linux/drivers/regulator/hi6421-regulator.c
<<
>>
Prefs
   1/*
   2 * Device driver for regulators in Hi6421 IC
   3 *
   4 * Copyright (c) <2011-2014> HiSilicon Technologies Co., Ltd.
   5 *              http://www.hisilicon.com
   6 * Copyright (c) <2013-2014> Linaro Ltd.
   7 *              http://www.linaro.org
   8 *
   9 * Author: Guodong Xu <guodong.xu@linaro.org>
  10 *
  11 * This program is free software; you can redistribute it and/or modify
  12 * it under the terms of the GNU General Public License version 2 as
  13 * published by the Free Software Foundation.
  14 */
  15
  16#include <linux/slab.h>
  17#include <linux/device.h>
  18#include <linux/module.h>
  19#include <linux/err.h>
  20#include <linux/platform_device.h>
  21#include <linux/of.h>
  22#include <linux/regmap.h>
  23#include <linux/regulator/driver.h>
  24#include <linux/regulator/machine.h>
  25#include <linux/regulator/of_regulator.h>
  26#include <linux/mfd/hi6421-pmic.h>
  27
  28/*
  29 * struct hi6421_regulator_pdata - Hi6421 regulator data of platform device
  30 * @lock: mutex to serialize regulator enable
  31 */
  32struct hi6421_regulator_pdata {
  33        struct mutex lock;
  34};
  35
  36/*
  37 * struct hi6421_regulator_info - hi6421 regulator information
  38 * @desc: regulator description
  39 * @mode_mask: ECO mode bitmask of LDOs; for BUCKs, this masks sleep
  40 * @eco_microamp: eco mode load upper limit (in uA), valid for LDOs only
  41 */
  42struct hi6421_regulator_info {
  43        struct regulator_desc   desc;
  44        u8              mode_mask;
  45        u32             eco_microamp;
  46};
  47
  48/* HI6421 regulators */
  49enum hi6421_regulator_id {
  50        HI6421_LDO0,
  51        HI6421_LDO1,
  52        HI6421_LDO2,
  53        HI6421_LDO3,
  54        HI6421_LDO4,
  55        HI6421_LDO5,
  56        HI6421_LDO6,
  57        HI6421_LDO7,
  58        HI6421_LDO8,
  59        HI6421_LDO9,
  60        HI6421_LDO10,
  61        HI6421_LDO11,
  62        HI6421_LDO12,
  63        HI6421_LDO13,
  64        HI6421_LDO14,
  65        HI6421_LDO15,
  66        HI6421_LDO16,
  67        HI6421_LDO17,
  68        HI6421_LDO18,
  69        HI6421_LDO19,
  70        HI6421_LDO20,
  71        HI6421_LDOAUDIO,
  72        HI6421_BUCK0,
  73        HI6421_BUCK1,
  74        HI6421_BUCK2,
  75        HI6421_BUCK3,
  76        HI6421_BUCK4,
  77        HI6421_BUCK5,
  78        HI6421_NUM_REGULATORS,
  79};
  80
  81#define HI6421_REGULATOR_OF_MATCH(_name, id)                            \
  82{                                                                       \
  83        .name = #_name,                                                 \
  84        .driver_data = (void *) HI6421_##id,                            \
  85}
  86
  87static struct of_regulator_match hi6421_regulator_match[] = {
  88        HI6421_REGULATOR_OF_MATCH(hi6421_vout0, LDO0),
  89        HI6421_REGULATOR_OF_MATCH(hi6421_vout1, LDO1),
  90        HI6421_REGULATOR_OF_MATCH(hi6421_vout2, LDO2),
  91        HI6421_REGULATOR_OF_MATCH(hi6421_vout3, LDO3),
  92        HI6421_REGULATOR_OF_MATCH(hi6421_vout4, LDO4),
  93        HI6421_REGULATOR_OF_MATCH(hi6421_vout5, LDO5),
  94        HI6421_REGULATOR_OF_MATCH(hi6421_vout6, LDO6),
  95        HI6421_REGULATOR_OF_MATCH(hi6421_vout7, LDO7),
  96        HI6421_REGULATOR_OF_MATCH(hi6421_vout8, LDO8),
  97        HI6421_REGULATOR_OF_MATCH(hi6421_vout9, LDO9),
  98        HI6421_REGULATOR_OF_MATCH(hi6421_vout10, LDO10),
  99        HI6421_REGULATOR_OF_MATCH(hi6421_vout11, LDO11),
 100        HI6421_REGULATOR_OF_MATCH(hi6421_vout12, LDO12),
 101        HI6421_REGULATOR_OF_MATCH(hi6421_vout13, LDO13),
 102        HI6421_REGULATOR_OF_MATCH(hi6421_vout14, LDO14),
 103        HI6421_REGULATOR_OF_MATCH(hi6421_vout15, LDO15),
 104        HI6421_REGULATOR_OF_MATCH(hi6421_vout16, LDO16),
 105        HI6421_REGULATOR_OF_MATCH(hi6421_vout17, LDO17),
 106        HI6421_REGULATOR_OF_MATCH(hi6421_vout18, LDO18),
 107        HI6421_REGULATOR_OF_MATCH(hi6421_vout19, LDO19),
 108        HI6421_REGULATOR_OF_MATCH(hi6421_vout20, LDO20),
 109        HI6421_REGULATOR_OF_MATCH(hi6421_vout_audio, LDOAUDIO),
 110        HI6421_REGULATOR_OF_MATCH(hi6421_buck0, BUCK0),
 111        HI6421_REGULATOR_OF_MATCH(hi6421_buck1, BUCK1),
 112        HI6421_REGULATOR_OF_MATCH(hi6421_buck2, BUCK2),
 113        HI6421_REGULATOR_OF_MATCH(hi6421_buck3, BUCK3),
 114        HI6421_REGULATOR_OF_MATCH(hi6421_buck4, BUCK4),
 115        HI6421_REGULATOR_OF_MATCH(hi6421_buck5, BUCK5),
 116};
 117
 118/* LDO 0, 4~7, 9~14, 16~20 have same voltage table. */
 119static const unsigned int ldo_0_voltages[] = {
 120        1500000, 1800000, 2400000, 2500000,
 121        2600000, 2700000, 2850000, 3000000,
 122};
 123
 124/* LDO 8, 15 have same voltage table. */
 125static const unsigned int ldo_8_voltages[] = {
 126        1500000, 1800000, 2400000, 2600000,
 127        2700000, 2850000, 3000000, 3300000,
 128};
 129
 130/* Ranges are sorted in ascending order. */
 131static const struct regulator_linear_range ldo_audio_volt_range[] = {
 132        REGULATOR_LINEAR_RANGE(2800000, 0, 3, 50000),
 133        REGULATOR_LINEAR_RANGE(3000000, 4, 7, 100000),
 134};
 135
 136static const unsigned int buck_3_voltages[] = {
 137         950000, 1050000, 1100000, 1117000,
 138        1134000, 1150000, 1167000, 1200000,
 139};
 140
 141static const unsigned int buck_4_voltages[] = {
 142        1150000, 1200000, 1250000, 1350000,
 143        1700000, 1800000, 1900000, 2000000,
 144};
 145
 146static const unsigned int buck_5_voltages[] = {
 147        1150000, 1200000, 1250000, 1350000,
 148        1600000, 1700000, 1800000, 1900000,
 149};
 150
 151static const struct regulator_ops hi6421_ldo_ops;
 152static const struct regulator_ops hi6421_ldo_linear_ops;
 153static const struct regulator_ops hi6421_ldo_linear_range_ops;
 154static const struct regulator_ops hi6421_buck012_ops;
 155static const struct regulator_ops hi6421_buck345_ops;
 156
 157#define HI6421_LDO_ENABLE_TIME (350)
 158/*
 159 * _id - LDO id name string
 160 * v_table - voltage table
 161 * vreg - voltage select register
 162 * vmask - voltage select mask
 163 * ereg - enable register
 164 * emask - enable mask
 165 * odelay - off/on delay time in uS
 166 * ecomask - eco mode mask
 167 * ecoamp - eco mode load uppler limit in uA
 168 */
 169#define HI6421_LDO(_id, v_table, vreg, vmask, ereg, emask,              \
 170                   odelay, ecomask, ecoamp)                             \
 171        [HI6421_##_id] = {                                              \
 172                .desc = {                                               \
 173                        .name           = #_id,                         \
 174                        .ops            = &hi6421_ldo_ops,              \
 175                        .type           = REGULATOR_VOLTAGE,            \
 176                        .id             = HI6421_##_id,                 \
 177                        .owner          = THIS_MODULE,                  \
 178                        .n_voltages     = ARRAY_SIZE(v_table),          \
 179                        .volt_table     = v_table,                      \
 180                        .vsel_reg       = HI6421_REG_TO_BUS_ADDR(vreg), \
 181                        .vsel_mask      = vmask,                        \
 182                        .enable_reg     = HI6421_REG_TO_BUS_ADDR(ereg), \
 183                        .enable_mask    = emask,                        \
 184                        .enable_time    = HI6421_LDO_ENABLE_TIME,       \
 185                        .off_on_delay   = odelay,                       \
 186                },                                                      \
 187                .mode_mask              = ecomask,                      \
 188                .eco_microamp           = ecoamp,                       \
 189        }
 190
 191/* HI6421 LDO1~3 are linear voltage regulators at fixed uV_step
 192 *
 193 * _id - LDO id name string
 194 * _min_uV - minimum voltage supported in uV
 195 * n_volt - number of votages available
 196 * vstep - voltage increase in each linear step in uV
 197 * vreg - voltage select register
 198 * vmask - voltage select mask
 199 * ereg - enable register
 200 * emask - enable mask
 201 * odelay - off/on delay time in uS
 202 * ecomask - eco mode mask
 203 * ecoamp - eco mode load uppler limit in uA
 204 */
 205#define HI6421_LDO_LINEAR(_id, _min_uV, n_volt, vstep, vreg, vmask,     \
 206                          ereg, emask, odelay, ecomask, ecoamp)         \
 207        [HI6421_##_id] = {                                              \
 208                .desc = {                                               \
 209                        .name           = #_id,                         \
 210                        .ops            = &hi6421_ldo_linear_ops,       \
 211                        .type           = REGULATOR_VOLTAGE,            \
 212                        .id             = HI6421_##_id,                 \
 213                        .owner          = THIS_MODULE,                  \
 214                        .min_uV         = _min_uV,                      \
 215                        .n_voltages     = n_volt,                       \
 216                        .uV_step        = vstep,                        \
 217                        .vsel_reg       = HI6421_REG_TO_BUS_ADDR(vreg), \
 218                        .vsel_mask      = vmask,                        \
 219                        .enable_reg     = HI6421_REG_TO_BUS_ADDR(ereg), \
 220                        .enable_mask    = emask,                        \
 221                        .enable_time    = HI6421_LDO_ENABLE_TIME,       \
 222                        .off_on_delay   = odelay,                       \
 223                },                                                      \
 224                .mode_mask              = ecomask,                      \
 225                .eco_microamp           = ecoamp,                       \
 226        }
 227
 228/* HI6421 LDOAUDIO is a linear voltage regulator with two 4-step ranges
 229 *
 230 * _id - LDO id name string
 231 * n_volt - number of votages available
 232 * volt_ranges - array of regulator_linear_range
 233 * vstep - voltage increase in each linear step in uV
 234 * vreg - voltage select register
 235 * vmask - voltage select mask
 236 * ereg - enable register
 237 * emask - enable mask
 238 * odelay - off/on delay time in uS
 239 * ecomask - eco mode mask
 240 * ecoamp - eco mode load uppler limit in uA
 241 */
 242#define HI6421_LDO_LINEAR_RANGE(_id, n_volt, volt_ranges, vreg, vmask,  \
 243                                ereg, emask, odelay, ecomask, ecoamp)   \
 244        [HI6421_##_id] = {                                              \
 245                .desc = {                                               \
 246                        .name           = #_id,                         \
 247                        .ops            = &hi6421_ldo_linear_range_ops, \
 248                        .type           = REGULATOR_VOLTAGE,            \
 249                        .id             = HI6421_##_id,                 \
 250                        .owner          = THIS_MODULE,                  \
 251                        .n_voltages     = n_volt,                       \
 252                        .linear_ranges  = volt_ranges,                  \
 253                        .n_linear_ranges = ARRAY_SIZE(volt_ranges),     \
 254                        .vsel_reg       = HI6421_REG_TO_BUS_ADDR(vreg), \
 255                        .vsel_mask      = vmask,                        \
 256                        .enable_reg     = HI6421_REG_TO_BUS_ADDR(ereg), \
 257                        .enable_mask    = emask,                        \
 258                        .enable_time    = HI6421_LDO_ENABLE_TIME,       \
 259                        .off_on_delay   = odelay,                       \
 260                },                                                      \
 261                .mode_mask              = ecomask,                      \
 262                .eco_microamp           = ecoamp,                       \
 263        }
 264
 265/* HI6421 BUCK0/1/2 are linear voltage regulators at fixed uV_step
 266 *
 267 * _id - BUCK0/1/2 id name string
 268 * vreg - voltage select register
 269 * vmask - voltage select mask
 270 * ereg - enable register
 271 * emask - enable mask
 272 * sleepmask - mask of sleep mode
 273 * etime - enable time
 274 * odelay - off/on delay time in uS
 275 */
 276#define HI6421_BUCK012(_id, vreg, vmask, ereg, emask, sleepmask,        \
 277                        etime, odelay)                                  \
 278        [HI6421_##_id] = {                                              \
 279                .desc = {                                               \
 280                        .name           = #_id,                         \
 281                        .ops            = &hi6421_buck012_ops,          \
 282                        .type           = REGULATOR_VOLTAGE,            \
 283                        .id             = HI6421_##_id,                 \
 284                        .owner          = THIS_MODULE,                  \
 285                        .min_uV         = 700000,                       \
 286                        .n_voltages     = 128,                          \
 287                        .uV_step        = 7086,                         \
 288                        .vsel_reg       = HI6421_REG_TO_BUS_ADDR(vreg), \
 289                        .vsel_mask      = vmask,                        \
 290                        .enable_reg     = HI6421_REG_TO_BUS_ADDR(ereg), \
 291                        .enable_mask    = emask,                        \
 292                        .enable_time    = etime,                        \
 293                        .off_on_delay   = odelay,                       \
 294                },                                                      \
 295                .mode_mask              = sleepmask,                    \
 296        }
 297
 298/* HI6421 BUCK3/4/5 share similar configurations as LDOs, with exception
 299 *  that it supports SLEEP mode, so has different .ops.
 300 *
 301 * _id - LDO id name string
 302 * v_table - voltage table
 303 * vreg - voltage select register
 304 * vmask - voltage select mask
 305 * ereg - enable register
 306 * emask - enable mask
 307 * odelay - off/on delay time in uS
 308 * sleepmask - mask of sleep mode
 309 */
 310#define HI6421_BUCK345(_id, v_table, vreg, vmask, ereg, emask,          \
 311                        odelay, sleepmask)                              \
 312        [HI6421_##_id] = {                                              \
 313                .desc = {                                               \
 314                        .name           = #_id,                         \
 315                        .ops            = &hi6421_buck345_ops,          \
 316                        .type           = REGULATOR_VOLTAGE,            \
 317                        .id             = HI6421_##_id,                 \
 318                        .owner          = THIS_MODULE,                  \
 319                        .n_voltages     = ARRAY_SIZE(v_table),          \
 320                        .volt_table     = v_table,                      \
 321                        .vsel_reg       = HI6421_REG_TO_BUS_ADDR(vreg), \
 322                        .vsel_mask      = vmask,                        \
 323                        .enable_reg     = HI6421_REG_TO_BUS_ADDR(ereg), \
 324                        .enable_mask    = emask,                        \
 325                        .enable_time    = HI6421_LDO_ENABLE_TIME,       \
 326                        .off_on_delay   = odelay,                       \
 327                },                                                      \
 328                .mode_mask              = sleepmask,                    \
 329        }
 330
 331/* HI6421 regulator information */
 332static struct hi6421_regulator_info
 333                hi6421_regulator_info[HI6421_NUM_REGULATORS] = {
 334        HI6421_LDO(LDO0, ldo_0_voltages, 0x20, 0x07, 0x20, 0x10,
 335                   10000, 0x20, 8000),
 336        HI6421_LDO_LINEAR(LDO1, 1700000, 4, 100000, 0x21, 0x03, 0x21, 0x10,
 337                          10000, 0x20, 5000),
 338        HI6421_LDO_LINEAR(LDO2, 1050000, 8, 50000, 0x22, 0x07, 0x22, 0x10,
 339                          20000, 0x20, 8000),
 340        HI6421_LDO_LINEAR(LDO3, 1050000, 8, 50000, 0x23, 0x07, 0x23, 0x10,
 341                          20000, 0x20, 8000),
 342        HI6421_LDO(LDO4, ldo_0_voltages, 0x24, 0x07, 0x24, 0x10,
 343                   20000, 0x20, 8000),
 344        HI6421_LDO(LDO5, ldo_0_voltages, 0x25, 0x07, 0x25, 0x10,
 345                   20000, 0x20, 8000),
 346        HI6421_LDO(LDO6, ldo_0_voltages, 0x26, 0x07, 0x26, 0x10,
 347                   20000, 0x20, 8000),
 348        HI6421_LDO(LDO7, ldo_0_voltages, 0x27, 0x07, 0x27, 0x10,
 349                   20000, 0x20, 5000),
 350        HI6421_LDO(LDO8, ldo_8_voltages, 0x28, 0x07, 0x28, 0x10,
 351                   20000, 0x20, 8000),
 352        HI6421_LDO(LDO9, ldo_0_voltages, 0x29, 0x07, 0x29, 0x10,
 353                   40000, 0x20, 8000),
 354        HI6421_LDO(LDO10, ldo_0_voltages, 0x2a, 0x07, 0x2a, 0x10,
 355                   40000, 0x20, 8000),
 356        HI6421_LDO(LDO11, ldo_0_voltages, 0x2b, 0x07, 0x2b, 0x10,
 357                   40000, 0x20, 8000),
 358        HI6421_LDO(LDO12, ldo_0_voltages, 0x2c, 0x07, 0x2c, 0x10,
 359                   40000, 0x20, 8000),
 360        HI6421_LDO(LDO13, ldo_0_voltages, 0x2d, 0x07, 0x2d, 0x10,
 361                   40000, 0x20, 8000),
 362        HI6421_LDO(LDO14, ldo_0_voltages, 0x2e, 0x07, 0x2e, 0x10,
 363                   40000, 0x20, 8000),
 364        HI6421_LDO(LDO15, ldo_8_voltages, 0x2f, 0x07, 0x2f, 0x10,
 365                   40000, 0x20, 8000),
 366        HI6421_LDO(LDO16, ldo_0_voltages, 0x30, 0x07, 0x30, 0x10,
 367                   40000, 0x20, 8000),
 368        HI6421_LDO(LDO17, ldo_0_voltages, 0x31, 0x07, 0x31, 0x10,
 369                   40000, 0x20, 8000),
 370        HI6421_LDO(LDO18, ldo_0_voltages, 0x32, 0x07, 0x32, 0x10,
 371                   40000, 0x20, 8000),
 372        HI6421_LDO(LDO19, ldo_0_voltages, 0x33, 0x07, 0x33, 0x10,
 373                   40000, 0x20, 8000),
 374        HI6421_LDO(LDO20, ldo_0_voltages, 0x34, 0x07, 0x34, 0x10,
 375                   40000, 0x20, 8000),
 376        HI6421_LDO_LINEAR_RANGE(LDOAUDIO, 8, ldo_audio_volt_range, 0x36,
 377                                0x70, 0x36, 0x01, 40000, 0x02, 5000),
 378        HI6421_BUCK012(BUCK0, 0x0d, 0x7f, 0x0c, 0x01, 0x10, 400, 20000),
 379        HI6421_BUCK012(BUCK1, 0x0f, 0x7f, 0x0e, 0x01, 0x10, 400, 20000),
 380        HI6421_BUCK012(BUCK2, 0x11, 0x7f, 0x10, 0x01, 0x10, 350, 100),
 381        HI6421_BUCK345(BUCK3, buck_3_voltages, 0x13, 0x07, 0x12, 0x01,
 382                       20000, 0x10),
 383        HI6421_BUCK345(BUCK4, buck_4_voltages, 0x15, 0x07, 0x14, 0x01,
 384                       20000, 0x10),
 385        HI6421_BUCK345(BUCK5, buck_5_voltages, 0x17, 0x07, 0x16, 0x01,
 386                       20000, 0x10),
 387};
 388
 389static int hi6421_regulator_enable(struct regulator_dev *rdev)
 390{
 391        struct hi6421_regulator_pdata *pdata;
 392
 393        pdata = dev_get_drvdata(rdev->dev.parent);
 394        /* hi6421 spec requires regulator enablement must be serialized:
 395         *  - Because when BUCK, LDO switching from off to on, it will have
 396         *    a huge instantaneous current; so you can not turn on two or
 397         *    more LDO or BUCKs simultaneously, or it may burn the chip.
 398         */
 399        mutex_lock(&pdata->lock);
 400
 401        /* call regulator regmap helper */
 402        regulator_enable_regmap(rdev);
 403
 404        mutex_unlock(&pdata->lock);
 405        return 0;
 406}
 407
 408static unsigned int hi6421_regulator_ldo_get_mode(struct regulator_dev *rdev)
 409{
 410        struct hi6421_regulator_info *info = rdev_get_drvdata(rdev);
 411        u32 reg_val;
 412
 413        regmap_read(rdev->regmap, rdev->desc->enable_reg, &reg_val);
 414        if (reg_val & info->mode_mask)
 415                return REGULATOR_MODE_IDLE;
 416
 417        return REGULATOR_MODE_NORMAL;
 418}
 419
 420static unsigned int hi6421_regulator_buck_get_mode(struct regulator_dev *rdev)
 421{
 422        struct hi6421_regulator_info *info = rdev_get_drvdata(rdev);
 423        u32 reg_val;
 424
 425        regmap_read(rdev->regmap, rdev->desc->enable_reg, &reg_val);
 426        if (reg_val & info->mode_mask)
 427                return REGULATOR_MODE_STANDBY;
 428
 429        return REGULATOR_MODE_NORMAL;
 430}
 431
 432static int hi6421_regulator_ldo_set_mode(struct regulator_dev *rdev,
 433                                                unsigned int mode)
 434{
 435        struct hi6421_regulator_info *info = rdev_get_drvdata(rdev);
 436        u32 new_mode;
 437
 438        switch (mode) {
 439        case REGULATOR_MODE_NORMAL:
 440                new_mode = 0;
 441                break;
 442        case REGULATOR_MODE_IDLE:
 443                new_mode = info->mode_mask;
 444                break;
 445        default:
 446                return -EINVAL;
 447        }
 448
 449        /* set mode */
 450        regmap_update_bits(rdev->regmap, rdev->desc->enable_reg,
 451                           info->mode_mask, new_mode);
 452
 453        return 0;
 454}
 455
 456static int hi6421_regulator_buck_set_mode(struct regulator_dev *rdev,
 457                                                unsigned int mode)
 458{
 459        struct hi6421_regulator_info *info = rdev_get_drvdata(rdev);
 460        u32 new_mode;
 461
 462        switch (mode) {
 463        case REGULATOR_MODE_NORMAL:
 464                new_mode = 0;
 465                break;
 466        case REGULATOR_MODE_STANDBY:
 467                new_mode = info->mode_mask;
 468                break;
 469        default:
 470                return -EINVAL;
 471        }
 472
 473        /* set mode */
 474        regmap_update_bits(rdev->regmap, rdev->desc->enable_reg,
 475                           info->mode_mask, new_mode);
 476
 477        return 0;
 478}
 479
 480unsigned int hi6421_regulator_ldo_get_optimum_mode(struct regulator_dev *rdev,
 481                        int input_uV, int output_uV, int load_uA)
 482{
 483        struct hi6421_regulator_info *info = rdev_get_drvdata(rdev);
 484
 485        if (load_uA > info->eco_microamp)
 486                return REGULATOR_MODE_NORMAL;
 487
 488        return REGULATOR_MODE_IDLE;
 489}
 490
 491static const struct regulator_ops hi6421_ldo_ops = {
 492        .is_enabled = regulator_is_enabled_regmap,
 493        .enable = hi6421_regulator_enable,
 494        .disable = regulator_disable_regmap,
 495        .list_voltage = regulator_list_voltage_table,
 496        .map_voltage = regulator_map_voltage_ascend,
 497        .get_voltage_sel = regulator_get_voltage_sel_regmap,
 498        .set_voltage_sel = regulator_set_voltage_sel_regmap,
 499        .get_mode = hi6421_regulator_ldo_get_mode,
 500        .set_mode = hi6421_regulator_ldo_set_mode,
 501        .get_optimum_mode = hi6421_regulator_ldo_get_optimum_mode,
 502};
 503
 504static const struct regulator_ops hi6421_ldo_linear_ops = {
 505        .is_enabled = regulator_is_enabled_regmap,
 506        .enable = hi6421_regulator_enable,
 507        .disable = regulator_disable_regmap,
 508        .list_voltage = regulator_list_voltage_linear,
 509        .map_voltage = regulator_map_voltage_linear,
 510        .get_voltage_sel = regulator_get_voltage_sel_regmap,
 511        .set_voltage_sel = regulator_set_voltage_sel_regmap,
 512        .get_mode = hi6421_regulator_ldo_get_mode,
 513        .set_mode = hi6421_regulator_ldo_set_mode,
 514        .get_optimum_mode = hi6421_regulator_ldo_get_optimum_mode,
 515};
 516
 517static const struct regulator_ops hi6421_ldo_linear_range_ops = {
 518        .is_enabled = regulator_is_enabled_regmap,
 519        .enable = hi6421_regulator_enable,
 520        .disable = regulator_disable_regmap,
 521        .list_voltage = regulator_list_voltage_linear_range,
 522        .map_voltage = regulator_map_voltage_linear_range,
 523        .get_voltage_sel = regulator_get_voltage_sel_regmap,
 524        .set_voltage_sel = regulator_set_voltage_sel_regmap,
 525        .get_mode = hi6421_regulator_ldo_get_mode,
 526        .set_mode = hi6421_regulator_ldo_set_mode,
 527        .get_optimum_mode = hi6421_regulator_ldo_get_optimum_mode,
 528};
 529
 530static const struct regulator_ops hi6421_buck012_ops = {
 531        .is_enabled = regulator_is_enabled_regmap,
 532        .enable = hi6421_regulator_enable,
 533        .disable = regulator_disable_regmap,
 534        .list_voltage = regulator_list_voltage_linear,
 535        .map_voltage = regulator_map_voltage_linear,
 536        .get_voltage_sel = regulator_get_voltage_sel_regmap,
 537        .set_voltage_sel = regulator_set_voltage_sel_regmap,
 538        .get_mode = hi6421_regulator_buck_get_mode,
 539        .set_mode = hi6421_regulator_buck_set_mode,
 540};
 541
 542static const struct regulator_ops hi6421_buck345_ops = {
 543        .is_enabled = regulator_is_enabled_regmap,
 544        .enable = hi6421_regulator_enable,
 545        .disable = regulator_disable_regmap,
 546        .list_voltage = regulator_list_voltage_table,
 547        .map_voltage = regulator_map_voltage_ascend,
 548        .get_voltage_sel = regulator_get_voltage_sel_regmap,
 549        .set_voltage_sel = regulator_set_voltage_sel_regmap,
 550        .get_mode = hi6421_regulator_buck_get_mode,
 551        .set_mode = hi6421_regulator_buck_set_mode,
 552};
 553
 554static int hi6421_regulator_register(struct platform_device *pdev,
 555                                     struct regmap *rmap,
 556                                     struct regulator_init_data *init_data,
 557                                     int id, struct device_node *np)
 558{
 559        struct hi6421_regulator_info *info = NULL;
 560        struct regulator_config config = { };
 561        struct regulator_dev *rdev;
 562
 563        /* assign per-regulator data */
 564        info = &hi6421_regulator_info[id];
 565
 566        config.dev = &pdev->dev;
 567        config.init_data = init_data;
 568        config.driver_data = info;
 569        config.regmap = rmap;
 570        config.of_node = np;
 571
 572        /* register regulator with framework */
 573        rdev = devm_regulator_register(&pdev->dev, &info->desc, &config);
 574        if (IS_ERR(rdev)) {
 575                dev_err(&pdev->dev, "failed to register regulator %s\n",
 576                        info->desc.name);
 577                return PTR_ERR(rdev);
 578        }
 579
 580        return 0;
 581}
 582
 583static int hi6421_regulator_probe(struct platform_device *pdev)
 584{
 585        struct device *dev = &pdev->dev;
 586        struct device_node *np;
 587        struct hi6421_pmic *pmic;
 588        struct hi6421_regulator_pdata *pdata;
 589        int i, ret = 0;
 590
 591        pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL);
 592        if (!pdata)
 593                return -ENOMEM;
 594        mutex_init(&pdata->lock);
 595        platform_set_drvdata(pdev, pdata);
 596
 597        np = of_get_child_by_name(dev->parent->of_node, "regulators");
 598        if (!np)
 599                return -ENODEV;
 600
 601        ret = of_regulator_match(dev, np,
 602                                 hi6421_regulator_match,
 603                                 ARRAY_SIZE(hi6421_regulator_match));
 604        of_node_put(np);
 605        if (ret < 0) {
 606                dev_err(dev, "Error parsing regulator init data: %d\n", ret);
 607                return ret;
 608        }
 609
 610        pmic = dev_get_drvdata(dev->parent);
 611
 612        for (i = 0; i < ARRAY_SIZE(hi6421_regulator_info); i++) {
 613                ret = hi6421_regulator_register(pdev, pmic->regmap,
 614                        hi6421_regulator_match[i].init_data, i,
 615                        hi6421_regulator_match[i].of_node);
 616                if (ret)
 617                        return ret;
 618        }
 619
 620        return 0;
 621}
 622
 623static struct platform_driver hi6421_regulator_driver = {
 624        .driver = {
 625                .name   = "hi6421-regulator",
 626        },
 627        .probe  = hi6421_regulator_probe,
 628};
 629module_platform_driver(hi6421_regulator_driver);
 630
 631MODULE_AUTHOR("Guodong Xu <guodong.xu@linaro.org>");
 632MODULE_DESCRIPTION("Hi6421 regulator driver");
 633MODULE_LICENSE("GPL v2");
 634