linux/drivers/scsi/aacraid/aachba.c
<<
>>
Prefs
   1/*
   2 *      Adaptec AAC series RAID controller driver
   3 *      (c) Copyright 2001 Red Hat Inc.
   4 *
   5 * based on the old aacraid driver that is..
   6 * Adaptec aacraid device driver for Linux.
   7 *
   8 * Copyright (c) 2000-2010 Adaptec, Inc.
   9 *               2010 PMC-Sierra, Inc. (aacraid@pmc-sierra.com)
  10 *
  11 * This program is free software; you can redistribute it and/or modify
  12 * it under the terms of the GNU General Public License as published by
  13 * the Free Software Foundation; either version 2, or (at your option)
  14 * any later version.
  15 *
  16 * This program is distributed in the hope that it will be useful,
  17 * but WITHOUT ANY WARRANTY; without even the implied warranty of
  18 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  19 * GNU General Public License for more details.
  20 *
  21 * You should have received a copy of the GNU General Public License
  22 * along with this program; see the file COPYING.  If not, write to
  23 * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
  24 *
  25 */
  26
  27#include <linux/kernel.h>
  28#include <linux/init.h>
  29#include <linux/types.h>
  30#include <linux/pci.h>
  31#include <linux/spinlock.h>
  32#include <linux/slab.h>
  33#include <linux/completion.h>
  34#include <linux/blkdev.h>
  35#include <asm/uaccess.h>
  36#include <linux/highmem.h> /* For flush_kernel_dcache_page */
  37#include <linux/module.h>
  38
  39#include <scsi/scsi.h>
  40#include <scsi/scsi_cmnd.h>
  41#include <scsi/scsi_device.h>
  42#include <scsi/scsi_host.h>
  43
  44#include "aacraid.h"
  45
  46/* values for inqd_pdt: Peripheral device type in plain English */
  47#define INQD_PDT_DA     0x00    /* Direct-access (DISK) device */
  48#define INQD_PDT_PROC   0x03    /* Processor device */
  49#define INQD_PDT_CHNGR  0x08    /* Changer (jukebox, scsi2) */
  50#define INQD_PDT_COMM   0x09    /* Communication device (scsi2) */
  51#define INQD_PDT_NOLUN2 0x1f    /* Unknown Device (scsi2) */
  52#define INQD_PDT_NOLUN  0x7f    /* Logical Unit Not Present */
  53
  54#define INQD_PDT_DMASK  0x1F    /* Peripheral Device Type Mask */
  55#define INQD_PDT_QMASK  0xE0    /* Peripheral Device Qualifer Mask */
  56
  57/*
  58 *      Sense codes
  59 */
  60
  61#define SENCODE_NO_SENSE                        0x00
  62#define SENCODE_END_OF_DATA                     0x00
  63#define SENCODE_BECOMING_READY                  0x04
  64#define SENCODE_INIT_CMD_REQUIRED               0x04
  65#define SENCODE_PARAM_LIST_LENGTH_ERROR         0x1A
  66#define SENCODE_INVALID_COMMAND                 0x20
  67#define SENCODE_LBA_OUT_OF_RANGE                0x21
  68#define SENCODE_INVALID_CDB_FIELD               0x24
  69#define SENCODE_LUN_NOT_SUPPORTED               0x25
  70#define SENCODE_INVALID_PARAM_FIELD             0x26
  71#define SENCODE_PARAM_NOT_SUPPORTED             0x26
  72#define SENCODE_PARAM_VALUE_INVALID             0x26
  73#define SENCODE_RESET_OCCURRED                  0x29
  74#define SENCODE_LUN_NOT_SELF_CONFIGURED_YET     0x3E
  75#define SENCODE_INQUIRY_DATA_CHANGED            0x3F
  76#define SENCODE_SAVING_PARAMS_NOT_SUPPORTED     0x39
  77#define SENCODE_DIAGNOSTIC_FAILURE              0x40
  78#define SENCODE_INTERNAL_TARGET_FAILURE         0x44
  79#define SENCODE_INVALID_MESSAGE_ERROR           0x49
  80#define SENCODE_LUN_FAILED_SELF_CONFIG          0x4c
  81#define SENCODE_OVERLAPPED_COMMAND              0x4E
  82
  83/*
  84 *      Additional sense codes
  85 */
  86
  87#define ASENCODE_NO_SENSE                       0x00
  88#define ASENCODE_END_OF_DATA                    0x05
  89#define ASENCODE_BECOMING_READY                 0x01
  90#define ASENCODE_INIT_CMD_REQUIRED              0x02
  91#define ASENCODE_PARAM_LIST_LENGTH_ERROR        0x00
  92#define ASENCODE_INVALID_COMMAND                0x00
  93#define ASENCODE_LBA_OUT_OF_RANGE               0x00
  94#define ASENCODE_INVALID_CDB_FIELD              0x00
  95#define ASENCODE_LUN_NOT_SUPPORTED              0x00
  96#define ASENCODE_INVALID_PARAM_FIELD            0x00
  97#define ASENCODE_PARAM_NOT_SUPPORTED            0x01
  98#define ASENCODE_PARAM_VALUE_INVALID            0x02
  99#define ASENCODE_RESET_OCCURRED                 0x00
 100#define ASENCODE_LUN_NOT_SELF_CONFIGURED_YET    0x00
 101#define ASENCODE_INQUIRY_DATA_CHANGED           0x03
 102#define ASENCODE_SAVING_PARAMS_NOT_SUPPORTED    0x00
 103#define ASENCODE_DIAGNOSTIC_FAILURE             0x80
 104#define ASENCODE_INTERNAL_TARGET_FAILURE        0x00
 105#define ASENCODE_INVALID_MESSAGE_ERROR          0x00
 106#define ASENCODE_LUN_FAILED_SELF_CONFIG         0x00
 107#define ASENCODE_OVERLAPPED_COMMAND             0x00
 108
 109#define BYTE0(x) (unsigned char)(x)
 110#define BYTE1(x) (unsigned char)((x) >> 8)
 111#define BYTE2(x) (unsigned char)((x) >> 16)
 112#define BYTE3(x) (unsigned char)((x) >> 24)
 113
 114/* MODE_SENSE data format */
 115typedef struct {
 116        struct {
 117                u8      data_length;
 118                u8      med_type;
 119                u8      dev_par;
 120                u8      bd_length;
 121        } __attribute__((packed)) hd;
 122        struct {
 123                u8      dens_code;
 124                u8      block_count[3];
 125                u8      reserved;
 126                u8      block_length[3];
 127        } __attribute__((packed)) bd;
 128                u8      mpc_buf[3];
 129} __attribute__((packed)) aac_modep_data;
 130
 131/* MODE_SENSE_10 data format */
 132typedef struct {
 133        struct {
 134                u8      data_length[2];
 135                u8      med_type;
 136                u8      dev_par;
 137                u8      rsrvd[2];
 138                u8      bd_length[2];
 139        } __attribute__((packed)) hd;
 140        struct {
 141                u8      dens_code;
 142                u8      block_count[3];
 143                u8      reserved;
 144                u8      block_length[3];
 145        } __attribute__((packed)) bd;
 146                u8      mpc_buf[3];
 147} __attribute__((packed)) aac_modep10_data;
 148
 149/*------------------------------------------------------------------------------
 150 *              S T R U C T S / T Y P E D E F S
 151 *----------------------------------------------------------------------------*/
 152/* SCSI inquiry data */
 153struct inquiry_data {
 154        u8 inqd_pdt;    /* Peripheral qualifier | Peripheral Device Type */
 155        u8 inqd_dtq;    /* RMB | Device Type Qualifier */
 156        u8 inqd_ver;    /* ISO version | ECMA version | ANSI-approved version */
 157        u8 inqd_rdf;    /* AENC | TrmIOP | Response data format */
 158        u8 inqd_len;    /* Additional length (n-4) */
 159        u8 inqd_pad1[2];/* Reserved - must be zero */
 160        u8 inqd_pad2;   /* RelAdr | WBus32 | WBus16 |  Sync  | Linked |Reserved| CmdQue | SftRe */
 161        u8 inqd_vid[8]; /* Vendor ID */
 162        u8 inqd_pid[16];/* Product ID */
 163        u8 inqd_prl[4]; /* Product Revision Level */
 164};
 165
 166/* Added for VPD 0x83 */
 167typedef struct {
 168        u8 CodeSet:4;   /* VPD_CODE_SET */
 169        u8 Reserved:4;
 170        u8 IdentifierType:4;    /* VPD_IDENTIFIER_TYPE */
 171        u8 Reserved2:4;
 172        u8 Reserved3;
 173        u8 IdentifierLength;
 174        u8 VendId[8];
 175        u8 ProductId[16];
 176        u8 SerialNumber[8];     /* SN in ASCII */
 177
 178} TVPD_ID_Descriptor_Type_1;
 179
 180typedef struct {
 181        u8 CodeSet:4;   /* VPD_CODE_SET */
 182        u8 Reserved:4;
 183        u8 IdentifierType:4;    /* VPD_IDENTIFIER_TYPE */
 184        u8 Reserved2:4;
 185        u8 Reserved3;
 186        u8 IdentifierLength;
 187        struct TEU64Id {
 188                u32 Serial;
 189                 /* The serial number supposed to be 40 bits,
 190                  * bit we only support 32, so make the last byte zero. */
 191                u8 Reserved;
 192                u8 VendId[3];
 193        } EU64Id;
 194
 195} TVPD_ID_Descriptor_Type_2;
 196
 197typedef struct {
 198        u8 DeviceType:5;
 199        u8 DeviceTypeQualifier:3;
 200        u8 PageCode;
 201        u8 Reserved;
 202        u8 PageLength;
 203        TVPD_ID_Descriptor_Type_1 IdDescriptorType1;
 204        TVPD_ID_Descriptor_Type_2 IdDescriptorType2;
 205
 206} TVPD_Page83;
 207
 208/*
 209 *              M O D U L E   G L O B A L S
 210 */
 211
 212static long aac_build_sg(struct scsi_cmnd *scsicmd, struct sgmap *sgmap);
 213static long aac_build_sg64(struct scsi_cmnd *scsicmd, struct sgmap64 *psg);
 214static long aac_build_sgraw(struct scsi_cmnd *scsicmd, struct sgmapraw *psg);
 215static long aac_build_sgraw2(struct scsi_cmnd *scsicmd,
 216                                struct aac_raw_io2 *rio2, int sg_max);
 217static int aac_convert_sgraw2(struct aac_raw_io2 *rio2,
 218                                int pages, int nseg, int nseg_new);
 219static int aac_send_srb_fib(struct scsi_cmnd* scsicmd);
 220#ifdef AAC_DETAILED_STATUS_INFO
 221static char *aac_get_status_string(u32 status);
 222#endif
 223
 224/*
 225 *      Non dasd selection is handled entirely in aachba now
 226 */
 227
 228static int nondasd = -1;
 229static int aac_cache = 2;       /* WCE=0 to avoid performance problems */
 230static int dacmode = -1;
 231int aac_msi;
 232int aac_commit = -1;
 233int startup_timeout = 180;
 234int aif_timeout = 120;
 235int aac_sync_mode;  /* Only Sync. transfer - disabled */
 236int aac_convert_sgl = 1;        /* convert non-conformable s/g list - enabled */
 237
 238module_param(aac_sync_mode, int, S_IRUGO|S_IWUSR);
 239MODULE_PARM_DESC(aac_sync_mode, "Force sync. transfer mode"
 240        " 0=off, 1=on");
 241module_param(aac_convert_sgl, int, S_IRUGO|S_IWUSR);
 242MODULE_PARM_DESC(aac_convert_sgl, "Convert non-conformable s/g list"
 243        " 0=off, 1=on");
 244module_param(nondasd, int, S_IRUGO|S_IWUSR);
 245MODULE_PARM_DESC(nondasd, "Control scanning of hba for nondasd devices."
 246        " 0=off, 1=on");
 247module_param_named(cache, aac_cache, int, S_IRUGO|S_IWUSR);
 248MODULE_PARM_DESC(cache, "Disable Queue Flush commands:\n"
 249        "\tbit 0 - Disable FUA in WRITE SCSI commands\n"
 250        "\tbit 1 - Disable SYNCHRONIZE_CACHE SCSI command\n"
 251        "\tbit 2 - Disable only if Battery is protecting Cache");
 252module_param(dacmode, int, S_IRUGO|S_IWUSR);
 253MODULE_PARM_DESC(dacmode, "Control whether dma addressing is using 64 bit DAC."
 254        " 0=off, 1=on");
 255module_param_named(commit, aac_commit, int, S_IRUGO|S_IWUSR);
 256MODULE_PARM_DESC(commit, "Control whether a COMMIT_CONFIG is issued to the"
 257        " adapter for foreign arrays.\n"
 258        "This is typically needed in systems that do not have a BIOS."
 259        " 0=off, 1=on");
 260module_param_named(msi, aac_msi, int, S_IRUGO|S_IWUSR);
 261MODULE_PARM_DESC(msi, "IRQ handling."
 262        " 0=PIC(default), 1=MSI, 2=MSI-X)");
 263module_param(startup_timeout, int, S_IRUGO|S_IWUSR);
 264MODULE_PARM_DESC(startup_timeout, "The duration of time in seconds to wait for"
 265        " adapter to have it's kernel up and\n"
 266        "running. This is typically adjusted for large systems that do not"
 267        " have a BIOS.");
 268module_param(aif_timeout, int, S_IRUGO|S_IWUSR);
 269MODULE_PARM_DESC(aif_timeout, "The duration of time in seconds to wait for"
 270        " applications to pick up AIFs before\n"
 271        "deregistering them. This is typically adjusted for heavily burdened"
 272        " systems.");
 273
 274int numacb = -1;
 275module_param(numacb, int, S_IRUGO|S_IWUSR);
 276MODULE_PARM_DESC(numacb, "Request a limit to the number of adapter control"
 277        " blocks (FIB) allocated. Valid values are 512 and down. Default is"
 278        " to use suggestion from Firmware.");
 279
 280int acbsize = -1;
 281module_param(acbsize, int, S_IRUGO|S_IWUSR);
 282MODULE_PARM_DESC(acbsize, "Request a specific adapter control block (FIB)"
 283        " size. Valid values are 512, 2048, 4096 and 8192. Default is to use"
 284        " suggestion from Firmware.");
 285
 286int update_interval = 30 * 60;
 287module_param(update_interval, int, S_IRUGO|S_IWUSR);
 288MODULE_PARM_DESC(update_interval, "Interval in seconds between time sync"
 289        " updates issued to adapter.");
 290
 291int check_interval = 24 * 60 * 60;
 292module_param(check_interval, int, S_IRUGO|S_IWUSR);
 293MODULE_PARM_DESC(check_interval, "Interval in seconds between adapter health"
 294        " checks.");
 295
 296int aac_check_reset = 1;
 297module_param_named(check_reset, aac_check_reset, int, S_IRUGO|S_IWUSR);
 298MODULE_PARM_DESC(check_reset, "If adapter fails health check, reset the"
 299        " adapter. a value of -1 forces the reset to adapters programmed to"
 300        " ignore it.");
 301
 302int expose_physicals = -1;
 303module_param(expose_physicals, int, S_IRUGO|S_IWUSR);
 304MODULE_PARM_DESC(expose_physicals, "Expose physical components of the arrays."
 305        " -1=protect 0=off, 1=on");
 306
 307int aac_reset_devices;
 308module_param_named(reset_devices, aac_reset_devices, int, S_IRUGO|S_IWUSR);
 309MODULE_PARM_DESC(reset_devices, "Force an adapter reset at initialization.");
 310
 311int aac_wwn = 1;
 312module_param_named(wwn, aac_wwn, int, S_IRUGO|S_IWUSR);
 313MODULE_PARM_DESC(wwn, "Select a WWN type for the arrays:\n"
 314        "\t0 - Disable\n"
 315        "\t1 - Array Meta Data Signature (default)\n"
 316        "\t2 - Adapter Serial Number");
 317
 318
 319static inline int aac_valid_context(struct scsi_cmnd *scsicmd,
 320                struct fib *fibptr) {
 321        struct scsi_device *device;
 322
 323        if (unlikely(!scsicmd || !scsicmd->scsi_done)) {
 324                dprintk((KERN_WARNING "aac_valid_context: scsi command corrupt\n"));
 325                aac_fib_complete(fibptr);
 326                return 0;
 327        }
 328        scsicmd->SCp.phase = AAC_OWNER_MIDLEVEL;
 329        device = scsicmd->device;
 330        if (unlikely(!device || !scsi_device_online(device))) {
 331                dprintk((KERN_WARNING "aac_valid_context: scsi device corrupt\n"));
 332                aac_fib_complete(fibptr);
 333                return 0;
 334        }
 335        return 1;
 336}
 337
 338/**
 339 *      aac_get_config_status   -       check the adapter configuration
 340 *      @common: adapter to query
 341 *
 342 *      Query config status, and commit the configuration if needed.
 343 */
 344int aac_get_config_status(struct aac_dev *dev, int commit_flag)
 345{
 346        int status = 0;
 347        struct fib * fibptr;
 348
 349        if (!(fibptr = aac_fib_alloc(dev)))
 350                return -ENOMEM;
 351
 352        aac_fib_init(fibptr);
 353        {
 354                struct aac_get_config_status *dinfo;
 355                dinfo = (struct aac_get_config_status *) fib_data(fibptr);
 356
 357                dinfo->command = cpu_to_le32(VM_ContainerConfig);
 358                dinfo->type = cpu_to_le32(CT_GET_CONFIG_STATUS);
 359                dinfo->count = cpu_to_le32(sizeof(((struct aac_get_config_status_resp *)NULL)->data));
 360        }
 361
 362        status = aac_fib_send(ContainerCommand,
 363                            fibptr,
 364                            sizeof (struct aac_get_config_status),
 365                            FsaNormal,
 366                            1, 1,
 367                            NULL, NULL);
 368        if (status < 0) {
 369                printk(KERN_WARNING "aac_get_config_status: SendFIB failed.\n");
 370        } else {
 371                struct aac_get_config_status_resp *reply
 372                  = (struct aac_get_config_status_resp *) fib_data(fibptr);
 373                dprintk((KERN_WARNING
 374                  "aac_get_config_status: response=%d status=%d action=%d\n",
 375                  le32_to_cpu(reply->response),
 376                  le32_to_cpu(reply->status),
 377                  le32_to_cpu(reply->data.action)));
 378                if ((le32_to_cpu(reply->response) != ST_OK) ||
 379                     (le32_to_cpu(reply->status) != CT_OK) ||
 380                     (le32_to_cpu(reply->data.action) > CFACT_PAUSE)) {
 381                        printk(KERN_WARNING "aac_get_config_status: Will not issue the Commit Configuration\n");
 382                        status = -EINVAL;
 383                }
 384        }
 385        /* Do not set XferState to zero unless receives a response from F/W */
 386        if (status >= 0)
 387                aac_fib_complete(fibptr);
 388
 389        /* Send a CT_COMMIT_CONFIG to enable discovery of devices */
 390        if (status >= 0) {
 391                if ((aac_commit == 1) || commit_flag) {
 392                        struct aac_commit_config * dinfo;
 393                        aac_fib_init(fibptr);
 394                        dinfo = (struct aac_commit_config *) fib_data(fibptr);
 395
 396                        dinfo->command = cpu_to_le32(VM_ContainerConfig);
 397                        dinfo->type = cpu_to_le32(CT_COMMIT_CONFIG);
 398
 399                        status = aac_fib_send(ContainerCommand,
 400                                    fibptr,
 401                                    sizeof (struct aac_commit_config),
 402                                    FsaNormal,
 403                                    1, 1,
 404                                    NULL, NULL);
 405                        /* Do not set XferState to zero unless
 406                         * receives a response from F/W */
 407                        if (status >= 0)
 408                                aac_fib_complete(fibptr);
 409                } else if (aac_commit == 0) {
 410                        printk(KERN_WARNING
 411                          "aac_get_config_status: Foreign device configurations are being ignored\n");
 412                }
 413        }
 414        /* FIB should be freed only after getting the response from the F/W */
 415        if (status != -ERESTARTSYS)
 416                aac_fib_free(fibptr);
 417        return status;
 418}
 419
 420static void aac_expose_phy_device(struct scsi_cmnd *scsicmd)
 421{
 422        char inq_data;
 423        scsi_sg_copy_to_buffer(scsicmd,  &inq_data, sizeof(inq_data));
 424        if ((inq_data & 0x20) && (inq_data & 0x1f) == TYPE_DISK) {
 425                inq_data &= 0xdf;
 426                scsi_sg_copy_from_buffer(scsicmd, &inq_data, sizeof(inq_data));
 427        }
 428}
 429
 430/**
 431 *      aac_get_containers      -       list containers
 432 *      @common: adapter to probe
 433 *
 434 *      Make a list of all containers on this controller
 435 */
 436int aac_get_containers(struct aac_dev *dev)
 437{
 438        struct fsa_dev_info *fsa_dev_ptr;
 439        u32 index;
 440        int status = 0;
 441        struct fib * fibptr;
 442        struct aac_get_container_count *dinfo;
 443        struct aac_get_container_count_resp *dresp;
 444        int maximum_num_containers = MAXIMUM_NUM_CONTAINERS;
 445
 446        if (!(fibptr = aac_fib_alloc(dev)))
 447                return -ENOMEM;
 448
 449        aac_fib_init(fibptr);
 450        dinfo = (struct aac_get_container_count *) fib_data(fibptr);
 451        dinfo->command = cpu_to_le32(VM_ContainerConfig);
 452        dinfo->type = cpu_to_le32(CT_GET_CONTAINER_COUNT);
 453
 454        status = aac_fib_send(ContainerCommand,
 455                    fibptr,
 456                    sizeof (struct aac_get_container_count),
 457                    FsaNormal,
 458                    1, 1,
 459                    NULL, NULL);
 460        if (status >= 0) {
 461                dresp = (struct aac_get_container_count_resp *)fib_data(fibptr);
 462                maximum_num_containers = le32_to_cpu(dresp->ContainerSwitchEntries);
 463                if (fibptr->dev->supplement_adapter_info.SupportedOptions2 &
 464                    AAC_OPTION_SUPPORTED_240_VOLUMES) {
 465                        maximum_num_containers =
 466                                le32_to_cpu(dresp->MaxSimpleVolumes);
 467                }
 468                aac_fib_complete(fibptr);
 469        }
 470        /* FIB should be freed only after getting the response from the F/W */
 471        if (status != -ERESTARTSYS)
 472                aac_fib_free(fibptr);
 473
 474        if (maximum_num_containers < MAXIMUM_NUM_CONTAINERS)
 475                maximum_num_containers = MAXIMUM_NUM_CONTAINERS;
 476        fsa_dev_ptr = kzalloc(sizeof(*fsa_dev_ptr) * maximum_num_containers,
 477                        GFP_KERNEL);
 478        if (!fsa_dev_ptr)
 479                return -ENOMEM;
 480
 481        dev->fsa_dev = fsa_dev_ptr;
 482        dev->maximum_num_containers = maximum_num_containers;
 483
 484        for (index = 0; index < dev->maximum_num_containers; ) {
 485                fsa_dev_ptr[index].devname[0] = '\0';
 486
 487                status = aac_probe_container(dev, index);
 488
 489                if (status < 0) {
 490                        printk(KERN_WARNING "aac_get_containers: SendFIB failed.\n");
 491                        break;
 492                }
 493
 494                /*
 495                 *      If there are no more containers, then stop asking.
 496                 */
 497                if (++index >= status)
 498                        break;
 499        }
 500        return status;
 501}
 502
 503static void get_container_name_callback(void *context, struct fib * fibptr)
 504{
 505        struct aac_get_name_resp * get_name_reply;
 506        struct scsi_cmnd * scsicmd;
 507
 508        scsicmd = (struct scsi_cmnd *) context;
 509
 510        if (!aac_valid_context(scsicmd, fibptr))
 511                return;
 512
 513        dprintk((KERN_DEBUG "get_container_name_callback[cpu %d]: t = %ld.\n", smp_processor_id(), jiffies));
 514        BUG_ON(fibptr == NULL);
 515
 516        get_name_reply = (struct aac_get_name_resp *) fib_data(fibptr);
 517        /* Failure is irrelevant, using default value instead */
 518        if ((le32_to_cpu(get_name_reply->status) == CT_OK)
 519         && (get_name_reply->data[0] != '\0')) {
 520                char *sp = get_name_reply->data;
 521                sp[sizeof(((struct aac_get_name_resp *)NULL)->data)] = '\0';
 522                while (*sp == ' ')
 523                        ++sp;
 524                if (*sp) {
 525                        struct inquiry_data inq;
 526                        char d[sizeof(((struct inquiry_data *)NULL)->inqd_pid)];
 527                        int count = sizeof(d);
 528                        char *dp = d;
 529                        do {
 530                                *dp++ = (*sp) ? *sp++ : ' ';
 531                        } while (--count > 0);
 532
 533                        scsi_sg_copy_to_buffer(scsicmd, &inq, sizeof(inq));
 534                        memcpy(inq.inqd_pid, d, sizeof(d));
 535                        scsi_sg_copy_from_buffer(scsicmd, &inq, sizeof(inq));
 536                }
 537        }
 538
 539        scsicmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8 | SAM_STAT_GOOD;
 540
 541        aac_fib_complete(fibptr);
 542        scsicmd->scsi_done(scsicmd);
 543}
 544
 545/**
 546 *      aac_get_container_name  -       get container name, none blocking.
 547 */
 548static int aac_get_container_name(struct scsi_cmnd * scsicmd)
 549{
 550        int status;
 551        struct aac_get_name *dinfo;
 552        struct fib * cmd_fibcontext;
 553        struct aac_dev * dev;
 554
 555        dev = (struct aac_dev *)scsicmd->device->host->hostdata;
 556
 557        cmd_fibcontext = aac_fib_alloc_tag(dev, scsicmd);
 558        if (!cmd_fibcontext)
 559                return -ENOMEM;
 560
 561        aac_fib_init(cmd_fibcontext);
 562        dinfo = (struct aac_get_name *) fib_data(cmd_fibcontext);
 563
 564        dinfo->command = cpu_to_le32(VM_ContainerConfig);
 565        dinfo->type = cpu_to_le32(CT_READ_NAME);
 566        dinfo->cid = cpu_to_le32(scmd_id(scsicmd));
 567        dinfo->count = cpu_to_le32(sizeof(((struct aac_get_name_resp *)NULL)->data));
 568
 569        status = aac_fib_send(ContainerCommand,
 570                  cmd_fibcontext,
 571                  sizeof(struct aac_get_name_resp),
 572                  FsaNormal,
 573                  0, 1,
 574                  (fib_callback)get_container_name_callback,
 575                  (void *) scsicmd);
 576
 577        /*
 578         *      Check that the command queued to the controller
 579         */
 580        if (status == -EINPROGRESS) {
 581                scsicmd->SCp.phase = AAC_OWNER_FIRMWARE;
 582                return 0;
 583        }
 584
 585        printk(KERN_WARNING "aac_get_container_name: aac_fib_send failed with status: %d.\n", status);
 586        aac_fib_complete(cmd_fibcontext);
 587        return -1;
 588}
 589
 590static int aac_probe_container_callback2(struct scsi_cmnd * scsicmd)
 591{
 592        struct fsa_dev_info *fsa_dev_ptr = ((struct aac_dev *)(scsicmd->device->host->hostdata))->fsa_dev;
 593
 594        if ((fsa_dev_ptr[scmd_id(scsicmd)].valid & 1))
 595                return aac_scsi_cmd(scsicmd);
 596
 597        scsicmd->result = DID_NO_CONNECT << 16;
 598        scsicmd->scsi_done(scsicmd);
 599        return 0;
 600}
 601
 602static void _aac_probe_container2(void * context, struct fib * fibptr)
 603{
 604        struct fsa_dev_info *fsa_dev_ptr;
 605        int (*callback)(struct scsi_cmnd *);
 606        struct scsi_cmnd * scsicmd = (struct scsi_cmnd *)context;
 607
 608
 609        if (!aac_valid_context(scsicmd, fibptr))
 610                return;
 611
 612        scsicmd->SCp.Status = 0;
 613        fsa_dev_ptr = fibptr->dev->fsa_dev;
 614        if (fsa_dev_ptr) {
 615                struct aac_mount * dresp = (struct aac_mount *) fib_data(fibptr);
 616                fsa_dev_ptr += scmd_id(scsicmd);
 617
 618                if ((le32_to_cpu(dresp->status) == ST_OK) &&
 619                    (le32_to_cpu(dresp->mnt[0].vol) != CT_NONE) &&
 620                    (le32_to_cpu(dresp->mnt[0].state) != FSCS_HIDDEN)) {
 621                        if (!(fibptr->dev->supplement_adapter_info.SupportedOptions2 &
 622                            AAC_OPTION_VARIABLE_BLOCK_SIZE)) {
 623                                dresp->mnt[0].fileinfo.bdevinfo.block_size = 0x200;
 624                                fsa_dev_ptr->block_size = 0x200;
 625                        } else {
 626                                fsa_dev_ptr->block_size =
 627                                        le32_to_cpu(dresp->mnt[0].fileinfo.bdevinfo.block_size);
 628                        }
 629                        fsa_dev_ptr->valid = 1;
 630                        /* sense_key holds the current state of the spin-up */
 631                        if (dresp->mnt[0].state & cpu_to_le32(FSCS_NOT_READY))
 632                                fsa_dev_ptr->sense_data.sense_key = NOT_READY;
 633                        else if (fsa_dev_ptr->sense_data.sense_key == NOT_READY)
 634                                fsa_dev_ptr->sense_data.sense_key = NO_SENSE;
 635                        fsa_dev_ptr->type = le32_to_cpu(dresp->mnt[0].vol);
 636                        fsa_dev_ptr->size
 637                          = ((u64)le32_to_cpu(dresp->mnt[0].capacity)) +
 638                            (((u64)le32_to_cpu(dresp->mnt[0].capacityhigh)) << 32);
 639                        fsa_dev_ptr->ro = ((le32_to_cpu(dresp->mnt[0].state) & FSCS_READONLY) != 0);
 640                }
 641                if ((fsa_dev_ptr->valid & 1) == 0)
 642                        fsa_dev_ptr->valid = 0;
 643                scsicmd->SCp.Status = le32_to_cpu(dresp->count);
 644        }
 645        aac_fib_complete(fibptr);
 646        aac_fib_free(fibptr);
 647        callback = (int (*)(struct scsi_cmnd *))(scsicmd->SCp.ptr);
 648        scsicmd->SCp.ptr = NULL;
 649        (*callback)(scsicmd);
 650        return;
 651}
 652
 653static void _aac_probe_container1(void * context, struct fib * fibptr)
 654{
 655        struct scsi_cmnd * scsicmd;
 656        struct aac_mount * dresp;
 657        struct aac_query_mount *dinfo;
 658        int status;
 659
 660        dresp = (struct aac_mount *) fib_data(fibptr);
 661        if (!(fibptr->dev->supplement_adapter_info.SupportedOptions2 &
 662            AAC_OPTION_VARIABLE_BLOCK_SIZE))
 663                dresp->mnt[0].capacityhigh = 0;
 664        if ((le32_to_cpu(dresp->status) != ST_OK) ||
 665            (le32_to_cpu(dresp->mnt[0].vol) != CT_NONE)) {
 666                _aac_probe_container2(context, fibptr);
 667                return;
 668        }
 669        scsicmd = (struct scsi_cmnd *) context;
 670
 671        if (!aac_valid_context(scsicmd, fibptr))
 672                return;
 673
 674        aac_fib_init(fibptr);
 675
 676        dinfo = (struct aac_query_mount *)fib_data(fibptr);
 677
 678        if (fibptr->dev->supplement_adapter_info.SupportedOptions2 &
 679            AAC_OPTION_VARIABLE_BLOCK_SIZE)
 680                dinfo->command = cpu_to_le32(VM_NameServeAllBlk);
 681        else
 682                dinfo->command = cpu_to_le32(VM_NameServe64);
 683
 684        dinfo->count = cpu_to_le32(scmd_id(scsicmd));
 685        dinfo->type = cpu_to_le32(FT_FILESYS);
 686
 687        status = aac_fib_send(ContainerCommand,
 688                          fibptr,
 689                          sizeof(struct aac_query_mount),
 690                          FsaNormal,
 691                          0, 1,
 692                          _aac_probe_container2,
 693                          (void *) scsicmd);
 694        /*
 695         *      Check that the command queued to the controller
 696         */
 697        if (status == -EINPROGRESS)
 698                scsicmd->SCp.phase = AAC_OWNER_FIRMWARE;
 699        else if (status < 0) {
 700                /* Inherit results from VM_NameServe, if any */
 701                dresp->status = cpu_to_le32(ST_OK);
 702                _aac_probe_container2(context, fibptr);
 703        }
 704}
 705
 706static int _aac_probe_container(struct scsi_cmnd * scsicmd, int (*callback)(struct scsi_cmnd *))
 707{
 708        struct fib * fibptr;
 709        int status = -ENOMEM;
 710
 711        if ((fibptr = aac_fib_alloc((struct aac_dev *)scsicmd->device->host->hostdata))) {
 712                struct aac_query_mount *dinfo;
 713
 714                aac_fib_init(fibptr);
 715
 716                dinfo = (struct aac_query_mount *)fib_data(fibptr);
 717
 718                if (fibptr->dev->supplement_adapter_info.SupportedOptions2 &
 719                    AAC_OPTION_VARIABLE_BLOCK_SIZE)
 720                        dinfo->command = cpu_to_le32(VM_NameServeAllBlk);
 721                else
 722                        dinfo->command = cpu_to_le32(VM_NameServe);
 723
 724                dinfo->count = cpu_to_le32(scmd_id(scsicmd));
 725                dinfo->type = cpu_to_le32(FT_FILESYS);
 726                scsicmd->SCp.ptr = (char *)callback;
 727
 728                status = aac_fib_send(ContainerCommand,
 729                          fibptr,
 730                          sizeof(struct aac_query_mount),
 731                          FsaNormal,
 732                          0, 1,
 733                          _aac_probe_container1,
 734                          (void *) scsicmd);
 735                /*
 736                 *      Check that the command queued to the controller
 737                 */
 738                if (status == -EINPROGRESS) {
 739                        scsicmd->SCp.phase = AAC_OWNER_FIRMWARE;
 740                        return 0;
 741                }
 742                if (status < 0) {
 743                        scsicmd->SCp.ptr = NULL;
 744                        aac_fib_complete(fibptr);
 745                        aac_fib_free(fibptr);
 746                }
 747        }
 748        if (status < 0) {
 749                struct fsa_dev_info *fsa_dev_ptr = ((struct aac_dev *)(scsicmd->device->host->hostdata))->fsa_dev;
 750                if (fsa_dev_ptr) {
 751                        fsa_dev_ptr += scmd_id(scsicmd);
 752                        if ((fsa_dev_ptr->valid & 1) == 0) {
 753                                fsa_dev_ptr->valid = 0;
 754                                return (*callback)(scsicmd);
 755                        }
 756                }
 757        }
 758        return status;
 759}
 760
 761/**
 762 *      aac_probe_container             -       query a logical volume
 763 *      @dev: device to query
 764 *      @cid: container identifier
 765 *
 766 *      Queries the controller about the given volume. The volume information
 767 *      is updated in the struct fsa_dev_info structure rather than returned.
 768 */
 769static int aac_probe_container_callback1(struct scsi_cmnd * scsicmd)
 770{
 771        scsicmd->device = NULL;
 772        return 0;
 773}
 774
 775int aac_probe_container(struct aac_dev *dev, int cid)
 776{
 777        struct scsi_cmnd *scsicmd = kmalloc(sizeof(*scsicmd), GFP_KERNEL);
 778        struct scsi_device *scsidev = kmalloc(sizeof(*scsidev), GFP_KERNEL);
 779        int status;
 780
 781        if (!scsicmd || !scsidev) {
 782                kfree(scsicmd);
 783                kfree(scsidev);
 784                return -ENOMEM;
 785        }
 786        scsicmd->list.next = NULL;
 787        scsicmd->scsi_done = (void (*)(struct scsi_cmnd*))aac_probe_container_callback1;
 788
 789        scsicmd->device = scsidev;
 790        scsidev->sdev_state = 0;
 791        scsidev->id = cid;
 792        scsidev->host = dev->scsi_host_ptr;
 793
 794        if (_aac_probe_container(scsicmd, aac_probe_container_callback1) == 0)
 795                while (scsicmd->device == scsidev)
 796                        schedule();
 797        kfree(scsidev);
 798        status = scsicmd->SCp.Status;
 799        kfree(scsicmd);
 800        return status;
 801}
 802
 803/* Local Structure to set SCSI inquiry data strings */
 804struct scsi_inq {
 805        char vid[8];         /* Vendor ID */
 806        char pid[16];        /* Product ID */
 807        char prl[4];         /* Product Revision Level */
 808};
 809
 810/**
 811 *      InqStrCopy      -       string merge
 812 *      @a:     string to copy from
 813 *      @b:     string to copy to
 814 *
 815 *      Copy a String from one location to another
 816 *      without copying \0
 817 */
 818
 819static void inqstrcpy(char *a, char *b)
 820{
 821
 822        while (*a != (char)0)
 823                *b++ = *a++;
 824}
 825
 826static char *container_types[] = {
 827        "None",
 828        "Volume",
 829        "Mirror",
 830        "Stripe",
 831        "RAID5",
 832        "SSRW",
 833        "SSRO",
 834        "Morph",
 835        "Legacy",
 836        "RAID4",
 837        "RAID10",
 838        "RAID00",
 839        "V-MIRRORS",
 840        "PSEUDO R4",
 841        "RAID50",
 842        "RAID5D",
 843        "RAID5D0",
 844        "RAID1E",
 845        "RAID6",
 846        "RAID60",
 847        "Unknown"
 848};
 849
 850char * get_container_type(unsigned tindex)
 851{
 852        if (tindex >= ARRAY_SIZE(container_types))
 853                tindex = ARRAY_SIZE(container_types) - 1;
 854        return container_types[tindex];
 855}
 856
 857/* Function: setinqstr
 858 *
 859 * Arguments: [1] pointer to void [1] int
 860 *
 861 * Purpose: Sets SCSI inquiry data strings for vendor, product
 862 * and revision level. Allows strings to be set in platform dependent
 863 * files instead of in OS dependent driver source.
 864 */
 865
 866static void setinqstr(struct aac_dev *dev, void *data, int tindex)
 867{
 868        struct scsi_inq *str;
 869
 870        str = (struct scsi_inq *)(data); /* cast data to scsi inq block */
 871        memset(str, ' ', sizeof(*str));
 872
 873        if (dev->supplement_adapter_info.AdapterTypeText[0]) {
 874                char * cp = dev->supplement_adapter_info.AdapterTypeText;
 875                int c;
 876                if ((cp[0] == 'A') && (cp[1] == 'O') && (cp[2] == 'C'))
 877                        inqstrcpy("SMC", str->vid);
 878                else {
 879                        c = sizeof(str->vid);
 880                        while (*cp && *cp != ' ' && --c)
 881                                ++cp;
 882                        c = *cp;
 883                        *cp = '\0';
 884                        inqstrcpy (dev->supplement_adapter_info.AdapterTypeText,
 885                                   str->vid);
 886                        *cp = c;
 887                        while (*cp && *cp != ' ')
 888                                ++cp;
 889                }
 890                while (*cp == ' ')
 891                        ++cp;
 892                /* last six chars reserved for vol type */
 893                c = 0;
 894                if (strlen(cp) > sizeof(str->pid)) {
 895                        c = cp[sizeof(str->pid)];
 896                        cp[sizeof(str->pid)] = '\0';
 897                }
 898                inqstrcpy (cp, str->pid);
 899                if (c)
 900                        cp[sizeof(str->pid)] = c;
 901        } else {
 902                struct aac_driver_ident *mp = aac_get_driver_ident(dev->cardtype);
 903
 904                inqstrcpy (mp->vname, str->vid);
 905                /* last six chars reserved for vol type */
 906                inqstrcpy (mp->model, str->pid);
 907        }
 908
 909        if (tindex < ARRAY_SIZE(container_types)){
 910                char *findit = str->pid;
 911
 912                for ( ; *findit != ' '; findit++); /* walk till we find a space */
 913                /* RAID is superfluous in the context of a RAID device */
 914                if (memcmp(findit-4, "RAID", 4) == 0)
 915                        *(findit -= 4) = ' ';
 916                if (((findit - str->pid) + strlen(container_types[tindex]))
 917                 < (sizeof(str->pid) + sizeof(str->prl)))
 918                        inqstrcpy (container_types[tindex], findit + 1);
 919        }
 920        inqstrcpy ("V1.0", str->prl);
 921}
 922
 923static void get_container_serial_callback(void *context, struct fib * fibptr)
 924{
 925        struct aac_get_serial_resp * get_serial_reply;
 926        struct scsi_cmnd * scsicmd;
 927
 928        BUG_ON(fibptr == NULL);
 929
 930        scsicmd = (struct scsi_cmnd *) context;
 931        if (!aac_valid_context(scsicmd, fibptr))
 932                return;
 933
 934        get_serial_reply = (struct aac_get_serial_resp *) fib_data(fibptr);
 935        /* Failure is irrelevant, using default value instead */
 936        if (le32_to_cpu(get_serial_reply->status) == CT_OK) {
 937                /*Check to see if it's for VPD 0x83 or 0x80 */
 938                if (scsicmd->cmnd[2] == 0x83) {
 939                        /* vpd page 0x83 - Device Identification Page */
 940                        int i;
 941                        TVPD_Page83 VPDPage83Data;
 942
 943                        memset(((u8 *)&VPDPage83Data), 0,
 944                               sizeof(VPDPage83Data));
 945
 946                        /* DIRECT_ACCESS_DEVIC */
 947                        VPDPage83Data.DeviceType = 0;
 948                        /* DEVICE_CONNECTED */
 949                        VPDPage83Data.DeviceTypeQualifier = 0;
 950                        /* VPD_DEVICE_IDENTIFIERS */
 951                        VPDPage83Data.PageCode = 0x83;
 952                        VPDPage83Data.Reserved = 0;
 953                        VPDPage83Data.PageLength =
 954                                sizeof(VPDPage83Data.IdDescriptorType1) +
 955                                sizeof(VPDPage83Data.IdDescriptorType2);
 956
 957                        /* T10 Vendor Identifier Field Format */
 958                        /* VpdCodeSetAscii */
 959                        VPDPage83Data.IdDescriptorType1.CodeSet = 2;
 960                        /* VpdIdentifierTypeVendorId */
 961                        VPDPage83Data.IdDescriptorType1.IdentifierType = 1;
 962                        VPDPage83Data.IdDescriptorType1.IdentifierLength =
 963                                sizeof(VPDPage83Data.IdDescriptorType1) - 4;
 964
 965                        /* "ADAPTEC " for adaptec */
 966                        memcpy(VPDPage83Data.IdDescriptorType1.VendId,
 967                                "ADAPTEC ",
 968                                sizeof(VPDPage83Data.IdDescriptorType1.VendId));
 969                        memcpy(VPDPage83Data.IdDescriptorType1.ProductId,
 970                                "ARRAY           ",
 971                                sizeof(
 972                                VPDPage83Data.IdDescriptorType1.ProductId));
 973
 974                        /* Convert to ascii based serial number.
 975                         * The LSB is the the end.
 976                         */
 977                        for (i = 0; i < 8; i++) {
 978                                u8 temp =
 979                                        (u8)((get_serial_reply->uid >> ((7 - i) * 4)) & 0xF);
 980                                if (temp  > 0x9) {
 981                                        VPDPage83Data.IdDescriptorType1.SerialNumber[i] =
 982                                                        'A' + (temp - 0xA);
 983                                } else {
 984                                        VPDPage83Data.IdDescriptorType1.SerialNumber[i] =
 985                                                        '0' + temp;
 986                                }
 987                        }
 988
 989                        /* VpdCodeSetBinary */
 990                        VPDPage83Data.IdDescriptorType2.CodeSet = 1;
 991                        /* VpdIdentifierTypeEUI64 */
 992                        VPDPage83Data.IdDescriptorType2.IdentifierType = 2;
 993                        VPDPage83Data.IdDescriptorType2.IdentifierLength =
 994                                sizeof(VPDPage83Data.IdDescriptorType2) - 4;
 995
 996                        VPDPage83Data.IdDescriptorType2.EU64Id.VendId[0] = 0xD0;
 997                        VPDPage83Data.IdDescriptorType2.EU64Id.VendId[1] = 0;
 998                        VPDPage83Data.IdDescriptorType2.EU64Id.VendId[2] = 0;
 999
1000                        VPDPage83Data.IdDescriptorType2.EU64Id.Serial =
1001                                                        get_serial_reply->uid;
1002                        VPDPage83Data.IdDescriptorType2.EU64Id.Reserved = 0;
1003
1004                        /* Move the inquiry data to the response buffer. */
1005                        scsi_sg_copy_from_buffer(scsicmd, &VPDPage83Data,
1006                                                 sizeof(VPDPage83Data));
1007                } else {
1008                        /* It must be for VPD 0x80 */
1009                        char sp[13];
1010                        /* EVPD bit set */
1011                        sp[0] = INQD_PDT_DA;
1012                        sp[1] = scsicmd->cmnd[2];
1013                        sp[2] = 0;
1014                        sp[3] = snprintf(sp+4, sizeof(sp)-4, "%08X",
1015                                le32_to_cpu(get_serial_reply->uid));
1016                        scsi_sg_copy_from_buffer(scsicmd, sp,
1017                                                 sizeof(sp));
1018                }
1019        }
1020
1021        scsicmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8 | SAM_STAT_GOOD;
1022
1023        aac_fib_complete(fibptr);
1024        scsicmd->scsi_done(scsicmd);
1025}
1026
1027/**
1028 *      aac_get_container_serial - get container serial, none blocking.
1029 */
1030static int aac_get_container_serial(struct scsi_cmnd * scsicmd)
1031{
1032        int status;
1033        struct aac_get_serial *dinfo;
1034        struct fib * cmd_fibcontext;
1035        struct aac_dev * dev;
1036
1037        dev = (struct aac_dev *)scsicmd->device->host->hostdata;
1038
1039        cmd_fibcontext = aac_fib_alloc_tag(dev, scsicmd);
1040        if (!cmd_fibcontext)
1041                return -ENOMEM;
1042
1043        aac_fib_init(cmd_fibcontext);
1044        dinfo = (struct aac_get_serial *) fib_data(cmd_fibcontext);
1045
1046        dinfo->command = cpu_to_le32(VM_ContainerConfig);
1047        dinfo->type = cpu_to_le32(CT_CID_TO_32BITS_UID);
1048        dinfo->cid = cpu_to_le32(scmd_id(scsicmd));
1049
1050        status = aac_fib_send(ContainerCommand,
1051                  cmd_fibcontext,
1052                  sizeof(struct aac_get_serial_resp),
1053                  FsaNormal,
1054                  0, 1,
1055                  (fib_callback) get_container_serial_callback,
1056                  (void *) scsicmd);
1057
1058        /*
1059         *      Check that the command queued to the controller
1060         */
1061        if (status == -EINPROGRESS) {
1062                scsicmd->SCp.phase = AAC_OWNER_FIRMWARE;
1063                return 0;
1064        }
1065
1066        printk(KERN_WARNING "aac_get_container_serial: aac_fib_send failed with status: %d.\n", status);
1067        aac_fib_complete(cmd_fibcontext);
1068        return -1;
1069}
1070
1071/* Function: setinqserial
1072 *
1073 * Arguments: [1] pointer to void [1] int
1074 *
1075 * Purpose: Sets SCSI Unit Serial number.
1076 *          This is a fake. We should read a proper
1077 *          serial number from the container. <SuSE>But
1078 *          without docs it's quite hard to do it :-)
1079 *          So this will have to do in the meantime.</SuSE>
1080 */
1081
1082static int setinqserial(struct aac_dev *dev, void *data, int cid)
1083{
1084        /*
1085         *      This breaks array migration.
1086         */
1087        return snprintf((char *)(data), sizeof(struct scsi_inq) - 4, "%08X%02X",
1088                        le32_to_cpu(dev->adapter_info.serial[0]), cid);
1089}
1090
1091static inline void set_sense(struct sense_data *sense_data, u8 sense_key,
1092        u8 sense_code, u8 a_sense_code, u8 bit_pointer, u16 field_pointer)
1093{
1094        u8 *sense_buf = (u8 *)sense_data;
1095        /* Sense data valid, err code 70h */
1096        sense_buf[0] = 0x70; /* No info field */
1097        sense_buf[1] = 0;       /* Segment number, always zero */
1098
1099        sense_buf[2] = sense_key;       /* Sense key */
1100
1101        sense_buf[12] = sense_code;     /* Additional sense code */
1102        sense_buf[13] = a_sense_code;   /* Additional sense code qualifier */
1103
1104        if (sense_key == ILLEGAL_REQUEST) {
1105                sense_buf[7] = 10;      /* Additional sense length */
1106
1107                sense_buf[15] = bit_pointer;
1108                /* Illegal parameter is in the parameter block */
1109                if (sense_code == SENCODE_INVALID_CDB_FIELD)
1110                        sense_buf[15] |= 0xc0;/* Std sense key specific field */
1111                /* Illegal parameter is in the CDB block */
1112                sense_buf[16] = field_pointer >> 8;     /* MSB */
1113                sense_buf[17] = field_pointer;          /* LSB */
1114        } else
1115                sense_buf[7] = 6;       /* Additional sense length */
1116}
1117
1118static int aac_bounds_32(struct aac_dev * dev, struct scsi_cmnd * cmd, u64 lba)
1119{
1120        if (lba & 0xffffffff00000000LL) {
1121                int cid = scmd_id(cmd);
1122                dprintk((KERN_DEBUG "aacraid: Illegal lba\n"));
1123                cmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8 |
1124                        SAM_STAT_CHECK_CONDITION;
1125                set_sense(&dev->fsa_dev[cid].sense_data,
1126                  HARDWARE_ERROR, SENCODE_INTERNAL_TARGET_FAILURE,
1127                  ASENCODE_INTERNAL_TARGET_FAILURE, 0, 0);
1128                memcpy(cmd->sense_buffer, &dev->fsa_dev[cid].sense_data,
1129                       min_t(size_t, sizeof(dev->fsa_dev[cid].sense_data),
1130                             SCSI_SENSE_BUFFERSIZE));
1131                cmd->scsi_done(cmd);
1132                return 1;
1133        }
1134        return 0;
1135}
1136
1137static int aac_bounds_64(struct aac_dev * dev, struct scsi_cmnd * cmd, u64 lba)
1138{
1139        return 0;
1140}
1141
1142static void io_callback(void *context, struct fib * fibptr);
1143
1144static int aac_read_raw_io(struct fib * fib, struct scsi_cmnd * cmd, u64 lba, u32 count)
1145{
1146        struct aac_dev *dev = fib->dev;
1147        u16 fibsize, command;
1148        long ret;
1149
1150        aac_fib_init(fib);
1151        if (dev->comm_interface == AAC_COMM_MESSAGE_TYPE2 && !dev->sync_mode) {
1152                struct aac_raw_io2 *readcmd2;
1153                readcmd2 = (struct aac_raw_io2 *) fib_data(fib);
1154                memset(readcmd2, 0, sizeof(struct aac_raw_io2));
1155                readcmd2->blockLow = cpu_to_le32((u32)(lba&0xffffffff));
1156                readcmd2->blockHigh = cpu_to_le32((u32)((lba&0xffffffff00000000LL)>>32));
1157                readcmd2->byteCount = cpu_to_le32(count *
1158                        dev->fsa_dev[scmd_id(cmd)].block_size);
1159                readcmd2->cid = cpu_to_le16(scmd_id(cmd));
1160                readcmd2->flags = cpu_to_le16(RIO2_IO_TYPE_READ);
1161                ret = aac_build_sgraw2(cmd, readcmd2,
1162                                dev->scsi_host_ptr->sg_tablesize);
1163                if (ret < 0)
1164                        return ret;
1165                command = ContainerRawIo2;
1166                fibsize = sizeof(struct aac_raw_io2) +
1167                        ((le32_to_cpu(readcmd2->sgeCnt)-1) * sizeof(struct sge_ieee1212));
1168        } else {
1169                struct aac_raw_io *readcmd;
1170                readcmd = (struct aac_raw_io *) fib_data(fib);
1171                readcmd->block[0] = cpu_to_le32((u32)(lba&0xffffffff));
1172                readcmd->block[1] = cpu_to_le32((u32)((lba&0xffffffff00000000LL)>>32));
1173                readcmd->count = cpu_to_le32(count *
1174                        dev->fsa_dev[scmd_id(cmd)].block_size);
1175                readcmd->cid = cpu_to_le16(scmd_id(cmd));
1176                readcmd->flags = cpu_to_le16(RIO_TYPE_READ);
1177                readcmd->bpTotal = 0;
1178                readcmd->bpComplete = 0;
1179                ret = aac_build_sgraw(cmd, &readcmd->sg);
1180                if (ret < 0)
1181                        return ret;
1182                command = ContainerRawIo;
1183                fibsize = sizeof(struct aac_raw_io) +
1184                        ((le32_to_cpu(readcmd->sg.count)-1) * sizeof(struct sgentryraw));
1185        }
1186
1187        BUG_ON(fibsize > (fib->dev->max_fib_size - sizeof(struct aac_fibhdr)));
1188        /*
1189         *      Now send the Fib to the adapter
1190         */
1191        return aac_fib_send(command,
1192                          fib,
1193                          fibsize,
1194                          FsaNormal,
1195                          0, 1,
1196                          (fib_callback) io_callback,
1197                          (void *) cmd);
1198}
1199
1200static int aac_read_block64(struct fib * fib, struct scsi_cmnd * cmd, u64 lba, u32 count)
1201{
1202        u16 fibsize;
1203        struct aac_read64 *readcmd;
1204        long ret;
1205
1206        aac_fib_init(fib);
1207        readcmd = (struct aac_read64 *) fib_data(fib);
1208        readcmd->command = cpu_to_le32(VM_CtHostRead64);
1209        readcmd->cid = cpu_to_le16(scmd_id(cmd));
1210        readcmd->sector_count = cpu_to_le16(count);
1211        readcmd->block = cpu_to_le32((u32)(lba&0xffffffff));
1212        readcmd->pad   = 0;
1213        readcmd->flags = 0;
1214
1215        ret = aac_build_sg64(cmd, &readcmd->sg);
1216        if (ret < 0)
1217                return ret;
1218        fibsize = sizeof(struct aac_read64) +
1219                ((le32_to_cpu(readcmd->sg.count) - 1) *
1220                 sizeof (struct sgentry64));
1221        BUG_ON (fibsize > (fib->dev->max_fib_size -
1222                                sizeof(struct aac_fibhdr)));
1223        /*
1224         *      Now send the Fib to the adapter
1225         */
1226        return aac_fib_send(ContainerCommand64,
1227                          fib,
1228                          fibsize,
1229                          FsaNormal,
1230                          0, 1,
1231                          (fib_callback) io_callback,
1232                          (void *) cmd);
1233}
1234
1235static int aac_read_block(struct fib * fib, struct scsi_cmnd * cmd, u64 lba, u32 count)
1236{
1237        u16 fibsize;
1238        struct aac_read *readcmd;
1239        struct aac_dev *dev = fib->dev;
1240        long ret;
1241
1242        aac_fib_init(fib);
1243        readcmd = (struct aac_read *) fib_data(fib);
1244        readcmd->command = cpu_to_le32(VM_CtBlockRead);
1245        readcmd->cid = cpu_to_le32(scmd_id(cmd));
1246        readcmd->block = cpu_to_le32((u32)(lba&0xffffffff));
1247        readcmd->count = cpu_to_le32(count *
1248                dev->fsa_dev[scmd_id(cmd)].block_size);
1249
1250        ret = aac_build_sg(cmd, &readcmd->sg);
1251        if (ret < 0)
1252                return ret;
1253        fibsize = sizeof(struct aac_read) +
1254                        ((le32_to_cpu(readcmd->sg.count) - 1) *
1255                         sizeof (struct sgentry));
1256        BUG_ON (fibsize > (fib->dev->max_fib_size -
1257                                sizeof(struct aac_fibhdr)));
1258        /*
1259         *      Now send the Fib to the adapter
1260         */
1261        return aac_fib_send(ContainerCommand,
1262                          fib,
1263                          fibsize,
1264                          FsaNormal,
1265                          0, 1,
1266                          (fib_callback) io_callback,
1267                          (void *) cmd);
1268}
1269
1270static int aac_write_raw_io(struct fib * fib, struct scsi_cmnd * cmd, u64 lba, u32 count, int fua)
1271{
1272        struct aac_dev *dev = fib->dev;
1273        u16 fibsize, command;
1274        long ret;
1275
1276        aac_fib_init(fib);
1277        if (dev->comm_interface == AAC_COMM_MESSAGE_TYPE2 && !dev->sync_mode) {
1278                struct aac_raw_io2 *writecmd2;
1279                writecmd2 = (struct aac_raw_io2 *) fib_data(fib);
1280                memset(writecmd2, 0, sizeof(struct aac_raw_io2));
1281                writecmd2->blockLow = cpu_to_le32((u32)(lba&0xffffffff));
1282                writecmd2->blockHigh = cpu_to_le32((u32)((lba&0xffffffff00000000LL)>>32));
1283                writecmd2->byteCount = cpu_to_le32(count *
1284                        dev->fsa_dev[scmd_id(cmd)].block_size);
1285                writecmd2->cid = cpu_to_le16(scmd_id(cmd));
1286                writecmd2->flags = (fua && ((aac_cache & 5) != 1) &&
1287                                                   (((aac_cache & 5) != 5) || !fib->dev->cache_protected)) ?
1288                        cpu_to_le16(RIO2_IO_TYPE_WRITE|RIO2_IO_SUREWRITE) :
1289                        cpu_to_le16(RIO2_IO_TYPE_WRITE);
1290                ret = aac_build_sgraw2(cmd, writecmd2,
1291                                dev->scsi_host_ptr->sg_tablesize);
1292                if (ret < 0)
1293                        return ret;
1294                command = ContainerRawIo2;
1295                fibsize = sizeof(struct aac_raw_io2) +
1296                        ((le32_to_cpu(writecmd2->sgeCnt)-1) * sizeof(struct sge_ieee1212));
1297        } else {
1298                struct aac_raw_io *writecmd;
1299                writecmd = (struct aac_raw_io *) fib_data(fib);
1300                writecmd->block[0] = cpu_to_le32((u32)(lba&0xffffffff));
1301                writecmd->block[1] = cpu_to_le32((u32)((lba&0xffffffff00000000LL)>>32));
1302                writecmd->count = cpu_to_le32(count *
1303                        dev->fsa_dev[scmd_id(cmd)].block_size);
1304                writecmd->cid = cpu_to_le16(scmd_id(cmd));
1305                writecmd->flags = (fua && ((aac_cache & 5) != 1) &&
1306                                                   (((aac_cache & 5) != 5) || !fib->dev->cache_protected)) ?
1307                        cpu_to_le16(RIO_TYPE_WRITE|RIO_SUREWRITE) :
1308                        cpu_to_le16(RIO_TYPE_WRITE);
1309                writecmd->bpTotal = 0;
1310                writecmd->bpComplete = 0;
1311                ret = aac_build_sgraw(cmd, &writecmd->sg);
1312                if (ret < 0)
1313                        return ret;
1314                command = ContainerRawIo;
1315                fibsize = sizeof(struct aac_raw_io) +
1316                        ((le32_to_cpu(writecmd->sg.count)-1) * sizeof (struct sgentryraw));
1317        }
1318
1319        BUG_ON(fibsize > (fib->dev->max_fib_size - sizeof(struct aac_fibhdr)));
1320        /*
1321         *      Now send the Fib to the adapter
1322         */
1323        return aac_fib_send(command,
1324                          fib,
1325                          fibsize,
1326                          FsaNormal,
1327                          0, 1,
1328                          (fib_callback) io_callback,
1329                          (void *) cmd);
1330}
1331
1332static int aac_write_block64(struct fib * fib, struct scsi_cmnd * cmd, u64 lba, u32 count, int fua)
1333{
1334        u16 fibsize;
1335        struct aac_write64 *writecmd;
1336        long ret;
1337
1338        aac_fib_init(fib);
1339        writecmd = (struct aac_write64 *) fib_data(fib);
1340        writecmd->command = cpu_to_le32(VM_CtHostWrite64);
1341        writecmd->cid = cpu_to_le16(scmd_id(cmd));
1342        writecmd->sector_count = cpu_to_le16(count);
1343        writecmd->block = cpu_to_le32((u32)(lba&0xffffffff));
1344        writecmd->pad   = 0;
1345        writecmd->flags = 0;
1346
1347        ret = aac_build_sg64(cmd, &writecmd->sg);
1348        if (ret < 0)
1349                return ret;
1350        fibsize = sizeof(struct aac_write64) +
1351                ((le32_to_cpu(writecmd->sg.count) - 1) *
1352                 sizeof (struct sgentry64));
1353        BUG_ON (fibsize > (fib->dev->max_fib_size -
1354                                sizeof(struct aac_fibhdr)));
1355        /*
1356         *      Now send the Fib to the adapter
1357         */
1358        return aac_fib_send(ContainerCommand64,
1359                          fib,
1360                          fibsize,
1361                          FsaNormal,
1362                          0, 1,
1363                          (fib_callback) io_callback,
1364                          (void *) cmd);
1365}
1366
1367static int aac_write_block(struct fib * fib, struct scsi_cmnd * cmd, u64 lba, u32 count, int fua)
1368{
1369        u16 fibsize;
1370        struct aac_write *writecmd;
1371        struct aac_dev *dev = fib->dev;
1372        long ret;
1373
1374        aac_fib_init(fib);
1375        writecmd = (struct aac_write *) fib_data(fib);
1376        writecmd->command = cpu_to_le32(VM_CtBlockWrite);
1377        writecmd->cid = cpu_to_le32(scmd_id(cmd));
1378        writecmd->block = cpu_to_le32((u32)(lba&0xffffffff));
1379        writecmd->count = cpu_to_le32(count *
1380                dev->fsa_dev[scmd_id(cmd)].block_size);
1381        writecmd->sg.count = cpu_to_le32(1);
1382        /* ->stable is not used - it did mean which type of write */
1383
1384        ret = aac_build_sg(cmd, &writecmd->sg);
1385        if (ret < 0)
1386                return ret;
1387        fibsize = sizeof(struct aac_write) +
1388                ((le32_to_cpu(writecmd->sg.count) - 1) *
1389                 sizeof (struct sgentry));
1390        BUG_ON (fibsize > (fib->dev->max_fib_size -
1391                                sizeof(struct aac_fibhdr)));
1392        /*
1393         *      Now send the Fib to the adapter
1394         */
1395        return aac_fib_send(ContainerCommand,
1396                          fib,
1397                          fibsize,
1398                          FsaNormal,
1399                          0, 1,
1400                          (fib_callback) io_callback,
1401                          (void *) cmd);
1402}
1403
1404static struct aac_srb * aac_scsi_common(struct fib * fib, struct scsi_cmnd * cmd)
1405{
1406        struct aac_srb * srbcmd;
1407        u32 flag;
1408        u32 timeout;
1409
1410        aac_fib_init(fib);
1411        switch(cmd->sc_data_direction){
1412        case DMA_TO_DEVICE:
1413                flag = SRB_DataOut;
1414                break;
1415        case DMA_BIDIRECTIONAL:
1416                flag = SRB_DataIn | SRB_DataOut;
1417                break;
1418        case DMA_FROM_DEVICE:
1419                flag = SRB_DataIn;
1420                break;
1421        case DMA_NONE:
1422        default:        /* shuts up some versions of gcc */
1423                flag = SRB_NoDataXfer;
1424                break;
1425        }
1426
1427        srbcmd = (struct aac_srb*) fib_data(fib);
1428        srbcmd->function = cpu_to_le32(SRBF_ExecuteScsi);
1429        srbcmd->channel  = cpu_to_le32(aac_logical_to_phys(scmd_channel(cmd)));
1430        srbcmd->id       = cpu_to_le32(scmd_id(cmd));
1431        srbcmd->lun      = cpu_to_le32(cmd->device->lun);
1432        srbcmd->flags    = cpu_to_le32(flag);
1433        timeout = cmd->request->timeout/HZ;
1434        if (timeout == 0)
1435                timeout = 1;
1436        srbcmd->timeout  = cpu_to_le32(timeout);  // timeout in seconds
1437        srbcmd->retry_limit = 0; /* Obsolete parameter */
1438        srbcmd->cdb_size = cpu_to_le32(cmd->cmd_len);
1439        return srbcmd;
1440}
1441
1442static void aac_srb_callback(void *context, struct fib * fibptr);
1443
1444static int aac_scsi_64(struct fib * fib, struct scsi_cmnd * cmd)
1445{
1446        u16 fibsize;
1447        struct aac_srb * srbcmd = aac_scsi_common(fib, cmd);
1448        long ret;
1449
1450        ret = aac_build_sg64(cmd, (struct sgmap64 *) &srbcmd->sg);
1451        if (ret < 0)
1452                return ret;
1453        srbcmd->count = cpu_to_le32(scsi_bufflen(cmd));
1454
1455        memset(srbcmd->cdb, 0, sizeof(srbcmd->cdb));
1456        memcpy(srbcmd->cdb, cmd->cmnd, cmd->cmd_len);
1457        /*
1458         *      Build Scatter/Gather list
1459         */
1460        fibsize = sizeof (struct aac_srb) - sizeof (struct sgentry) +
1461                ((le32_to_cpu(srbcmd->sg.count) & 0xff) *
1462                 sizeof (struct sgentry64));
1463        BUG_ON (fibsize > (fib->dev->max_fib_size -
1464                                sizeof(struct aac_fibhdr)));
1465
1466        /*
1467         *      Now send the Fib to the adapter
1468         */
1469        return aac_fib_send(ScsiPortCommand64, fib,
1470                                fibsize, FsaNormal, 0, 1,
1471                                  (fib_callback) aac_srb_callback,
1472                                  (void *) cmd);
1473}
1474
1475static int aac_scsi_32(struct fib * fib, struct scsi_cmnd * cmd)
1476{
1477        u16 fibsize;
1478        struct aac_srb * srbcmd = aac_scsi_common(fib, cmd);
1479        long ret;
1480
1481        ret = aac_build_sg(cmd, (struct sgmap *)&srbcmd->sg);
1482        if (ret < 0)
1483                return ret;
1484        srbcmd->count = cpu_to_le32(scsi_bufflen(cmd));
1485
1486        memset(srbcmd->cdb, 0, sizeof(srbcmd->cdb));
1487        memcpy(srbcmd->cdb, cmd->cmnd, cmd->cmd_len);
1488        /*
1489         *      Build Scatter/Gather list
1490         */
1491        fibsize = sizeof (struct aac_srb) +
1492                (((le32_to_cpu(srbcmd->sg.count) & 0xff) - 1) *
1493                 sizeof (struct sgentry));
1494        BUG_ON (fibsize > (fib->dev->max_fib_size -
1495                                sizeof(struct aac_fibhdr)));
1496
1497        /*
1498         *      Now send the Fib to the adapter
1499         */
1500        return aac_fib_send(ScsiPortCommand, fib, fibsize, FsaNormal, 0, 1,
1501                                  (fib_callback) aac_srb_callback, (void *) cmd);
1502}
1503
1504static int aac_scsi_32_64(struct fib * fib, struct scsi_cmnd * cmd)
1505{
1506        if ((sizeof(dma_addr_t) > 4) && fib->dev->needs_dac &&
1507            (fib->dev->adapter_info.options & AAC_OPT_SGMAP_HOST64))
1508                return FAILED;
1509        return aac_scsi_32(fib, cmd);
1510}
1511
1512int aac_get_adapter_info(struct aac_dev* dev)
1513{
1514        struct fib* fibptr;
1515        int rcode;
1516        u32 tmp;
1517        struct aac_adapter_info *info;
1518        struct aac_bus_info *command;
1519        struct aac_bus_info_response *bus_info;
1520
1521        if (!(fibptr = aac_fib_alloc(dev)))
1522                return -ENOMEM;
1523
1524        aac_fib_init(fibptr);
1525        info = (struct aac_adapter_info *) fib_data(fibptr);
1526        memset(info,0,sizeof(*info));
1527
1528        rcode = aac_fib_send(RequestAdapterInfo,
1529                         fibptr,
1530                         sizeof(*info),
1531                         FsaNormal,
1532                         -1, 1, /* First `interrupt' command uses special wait */
1533                         NULL,
1534                         NULL);
1535
1536        if (rcode < 0) {
1537                /* FIB should be freed only after
1538                 * getting the response from the F/W */
1539                if (rcode != -ERESTARTSYS) {
1540                        aac_fib_complete(fibptr);
1541                        aac_fib_free(fibptr);
1542                }
1543                return rcode;
1544        }
1545        memcpy(&dev->adapter_info, info, sizeof(*info));
1546
1547        if (dev->adapter_info.options & AAC_OPT_SUPPLEMENT_ADAPTER_INFO) {
1548                struct aac_supplement_adapter_info * sinfo;
1549
1550                aac_fib_init(fibptr);
1551
1552                sinfo = (struct aac_supplement_adapter_info *) fib_data(fibptr);
1553
1554                memset(sinfo,0,sizeof(*sinfo));
1555
1556                rcode = aac_fib_send(RequestSupplementAdapterInfo,
1557                                 fibptr,
1558                                 sizeof(*sinfo),
1559                                 FsaNormal,
1560                                 1, 1,
1561                                 NULL,
1562                                 NULL);
1563
1564                if (rcode >= 0)
1565                        memcpy(&dev->supplement_adapter_info, sinfo, sizeof(*sinfo));
1566                if (rcode == -ERESTARTSYS) {
1567                        fibptr = aac_fib_alloc(dev);
1568                        if (!fibptr)
1569                                return -ENOMEM;
1570                }
1571
1572        }
1573
1574
1575        /*
1576         * GetBusInfo
1577         */
1578
1579        aac_fib_init(fibptr);
1580
1581        bus_info = (struct aac_bus_info_response *) fib_data(fibptr);
1582
1583        memset(bus_info, 0, sizeof(*bus_info));
1584
1585        command = (struct aac_bus_info *)bus_info;
1586
1587        command->Command = cpu_to_le32(VM_Ioctl);
1588        command->ObjType = cpu_to_le32(FT_DRIVE);
1589        command->MethodId = cpu_to_le32(1);
1590        command->CtlCmd = cpu_to_le32(GetBusInfo);
1591
1592        rcode = aac_fib_send(ContainerCommand,
1593                         fibptr,
1594                         sizeof (*bus_info),
1595                         FsaNormal,
1596                         1, 1,
1597                         NULL, NULL);
1598
1599        /* reasoned default */
1600        dev->maximum_num_physicals = 16;
1601        if (rcode >= 0 && le32_to_cpu(bus_info->Status) == ST_OK) {
1602                dev->maximum_num_physicals = le32_to_cpu(bus_info->TargetsPerBus);
1603                dev->maximum_num_channels = le32_to_cpu(bus_info->BusCount);
1604        }
1605
1606        if (!dev->in_reset) {
1607                char buffer[16];
1608                tmp = le32_to_cpu(dev->adapter_info.kernelrev);
1609                printk(KERN_INFO "%s%d: kernel %d.%d-%d[%d] %.*s\n",
1610                        dev->name,
1611                        dev->id,
1612                        tmp>>24,
1613                        (tmp>>16)&0xff,
1614                        tmp&0xff,
1615                        le32_to_cpu(dev->adapter_info.kernelbuild),
1616                        (int)sizeof(dev->supplement_adapter_info.BuildDate),
1617                        dev->supplement_adapter_info.BuildDate);
1618                tmp = le32_to_cpu(dev->adapter_info.monitorrev);
1619                printk(KERN_INFO "%s%d: monitor %d.%d-%d[%d]\n",
1620                        dev->name, dev->id,
1621                        tmp>>24,(tmp>>16)&0xff,tmp&0xff,
1622                        le32_to_cpu(dev->adapter_info.monitorbuild));
1623                tmp = le32_to_cpu(dev->adapter_info.biosrev);
1624                printk(KERN_INFO "%s%d: bios %d.%d-%d[%d]\n",
1625                        dev->name, dev->id,
1626                        tmp>>24,(tmp>>16)&0xff,tmp&0xff,
1627                        le32_to_cpu(dev->adapter_info.biosbuild));
1628                buffer[0] = '\0';
1629                if (aac_get_serial_number(
1630                  shost_to_class(dev->scsi_host_ptr), buffer))
1631                        printk(KERN_INFO "%s%d: serial %s",
1632                          dev->name, dev->id, buffer);
1633                if (dev->supplement_adapter_info.VpdInfo.Tsid[0]) {
1634                        printk(KERN_INFO "%s%d: TSID %.*s\n",
1635                          dev->name, dev->id,
1636                          (int)sizeof(dev->supplement_adapter_info.VpdInfo.Tsid),
1637                          dev->supplement_adapter_info.VpdInfo.Tsid);
1638                }
1639                if (!aac_check_reset || ((aac_check_reset == 1) &&
1640                  (dev->supplement_adapter_info.SupportedOptions2 &
1641                  AAC_OPTION_IGNORE_RESET))) {
1642                        printk(KERN_INFO "%s%d: Reset Adapter Ignored\n",
1643                          dev->name, dev->id);
1644                }
1645        }
1646
1647        dev->cache_protected = 0;
1648        dev->jbod = ((dev->supplement_adapter_info.FeatureBits &
1649                AAC_FEATURE_JBOD) != 0);
1650        dev->nondasd_support = 0;
1651        dev->raid_scsi_mode = 0;
1652        if(dev->adapter_info.options & AAC_OPT_NONDASD)
1653                dev->nondasd_support = 1;
1654
1655        /*
1656         * If the firmware supports ROMB RAID/SCSI mode and we are currently
1657         * in RAID/SCSI mode, set the flag. For now if in this mode we will
1658         * force nondasd support on. If we decide to allow the non-dasd flag
1659         * additional changes changes will have to be made to support
1660         * RAID/SCSI.  the function aac_scsi_cmd in this module will have to be
1661         * changed to support the new dev->raid_scsi_mode flag instead of
1662         * leaching off of the dev->nondasd_support flag. Also in linit.c the
1663         * function aac_detect will have to be modified where it sets up the
1664         * max number of channels based on the aac->nondasd_support flag only.
1665         */
1666        if ((dev->adapter_info.options & AAC_OPT_SCSI_MANAGED) &&
1667            (dev->adapter_info.options & AAC_OPT_RAID_SCSI_MODE)) {
1668                dev->nondasd_support = 1;
1669                dev->raid_scsi_mode = 1;
1670        }
1671        if (dev->raid_scsi_mode != 0)
1672                printk(KERN_INFO "%s%d: ROMB RAID/SCSI mode enabled\n",
1673                                dev->name, dev->id);
1674
1675        if (nondasd != -1)
1676                dev->nondasd_support = (nondasd!=0);
1677        if (dev->nondasd_support && !dev->in_reset)
1678                printk(KERN_INFO "%s%d: Non-DASD support enabled.\n",dev->name, dev->id);
1679
1680        if (dma_get_required_mask(&dev->pdev->dev) > DMA_BIT_MASK(32))
1681                dev->needs_dac = 1;
1682        dev->dac_support = 0;
1683        if ((sizeof(dma_addr_t) > 4) && dev->needs_dac &&
1684            (dev->adapter_info.options & AAC_OPT_SGMAP_HOST64)) {
1685                if (!dev->in_reset)
1686                        printk(KERN_INFO "%s%d: 64bit support enabled.\n",
1687                                dev->name, dev->id);
1688                dev->dac_support = 1;
1689        }
1690
1691        if(dacmode != -1) {
1692                dev->dac_support = (dacmode!=0);
1693        }
1694
1695        /* avoid problems with AAC_QUIRK_SCSI_32 controllers */
1696        if (dev->dac_support && (aac_get_driver_ident(dev->cardtype)->quirks
1697                & AAC_QUIRK_SCSI_32)) {
1698                dev->nondasd_support = 0;
1699                dev->jbod = 0;
1700                expose_physicals = 0;
1701        }
1702
1703        if(dev->dac_support != 0) {
1704                if (!pci_set_dma_mask(dev->pdev, DMA_BIT_MASK(64)) &&
1705                        !pci_set_consistent_dma_mask(dev->pdev, DMA_BIT_MASK(64))) {
1706                        if (!dev->in_reset)
1707                                printk(KERN_INFO"%s%d: 64 Bit DAC enabled\n",
1708                                        dev->name, dev->id);
1709                } else if (!pci_set_dma_mask(dev->pdev, DMA_BIT_MASK(32)) &&
1710                        !pci_set_consistent_dma_mask(dev->pdev, DMA_BIT_MASK(32))) {
1711                        printk(KERN_INFO"%s%d: DMA mask set failed, 64 Bit DAC disabled\n",
1712                                dev->name, dev->id);
1713                        dev->dac_support = 0;
1714                } else {
1715                        printk(KERN_WARNING"%s%d: No suitable DMA available.\n",
1716                                dev->name, dev->id);
1717                        rcode = -ENOMEM;
1718                }
1719        }
1720        /*
1721         * Deal with configuring for the individualized limits of each packet
1722         * interface.
1723         */
1724        dev->a_ops.adapter_scsi = (dev->dac_support)
1725          ? ((aac_get_driver_ident(dev->cardtype)->quirks & AAC_QUIRK_SCSI_32)
1726                                ? aac_scsi_32_64
1727                                : aac_scsi_64)
1728                                : aac_scsi_32;
1729        if (dev->raw_io_interface) {
1730                dev->a_ops.adapter_bounds = (dev->raw_io_64)
1731                                        ? aac_bounds_64
1732                                        : aac_bounds_32;
1733                dev->a_ops.adapter_read = aac_read_raw_io;
1734                dev->a_ops.adapter_write = aac_write_raw_io;
1735        } else {
1736                dev->a_ops.adapter_bounds = aac_bounds_32;
1737                dev->scsi_host_ptr->sg_tablesize = (dev->max_fib_size -
1738                        sizeof(struct aac_fibhdr) -
1739                        sizeof(struct aac_write) + sizeof(struct sgentry)) /
1740                                sizeof(struct sgentry);
1741                if (dev->dac_support) {
1742                        dev->a_ops.adapter_read = aac_read_block64;
1743                        dev->a_ops.adapter_write = aac_write_block64;
1744                        /*
1745                         * 38 scatter gather elements
1746                         */
1747                        dev->scsi_host_ptr->sg_tablesize =
1748                                (dev->max_fib_size -
1749                                sizeof(struct aac_fibhdr) -
1750                                sizeof(struct aac_write64) +
1751                                sizeof(struct sgentry64)) /
1752                                        sizeof(struct sgentry64);
1753                } else {
1754                        dev->a_ops.adapter_read = aac_read_block;
1755                        dev->a_ops.adapter_write = aac_write_block;
1756                }
1757                dev->scsi_host_ptr->max_sectors = AAC_MAX_32BIT_SGBCOUNT;
1758                if (!(dev->adapter_info.options & AAC_OPT_NEW_COMM)) {
1759                        /*
1760                         * Worst case size that could cause sg overflow when
1761                         * we break up SG elements that are larger than 64KB.
1762                         * Would be nice if we could tell the SCSI layer what
1763                         * the maximum SG element size can be. Worst case is
1764                         * (sg_tablesize-1) 4KB elements with one 64KB
1765                         * element.
1766                         *      32bit -> 468 or 238KB   64bit -> 424 or 212KB
1767                         */
1768                        dev->scsi_host_ptr->max_sectors =
1769                          (dev->scsi_host_ptr->sg_tablesize * 8) + 112;
1770                }
1771        }
1772        /* FIB should be freed only after getting the response from the F/W */
1773        if (rcode != -ERESTARTSYS) {
1774                aac_fib_complete(fibptr);
1775                aac_fib_free(fibptr);
1776        }
1777
1778        return rcode;
1779}
1780
1781
1782static void io_callback(void *context, struct fib * fibptr)
1783{
1784        struct aac_dev *dev;
1785        struct aac_read_reply *readreply;
1786        struct scsi_cmnd *scsicmd;
1787        u32 cid;
1788
1789        scsicmd = (struct scsi_cmnd *) context;
1790
1791        if (!aac_valid_context(scsicmd, fibptr))
1792                return;
1793
1794        dev = fibptr->dev;
1795        cid = scmd_id(scsicmd);
1796
1797        if (nblank(dprintk(x))) {
1798                u64 lba;
1799                switch (scsicmd->cmnd[0]) {
1800                case WRITE_6:
1801                case READ_6:
1802                        lba = ((scsicmd->cmnd[1] & 0x1F) << 16) |
1803                            (scsicmd->cmnd[2] << 8) | scsicmd->cmnd[3];
1804                        break;
1805                case WRITE_16:
1806                case READ_16:
1807                        lba = ((u64)scsicmd->cmnd[2] << 56) |
1808                              ((u64)scsicmd->cmnd[3] << 48) |
1809                              ((u64)scsicmd->cmnd[4] << 40) |
1810                              ((u64)scsicmd->cmnd[5] << 32) |
1811                              ((u64)scsicmd->cmnd[6] << 24) |
1812                              (scsicmd->cmnd[7] << 16) |
1813                              (scsicmd->cmnd[8] << 8) | scsicmd->cmnd[9];
1814                        break;
1815                case WRITE_12:
1816                case READ_12:
1817                        lba = ((u64)scsicmd->cmnd[2] << 24) |
1818                              (scsicmd->cmnd[3] << 16) |
1819                              (scsicmd->cmnd[4] << 8) | scsicmd->cmnd[5];
1820                        break;
1821                default:
1822                        lba = ((u64)scsicmd->cmnd[2] << 24) |
1823                               (scsicmd->cmnd[3] << 16) |
1824                               (scsicmd->cmnd[4] << 8) | scsicmd->cmnd[5];
1825                        break;
1826                }
1827                printk(KERN_DEBUG
1828                  "io_callback[cpu %d]: lba = %llu, t = %ld.\n",
1829                  smp_processor_id(), (unsigned long long)lba, jiffies);
1830        }
1831
1832        BUG_ON(fibptr == NULL);
1833
1834        scsi_dma_unmap(scsicmd);
1835
1836        readreply = (struct aac_read_reply *)fib_data(fibptr);
1837        switch (le32_to_cpu(readreply->status)) {
1838        case ST_OK:
1839                scsicmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8 |
1840                        SAM_STAT_GOOD;
1841                dev->fsa_dev[cid].sense_data.sense_key = NO_SENSE;
1842                break;
1843        case ST_NOT_READY:
1844                scsicmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8 |
1845                        SAM_STAT_CHECK_CONDITION;
1846                set_sense(&dev->fsa_dev[cid].sense_data, NOT_READY,
1847                  SENCODE_BECOMING_READY, ASENCODE_BECOMING_READY, 0, 0);
1848                memcpy(scsicmd->sense_buffer, &dev->fsa_dev[cid].sense_data,
1849                       min_t(size_t, sizeof(dev->fsa_dev[cid].sense_data),
1850                             SCSI_SENSE_BUFFERSIZE));
1851                break;
1852        default:
1853#ifdef AAC_DETAILED_STATUS_INFO
1854                printk(KERN_WARNING "io_callback: io failed, status = %d\n",
1855                  le32_to_cpu(readreply->status));
1856#endif
1857                scsicmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8 |
1858                        SAM_STAT_CHECK_CONDITION;
1859                set_sense(&dev->fsa_dev[cid].sense_data,
1860                  HARDWARE_ERROR, SENCODE_INTERNAL_TARGET_FAILURE,
1861                  ASENCODE_INTERNAL_TARGET_FAILURE, 0, 0);
1862                memcpy(scsicmd->sense_buffer, &dev->fsa_dev[cid].sense_data,
1863                       min_t(size_t, sizeof(dev->fsa_dev[cid].sense_data),
1864                             SCSI_SENSE_BUFFERSIZE));
1865                break;
1866        }
1867        aac_fib_complete(fibptr);
1868
1869        scsicmd->scsi_done(scsicmd);
1870}
1871
1872static int aac_read(struct scsi_cmnd * scsicmd)
1873{
1874        u64 lba;
1875        u32 count;
1876        int status;
1877        struct aac_dev *dev;
1878        struct fib * cmd_fibcontext;
1879        int cid;
1880
1881        dev = (struct aac_dev *)scsicmd->device->host->hostdata;
1882        /*
1883         *      Get block address and transfer length
1884         */
1885        switch (scsicmd->cmnd[0]) {
1886        case READ_6:
1887                dprintk((KERN_DEBUG "aachba: received a read(6) command on id %d.\n", scmd_id(scsicmd)));
1888
1889                lba = ((scsicmd->cmnd[1] & 0x1F) << 16) |
1890                        (scsicmd->cmnd[2] << 8) | scsicmd->cmnd[3];
1891                count = scsicmd->cmnd[4];
1892
1893                if (count == 0)
1894                        count = 256;
1895                break;
1896        case READ_16:
1897                dprintk((KERN_DEBUG "aachba: received a read(16) command on id %d.\n", scmd_id(scsicmd)));
1898
1899                lba =   ((u64)scsicmd->cmnd[2] << 56) |
1900                        ((u64)scsicmd->cmnd[3] << 48) |
1901                        ((u64)scsicmd->cmnd[4] << 40) |
1902                        ((u64)scsicmd->cmnd[5] << 32) |
1903                        ((u64)scsicmd->cmnd[6] << 24) |
1904                        (scsicmd->cmnd[7] << 16) |
1905                        (scsicmd->cmnd[8] << 8) | scsicmd->cmnd[9];
1906                count = (scsicmd->cmnd[10] << 24) |
1907                        (scsicmd->cmnd[11] << 16) |
1908                        (scsicmd->cmnd[12] << 8) | scsicmd->cmnd[13];
1909                break;
1910        case READ_12:
1911                dprintk((KERN_DEBUG "aachba: received a read(12) command on id %d.\n", scmd_id(scsicmd)));
1912
1913                lba = ((u64)scsicmd->cmnd[2] << 24) |
1914                        (scsicmd->cmnd[3] << 16) |
1915                        (scsicmd->cmnd[4] << 8) | scsicmd->cmnd[5];
1916                count = (scsicmd->cmnd[6] << 24) |
1917                        (scsicmd->cmnd[7] << 16) |
1918                        (scsicmd->cmnd[8] << 8) | scsicmd->cmnd[9];
1919                break;
1920        default:
1921                dprintk((KERN_DEBUG "aachba: received a read(10) command on id %d.\n", scmd_id(scsicmd)));
1922
1923                lba = ((u64)scsicmd->cmnd[2] << 24) |
1924                        (scsicmd->cmnd[3] << 16) |
1925                        (scsicmd->cmnd[4] << 8) | scsicmd->cmnd[5];
1926                count = (scsicmd->cmnd[7] << 8) | scsicmd->cmnd[8];
1927                break;
1928        }
1929
1930        if ((lba + count) > (dev->fsa_dev[scmd_id(scsicmd)].size)) {
1931                cid = scmd_id(scsicmd);
1932                dprintk((KERN_DEBUG "aacraid: Illegal lba\n"));
1933                scsicmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8 |
1934                        SAM_STAT_CHECK_CONDITION;
1935                set_sense(&dev->fsa_dev[cid].sense_data,
1936                          HARDWARE_ERROR, SENCODE_INTERNAL_TARGET_FAILURE,
1937                          ASENCODE_INTERNAL_TARGET_FAILURE, 0, 0);
1938                memcpy(scsicmd->sense_buffer, &dev->fsa_dev[cid].sense_data,
1939                       min_t(size_t, sizeof(dev->fsa_dev[cid].sense_data),
1940                             SCSI_SENSE_BUFFERSIZE));
1941                scsicmd->scsi_done(scsicmd);
1942                return 1;
1943        }
1944
1945        dprintk((KERN_DEBUG "aac_read[cpu %d]: lba = %llu, t = %ld.\n",
1946          smp_processor_id(), (unsigned long long)lba, jiffies));
1947        if (aac_adapter_bounds(dev,scsicmd,lba))
1948                return 0;
1949        /*
1950         *      Alocate and initialize a Fib
1951         */
1952        cmd_fibcontext = aac_fib_alloc_tag(dev, scsicmd);
1953        if (!cmd_fibcontext) {
1954                printk(KERN_WARNING "aac_read: fib allocation failed\n");
1955                return -1;
1956        }
1957
1958        status = aac_adapter_read(cmd_fibcontext, scsicmd, lba, count);
1959
1960        /*
1961         *      Check that the command queued to the controller
1962         */
1963        if (status == -EINPROGRESS) {
1964                scsicmd->SCp.phase = AAC_OWNER_FIRMWARE;
1965                return 0;
1966        }
1967
1968        printk(KERN_WARNING "aac_read: aac_fib_send failed with status: %d.\n", status);
1969        /*
1970         *      For some reason, the Fib didn't queue, return QUEUE_FULL
1971         */
1972        scsicmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8 | SAM_STAT_TASK_SET_FULL;
1973        scsicmd->scsi_done(scsicmd);
1974        aac_fib_complete(cmd_fibcontext);
1975        aac_fib_free(cmd_fibcontext);
1976        return 0;
1977}
1978
1979static int aac_write(struct scsi_cmnd * scsicmd)
1980{
1981        u64 lba;
1982        u32 count;
1983        int fua;
1984        int status;
1985        struct aac_dev *dev;
1986        struct fib * cmd_fibcontext;
1987        int cid;
1988
1989        dev = (struct aac_dev *)scsicmd->device->host->hostdata;
1990        /*
1991         *      Get block address and transfer length
1992         */
1993        if (scsicmd->cmnd[0] == WRITE_6)        /* 6 byte command */
1994        {
1995                lba = ((scsicmd->cmnd[1] & 0x1F) << 16) | (scsicmd->cmnd[2] << 8) | scsicmd->cmnd[3];
1996                count = scsicmd->cmnd[4];
1997                if (count == 0)
1998                        count = 256;
1999                fua = 0;
2000        } else if (scsicmd->cmnd[0] == WRITE_16) { /* 16 byte command */
2001                dprintk((KERN_DEBUG "aachba: received a write(16) command on id %d.\n", scmd_id(scsicmd)));
2002
2003                lba =   ((u64)scsicmd->cmnd[2] << 56) |
2004                        ((u64)scsicmd->cmnd[3] << 48) |
2005                        ((u64)scsicmd->cmnd[4] << 40) |
2006                        ((u64)scsicmd->cmnd[5] << 32) |
2007                        ((u64)scsicmd->cmnd[6] << 24) |
2008                        (scsicmd->cmnd[7] << 16) |
2009                        (scsicmd->cmnd[8] << 8) | scsicmd->cmnd[9];
2010                count = (scsicmd->cmnd[10] << 24) | (scsicmd->cmnd[11] << 16) |
2011                        (scsicmd->cmnd[12] << 8) | scsicmd->cmnd[13];
2012                fua = scsicmd->cmnd[1] & 0x8;
2013        } else if (scsicmd->cmnd[0] == WRITE_12) { /* 12 byte command */
2014                dprintk((KERN_DEBUG "aachba: received a write(12) command on id %d.\n", scmd_id(scsicmd)));
2015
2016                lba = ((u64)scsicmd->cmnd[2] << 24) | (scsicmd->cmnd[3] << 16)
2017                    | (scsicmd->cmnd[4] << 8) | scsicmd->cmnd[5];
2018                count = (scsicmd->cmnd[6] << 24) | (scsicmd->cmnd[7] << 16)
2019                      | (scsicmd->cmnd[8] << 8) | scsicmd->cmnd[9];
2020                fua = scsicmd->cmnd[1] & 0x8;
2021        } else {
2022                dprintk((KERN_DEBUG "aachba: received a write(10) command on id %d.\n", scmd_id(scsicmd)));
2023                lba = ((u64)scsicmd->cmnd[2] << 24) | (scsicmd->cmnd[3] << 16) | (scsicmd->cmnd[4] << 8) | scsicmd->cmnd[5];
2024                count = (scsicmd->cmnd[7] << 8) | scsicmd->cmnd[8];
2025                fua = scsicmd->cmnd[1] & 0x8;
2026        }
2027
2028        if ((lba + count) > (dev->fsa_dev[scmd_id(scsicmd)].size)) {
2029                cid = scmd_id(scsicmd);
2030                dprintk((KERN_DEBUG "aacraid: Illegal lba\n"));
2031                scsicmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8 |
2032                        SAM_STAT_CHECK_CONDITION;
2033                set_sense(&dev->fsa_dev[cid].sense_data,
2034                          HARDWARE_ERROR, SENCODE_INTERNAL_TARGET_FAILURE,
2035                          ASENCODE_INTERNAL_TARGET_FAILURE, 0, 0);
2036                memcpy(scsicmd->sense_buffer, &dev->fsa_dev[cid].sense_data,
2037                       min_t(size_t, sizeof(dev->fsa_dev[cid].sense_data),
2038                             SCSI_SENSE_BUFFERSIZE));
2039                scsicmd->scsi_done(scsicmd);
2040                return 1;
2041        }
2042
2043        dprintk((KERN_DEBUG "aac_write[cpu %d]: lba = %llu, t = %ld.\n",
2044          smp_processor_id(), (unsigned long long)lba, jiffies));
2045        if (aac_adapter_bounds(dev,scsicmd,lba))
2046                return 0;
2047        /*
2048         *      Allocate and initialize a Fib then setup a BlockWrite command
2049         */
2050        cmd_fibcontext = aac_fib_alloc_tag(dev, scsicmd);
2051        if (!cmd_fibcontext) {
2052                /* FIB temporarily unavailable,not catastrophic failure */
2053
2054                /* scsicmd->result = DID_ERROR << 16;
2055                 * scsicmd->scsi_done(scsicmd);
2056                 * return 0;
2057                 */
2058                printk(KERN_WARNING "aac_write: fib allocation failed\n");
2059                return -1;
2060        }
2061
2062        status = aac_adapter_write(cmd_fibcontext, scsicmd, lba, count, fua);
2063
2064        /*
2065         *      Check that the command queued to the controller
2066         */
2067        if (status == -EINPROGRESS) {
2068                scsicmd->SCp.phase = AAC_OWNER_FIRMWARE;
2069                return 0;
2070        }
2071
2072        printk(KERN_WARNING "aac_write: aac_fib_send failed with status: %d\n", status);
2073        /*
2074         *      For some reason, the Fib didn't queue, return QUEUE_FULL
2075         */
2076        scsicmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8 | SAM_STAT_TASK_SET_FULL;
2077        scsicmd->scsi_done(scsicmd);
2078
2079        aac_fib_complete(cmd_fibcontext);
2080        aac_fib_free(cmd_fibcontext);
2081        return 0;
2082}
2083
2084static void synchronize_callback(void *context, struct fib *fibptr)
2085{
2086        struct aac_synchronize_reply *synchronizereply;
2087        struct scsi_cmnd *cmd;
2088
2089        cmd = context;
2090
2091        if (!aac_valid_context(cmd, fibptr))
2092                return;
2093
2094        dprintk((KERN_DEBUG "synchronize_callback[cpu %d]: t = %ld.\n",
2095                                smp_processor_id(), jiffies));
2096        BUG_ON(fibptr == NULL);
2097
2098
2099        synchronizereply = fib_data(fibptr);
2100        if (le32_to_cpu(synchronizereply->status) == CT_OK)
2101                cmd->result = DID_OK << 16 |
2102                        COMMAND_COMPLETE << 8 | SAM_STAT_GOOD;
2103        else {
2104                struct scsi_device *sdev = cmd->device;
2105                struct aac_dev *dev = fibptr->dev;
2106                u32 cid = sdev_id(sdev);
2107                printk(KERN_WARNING
2108                     "synchronize_callback: synchronize failed, status = %d\n",
2109                     le32_to_cpu(synchronizereply->status));
2110                cmd->result = DID_OK << 16 |
2111                        COMMAND_COMPLETE << 8 | SAM_STAT_CHECK_CONDITION;
2112                set_sense(&dev->fsa_dev[cid].sense_data,
2113                  HARDWARE_ERROR, SENCODE_INTERNAL_TARGET_FAILURE,
2114                  ASENCODE_INTERNAL_TARGET_FAILURE, 0, 0);
2115                memcpy(cmd->sense_buffer, &dev->fsa_dev[cid].sense_data,
2116                       min_t(size_t, sizeof(dev->fsa_dev[cid].sense_data),
2117                             SCSI_SENSE_BUFFERSIZE));
2118        }
2119
2120        aac_fib_complete(fibptr);
2121        aac_fib_free(fibptr);
2122        cmd->scsi_done(cmd);
2123}
2124
2125static int aac_synchronize(struct scsi_cmnd *scsicmd)
2126{
2127        int status;
2128        struct fib *cmd_fibcontext;
2129        struct aac_synchronize *synchronizecmd;
2130        struct scsi_cmnd *cmd;
2131        struct scsi_device *sdev = scsicmd->device;
2132        int active = 0;
2133        struct aac_dev *aac;
2134        u64 lba = ((u64)scsicmd->cmnd[2] << 24) | (scsicmd->cmnd[3] << 16) |
2135                (scsicmd->cmnd[4] << 8) | scsicmd->cmnd[5];
2136        u32 count = (scsicmd->cmnd[7] << 8) | scsicmd->cmnd[8];
2137        unsigned long flags;
2138
2139        /*
2140         * Wait for all outstanding queued commands to complete to this
2141         * specific target (block).
2142         */
2143        spin_lock_irqsave(&sdev->list_lock, flags);
2144        list_for_each_entry(cmd, &sdev->cmd_list, list)
2145                if (cmd->SCp.phase == AAC_OWNER_FIRMWARE) {
2146                        u64 cmnd_lba;
2147                        u32 cmnd_count;
2148
2149                        if (cmd->cmnd[0] == WRITE_6) {
2150                                cmnd_lba = ((cmd->cmnd[1] & 0x1F) << 16) |
2151                                        (cmd->cmnd[2] << 8) |
2152                                        cmd->cmnd[3];
2153                                cmnd_count = cmd->cmnd[4];
2154                                if (cmnd_count == 0)
2155                                        cmnd_count = 256;
2156                        } else if (cmd->cmnd[0] == WRITE_16) {
2157                                cmnd_lba = ((u64)cmd->cmnd[2] << 56) |
2158                                        ((u64)cmd->cmnd[3] << 48) |
2159                                        ((u64)cmd->cmnd[4] << 40) |
2160                                        ((u64)cmd->cmnd[5] << 32) |
2161                                        ((u64)cmd->cmnd[6] << 24) |
2162                                        (cmd->cmnd[7] << 16) |
2163                                        (cmd->cmnd[8] << 8) |
2164                                        cmd->cmnd[9];
2165                                cmnd_count = (cmd->cmnd[10] << 24) |
2166                                        (cmd->cmnd[11] << 16) |
2167                                        (cmd->cmnd[12] << 8) |
2168                                        cmd->cmnd[13];
2169                        } else if (cmd->cmnd[0] == WRITE_12) {
2170                                cmnd_lba = ((u64)cmd->cmnd[2] << 24) |
2171                                        (cmd->cmnd[3] << 16) |
2172                                        (cmd->cmnd[4] << 8) |
2173                                        cmd->cmnd[5];
2174                                cmnd_count = (cmd->cmnd[6] << 24) |
2175                                        (cmd->cmnd[7] << 16) |
2176                                        (cmd->cmnd[8] << 8) |
2177                                        cmd->cmnd[9];
2178                        } else if (cmd->cmnd[0] == WRITE_10) {
2179                                cmnd_lba = ((u64)cmd->cmnd[2] << 24) |
2180                                        (cmd->cmnd[3] << 16) |
2181                                        (cmd->cmnd[4] << 8) |
2182                                        cmd->cmnd[5];
2183                                cmnd_count = (cmd->cmnd[7] << 8) |
2184                                        cmd->cmnd[8];
2185                        } else
2186                                continue;
2187                        if (((cmnd_lba + cmnd_count) < lba) ||
2188                          (count && ((lba + count) < cmnd_lba)))
2189                                continue;
2190                        ++active;
2191                        break;
2192                }
2193
2194        spin_unlock_irqrestore(&sdev->list_lock, flags);
2195
2196        /*
2197         *      Yield the processor (requeue for later)
2198         */
2199        if (active)
2200                return SCSI_MLQUEUE_DEVICE_BUSY;
2201
2202        aac = (struct aac_dev *)sdev->host->hostdata;
2203        if (aac->in_reset)
2204                return SCSI_MLQUEUE_HOST_BUSY;
2205
2206        /*
2207         *      Allocate and initialize a Fib
2208         */
2209        if (!(cmd_fibcontext = aac_fib_alloc(aac)))
2210                return SCSI_MLQUEUE_HOST_BUSY;
2211
2212        aac_fib_init(cmd_fibcontext);
2213
2214        synchronizecmd = fib_data(cmd_fibcontext);
2215        synchronizecmd->command = cpu_to_le32(VM_ContainerConfig);
2216        synchronizecmd->type = cpu_to_le32(CT_FLUSH_CACHE);
2217        synchronizecmd->cid = cpu_to_le32(scmd_id(scsicmd));
2218        synchronizecmd->count =
2219             cpu_to_le32(sizeof(((struct aac_synchronize_reply *)NULL)->data));
2220
2221        /*
2222         *      Now send the Fib to the adapter
2223         */
2224        status = aac_fib_send(ContainerCommand,
2225                  cmd_fibcontext,
2226                  sizeof(struct aac_synchronize),
2227                  FsaNormal,
2228                  0, 1,
2229                  (fib_callback)synchronize_callback,
2230                  (void *)scsicmd);
2231
2232        /*
2233         *      Check that the command queued to the controller
2234         */
2235        if (status == -EINPROGRESS) {
2236                scsicmd->SCp.phase = AAC_OWNER_FIRMWARE;
2237                return 0;
2238        }
2239
2240        printk(KERN_WARNING
2241                "aac_synchronize: aac_fib_send failed with status: %d.\n", status);
2242        aac_fib_complete(cmd_fibcontext);
2243        aac_fib_free(cmd_fibcontext);
2244        return SCSI_MLQUEUE_HOST_BUSY;
2245}
2246
2247static void aac_start_stop_callback(void *context, struct fib *fibptr)
2248{
2249        struct scsi_cmnd *scsicmd = context;
2250
2251        if (!aac_valid_context(scsicmd, fibptr))
2252                return;
2253
2254        BUG_ON(fibptr == NULL);
2255
2256        scsicmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8 | SAM_STAT_GOOD;
2257
2258        aac_fib_complete(fibptr);
2259        aac_fib_free(fibptr);
2260        scsicmd->scsi_done(scsicmd);
2261}
2262
2263static int aac_start_stop(struct scsi_cmnd *scsicmd)
2264{
2265        int status;
2266        struct fib *cmd_fibcontext;
2267        struct aac_power_management *pmcmd;
2268        struct scsi_device *sdev = scsicmd->device;
2269        struct aac_dev *aac = (struct aac_dev *)sdev->host->hostdata;
2270
2271        if (!(aac->supplement_adapter_info.SupportedOptions2 &
2272              AAC_OPTION_POWER_MANAGEMENT)) {
2273                scsicmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8 |
2274                                  SAM_STAT_GOOD;
2275                scsicmd->scsi_done(scsicmd);
2276                return 0;
2277        }
2278
2279        if (aac->in_reset)
2280                return SCSI_MLQUEUE_HOST_BUSY;
2281
2282        /*
2283         *      Allocate and initialize a Fib
2284         */
2285        cmd_fibcontext = aac_fib_alloc_tag(aac, scsicmd);
2286        if (!cmd_fibcontext)
2287                return SCSI_MLQUEUE_HOST_BUSY;
2288
2289        aac_fib_init(cmd_fibcontext);
2290
2291        pmcmd = fib_data(cmd_fibcontext);
2292        pmcmd->command = cpu_to_le32(VM_ContainerConfig);
2293        pmcmd->type = cpu_to_le32(CT_POWER_MANAGEMENT);
2294        /* Eject bit ignored, not relevant */
2295        pmcmd->sub = (scsicmd->cmnd[4] & 1) ?
2296                cpu_to_le32(CT_PM_START_UNIT) : cpu_to_le32(CT_PM_STOP_UNIT);
2297        pmcmd->cid = cpu_to_le32(sdev_id(sdev));
2298        pmcmd->parm = (scsicmd->cmnd[1] & 1) ?
2299                cpu_to_le32(CT_PM_UNIT_IMMEDIATE) : 0;
2300
2301        /*
2302         *      Now send the Fib to the adapter
2303         */
2304        status = aac_fib_send(ContainerCommand,
2305                  cmd_fibcontext,
2306                  sizeof(struct aac_power_management),
2307                  FsaNormal,
2308                  0, 1,
2309                  (fib_callback)aac_start_stop_callback,
2310                  (void *)scsicmd);
2311
2312        /*
2313         *      Check that the command queued to the controller
2314         */
2315        if (status == -EINPROGRESS) {
2316                scsicmd->SCp.phase = AAC_OWNER_FIRMWARE;
2317                return 0;
2318        }
2319
2320        aac_fib_complete(cmd_fibcontext);
2321        aac_fib_free(cmd_fibcontext);
2322        return SCSI_MLQUEUE_HOST_BUSY;
2323}
2324
2325/**
2326 *      aac_scsi_cmd()          -       Process SCSI command
2327 *      @scsicmd:               SCSI command block
2328 *
2329 *      Emulate a SCSI command and queue the required request for the
2330 *      aacraid firmware.
2331 */
2332
2333int aac_scsi_cmd(struct scsi_cmnd * scsicmd)
2334{
2335        u32 cid;
2336        struct Scsi_Host *host = scsicmd->device->host;
2337        struct aac_dev *dev = (struct aac_dev *)host->hostdata;
2338        struct fsa_dev_info *fsa_dev_ptr = dev->fsa_dev;
2339
2340        if (fsa_dev_ptr == NULL)
2341                return -1;
2342        /*
2343         *      If the bus, id or lun is out of range, return fail
2344         *      Test does not apply to ID 16, the pseudo id for the controller
2345         *      itself.
2346         */
2347        cid = scmd_id(scsicmd);
2348        if (cid != host->this_id) {
2349                if (scmd_channel(scsicmd) == CONTAINER_CHANNEL) {
2350                        if((cid >= dev->maximum_num_containers) ||
2351                                        (scsicmd->device->lun != 0)) {
2352                                scsicmd->result = DID_NO_CONNECT << 16;
2353                                scsicmd->scsi_done(scsicmd);
2354                                return 0;
2355                        }
2356
2357                        /*
2358                         *      If the target container doesn't exist, it may have
2359                         *      been newly created
2360                         */
2361                        if (((fsa_dev_ptr[cid].valid & 1) == 0) ||
2362                          (fsa_dev_ptr[cid].sense_data.sense_key ==
2363                           NOT_READY)) {
2364                                switch (scsicmd->cmnd[0]) {
2365                                case SERVICE_ACTION_IN_16:
2366                                        if (!(dev->raw_io_interface) ||
2367                                            !(dev->raw_io_64) ||
2368                                            ((scsicmd->cmnd[1] & 0x1f) != SAI_READ_CAPACITY_16))
2369                                                break;
2370                                case INQUIRY:
2371                                case READ_CAPACITY:
2372                                case TEST_UNIT_READY:
2373                                        if (dev->in_reset)
2374                                                return -1;
2375                                        return _aac_probe_container(scsicmd,
2376                                                        aac_probe_container_callback2);
2377                                default:
2378                                        break;
2379                                }
2380                        }
2381                } else {  /* check for physical non-dasd devices */
2382                        if (dev->nondasd_support || expose_physicals ||
2383                                        dev->jbod) {
2384                                if (dev->in_reset)
2385                                        return -1;
2386                                return aac_send_srb_fib(scsicmd);
2387                        } else {
2388                                scsicmd->result = DID_NO_CONNECT << 16;
2389                                scsicmd->scsi_done(scsicmd);
2390                                return 0;
2391                        }
2392                }
2393        }
2394        /*
2395         * else Command for the controller itself
2396         */
2397        else if ((scsicmd->cmnd[0] != INQUIRY) &&       /* only INQUIRY & TUR cmnd supported for controller */
2398                (scsicmd->cmnd[0] != TEST_UNIT_READY))
2399        {
2400                dprintk((KERN_WARNING "Only INQUIRY & TUR command supported for controller, rcvd = 0x%x.\n", scsicmd->cmnd[0]));
2401                scsicmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8 | SAM_STAT_CHECK_CONDITION;
2402                set_sense(&dev->fsa_dev[cid].sense_data,
2403                  ILLEGAL_REQUEST, SENCODE_INVALID_COMMAND,
2404                  ASENCODE_INVALID_COMMAND, 0, 0);
2405                memcpy(scsicmd->sense_buffer, &dev->fsa_dev[cid].sense_data,
2406                       min_t(size_t, sizeof(dev->fsa_dev[cid].sense_data),
2407                             SCSI_SENSE_BUFFERSIZE));
2408                scsicmd->scsi_done(scsicmd);
2409                return 0;
2410        }
2411
2412
2413        /* Handle commands here that don't really require going out to the adapter */
2414        switch (scsicmd->cmnd[0]) {
2415        case INQUIRY:
2416        {
2417                struct inquiry_data inq_data;
2418
2419                dprintk((KERN_DEBUG "INQUIRY command, ID: %d.\n", cid));
2420                memset(&inq_data, 0, sizeof (struct inquiry_data));
2421
2422                if ((scsicmd->cmnd[1] & 0x1) && aac_wwn) {
2423                        char *arr = (char *)&inq_data;
2424
2425                        /* EVPD bit set */
2426                        arr[0] = (scmd_id(scsicmd) == host->this_id) ?
2427                          INQD_PDT_PROC : INQD_PDT_DA;
2428                        if (scsicmd->cmnd[2] == 0) {
2429                                /* supported vital product data pages */
2430                                arr[3] = 3;
2431                                arr[4] = 0x0;
2432                                arr[5] = 0x80;
2433                                arr[6] = 0x83;
2434                                arr[1] = scsicmd->cmnd[2];
2435                                scsi_sg_copy_from_buffer(scsicmd, &inq_data,
2436                                                         sizeof(inq_data));
2437                                scsicmd->result = DID_OK << 16 |
2438                                  COMMAND_COMPLETE << 8 | SAM_STAT_GOOD;
2439                        } else if (scsicmd->cmnd[2] == 0x80) {
2440                                /* unit serial number page */
2441                                arr[3] = setinqserial(dev, &arr[4],
2442                                  scmd_id(scsicmd));
2443                                arr[1] = scsicmd->cmnd[2];
2444                                scsi_sg_copy_from_buffer(scsicmd, &inq_data,
2445                                                         sizeof(inq_data));
2446                                if (aac_wwn != 2)
2447                                        return aac_get_container_serial(
2448                                                scsicmd);
2449                                scsicmd->result = DID_OK << 16 |
2450                                  COMMAND_COMPLETE << 8 | SAM_STAT_GOOD;
2451                        } else if (scsicmd->cmnd[2] == 0x83) {
2452                                /* vpd page 0x83 - Device Identification Page */
2453                                char *sno = (char *)&inq_data;
2454                                sno[3] = setinqserial(dev, &sno[4],
2455                                                      scmd_id(scsicmd));
2456                                if (aac_wwn != 2)
2457                                        return aac_get_container_serial(
2458                                                scsicmd);
2459                                scsicmd->result = DID_OK << 16 |
2460                                  COMMAND_COMPLETE << 8 | SAM_STAT_GOOD;
2461                        } else {
2462                                /* vpd page not implemented */
2463                                scsicmd->result = DID_OK << 16 |
2464                                  COMMAND_COMPLETE << 8 |
2465                                  SAM_STAT_CHECK_CONDITION;
2466                                set_sense(&dev->fsa_dev[cid].sense_data,
2467                                  ILLEGAL_REQUEST, SENCODE_INVALID_CDB_FIELD,
2468                                  ASENCODE_NO_SENSE, 7, 2);
2469                                memcpy(scsicmd->sense_buffer,
2470                                  &dev->fsa_dev[cid].sense_data,
2471                                  min_t(size_t,
2472                                        sizeof(dev->fsa_dev[cid].sense_data),
2473                                        SCSI_SENSE_BUFFERSIZE));
2474                        }
2475                        scsicmd->scsi_done(scsicmd);
2476                        return 0;
2477                }
2478                inq_data.inqd_ver = 2;  /* claim compliance to SCSI-2 */
2479                inq_data.inqd_rdf = 2;  /* A response data format value of two indicates that the data shall be in the format specified in SCSI-2 */
2480                inq_data.inqd_len = 31;
2481                /*Format for "pad2" is  RelAdr | WBus32 | WBus16 |  Sync  | Linked |Reserved| CmdQue | SftRe */
2482                inq_data.inqd_pad2= 0x32 ;       /*WBus16|Sync|CmdQue */
2483                /*
2484                 *      Set the Vendor, Product, and Revision Level
2485                 *      see: <vendor>.c i.e. aac.c
2486                 */
2487                if (cid == host->this_id) {
2488                        setinqstr(dev, (void *) (inq_data.inqd_vid), ARRAY_SIZE(container_types));
2489                        inq_data.inqd_pdt = INQD_PDT_PROC;      /* Processor device */
2490                        scsi_sg_copy_from_buffer(scsicmd, &inq_data,
2491                                                 sizeof(inq_data));
2492                        scsicmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8 | SAM_STAT_GOOD;
2493                        scsicmd->scsi_done(scsicmd);
2494                        return 0;
2495                }
2496                if (dev->in_reset)
2497                        return -1;
2498                setinqstr(dev, (void *) (inq_data.inqd_vid), fsa_dev_ptr[cid].type);
2499                inq_data.inqd_pdt = INQD_PDT_DA;        /* Direct/random access device */
2500                scsi_sg_copy_from_buffer(scsicmd, &inq_data, sizeof(inq_data));
2501                return aac_get_container_name(scsicmd);
2502        }
2503        case SERVICE_ACTION_IN_16:
2504                if (!(dev->raw_io_interface) ||
2505                    !(dev->raw_io_64) ||
2506                    ((scsicmd->cmnd[1] & 0x1f) != SAI_READ_CAPACITY_16))
2507                        break;
2508        {
2509                u64 capacity;
2510                char cp[13];
2511                unsigned int alloc_len;
2512
2513                dprintk((KERN_DEBUG "READ CAPACITY_16 command.\n"));
2514                capacity = fsa_dev_ptr[cid].size - 1;
2515                cp[0] = (capacity >> 56) & 0xff;
2516                cp[1] = (capacity >> 48) & 0xff;
2517                cp[2] = (capacity >> 40) & 0xff;
2518                cp[3] = (capacity >> 32) & 0xff;
2519                cp[4] = (capacity >> 24) & 0xff;
2520                cp[5] = (capacity >> 16) & 0xff;
2521                cp[6] = (capacity >> 8) & 0xff;
2522                cp[7] = (capacity >> 0) & 0xff;
2523                cp[8] = (fsa_dev_ptr[cid].block_size >> 24) & 0xff;
2524                cp[9] = (fsa_dev_ptr[cid].block_size >> 16) & 0xff;
2525                cp[10] = (fsa_dev_ptr[cid].block_size >> 8) & 0xff;
2526                cp[11] = (fsa_dev_ptr[cid].block_size) & 0xff;
2527                cp[12] = 0;
2528
2529                alloc_len = ((scsicmd->cmnd[10] << 24)
2530                             + (scsicmd->cmnd[11] << 16)
2531                             + (scsicmd->cmnd[12] << 8) + scsicmd->cmnd[13]);
2532
2533                alloc_len = min_t(size_t, alloc_len, sizeof(cp));
2534                scsi_sg_copy_from_buffer(scsicmd, cp, alloc_len);
2535                if (alloc_len < scsi_bufflen(scsicmd))
2536                        scsi_set_resid(scsicmd,
2537                                       scsi_bufflen(scsicmd) - alloc_len);
2538
2539                /* Do not cache partition table for arrays */
2540                scsicmd->device->removable = 1;
2541
2542                scsicmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8 | SAM_STAT_GOOD;
2543                scsicmd->scsi_done(scsicmd);
2544
2545                return 0;
2546        }
2547
2548        case READ_CAPACITY:
2549        {
2550                u32 capacity;
2551                char cp[8];
2552
2553                dprintk((KERN_DEBUG "READ CAPACITY command.\n"));
2554                if (fsa_dev_ptr[cid].size <= 0x100000000ULL)
2555                        capacity = fsa_dev_ptr[cid].size - 1;
2556                else
2557                        capacity = (u32)-1;
2558
2559                cp[0] = (capacity >> 24) & 0xff;
2560                cp[1] = (capacity >> 16) & 0xff;
2561                cp[2] = (capacity >> 8) & 0xff;
2562                cp[3] = (capacity >> 0) & 0xff;
2563                cp[4] = (fsa_dev_ptr[cid].block_size >> 24) & 0xff;
2564                cp[5] = (fsa_dev_ptr[cid].block_size >> 16) & 0xff;
2565                cp[6] = (fsa_dev_ptr[cid].block_size >> 8) & 0xff;
2566                cp[7] = (fsa_dev_ptr[cid].block_size) & 0xff;
2567                scsi_sg_copy_from_buffer(scsicmd, cp, sizeof(cp));
2568                /* Do not cache partition table for arrays */
2569                scsicmd->device->removable = 1;
2570                scsicmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8 |
2571                  SAM_STAT_GOOD;
2572                scsicmd->scsi_done(scsicmd);
2573
2574                return 0;
2575        }
2576
2577        case MODE_SENSE:
2578        {
2579                int mode_buf_length = 4;
2580                u32 capacity;
2581                aac_modep_data mpd;
2582
2583                if (fsa_dev_ptr[cid].size <= 0x100000000ULL)
2584                        capacity = fsa_dev_ptr[cid].size - 1;
2585                else
2586                        capacity = (u32)-1;
2587
2588                dprintk((KERN_DEBUG "MODE SENSE command.\n"));
2589                memset((char *)&mpd, 0, sizeof(aac_modep_data));
2590
2591                /* Mode data length */
2592                mpd.hd.data_length = sizeof(mpd.hd) - 1;
2593                /* Medium type - default */
2594                mpd.hd.med_type = 0;
2595                /* Device-specific param,
2596                   bit 8: 0/1 = write enabled/protected
2597                   bit 4: 0/1 = FUA enabled */
2598                mpd.hd.dev_par = 0;
2599
2600                if (dev->raw_io_interface && ((aac_cache & 5) != 1))
2601                        mpd.hd.dev_par = 0x10;
2602                if (scsicmd->cmnd[1] & 0x8)
2603                        mpd.hd.bd_length = 0;   /* Block descriptor length */
2604                else {
2605                        mpd.hd.bd_length = sizeof(mpd.bd);
2606                        mpd.hd.data_length += mpd.hd.bd_length;
2607                        mpd.bd.block_length[0] =
2608                                (fsa_dev_ptr[cid].block_size >> 16) & 0xff;
2609                        mpd.bd.block_length[1] =
2610                                (fsa_dev_ptr[cid].block_size >> 8) &  0xff;
2611                        mpd.bd.block_length[2] =
2612                                fsa_dev_ptr[cid].block_size  & 0xff;
2613
2614                        mpd.mpc_buf[0] = scsicmd->cmnd[2];
2615                        if (scsicmd->cmnd[2] == 0x1C) {
2616                                /* page length */
2617                                mpd.mpc_buf[1] = 0xa;
2618                                /* Mode data length */
2619                                mpd.hd.data_length = 23;
2620                        } else {
2621                                /* Mode data length */
2622                                mpd.hd.data_length = 15;
2623                        }
2624
2625                        if (capacity > 0xffffff) {
2626                                mpd.bd.block_count[0] = 0xff;
2627                                mpd.bd.block_count[1] = 0xff;
2628                                mpd.bd.block_count[2] = 0xff;
2629                        } else {
2630                                mpd.bd.block_count[0] = (capacity >> 16) & 0xff;
2631                                mpd.bd.block_count[1] = (capacity >> 8) & 0xff;
2632                                mpd.bd.block_count[2] = capacity  & 0xff;
2633                        }
2634                }
2635                if (((scsicmd->cmnd[2] & 0x3f) == 8) ||
2636                  ((scsicmd->cmnd[2] & 0x3f) == 0x3f)) {
2637                        mpd.hd.data_length += 3;
2638                        mpd.mpc_buf[0] = 8;
2639                        mpd.mpc_buf[1] = 1;
2640                        mpd.mpc_buf[2] = ((aac_cache & 6) == 2)
2641                                ? 0 : 0x04; /* WCE */
2642                        mode_buf_length = sizeof(mpd);
2643                }
2644
2645                if (mode_buf_length > scsicmd->cmnd[4])
2646                        mode_buf_length = scsicmd->cmnd[4];
2647                else
2648                        mode_buf_length = sizeof(mpd);
2649                scsi_sg_copy_from_buffer(scsicmd,
2650                                         (char *)&mpd,
2651                                         mode_buf_length);
2652                scsicmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8 | SAM_STAT_GOOD;
2653                scsicmd->scsi_done(scsicmd);
2654
2655                return 0;
2656        }
2657        case MODE_SENSE_10:
2658        {
2659                u32 capacity;
2660                int mode_buf_length = 8;
2661                aac_modep10_data mpd10;
2662
2663                if (fsa_dev_ptr[cid].size <= 0x100000000ULL)
2664                        capacity = fsa_dev_ptr[cid].size - 1;
2665                else
2666                        capacity = (u32)-1;
2667
2668                dprintk((KERN_DEBUG "MODE SENSE 10 byte command.\n"));
2669                memset((char *)&mpd10, 0, sizeof(aac_modep10_data));
2670                /* Mode data length (MSB) */
2671                mpd10.hd.data_length[0] = 0;
2672                /* Mode data length (LSB) */
2673                mpd10.hd.data_length[1] = sizeof(mpd10.hd) - 1;
2674                /* Medium type - default */
2675                mpd10.hd.med_type = 0;
2676                /* Device-specific param,
2677                   bit 8: 0/1 = write enabled/protected
2678                   bit 4: 0/1 = FUA enabled */
2679                mpd10.hd.dev_par = 0;
2680
2681                if (dev->raw_io_interface && ((aac_cache & 5) != 1))
2682                        mpd10.hd.dev_par = 0x10;
2683                mpd10.hd.rsrvd[0] = 0;  /* reserved */
2684                mpd10.hd.rsrvd[1] = 0;  /* reserved */
2685                if (scsicmd->cmnd[1] & 0x8) {
2686                        /* Block descriptor length (MSB) */
2687                        mpd10.hd.bd_length[0] = 0;
2688                        /* Block descriptor length (LSB) */
2689                        mpd10.hd.bd_length[1] = 0;
2690                } else {
2691                        mpd10.hd.bd_length[0] = 0;
2692                        mpd10.hd.bd_length[1] = sizeof(mpd10.bd);
2693
2694                        mpd10.hd.data_length[1] += mpd10.hd.bd_length[1];
2695
2696                        mpd10.bd.block_length[0] =
2697                                (fsa_dev_ptr[cid].block_size >> 16) & 0xff;
2698                        mpd10.bd.block_length[1] =
2699                                (fsa_dev_ptr[cid].block_size >> 8) & 0xff;
2700                        mpd10.bd.block_length[2] =
2701                                fsa_dev_ptr[cid].block_size  & 0xff;
2702
2703                        if (capacity > 0xffffff) {
2704                                mpd10.bd.block_count[0] = 0xff;
2705                                mpd10.bd.block_count[1] = 0xff;
2706                                mpd10.bd.block_count[2] = 0xff;
2707                        } else {
2708                                mpd10.bd.block_count[0] =
2709                                        (capacity >> 16) & 0xff;
2710                                mpd10.bd.block_count[1] =
2711                                        (capacity >> 8) & 0xff;
2712                                mpd10.bd.block_count[2] =
2713                                        capacity  & 0xff;
2714                        }
2715                }
2716                if (((scsicmd->cmnd[2] & 0x3f) == 8) ||
2717                  ((scsicmd->cmnd[2] & 0x3f) == 0x3f)) {
2718                        mpd10.hd.data_length[1] += 3;
2719                        mpd10.mpc_buf[0] = 8;
2720                        mpd10.mpc_buf[1] = 1;
2721                        mpd10.mpc_buf[2] = ((aac_cache & 6) == 2)
2722                                ? 0 : 0x04; /* WCE */
2723                        mode_buf_length = sizeof(mpd10);
2724                        if (mode_buf_length > scsicmd->cmnd[8])
2725                                mode_buf_length = scsicmd->cmnd[8];
2726                }
2727                scsi_sg_copy_from_buffer(scsicmd,
2728                                         (char *)&mpd10,
2729                                         mode_buf_length);
2730
2731                scsicmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8 | SAM_STAT_GOOD;
2732                scsicmd->scsi_done(scsicmd);
2733
2734                return 0;
2735        }
2736        case REQUEST_SENSE:
2737                dprintk((KERN_DEBUG "REQUEST SENSE command.\n"));
2738                memcpy(scsicmd->sense_buffer, &dev->fsa_dev[cid].sense_data, sizeof (struct sense_data));
2739                memset(&dev->fsa_dev[cid].sense_data, 0, sizeof (struct sense_data));
2740                scsicmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8 | SAM_STAT_GOOD;
2741                scsicmd->scsi_done(scsicmd);
2742                return 0;
2743
2744        case ALLOW_MEDIUM_REMOVAL:
2745                dprintk((KERN_DEBUG "LOCK command.\n"));
2746                if (scsicmd->cmnd[4])
2747                        fsa_dev_ptr[cid].locked = 1;
2748                else
2749                        fsa_dev_ptr[cid].locked = 0;
2750
2751                scsicmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8 | SAM_STAT_GOOD;
2752                scsicmd->scsi_done(scsicmd);
2753                return 0;
2754        /*
2755         *      These commands are all No-Ops
2756         */
2757        case TEST_UNIT_READY:
2758                if (fsa_dev_ptr[cid].sense_data.sense_key == NOT_READY) {
2759                        scsicmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8 |
2760                                SAM_STAT_CHECK_CONDITION;
2761                        set_sense(&dev->fsa_dev[cid].sense_data,
2762                                  NOT_READY, SENCODE_BECOMING_READY,
2763                                  ASENCODE_BECOMING_READY, 0, 0);
2764                        memcpy(scsicmd->sense_buffer,
2765                               &dev->fsa_dev[cid].sense_data,
2766                               min_t(size_t,
2767                                     sizeof(dev->fsa_dev[cid].sense_data),
2768                                     SCSI_SENSE_BUFFERSIZE));
2769                        scsicmd->scsi_done(scsicmd);
2770                        return 0;
2771                }
2772                /* FALLTHRU */
2773        case RESERVE:
2774        case RELEASE:
2775        case REZERO_UNIT:
2776        case REASSIGN_BLOCKS:
2777        case SEEK_10:
2778                scsicmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8 | SAM_STAT_GOOD;
2779                scsicmd->scsi_done(scsicmd);
2780                return 0;
2781
2782        case START_STOP:
2783                return aac_start_stop(scsicmd);
2784        }
2785
2786        switch (scsicmd->cmnd[0])
2787        {
2788                case READ_6:
2789                case READ_10:
2790                case READ_12:
2791                case READ_16:
2792                        if (dev->in_reset)
2793                                return -1;
2794                        /*
2795                         *      Hack to keep track of ordinal number of the device that
2796                         *      corresponds to a container. Needed to convert
2797                         *      containers to /dev/sd device names
2798                         */
2799
2800                        if (scsicmd->request->rq_disk)
2801                                strlcpy(fsa_dev_ptr[cid].devname,
2802                                scsicmd->request->rq_disk->disk_name,
2803                                min(sizeof(fsa_dev_ptr[cid].devname),
2804                                sizeof(scsicmd->request->rq_disk->disk_name) + 1));
2805
2806                        return aac_read(scsicmd);
2807
2808                case WRITE_6:
2809                case WRITE_10:
2810                case WRITE_12:
2811                case WRITE_16:
2812                        if (dev->in_reset)
2813                                return -1;
2814                        return aac_write(scsicmd);
2815
2816                case SYNCHRONIZE_CACHE:
2817                        if (((aac_cache & 6) == 6) && dev->cache_protected) {
2818                                scsicmd->result = DID_OK << 16 |
2819                                        COMMAND_COMPLETE << 8 | SAM_STAT_GOOD;
2820                                scsicmd->scsi_done(scsicmd);
2821                                return 0;
2822                        }
2823                        /* Issue FIB to tell Firmware to flush it's cache */
2824                        if ((aac_cache & 6) != 2)
2825                                return aac_synchronize(scsicmd);
2826                        /* FALLTHRU */
2827                default:
2828                        /*
2829                         *      Unhandled commands
2830                         */
2831                        dprintk((KERN_WARNING "Unhandled SCSI Command: 0x%x.\n", scsicmd->cmnd[0]));
2832                        scsicmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8 | SAM_STAT_CHECK_CONDITION;
2833                        set_sense(&dev->fsa_dev[cid].sense_data,
2834                          ILLEGAL_REQUEST, SENCODE_INVALID_COMMAND,
2835                          ASENCODE_INVALID_COMMAND, 0, 0);
2836                        memcpy(scsicmd->sense_buffer, &dev->fsa_dev[cid].sense_data,
2837                                min_t(size_t,
2838                                      sizeof(dev->fsa_dev[cid].sense_data),
2839                                      SCSI_SENSE_BUFFERSIZE));
2840                        scsicmd->scsi_done(scsicmd);
2841                        return 0;
2842        }
2843}
2844
2845static int query_disk(struct aac_dev *dev, void __user *arg)
2846{
2847        struct aac_query_disk qd;
2848        struct fsa_dev_info *fsa_dev_ptr;
2849
2850        fsa_dev_ptr = dev->fsa_dev;
2851        if (!fsa_dev_ptr)
2852                return -EBUSY;
2853        if (copy_from_user(&qd, arg, sizeof (struct aac_query_disk)))
2854                return -EFAULT;
2855        if (qd.cnum == -1)
2856                qd.cnum = qd.id;
2857        else if ((qd.bus == -1) && (qd.id == -1) && (qd.lun == -1))
2858        {
2859                if (qd.cnum < 0 || qd.cnum >= dev->maximum_num_containers)
2860                        return -EINVAL;
2861                qd.instance = dev->scsi_host_ptr->host_no;
2862                qd.bus = 0;
2863                qd.id = CONTAINER_TO_ID(qd.cnum);
2864                qd.lun = CONTAINER_TO_LUN(qd.cnum);
2865        }
2866        else return -EINVAL;
2867
2868        qd.valid = fsa_dev_ptr[qd.cnum].valid != 0;
2869        qd.locked = fsa_dev_ptr[qd.cnum].locked;
2870        qd.deleted = fsa_dev_ptr[qd.cnum].deleted;
2871
2872        if (fsa_dev_ptr[qd.cnum].devname[0] == '\0')
2873                qd.unmapped = 1;
2874        else
2875                qd.unmapped = 0;
2876
2877        strlcpy(qd.name, fsa_dev_ptr[qd.cnum].devname,
2878          min(sizeof(qd.name), sizeof(fsa_dev_ptr[qd.cnum].devname) + 1));
2879
2880        if (copy_to_user(arg, &qd, sizeof (struct aac_query_disk)))
2881                return -EFAULT;
2882        return 0;
2883}
2884
2885static int force_delete_disk(struct aac_dev *dev, void __user *arg)
2886{
2887        struct aac_delete_disk dd;
2888        struct fsa_dev_info *fsa_dev_ptr;
2889
2890        fsa_dev_ptr = dev->fsa_dev;
2891        if (!fsa_dev_ptr)
2892                return -EBUSY;
2893
2894        if (copy_from_user(&dd, arg, sizeof (struct aac_delete_disk)))
2895                return -EFAULT;
2896
2897        if (dd.cnum >= dev->maximum_num_containers)
2898                return -EINVAL;
2899        /*
2900         *      Mark this container as being deleted.
2901         */
2902        fsa_dev_ptr[dd.cnum].deleted = 1;
2903        /*
2904         *      Mark the container as no longer valid
2905         */
2906        fsa_dev_ptr[dd.cnum].valid = 0;
2907        return 0;
2908}
2909
2910static int delete_disk(struct aac_dev *dev, void __user *arg)
2911{
2912        struct aac_delete_disk dd;
2913        struct fsa_dev_info *fsa_dev_ptr;
2914
2915        fsa_dev_ptr = dev->fsa_dev;
2916        if (!fsa_dev_ptr)
2917                return -EBUSY;
2918
2919        if (copy_from_user(&dd, arg, sizeof (struct aac_delete_disk)))
2920                return -EFAULT;
2921
2922        if (dd.cnum >= dev->maximum_num_containers)
2923                return -EINVAL;
2924        /*
2925         *      If the container is locked, it can not be deleted by the API.
2926         */
2927        if (fsa_dev_ptr[dd.cnum].locked)
2928                return -EBUSY;
2929        else {
2930                /*
2931                 *      Mark the container as no longer being valid.
2932                 */
2933                fsa_dev_ptr[dd.cnum].valid = 0;
2934                fsa_dev_ptr[dd.cnum].devname[0] = '\0';
2935                return 0;
2936        }
2937}
2938
2939int aac_dev_ioctl(struct aac_dev *dev, int cmd, void __user *arg)
2940{
2941        switch (cmd) {
2942        case FSACTL_QUERY_DISK:
2943                return query_disk(dev, arg);
2944        case FSACTL_DELETE_DISK:
2945                return delete_disk(dev, arg);
2946        case FSACTL_FORCE_DELETE_DISK:
2947                return force_delete_disk(dev, arg);
2948        case FSACTL_GET_CONTAINERS:
2949                return aac_get_containers(dev);
2950        default:
2951                return -ENOTTY;
2952        }
2953}
2954
2955/**
2956 *
2957 * aac_srb_callback
2958 * @context: the context set in the fib - here it is scsi cmd
2959 * @fibptr: pointer to the fib
2960 *
2961 * Handles the completion of a scsi command to a non dasd device
2962 *
2963 */
2964
2965static void aac_srb_callback(void *context, struct fib * fibptr)
2966{
2967        struct aac_dev *dev;
2968        struct aac_srb_reply *srbreply;
2969        struct scsi_cmnd *scsicmd;
2970
2971        scsicmd = (struct scsi_cmnd *) context;
2972
2973        if (!aac_valid_context(scsicmd, fibptr))
2974                return;
2975
2976        BUG_ON(fibptr == NULL);
2977        dev = fibptr->dev;
2978
2979        scsi_dma_unmap(scsicmd);
2980
2981        /* expose physical device if expose_physicald flag is on */
2982        if (scsicmd->cmnd[0] == INQUIRY && !(scsicmd->cmnd[1] & 0x01)
2983          && expose_physicals > 0)
2984                aac_expose_phy_device(scsicmd);
2985
2986        srbreply = (struct aac_srb_reply *) fib_data(fibptr);
2987        scsicmd->sense_buffer[0] = '\0';  /* Initialize sense valid flag to false */
2988
2989        if (fibptr->flags & FIB_CONTEXT_FLAG_FASTRESP) {
2990                /* fast response */
2991                srbreply->srb_status = cpu_to_le32(SRB_STATUS_SUCCESS);
2992                srbreply->scsi_status = cpu_to_le32(SAM_STAT_GOOD);
2993        } else {
2994                /*
2995                 *      Calculate resid for sg
2996                 */
2997                scsi_set_resid(scsicmd, scsi_bufflen(scsicmd)
2998                                   - le32_to_cpu(srbreply->data_xfer_length));
2999                /*
3000                 * First check the fib status
3001                 */
3002
3003                if (le32_to_cpu(srbreply->status) != ST_OK) {
3004                        int len;
3005
3006                        printk(KERN_WARNING "aac_srb_callback: srb failed, status = %d\n", le32_to_cpu(srbreply->status));
3007                        len = min_t(u32, le32_to_cpu(srbreply->sense_data_size),
3008                                    SCSI_SENSE_BUFFERSIZE);
3009                        scsicmd->result = DID_ERROR << 16
3010                                                | COMMAND_COMPLETE << 8
3011                                                | SAM_STAT_CHECK_CONDITION;
3012                        memcpy(scsicmd->sense_buffer,
3013                                        srbreply->sense_data, len);
3014                }
3015
3016                /*
3017                 * Next check the srb status
3018                 */
3019                switch ((le32_to_cpu(srbreply->srb_status))&0x3f) {
3020                case SRB_STATUS_ERROR_RECOVERY:
3021                case SRB_STATUS_PENDING:
3022                case SRB_STATUS_SUCCESS:
3023                        scsicmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8;
3024                        break;
3025                case SRB_STATUS_DATA_OVERRUN:
3026                        switch (scsicmd->cmnd[0]) {
3027                        case  READ_6:
3028                        case  WRITE_6:
3029                        case  READ_10:
3030                        case  WRITE_10:
3031                        case  READ_12:
3032                        case  WRITE_12:
3033                        case  READ_16:
3034                        case  WRITE_16:
3035                                if (le32_to_cpu(srbreply->data_xfer_length)
3036                                                        < scsicmd->underflow)
3037                                        printk(KERN_WARNING"aacraid: SCSI CMD underflow\n");
3038                                else
3039                                        printk(KERN_WARNING"aacraid: SCSI CMD Data Overrun\n");
3040                                scsicmd->result = DID_ERROR << 16
3041                                                        | COMMAND_COMPLETE << 8;
3042                                break;
3043                        case INQUIRY: {
3044                                scsicmd->result = DID_OK << 16
3045                                                        | COMMAND_COMPLETE << 8;
3046                                break;
3047                        }
3048                        default:
3049                                scsicmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8;
3050                                break;
3051                        }
3052                        break;
3053                case SRB_STATUS_ABORTED:
3054                        scsicmd->result = DID_ABORT << 16 | ABORT << 8;
3055                        break;
3056                case SRB_STATUS_ABORT_FAILED:
3057                        /*
3058                         * Not sure about this one - but assuming the
3059                         * hba was trying to abort for some reason
3060                         */
3061                        scsicmd->result = DID_ERROR << 16 | ABORT << 8;
3062                        break;
3063                case SRB_STATUS_PARITY_ERROR:
3064                        scsicmd->result = DID_PARITY << 16
3065                                                | MSG_PARITY_ERROR << 8;
3066                        break;
3067                case SRB_STATUS_NO_DEVICE:
3068                case SRB_STATUS_INVALID_PATH_ID:
3069                case SRB_STATUS_INVALID_TARGET_ID:
3070                case SRB_STATUS_INVALID_LUN:
3071                case SRB_STATUS_SELECTION_TIMEOUT:
3072                        scsicmd->result = DID_NO_CONNECT << 16
3073                                                | COMMAND_COMPLETE << 8;
3074                        break;
3075
3076                case SRB_STATUS_COMMAND_TIMEOUT:
3077                case SRB_STATUS_TIMEOUT:
3078                        scsicmd->result = DID_TIME_OUT << 16
3079                                                | COMMAND_COMPLETE << 8;
3080                        break;
3081
3082                case SRB_STATUS_BUSY:
3083                        scsicmd->result = DID_BUS_BUSY << 16
3084                                                | COMMAND_COMPLETE << 8;
3085                        break;
3086
3087                case SRB_STATUS_BUS_RESET:
3088                        scsicmd->result = DID_RESET << 16
3089                                                | COMMAND_COMPLETE << 8;
3090                        break;
3091
3092                case SRB_STATUS_MESSAGE_REJECTED:
3093                        scsicmd->result = DID_ERROR << 16
3094                                                | MESSAGE_REJECT << 8;
3095                        break;
3096                case SRB_STATUS_REQUEST_FLUSHED:
3097                case SRB_STATUS_ERROR:
3098                case SRB_STATUS_INVALID_REQUEST:
3099                case SRB_STATUS_REQUEST_SENSE_FAILED:
3100                case SRB_STATUS_NO_HBA:
3101                case SRB_STATUS_UNEXPECTED_BUS_FREE:
3102                case SRB_STATUS_PHASE_SEQUENCE_FAILURE:
3103                case SRB_STATUS_BAD_SRB_BLOCK_LENGTH:
3104                case SRB_STATUS_DELAYED_RETRY:
3105                case SRB_STATUS_BAD_FUNCTION:
3106                case SRB_STATUS_NOT_STARTED:
3107                case SRB_STATUS_NOT_IN_USE:
3108                case SRB_STATUS_FORCE_ABORT:
3109                case SRB_STATUS_DOMAIN_VALIDATION_FAIL:
3110                default:
3111#ifdef AAC_DETAILED_STATUS_INFO
3112                        printk(KERN_INFO "aacraid: SRB ERROR(%u) %s scsi cmd 0x%x - scsi status 0x%x\n",
3113                                le32_to_cpu(srbreply->srb_status) & 0x3F,
3114                                aac_get_status_string(
3115                                        le32_to_cpu(srbreply->srb_status) & 0x3F),
3116                                scsicmd->cmnd[0],
3117                                le32_to_cpu(srbreply->scsi_status));
3118#endif
3119                        if ((scsicmd->cmnd[0] == ATA_12)
3120                                || (scsicmd->cmnd[0] == ATA_16)) {
3121                                        if (scsicmd->cmnd[2] & (0x01 << 5)) {
3122                                                scsicmd->result = DID_OK << 16
3123                                                        | COMMAND_COMPLETE << 8;
3124                                break;
3125                                } else {
3126                                        scsicmd->result = DID_ERROR << 16
3127                                                | COMMAND_COMPLETE << 8;
3128                                        break;
3129                                }
3130                        } else {
3131                                scsicmd->result = DID_ERROR << 16
3132                                        | COMMAND_COMPLETE << 8;
3133                                break;
3134                        }
3135                }
3136                if (le32_to_cpu(srbreply->scsi_status)
3137                                == SAM_STAT_CHECK_CONDITION) {
3138                        int len;
3139
3140                        scsicmd->result |= SAM_STAT_CHECK_CONDITION;
3141                        len = min_t(u32, le32_to_cpu(srbreply->sense_data_size),
3142                                    SCSI_SENSE_BUFFERSIZE);
3143#ifdef AAC_DETAILED_STATUS_INFO
3144                        printk(KERN_WARNING "aac_srb_callback: check condition, status = %d len=%d\n",
3145                                                le32_to_cpu(srbreply->status), len);
3146#endif
3147                        memcpy(scsicmd->sense_buffer,
3148                                        srbreply->sense_data, len);
3149                }
3150        }
3151        /*
3152         * OR in the scsi status (already shifted up a bit)
3153         */
3154        scsicmd->result |= le32_to_cpu(srbreply->scsi_status);
3155
3156        aac_fib_complete(fibptr);
3157        scsicmd->scsi_done(scsicmd);
3158}
3159
3160/**
3161 *
3162 * aac_send_scb_fib
3163 * @scsicmd: the scsi command block
3164 *
3165 * This routine will form a FIB and fill in the aac_srb from the
3166 * scsicmd passed in.
3167 */
3168
3169static int aac_send_srb_fib(struct scsi_cmnd* scsicmd)
3170{
3171        struct fib* cmd_fibcontext;
3172        struct aac_dev* dev;
3173        int status;
3174
3175        dev = (struct aac_dev *)scsicmd->device->host->hostdata;
3176        if (scmd_id(scsicmd) >= dev->maximum_num_physicals ||
3177                        scsicmd->device->lun > 7) {
3178                scsicmd->result = DID_NO_CONNECT << 16;
3179                scsicmd->scsi_done(scsicmd);
3180                return 0;
3181        }
3182
3183        /*
3184         *      Allocate and initialize a Fib then setup a BlockWrite command
3185         */
3186        cmd_fibcontext = aac_fib_alloc_tag(dev, scsicmd);
3187        if (!cmd_fibcontext)
3188                return -1;
3189
3190        status = aac_adapter_scsi(cmd_fibcontext, scsicmd);
3191
3192        /*
3193         *      Check that the command queued to the controller
3194         */
3195        if (status == -EINPROGRESS) {
3196                scsicmd->SCp.phase = AAC_OWNER_FIRMWARE;
3197                return 0;
3198        }
3199
3200        printk(KERN_WARNING "aac_srb: aac_fib_send failed with status: %d\n", status);
3201        aac_fib_complete(cmd_fibcontext);
3202        aac_fib_free(cmd_fibcontext);
3203
3204        return -1;
3205}
3206
3207static long aac_build_sg(struct scsi_cmnd *scsicmd, struct sgmap *psg)
3208{
3209        struct aac_dev *dev;
3210        unsigned long byte_count = 0;
3211        int nseg;
3212
3213        dev = (struct aac_dev *)scsicmd->device->host->hostdata;
3214        // Get rid of old data
3215        psg->count = 0;
3216        psg->sg[0].addr = 0;
3217        psg->sg[0].count = 0;
3218
3219        nseg = scsi_dma_map(scsicmd);
3220        if (nseg < 0)
3221                return nseg;
3222        if (nseg) {
3223                struct scatterlist *sg;
3224                int i;
3225
3226                psg->count = cpu_to_le32(nseg);
3227
3228                scsi_for_each_sg(scsicmd, sg, nseg, i) {
3229                        psg->sg[i].addr = cpu_to_le32(sg_dma_address(sg));
3230                        psg->sg[i].count = cpu_to_le32(sg_dma_len(sg));
3231                        byte_count += sg_dma_len(sg);
3232                }
3233                /* hba wants the size to be exact */
3234                if (byte_count > scsi_bufflen(scsicmd)) {
3235                        u32 temp = le32_to_cpu(psg->sg[i-1].count) -
3236                                (byte_count - scsi_bufflen(scsicmd));
3237                        psg->sg[i-1].count = cpu_to_le32(temp);
3238                        byte_count = scsi_bufflen(scsicmd);
3239                }
3240                /* Check for command underflow */
3241                if(scsicmd->underflow && (byte_count < scsicmd->underflow)){
3242                        printk(KERN_WARNING"aacraid: cmd len %08lX cmd underflow %08X\n",
3243                                        byte_count, scsicmd->underflow);
3244                }
3245        }
3246        return byte_count;
3247}
3248
3249
3250static long aac_build_sg64(struct scsi_cmnd *scsicmd, struct sgmap64 *psg)
3251{
3252        struct aac_dev *dev;
3253        unsigned long byte_count = 0;
3254        u64 addr;
3255        int nseg;
3256
3257        dev = (struct aac_dev *)scsicmd->device->host->hostdata;
3258        // Get rid of old data
3259        psg->count = 0;
3260        psg->sg[0].addr[0] = 0;
3261        psg->sg[0].addr[1] = 0;
3262        psg->sg[0].count = 0;
3263
3264        nseg = scsi_dma_map(scsicmd);
3265        if (nseg < 0)
3266                return nseg;
3267        if (nseg) {
3268                struct scatterlist *sg;
3269                int i;
3270
3271                scsi_for_each_sg(scsicmd, sg, nseg, i) {
3272                        int count = sg_dma_len(sg);
3273                        addr = sg_dma_address(sg);
3274                        psg->sg[i].addr[0] = cpu_to_le32(addr & 0xffffffff);
3275                        psg->sg[i].addr[1] = cpu_to_le32(addr>>32);
3276                        psg->sg[i].count = cpu_to_le32(count);
3277                        byte_count += count;
3278                }
3279                psg->count = cpu_to_le32(nseg);
3280                /* hba wants the size to be exact */
3281                if (byte_count > scsi_bufflen(scsicmd)) {
3282                        u32 temp = le32_to_cpu(psg->sg[i-1].count) -
3283                                (byte_count - scsi_bufflen(scsicmd));
3284                        psg->sg[i-1].count = cpu_to_le32(temp);
3285                        byte_count = scsi_bufflen(scsicmd);
3286                }
3287                /* Check for command underflow */
3288                if(scsicmd->underflow && (byte_count < scsicmd->underflow)){
3289                        printk(KERN_WARNING"aacraid: cmd len %08lX cmd underflow %08X\n",
3290                                        byte_count, scsicmd->underflow);
3291                }
3292        }
3293        return byte_count;
3294}
3295
3296static long aac_build_sgraw(struct scsi_cmnd *scsicmd, struct sgmapraw *psg)
3297{
3298        unsigned long byte_count = 0;
3299        int nseg;
3300
3301        // Get rid of old data
3302        psg->count = 0;
3303        psg->sg[0].next = 0;
3304        psg->sg[0].prev = 0;
3305        psg->sg[0].addr[0] = 0;
3306        psg->sg[0].addr[1] = 0;
3307        psg->sg[0].count = 0;
3308        psg->sg[0].flags = 0;
3309
3310        nseg = scsi_dma_map(scsicmd);
3311        if (nseg < 0)
3312                return nseg;
3313        if (nseg) {
3314                struct scatterlist *sg;
3315                int i;
3316
3317                scsi_for_each_sg(scsicmd, sg, nseg, i) {
3318                        int count = sg_dma_len(sg);
3319                        u64 addr = sg_dma_address(sg);
3320                        psg->sg[i].next = 0;
3321                        psg->sg[i].prev = 0;
3322                        psg->sg[i].addr[1] = cpu_to_le32((u32)(addr>>32));
3323                        psg->sg[i].addr[0] = cpu_to_le32((u32)(addr & 0xffffffff));
3324                        psg->sg[i].count = cpu_to_le32(count);
3325                        psg->sg[i].flags = 0;
3326                        byte_count += count;
3327                }
3328                psg->count = cpu_to_le32(nseg);
3329                /* hba wants the size to be exact */
3330                if (byte_count > scsi_bufflen(scsicmd)) {
3331                        u32 temp = le32_to_cpu(psg->sg[i-1].count) -
3332                                (byte_count - scsi_bufflen(scsicmd));
3333                        psg->sg[i-1].count = cpu_to_le32(temp);
3334                        byte_count = scsi_bufflen(scsicmd);
3335                }
3336                /* Check for command underflow */
3337                if(scsicmd->underflow && (byte_count < scsicmd->underflow)){
3338                        printk(KERN_WARNING"aacraid: cmd len %08lX cmd underflow %08X\n",
3339                                        byte_count, scsicmd->underflow);
3340                }
3341        }
3342        return byte_count;
3343}
3344
3345static long aac_build_sgraw2(struct scsi_cmnd *scsicmd,
3346                                struct aac_raw_io2 *rio2, int sg_max)
3347{
3348        unsigned long byte_count = 0;
3349        int nseg;
3350
3351        nseg = scsi_dma_map(scsicmd);
3352        if (nseg < 0)
3353                return nseg;
3354        if (nseg) {
3355                struct scatterlist *sg;
3356                int i, conformable = 0;
3357                u32 min_size = PAGE_SIZE, cur_size;
3358
3359                scsi_for_each_sg(scsicmd, sg, nseg, i) {
3360                        int count = sg_dma_len(sg);
3361                        u64 addr = sg_dma_address(sg);
3362
3363                        BUG_ON(i >= sg_max);
3364                        rio2->sge[i].addrHigh = cpu_to_le32((u32)(addr>>32));
3365                        rio2->sge[i].addrLow = cpu_to_le32((u32)(addr & 0xffffffff));
3366                        cur_size = cpu_to_le32(count);
3367                        rio2->sge[i].length = cur_size;
3368                        rio2->sge[i].flags = 0;
3369                        if (i == 0) {
3370                                conformable = 1;
3371                                rio2->sgeFirstSize = cur_size;
3372                        } else if (i == 1) {
3373                                rio2->sgeNominalSize = cur_size;
3374                                min_size = cur_size;
3375                        } else if ((i+1) < nseg && cur_size != rio2->sgeNominalSize) {
3376                                conformable = 0;
3377                                if (cur_size < min_size)
3378                                        min_size = cur_size;
3379                        }
3380                        byte_count += count;
3381                }
3382
3383                /* hba wants the size to be exact */
3384                if (byte_count > scsi_bufflen(scsicmd)) {
3385                        u32 temp = le32_to_cpu(rio2->sge[i-1].length) -
3386                                (byte_count - scsi_bufflen(scsicmd));
3387                        rio2->sge[i-1].length = cpu_to_le32(temp);
3388                        byte_count = scsi_bufflen(scsicmd);
3389                }
3390
3391                rio2->sgeCnt = cpu_to_le32(nseg);
3392                rio2->flags |= cpu_to_le16(RIO2_SG_FORMAT_IEEE1212);
3393                /* not conformable: evaluate required sg elements */
3394                if (!conformable) {
3395                        int j, nseg_new = nseg, err_found;
3396                        for (i = min_size / PAGE_SIZE; i >= 1; --i) {
3397                                err_found = 0;
3398                                nseg_new = 2;
3399                                for (j = 1; j < nseg - 1; ++j) {
3400                                        if (rio2->sge[j].length % (i*PAGE_SIZE)) {
3401                                                err_found = 1;
3402                                                break;
3403                                        }
3404                                        nseg_new += (rio2->sge[j].length / (i*PAGE_SIZE));
3405                                }
3406                                if (!err_found)
3407                                        break;
3408                        }
3409                        if (i > 0 && nseg_new <= sg_max)
3410                                aac_convert_sgraw2(rio2, i, nseg, nseg_new);
3411                } else
3412                        rio2->flags |= cpu_to_le16(RIO2_SGL_CONFORMANT);
3413
3414                /* Check for command underflow */
3415                if (scsicmd->underflow && (byte_count < scsicmd->underflow)) {
3416                        printk(KERN_WARNING"aacraid: cmd len %08lX cmd underflow %08X\n",
3417                                        byte_count, scsicmd->underflow);
3418                }
3419        }
3420
3421        return byte_count;
3422}
3423
3424static int aac_convert_sgraw2(struct aac_raw_io2 *rio2, int pages, int nseg, int nseg_new)
3425{
3426        struct sge_ieee1212 *sge;
3427        int i, j, pos;
3428        u32 addr_low;
3429
3430        if (aac_convert_sgl == 0)
3431                return 0;
3432
3433        sge = kmalloc(nseg_new * sizeof(struct sge_ieee1212), GFP_ATOMIC);
3434        if (sge == NULL)
3435                return -1;
3436
3437        for (i = 1, pos = 1; i < nseg-1; ++i) {
3438                for (j = 0; j < rio2->sge[i].length / (pages * PAGE_SIZE); ++j) {
3439                        addr_low = rio2->sge[i].addrLow + j * pages * PAGE_SIZE;
3440                        sge[pos].addrLow = addr_low;
3441                        sge[pos].addrHigh = rio2->sge[i].addrHigh;
3442                        if (addr_low < rio2->sge[i].addrLow)
3443                                sge[pos].addrHigh++;
3444                        sge[pos].length = pages * PAGE_SIZE;
3445                        sge[pos].flags = 0;
3446                        pos++;
3447                }
3448        }
3449        sge[pos] = rio2->sge[nseg-1];
3450        memcpy(&rio2->sge[1], &sge[1], (nseg_new-1)*sizeof(struct sge_ieee1212));
3451
3452        kfree(sge);
3453        rio2->sgeCnt = cpu_to_le32(nseg_new);
3454        rio2->flags |= cpu_to_le16(RIO2_SGL_CONFORMANT);
3455        rio2->sgeNominalSize = pages * PAGE_SIZE;
3456        return 0;
3457}
3458
3459#ifdef AAC_DETAILED_STATUS_INFO
3460
3461struct aac_srb_status_info {
3462        u32     status;
3463        char    *str;
3464};
3465
3466
3467static struct aac_srb_status_info srb_status_info[] = {
3468        { SRB_STATUS_PENDING,           "Pending Status"},
3469        { SRB_STATUS_SUCCESS,           "Success"},
3470        { SRB_STATUS_ABORTED,           "Aborted Command"},
3471        { SRB_STATUS_ABORT_FAILED,      "Abort Failed"},
3472        { SRB_STATUS_ERROR,             "Error Event"},
3473        { SRB_STATUS_BUSY,              "Device Busy"},
3474        { SRB_STATUS_INVALID_REQUEST,   "Invalid Request"},
3475        { SRB_STATUS_INVALID_PATH_ID,   "Invalid Path ID"},
3476        { SRB_STATUS_NO_DEVICE,         "No Device"},
3477        { SRB_STATUS_TIMEOUT,           "Timeout"},
3478        { SRB_STATUS_SELECTION_TIMEOUT, "Selection Timeout"},
3479        { SRB_STATUS_COMMAND_TIMEOUT,   "Command Timeout"},
3480        { SRB_STATUS_MESSAGE_REJECTED,  "Message Rejected"},
3481        { SRB_STATUS_BUS_RESET,         "Bus Reset"},
3482        { SRB_STATUS_PARITY_ERROR,      "Parity Error"},
3483        { SRB_STATUS_REQUEST_SENSE_FAILED,"Request Sense Failed"},
3484        { SRB_STATUS_NO_HBA,            "No HBA"},
3485        { SRB_STATUS_DATA_OVERRUN,      "Data Overrun/Data Underrun"},
3486        { SRB_STATUS_UNEXPECTED_BUS_FREE,"Unexpected Bus Free"},
3487        { SRB_STATUS_PHASE_SEQUENCE_FAILURE,"Phase Error"},
3488        { SRB_STATUS_BAD_SRB_BLOCK_LENGTH,"Bad Srb Block Length"},
3489        { SRB_STATUS_REQUEST_FLUSHED,   "Request Flushed"},
3490        { SRB_STATUS_DELAYED_RETRY,     "Delayed Retry"},
3491        { SRB_STATUS_INVALID_LUN,       "Invalid LUN"},
3492        { SRB_STATUS_INVALID_TARGET_ID, "Invalid TARGET ID"},
3493        { SRB_STATUS_BAD_FUNCTION,      "Bad Function"},
3494        { SRB_STATUS_ERROR_RECOVERY,    "Error Recovery"},
3495        { SRB_STATUS_NOT_STARTED,       "Not Started"},
3496        { SRB_STATUS_NOT_IN_USE,        "Not In Use"},
3497        { SRB_STATUS_FORCE_ABORT,       "Force Abort"},
3498        { SRB_STATUS_DOMAIN_VALIDATION_FAIL,"Domain Validation Failure"},
3499        { 0xff,                         "Unknown Error"}
3500};
3501
3502char *aac_get_status_string(u32 status)
3503{
3504        int i;
3505
3506        for (i = 0; i < ARRAY_SIZE(srb_status_info); i++)
3507                if (srb_status_info[i].status == status)
3508                        return srb_status_info[i].str;
3509
3510        return "Bad Status Code";
3511}
3512
3513#endif
3514