LXR linux/drivers/s390/cio/cio.h

   1#ifndef S390_CIO_H
   2#define S390_CIO_H
   3
   4#include <linux/mutex.h>
   5#include <linux/device.h>
   6#include <linux/mod_devicetable.h>
   7#include <asm/chpid.h>
   8#include <asm/cio.h>
   9#include <asm/fcx.h>
  10#include <asm/schid.h>
  11#include "chsc.h"
  12
  13/*
  14 * path management control word
  15 */
  16struct pmcw {
  17        u32 intparm;            /* interruption parameter */
  18        u32 qf   : 1;           /* qdio facility */
  19        u32 w    : 1;
  20        u32 isc  : 3;           /* interruption sublass */
  21        u32 res5 : 3;           /* reserved zeros */
  22        u32 ena  : 1;           /* enabled */
  23        u32 lm   : 2;           /* limit mode */
  24        u32 mme  : 2;           /* measurement-mode enable */
  25        u32 mp   : 1;           /* multipath mode */
  26        u32 tf   : 1;           /* timing facility */
  27        u32 dnv  : 1;           /* device number valid */
  28        u32 dev  : 16;          /* device number */
  29        u8  lpm;                /* logical path mask */
  30        u8  pnom;               /* path not operational mask */
  31        u8  lpum;               /* last path used mask */
  32        u8  pim;                /* path installed mask */
  33        u16 mbi;                /* measurement-block index */
  34        u8  pom;                /* path operational mask */
  35        u8  pam;                /* path available mask */
  36        u8  chpid[8];           /* CHPID 0-7 (if available) */
  37        u32 unused1 : 8;        /* reserved zeros */
  38        u32 st      : 3;        /* subchannel type */
  39        u32 unused2 : 18;       /* reserved zeros */
  40        u32 mbfc    : 1;        /* measurement block format control */
  41        u32 xmwme   : 1;        /* extended measurement word mode enable */
  42        u32 csense  : 1;        /* concurrent sense; can be enabled ...*/
  43                                /*  ... per MSCH, however, if facility */
  44                                /*  ... is not installed, this results */
  45                                /*  ... in an operand exception.       */
  46} __attribute__ ((packed));
  47
  48/* I/O-Interruption Code as stored by TEST PENDING INTERRUPTION (TPI). */
  49struct tpi_info {
  50        struct subchannel_id schid;
  51        u32 intparm;
  52        u32 adapter_IO:1;
  53        u32 :1;
  54        u32 isc:3;
  55        u32 :27;
  56        u32 type:3;
  57        u32 :12;
  58} __packed __aligned(4);
  59
  60/* Target SCHIB configuration. */
  61struct schib_config {
  62        u64 mba;
  63        u32 intparm;
  64        u16 mbi;
  65        u32 isc:3;
  66        u32 ena:1;
  67        u32 mme:2;
  68        u32 mp:1;
  69        u32 csense:1;
  70        u32 mbfc:1;
  71} __attribute__ ((packed));
  72
  73/*
  74 * subchannel information block
  75 */
  76struct schib {
  77        struct pmcw pmcw;        /* path management control word */
  78        union scsw scsw;         /* subchannel status word */
  79        __u64 mba;               /* measurement block address */
  80        __u8 mda[4];             /* model dependent area */
  81} __attribute__ ((packed,aligned(4)));
  82
  83/*
  84 * When rescheduled, todo's with higher values will overwrite those
  85 * with lower values.
  86 */
  87enum sch_todo {
  88        SCH_TODO_NOTHING,
  89        SCH_TODO_EVAL,
  90        SCH_TODO_UNREG,
  91};
  92
  93/* subchannel data structure used by I/O subroutines */
  94struct subchannel {
  95        struct subchannel_id schid;
  96        spinlock_t *lock;       /* subchannel lock */
  97        struct mutex reg_mutex;
  98        enum {
  99                SUBCHANNEL_TYPE_IO = 0,
 100                SUBCHANNEL_TYPE_CHSC = 1,
 101                SUBCHANNEL_TYPE_MSG = 2,
 102                SUBCHANNEL_TYPE_ADM = 3,
 103        } st;                   /* subchannel type */
 104        __u8 vpm;               /* verified path mask */
 105        __u8 lpm;               /* logical path mask */
 106        __u8 opm;               /* operational path mask */
 107        struct schib schib;     /* subchannel information block */
 108        int isc; /* desired interruption subclass */
 109        struct chsc_ssd_info ssd_info;  /* subchannel description */
 110        struct device dev;      /* entry in device tree */
 111        struct css_driver *driver;
 112        enum sch_todo todo;
 113        struct work_struct todo_work;
 114        struct schib_config config;
 115} __attribute__ ((aligned(8)));
 116
 117DECLARE_PER_CPU(struct irb, cio_irb);
 118
 119#define to_subchannel(n) container_of(n, struct subchannel, dev)
 120
 121extern int cio_validate_subchannel (struct subchannel *, struct subchannel_id);
 122extern int cio_enable_subchannel(struct subchannel *, u32);
 123extern int cio_disable_subchannel (struct subchannel *);
 124extern int cio_cancel (struct subchannel *);
 125extern int cio_clear (struct subchannel *);
 126extern int cio_resume (struct subchannel *);
 127extern int cio_halt (struct subchannel *);
 128extern int cio_start (struct subchannel *, struct ccw1 *, __u8);
 129extern int cio_start_key (struct subchannel *, struct ccw1 *, __u8, __u8);
 130extern int cio_cancel (struct subchannel *);
 131extern int cio_set_options (struct subchannel *, int);
 132extern int cio_update_schib(struct subchannel *sch);
 133extern int cio_commit_config(struct subchannel *sch);
 134
 135int cio_tm_start_key(struct subchannel *sch, struct tcw *tcw, u8 lpm, u8 key);
 136int cio_tm_intrg(struct subchannel *sch);
 137
 138/* Use with care. */
 139#ifdef CONFIG_CCW_CONSOLE
 140extern struct subchannel *cio_probe_console(void);
 141extern int cio_is_console(struct subchannel_id);
 142extern void cio_register_early_subchannels(void);
 143extern void cio_tsch(struct subchannel *sch);
 144#else
 145#define cio_is_console(schid) 0
 146static inline void cio_register_early_subchannels(void) {}
 147#endif
 148
 149#endif
 150