1/************************************************************************** 2 * Initio 9100 device driver for Linux. 3 * 4 * Copyright (c) 1994-1998 Initio Corporation 5 * All rights reserved. 6 * 7 * Cleanups (c) Copyright 2007 Red Hat <alan@lxorguk.ukuu.org.uk> 8 * 9 * This program is free software; you can redistribute it and/or modify 10 * it under the terms of the GNU General Public License as published by 11 * the Free Software Foundation; either version 2, or (at your option) 12 * any later version. 13 * 14 * This program is distributed in the hope that it will be useful, 15 * but WITHOUT ANY WARRANTY; without even the implied warranty of 16 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 17 * GNU General Public License for more details. 18 * 19 * You should have received a copy of the GNU General Public License 20 * along with this program; see the file COPYING. If not, write to 21 * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. 22 * 23 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND 24 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 25 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 26 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR 27 * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 28 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 29 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 30 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 31 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 32 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 33 * SUCH DAMAGE. 34 * 35 **************************************************************************/ 36 37 38#include <linux/types.h> 39 40#define TOTAL_SG_ENTRY 32 41#define MAX_SUPPORTED_ADAPTERS 8 42#define MAX_OFFSET 15 43#define MAX_TARGETS 16 44 45typedef struct { 46 unsigned short base; 47 unsigned short vec; 48} i91u_config; 49 50/***************************************/ 51/* Tulip Configuration Register Set */ 52/***************************************/ 53#define TUL_PVID 0x00 /* Vendor ID */ 54#define TUL_PDID 0x02 /* Device ID */ 55#define TUL_PCMD 0x04 /* Command */ 56#define TUL_PSTUS 0x06 /* Status */ 57#define TUL_PRID 0x08 /* Revision number */ 58#define TUL_PPI 0x09 /* Programming interface */ 59#define TUL_PSC 0x0A /* Sub Class */ 60#define TUL_PBC 0x0B /* Base Class */ 61#define TUL_PCLS 0x0C /* Cache line size */ 62#define TUL_PLTR 0x0D /* Latency timer */ 63#define TUL_PHDT 0x0E /* Header type */ 64#define TUL_PBIST 0x0F /* BIST */ 65#define TUL_PBAD 0x10 /* Base address */ 66#define TUL_PBAD1 0x14 /* Base address */ 67#define TUL_PBAD2 0x18 /* Base address */ 68#define TUL_PBAD3 0x1C /* Base address */ 69#define TUL_PBAD4 0x20 /* Base address */ 70#define TUL_PBAD5 0x24 /* Base address */ 71#define TUL_PRSVD 0x28 /* Reserved */ 72#define TUL_PRSVD1 0x2C /* Reserved */ 73#define TUL_PRAD 0x30 /* Expansion ROM base address */ 74#define TUL_PRSVD2 0x34 /* Reserved */ 75#define TUL_PRSVD3 0x38 /* Reserved */ 76#define TUL_PINTL 0x3C /* Interrupt line */ 77#define TUL_PINTP 0x3D /* Interrupt pin */ 78#define TUL_PIGNT 0x3E /* MIN_GNT */ 79#define TUL_PMGNT 0x3F /* MAX_GNT */ 80 81/************************/ 82/* Jasmin Register Set */ 83/************************/ 84#define TUL_HACFG0 0x40 /* H/A Configuration Register 0 */ 85#define TUL_HACFG1 0x41 /* H/A Configuration Register 1 */ 86#define TUL_HACFG2 0x42 /* H/A Configuration Register 2 */ 87 88#define TUL_SDCFG0 0x44 /* SCSI Device Configuration 0 */ 89#define TUL_SDCFG1 0x45 /* SCSI Device Configuration 1 */ 90#define TUL_SDCFG2 0x46 /* SCSI Device Configuration 2 */ 91#define TUL_SDCFG3 0x47 /* SCSI Device Configuration 3 */ 92 93#define TUL_GINTS 0x50 /* Global Interrupt Status Register */ 94#define TUL_GIMSK 0x52 /* Global Interrupt MASK Register */ 95#define TUL_GCTRL 0x54 /* Global Control Register */ 96#define TUL_GCTRL_EEPROM_BIT 0x04 97#define TUL_GCTRL1 0x55 /* Global Control Register */ 98#define TUL_DMACFG 0x5B /* DMA configuration */ 99#define TUL_NVRAM 0x5D /* Non-volatile RAM port */ 100 101#define TUL_SCnt0 0x80 /* 00 R/W Transfer Counter Low */ 102#define TUL_SCnt1 0x81 /* 01 R/W Transfer Counter Mid */ 103#define TUL_SCnt2 0x82 /* 02 R/W Transfer Count High */ 104#define TUL_SFifoCnt 0x83 /* 03 R FIFO counter */ 105#define TUL_SIntEnable 0x84 /* 03 W Interrupt enble */ 106#define TUL_SInt 0x84 /* 04 R Interrupt Register */ 107#define TUL_SCtrl0 0x85 /* 05 W Control 0 */ 108#define TUL_SStatus0 0x85 /* 05 R Status 0 */ 109#define TUL_SCtrl1 0x86 /* 06 W Control 1 */ 110#define TUL_SStatus1 0x86 /* 06 R Status 1 */ 111#define TUL_SConfig 0x87 /* 07 W Configuration */ 112#define TUL_SStatus2 0x87 /* 07 R Status 2 */ 113#define TUL_SPeriod 0x88 /* 08 W Sync. Transfer Period & Offset */ 114#define TUL_SOffset 0x88 /* 08 R Offset */ 115#define TUL_SScsiId 0x89 /* 09 W SCSI ID */ 116#define TUL_SBusId 0x89 /* 09 R SCSI BUS ID */ 117#define TUL_STimeOut 0x8A /* 0A W Sel/Resel Time Out Register */ 118#define TUL_SIdent 0x8A /* 0A R Identify Message Register */ 119#define TUL_SAvail 0x8A /* 0A R Available Counter Register */ 120#define TUL_SData 0x8B /* 0B R/W SCSI data in/out */ 121#define TUL_SFifo 0x8C /* 0C R/W FIFO */ 122#define TUL_SSignal 0x90 /* 10 R/W SCSI signal in/out */ 123#define TUL_SCmd 0x91 /* 11 R/W Command */ 124#define TUL_STest0 0x92 /* 12 R/W Test0 */ 125#define TUL_STest1 0x93 /* 13 R/W Test1 */ 126#define TUL_SCFG1 0x94 /* 14 R/W Configuration */ 127 128#define TUL_XAddH 0xC0 /*DMA Transfer Physical Address */ 129#define TUL_XAddW 0xC8 /*DMA Current Transfer Physical Address */ 130#define TUL_XCntH 0xD0 /*DMA Transfer Counter */ 131#define TUL_XCntW 0xD4 /*DMA Current Transfer Counter */ 132#define TUL_XCmd 0xD8 /*DMA Command Register */ 133#define TUL_Int 0xDC /*Interrupt Register */ 134#define TUL_XStatus 0xDD /*DMA status Register */ 135#define TUL_Mask 0xE0 /*Interrupt Mask Register */ 136#define TUL_XCtrl 0xE4 /*DMA Control Register */ 137#define TUL_XCtrl1 0xE5 /*DMA Control Register 1 */ 138#define TUL_XFifo 0xE8 /*DMA FIFO */ 139 140#define TUL_WCtrl 0xF7 /*Bus master wait state control */ 141#define TUL_DCtrl 0xFB /*DMA delay control */ 142 143/*----------------------------------------------------------------------*/ 144/* bit definition for Command register of Configuration Space Header */ 145/*----------------------------------------------------------------------*/ 146#define BUSMS 0x04 /* BUS MASTER Enable */ 147#define IOSPA 0x01 /* IO Space Enable */ 148 149/*----------------------------------------------------------------------*/ 150/* Command Codes of Tulip SCSI Command register */ 151/*----------------------------------------------------------------------*/ 152#define TSC_EN_RESEL 0x80 /* Enable Reselection */ 153#define TSC_CMD_COMP 0x84 /* Command Complete Sequence */ 154#define TSC_SEL 0x01 /* Select Without ATN Sequence */ 155#define TSC_SEL_ATN 0x11 /* Select With ATN Sequence */ 156#define TSC_SEL_ATN_DMA 0x51 /* Select With ATN Sequence with DMA */ 157#define TSC_SEL_ATN3 0x31 /* Select With ATN3 Sequence */ 158#define TSC_SEL_ATNSTOP 0x12 /* Select With ATN and Stop Sequence */ 159#define TSC_SELATNSTOP 0x1E /* Select With ATN and Stop Sequence */ 160 161#define TSC_SEL_ATN_DIRECT_IN 0x95 /* Select With ATN Sequence */ 162#define TSC_SEL_ATN_DIRECT_OUT 0x15 /* Select With ATN Sequence */ 163#define TSC_SEL_ATN3_DIRECT_IN 0xB5 /* Select With ATN3 Sequence */ 164#define TSC_SEL_ATN3_DIRECT_OUT 0x35 /* Select With ATN3 Sequence */ 165#define TSC_XF_DMA_OUT_DIRECT 0x06 /* DMA Xfer Information out */ 166#define TSC_XF_DMA_IN_DIRECT 0x86 /* DMA Xfer Information in */ 167 168#define TSC_XF_DMA_OUT 0x43 /* DMA Xfer Information out */ 169#define TSC_XF_DMA_IN 0xC3 /* DMA Xfer Information in */ 170#define TSC_XF_FIFO_OUT 0x03 /* FIFO Xfer Information out */ 171#define TSC_XF_FIFO_IN 0x83 /* FIFO Xfer Information in */ 172 173#define TSC_MSG_ACCEPT 0x0F /* Message Accept */ 174 175/*----------------------------------------------------------------------*/ 176/* bit definition for Tulip SCSI Control 0 Register */ 177/*----------------------------------------------------------------------*/ 178#define TSC_RST_SEQ 0x20 /* Reset sequence counter */ 179#define TSC_FLUSH_FIFO 0x10 /* Flush FIFO */ 180#define TSC_ABT_CMD 0x04 /* Abort command (sequence) */ 181#define TSC_RST_CHIP 0x02 /* Reset SCSI Chip */ 182#define TSC_RST_BUS 0x01 /* Reset SCSI Bus */ 183 184/*----------------------------------------------------------------------*/ 185/* bit definition for Tulip SCSI Control 1 Register */ 186/*----------------------------------------------------------------------*/ 187#define TSC_EN_SCAM 0x80 /* Enable SCAM */ 188#define TSC_TIMER 0x40 /* Select timeout unit */ 189#define TSC_EN_SCSI2 0x20 /* SCSI-2 mode */ 190#define TSC_PWDN 0x10 /* Power down mode */ 191#define TSC_WIDE_CPU 0x08 /* Wide CPU */ 192#define TSC_HW_RESELECT 0x04 /* Enable HW reselect */ 193#define TSC_EN_BUS_OUT 0x02 /* Enable SCSI data bus out latch */ 194#define TSC_EN_BUS_IN 0x01 /* Enable SCSI data bus in latch */ 195 196/*----------------------------------------------------------------------*/ 197/* bit definition for Tulip SCSI Configuration Register */ 198/*----------------------------------------------------------------------*/ 199#define TSC_EN_LATCH 0x80 /* Enable phase latch */ 200#define TSC_INITIATOR 0x40 /* Initiator mode */ 201#define TSC_EN_SCSI_PAR 0x20 /* Enable SCSI parity */ 202#define TSC_DMA_8BIT 0x10 /* Alternate dma 8-bits mode */ 203#define TSC_DMA_16BIT 0x08 /* Alternate dma 16-bits mode */ 204#define TSC_EN_WDACK 0x04 /* Enable DACK while wide SCSI xfer */ 205#define TSC_ALT_PERIOD 0x02 /* Alternate sync period mode */ 206#define TSC_DIS_SCSIRST 0x01 /* Disable SCSI bus reset us */ 207 208#define TSC_INITDEFAULT (TSC_INITIATOR | TSC_EN_LATCH | TSC_ALT_PERIOD | TSC_DIS_SCSIRST) 209 210#define TSC_WIDE_SCSI 0x80 /* Enable Wide SCSI */ 211 212/*----------------------------------------------------------------------*/ 213/* bit definition for Tulip SCSI signal Register */ 214/*----------------------------------------------------------------------*/ 215#define TSC_RST_ACK 0x00 /* Release ACK signal */ 216#define TSC_RST_ATN 0x00 /* Release ATN signal */ 217#define TSC_RST_BSY 0x00 /* Release BSY signal */ 218 219#define TSC_SET_ACK 0x40 /* ACK signal */ 220#define TSC_SET_ATN 0x08 /* ATN signal */ 221 222#define TSC_REQI 0x80 /* REQ signal */ 223#define TSC_ACKI 0x40 /* ACK signal */ 224#define TSC_BSYI 0x20 /* BSY signal */ 225#define TSC_SELI 0x10 /* SEL signal */ 226#define TSC_ATNI 0x08 /* ATN signal */ 227#define TSC_MSGI 0x04 /* MSG signal */ 228#define TSC_CDI 0x02 /* C/D signal */ 229#define TSC_IOI 0x01 /* I/O signal */ 230 231 232/*----------------------------------------------------------------------*/ 233/* bit definition for Tulip SCSI Status 0 Register */ 234/*----------------------------------------------------------------------*/ 235#define TSS_INT_PENDING 0x80 /* Interrupt pending */ 236#define TSS_SEQ_ACTIVE 0x40 /* Sequencer active */ 237#define TSS_XFER_CNT 0x20 /* Transfer counter zero */ 238#define TSS_FIFO_EMPTY 0x10 /* FIFO empty */ 239#define TSS_PAR_ERROR 0x08 /* SCSI parity error */ 240#define TSS_PH_MASK 0x07 /* SCSI phase mask */ 241 242/*----------------------------------------------------------------------*/ 243/* bit definition for Tulip SCSI Status 1 Register */ 244/*----------------------------------------------------------------------*/ 245#define TSS_STATUS_RCV 0x08 /* Status received */ 246#define TSS_MSG_SEND 0x40 /* Message sent */ 247#define TSS_CMD_PH_CMP 0x20 /* command phase done */ 248#define TSS_DATA_PH_CMP 0x10 /* Data phase done */ 249#define TSS_STATUS_SEND 0x08 /* Status sent */ 250#define TSS_XFER_CMP 0x04 /* Transfer completed */ 251#define TSS_SEL_CMP 0x02 /* Selection completed */ 252#define TSS_ARB_CMP 0x01 /* Arbitration completed */ 253 254/*----------------------------------------------------------------------*/ 255/* bit definition for Tulip SCSI Status 2 Register */ 256/*----------------------------------------------------------------------*/ 257#define TSS_CMD_ABTED 0x80 /* Command aborted */ 258#define TSS_OFFSET_0 0x40 /* Offset counter zero */ 259#define TSS_FIFO_FULL 0x20 /* FIFO full */ 260#define TSS_TIMEOUT_0 0x10 /* Timeout counter zero */ 261#define TSS_BUSY_RLS 0x08 /* Busy release */ 262#define TSS_PH_MISMATCH 0x04 /* Phase mismatch */ 263#define TSS_SCSI_BUS_EN 0x02 /* SCSI data bus enable */ 264#define TSS_SCSIRST 0x01 /* SCSI bus reset in progress */ 265 266/*----------------------------------------------------------------------*/ 267/* bit definition for Tulip SCSI Interrupt Register */ 268/*----------------------------------------------------------------------*/ 269#define TSS_RESEL_INT 0x80 /* Reselected interrupt */ 270#define TSS_SEL_TIMEOUT 0x40 /* Selected/reselected timeout */ 271#define TSS_BUS_SERV 0x20 272#define TSS_SCSIRST_INT 0x10 /* SCSI bus reset detected */ 273#define TSS_DISC_INT 0x08 /* Disconnected interrupt */ 274#define TSS_SEL_INT 0x04 /* Select interrupt */ 275#define TSS_SCAM_SEL 0x02 /* SCAM selected */ 276#define TSS_FUNC_COMP 0x01 277 278/*----------------------------------------------------------------------*/ 279/* SCSI Phase Codes. */ 280/*----------------------------------------------------------------------*/ 281#define DATA_OUT 0 282#define DATA_IN 1 /* 4 */ 283#define CMD_OUT 2 284#define STATUS_IN 3 /* 6 */ 285#define MSG_OUT 6 /* 3 */ 286#define MSG_IN 7 287 288 289 290/*----------------------------------------------------------------------*/ 291/* Command Codes of Tulip xfer Command register */ 292/*----------------------------------------------------------------------*/ 293#define TAX_X_FORC 0x02 294#define TAX_X_ABT 0x04 295#define TAX_X_CLR_FIFO 0x08 296 297#define TAX_X_IN 0x21 298#define TAX_X_OUT 0x01 299#define TAX_SG_IN 0xA1 300#define TAX_SG_OUT 0x81 301 302/*----------------------------------------------------------------------*/ 303/* Tulip Interrupt Register */ 304/*----------------------------------------------------------------------*/ 305#define XCMP 0x01 306#define FCMP 0x02 307#define XABT 0x04 308#define XERR 0x08 309#define SCMP 0x10 310#define IPEND 0x80 311 312/*----------------------------------------------------------------------*/ 313/* Tulip DMA Status Register */ 314/*----------------------------------------------------------------------*/ 315#define XPEND 0x01 /* Transfer pending */ 316#define FEMPTY 0x02 /* FIFO empty */ 317 318 319 320/*----------------------------------------------------------------------*/ 321/* bit definition for TUL_GCTRL */ 322/*----------------------------------------------------------------------*/ 323#define EXTSG 0x80 324#define EXTAD 0x60 325#define SEG4K 0x08 326#define EEPRG 0x04 327#define MRMUL 0x02 328 329/*----------------------------------------------------------------------*/ 330/* bit definition for TUL_NVRAM */ 331/*----------------------------------------------------------------------*/ 332#define SE2CS 0x08 333#define SE2CLK 0x04 334#define SE2DO 0x02 335#define SE2DI 0x01 336 337 338/************************************************************************/ 339/* Scatter-Gather Element Structure */ 340/************************************************************************/ 341struct sg_entry { 342 u32 data; /* Data Pointer */ 343 u32 len; /* Data Length */ 344}; 345 346/*********************************************************************** 347 SCSI Control Block 348************************************************************************/ 349struct scsi_ctrl_blk { 350 struct scsi_ctrl_blk *next; 351 u8 status; /*4 */ 352 u8 next_state; /*5 */ 353 u8 mode; /*6 */ 354 u8 msgin; /*7 SCB_Res0 */ 355 u16 sgidx; /*8 */ 356 u16 sgmax; /*A */ 357#ifdef ALPHA 358 u32 reserved[2]; /*C */ 359#else 360 u32 reserved[3]; /*C */ 361#endif 362 363 u32 xferlen; /*18 Current xfer len */ 364 u32 totxlen; /*1C Total xfer len */ 365 u32 paddr; /*20 SCB phy. Addr. */ 366 367 u8 opcode; /*24 SCB command code */ 368 u8 flags; /*25 SCB Flags */ 369 u8 target; /*26 Target Id */ 370 u8 lun; /*27 Lun */ 371 u32 bufptr; /*28 Data Buffer Pointer */ 372 u32 buflen; /*2C Data Allocation Length */ 373 u8 sglen; /*30 SG list # */ 374 u8 senselen; /*31 Sense Allocation Length */ 375 u8 hastat; /*32 */ 376 u8 tastat; /*33 */ 377 u8 cdblen; /*34 CDB Length */ 378 u8 ident; /*35 Identify */ 379 u8 tagmsg; /*36 Tag Message */ 380 u8 tagid; /*37 Queue Tag */ 381 u8 cdb[12]; /*38 */ 382 u32 sgpaddr; /*44 SG List/Sense Buf phy. Addr. */ 383 u32 senseptr; /*48 Sense data pointer */ 384 void (*post) (u8 *, u8 *); /*4C POST routine */ 385 struct scsi_cmnd *srb; /*50 SRB Pointer */ 386 struct sg_entry sglist[TOTAL_SG_ENTRY]; /*54 Start of SG list */ 387}; 388 389/* Bit Definition for status */ 390#define SCB_RENT 0x01 391#define SCB_PEND 0x02 392#define SCB_CONTIG 0x04 /* Contingent Allegiance */ 393#define SCB_SELECT 0x08 394#define SCB_BUSY 0x10 395#define SCB_DONE 0x20 396 397 398/* Opcodes for opcode */ 399#define ExecSCSI 0x1 400#define BusDevRst 0x2 401#define AbortCmd 0x3 402 403 404/* Bit Definition for mode */ 405#define SCM_RSENS 0x01 /* request sense mode */ 406 407 408/* Bit Definition for flags */ 409#define SCF_DONE 0x01 410#define SCF_POST 0x02 411#define SCF_SENSE 0x04 412#define SCF_DIR 0x18 413#define SCF_NO_DCHK 0x00 414#define SCF_DIN 0x08 415#define SCF_DOUT 0x10 416#define SCF_NO_XF 0x18 417#define SCF_WR_VF 0x20 /* Write verify turn on */ 418#define SCF_POLL 0x40 419#define SCF_SG 0x80 420 421/* Error Codes for SCB_HaStat */ 422#define HOST_SEL_TOUT 0x11 423#define HOST_DO_DU 0x12 424#define HOST_BUS_FREE 0x13 425#define HOST_BAD_PHAS 0x14 426#define HOST_INV_CMD 0x16 427#define HOST_ABORTED 0x1A /* 07/21/98 */ 428#define HOST_SCSI_RST 0x1B 429#define HOST_DEV_RST 0x1C 430 431/* Error Codes for SCB_TaStat */ 432#define TARGET_CHKCOND 0x02 433#define TARGET_BUSY 0x08 434#define INI_QUEUE_FULL 0x28 435 436/* SCSI MESSAGE */ 437#define MSG_COMP 0x00 438#define MSG_EXTEND 0x01 439#define MSG_SDP 0x02 440#define MSG_RESTORE 0x03 441#define MSG_DISC 0x04 442#define MSG_IDE 0x05 443#define MSG_ABORT 0x06 444#define MSG_REJ 0x07 445#define MSG_NOP 0x08 446#define MSG_PARITY 0x09 447#define MSG_LINK_COMP 0x0A 448#define MSG_LINK_FLAG 0x0B 449#define MSG_DEVRST 0x0C 450#define MSG_ABORT_TAG 0x0D 451 452/* Queue tag msg: Simple_quque_tag, Head_of_queue_tag, Ordered_queue_tag */ 453#define MSG_STAG 0x20 454#define MSG_HTAG 0x21 455#define MSG_OTAG 0x22 456 457#define MSG_IGNOREWIDE 0x23 458 459#define MSG_IDENT 0x80 460 461/*********************************************************************** 462 Target Device Control Structure 463**********************************************************************/ 464 465struct target_control { 466 u16 flags; 467 u8 js_period; 468 u8 sconfig0; 469 u16 drv_flags; 470 u8 heads; 471 u8 sectors; 472}; 473 474/*********************************************************************** 475 Target Device Control Structure 476**********************************************************************/ 477 478/* Bit Definition for TCF_Flags */ 479#define TCF_SCSI_RATE 0x0007 480#define TCF_EN_DISC 0x0008 481#define TCF_NO_SYNC_NEGO 0x0010 482#define TCF_NO_WDTR 0x0020 483#define TCF_EN_255 0x0040 484#define TCF_EN_START 0x0080 485#define TCF_WDTR_DONE 0x0100 486#define TCF_SYNC_DONE 0x0200 487#define TCF_BUSY 0x0400 488 489 490/* Bit Definition for TCF_DrvFlags */ 491#define TCF_DRV_BUSY 0x01 /* Indicate target busy(driver) */ 492#define TCF_DRV_EN_TAG 0x0800 493#define TCF_DRV_255_63 0x0400 494 495/*********************************************************************** 496 Host Adapter Control Structure 497************************************************************************/ 498struct initio_host { 499 u16 addr; /* 00 */ 500 u16 bios_addr; /* 02 */ 501 u8 irq; /* 04 */ 502 u8 scsi_id; /* 05 */ 503 u8 max_tar; /* 06 */ 504 u8 num_scbs; /* 07 */ 505 506 u8 flags; /* 08 */ 507 u8 index; /* 09 */ 508 u8 ha_id; /* 0A */ 509 u8 config; /* 0B */ 510 u16 idmask; /* 0C */ 511 u8 semaph; /* 0E */ 512 u8 phase; /* 0F */ 513 u8 jsstatus0; /* 10 */ 514 u8 jsint; /* 11 */ 515 u8 jsstatus1; /* 12 */ 516 u8 sconf1; /* 13 */ 517 518 u8 msg[8]; /* 14 */ 519 struct scsi_ctrl_blk *next_avail; /* 1C */ 520 struct scsi_ctrl_blk *scb; /* 20 */ 521 struct scsi_ctrl_blk *scb_end; /* 24 */ /*UNUSED*/ 522 struct scsi_ctrl_blk *next_pending; /* 28 */ 523 struct scsi_ctrl_blk *next_contig; /* 2C */ /*UNUSED*/ 524 struct scsi_ctrl_blk *active; /* 30 */ 525 struct target_control *active_tc; /* 34 */ 526 527 struct scsi_ctrl_blk *first_avail; /* 38 */ 528 struct scsi_ctrl_blk *last_avail; /* 3C */ 529 struct scsi_ctrl_blk *first_pending; /* 40 */ 530 struct scsi_ctrl_blk *last_pending; /* 44 */ 531 struct scsi_ctrl_blk *first_busy; /* 48 */ 532 struct scsi_ctrl_blk *last_busy; /* 4C */ 533 struct scsi_ctrl_blk *first_done; /* 50 */ 534 struct scsi_ctrl_blk *last_done; /* 54 */ 535 u8 max_tags[16]; /* 58 */ 536 u8 act_tags[16]; /* 68 */ 537 struct target_control targets[MAX_TARGETS]; /* 78 */ 538 spinlock_t avail_lock; 539 spinlock_t semaph_lock; 540 struct pci_dev *pci_dev; 541}; 542 543/* Bit Definition for HCB_Config */ 544#define HCC_SCSI_RESET 0x01 545#define HCC_EN_PAR 0x02 546#define HCC_ACT_TERM1 0x04 547#define HCC_ACT_TERM2 0x08 548#define HCC_AUTO_TERM 0x10 549#define HCC_EN_PWR 0x80 550 551/* Bit Definition for HCB_Flags */ 552#define HCF_EXPECT_DISC 0x01 553#define HCF_EXPECT_SELECT 0x02 554#define HCF_EXPECT_RESET 0x10 555#define HCF_EXPECT_DONE_DISC 0x20 556 557/****************************************************************** 558 Serial EEProm 559*******************************************************************/ 560 561typedef struct _NVRAM_SCSI { /* SCSI channel configuration */ 562 u8 NVM_ChSCSIID; /* 0Ch -> Channel SCSI ID */ 563 u8 NVM_ChConfig1; /* 0Dh -> Channel config 1 */ 564 u8 NVM_ChConfig2; /* 0Eh -> Channel config 2 */ 565 u8 NVM_NumOfTarg; /* 0Fh -> Number of SCSI target */ 566 /* SCSI target configuration */ 567 u8 NVM_Targ0Config; /* 10h -> Target 0 configuration */ 568 u8 NVM_Targ1Config; /* 11h -> Target 1 configuration */ 569 u8 NVM_Targ2Config; /* 12h -> Target 2 configuration */ 570 u8 NVM_Targ3Config; /* 13h -> Target 3 configuration */ 571 u8 NVM_Targ4Config; /* 14h -> Target 4 configuration */ 572 u8 NVM_Targ5Config; /* 15h -> Target 5 configuration */ 573 u8 NVM_Targ6Config; /* 16h -> Target 6 configuration */ 574 u8 NVM_Targ7Config; /* 17h -> Target 7 configuration */ 575 u8 NVM_Targ8Config; /* 18h -> Target 8 configuration */ 576 u8 NVM_Targ9Config; /* 19h -> Target 9 configuration */ 577 u8 NVM_TargAConfig; /* 1Ah -> Target A configuration */ 578 u8 NVM_TargBConfig; /* 1Bh -> Target B configuration */ 579 u8 NVM_TargCConfig; /* 1Ch -> Target C configuration */ 580 u8 NVM_TargDConfig; /* 1Dh -> Target D configuration */ 581 u8 NVM_TargEConfig; /* 1Eh -> Target E configuration */ 582 u8 NVM_TargFConfig; /* 1Fh -> Target F configuration */ 583} NVRAM_SCSI; 584 585typedef struct _NVRAM { 586/*----------header ---------------*/ 587 u16 NVM_Signature; /* 0,1: Signature */ 588 u8 NVM_Size; /* 2: Size of data structure */ 589 u8 NVM_Revision; /* 3: Revision of data structure */ 590 /* ----Host Adapter Structure ---- */ 591 u8 NVM_ModelByte0; /* 4: Model number (byte 0) */ 592 u8 NVM_ModelByte1; /* 5: Model number (byte 1) */ 593 u8 NVM_ModelInfo; /* 6: Model information */ 594 u8 NVM_NumOfCh; /* 7: Number of SCSI channel */ 595 u8 NVM_BIOSConfig1; /* 8: BIOS configuration 1 */ 596 u8 NVM_BIOSConfig2; /* 9: BIOS configuration 2 */ 597 u8 NVM_HAConfig1; /* A: Hoat adapter configuration 1 */ 598 u8 NVM_HAConfig2; /* B: Hoat adapter configuration 2 */ 599 NVRAM_SCSI NVM_SCSIInfo[2]; 600 u8 NVM_reserved[10]; 601 /* ---------- CheckSum ---------- */ 602 u16 NVM_CheckSum; /* 0x3E, 0x3F: Checksum of NVRam */ 603} NVRAM, *PNVRAM; 604 605/* Bios Configuration for nvram->BIOSConfig1 */ 606#define NBC1_ENABLE 0x01 /* BIOS enable */ 607#define NBC1_8DRIVE 0x02 /* Support more than 2 drives */ 608#define NBC1_REMOVABLE 0x04 /* Support removable drive */ 609#define NBC1_INT19 0x08 /* Intercept int 19h */ 610#define NBC1_BIOSSCAN 0x10 /* Dynamic BIOS scan */ 611#define NBC1_LUNSUPPORT 0x40 /* Support LUN */ 612 613/* HA Configuration Byte 1 */ 614#define NHC1_BOOTIDMASK 0x0F /* Boot ID number */ 615#define NHC1_LUNMASK 0x70 /* Boot LUN number */ 616#define NHC1_CHANMASK 0x80 /* Boot Channel number */ 617 618/* Bit definition for nvram->SCSIconfig1 */ 619#define NCC1_BUSRESET 0x01 /* Reset SCSI bus at power up */ 620#define NCC1_PARITYCHK 0x02 /* SCSI parity enable */ 621#define NCC1_ACTTERM1 0x04 /* Enable active terminator 1 */ 622#define NCC1_ACTTERM2 0x08 /* Enable active terminator 2 */ 623#define NCC1_AUTOTERM 0x10 /* Enable auto terminator */ 624#define NCC1_PWRMGR 0x80 /* Enable power management */ 625 626/* Bit definition for SCSI Target configuration byte */ 627#define NTC_DISCONNECT 0x08 /* Enable SCSI disconnect */ 628#define NTC_SYNC 0x10 /* SYNC_NEGO */ 629#define NTC_NO_WDTR 0x20 /* SYNC_NEGO */ 630#define NTC_1GIGA 0x40 /* 255 head / 63 sectors (64/32) */ 631#define NTC_SPINUP 0x80 /* Start disk drive */ 632 633/* Default NVRam values */ 634#define INI_SIGNATURE 0xC925 635#define NBC1_DEFAULT (NBC1_ENABLE) 636#define NCC1_DEFAULT (NCC1_BUSRESET | NCC1_AUTOTERM | NCC1_PARITYCHK) 637#define NTC_DEFAULT (NTC_NO_WDTR | NTC_1GIGA | NTC_DISCONNECT) 638 639/* SCSI related definition */ 640#define DISC_NOT_ALLOW 0x80 /* Disconnect is not allowed */ 641#define DISC_ALLOW 0xC0 /* Disconnect is allowed */ 642#define SCSICMD_RequestSense 0x03 643 644#define SCSI_ABORT_SNOOZE 0 645#define SCSI_ABORT_SUCCESS 1 646#define SCSI_ABORT_PENDING 2 647#define SCSI_ABORT_BUSY 3 648#define SCSI_ABORT_NOT_RUNNING 4 649#define SCSI_ABORT_ERROR 5 650 651#define SCSI_RESET_SNOOZE 0 652#define SCSI_RESET_PUNT 1 653#define SCSI_RESET_SUCCESS 2 654#define SCSI_RESET_PENDING 3 655#define SCSI_RESET_WAKEUP 4 656#define SCSI_RESET_NOT_RUNNING 5 657#define SCSI_RESET_ERROR 6 658 659#define SCSI_RESET_SYNCHRONOUS 0x01 660#define SCSI_RESET_ASYNCHRONOUS 0x02 661#define SCSI_RESET_SUGGEST_BUS_RESET 0x04 662#define SCSI_RESET_SUGGEST_HOST_RESET 0x08 663 664#define SCSI_RESET_BUS_RESET 0x100 665#define SCSI_RESET_HOST_RESET 0x200 666#define SCSI_RESET_ACTION 0xff 667 668