linux/drivers/regulator/da9055-regulator.c
<<
>>
Prefs
   1/*
   2* Regulator driver for DA9055 PMIC
   3*
   4* Copyright(c) 2012 Dialog Semiconductor Ltd.
   5*
   6* Author: David Dajun Chen <dchen@diasemi.com>
   7*
   8* This program is free software; you can redistribute it and/or modify
   9* it under the terms of the GNU General Public License as published by
  10* the Free Software Foundation; either version 2 of the License, or
  11* (at your option) any later version.
  12*
  13*/
  14
  15#include <linux/module.h>
  16#include <linux/init.h>
  17#include <linux/err.h>
  18#include <linux/gpio.h>
  19#include <linux/platform_device.h>
  20#include <linux/regulator/driver.h>
  21#include <linux/regulator/machine.h>
  22#include <linux/of.h>
  23#include <linux/regulator/of_regulator.h>
  24
  25#include <linux/mfd/da9055/core.h>
  26#include <linux/mfd/da9055/reg.h>
  27#include <linux/mfd/da9055/pdata.h>
  28
  29#define DA9055_MIN_UA           0
  30#define DA9055_MAX_UA           3
  31
  32#define DA9055_LDO_MODE_SYNC    0
  33#define DA9055_LDO_MODE_SLEEP   1
  34
  35#define DA9055_BUCK_MODE_SLEEP  1
  36#define DA9055_BUCK_MODE_SYNC   2
  37#define DA9055_BUCK_MODE_AUTO   3
  38
  39/* DA9055 REGULATOR IDs */
  40#define DA9055_ID_BUCK1 0
  41#define DA9055_ID_BUCK2 1
  42#define DA9055_ID_LDO1          2
  43#define DA9055_ID_LDO2          3
  44#define DA9055_ID_LDO3          4
  45#define DA9055_ID_LDO4          5
  46#define DA9055_ID_LDO5          6
  47#define DA9055_ID_LDO6          7
  48
  49/* DA9055 BUCK current limit */
  50static const int da9055_current_limits[] = { 500000, 600000, 700000, 800000 };
  51
  52struct da9055_conf_reg {
  53        int reg;
  54        int sel_mask;
  55        int en_mask;
  56};
  57
  58struct da9055_volt_reg {
  59        int reg_a;
  60        int reg_b;
  61        int sl_shift;
  62        int v_mask;
  63};
  64
  65struct da9055_mode_reg {
  66        int reg;
  67        int mask;
  68        int shift;
  69};
  70
  71struct da9055_regulator_info {
  72        struct regulator_desc reg_desc;
  73        struct da9055_conf_reg conf;
  74        struct da9055_volt_reg volt;
  75        struct da9055_mode_reg mode;
  76};
  77
  78struct da9055_regulator {
  79        struct da9055 *da9055;
  80        struct da9055_regulator_info *info;
  81        struct regulator_dev *rdev;
  82        enum gpio_select reg_rselect;
  83};
  84
  85static unsigned int da9055_buck_get_mode(struct regulator_dev *rdev)
  86{
  87        struct da9055_regulator *regulator = rdev_get_drvdata(rdev);
  88        struct da9055_regulator_info *info = regulator->info;
  89        int ret, mode = 0;
  90
  91        ret = da9055_reg_read(regulator->da9055, info->mode.reg);
  92        if (ret < 0)
  93                return ret;
  94
  95        switch ((ret & info->mode.mask) >> info->mode.shift) {
  96        case DA9055_BUCK_MODE_SYNC:
  97                mode = REGULATOR_MODE_FAST;
  98                break;
  99        case DA9055_BUCK_MODE_AUTO:
 100                mode = REGULATOR_MODE_NORMAL;
 101                break;
 102        case DA9055_BUCK_MODE_SLEEP:
 103                mode = REGULATOR_MODE_STANDBY;
 104                break;
 105        }
 106
 107        return mode;
 108}
 109
 110static int da9055_buck_set_mode(struct regulator_dev *rdev,
 111                                        unsigned int mode)
 112{
 113        struct da9055_regulator *regulator = rdev_get_drvdata(rdev);
 114        struct da9055_regulator_info *info = regulator->info;
 115        int val = 0;
 116
 117        switch (mode) {
 118        case REGULATOR_MODE_FAST:
 119                val = DA9055_BUCK_MODE_SYNC << info->mode.shift;
 120                break;
 121        case REGULATOR_MODE_NORMAL:
 122                val = DA9055_BUCK_MODE_AUTO << info->mode.shift;
 123                break;
 124        case REGULATOR_MODE_STANDBY:
 125                val = DA9055_BUCK_MODE_SLEEP << info->mode.shift;
 126                break;
 127        }
 128
 129        return da9055_reg_update(regulator->da9055, info->mode.reg,
 130                                 info->mode.mask, val);
 131}
 132
 133static unsigned int da9055_ldo_get_mode(struct regulator_dev *rdev)
 134{
 135        struct da9055_regulator *regulator = rdev_get_drvdata(rdev);
 136        struct da9055_regulator_info *info = regulator->info;
 137        int ret;
 138
 139        ret = da9055_reg_read(regulator->da9055, info->volt.reg_b);
 140        if (ret < 0)
 141                return ret;
 142
 143        if (ret >> info->volt.sl_shift)
 144                return REGULATOR_MODE_STANDBY;
 145        else
 146                return REGULATOR_MODE_NORMAL;
 147}
 148
 149static int da9055_ldo_set_mode(struct regulator_dev *rdev, unsigned int mode)
 150{
 151        struct da9055_regulator *regulator = rdev_get_drvdata(rdev);
 152        struct da9055_regulator_info *info = regulator->info;
 153        struct da9055_volt_reg volt = info->volt;
 154        int val = 0;
 155
 156        switch (mode) {
 157        case REGULATOR_MODE_NORMAL:
 158        case REGULATOR_MODE_FAST:
 159                val = DA9055_LDO_MODE_SYNC;
 160                break;
 161        case REGULATOR_MODE_STANDBY:
 162                val = DA9055_LDO_MODE_SLEEP;
 163                break;
 164        }
 165
 166        return da9055_reg_update(regulator->da9055, volt.reg_b,
 167                                 1 << volt.sl_shift,
 168                                 val << volt.sl_shift);
 169}
 170
 171static int da9055_buck_get_current_limit(struct regulator_dev *rdev)
 172{
 173        struct da9055_regulator *regulator = rdev_get_drvdata(rdev);
 174        struct da9055_regulator_info *info = regulator->info;
 175        int ret;
 176
 177        ret = da9055_reg_read(regulator->da9055, DA9055_REG_BUCK_LIM);
 178        if (ret < 0)
 179                return ret;
 180
 181        ret &= info->mode.mask;
 182        return da9055_current_limits[ret >> info->mode.shift];
 183}
 184
 185static int da9055_buck_set_current_limit(struct regulator_dev *rdev, int min_uA,
 186                                         int max_uA)
 187{
 188        struct da9055_regulator *regulator = rdev_get_drvdata(rdev);
 189        struct da9055_regulator_info *info = regulator->info;
 190        int i;
 191
 192        for (i = ARRAY_SIZE(da9055_current_limits) - 1; i >= 0; i--) {
 193                if ((min_uA <= da9055_current_limits[i]) &&
 194                    (da9055_current_limits[i] <= max_uA))
 195                        return da9055_reg_update(regulator->da9055,
 196                                                 DA9055_REG_BUCK_LIM,
 197                                                 info->mode.mask,
 198                                                 i << info->mode.shift);
 199        }
 200
 201        return -EINVAL;
 202}
 203
 204static int da9055_regulator_get_voltage_sel(struct regulator_dev *rdev)
 205{
 206        struct da9055_regulator *regulator = rdev_get_drvdata(rdev);
 207        struct da9055_regulator_info *info = regulator->info;
 208        struct da9055_volt_reg volt = info->volt;
 209        int ret, sel;
 210
 211        /*
 212         * There are two voltage register set A & B for voltage ramping but
 213         * either one of then can be active therefore we first determine
 214         * the active register set.
 215         */
 216        ret = da9055_reg_read(regulator->da9055, info->conf.reg);
 217        if (ret < 0)
 218                return ret;
 219
 220        ret &= info->conf.sel_mask;
 221
 222        /* Get the voltage for the active register set A/B */
 223        if (ret == DA9055_REGUALTOR_SET_A)
 224                ret = da9055_reg_read(regulator->da9055, volt.reg_a);
 225        else
 226                ret = da9055_reg_read(regulator->da9055, volt.reg_b);
 227
 228        if (ret < 0)
 229                return ret;
 230
 231        sel = (ret & volt.v_mask);
 232        return sel;
 233}
 234
 235static int da9055_regulator_set_voltage_sel(struct regulator_dev *rdev,
 236                                            unsigned int selector)
 237{
 238        struct da9055_regulator *regulator = rdev_get_drvdata(rdev);
 239        struct da9055_regulator_info *info = regulator->info;
 240        int ret;
 241
 242        /*
 243         * Regulator register set A/B is not selected through GPIO therefore
 244         * we use default register set A for voltage ramping.
 245         */
 246        if (regulator->reg_rselect == NO_GPIO) {
 247                /* Select register set A */
 248                ret = da9055_reg_update(regulator->da9055, info->conf.reg,
 249                                        info->conf.sel_mask, DA9055_SEL_REG_A);
 250                if (ret < 0)
 251                        return ret;
 252
 253                /* Set the voltage */
 254                return da9055_reg_update(regulator->da9055, info->volt.reg_a,
 255                                         info->volt.v_mask, selector);
 256        }
 257
 258        /*
 259         * Here regulator register set A/B is selected through GPIO.
 260         * Therefore we first determine the selected register set A/B and
 261         * then set the desired voltage for that register set A/B.
 262         */
 263        ret = da9055_reg_read(regulator->da9055, info->conf.reg);
 264        if (ret < 0)
 265                return ret;
 266
 267        ret &= info->conf.sel_mask;
 268
 269        /* Set the voltage */
 270        if (ret == DA9055_REGUALTOR_SET_A)
 271                return da9055_reg_update(regulator->da9055, info->volt.reg_a,
 272                                         info->volt.v_mask, selector);
 273        else
 274                return da9055_reg_update(regulator->da9055, info->volt.reg_b,
 275                                         info->volt.v_mask, selector);
 276}
 277
 278static int da9055_regulator_set_suspend_voltage(struct regulator_dev *rdev,
 279                                                int uV)
 280{
 281        struct da9055_regulator *regulator = rdev_get_drvdata(rdev);
 282        struct da9055_regulator_info *info = regulator->info;
 283        int ret;
 284
 285        /* Select register set B for suspend voltage ramping. */
 286        if (regulator->reg_rselect == NO_GPIO) {
 287                ret = da9055_reg_update(regulator->da9055, info->conf.reg,
 288                                        info->conf.sel_mask, DA9055_SEL_REG_B);
 289                if (ret < 0)
 290                        return ret;
 291        }
 292
 293        ret = regulator_map_voltage_linear(rdev, uV, uV);
 294        if (ret < 0)
 295                return ret;
 296
 297        return da9055_reg_update(regulator->da9055, info->volt.reg_b,
 298                                 info->volt.v_mask, ret);
 299}
 300
 301static int da9055_suspend_enable(struct regulator_dev *rdev)
 302{
 303        struct da9055_regulator *regulator = rdev_get_drvdata(rdev);
 304        struct da9055_regulator_info *info = regulator->info;
 305
 306        /* Select register set B for voltage ramping. */
 307        if (regulator->reg_rselect == NO_GPIO)
 308                return da9055_reg_update(regulator->da9055, info->conf.reg,
 309                                        info->conf.sel_mask, DA9055_SEL_REG_B);
 310        else
 311                return 0;
 312}
 313
 314static int da9055_suspend_disable(struct regulator_dev *rdev)
 315{
 316        struct da9055_regulator *regulator = rdev_get_drvdata(rdev);
 317        struct da9055_regulator_info *info = regulator->info;
 318
 319        /* Diselect register set B. */
 320        if (regulator->reg_rselect == NO_GPIO)
 321                return da9055_reg_update(regulator->da9055, info->conf.reg,
 322                                        info->conf.sel_mask, DA9055_SEL_REG_A);
 323        else
 324                return 0;
 325}
 326
 327static const struct regulator_ops da9055_buck_ops = {
 328        .get_mode = da9055_buck_get_mode,
 329        .set_mode = da9055_buck_set_mode,
 330
 331        .get_current_limit = da9055_buck_get_current_limit,
 332        .set_current_limit = da9055_buck_set_current_limit,
 333
 334        .get_voltage_sel = da9055_regulator_get_voltage_sel,
 335        .set_voltage_sel = da9055_regulator_set_voltage_sel,
 336        .list_voltage = regulator_list_voltage_linear,
 337        .map_voltage = regulator_map_voltage_linear,
 338        .is_enabled = regulator_is_enabled_regmap,
 339        .enable = regulator_enable_regmap,
 340        .disable = regulator_disable_regmap,
 341
 342        .set_suspend_voltage = da9055_regulator_set_suspend_voltage,
 343        .set_suspend_enable = da9055_suspend_enable,
 344        .set_suspend_disable = da9055_suspend_disable,
 345        .set_suspend_mode = da9055_buck_set_mode,
 346};
 347
 348static const struct regulator_ops da9055_ldo_ops = {
 349        .get_mode = da9055_ldo_get_mode,
 350        .set_mode = da9055_ldo_set_mode,
 351
 352        .get_voltage_sel = da9055_regulator_get_voltage_sel,
 353        .set_voltage_sel = da9055_regulator_set_voltage_sel,
 354        .list_voltage = regulator_list_voltage_linear,
 355        .map_voltage = regulator_map_voltage_linear,
 356        .is_enabled = regulator_is_enabled_regmap,
 357        .enable = regulator_enable_regmap,
 358        .disable = regulator_disable_regmap,
 359
 360        .set_suspend_voltage = da9055_regulator_set_suspend_voltage,
 361        .set_suspend_enable = da9055_suspend_enable,
 362        .set_suspend_disable = da9055_suspend_disable,
 363        .set_suspend_mode = da9055_ldo_set_mode,
 364
 365};
 366
 367#define DA9055_LDO(_id, step, min, max, vbits, voffset) \
 368{\
 369        .reg_desc = {\
 370                .name = #_id,\
 371                .ops = &da9055_ldo_ops,\
 372                .type = REGULATOR_VOLTAGE,\
 373                .id = DA9055_ID_##_id,\
 374                .n_voltages = (max - min) / step + 1 + (voffset), \
 375                .enable_reg = DA9055_REG_BCORE_CONT + DA9055_ID_##_id, \
 376                .enable_mask = 1, \
 377                .min_uV = (min) * 1000,\
 378                .uV_step = (step) * 1000,\
 379                .linear_min_sel = (voffset),\
 380                .owner = THIS_MODULE,\
 381        },\
 382        .conf = {\
 383                .reg = DA9055_REG_BCORE_CONT + DA9055_ID_##_id, \
 384                .sel_mask = (1 << 4),\
 385                .en_mask = 1,\
 386        },\
 387        .volt = {\
 388                .reg_a = DA9055_REG_VBCORE_A + DA9055_ID_##_id, \
 389                .reg_b = DA9055_REG_VBCORE_B + DA9055_ID_##_id, \
 390                .sl_shift = 7,\
 391                .v_mask = (1 << (vbits)) - 1,\
 392        },\
 393}
 394
 395#define DA9055_BUCK(_id, step, min, max, vbits, voffset, mbits, sbits) \
 396{\
 397        .reg_desc = {\
 398                .name = #_id,\
 399                .ops = &da9055_buck_ops,\
 400                .type = REGULATOR_VOLTAGE,\
 401                .id = DA9055_ID_##_id,\
 402                .n_voltages = (max - min) / step + 1 + (voffset), \
 403                .enable_reg = DA9055_REG_BCORE_CONT + DA9055_ID_##_id, \
 404                .enable_mask = 1,\
 405                .min_uV = (min) * 1000,\
 406                .uV_step = (step) * 1000,\
 407                .linear_min_sel = (voffset),\
 408                .owner = THIS_MODULE,\
 409        },\
 410        .conf = {\
 411                .reg = DA9055_REG_BCORE_CONT + DA9055_ID_##_id, \
 412                .sel_mask = (1 << 4),\
 413                .en_mask = 1,\
 414        },\
 415        .volt = {\
 416                .reg_a = DA9055_REG_VBCORE_A + DA9055_ID_##_id, \
 417                .reg_b = DA9055_REG_VBCORE_B + DA9055_ID_##_id, \
 418                .sl_shift = 7,\
 419                .v_mask = (1 << (vbits)) - 1,\
 420        },\
 421        .mode = {\
 422                .reg = DA9055_REG_BCORE_MODE,\
 423                .mask = (mbits),\
 424                .shift = (sbits),\
 425        },\
 426}
 427
 428static struct da9055_regulator_info da9055_regulator_info[] = {
 429        DA9055_BUCK(BUCK1, 25, 725, 2075, 6, 9, 0xc, 2),
 430        DA9055_BUCK(BUCK2, 25, 925, 2500, 6, 0, 3, 0),
 431        DA9055_LDO(LDO1, 50, 900, 3300, 6, 2),
 432        DA9055_LDO(LDO2, 50, 900, 3300, 6, 3),
 433        DA9055_LDO(LDO3, 50, 900, 3300, 6, 2),
 434        DA9055_LDO(LDO4, 50, 900, 3300, 6, 2),
 435        DA9055_LDO(LDO5, 50, 900, 2750, 6, 2),
 436        DA9055_LDO(LDO6, 20, 900, 3300, 7, 0),
 437};
 438
 439/*
 440 * Configures regulator to be controlled either through GPIO 1 or 2.
 441 * GPIO can control regulator state and/or select the regulator register
 442 * set A/B for voltage ramping.
 443 */
 444static int da9055_gpio_init(struct da9055_regulator *regulator,
 445                            struct regulator_config *config,
 446                            struct da9055_pdata *pdata, int id)
 447{
 448        struct da9055_regulator_info *info = regulator->info;
 449        int ret = 0;
 450
 451        if (!pdata)
 452                return 0;
 453
 454        if (pdata->gpio_ren && pdata->gpio_ren[id]) {
 455                char name[18];
 456                int gpio_mux = pdata->gpio_ren[id];
 457
 458                config->ena_gpio = pdata->ena_gpio[id];
 459                config->ena_gpio_flags = GPIOF_OUT_INIT_HIGH;
 460                config->ena_gpio_invert = 1;
 461
 462                /*
 463                 * GPI pin is muxed with regulator to control the
 464                 * regulator state.
 465                 */
 466                sprintf(name, "DA9055 GPI %d", gpio_mux);
 467                ret = devm_gpio_request_one(config->dev, gpio_mux, GPIOF_DIR_IN,
 468                                            name);
 469                if (ret < 0)
 470                        goto err;
 471
 472                /*
 473                 * Let the regulator know that its state is controlled
 474                 * through GPI.
 475                 */
 476                ret = da9055_reg_update(regulator->da9055, info->conf.reg,
 477                                        DA9055_E_GPI_MASK,
 478                                        pdata->reg_ren[id]
 479                                        << DA9055_E_GPI_SHIFT);
 480                if (ret < 0)
 481                        goto err;
 482        }
 483
 484        if (pdata->gpio_rsel && pdata->gpio_rsel[id]) {
 485                char name[18];
 486                int gpio_mux = pdata->gpio_rsel[id];
 487
 488                regulator->reg_rselect = pdata->reg_rsel[id];
 489
 490                /*
 491                 * GPI pin is muxed with regulator to select the
 492                 * regulator register set A/B for voltage ramping.
 493                 */
 494                sprintf(name, "DA9055 GPI %d", gpio_mux);
 495                ret = devm_gpio_request_one(config->dev, gpio_mux, GPIOF_DIR_IN,
 496                                            name);
 497                if (ret < 0)
 498                        goto err;
 499
 500                /*
 501                 * Let the regulator know that its register set A/B
 502                 * will be selected through GPI for voltage ramping.
 503                 */
 504                ret = da9055_reg_update(regulator->da9055, info->conf.reg,
 505                                        DA9055_V_GPI_MASK,
 506                                        pdata->reg_rsel[id]
 507                                        << DA9055_V_GPI_SHIFT);
 508        }
 509
 510err:
 511        return ret;
 512}
 513
 514static irqreturn_t da9055_ldo5_6_oc_irq(int irq, void *data)
 515{
 516        struct da9055_regulator *regulator = data;
 517
 518        regulator_notifier_call_chain(regulator->rdev,
 519                                      REGULATOR_EVENT_OVER_CURRENT, NULL);
 520
 521        return IRQ_HANDLED;
 522}
 523
 524static inline struct da9055_regulator_info *find_regulator_info(int id)
 525{
 526        struct da9055_regulator_info *info;
 527        int i;
 528
 529        for (i = 0; i < ARRAY_SIZE(da9055_regulator_info); i++) {
 530                info = &da9055_regulator_info[i];
 531                if (info->reg_desc.id == id)
 532                        return info;
 533        }
 534
 535        return NULL;
 536}
 537
 538#ifdef CONFIG_OF
 539static struct of_regulator_match da9055_reg_matches[] = {
 540        { .name = "BUCK1", },
 541        { .name = "BUCK2", },
 542        { .name = "LDO1", },
 543        { .name = "LDO2", },
 544        { .name = "LDO3", },
 545        { .name = "LDO4", },
 546        { .name = "LDO5", },
 547        { .name = "LDO6", },
 548};
 549
 550static int da9055_regulator_dt_init(struct platform_device *pdev,
 551                                    struct da9055_regulator *regulator,
 552                                    struct regulator_config *config,
 553                                    int regid)
 554{
 555        struct device_node *nproot, *np;
 556        int ret;
 557
 558        nproot = of_node_get(pdev->dev.parent->of_node);
 559        if (!nproot)
 560                return -ENODEV;
 561
 562        np = of_get_child_by_name(nproot, "regulators");
 563        if (!np)
 564                return -ENODEV;
 565
 566        ret = of_regulator_match(&pdev->dev, np, &da9055_reg_matches[regid], 1);
 567        of_node_put(nproot);
 568        if (ret < 0) {
 569                dev_err(&pdev->dev, "Error matching regulator: %d\n", ret);
 570                return ret;
 571        }
 572
 573        config->init_data = da9055_reg_matches[regid].init_data;
 574        config->of_node = da9055_reg_matches[regid].of_node;
 575
 576        if (!config->of_node)
 577                return -ENODEV;
 578
 579        return 0;
 580}
 581#else
 582static inline int da9055_regulator_dt_init(struct platform_device *pdev,
 583                                       struct da9055_regulator *regulator,
 584                                       struct regulator_config *config,
 585                                       int regid)
 586{
 587        return -ENODEV;
 588}
 589#endif /* CONFIG_OF */
 590
 591static int da9055_regulator_probe(struct platform_device *pdev)
 592{
 593        struct regulator_config config = { };
 594        struct da9055_regulator *regulator;
 595        struct da9055 *da9055 = dev_get_drvdata(pdev->dev.parent);
 596        struct da9055_pdata *pdata = dev_get_platdata(da9055->dev);
 597        int ret, irq;
 598
 599        regulator = devm_kzalloc(&pdev->dev, sizeof(struct da9055_regulator),
 600                                 GFP_KERNEL);
 601        if (!regulator)
 602                return -ENOMEM;
 603
 604        regulator->info = find_regulator_info(pdev->id);
 605        if (regulator->info == NULL) {
 606                dev_err(&pdev->dev, "invalid regulator ID specified\n");
 607                return -EINVAL;
 608        }
 609
 610        regulator->da9055 = da9055;
 611        config.dev = &pdev->dev;
 612        config.driver_data = regulator;
 613        config.regmap = da9055->regmap;
 614
 615        if (pdata && pdata->regulators) {
 616                config.init_data = pdata->regulators[pdev->id];
 617        } else {
 618                ret = da9055_regulator_dt_init(pdev, regulator, &config,
 619                                               pdev->id);
 620                if (ret < 0)
 621                        return ret;
 622        }
 623
 624        ret = da9055_gpio_init(regulator, &config, pdata, pdev->id);
 625        if (ret < 0)
 626                return ret;
 627
 628        regulator->rdev = devm_regulator_register(&pdev->dev,
 629                                                  &regulator->info->reg_desc,
 630                                                  &config);
 631        if (IS_ERR(regulator->rdev)) {
 632                dev_err(&pdev->dev, "Failed to register regulator %s\n",
 633                        regulator->info->reg_desc.name);
 634                return PTR_ERR(regulator->rdev);
 635        }
 636
 637        /* Only LDO 5 and 6 has got the over current interrupt */
 638        if (pdev->id == DA9055_ID_LDO5 || pdev->id ==  DA9055_ID_LDO6) {
 639                irq = platform_get_irq_byname(pdev, "REGULATOR");
 640                if (irq < 0)
 641                        return irq;
 642
 643                ret = devm_request_threaded_irq(&pdev->dev, irq, NULL,
 644                                                da9055_ldo5_6_oc_irq,
 645                                                IRQF_TRIGGER_HIGH |
 646                                                IRQF_ONESHOT |
 647                                                IRQF_PROBE_SHARED,
 648                                                pdev->name, regulator);
 649                if (ret != 0) {
 650                        if (ret != -EBUSY) {
 651                                dev_err(&pdev->dev,
 652                                "Failed to request Regulator IRQ %d: %d\n",
 653                                irq, ret);
 654                                return ret;
 655                        }
 656                }
 657        }
 658
 659        platform_set_drvdata(pdev, regulator);
 660
 661        return 0;
 662}
 663
 664static struct platform_driver da9055_regulator_driver = {
 665        .probe = da9055_regulator_probe,
 666        .driver = {
 667                .name = "da9055-regulator",
 668        },
 669};
 670
 671static int __init da9055_regulator_init(void)
 672{
 673        return platform_driver_register(&da9055_regulator_driver);
 674}
 675subsys_initcall(da9055_regulator_init);
 676
 677static void __exit da9055_regulator_exit(void)
 678{
 679        platform_driver_unregister(&da9055_regulator_driver);
 680}
 681module_exit(da9055_regulator_exit);
 682
 683MODULE_AUTHOR("David Dajun Chen <dchen@diasemi.com>");
 684MODULE_DESCRIPTION("Power Regulator driver for Dialog DA9055 PMIC");
 685MODULE_LICENSE("GPL");
 686MODULE_ALIAS("platform:da9055-regulator");
 687