLY_PROP_MODEL_NAME:
 631                val->strval = data->bat_model_name;
 632                break;
 633        case POWER_SUPPLY_PROP_MANUFACTURER:
 634                val->strval = data->bat_manufacturer_name;
 635                break;
 636        case POWER_SUPPLY_PROP_SERIAL_NUMBER:
 637                val->strval = data->bat_serial_number;
 638                break;
 639        default:
 640                break;
 641        }
 642        return 0;
 643}
 644
 645static int bat_set_property(struct power_supply *psy,
 646                                enum power_supply_property psp,
 647                                const union power_supply_propval *val)
 648{
 649        int level;
 650
 651        switch (psp) {
 652        case POWER_SUPPLY_PROP_CHARGE_CONTROL_LIMIT:
 653                level = val->intval;
 654                if (level < 0 || level > BAT_CHARGE_LIMIT_MAX)
 655                        return -EINVAL;
 656                if (ec_write(BAT_CHARGE_LIMIT, level) < 0)
 657                        return -EIO;
 658                break;
 659        default:
 660                break;
 661        }
 662        return 0;
 663}
 664
 665static int bat_writeable_property(struct power_supply *psy,
 666                                enum power_supply_property psp)
 667{
 668        switch (psp) {
 669        case POWER_SUPPLY_PROP_CHARGE_CONTROL_LIMIT:
 670                return 1;
 671        default:
 672                return 0;
 673        }
 674}
 675
 676
 677
 678
 679/* ============== */
 680/* Driver Globals */
 681/* ============== */
 682static DEVICE_ATTR(wake_up_pme,
 683                0644, wake_up_pme_show,         wake_up_pme_store);
 684static DEVICE_ATTR(wake_up_modem,
 685                0644, wake_up_modem_show,       wake_up_modem_store);
 686static DEVICE_ATTR(wake_up_lan,
 687                0644, wake_up_lan_show, wake_up_lan_store);
 688static DEVICE_ATTR(wake_up_wlan,
 689                0644, wake_up_wlan_show,        wake_up_wlan_store);
 690static DEVICE_ATTR(wake_up_key,
 691                0644, wake_up_key_show, wake_up_key_store);
 692static DEVICE_ATTR(wake_up_mouse,
 693                0644, wake_up_mouse_show,       wake_up_mouse_store);
 694
 695static DEVICE_ATTR(fan1_input,  S_IRUGO, fan_show,          NULL);
 696static DEVICE_ATTR(temp1_input, S_IRUGO, temp_cpu,          NULL);
 697static DEVICE_ATTR(temp2_input, S_IRUGO, temp_cpu_local,    NULL);
 698static DEVICE_ATTR(temp3_input, S_IRUGO, temp_cpu_DTS,      NULL);
 699static DEVICE_ATTR(temp4_input, S_IRUGO, temp_northbridge,  NULL);
 700static DEVICE_ATTR(temp5_input, S_IRUGO, temp_vga,          NULL);
 701static DEVICE_ATTR(temp6_input, S_IRUGO, temp_SKIN,         NULL);
 702static DEVICE_ATTR(temp1_label, S_IRUGO, label_cpu,         NULL);
 703static DEVICE_ATTR(temp2_label, S_IRUGO, label_cpu_local,   NULL);
 704static DEVICE_ATTR(temp3_label, S_IRUGO, label_cpu_DTS,     NULL);
 705static DEVICE_ATTR(temp4_label, S_IRUGO, label_northbridge, NULL);
 706static DEVICE_ATTR(temp5_label, S_IRUGO, label_vga,         NULL);
 707static DEVICE_ATTR(temp6_label, S_IRUGO, label_SKIN,        NULL);
 708static DEVICE_ATTR(pwm1, S_IRUGO | S_IWUSR, pwm_show, pwm_store);
 709static DEVICE_ATTR(pwm1_enable,
 710                   S_IRUGO | S_IWUSR, pwm_enable_show, pwm_enable_store);
 711
 712static struct attribute *compal_platform_attrs[] = {
 713        &dev_attr_wake_up_pme.attr,
 714        &dev_attr_wake_up_modem.attr,
 715        &dev_attr_wake_up_lan.attr,
 716        &dev_attr_wake_up_wlan.attr,
 717        &dev_attr_wake_up_key.attr,
 718        &dev_attr_wake_up_mouse.attr,
 719        NULL
 720};
 721static struct attribute_group compal_platform_attr_group = {
 722        .attrs = compal_platform_attrs
 723};
 724
 725static struct attribute *compal_hwmon_attrs[] = {
 726        &dev_attr_pwm1_enable.attr,
 727        &dev_attr_pwm1.attr,
 728        &dev_attr_fan1_input.attr,
 729        &dev_attr_temp1_input.attr,
 730        &dev_attr_temp2_input.attr,
 731        &dev_attr_temp3_input.attr,
 732        &dev_attr_temp4_input.attr,
 733        &dev_attr_temp5_input.attr,
 734        &dev_attr_temp6_input.attr,
 735        &dev_attr_temp1_label.attr,
 736        &dev_attr_temp2_label.attr,
 737        &dev_attr_temp3_label.attr,
 738        &dev_attr_temp4_label.attr,
 739        &dev_attr_temp5_label.attr,
 740        &dev_attr_temp6_label.attr,
 741        NULL
 742};
 743ATTRIBUTE_GROUPS(compal_hwmon);
 744
 745static int compal_probe(struct platform_device *);
 746static int compal_remove(struct platform_device *);
 747static struct platform_driver compal_driver = {
 748        .driver = {
 749                .name = DRIVER_NAME,
 750        },
 751        .probe  = compal_probe,
 752        .remove = compal_remove,
 753};
 754
 755static enum power_supply_property compal_bat_properties[] = {
 756        POWER_SUPPLY_PROP_STATUS,
 757        POWER_SUPPLY_PROP_HEALTH,
 758        POWER_SUPPLY_PROP_PRESENT,
 759        POWER_SUPPLY_PROP_TECHNOLOGY,
 760        POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN,
 761        POWER_SUPPLY_PROP_VOLTAGE_NOW,
 762        POWER_SUPPLY_PROP_CURRENT_NOW,
 763        POWER_SUPPLY_PROP_CURRENT_AVG,
 764        POWER_SUPPLY_PROP_POWER_NOW,
 765        POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN,
 766        POWER_SUPPLY_PROP_CHARGE_NOW,
 767        POWER_SUPPLY_PROP_CHARGE_CONTROL_LIMIT,
 768        POWER_SUPPLY_PROP_CHARGE_CONTROL_LIMIT_MAX,
 769        POWER_SUPPLY_PROP_CAPACITY,
 770        POWER_SUPPLY_PROP_CAPACITY_LEVEL,
 771        POWER_SUPPLY_PROP_TEMP,
 772        POWER_SUPPLY_PROP_TEMP_AMBIENT,
 773        POWER_SUPPLY_PROP_MODEL_NAME,
 774        POWER_SUPPLY_PROP_MANUFACTURER,
 775        POWER_SUPPLY_PROP_SERIAL_NUMBER,
 776};
 777
 778static struct backlight_device *compalbl_device;
 779
 780static struct platform_device *compal_device;
 781
 782static struct rfkill *wifi_rfkill;
 783static struct rfkill *bt_rfkill;
 784
 785
 786
 787
 788
 789/* =================================== */
 790/* Initialization & clean-up functions */
 791/* =================================== */
 792
 793static int dmi_check_cb(const struct dmi_system_id *id)
 794{
 795        pr_info("Identified laptop model '%s'\n", id->ident);
 796        extra_features = false;
 797        return 1;
 798}
 799
 800static int dmi_check_cb_extra(const struct dmi_system_id *id)
 801{
 802        pr_info("Identified laptop model '%s', enabling extra features\n",
 803                id->ident);
 804        extra_features = true;
 805        return 1;
 806}
 807
 808static struct dmi_system_id __initdata compal_dmi_table[] = {
 809        {
 810                .ident = "FL90/IFL90",
 811                .matches = {
 812                        DMI_MATCH(DMI_BOARD_NAME, "IFL90"),
 813                        DMI_MATCH(DMI_BOARD_VERSION, "IFT00"),
 814                },
 815                .callback = dmi_check_cb
 816        },
 817        {
 818                .ident = "FL90/IFL90",
 819                .matches = {
 820                        DMI_MATCH(DMI_BOARD_NAME, "IFL90"),
 821                        DMI_MATCH(DMI_BOARD_VERSION, "REFERENCE"),
 822                },
 823                .callback = dmi_check_cb
 824        },
 825        {
 826                .ident = "FL91/IFL91",
 827                .matches = {
 828                        DMI_MATCH(DMI_BOARD_NAME, "IFL91"),
 829                        DMI_MATCH(DMI_BOARD_VERSION, "IFT00"),
 830                },
 831                .callback = dmi_check_cb
 832        },
 833        {
 834                .ident = "FL92/JFL92",
 835                .matches = {
 836                        DMI_MATCH(DMI_BOARD_NAME, "JFL92"),
 837                        DMI_MATCH(DMI_BOARD_VERSION, "IFT00"),
 838                },
 839                .callback = dmi_check_cb
 840        },
 841        {
 842                .ident = "FT00/IFT00",
 843                .matches = {
 844                        DMI_MATCH(DMI_BOARD_NAME, "IFT00"),
 845                        DMI_MATCH(DMI_BOARD_VERSION, "IFT00"),
 846                },
 847                .callback = dmi_check_cb
 848        },
 849        {
 850                .ident = "Dell Mini 9",
 851                .matches = {
 852                        DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
 853                        DMI_MATCH(DMI_PRODUCT_NAME, "Inspiron 910"),
 854                },
 855                .callback = dmi_check_cb
 856        },
 857        {
 858                .ident = "Dell Mini 10",
 859                .matches = {
 860                        DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
 861                        DMI_MATCH(DMI_PRODUCT_NAME, "Inspiron 1010"),
 862                },
 863                .callback = dmi_check_cb
 864        },
 865        {
 866                .ident = "Dell Mini 10v",
 867                .matches = {
 868                        DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
 869                        DMI_MATCH(DMI_PRODUCT_NAME, "Inspiron 1011"),
 870                },
 871                .callback = dmi_check_cb
 872        },
 873        {
 874                .ident = "Dell Mini 1012",
 875                .matches = {
 876                        DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
 877                        DMI_MATCH(DMI_PRODUCT_NAME, "Inspiron 1012"),
 878                },
 879                .callback = dmi_check_cb
 880        },
 881        {
 882                .ident = "Dell Inspiron 11z",
 883                .matches = {
 884                        DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
 885                        DMI_MATCH(DMI_PRODUCT_NAME, "Inspiron 1110"),
 886                },
 887                .callback = dmi_check_cb
 888        },
 889        {
 890                .ident = "Dell Mini 12",
 891                .matches = {
 892                        DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
 893                        DMI_MATCH(DMI_PRODUCT_NAME, "Inspiron 1210"),
 894                },
 895                .callback = dmi_check_cb
 896        },
 897        {
 898                .ident = "JHL90",
 899                .matches = {
 900                        DMI_MATCH(DMI_BOARD_NAME, "JHL90"),
 901                        DMI_MATCH(DMI_BOARD_VERSION, "REFERENCE"),
 902                },
 903                .callback = dmi_check_cb_extra
 904        },
 905        {
 906                .ident = "KHLB2",
 907                .matches = {
 908                        DMI_MATCH(DMI_BOARD_NAME, "KHLB2"),
 909                        DMI_MATCH(DMI_BOARD_VERSION, "REFERENCE"),
 910                },
 911                .callback = dmi_check_cb_extra
 912        },
 913        { }
 914};
 915MODULE_DEVICE_TABLE(dmi, compal_dmi_table);
 916
 917static const struct power_supply_desc psy_bat_desc = {
 918        .name           = DRIVER_NAME,
 919        .type           = POWER_SUPPLY_TYPE_BATTERY,
 920        .properties     = compal_bat_properties,
 921        .num_properties = ARRAY_SIZE(compal_bat_properties),
 922        .get_property   = bat_get_property,
 923        .set_property   = bat_set_property,
 924        .property_is_writeable = bat_writeable_property,
 925};
 926
 927static void initialize_power_supply_data(struct compal_data *data)
 928{
 929        ec_read_sequence(BAT_MANUFACTURER_NAME_ADDR,
 930                                        data->bat_manufacturer_name,
 931                                        BAT_MANUFACTURER_NAME_LEN);
 932        data->bat_manufacturer_name[BAT_MANUFACTURER_NAME_LEN] = 0;
 933
 934        ec_read_sequence(BAT_MODEL_NAME_ADDR,
 935                                        data->bat_model_name,
 936                                        BAT_MODEL_NAME_LEN);
 937        data->bat_model_name[BAT_MODEL_NAME_LEN] = 0;
 938
 939        scnprintf(data->bat_serial_number, BAT_SERIAL_NUMBER_LEN + 1, "%d",
 940                                ec_read_u16(BAT_SERIAL_NUMBER_ADDR));
 941}
 942
 943static void initialize_fan_control_data(struct compal_data *data)
 944{
 945        data->pwm_enable = 2; /* Keep motherboard in control for now */
 946        data->curr_pwm = 255; /* Try not to cause a CPU_on_fire exception
 947                                 if we take over... */
 948}
 949
 950static int setup_rfkill(void)
 951{
 952        int ret;
 953
 954        wifi_rfkill = rfkill_alloc("compal-wifi", &compal_device->dev,
 955                                RFKILL_TYPE_WLAN, &compal_rfkill_ops,
 956                                (void *) WIRELESS_WLAN);
 957        if (!wifi_rfkill)
 958                return -ENOMEM;
 959
 960        ret = rfkill_register(wifi_rfkill);
 961        if (ret)
 962                goto err_wifi;
 963
 964        bt_rfkill = rfkill_alloc("compal-bluetooth", &compal_device->dev,
 965                                RFKILL_TYPE_BLUETOOTH, &compal_rfkill_ops,
 966                                (void *) WIRELESS_BT);
 967        if (!bt_rfkill) {
 968                ret = -ENOMEM;
 969                goto err_allocate_bt;
 970        }
 971        ret = rfkill_register(bt_rfkill);
 972        if (ret)
 973                goto err_register_bt;
 974
 975        return 0;
 976
 977err_register_bt:
 978        rfkill_destroy(bt_rfkill);
 979
 980err_allocate_bt:
 981        rfkill_unregister(wifi_rfkill);
 982
 983err_wifi:
 984        rfkill_destroy(wifi_rfkill);
 985
 986        return ret;
 987}
 988
 989static int __init compal_init(void)
 990{
 991        int ret;
 992
 993        if (acpi_disabled) {
 994                pr_err("ACPI needs to be enabled for this driver to work!\n");
 995                return -ENODEV;
 996        }
 997
 998        if (!force && !dmi_check_system(compal_dmi_table)) {
 999                pr_err("Motherboard not recognized (You could try the module's force-parameter)\n");
1000                return -ENODEV;
1001        }
1002
1003        if (acpi_video_get_backlight_type() == acpi_backlight_vendor) {
1004                struct backlight_properties props;
1005                memset(&props, 0, sizeof(struct backlight_properties));
1006                props.type = BACKLIGHT_PLATFORM;
1007                props.max_brightness = BACKLIGHT_LEVEL_MAX;
1008                compalbl_device = backlight_device_register(DRIVER_NAME,
1009                                                            NULL, NULL,
1010                                                            &compalbl_ops,
1011                                                            &props);
1012                if (IS_ERR(compalbl_device))
1013                        return PTR_ERR(compalbl_device);
1014        }
1015
1016        ret = platform_driver_register(&compal_driver);
1017        if (ret)
1018                goto err_backlight;
1019
1020        compal_device = platform_device_alloc(DRIVER_NAME, -1);
1021        if (!compal_device) {
1022                ret = -ENOMEM;
1023                goto err_platform_driver;
1024        }
1025
1026        ret = platform_device_add(compal_device); /* This calls compal_probe */
1027        if (ret)
1028                goto err_platform_device;
1029
1030        ret = setup_rfkill();
1031        if (ret)
1032                goto err_rfkill;
1033
1034        pr_info("Driver " DRIVER_VERSION " successfully loaded\n");
1035        return 0;
1036
1037err_rfkill:
1038        platform_device_del(compal_device);
1039
1040err_platform_device:
1041        platform_device_put(compal_device);
1042
1043err_platform_driver:
1044        platform_driver_unregister(&compal_driver);
1045
1046err_backlight:
1047        backlight_device_unregister(compalbl_device);
1048
1049        return ret;
1050}
1051
1052static int compal_probe(struct platform_device *pdev)
1053{
1054        int err;
1055        struct compal_data *data;
1056        struct device *hwmon_dev;
1057        struct power_supply_config psy_cfg = {};
1058
1059        if (!extra_features)
1060                return 0;
1061
1062        /* Fan control */
1063        data = devm_kzalloc(&pdev->dev, sizeof(struct compal_data), GFP_KERNEL);
1064        if (!data)
1065                return -ENOMEM;
1066
1067        initialize_fan_control_data(data);
1068
1069        err = sysfs_create_group(&pdev->dev.kobj, &compal_platform_attr_group);
1070        if (err)
1071                return err;
1072
1073        hwmon_dev = devm_hwmon_device_register_with_groups(&pdev->dev,
1074                                                           "compal", data,
1075                                                           compal_hwmon_groups);
1076        if (IS_ERR(hwmon_dev)) {
1077                err = PTR_ERR(hwmon_dev);
1078                goto remove;
1079        }
1080
1081        /* Power supply */
1082        initialize_power_supply_data(data);
1083        psy_cfg.drv_data = data;
1084        data->psy = power_supply_register(&compal_device->dev, &psy_bat_desc,
1085                                          &psy_cfg);
1086        if (IS_ERR(data->psy)) {
1087                err = PTR_ERR(data->psy);
1088                goto remove;
1089        }
1090
1091        platform_set_drvdata(pdev, data);
1092
1093        return 0;
1094
1095remove:
1096        sysfs_remove_group(&pdev->dev.kobj, &compal_platform_attr_group);
1097        return err;
1098}
1099
1100static void __exit compal_cleanup(void)
1101{
1102        platform_device_unregister(compal_device);
1103        platform_driver_unregister(&compal_driver);
1104        backlight_device_unregister(compalbl_device);
1105        rfkill_unregister(wifi_rfkill);
1106        rfkill_unregister(bt_rfkill);
1107        rfkill_destroy(wifi_rfkill);
1108        rfkill_destroy(bt_rfkill);
1109
1110        pr_info("Driver unloaded\n");
1111}
1112
1113static int compal_remove(struct platform_device *pdev)
1114{
1115        struct compal_data *data;
1116
1117        if (!extra_features)
1118                return 0;
1119
1120        pr_info("Unloading: resetting fan control to motherboard\n");
1121        pwm_disable_control();
1122
1123        data = platform_get_drvdata(pdev);
1124        power_supply_unregister(data->psy);
1125
1126        sysfs_remove_group(&pdev->dev.kobj, &compal_platform_attr_group);
1127
1128        return 0;
1129}
1130
1131
1132module_init(compal_init);
1133module_exit(compal_cleanup);
1134
1135MODULE_AUTHOR("Cezary Jackiewicz");
1136MODULE_AUTHOR("Roald Frederickx (roald.frederickx@gmail.com)");
1137MODULE_DESCRIPTION("Compal Laptop Support");
1138MODULE_VERSION(DRIVER_VERSION);
1139MODULE_LICENSE("GPL");
1140