linux/drivers/rtc/rtc-isl1208.c
<<
>>
Prefs
   1/*
   2 * Intersil ISL1208 rtc class driver
   3 *
   4 * Copyright 2005,2006 Hebert Valerio Riedel <hvr@gnu.org>
   5 *
   6 *  This program is free software; you can redistribute  it and/or modify it
   7 *  under  the terms of  the GNU General  Public License as published by the
   8 *  Free Software Foundation;  either version 2 of the  License, or (at your
   9 *  option) any later version.
  10 *
  11 */
  12
  13#include <linux/module.h>
  14#include <linux/i2c.h>
  15#include <linux/bcd.h>
  16#include <linux/rtc.h>
  17
  18#define DRV_VERSION "0.3"
  19
  20/* Register map */
  21/* rtc section */
  22#define ISL1208_REG_SC  0x00
  23#define ISL1208_REG_MN  0x01
  24#define ISL1208_REG_HR  0x02
  25#define ISL1208_REG_HR_MIL     (1<<7)   /* 24h/12h mode */
  26#define ISL1208_REG_HR_PM      (1<<5)   /* PM/AM bit in 12h mode */
  27#define ISL1208_REG_DT  0x03
  28#define ISL1208_REG_MO  0x04
  29#define ISL1208_REG_YR  0x05
  30#define ISL1208_REG_DW  0x06
  31#define ISL1208_RTC_SECTION_LEN 7
  32
  33/* control/status section */
  34#define ISL1208_REG_SR  0x07
  35#define ISL1208_REG_SR_ARST    (1<<7)   /* auto reset */
  36#define ISL1208_REG_SR_XTOSCB  (1<<6)   /* crystal oscillator */
  37#define ISL1208_REG_SR_WRTC    (1<<4)   /* write rtc */
  38#define ISL1208_REG_SR_ALM     (1<<2)   /* alarm */
  39#define ISL1208_REG_SR_BAT     (1<<1)   /* battery */
  40#define ISL1208_REG_SR_RTCF    (1<<0)   /* rtc fail */
  41#define ISL1208_REG_INT 0x08
  42#define ISL1208_REG_INT_ALME   (1<<6)   /* alarm enable */
  43#define ISL1208_REG_INT_IM     (1<<7)   /* interrupt/alarm mode */
  44#define ISL1208_REG_09  0x09    /* reserved */
  45#define ISL1208_REG_ATR 0x0a
  46#define ISL1208_REG_DTR 0x0b
  47
  48/* alarm section */
  49#define ISL1208_REG_SCA 0x0c
  50#define ISL1208_REG_MNA 0x0d
  51#define ISL1208_REG_HRA 0x0e
  52#define ISL1208_REG_DTA 0x0f
  53#define ISL1208_REG_MOA 0x10
  54#define ISL1208_REG_DWA 0x11
  55#define ISL1208_ALARM_SECTION_LEN 6
  56
  57/* user section */
  58#define ISL1208_REG_USR1 0x12
  59#define ISL1208_REG_USR2 0x13
  60#define ISL1208_USR_SECTION_LEN 2
  61
  62static struct i2c_driver isl1208_driver;
  63
  64/* block read */
  65static int
  66isl1208_i2c_read_regs(struct i2c_client *client, u8 reg, u8 buf[],
  67                      unsigned len)
  68{
  69        u8 reg_addr[1] = { reg };
  70        struct i2c_msg msgs[2] = {
  71                {
  72                        .addr = client->addr,
  73                        .len = sizeof(reg_addr),
  74                        .buf = reg_addr
  75                },
  76                {
  77                        .addr = client->addr,
  78                        .flags = I2C_M_RD,
  79                        .len = len,
  80                        .buf = buf
  81                }
  82        };
  83        int ret;
  84
  85        BUG_ON(reg > ISL1208_REG_USR2);
  86        BUG_ON(reg + len > ISL1208_REG_USR2 + 1);
  87
  88        ret = i2c_transfer(client->adapter, msgs, 2);
  89        if (ret > 0)
  90                ret = 0;
  91        return ret;
  92}
  93
  94/* block write */
  95static int
  96isl1208_i2c_set_regs(struct i2c_client *client, u8 reg, u8 const buf[],
  97                     unsigned len)
  98{
  99        u8 i2c_buf[ISL1208_REG_USR2 + 2];
 100        struct i2c_msg msgs[1] = {
 101                {
 102                        .addr = client->addr,
 103                        .len = len + 1,
 104                        .buf = i2c_buf
 105                }
 106        };
 107        int ret;
 108
 109        BUG_ON(reg > ISL1208_REG_USR2);
 110        BUG_ON(reg + len > ISL1208_REG_USR2 + 1);
 111
 112        i2c_buf[0] = reg;
 113        memcpy(&i2c_buf[1], &buf[0], len);
 114
 115        ret = i2c_transfer(client->adapter, msgs, 1);
 116        if (ret > 0)
 117                ret = 0;
 118        return ret;
 119}
 120
 121/* simple check to see whether we have a isl1208 */
 122static int
 123isl1208_i2c_validate_client(struct i2c_client *client)
 124{
 125        u8 regs[ISL1208_RTC_SECTION_LEN] = { 0, };
 126        u8 zero_mask[ISL1208_RTC_SECTION_LEN] = {
 127                0x80, 0x80, 0x40, 0xc0, 0xe0, 0x00, 0xf8
 128        };
 129        int i;
 130        int ret;
 131
 132        ret = isl1208_i2c_read_regs(client, 0, regs, ISL1208_RTC_SECTION_LEN);
 133        if (ret < 0)
 134                return ret;
 135
 136        for (i = 0; i < ISL1208_RTC_SECTION_LEN; ++i) {
 137                if (regs[i] & zero_mask[i])     /* check if bits are cleared */
 138                        return -ENODEV;
 139        }
 140
 141        return 0;
 142}
 143
 144static int
 145isl1208_i2c_get_sr(struct i2c_client *client)
 146{
 147        return i2c_smbus_read_byte_data(client, ISL1208_REG_SR);
 148}
 149
 150static int
 151isl1208_i2c_get_atr(struct i2c_client *client)
 152{
 153        int atr = i2c_smbus_read_byte_data(client, ISL1208_REG_ATR);
 154        if (atr < 0)
 155                return atr;
 156
 157        /* The 6bit value in the ATR register controls the load
 158         * capacitance C_load * in steps of 0.25pF
 159         *
 160         * bit (1<<5) of the ATR register is inverted
 161         *
 162         * C_load(ATR=0x20) =  4.50pF
 163         * C_load(ATR=0x00) = 12.50pF
 164         * C_load(ATR=0x1f) = 20.25pF
 165         *
 166         */
 167
 168        atr &= 0x3f;            /* mask out lsb */
 169        atr ^= 1 << 5;          /* invert 6th bit */
 170        atr += 2 * 9;           /* add offset of 4.5pF; unit[atr] = 0.25pF */
 171
 172        return atr;
 173}
 174
 175static int
 176isl1208_i2c_get_dtr(struct i2c_client *client)
 177{
 178        int dtr = i2c_smbus_read_byte_data(client, ISL1208_REG_DTR);
 179        if (dtr < 0)
 180                return -EIO;
 181
 182        /* dtr encodes adjustments of {-60,-40,-20,0,20,40,60} ppm */
 183        dtr = ((dtr & 0x3) * 20) * (dtr & (1 << 2) ? -1 : 1);
 184
 185        return dtr;
 186}
 187
 188static int
 189isl1208_i2c_get_usr(struct i2c_client *client)
 190{
 191        u8 buf[ISL1208_USR_SECTION_LEN] = { 0, };
 192        int ret;
 193
 194        ret = isl1208_i2c_read_regs(client, ISL1208_REG_USR1, buf,
 195                                    ISL1208_USR_SECTION_LEN);
 196        if (ret < 0)
 197                return ret;
 198
 199        return (buf[1] << 8) | buf[0];
 200}
 201
 202static int
 203isl1208_i2c_set_usr(struct i2c_client *client, u16 usr)
 204{
 205        u8 buf[ISL1208_USR_SECTION_LEN];
 206
 207        buf[0] = usr & 0xff;
 208        buf[1] = (usr >> 8) & 0xff;
 209
 210        return isl1208_i2c_set_regs(client, ISL1208_REG_USR1, buf,
 211                                    ISL1208_USR_SECTION_LEN);
 212}
 213
 214static int
 215isl1208_rtc_toggle_alarm(struct i2c_client *client, int enable)
 216{
 217        int icr = i2c_smbus_read_byte_data(client, ISL1208_REG_INT);
 218
 219        if (icr < 0) {
 220                dev_err(&client->dev, "%s: reading INT failed\n", __func__);
 221                return icr;
 222        }
 223
 224        if (enable)
 225                icr |= ISL1208_REG_INT_ALME | ISL1208_REG_INT_IM;
 226        else
 227                icr &= ~(ISL1208_REG_INT_ALME | ISL1208_REG_INT_IM);
 228
 229        icr = i2c_smbus_write_byte_data(client, ISL1208_REG_INT, icr);
 230        if (icr < 0) {
 231                dev_err(&client->dev, "%s: writing INT failed\n", __func__);
 232                return icr;
 233        }
 234
 235        return 0;
 236}
 237
 238static int
 239isl1208_rtc_proc(struct device *dev, struct seq_file *seq)
 240{
 241        struct i2c_client *const client = to_i2c_client(dev);
 242        int sr, dtr, atr, usr;
 243
 244        sr = isl1208_i2c_get_sr(client);
 245        if (sr < 0) {
 246                dev_err(&client->dev, "%s: reading SR failed\n", __func__);
 247                return sr;
 248        }
 249
 250        seq_printf(seq, "status_reg\t:%s%s%s%s%s%s (0x%.2x)\n",
 251                   (sr & ISL1208_REG_SR_RTCF) ? " RTCF" : "",
 252                   (sr & ISL1208_REG_SR_BAT) ? " BAT" : "",
 253                   (sr & ISL1208_REG_SR_ALM) ? " ALM" : "",
 254                   (sr & ISL1208_REG_SR_WRTC) ? " WRTC" : "",
 255                   (sr & ISL1208_REG_SR_XTOSCB) ? " XTOSCB" : "",
 256                   (sr & ISL1208_REG_SR_ARST) ? " ARST" : "", sr);
 257
 258        seq_printf(seq, "batt_status\t: %s\n",
 259                   (sr & ISL1208_REG_SR_RTCF) ? "bad" : "okay");
 260
 261        dtr = isl1208_i2c_get_dtr(client);
 262        if (dtr >= 0 - 1)
 263                seq_printf(seq, "digital_trim\t: %d ppm\n", dtr);
 264
 265        atr = isl1208_i2c_get_atr(client);
 266        if (atr >= 0)
 267                seq_printf(seq, "analog_trim\t: %d.%.2d pF\n",
 268                           atr >> 2, (atr & 0x3) * 25);
 269
 270        usr = isl1208_i2c_get_usr(client);
 271        if (usr >= 0)
 272                seq_printf(seq, "user_data\t: 0x%.4x\n", usr);
 273
 274        return 0;
 275}
 276
 277static int
 278isl1208_i2c_read_time(struct i2c_client *client, struct rtc_time *tm)
 279{
 280        int sr;
 281        u8 regs[ISL1208_RTC_SECTION_LEN] = { 0, };
 282
 283        sr = isl1208_i2c_get_sr(client);
 284        if (sr < 0) {
 285                dev_err(&client->dev, "%s: reading SR failed\n", __func__);
 286                return -EIO;
 287        }
 288
 289        sr = isl1208_i2c_read_regs(client, 0, regs, ISL1208_RTC_SECTION_LEN);
 290        if (sr < 0) {
 291                dev_err(&client->dev, "%s: reading RTC section failed\n",
 292                        __func__);
 293                return sr;
 294        }
 295
 296        tm->tm_sec = bcd2bin(regs[ISL1208_REG_SC]);
 297        tm->tm_min = bcd2bin(regs[ISL1208_REG_MN]);
 298
 299        /* HR field has a more complex interpretation */
 300        {
 301                const u8 _hr = regs[ISL1208_REG_HR];
 302                if (_hr & ISL1208_REG_HR_MIL)   /* 24h format */
 303                        tm->tm_hour = bcd2bin(_hr & 0x3f);
 304                else {
 305                        /* 12h format */
 306                        tm->tm_hour = bcd2bin(_hr & 0x1f);
 307                        if (_hr & ISL1208_REG_HR_PM)    /* PM flag set */
 308                                tm->tm_hour += 12;
 309                }
 310        }
 311
 312        tm->tm_mday = bcd2bin(regs[ISL1208_REG_DT]);
 313        tm->tm_mon = bcd2bin(regs[ISL1208_REG_MO]) - 1; /* rtc starts at 1 */
 314        tm->tm_year = bcd2bin(regs[ISL1208_REG_YR]) + 100;
 315        tm->tm_wday = bcd2bin(regs[ISL1208_REG_DW]);
 316
 317        return 0;
 318}
 319
 320static int
 321isl1208_i2c_read_alarm(struct i2c_client *client, struct rtc_wkalrm *alarm)
 322{
 323        struct rtc_time *const tm = &alarm->time;
 324        u8 regs[ISL1208_ALARM_SECTION_LEN] = { 0, };
 325        int icr, yr, sr = isl1208_i2c_get_sr(client);
 326
 327        if (sr < 0) {
 328                dev_err(&client->dev, "%s: reading SR failed\n", __func__);
 329                return sr;
 330        }
 331
 332        sr = isl1208_i2c_read_regs(client, ISL1208_REG_SCA, regs,
 333                                   ISL1208_ALARM_SECTION_LEN);
 334        if (sr < 0) {
 335                dev_err(&client->dev, "%s: reading alarm section failed\n",
 336                        __func__);
 337                return sr;
 338        }
 339
 340        /* MSB of each alarm register is an enable bit */
 341        tm->tm_sec = bcd2bin(regs[ISL1208_REG_SCA - ISL1208_REG_SCA] & 0x7f);
 342        tm->tm_min = bcd2bin(regs[ISL1208_REG_MNA - ISL1208_REG_SCA] & 0x7f);
 343        tm->tm_hour = bcd2bin(regs[ISL1208_REG_HRA - ISL1208_REG_SCA] & 0x3f);
 344        tm->tm_mday = bcd2bin(regs[ISL1208_REG_DTA - ISL1208_REG_SCA] & 0x3f);
 345        tm->tm_mon =
 346                bcd2bin(regs[ISL1208_REG_MOA - ISL1208_REG_SCA] & 0x1f) - 1;
 347        tm->tm_wday = bcd2bin(regs[ISL1208_REG_DWA - ISL1208_REG_SCA] & 0x03);
 348
 349        /* The alarm doesn't store the year so get it from the rtc section */
 350        yr = i2c_smbus_read_byte_data(client, ISL1208_REG_YR);
 351        if (yr < 0) {
 352                dev_err(&client->dev, "%s: reading RTC YR failed\n", __func__);
 353                return yr;
 354        }
 355        tm->tm_year = bcd2bin(yr) + 100;
 356
 357        icr = i2c_smbus_read_byte_data(client, ISL1208_REG_INT);
 358        if (icr < 0) {
 359                dev_err(&client->dev, "%s: reading INT failed\n", __func__);
 360                return icr;
 361        }
 362        alarm->enabled = !!(icr & ISL1208_REG_INT_ALME);
 363
 364        return 0;
 365}
 366
 367static int
 368isl1208_i2c_set_alarm(struct i2c_client *client, struct rtc_wkalrm *alarm)
 369{
 370        struct rtc_time *alarm_tm = &alarm->time;
 371        u8 regs[ISL1208_ALARM_SECTION_LEN] = { 0, };
 372        const int offs = ISL1208_REG_SCA;
 373        struct rtc_time rtc_tm;
 374        int err, enable;
 375
 376        err = isl1208_i2c_read_time(client, &rtc_tm);
 377        if (err)
 378                return err;
 379
 380        /* If the alarm time is before the current time disable the alarm */
 381        if (!alarm->enabled || rtc_tm_sub(alarm_tm, &rtc_tm) <= 0)
 382                enable = 0x00;
 383        else
 384                enable = 0x80;
 385
 386        /* Program the alarm and enable it for each setting */
 387        regs[ISL1208_REG_SCA - offs] = bin2bcd(alarm_tm->tm_sec) | enable;
 388        regs[ISL1208_REG_MNA - offs] = bin2bcd(alarm_tm->tm_min) | enable;
 389        regs[ISL1208_REG_HRA - offs] = bin2bcd(alarm_tm->tm_hour) |
 390                ISL1208_REG_HR_MIL | enable;
 391
 392        regs[ISL1208_REG_DTA - offs] = bin2bcd(alarm_tm->tm_mday) | enable;
 393        regs[ISL1208_REG_MOA - offs] = bin2bcd(alarm_tm->tm_mon + 1) | enable;
 394        regs[ISL1208_REG_DWA - offs] = bin2bcd(alarm_tm->tm_wday & 7) | enable;
 395
 396        /* write ALARM registers */
 397        err = isl1208_i2c_set_regs(client, offs, regs,
 398                                  ISL1208_ALARM_SECTION_LEN);
 399        if (err < 0) {
 400                dev_err(&client->dev, "%s: writing ALARM section failed\n",
 401                        __func__);
 402                return err;
 403        }
 404
 405        err = isl1208_rtc_toggle_alarm(client, enable);
 406        if (err)
 407                return err;
 408
 409        return 0;
 410}
 411
 412static int
 413isl1208_rtc_read_time(struct device *dev, struct rtc_time *tm)
 414{
 415        return isl1208_i2c_read_time(to_i2c_client(dev), tm);
 416}
 417
 418static int
 419isl1208_i2c_set_time(struct i2c_client *client, struct rtc_time const *tm)
 420{
 421        int sr;
 422        u8 regs[ISL1208_RTC_SECTION_LEN] = { 0, };
 423
 424        /* The clock has an 8 bit wide bcd-coded register (they never learn)
 425         * for the year. tm_year is an offset from 1900 and we are interested
 426         * in the 2000-2099 range, so any value less than 100 is invalid.
 427         */
 428        if (tm->tm_year < 100)
 429                return -EINVAL;
 430
 431        regs[ISL1208_REG_SC] = bin2bcd(tm->tm_sec);
 432        regs[ISL1208_REG_MN] = bin2bcd(tm->tm_min);
 433        regs[ISL1208_REG_HR] = bin2bcd(tm->tm_hour) | ISL1208_REG_HR_MIL;
 434
 435        regs[ISL1208_REG_DT] = bin2bcd(tm->tm_mday);
 436        regs[ISL1208_REG_MO] = bin2bcd(tm->tm_mon + 1);
 437        regs[ISL1208_REG_YR] = bin2bcd(tm->tm_year - 100);
 438
 439        regs[ISL1208_REG_DW] = bin2bcd(tm->tm_wday & 7);
 440
 441        sr = isl1208_i2c_get_sr(client);
 442        if (sr < 0) {
 443                dev_err(&client->dev, "%s: reading SR failed\n", __func__);
 444                return sr;
 445        }
 446
 447        /* set WRTC */
 448        sr = i2c_smbus_write_byte_data(client, ISL1208_REG_SR,
 449                                       sr | ISL1208_REG_SR_WRTC);
 450        if (sr < 0) {
 451                dev_err(&client->dev, "%s: writing SR failed\n", __func__);
 452                return sr;
 453        }
 454
 455        /* write RTC registers */
 456        sr = isl1208_i2c_set_regs(client, 0, regs, ISL1208_RTC_SECTION_LEN);
 457        if (sr < 0) {
 458                dev_err(&client->dev, "%s: writing RTC section failed\n",
 459                        __func__);
 460                return sr;
 461        }
 462
 463        /* clear WRTC again */
 464        sr = i2c_smbus_write_byte_data(client, ISL1208_REG_SR,
 465                                       sr & ~ISL1208_REG_SR_WRTC);
 466        if (sr < 0) {
 467                dev_err(&client->dev, "%s: writing SR failed\n", __func__);
 468                return sr;
 469        }
 470
 471        return 0;
 472}
 473
 474
 475static int
 476isl1208_rtc_set_time(struct device *dev, struct rtc_time *tm)
 477{
 478        return isl1208_i2c_set_time(to_i2c_client(dev), tm);
 479}
 480
 481static int
 482isl1208_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alarm)
 483{
 484        return isl1208_i2c_read_alarm(to_i2c_client(dev), alarm);
 485}
 486
 487static int
 488isl1208_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alarm)
 489{
 490        return isl1208_i2c_set_alarm(to_i2c_client(dev), alarm);
 491}
 492
 493static irqreturn_t
 494isl1208_rtc_interrupt(int irq, void *data)
 495{
 496        unsigned long timeout = jiffies + msecs_to_jiffies(1000);
 497        struct i2c_client *client = data;
 498        struct rtc_device *rtc = i2c_get_clientdata(client);
 499        int handled = 0, sr, err;
 500
 501        /*
 502         * I2C reads get NAK'ed if we read straight away after an interrupt?
 503         * Using a mdelay/msleep didn't seem to help either, so we work around
 504         * this by continually trying to read the register for a short time.
 505         */
 506        while (1) {
 507                sr = isl1208_i2c_get_sr(client);
 508                if (sr >= 0)
 509                        break;
 510
 511                if (time_after(jiffies, timeout)) {
 512                        dev_err(&client->dev, "%s: reading SR failed\n",
 513                                __func__);
 514                        return sr;
 515                }
 516        }
 517
 518        if (sr & ISL1208_REG_SR_ALM) {
 519                dev_dbg(&client->dev, "alarm!\n");
 520
 521                rtc_update_irq(rtc, 1, RTC_IRQF | RTC_AF);
 522
 523                /* Clear the alarm */
 524                sr &= ~ISL1208_REG_SR_ALM;
 525                sr = i2c_smbus_write_byte_data(client, ISL1208_REG_SR, sr);
 526                if (sr < 0)
 527                        dev_err(&client->dev, "%s: writing SR failed\n",
 528                                __func__);
 529                else
 530                        handled = 1;
 531
 532                /* Disable the alarm */
 533                err = isl1208_rtc_toggle_alarm(client, 0);
 534                if (err)
 535                        return err;
 536        }
 537
 538        return handled ? IRQ_HANDLED : IRQ_NONE;
 539}
 540
 541static const struct rtc_class_ops isl1208_rtc_ops = {
 542        .proc = isl1208_rtc_proc,
 543        .read_time = isl1208_rtc_read_time,
 544        .set_time = isl1208_rtc_set_time,
 545        .read_alarm = isl1208_rtc_read_alarm,
 546        .set_alarm = isl1208_rtc_set_alarm,
 547};
 548
 549/* sysfs interface */
 550
 551static ssize_t
 552isl1208_sysfs_show_atrim(struct device *dev,
 553                         struct device_attribute *attr, char *buf)
 554{
 555        int atr = isl1208_i2c_get_atr(to_i2c_client(dev));
 556        if (atr < 0)
 557                return atr;
 558
 559        return sprintf(buf, "%d.%.2d pF\n", atr >> 2, (atr & 0x3) * 25);
 560}
 561
 562static DEVICE_ATTR(atrim, S_IRUGO, isl1208_sysfs_show_atrim, NULL);
 563
 564static ssize_t
 565isl1208_sysfs_show_dtrim(struct device *dev,
 566                         struct device_attribute *attr, char *buf)
 567{
 568        int dtr = isl1208_i2c_get_dtr(to_i2c_client(dev));
 569        if (dtr < 0)
 570                return dtr;
 571
 572        return sprintf(buf, "%d ppm\n", dtr);
 573}
 574
 575static DEVICE_ATTR(dtrim, S_IRUGO, isl1208_sysfs_show_dtrim, NULL);
 576
 577static ssize_t
 578isl1208_sysfs_show_usr(struct device *dev,
 579                       struct device_attribute *attr, char *buf)
 580{
 581        int usr = isl1208_i2c_get_usr(to_i2c_client(dev));
 582        if (usr < 0)
 583                return usr;
 584
 585        return sprintf(buf, "0x%.4x\n", usr);
 586}
 587
 588static ssize_t
 589isl1208_sysfs_store_usr(struct device *dev,
 590                        struct device_attribute *attr,
 591                        const char *buf, size_t count)
 592{
 593        int usr = -1;
 594
 595        if (buf[0] == '0' && (buf[1] == 'x' || buf[1] == 'X')) {
 596                if (sscanf(buf, "%x", &usr) != 1)
 597                        return -EINVAL;
 598        } else {
 599                if (sscanf(buf, "%d", &usr) != 1)
 600                        return -EINVAL;
 601        }
 602
 603        if (usr < 0 || usr > 0xffff)
 604                return -EINVAL;
 605
 606        return isl1208_i2c_set_usr(to_i2c_client(dev), usr) ? -EIO : count;
 607}
 608
 609static DEVICE_ATTR(usr, S_IRUGO | S_IWUSR, isl1208_sysfs_show_usr,
 610                   isl1208_sysfs_store_usr);
 611
 612static struct attribute *isl1208_rtc_attrs[] = {
 613        &dev_attr_atrim.attr,
 614        &dev_attr_dtrim.attr,
 615        &dev_attr_usr.attr,
 616        NULL
 617};
 618
 619static const struct attribute_group isl1208_rtc_sysfs_files = {
 620        .attrs  = isl1208_rtc_attrs,
 621};
 622
 623static int
 624isl1208_probe(struct i2c_client *client, const struct i2c_device_id *id)
 625{
 626        int rc = 0;
 627        struct rtc_device *rtc;
 628
 629        if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C))
 630                return -ENODEV;
 631
 632        if (isl1208_i2c_validate_client(client) < 0)
 633                return -ENODEV;
 634
 635        dev_info(&client->dev,
 636                 "chip found, driver version " DRV_VERSION "\n");
 637
 638        if (client->irq > 0) {
 639                rc = devm_request_threaded_irq(&client->dev, client->irq, NULL,
 640                                               isl1208_rtc_interrupt,
 641                                               IRQF_SHARED | IRQF_ONESHOT,
 642                                               isl1208_driver.driver.name,
 643                                               client);
 644                if (!rc) {
 645                        device_init_wakeup(&client->dev, 1);
 646                        enable_irq_wake(client->irq);
 647                } else {
 648                        dev_err(&client->dev,
 649                                "Unable to request irq %d, no alarm support\n",
 650                                client->irq);
 651                        client->irq = 0;
 652                }
 653        }
 654
 655        rtc = devm_rtc_device_register(&client->dev, isl1208_driver.driver.name,
 656                                  &isl1208_rtc_ops,
 657                                  THIS_MODULE);
 658        if (IS_ERR(rtc))
 659                return PTR_ERR(rtc);
 660
 661        i2c_set_clientdata(client, rtc);
 662
 663        rc = isl1208_i2c_get_sr(client);
 664        if (rc < 0) {
 665                dev_err(&client->dev, "reading status failed\n");
 666                return rc;
 667        }
 668
 669        if (rc & ISL1208_REG_SR_RTCF)
 670                dev_warn(&client->dev, "rtc power failure detected, "
 671                         "please set clock.\n");
 672
 673        rc = sysfs_create_group(&client->dev.kobj, &isl1208_rtc_sysfs_files);
 674        if (rc)
 675                return rc;
 676
 677        return 0;
 678}
 679
 680static int
 681isl1208_remove(struct i2c_client *client)
 682{
 683        sysfs_remove_group(&client->dev.kobj, &isl1208_rtc_sysfs_files);
 684
 685        return 0;
 686}
 687
 688static const struct i2c_device_id isl1208_id[] = {
 689        { "isl1208", 0 },
 690        { "isl1218", 0 },
 691        { }
 692};
 693MODULE_DEVICE_TABLE(i2c, isl1208_id);
 694
 695static struct i2c_driver isl1208_driver = {
 696        .driver = {
 697                   .name = "rtc-isl1208",
 698                   },
 699        .probe = isl1208_probe,
 700        .remove = isl1208_remove,
 701        .id_table = isl1208_id,
 702};
 703
 704module_i2c_driver(isl1208_driver);
 705
 706MODULE_AUTHOR("Herbert Valerio Riedel <hvr@gnu.org>");
 707MODULE_DESCRIPTION("Intersil ISL1208 RTC driver");
 708MODULE_LICENSE("GPL");
 709MODULE_VERSION(DRV_VERSION);
 710