1/* 2 * Octeon HCD hardware register definitions. 3 * 4 * This file is subject to the terms and conditions of the GNU General Public 5 * License. See the file "COPYING" in the main directory of this archive 6 * for more details. 7 * 8 * Some parts of the code were originally released under BSD license: 9 * 10 * Copyright (c) 2003-2010 Cavium Networks (support@cavium.com). All rights 11 * reserved. 12 * 13 * Redistribution and use in source and binary forms, with or without 14 * modification, are permitted provided that the following conditions are 15 * met: 16 * 17 * * Redistributions of source code must retain the above copyright 18 * notice, this list of conditions and the following disclaimer. 19 * 20 * * Redistributions in binary form must reproduce the above 21 * copyright notice, this list of conditions and the following 22 * disclaimer in the documentation and/or other materials provided 23 * with the distribution. 24 * 25 * * Neither the name of Cavium Networks nor the names of 26 * its contributors may be used to endorse or promote products 27 * derived from this software without specific prior written 28 * permission. 29 * 30 * This Software, including technical data, may be subject to U.S. export 31 * control laws, including the U.S. Export Administration Act and its associated 32 * regulations, and may be subject to export or import regulations in other 33 * countries. 34 * 35 * TO THE MAXIMUM EXTENT PERMITTED BY LAW, THE SOFTWARE IS PROVIDED "AS IS" 36 * AND WITH ALL FAULTS AND CAVIUM NETWORKS MAKES NO PROMISES, REPRESENTATIONS OR 37 * WARRANTIES, EITHER EXPRESS, IMPLIED, STATUTORY, OR OTHERWISE, WITH RESPECT TO 38 * THE SOFTWARE, INCLUDING ITS CONDITION, ITS CONFORMITY TO ANY REPRESENTATION 39 * OR DESCRIPTION, OR THE EXISTENCE OF ANY LATENT OR PATENT DEFECTS, AND CAVIUM 40 * SPECIFICALLY DISCLAIMS ALL IMPLIED (IF ANY) WARRANTIES OF TITLE, 41 * MERCHANTABILITY, NONINFRINGEMENT, FITNESS FOR A PARTICULAR PURPOSE, LACK OF 42 * VIRUSES, ACCURACY OR COMPLETENESS, QUIET ENJOYMENT, QUIET POSSESSION OR 43 * CORRESPONDENCE TO DESCRIPTION. THE ENTIRE RISK ARISING OUT OF USE OR 44 * PERFORMANCE OF THE SOFTWARE LIES WITH YOU. 45 */ 46 47#ifndef __OCTEON_HCD_H__ 48#define __OCTEON_HCD_H__ 49 50#include <asm/bitfield.h> 51 52#define CVMX_USBCXBASE 0x00016F0010000000ull 53#define CVMX_USBCXREG1(reg, bid) \ 54 (CVMX_ADD_IO_SEG(CVMX_USBCXBASE | reg) + \ 55 ((bid) & 1) * 0x100000000000ull) 56#define CVMX_USBCXREG2(reg, bid, off) \ 57 (CVMX_ADD_IO_SEG(CVMX_USBCXBASE | reg) + \ 58 (((off) & 7) + ((bid) & 1) * 0x8000000000ull) * 32) 59 60#define CVMX_USBCX_GAHBCFG(bid) CVMX_USBCXREG1(0x008, bid) 61#define CVMX_USBCX_GHWCFG3(bid) CVMX_USBCXREG1(0x04c, bid) 62#define CVMX_USBCX_GINTMSK(bid) CVMX_USBCXREG1(0x018, bid) 63#define CVMX_USBCX_GINTSTS(bid) CVMX_USBCXREG1(0x014, bid) 64#define CVMX_USBCX_GNPTXFSIZ(bid) CVMX_USBCXREG1(0x028, bid) 65#define CVMX_USBCX_GNPTXSTS(bid) CVMX_USBCXREG1(0x02c, bid) 66#define CVMX_USBCX_GOTGCTL(bid) CVMX_USBCXREG1(0x000, bid) 67#define CVMX_USBCX_GRSTCTL(bid) CVMX_USBCXREG1(0x010, bid) 68#define CVMX_USBCX_GRXFSIZ(bid) CVMX_USBCXREG1(0x024, bid) 69#define CVMX_USBCX_GRXSTSPH(bid) CVMX_USBCXREG1(0x020, bid) 70#define CVMX_USBCX_GUSBCFG(bid) CVMX_USBCXREG1(0x00c, bid) 71#define CVMX_USBCX_HAINT(bid) CVMX_USBCXREG1(0x414, bid) 72#define CVMX_USBCX_HAINTMSK(bid) CVMX_USBCXREG1(0x418, bid) 73#define CVMX_USBCX_HCCHARX(off, bid) CVMX_USBCXREG2(0x500, bid, off) 74#define CVMX_USBCX_HCFG(bid) CVMX_USBCXREG1(0x400, bid) 75#define CVMX_USBCX_HCINTMSKX(off, bid) CVMX_USBCXREG2(0x50c, bid, off) 76#define CVMX_USBCX_HCINTX(off, bid) CVMX_USBCXREG2(0x508, bid, off) 77#define CVMX_USBCX_HCSPLTX(off, bid) CVMX_USBCXREG2(0x504, bid, off) 78#define CVMX_USBCX_HCTSIZX(off, bid) CVMX_USBCXREG2(0x510, bid, off) 79#define CVMX_USBCX_HFIR(bid) CVMX_USBCXREG1(0x404, bid) 80#define CVMX_USBCX_HFNUM(bid) CVMX_USBCXREG1(0x408, bid) 81#define CVMX_USBCX_HPRT(bid) CVMX_USBCXREG1(0x440, bid) 82#define CVMX_USBCX_HPTXFSIZ(bid) CVMX_USBCXREG1(0x100, bid) 83#define CVMX_USBCX_HPTXSTS(bid) CVMX_USBCXREG1(0x410, bid) 84 85#define CVMX_USBNXBID1(bid) (((bid) & 1) * 0x10000000ull) 86#define CVMX_USBNXBID2(bid) (((bid) & 1) * 0x100000000000ull) 87 88#define CVMX_USBNXREG1(reg, bid) \ 89 (CVMX_ADD_IO_SEG(0x0001180068000000ull | reg) + CVMX_USBNXBID1(bid)) 90#define CVMX_USBNXREG2(reg, bid) \ 91 (CVMX_ADD_IO_SEG(0x00016F0000000000ull | reg) + CVMX_USBNXBID2(bid)) 92 93#define CVMX_USBNX_CLK_CTL(bid) CVMX_USBNXREG1(0x10, bid) 94#define CVMX_USBNX_DMA0_INB_CHN0(bid) CVMX_USBNXREG2(0x818, bid) 95#define CVMX_USBNX_DMA0_OUTB_CHN0(bid) CVMX_USBNXREG2(0x858, bid) 96#define CVMX_USBNX_USBP_CTL_STATUS(bid) CVMX_USBNXREG1(0x18, bid) 97 98/** 99 * cvmx_usbc#_gahbcfg 100 * 101 * Core AHB Configuration Register (GAHBCFG) 102 * 103 * This register can be used to configure the core after power-on or a change in 104 * mode of operation. This register mainly contains AHB system-related 105 * configuration parameters. The AHB is the processor interface to the O2P USB 106 * core. In general, software need not know about this interface except to 107 * program the values as specified. 108 * 109 * The application must program this register as part of the O2P USB core 110 * initialization. Do not change this register after the initial programming. 111 */ 112union cvmx_usbcx_gahbcfg { 113 u32 u32; 114 /** 115 * struct cvmx_usbcx_gahbcfg_s 116 * @ptxfemplvl: Periodic TxFIFO Empty Level (PTxFEmpLvl) 117 * Software should set this bit to 0x1. 118 * Indicates when the Periodic TxFIFO Empty Interrupt bit in the 119 * Core Interrupt register (GINTSTS.PTxFEmp) is triggered. This 120 * bit is used only in Slave mode. 121 * * 1'b0: GINTSTS.PTxFEmp interrupt indicates that the Periodic 122 * TxFIFO is half empty 123 * * 1'b1: GINTSTS.PTxFEmp interrupt indicates that the Periodic 124 * TxFIFO is completely empty 125 * @nptxfemplvl: Non-Periodic TxFIFO Empty Level (NPTxFEmpLvl) 126 * Software should set this bit to 0x1. 127 * Indicates when the Non-Periodic TxFIFO Empty Interrupt bit in 128 * the Core Interrupt register (GINTSTS.NPTxFEmp) is triggered. 129 * This bit is used only in Slave mode. 130 * * 1'b0: GINTSTS.NPTxFEmp interrupt indicates that the Non- 131 * Periodic TxFIFO is half empty 132 * * 1'b1: GINTSTS.NPTxFEmp interrupt indicates that the Non- 133 * Periodic TxFIFO is completely empty 134 * @dmaen: DMA Enable (DMAEn) 135 * * 1'b0: Core operates in Slave mode 136 * * 1'b1: Core operates in a DMA mode 137 * @hbstlen: Burst Length/Type (HBstLen) 138 * This field has not effect and should be left as 0x0. 139 * @glblintrmsk: Global Interrupt Mask (GlblIntrMsk) 140 * Software should set this field to 0x1. 141 * The application uses this bit to mask or unmask the interrupt 142 * line assertion to itself. Irrespective of this bit's setting, 143 * the interrupt status registers are updated by the core. 144 * * 1'b0: Mask the interrupt assertion to the application. 145 * * 1'b1: Unmask the interrupt assertion to the application. 146 */ 147 struct cvmx_usbcx_gahbcfg_s { 148 __BITFIELD_FIELD(u32 reserved_9_31 : 23, 149 __BITFIELD_FIELD(u32 ptxfemplvl : 1, 150 __BITFIELD_FIELD(u32 nptxfemplvl : 1, 151 __BITFIELD_FIELD(u32 reserved_6_6 : 1, 152 __BITFIELD_FIELD(u32 dmaen : 1, 153 __BITFIELD_FIELD(u32 hbstlen : 4, 154 __BITFIELD_FIELD(u32 glblintrmsk : 1, 155 ;))))))) 156 } s; 157}; 158 159/** 160 * cvmx_usbc#_ghwcfg3 161 * 162 * User HW Config3 Register (GHWCFG3) 163 * 164 * This register contains the configuration options of the O2P USB core. 165 */ 166union cvmx_usbcx_ghwcfg3 { 167 u32 u32; 168 /** 169 * struct cvmx_usbcx_ghwcfg3_s 170 * @dfifodepth: DFIFO Depth (DfifoDepth) 171 * This value is in terms of 32-bit words. 172 * * Minimum value is 32 173 * * Maximum value is 32768 174 * @ahbphysync: AHB and PHY Synchronous (AhbPhySync) 175 * Indicates whether AHB and PHY clocks are synchronous to 176 * each other. 177 * * 1'b0: No 178 * * 1'b1: Yes 179 * This bit is tied to 1. 180 * @rsttype: Reset Style for Clocked always Blocks in RTL (RstType) 181 * * 1'b0: Asynchronous reset is used in the core 182 * * 1'b1: Synchronous reset is used in the core 183 * @optfeature: Optional Features Removed (OptFeature) 184 * Indicates whether the User ID register, GPIO interface ports, 185 * and SOF toggle and counter ports were removed for gate count 186 * optimization. 187 * @vendor_control_interface_support: Vendor Control Interface Support 188 * * 1'b0: Vendor Control Interface is not available on the core. 189 * * 1'b1: Vendor Control Interface is available. 190 * @i2c_selection: I2C Selection 191 * * 1'b0: I2C Interface is not available on the core. 192 * * 1'b1: I2C Interface is available on the core. 193 * @otgen: OTG Function Enabled (OtgEn) 194 * The application uses this bit to indicate the O2P USB core's 195 * OTG capabilities. 196 * * 1'b0: Not OTG capable 197 * * 1'b1: OTG Capable 198 * @pktsizewidth: Width of Packet Size Counters (PktSizeWidth) 199 * * 3'b000: 4 bits 200 * * 3'b001: 5 bits 201 * * 3'b010: 6 bits 202 * * 3'b011: 7 bits 203 * * 3'b100: 8 bits 204 * * 3'b101: 9 bits 205 * * 3'b110: 10 bits 206 * * Others: Reserved 207 * @xfersizewidth: Width of Transfer Size Counters (XferSizeWidth) 208 * * 4'b0000: 11 bits 209 * * 4'b0001: 12 bits 210 * - ... 211 * * 4'b1000: 19 bits 212 * * Others: Reserved 213 */ 214 struct cvmx_usbcx_ghwcfg3_s { 215 __BITFIELD_FIELD(u32 dfifodepth : 16, 216 __BITFIELD_FIELD(u32 reserved_13_15 : 3, 217 __BITFIELD_FIELD(u32 ahbphysync : 1, 218 __BITFIELD_FIELD(u32 rsttype : 1, 219 __BITFIELD_FIELD(u32 optfeature : 1, 220 __BITFIELD_FIELD(u32 vendor_control_interface_support : 1, 221 __BITFIELD_FIELD(u32 i2c_selection : 1, 222 __BITFIELD_FIELD(u32 otgen : 1, 223 __BITFIELD_FIELD(u32 pktsizewidth : 3, 224 __BITFIELD_FIELD(u32 xfersizewidth : 4, 225 ;)))))))))) 226 } s; 227}; 228 229/** 230 * cvmx_usbc#_gintmsk 231 * 232 * Core Interrupt Mask Register (GINTMSK) 233 * 234 * This register works with the Core Interrupt register to interrupt the 235 * application. When an interrupt bit is masked, the interrupt associated with 236 * that bit will not be generated. However, the Core Interrupt (GINTSTS) 237 * register bit corresponding to that interrupt will still be set. 238 * Mask interrupt: 1'b0, Unmask interrupt: 1'b1 239 */ 240union cvmx_usbcx_gintmsk { 241 u32 u32; 242 /** 243 * struct cvmx_usbcx_gintmsk_s 244 * @wkupintmsk: Resume/Remote Wakeup Detected Interrupt Mask 245 * (WkUpIntMsk) 246 * @sessreqintmsk: Session Request/New Session Detected Interrupt Mask 247 * (SessReqIntMsk) 248 * @disconnintmsk: Disconnect Detected Interrupt Mask (DisconnIntMsk) 249 * @conidstschngmsk: Connector ID Status Change Mask (ConIDStsChngMsk) 250 * @ptxfempmsk: Periodic TxFIFO Empty Mask (PTxFEmpMsk) 251 * @hchintmsk: Host Channels Interrupt Mask (HChIntMsk) 252 * @prtintmsk: Host Port Interrupt Mask (PrtIntMsk) 253 * @fetsuspmsk: Data Fetch Suspended Mask (FetSuspMsk) 254 * @incomplpmsk: Incomplete Periodic Transfer Mask (incomplPMsk) 255 * Incomplete Isochronous OUT Transfer Mask 256 * (incompISOOUTMsk) 257 * @incompisoinmsk: Incomplete Isochronous IN Transfer Mask 258 * (incompISOINMsk) 259 * @oepintmsk: OUT Endpoints Interrupt Mask (OEPIntMsk) 260 * @inepintmsk: IN Endpoints Interrupt Mask (INEPIntMsk) 261 * @epmismsk: Endpoint Mismatch Interrupt Mask (EPMisMsk) 262 * @eopfmsk: End of Periodic Frame Interrupt Mask (EOPFMsk) 263 * @isooutdropmsk: Isochronous OUT Packet Dropped Interrupt Mask 264 * (ISOOutDropMsk) 265 * @enumdonemsk: Enumeration Done Mask (EnumDoneMsk) 266 * @usbrstmsk: USB Reset Mask (USBRstMsk) 267 * @usbsuspmsk: USB Suspend Mask (USBSuspMsk) 268 * @erlysuspmsk: Early Suspend Mask (ErlySuspMsk) 269 * @i2cint: I2C Interrupt Mask (I2CINT) 270 * @ulpickintmsk: ULPI Carkit Interrupt Mask (ULPICKINTMsk) 271 * I2C Carkit Interrupt Mask (I2CCKINTMsk) 272 * @goutnakeffmsk: Global OUT NAK Effective Mask (GOUTNakEffMsk) 273 * @ginnakeffmsk: Global Non-Periodic IN NAK Effective Mask 274 * (GINNakEffMsk) 275 * @nptxfempmsk: Non-Periodic TxFIFO Empty Mask (NPTxFEmpMsk) 276 * @rxflvlmsk: Receive FIFO Non-Empty Mask (RxFLvlMsk) 277 * @sofmsk: Start of (micro)Frame Mask (SofMsk) 278 * @otgintmsk: OTG Interrupt Mask (OTGIntMsk) 279 * @modemismsk: Mode Mismatch Interrupt Mask (ModeMisMsk) 280 */ 281 struct cvmx_usbcx_gintmsk_s { 282 __BITFIELD_FIELD(u32 wkupintmsk : 1, 283 __BITFIELD_FIELD(u32 sessreqintmsk : 1, 284 __BITFIELD_FIELD(u32 disconnintmsk : 1, 285 __BITFIELD_FIELD(u32 conidstschngmsk : 1, 286 __BITFIELD_FIELD(u32 reserved_27_27 : 1, 287 __BITFIELD_FIELD(u32 ptxfempmsk : 1, 288 __BITFIELD_FIELD(u32 hchintmsk : 1, 289 __BITFIELD_FIELD(u32 prtintmsk : 1, 290 __BITFIELD_FIELD(u32 reserved_23_23 : 1, 291 __BITFIELD_FIELD(u32 fetsuspmsk : 1, 292 __BITFIELD_FIELD(u32 incomplpmsk : 1, 293 __BITFIELD_FIELD(u32 incompisoinmsk : 1, 294 __BITFIELD_FIELD(u32 oepintmsk : 1, 295 __BITFIELD_FIELD(u32 inepintmsk : 1, 296 __BITFIELD_FIELD(u32 epmismsk : 1, 297 __BITFIELD_FIELD(u32 reserved_16_16 : 1, 298 __BITFIELD_FIELD(u32 eopfmsk : 1, 299 __BITFIELD_FIELD(u32 isooutdropmsk : 1, 300 __BITFIELD_FIELD(u32 enumdonemsk : 1, 301 __BITFIELD_FIELD(u32 usbrstmsk : 1, 302 __BITFIELD_FIELD(u32 usbsuspmsk : 1, 303 __BITFIELD_FIELD(u32 erlysuspmsk : 1, 304 __BITFIELD_FIELD(u32 i2cint : 1, 305 __BITFIELD_FIELD(u32 ulpickintmsk : 1, 306 __BITFIELD_FIELD(u32 goutnakeffmsk : 1, 307 __BITFIELD_FIELD(u32 ginnakeffmsk : 1, 308 __BITFIELD_FIELD(u32 nptxfempmsk : 1, 309 __BITFIELD_FIELD(u32 rxflvlmsk : 1, 310 __BITFIELD_FIELD(u32 sofmsk : 1, 311 __BITFIELD_FIELD(u32 otgintmsk : 1, 312 __BITFIELD_FIELD(u32 modemismsk : 1, 313 __BITFIELD_FIELD(u32 reserved_0_0 : 1, 314 ;)))))))))))))))))))))))))))))))) 315 } s; 316}; 317 318/** 319 * cvmx_usbc#_gintsts 320 * 321 * Core Interrupt Register (GINTSTS) 322 * 323 * This register interrupts the application for system-level events in the 324 * current mode of operation (Device mode or Host mode). It is shown in 325 * Interrupt. Some of the bits in this register are valid only in Host mode, 326 * while others are valid in Device mode only. This register also indicates the 327 * current mode of operation. In order to clear the interrupt status bits of 328 * type R_SS_WC, the application must write 1'b1 into the bit. The FIFO status 329 * interrupts are read only; once software reads from or writes to the FIFO 330 * while servicing these interrupts, FIFO interrupt conditions are cleared 331 * automatically. 332 */ 333union cvmx_usbcx_gintsts { 334 u32 u32; 335 /** 336 * struct cvmx_usbcx_gintsts_s 337 * @wkupint: Resume/Remote Wakeup Detected Interrupt (WkUpInt) 338 * In Device mode, this interrupt is asserted when a resume is 339 * detected on the USB. In Host mode, this interrupt is asserted 340 * when a remote wakeup is detected on the USB. 341 * For more information on how to use this interrupt, see "Partial 342 * Power-Down and Clock Gating Programming Model" on 343 * page 353. 344 * @sessreqint: Session Request/New Session Detected Interrupt 345 * (SessReqInt) 346 * In Host mode, this interrupt is asserted when a session request 347 * is detected from the device. In Device mode, this interrupt is 348 * asserted when the utmiotg_bvalid signal goes high. 349 * For more information on how to use this interrupt, see "Partial 350 * Power-Down and Clock Gating Programming Model" on 351 * page 353. 352 * @disconnint: Disconnect Detected Interrupt (DisconnInt) 353 * Asserted when a device disconnect is detected. 354 * @conidstschng: Connector ID Status Change (ConIDStsChng) 355 * The core sets this bit when there is a change in connector ID 356 * status. 357 * @ptxfemp: Periodic TxFIFO Empty (PTxFEmp) 358 * Asserted when the Periodic Transmit FIFO is either half or 359 * completely empty and there is space for at least one entry to be 360 * written in the Periodic Request Queue. The half or completely 361 * empty status is determined by the Periodic TxFIFO Empty Level 362 * bit in the Core AHB Configuration register 363 * (GAHBCFG.PTxFEmpLvl). 364 * @hchint: Host Channels Interrupt (HChInt) 365 * The core sets this bit to indicate that an interrupt is pending 366 * on one of the channels of the core (in Host mode). The 367 * application must read the Host All Channels Interrupt (HAINT) 368 * register to determine the exact number of the channel on which 369 * the interrupt occurred, and then read the corresponding Host 370 * Channel-n Interrupt (HCINTn) register to determine the exact 371 * cause of the interrupt. The application must clear the 372 * appropriate status bit in the HCINTn register to clear this bit. 373 * @prtint: Host Port Interrupt (PrtInt) 374 * The core sets this bit to indicate a change in port status of 375 * one of the O2P USB core ports in Host mode. The application must 376 * read the Host Port Control and Status (HPRT) register to 377 * determine the exact event that caused this interrupt. The 378 * application must clear the appropriate status bit in the Host 379 * Port Control and Status register to clear this bit. 380 * @fetsusp: Data Fetch Suspended (FetSusp) 381 * This interrupt is valid only in DMA mode. This interrupt 382 * indicates that the core has stopped fetching data for IN 383 * endpoints due to the unavailability of TxFIFO space or Request 384 * Queue space. This interrupt is used by the application for an 385 * endpoint mismatch algorithm. 386 * @incomplp: Incomplete Periodic Transfer (incomplP) 387 * In Host mode, the core sets this interrupt bit when there are 388 * incomplete periodic transactions still pending which are 389 * scheduled for the current microframe. 390 * Incomplete Isochronous OUT Transfer (incompISOOUT) 391 * The Device mode, the core sets this interrupt to indicate that 392 * there is at least one isochronous OUT endpoint on which the 393 * transfer is not completed in the current microframe. This 394 * interrupt is asserted along with the End of Periodic Frame 395 * Interrupt (EOPF) bit in this register. 396 * @incompisoin: Incomplete Isochronous IN Transfer (incompISOIN) 397 * The core sets this interrupt to indicate that there is at least 398 * one isochronous IN endpoint on which the transfer is not 399 * completed in the current microframe. This interrupt is asserted 400 * along with the End of Periodic Frame Interrupt (EOPF) bit in 401 * this register. 402 * @oepint: OUT Endpoints Interrupt (OEPInt) 403 * The core sets this bit to indicate that an interrupt is pending 404 * on one of the OUT endpoints of the core (in Device mode). The 405 * application must read the Device All Endpoints Interrupt 406 * (DAINT) register to determine the exact number of the OUT 407 * endpoint on which the interrupt occurred, and then read the 408 * corresponding Device OUT Endpoint-n Interrupt (DOEPINTn) 409 * register to determine the exact cause of the interrupt. The 410 * application must clear the appropriate status bit in the 411 * corresponding DOEPINTn register to clear this bit. 412 * @iepint: IN Endpoints Interrupt (IEPInt) 413 * The core sets this bit to indicate that an interrupt is pending 414 * on one of the IN endpoints of the core (in Device mode). The 415 * application must read the Device All Endpoints Interrupt 416 * (DAINT) register to determine the exact number of the IN 417 * endpoint on which the interrupt occurred, and then read the 418 * corresponding Device IN Endpoint-n Interrupt (DIEPINTn) 419 * register to determine the exact cause of the interrupt. The 420 * application must clear the appropriate status bit in the 421 * corresponding DIEPINTn register to clear this bit. 422 * @epmis: Endpoint Mismatch Interrupt (EPMis) 423 * Indicates that an IN token has been received for a non-periodic 424 * endpoint, but the data for another endpoint is present in the 425 * top of the Non-Periodic Transmit FIFO and the IN endpoint 426 * mismatch count programmed by the application has expired. 427 * @eopf: End of Periodic Frame Interrupt (EOPF) 428 * Indicates that the period specified in the Periodic Frame 429 * Interval field of the Device Configuration register 430 * (DCFG.PerFrInt) has been reached in the current microframe. 431 * @isooutdrop: Isochronous OUT Packet Dropped Interrupt (ISOOutDrop) 432 * The core sets this bit when it fails to write an isochronous OUT 433 * packet into the RxFIFO because the RxFIFO doesn't have 434 * enough space to accommodate a maximum packet size packet 435 * for the isochronous OUT endpoint. 436 * @enumdone: Enumeration Done (EnumDone) 437 * The core sets this bit to indicate that speed enumeration is 438 * complete. The application must read the Device Status (DSTS) 439 * register to obtain the enumerated speed. 440 * @usbrst: USB Reset (USBRst) 441 * The core sets this bit to indicate that a reset is detected on 442 * the USB. 443 * @usbsusp: USB Suspend (USBSusp) 444 * The core sets this bit to indicate that a suspend was detected 445 * on the USB. The core enters the Suspended state when there 446 * is no activity on the phy_line_state_i signal for an extended 447 * period of time. 448 * @erlysusp: Early Suspend (ErlySusp) 449 * The core sets this bit to indicate that an Idle state has been 450 * detected on the USB for 3 ms. 451 * @i2cint: I2C Interrupt (I2CINT) 452 * This bit is always 0x0. 453 * @ulpickint: ULPI Carkit Interrupt (ULPICKINT) 454 * This bit is always 0x0. 455 * @goutnakeff: Global OUT NAK Effective (GOUTNakEff) 456 * Indicates that the Set Global OUT NAK bit in the Device Control 457 * register (DCTL.SGOUTNak), set by the application, has taken 458 * effect in the core. This bit can be cleared by writing the Clear 459 * Global OUT NAK bit in the Device Control register 460 * (DCTL.CGOUTNak). 461 * @ginnakeff: Global IN Non-Periodic NAK Effective (GINNakEff) 462 * Indicates that the Set Global Non-Periodic IN NAK bit in the 463 * Device Control register (DCTL.SGNPInNak), set by the 464 * application, has taken effect in the core. That is, the core has 465 * sampled the Global IN NAK bit set by the application. This bit 466 * can be cleared by clearing the Clear Global Non-Periodic IN 467 * NAK bit in the Device Control register (DCTL.CGNPInNak). 468 * This interrupt does not necessarily mean that a NAK handshake 469 * is sent out on the USB. The STALL bit takes precedence over 470 * the NAK bit. 471 * @nptxfemp: Non-Periodic TxFIFO Empty (NPTxFEmp) 472 * This interrupt is asserted when the Non-Periodic TxFIFO is 473 * either half or completely empty, and there is space for at least 474 * one entry to be written to the Non-Periodic Transmit Request 475 * Queue. The half or completely empty status is determined by 476 * the Non-Periodic TxFIFO Empty Level bit in the Core AHB 477 * Configuration register (GAHBCFG.NPTxFEmpLvl). 478 * @rxflvl: RxFIFO Non-Empty (RxFLvl) 479 * Indicates that there is at least one packet pending to be read 480 * from the RxFIFO. 481 * @sof: Start of (micro)Frame (Sof) 482 * In Host mode, the core sets this bit to indicate that an SOF 483 * (FS), micro-SOF (HS), or Keep-Alive (LS) is transmitted on the 484 * USB. The application must write a 1 to this bit to clear the 485 * interrupt. 486 * In Device mode, in the core sets this bit to indicate that an 487 * SOF token has been received on the USB. The application can read 488 * the Device Status register to get the current (micro)frame 489 * number. This interrupt is seen only when the core is operating 490 * at either HS or FS. 491 * @otgint: OTG Interrupt (OTGInt) 492 * The core sets this bit to indicate an OTG protocol event. The 493 * application must read the OTG Interrupt Status (GOTGINT) 494 * register to determine the exact event that caused this 495 * interrupt. The application must clear the appropriate status bit 496 * in the GOTGINT register to clear this bit. 497 * @modemis: Mode Mismatch Interrupt (ModeMis) 498 * The core sets this bit when the application is trying to access: 499 * * A Host mode register, when the core is operating in Device 500 * mode 501 * * A Device mode register, when the core is operating in Host 502 * mode 503 * The register access is completed on the AHB with an OKAY 504 * response, but is ignored by the core internally and doesn't 505 * affect the operation of the core. 506 * @curmod: Current Mode of Operation (CurMod) 507 * Indicates the current mode of operation. 508 * * 1'b0: Device mode 509 * * 1'b1: Host mode 510 */ 511 struct cvmx_usbcx_gintsts_s { 512 __BITFIELD_FIELD(u32 wkupint : 1, 513 __BITFIELD_FIELD(u32 sessreqint : 1, 514 __BITFIELD_FIELD(u32 disconnint : 1, 515 __BITFIELD_FIELD(u32 conidstschng : 1, 516 __BITFIELD_FIELD(u32 reserved_27_27 : 1, 517 __BITFIELD_FIELD(u32 ptxfemp : 1, 518 __BITFIELD_FIELD(u32 hchint : 1, 519 __BITFIELD_FIELD(u32 prtint : 1, 520 __BITFIELD_FIELD(u32 reserved_23_23 : 1, 521 __BITFIELD_FIELD(u32 fetsusp : 1, 522 __BITFIELD_FIELD(u32 incomplp : 1, 523 __BITFIELD_FIELD(u32 incompisoin : 1, 524 __BITFIELD_FIELD(u32 oepint : 1, 525 __BITFIELD_FIELD(u32 iepint : 1, 526 __BITFIELD_FIELD(u32 epmis : 1, 527 __BITFIELD_FIELD(u32 reserved_16_16 : 1, 528 __BITFIELD_FIELD(u32 eopf : 1, 529 __BITFIELD_FIELD(u32 isooutdrop : 1, 530 __BITFIELD_FIELD(u32 enumdone : 1, 531 __BITFIELD_FIELD(u32 usbrst : 1, 532 __BITFIELD_FIELD(u32 usbsusp : 1, 533 __BITFIELD_FIELD(u32 erlysusp : 1, 534 __BITFIELD_FIELD(u32 i2cint : 1, 535 __BITFIELD_FIELD(u32 ulpickint : 1, 536 __BITFIELD_FIELD(u32 goutnakeff : 1, 537 __BITFIELD_FIELD(u32 ginnakeff : 1, 538 __BITFIELD_FIELD(u32 nptxfemp : 1, 539 __BITFIELD_FIELD(u32 rxflvl : 1, 540 __BITFIELD_FIELD(u32 sof : 1, 541 __BITFIELD_FIELD(u32 otgint : 1, 542 __BITFIELD_FIELD(u32 modemis : 1, 543 __BITFIELD_FIELD(u32 curmod : 1, 544 ;)))))))))))))))))))))))))))))))) 545 } s; 546}; 547 548/** 549 * cvmx_usbc#_gnptxfsiz 550 * 551 * Non-Periodic Transmit FIFO Size Register (GNPTXFSIZ) 552 * 553 * The application can program the RAM size and the memory start address for the 554 * Non-Periodic TxFIFO. 555 */ 556union cvmx_usbcx_gnptxfsiz { 557 u32 u32; 558 /** 559 * struct cvmx_usbcx_gnptxfsiz_s 560 * @nptxfdep: Non-Periodic TxFIFO Depth (NPTxFDep) 561 * This value is in terms of 32-bit words. 562 * Minimum value is 16 563 * Maximum value is 32768 564 * @nptxfstaddr: Non-Periodic Transmit RAM Start Address (NPTxFStAddr) 565 * This field contains the memory start address for Non-Periodic 566 * Transmit FIFO RAM. 567 */ 568 struct cvmx_usbcx_gnptxfsiz_s { 569 __BITFIELD_FIELD(u32 nptxfdep : 16, 570 __BITFIELD_FIELD(u32 nptxfstaddr : 16, 571 ;)) 572 } s; 573}; 574 575/** 576 * cvmx_usbc#_gnptxsts 577 * 578 * Non-Periodic Transmit FIFO/Queue Status Register (GNPTXSTS) 579 * 580 * This read-only register contains the free space information for the 581 * Non-Periodic TxFIFO and the Non-Periodic Transmit Request Queue. 582 */ 583union cvmx_usbcx_gnptxsts { 584 u32 u32; 585 /** 586 * struct cvmx_usbcx_gnptxsts_s 587 * @nptxqtop: Top of the Non-Periodic Transmit Request Queue (NPTxQTop) 588 * Entry in the Non-Periodic Tx Request Queue that is currently 589 * being processed by the MAC. 590 * * Bits [30:27]: Channel/endpoint number 591 * * Bits [26:25]: 592 * - 2'b00: IN/OUT token 593 * - 2'b01: Zero-length transmit packet (device IN/host OUT) 594 * - 2'b10: PING/CSPLIT token 595 * - 2'b11: Channel halt command 596 * * Bit [24]: Terminate (last entry for selected channel/endpoint) 597 * @nptxqspcavail: Non-Periodic Transmit Request Queue Space Available 598 * (NPTxQSpcAvail) 599 * Indicates the amount of free space available in the Non- 600 * Periodic Transmit Request Queue. This queue holds both IN 601 * and OUT requests in Host mode. Device mode has only IN 602 * requests. 603 * * 8'h0: Non-Periodic Transmit Request Queue is full 604 * * 8'h1: 1 location available 605 * * 8'h2: 2 locations available 606 * * n: n locations available (0..8) 607 * * Others: Reserved 608 * @nptxfspcavail: Non-Periodic TxFIFO Space Avail (NPTxFSpcAvail) 609 * Indicates the amount of free space available in the Non- 610 * Periodic TxFIFO. 611 * Values are in terms of 32-bit words. 612 * * 16'h0: Non-Periodic TxFIFO is full 613 * * 16'h1: 1 word available 614 * * 16'h2: 2 words available 615 * * 16'hn: n words available (where 0..32768) 616 * * 16'h8000: 32768 words available 617 * * Others: Reserved 618 */ 619 struct cvmx_usbcx_gnptxsts_s { 620 __BITFIELD_FIELD(u32 reserved_31_31 : 1, 621 __BITFIELD_FIELD(u32 nptxqtop : 7, 622 __BITFIELD_FIELD(u32 nptxqspcavail : 8, 623 __BITFIELD_FIELD(u32 nptxfspcavail : 16, 624 ;)))) 625 } s; 626}; 627 628/** 629 * cvmx_usbc#_grstctl 630 * 631 * Core Reset Register (GRSTCTL) 632 * 633 * The application uses this register to reset various hardware features inside 634 * the core. 635 */ 636union cvmx_usbcx_grstctl { 637 u32 u32; 638 /** 639 * struct cvmx_usbcx_grstctl_s 640 * @ahbidle: AHB Master Idle (AHBIdle) 641 * Indicates that the AHB Master State Machine is in the IDLE 642 * condition. 643 * @dmareq: DMA Request Signal (DMAReq) 644 * Indicates that the DMA request is in progress. Used for debug. 645 * @txfnum: TxFIFO Number (TxFNum) 646 * This is the FIFO number that must be flushed using the TxFIFO 647 * Flush bit. This field must not be changed until the core clears 648 * the TxFIFO Flush bit. 649 * * 5'h0: Non-Periodic TxFIFO flush 650 * * 5'h1: Periodic TxFIFO 1 flush in Device mode or Periodic 651 * TxFIFO flush in Host mode 652 * * 5'h2: Periodic TxFIFO 2 flush in Device mode 653 * - ... 654 * * 5'hF: Periodic TxFIFO 15 flush in Device mode 655 * * 5'h10: Flush all the Periodic and Non-Periodic TxFIFOs in the 656 * core 657 * @txfflsh: TxFIFO Flush (TxFFlsh) 658 * This bit selectively flushes a single or all transmit FIFOs, but 659 * cannot do so if the core is in the midst of a transaction. 660 * The application must only write this bit after checking that the 661 * core is neither writing to the TxFIFO nor reading from the 662 * TxFIFO. 663 * The application must wait until the core clears this bit before 664 * performing any operations. This bit takes 8 clocks (of phy_clk 665 * or hclk, whichever is slower) to clear. 666 * @rxfflsh: RxFIFO Flush (RxFFlsh) 667 * The application can flush the entire RxFIFO using this bit, but 668 * must first ensure that the core is not in the middle of a 669 * transaction. 670 * The application must only write to this bit after checking that 671 * the core is neither reading from the RxFIFO nor writing to the 672 * RxFIFO. 673 * The application must wait until the bit is cleared before 674 * performing any other operations. This bit will take 8 clocks 675 * (slowest of PHY or AHB clock) to clear. 676 * @intknqflsh: IN Token Sequence Learning Queue Flush (INTknQFlsh) 677 * The application writes this bit to flush the IN Token Sequence 678 * Learning Queue. 679 * @frmcntrrst: Host Frame Counter Reset (FrmCntrRst) 680 * The application writes this bit to reset the (micro)frame number 681 * counter inside the core. When the (micro)frame counter is reset, 682 * the subsequent SOF sent out by the core will have a 683 * (micro)frame number of 0. 684 * @hsftrst: HClk Soft Reset (HSftRst) 685 * The application uses this bit to flush the control logic in the 686 * AHB Clock domain. Only AHB Clock Domain pipelines are reset. 687 * * FIFOs are not flushed with this bit. 688 * * All state machines in the AHB clock domain are reset to the 689 * Idle state after terminating the transactions on the AHB, 690 * following the protocol. 691 * * CSR control bits used by the AHB clock domain state 692 * machines are cleared. 693 * * To clear this interrupt, status mask bits that control the 694 * interrupt status and are generated by the AHB clock domain 695 * state machine are cleared. 696 * * Because interrupt status bits are not cleared, the application 697 * can get the status of any core events that occurred after it set 698 * this bit. 699 * This is a self-clearing bit that the core clears after all 700 * necessary logic is reset in the core. This may take several 701 * clocks, depending on the core's current state. 702 * @csftrst: Core Soft Reset (CSftRst) 703 * Resets the hclk and phy_clock domains as follows: 704 * * Clears the interrupts and all the CSR registers except the 705 * following register bits: 706 * - PCGCCTL.RstPdwnModule 707 * - PCGCCTL.GateHclk 708 * - PCGCCTL.PwrClmp 709 * - PCGCCTL.StopPPhyLPwrClkSelclk 710 * - GUSBCFG.PhyLPwrClkSel 711 * - GUSBCFG.DDRSel 712 * - GUSBCFG.PHYSel 713 * - GUSBCFG.FSIntf 714 * - GUSBCFG.ULPI_UTMI_Sel 715 * - GUSBCFG.PHYIf 716 * - HCFG.FSLSPclkSel 717 * - DCFG.DevSpd 718 * * All module state machines (except the AHB Slave Unit) are 719 * reset to the IDLE state, and all the transmit FIFOs and the 720 * receive FIFO are flushed. 721 * * Any transactions on the AHB Master are terminated as soon 722 * as possible, after gracefully completing the last data phase of 723 * an AHB transfer. Any transactions on the USB are terminated 724 * immediately. 725 * The application can write to this bit any time it wants to reset 726 * the core. This is a self-clearing bit and the core clears this 727 * bit after all the necessary logic is reset in the core, which 728 * may take several clocks, depending on the current state of the 729 * core. Once this bit is cleared software should wait at least 3 730 * PHY clocks before doing any access to the PHY domain 731 * (synchronization delay). Software should also should check that 732 * bit 31 of this register is 1 (AHB Master is IDLE) before 733 * starting any operation. 734 * Typically software reset is used during software development 735 * and also when you dynamically change the PHY selection bits 736 * in the USB configuration registers listed above. When you 737 * change the PHY, the corresponding clock for the PHY is 738 * selected and used in the PHY domain. Once a new clock is 739 * selected, the PHY domain has to be reset for proper operation. 740 */ 741 struct cvmx_usbcx_grstctl_s { 742 __BITFIELD_FIELD(u32 ahbidle : 1, 743 __BITFIELD_FIELD(u32 dmareq : 1, 744 __BITFIELD_FIELD(u32 reserved_11_29 : 19, 745 __BITFIELD_FIELD(u32 txfnum : 5, 746 __BITFIELD_FIELD(u32 txfflsh : 1, 747 __BITFIELD_FIELD(u32 rxfflsh : 1, 748 __BITFIELD_FIELD(u32 intknqflsh : 1, 749 __BITFIELD_FIELD(u32 frmcntrrst : 1, 750 __BITFIELD_FIELD(u32 hsftrst : 1, 751 __BITFIELD_FIELD(u32 csftrst : 1, 752 ;)))))))))) 753 } s; 754}; 755 756/** 757 * cvmx_usbc#_grxfsiz 758 * 759 * Receive FIFO Size Register (GRXFSIZ) 760 * 761 * The application can program the RAM size that must be allocated to the 762 * RxFIFO. 763 */ 764union cvmx_usbcx_grxfsiz { 765 u32 u32; 766 /** 767 * struct cvmx_usbcx_grxfsiz_s 768 * @rxfdep: RxFIFO Depth (RxFDep) 769 * This value is in terms of 32-bit words. 770 * * Minimum value is 16 771 * * Maximum value is 32768 772 */ 773 struct cvmx_usbcx_grxfsiz_s { 774 __BITFIELD_FIELD(u32 reserved_16_31 : 16, 775 __BITFIELD_FIELD(u32 rxfdep : 16, 776 ;)) 777 } s; 778}; 779 780/** 781 * cvmx_usbc#_grxstsph 782 * 783 * Receive Status Read and Pop Register, Host Mode (GRXSTSPH) 784 * 785 * A read to the Receive Status Read and Pop register returns and additionally 786 * pops the top data entry out of the RxFIFO. 787 * This Description is only valid when the core is in Host Mode. For Device Mode 788 * use USBC_GRXSTSPD instead. 789 * NOTE: GRXSTSPH and GRXSTSPD are physically the same register and share the 790 * same offset in the O2P USB core. The offset difference shown in this 791 * document is for software clarity and is actually ignored by the 792 * hardware. 793 */ 794union cvmx_usbcx_grxstsph { 795 u32 u32; 796 /** 797 * struct cvmx_usbcx_grxstsph_s 798 * @pktsts: Packet Status (PktSts) 799 * Indicates the status of the received packet 800 * * 4'b0010: IN data packet received 801 * * 4'b0011: IN transfer completed (triggers an interrupt) 802 * * 4'b0101: Data toggle error (triggers an interrupt) 803 * * 4'b0111: Channel halted (triggers an interrupt) 804 * * Others: Reserved 805 * @dpid: Data PID (DPID) 806 * * 2'b00: DATA0 807 * * 2'b10: DATA1 808 * * 2'b01: DATA2 809 * * 2'b11: MDATA 810 * @bcnt: Byte Count (BCnt) 811 * Indicates the byte count of the received IN data packet 812 * @chnum: Channel Number (ChNum) 813 * Indicates the channel number to which the current received 814 * packet belongs. 815 */ 816 struct cvmx_usbcx_grxstsph_s { 817 __BITFIELD_FIELD(u32 reserved_21_31 : 11, 818 __BITFIELD_FIELD(u32 pktsts : 4, 819 __BITFIELD_FIELD(u32 dpid : 2, 820 __BITFIELD_FIELD(u32 bcnt : 11, 821 __BITFIELD_FIELD(u32 chnum : 4, 822 ;))))) 823 } s; 824}; 825 826/** 827 * cvmx_usbc#_gusbcfg 828 * 829 * Core USB Configuration Register (GUSBCFG) 830 * 831 * This register can be used to configure the core after power-on or a changing 832 * to Host mode or Device mode. It contains USB and USB-PHY related 833 * configuration parameters. The application must program this register before 834 * starting any transactions on either the AHB or the USB. Do not make changes 835 * to this register after the initial programming. 836 */ 837union cvmx_usbcx_gusbcfg { 838 u32 u32; 839 /** 840 * struct cvmx_usbcx_gusbcfg_s 841 * @otgi2csel: UTMIFS or I2C Interface Select (OtgI2CSel) 842 * This bit is always 0x0. 843 * @phylpwrclksel: PHY Low-Power Clock Select (PhyLPwrClkSel) 844 * Software should set this bit to 0x0. 845 * Selects either 480-MHz or 48-MHz (low-power) PHY mode. In 846 * FS and LS modes, the PHY can usually operate on a 48-MHz 847 * clock to save power. 848 * * 1'b0: 480-MHz Internal PLL clock 849 * * 1'b1: 48-MHz External Clock 850 * In 480 MHz mode, the UTMI interface operates at either 60 or 851 * 30-MHz, depending upon whether 8- or 16-bit data width is 852 * selected. In 48-MHz mode, the UTMI interface operates at 48 853 * MHz in FS mode and at either 48 or 6 MHz in LS mode 854 * (depending on the PHY vendor). 855 * This bit drives the utmi_fsls_low_power core output signal, and 856 * is valid only for UTMI+ PHYs. 857 * @usbtrdtim: USB Turnaround Time (USBTrdTim) 858 * Sets the turnaround time in PHY clocks. 859 * Specifies the response time for a MAC request to the Packet 860 * FIFO Controller (PFC) to fetch data from the DFIFO (SPRAM). 861 * This must be programmed to 0x5. 862 * @hnpcap: HNP-Capable (HNPCap) 863 * This bit is always 0x0. 864 * @srpcap: SRP-Capable (SRPCap) 865 * This bit is always 0x0. 866 * @ddrsel: ULPI DDR Select (DDRSel) 867 * Software should set this bit to 0x0. 868 * @physel: USB 2.0 High-Speed PHY or USB 1.1 Full-Speed Serial 869 * Software should set this bit to 0x0. 870 * @fsintf: Full-Speed Serial Interface Select (FSIntf) 871 * Software should set this bit to 0x0. 872 * @ulpi_utmi_sel: ULPI or UTMI+ Select (ULPI_UTMI_Sel) 873 * This bit is always 0x0. 874 * @phyif: PHY Interface (PHYIf) 875 * This bit is always 0x1. 876 * @toutcal: HS/FS Timeout Calibration (TOutCal) 877 * The number of PHY clocks that the application programs in this 878 * field is added to the high-speed/full-speed interpacket timeout 879 * duration in the core to account for any additional delays 880 * introduced by the PHY. This may be required, since the delay 881 * introduced by the PHY in generating the linestate condition may 882 * vary from one PHY to another. 883 * The USB standard timeout value for high-speed operation is 884 * 736 to 816 (inclusive) bit times. The USB standard timeout 885 * value for full-speed operation is 16 to 18 (inclusive) bit 886 * times. The application must program this field based on the 887 * speed of enumeration. The number of bit times added per PHY 888 * clock are: 889 * High-speed operation: 890 * * One 30-MHz PHY clock = 16 bit times 891 * * One 60-MHz PHY clock = 8 bit times 892 * Full-speed operation: 893 * * One 30-MHz PHY clock = 0.4 bit times 894 * * One 60-MHz PHY clock = 0.2 bit times 895 * * One 48-MHz PHY clock = 0.25 bit times 896 */ 897 struct cvmx_usbcx_gusbcfg_s { 898 __BITFIELD_FIELD(u32 reserved_17_31 : 15, 899 __BITFIELD_FIELD(u32 otgi2csel : 1, 900 __BITFIELD_FIELD(u32 phylpwrclksel : 1, 901 __BITFIELD_FIELD(u32 reserved_14_14 : 1, 902 __BITFIELD_FIELD(u32 usbtrdtim : 4, 903 __BITFIELD_FIELD(u32 hnpcap : 1, 904 __BITFIELD_FIELD(u32 srpcap : 1, 905 __BITFIELD_FIELD(u32 ddrsel : 1, 906 __BITFIELD_FIELD(u32 physel : 1, 907 __BITFIELD_FIELD(u32 fsintf : 1, 908 __BITFIELD_FIELD(u32 ulpi_utmi_sel : 1, 909 __BITFIELD_FIELD(u32 phyif : 1, 910 __BITFIELD_FIELD(u32 toutcal : 3, 911 ;))))))))))))) 912 } s; 913}; 914 915/** 916 * cvmx_usbc#_haint 917 * 918 * Host All Channels Interrupt Register (HAINT) 919 * 920 * When a significant event occurs on a channel, the Host All Channels Interrupt 921 * register interrupts the application using the Host Channels Interrupt bit of 922 * the Core Interrupt register (GINTSTS.HChInt). This is shown in Interrupt. 923 * There is one interrupt bit per channel, up to a maximum of 16 bits. Bits in 924 * this register are set and cleared when the application sets and clears bits 925 * in the corresponding Host Channel-n Interrupt register. 926 */ 927union cvmx_usbcx_haint { 928 u32 u32; 929 /** 930 * struct cvmx_usbcx_haint_s 931 * @haint: Channel Interrupts (HAINT) 932 * One bit per channel: Bit 0 for Channel 0, bit 15 for Channel 15 933 */ 934 struct cvmx_usbcx_haint_s { 935 __BITFIELD_FIELD(u32 reserved_16_31 : 16, 936 __BITFIELD_FIELD(u32 haint : 16, 937 ;)) 938 } s; 939}; 940 941/** 942 * cvmx_usbc#_haintmsk 943 * 944 * Host All Channels Interrupt Mask Register (HAINTMSK) 945 * 946 * The Host All Channel Interrupt Mask register works with the Host All Channel 947 * Interrupt register to interrupt the application when an event occurs on a 948 * channel. There is one interrupt mask bit per channel, up to a maximum of 16 949 * bits. 950 * Mask interrupt: 1'b0 Unmask interrupt: 1'b1 951 */ 952union cvmx_usbcx_haintmsk { 953 u32 u32; 954 /** 955 * struct cvmx_usbcx_haintmsk_s 956 * @haintmsk: Channel Interrupt Mask (HAINTMsk) 957 * One bit per channel: Bit 0 for channel 0, bit 15 for channel 15 958 */ 959 struct cvmx_usbcx_haintmsk_s { 960 __BITFIELD_FIELD(u32 reserved_16_31 : 16, 961 __BITFIELD_FIELD(u32 haintmsk : 16, 962 ;)) 963 } s; 964}; 965 966/** 967 * cvmx_usbc#_hcchar# 968 * 969 * Host Channel-n Characteristics Register (HCCHAR) 970 * 971 */ 972union cvmx_usbcx_hccharx { 973 u32 u32; 974 /** 975 * struct cvmx_usbcx_hccharx_s 976 * @chena: Channel Enable (ChEna) 977 * This field is set by the application and cleared by the OTG 978 * host. 979 * * 1'b0: Channel disabled 980 * * 1'b1: Channel enabled 981 * @chdis: Channel Disable (ChDis) 982 * The application sets this bit to stop transmitting/receiving 983 * data on a channel, even before the transfer for that channel is 984 * complete. The application must wait for the Channel Disabled 985 * interrupt before treating the channel as disabled. 986 * @oddfrm: Odd Frame (OddFrm) 987 * This field is set (reset) by the application to indicate that 988 * the OTG host must perform a transfer in an odd (micro)frame. 989 * This field is applicable for only periodic (isochronous and 990 * interrupt) transactions. 991 * * 1'b0: Even (micro)frame 992 * * 1'b1: Odd (micro)frame 993 * @devaddr: Device Address (DevAddr) 994 * This field selects the specific device serving as the data 995 * source or sink. 996 * @ec: Multi Count (MC) / Error Count (EC) 997 * When the Split Enable bit of the Host Channel-n Split Control 998 * register (HCSPLTn.SpltEna) is reset (1'b0), this field indicates 999 * to the host the number of transactions that should be executed 1000 * per microframe for this endpoint.
1001 * * 2'b00: Reserved. This field yields undefined results. 1002 * * 2'b01: 1 transaction 1003 * * 2'b10: 2 transactions to be issued for this endpoint per 1004 * microframe 1005 * * 2'b11: 3 transactions to be issued for this endpoint per 1006 * microframe 1007 * When HCSPLTn.SpltEna is set (1'b1), this field indicates the 1008 * number of immediate retries to be performed for a periodic split 1009 * transactions on transaction errors. This field must be set to at 1010 * least 2'b01. 1011 * @eptype: Endpoint Type (EPType) 1012 * Indicates the transfer type selected. 1013 * * 2'b00: Control 1014 * * 2'b01: Isochronous 1015 * * 2'b10: Bulk 1016 * * 2'b11: Interrupt 1017 * @lspddev: Low-Speed Device (LSpdDev) 1018 * This field is set by the application to indicate that this 1019 * channel is communicating to a low-speed device. 1020 * @epdir: Endpoint Direction (EPDir) 1021 * Indicates whether the transaction is IN or OUT. 1022 * * 1'b0: OUT 1023 * * 1'b1: IN 1024 * @epnum: Endpoint Number (EPNum) 1025 * Indicates the endpoint number on the device serving as the 1026 * data source or sink. 1027 * @mps: Maximum Packet Size (MPS) 1028 * Indicates the maximum packet size of the associated endpoint. 1029 */ 1030 struct cvmx_usbcx_hccharx_s { 1031 __BITFIELD_FIELD(u32 chena : 1, 1032 __BITFIELD_FIELD(u32 chdis : 1, 1033 __BITFIELD_FIELD(u32 oddfrm : 1, 1034 __BITFIELD_FIELD(u32 devaddr : 7, 1035 __BITFIELD_FIELD(u32 ec : 2, 1036 __BITFIELD_FIELD(u32 eptype : 2, 1037 __BITFIELD_FIELD(u32 lspddev : 1, 1038 __BITFIELD_FIELD(u32 reserved_16_16 : 1, 1039 __BITFIELD_FIELD(u32 epdir : 1, 1040 __BITFIELD_FIELD(u32 epnum : 4, 1041 __BITFIELD_FIELD(u32 mps : 11, 1042 ;))))))))))) 1043 } s; 1044}; 1045 1046/** 1047 * cvmx_usbc#_hcfg 1048 * 1049 * Host Configuration Register (HCFG) 1050 * 1051 * This register configures the core after power-on. Do not make changes to this 1052 * register after initializing the host. 1053 */ 1054union cvmx_usbcx_hcfg { 1055 u32 u32; 1056 /** 1057 * struct cvmx_usbcx_hcfg_s 1058 * @fslssupp: FS- and LS-Only Support (FSLSSupp) 1059 * The application uses this bit to control the core's enumeration 1060 * speed. Using this bit, the application can make the core 1061 * enumerate as a FS host, even if the connected device supports 1062 * HS traffic. Do not make changes to this field after initial 1063 * programming. 1064 * * 1'b0: HS/FS/LS, based on the maximum speed supported by 1065 * the connected device 1066 * * 1'b1: FS/LS-only, even if the connected device can support HS 1067 * @fslspclksel: FS/LS PHY Clock Select (FSLSPclkSel) 1068 * When the core is in FS Host mode 1069 * * 2'b00: PHY clock is running at 30/60 MHz 1070 * * 2'b01: PHY clock is running at 48 MHz 1071 * * Others: Reserved 1072 * When the core is in LS Host mode 1073 * * 2'b00: PHY clock is running at 30/60 MHz. When the 1074 * UTMI+/ULPI PHY Low Power mode is not selected, use 1075 * 30/60 MHz. 1076 * * 2'b01: PHY clock is running at 48 MHz. When the UTMI+ 1077 * PHY Low Power mode is selected, use 48MHz if the PHY 1078 * supplies a 48 MHz clock during LS mode. 1079 * * 2'b10: PHY clock is running at 6 MHz. In USB 1.1 FS mode, 1080 * use 6 MHz when the UTMI+ PHY Low Power mode is 1081 * selected and the PHY supplies a 6 MHz clock during LS 1082 * mode. If you select a 6 MHz clock during LS mode, you must 1083 * do a soft reset. 1084 * * 2'b11: Reserved 1085 */ 1086 struct cvmx_usbcx_hcfg_s { 1087 __BITFIELD_FIELD(u32 reserved_3_31 : 29, 1088 __BITFIELD_FIELD(u32 fslssupp : 1, 1089 __BITFIELD_FIELD(u32 fslspclksel : 2, 1090 ;))) 1091 } s; 1092}; 1093 1094/** 1095 * cvmx_usbc#_hcint# 1096 * 1097 * Host Channel-n Interrupt Register (HCINT) 1098 * 1099 * This register indicates the status of a channel with respect to USB- and 1100 * AHB-related events. The application must read this register when the Host 1101 * Channels Interrupt bit of the Core Interrupt register (GINTSTS.HChInt) is 1102 * set. Before the application can read this register, it must first read 1103 * the Host All Channels Interrupt (HAINT) register to get the exact channel 1104 * number for the Host Channel-n Interrupt register. The application must clear 1105 * the appropriate bit in this register to clear the corresponding bits in the 1106 * HAINT and GINTSTS registers. 1107 */ 1108union cvmx_usbcx_hcintx { 1109 u32 u32; 1110 /** 1111 * struct cvmx_usbcx_hcintx_s 1112 * @datatglerr: Data Toggle Error (DataTglErr) 1113 * @frmovrun: Frame Overrun (FrmOvrun) 1114 * @bblerr: Babble Error (BblErr) 1115 * @xacterr: Transaction Error (XactErr) 1116 * @nyet: NYET Response Received Interrupt (NYET) 1117 * @ack: ACK Response Received Interrupt (ACK) 1118 * @nak: NAK Response Received Interrupt (NAK) 1119 * @stall: STALL Response Received Interrupt (STALL) 1120 * @ahberr: This bit is always 0x0. 1121 * @chhltd: Channel Halted (ChHltd) 1122 * Indicates the transfer completed abnormally either because of 1123 * any USB transaction error or in response to disable request by 1124 * the application. 1125 * @xfercompl: Transfer Completed (XferCompl) 1126 * Transfer completed normally without any errors. 1127 */ 1128 struct cvmx_usbcx_hcintx_s { 1129 __BITFIELD_FIELD(u32 reserved_11_31 : 21, 1130 __BITFIELD_FIELD(u32 datatglerr : 1, 1131 __BITFIELD_FIELD(u32 frmovrun : 1, 1132 __BITFIELD_FIELD(u32 bblerr : 1, 1133 __BITFIELD_FIELD(u32 xacterr : 1, 1134 __BITFIELD_FIELD(u32 nyet : 1, 1135 __BITFIELD_FIELD(u32 ack : 1, 1136 __BITFIELD_FIELD(u32 nak : 1, 1137 __BITFIELD_FIELD(u32 stall : 1, 1138 __BITFIELD_FIELD(u32 ahberr : 1, 1139 __BITFIELD_FIELD(u32 chhltd : 1, 1140 __BITFIELD_FIELD(u32 xfercompl : 1, 1141 ;)))))))))))) 1142 } s; 1143}; 1144 1145/** 1146 * cvmx_usbc#_hcintmsk# 1147 * 1148 * Host Channel-n Interrupt Mask Register (HCINTMSKn) 1149 * 1150 * This register reflects the mask for each channel status described in the 1151 * previous section. 1152 * Mask interrupt: 1'b0 Unmask interrupt: 1'b1 1153 */ 1154union cvmx_usbcx_hcintmskx { 1155 u32 u32; 1156 /** 1157 * struct cvmx_usbcx_hcintmskx_s 1158 * @datatglerrmsk: Data Toggle Error Mask (DataTglErrMsk) 1159 * @frmovrunmsk: Frame Overrun Mask (FrmOvrunMsk) 1160 * @bblerrmsk: Babble Error Mask (BblErrMsk) 1161 * @xacterrmsk: Transaction Error Mask (XactErrMsk) 1162 * @nyetmsk: NYET Response Received Interrupt Mask (NyetMsk) 1163 * @ackmsk: ACK Response Received Interrupt Mask (AckMsk) 1164 * @nakmsk: NAK Response Received Interrupt Mask (NakMsk) 1165 * @stallmsk: STALL Response Received Interrupt Mask (StallMsk) 1166 * @ahberrmsk: AHB Error Mask (AHBErrMsk) 1167 * @chhltdmsk: Channel Halted Mask (ChHltdMsk) 1168 * @xfercomplmsk: Transfer Completed Mask (XferComplMsk) 1169 */ 1170 struct cvmx_usbcx_hcintmskx_s { 1171 __BITFIELD_FIELD(u32 reserved_11_31 : 21, 1172 __BITFIELD_FIELD(u32 datatglerrmsk : 1, 1173 __BITFIELD_FIELD(u32 frmovrunmsk : 1, 1174 __BITFIELD_FIELD(u32 bblerrmsk : 1, 1175 __BITFIELD_FIELD(u32 xacterrmsk : 1, 1176 __BITFIELD_FIELD(u32 nyetmsk : 1, 1177 __BITFIELD_FIELD(u32 ackmsk : 1, 1178 __BITFIELD_FIELD(u32 nakmsk : 1, 1179 __BITFIELD_FIELD(u32 stallmsk : 1, 1180 __BITFIELD_FIELD(u32 ahberrmsk : 1, 1181 __BITFIELD_FIELD(u32 chhltdmsk : 1, 1182 __BITFIELD_FIELD(u32 xfercomplmsk : 1, 1183 ;)))))))))))) 1184 } s; 1185}; 1186 1187/** 1188 * cvmx_usbc#_hcsplt# 1189 * 1190 * Host Channel-n Split Control Register (HCSPLT) 1191 * 1192 */ 1193union cvmx_usbcx_hcspltx { 1194 u32 u32; 1195 /** 1196 * struct cvmx_usbcx_hcspltx_s 1197 * @spltena: Split Enable (SpltEna) 1198 * The application sets this field to indicate that this channel is 1199 * enabled to perform split transactions. 1200 * @compsplt: Do Complete Split (CompSplt) 1201 * The application sets this field to request the OTG host to 1202 * perform a complete split transaction. 1203 * @xactpos: Transaction Position (XactPos) 1204 * This field is used to determine whether to send all, first, 1205 * middle, or last payloads with each OUT transaction. 1206 * * 2'b11: All. This is the entire data payload is of this 1207 * transaction (which is less than or equal to 188 bytes). 1208 * * 2'b10: Begin. This is the first data payload of this 1209 * transaction (which is larger than 188 bytes). 1210 * * 2'b00: Mid. This is the middle payload of this transaction 1211 * (which is larger than 188 bytes). 1212 * * 2'b01: End. This is the last payload of this transaction 1213 * (which is larger than 188 bytes). 1214 * @hubaddr: Hub Address (HubAddr) 1215 * This field holds the device address of the transaction 1216 * translator's hub. 1217 * @prtaddr: Port Address (PrtAddr) 1218 * This field is the port number of the recipient transaction 1219 * translator. 1220 */ 1221 struct cvmx_usbcx_hcspltx_s { 1222 __BITFIELD_FIELD(u32 spltena : 1, 1223 __BITFIELD_FIELD(u32 reserved_17_30 : 14, 1224 __BITFIELD_FIELD(u32 compsplt : 1, 1225 __BITFIELD_FIELD(u32 xactpos : 2, 1226 __BITFIELD_FIELD(u32 hubaddr : 7, 1227 __BITFIELD_FIELD(u32 prtaddr : 7, 1228 ;)))))) 1229 } s; 1230}; 1231 1232/** 1233 * cvmx_usbc#_hctsiz# 1234 * 1235 * Host Channel-n Transfer Size Register (HCTSIZ) 1236 * 1237 */ 1238union cvmx_usbcx_hctsizx { 1239 u32 u32; 1240 /** 1241 * struct cvmx_usbcx_hctsizx_s 1242 * @dopng: Do Ping (DoPng) 1243 * Setting this field to 1 directs the host to do PING protocol. 1244 * @pid: PID (Pid) 1245 * The application programs this field with the type of PID to use 1246 * for the initial transaction. The host will maintain this field 1247 * for the rest of the transfer. 1248 * * 2'b00: DATA0 1249 * * 2'b01: DATA2 1250 * * 2'b10: DATA1 1251 * * 2'b11: MDATA (non-control)/SETUP (control) 1252 * @pktcnt: Packet Count (PktCnt) 1253 * This field is programmed by the application with the expected 1254 * number of packets to be transmitted (OUT) or received (IN). 1255 * The host decrements this count on every successful 1256 * transmission or reception of an OUT/IN packet. Once this count 1257 * reaches zero, the application is interrupted to indicate normal 1258 * completion. 1259 * @xfersize: Transfer Size (XferSize) 1260 * For an OUT, this field is the number of data bytes the host will 1261 * send during the transfer. 1262 * For an IN, this field is the buffer size that the application 1263 * has reserved for the transfer. The application is expected to 1264 * program this field as an integer multiple of the maximum packet 1265 * size for IN transactions (periodic and non-periodic). 1266 */ 1267 struct cvmx_usbcx_hctsizx_s { 1268 __BITFIELD_FIELD(u32 dopng : 1, 1269 __BITFIELD_FIELD(u32 pid : 2, 1270 __BITFIELD_FIELD(u32 pktcnt : 10, 1271 __BITFIELD_FIELD(u32 xfersize : 19, 1272 ;)))) 1273 } s; 1274}; 1275 1276/** 1277 * cvmx_usbc#_hfir 1278 * 1279 * Host Frame Interval Register (HFIR) 1280 * 1281 * This register stores the frame interval information for the current speed to 1282 * which the O2P USB core has enumerated. 1283 */ 1284union cvmx_usbcx_hfir { 1285 u32 u32; 1286 /** 1287 * struct cvmx_usbcx_hfir_s 1288 * @frint: Frame Interval (FrInt) 1289 * The value that the application programs to this field specifies 1290 * the interval between two consecutive SOFs (FS) or micro- 1291 * SOFs (HS) or Keep-Alive tokens (HS). This field contains the 1292 * number of PHY clocks that constitute the required frame 1293 * interval. The default value set in this field for a FS operation 1294 * when the PHY clock frequency is 60 MHz. The application can 1295 * write a value to this register only after the Port Enable bit of 1296 * the Host Port Control and Status register (HPRT.PrtEnaPort) 1297 * has been set. If no value is programmed, the core calculates 1298 * the value based on the PHY clock specified in the FS/LS PHY 1299 * Clock Select field of the Host Configuration register 1300 * (HCFG.FSLSPclkSel). Do not change the value of this field 1301 * after the initial configuration. 1302 * * 125 us (PHY clock frequency for HS) 1303 * * 1 ms (PHY clock frequency for FS/LS) 1304 */ 1305 struct cvmx_usbcx_hfir_s { 1306 __BITFIELD_FIELD(u32 reserved_16_31 : 16, 1307 __BITFIELD_FIELD(u32 frint : 16, 1308 ;)) 1309 } s; 1310}; 1311 1312/** 1313 * cvmx_usbc#_hfnum 1314 * 1315 * Host Frame Number/Frame Time Remaining Register (HFNUM) 1316 * 1317 * This register indicates the current frame number. 1318 * It also indicates the time remaining (in terms of the number of PHY clocks) 1319 * in the current (micro)frame. 1320 */ 1321union cvmx_usbcx_hfnum { 1322 u32 u32; 1323 /** 1324 * struct cvmx_usbcx_hfnum_s 1325 * @frrem: Frame Time Remaining (FrRem) 1326 * Indicates the amount of time remaining in the current 1327 * microframe (HS) or frame (FS/LS), in terms of PHY clocks. 1328 * This field decrements on each PHY clock. When it reaches 1329 * zero, this field is reloaded with the value in the Frame 1330 * Interval register and a new SOF is transmitted on the USB. 1331 * @frnum: Frame Number (FrNum) 1332 * This field increments when a new SOF is transmitted on the 1333 * USB, and is reset to 0 when it reaches 16'h3FFF. 1334 */ 1335 struct cvmx_usbcx_hfnum_s { 1336 __BITFIELD_FIELD(u32 frrem : 16, 1337 __BITFIELD_FIELD(u32 frnum : 16, 1338 ;)) 1339 } s; 1340}; 1341 1342/** 1343 * cvmx_usbc#_hprt 1344 * 1345 * Host Port Control and Status Register (HPRT) 1346 * 1347 * This register is available in both Host and Device modes. 1348 * Currently, the OTG Host supports only one port. 1349 * A single register holds USB port-related information such as USB reset, 1350 * enable, suspend, resume, connect status, and test mode for each port. The 1351 * R_SS_WC bits in this register can trigger an interrupt to the application 1352 * through the Host Port Interrupt bit of the Core Interrupt register 1353 * (GINTSTS.PrtInt). On a Port Interrupt, the application must read this 1354 * register and clear the bit that caused the interrupt. For the R_SS_WC bits, 1355 * the application must write a 1 to the bit to clear the interrupt. 1356 */ 1357union cvmx_usbcx_hprt { 1358 u32 u32; 1359 /** 1360 * struct cvmx_usbcx_hprt_s 1361 * @prtspd: Port Speed (PrtSpd) 1362 * Indicates the speed of the device attached to this port. 1363 * * 2'b00: High speed 1364 * * 2'b01: Full speed 1365 * * 2'b10: Low speed 1366 * * 2'b11: Reserved 1367 * @prttstctl: Port Test Control (PrtTstCtl) 1368 * The application writes a nonzero value to this field to put 1369 * the port into a Test mode, and the corresponding pattern is 1370 * signaled on the port. 1371 * * 4'b0000: Test mode disabled 1372 * * 4'b0001: Test_J mode 1373 * * 4'b0010: Test_K mode 1374 * * 4'b0011: Test_SE0_NAK mode 1375 * * 4'b0100: Test_Packet mode 1376 * * 4'b0101: Test_Force_Enable 1377 * * Others: Reserved 1378 * PrtSpd must be zero (i.e. the interface must be in high-speed 1379 * mode) to use the PrtTstCtl test modes. 1380 * @prtpwr: Port Power (PrtPwr) 1381 * The application uses this field to control power to this port, 1382 * and the core clears this bit on an overcurrent condition. 1383 * * 1'b0: Power off 1384 * * 1'b1: Power on 1385 * @prtlnsts: Port Line Status (PrtLnSts) 1386 * Indicates the current logic level USB data lines 1387 * * Bit [10]: Logic level of D- 1388 * * Bit [11]: Logic level of D+ 1389 * @prtrst: Port Reset (PrtRst) 1390 * When the application sets this bit, a reset sequence is 1391 * started on this port. The application must time the reset 1392 * period and clear this bit after the reset sequence is 1393 * complete. 1394 * * 1'b0: Port not in reset 1395 * * 1'b1: Port in reset 1396 * The application must leave this bit set for at least a 1397 * minimum duration mentioned below to start a reset on the 1398 * port. The application can leave it set for another 10 ms in 1399 * addition to the required minimum duration, before clearing 1400 * the bit, even though there is no maximum limit set by the 1401 * USB standard. 1402 * * High speed: 50 ms 1403 * * Full speed/Low speed: 10 ms 1404 * @prtsusp: Port Suspend (PrtSusp) 1405 * The application sets this bit to put this port in Suspend 1406 * mode. The core only stops sending SOFs when this is set. 1407 * To stop the PHY clock, the application must set the Port 1408 * Clock Stop bit, which will assert the suspend input pin of 1409 * the PHY. 1410 * The read value of this bit reflects the current suspend 1411 * status of the port. This bit is cleared by the core after a 1412 * remote wakeup signal is detected or the application sets 1413 * the Port Reset bit or Port Resume bit in this register or the 1414 * Resume/Remote Wakeup Detected Interrupt bit or 1415 * Disconnect Detected Interrupt bit in the Core Interrupt 1416 * register (GINTSTS.WkUpInt or GINTSTS.DisconnInt, 1417 * respectively). 1418 * * 1'b0: Port not in Suspend mode 1419 * * 1'b1: Port in Suspend mode 1420 * @prtres: Port Resume (PrtRes) 1421 * The application sets this bit to drive resume signaling on 1422 * the port. The core continues to drive the resume signal 1423 * until the application clears this bit. 1424 * If the core detects a USB remote wakeup sequence, as 1425 * indicated by the Port Resume/Remote Wakeup Detected 1426 * Interrupt bit of the Core Interrupt register 1427 * (GINTSTS.WkUpInt), the core starts driving resume 1428 * signaling without application intervention and clears this bit 1429 * when it detects a disconnect condition. The read value of 1430 * this bit indicates whether the core is currently driving 1431 * resume signaling. 1432 * * 1'b0: No resume driven 1433 * * 1'b1: Resume driven 1434 * @prtovrcurrchng: Port Overcurrent Change (PrtOvrCurrChng) 1435 * The core sets this bit when the status of the Port 1436 * Overcurrent Active bit (bit 4) in this register changes. 1437 * @prtovrcurract: Port Overcurrent Active (PrtOvrCurrAct) 1438 * Indicates the overcurrent condition of the port. 1439 * * 1'b0: No overcurrent condition 1440 * * 1'b1: Overcurrent condition 1441 * @prtenchng: Port Enable/Disable Change (PrtEnChng) 1442 * The core sets this bit when the status of the Port Enable bit 1443 * [2] of this register changes. 1444 * @prtena: Port Enable (PrtEna) 1445 * A port is enabled only by the core after a reset sequence, 1446 * and is disabled by an overcurrent condition, a disconnect 1447 * condition, or by the application clearing this bit. The 1448 * application cannot set this bit by a register write. It can only 1449 * clear it to disable the port. This bit does not trigger any 1450 * interrupt to the application. 1451 * * 1'b0: Port disabled 1452 * * 1'b1: Port enabled 1453 * @prtconndet: Port Connect Detected (PrtConnDet) 1454 * The core sets this bit when a device connection is detected 1455 * to trigger an interrupt to the application using the Host Port 1456 * Interrupt bit of the Core Interrupt register (GINTSTS.PrtInt). 1457 * The application must write a 1 to this bit to clear the 1458 * interrupt. 1459 * @prtconnsts: Port Connect Status (PrtConnSts) 1460 * * 0: No device is attached to the port. 1461 * * 1: A device is attached to the port. 1462 */ 1463 struct cvmx_usbcx_hprt_s { 1464 __BITFIELD_FIELD(u32 reserved_19_31 : 13, 1465 __BITFIELD_FIELD(u32 prtspd : 2, 1466 __BITFIELD_FIELD(u32 prttstctl : 4, 1467 __BITFIELD_FIELD(u32 prtpwr : 1, 1468 __BITFIELD_FIELD(u32 prtlnsts : 2, 1469 __BITFIELD_FIELD(u32 reserved_9_9 : 1, 1470 __BITFIELD_FIELD(u32 prtrst : 1, 1471 __BITFIELD_FIELD(u32 prtsusp : 1, 1472 __BITFIELD_FIELD(u32 prtres : 1, 1473 __BITFIELD_FIELD(u32 prtovrcurrchng : 1, 1474 __BITFIELD_FIELD(u32 prtovrcurract : 1, 1475 __BITFIELD_FIELD(u32 prtenchng : 1, 1476 __BITFIELD_FIELD(u32 prtena : 1, 1477 __BITFIELD_FIELD(u32 prtconndet : 1, 1478 __BITFIELD_FIELD(u32 prtconnsts : 1, 1479 ;))))))))))))))) 1480 } s; 1481}; 1482 1483/** 1484 * cvmx_usbc#_hptxfsiz 1485 * 1486 * Host Periodic Transmit FIFO Size Register (HPTXFSIZ) 1487 * 1488 * This register holds the size and the memory start address of the Periodic 1489 * TxFIFO, as shown in Figures 310 and 311. 1490 */ 1491union cvmx_usbcx_hptxfsiz { 1492 u32 u32; 1493 /** 1494 * struct cvmx_usbcx_hptxfsiz_s 1495 * @ptxfsize: Host Periodic TxFIFO Depth (PTxFSize) 1496 * This value is in terms of 32-bit words. 1497 * * Minimum value is 16 1498 * * Maximum value is 32768 1499 * @ptxfstaddr: Host Periodic TxFIFO Start Address (PTxFStAddr) 1500 */ 1501 struct cvmx_usbcx_hptxfsiz_s { 1502 __BITFIELD_FIELD(u32 ptxfsize : 16, 1503 __BITFIELD_FIELD(u32 ptxfstaddr : 16, 1504 ;)) 1505 } s; 1506}; 1507 1508/** 1509 * cvmx_usbc#_hptxsts 1510 * 1511 * Host Periodic Transmit FIFO/Queue Status Register (HPTXSTS) 1512 * 1513 * This read-only register contains the free space information for the Periodic 1514 * TxFIFO and the Periodic Transmit Request Queue 1515 */ 1516union cvmx_usbcx_hptxsts { 1517 u32 u32; 1518 /** 1519 * struct cvmx_usbcx_hptxsts_s 1520 * @ptxqtop: Top of the Periodic Transmit Request Queue (PTxQTop) 1521 * This indicates the entry in the Periodic Tx Request Queue that 1522 * is currently being processes by the MAC. 1523 * This register is used for debugging. 1524 * * Bit [31]: Odd/Even (micro)frame 1525 * - 1'b0: send in even (micro)frame 1526 * - 1'b1: send in odd (micro)frame 1527 * * Bits [30:27]: Channel/endpoint number 1528 * * Bits [26:25]: Type 1529 * - 2'b00: IN/OUT 1530 * - 2'b01: Zero-length packet 1531 * - 2'b10: CSPLIT 1532 * - 2'b11: Disable channel command 1533 * * Bit [24]: Terminate (last entry for the selected 1534 * channel/endpoint) 1535 * @ptxqspcavail: Periodic Transmit Request Queue Space Available 1536 * (PTxQSpcAvail) 1537 * Indicates the number of free locations available to be written 1538 * in the Periodic Transmit Request Queue. This queue holds both 1539 * IN and OUT requests. 1540 * * 8'h0: Periodic Transmit Request Queue is full 1541 * * 8'h1: 1 location available 1542 * * 8'h2: 2 locations available 1543 * * n: n locations available (0..8) 1544 * * Others: Reserved 1545 * @ptxfspcavail: Periodic Transmit Data FIFO Space Available 1546 * (PTxFSpcAvail) 1547 * Indicates the number of free locations available to be written 1548 * to in the Periodic TxFIFO. 1549 * Values are in terms of 32-bit words 1550 * * 16'h0: Periodic TxFIFO is full 1551 * * 16'h1: 1 word available 1552 * * 16'h2: 2 words available 1553 * * 16'hn: n words available (where 0..32768) 1554 * * 16'h8000: 32768 words available 1555 * * Others: Reserved 1556 */ 1557 struct cvmx_usbcx_hptxsts_s { 1558 __BITFIELD_FIELD(u32 ptxqtop : 8, 1559 __BITFIELD_FIELD(u32 ptxqspcavail : 8, 1560 __BITFIELD_FIELD(u32 ptxfspcavail : 16, 1561 ;))) 1562 } s; 1563}; 1564 1565/** 1566 * cvmx_usbn#_clk_ctl 1567 * 1568 * USBN_CLK_CTL = USBN's Clock Control 1569 * 1570 * This register is used to control the frequency of the hclk and the 1571 * hreset and phy_rst signals. 1572 */ 1573union cvmx_usbnx_clk_ctl { 1574 u64 u64; 1575 /** 1576 * struct cvmx_usbnx_clk_ctl_s 1577 * @divide2: The 'hclk' used by the USB subsystem is derived 1578 * from the eclk. 1579 * Also see the field DIVIDE. DIVIDE2<1> must currently 1580 * be zero because it is not implemented, so the maximum 1581 * ratio of eclk/hclk is currently 16. 1582 * The actual divide number for hclk is: 1583 * (DIVIDE2 + 1) * (DIVIDE + 1) 1584 * @hclk_rst: When this field is '0' the HCLK-DIVIDER used to 1585 * generate the hclk in the USB Subsystem is held 1586 * in reset. This bit must be set to '0' before 1587 * changing the value os DIVIDE in this register. 1588 * The reset to the HCLK_DIVIDERis also asserted 1589 * when core reset is asserted. 1590 * @p_x_on: Force USB-PHY on during suspend. 1591 * '1' USB-PHY XO block is powered-down during 1592 * suspend. 1593 * '0' USB-PHY XO block is powered-up during 1594 * suspend. 1595 * The value of this field must be set while POR is 1596 * active. 1597 * @p_rtype: PHY reference clock type 1598 * On CN50XX/CN52XX/CN56XX the values are: 1599 * '0' The USB-PHY uses a 12MHz crystal as a clock source 1600 * at the USB_XO and USB_XI pins. 1601 * '1' Reserved. 1602 * '2' The USB_PHY uses 12/24/48MHz 2.5V board clock at the 1603 * USB_XO pin. USB_XI should be tied to ground in this 1604 * case. 1605 * '3' Reserved. 1606 * On CN3xxx bits 14 and 15 are p_xenbn and p_rclk and values are: 1607 * '0' Reserved. 1608 * '1' Reserved. 1609 * '2' The PHY PLL uses the XO block output as a reference. 1610 * The XO block uses an external clock supplied on the 1611 * XO pin. USB_XI should be tied to ground for this 1612 * usage. 1613 * '3' The XO block uses the clock from a crystal. 1614 * @p_com_on: '0' Force USB-PHY XO Bias, Bandgap and PLL to 1615 * remain powered in Suspend Mode. 1616 * '1' The USB-PHY XO Bias, Bandgap and PLL are 1617 * powered down in suspend mode. 1618 * The value of this field must be set while POR is 1619 * active. 1620 * @p_c_sel: Phy clock speed select. 1621 * Selects the reference clock / crystal frequency. 1622 * '11': Reserved 1623 * '10': 48 MHz (reserved when a crystal is used) 1624 * '01': 24 MHz (reserved when a crystal is used) 1625 * '00': 12 MHz 1626 * The value of this field must be set while POR is 1627 * active. 1628 * NOTE: if a crystal is used as a reference clock, 1629 * this field must be set to 12 MHz. 1630 * @cdiv_byp: Used to enable the bypass input to the USB_CLK_DIV. 1631 * @sd_mode: Scaledown mode for the USBC. Control timing events 1632 * in the USBC, for normal operation this must be '0'. 1633 * @s_bist: Starts bist on the hclk memories, during the '0' 1634 * to '1' transition. 1635 * @por: Power On Reset for the PHY. 1636 * Resets all the PHYS registers and state machines. 1637 * @enable: When '1' allows the generation of the hclk. When 1638 * '0' the hclk will not be generated. SEE DIVIDE 1639 * field of this register. 1640 * @prst: When this field is '0' the reset associated with 1641 * the phy_clk functionality in the USB Subsystem is 1642 * help in reset. This bit should not be set to '1' 1643 * until the time it takes 6 clocks (hclk or phy_clk, 1644 * whichever is slower) has passed. Under normal 1645 * operation once this bit is set to '1' it should not 1646 * be set to '0'. 1647 * @hrst: When this field is '0' the reset associated with 1648 * the hclk functioanlity in the USB Subsystem is 1649 * held in reset.This bit should not be set to '1' 1650 * until 12ms after phy_clk is stable. Under normal 1651 * operation, once this bit is set to '1' it should 1652 * not be set to '0'. 1653 * @divide: The frequency of 'hclk' used by the USB subsystem 1654 * is the eclk frequency divided by the value of 1655 * (DIVIDE2 + 1) * (DIVIDE + 1), also see the field 1656 * DIVIDE2 of this register. 1657 * The hclk frequency should be less than 125Mhz. 1658 * After writing a value to this field the SW should 1659 * read the field for the value written. 1660 * The ENABLE field of this register should not be set 1661 * until AFTER this field is set and then read. 1662 */ 1663 struct cvmx_usbnx_clk_ctl_s { 1664 __BITFIELD_FIELD(u64 reserved_20_63 : 44, 1665 __BITFIELD_FIELD(u64 divide2 : 2, 1666 __BITFIELD_FIELD(u64 hclk_rst : 1, 1667 __BITFIELD_FIELD(u64 p_x_on : 1, 1668 __BITFIELD_FIELD(u64 p_rtype : 2, 1669 __BITFIELD_FIELD(u64 p_com_on : 1, 1670 __BITFIELD_FIELD(u64 p_c_sel : 2, 1671 __BITFIELD_FIELD(u64 cdiv_byp : 1, 1672 __BITFIELD_FIELD(u64 sd_mode : 2, 1673 __BITFIELD_FIELD(u64 s_bist : 1, 1674 __BITFIELD_FIELD(u64 por : 1, 1675 __BITFIELD_FIELD(u64 enable : 1, 1676 __BITFIELD_FIELD(u64 prst : 1, 1677 __BITFIELD_FIELD(u64 hrst : 1, 1678 __BITFIELD_FIELD(u64 divide : 3, 1679 ;))))))))))))))) 1680 } s; 1681}; 1682 1683/** 1684 * cvmx_usbn#_usbp_ctl_status 1685 * 1686 * USBN_USBP_CTL_STATUS = USBP Control And Status Register 1687 * 1688 * Contains general control and status information for the USBN block. 1689 */ 1690union cvmx_usbnx_usbp_ctl_status { 1691 u64 u64; 1692 /** 1693 * struct cvmx_usbnx_usbp_ctl_status_s 1694 * @txrisetune: HS Transmitter Rise/Fall Time Adjustment 1695 * @txvreftune: HS DC Voltage Level Adjustment 1696 * @txfslstune: FS/LS Source Impedance Adjustment 1697 * @txhsxvtune: Transmitter High-Speed Crossover Adjustment 1698 * @sqrxtune: Squelch Threshold Adjustment 1699 * @compdistune: Disconnect Threshold Adjustment 1700 * @otgtune: VBUS Valid Threshold Adjustment 1701 * @otgdisable: OTG Block Disable 1702 * @portreset: Per_Port Reset 1703 * @drvvbus: Drive VBUS 1704 * @lsbist: Low-Speed BIST Enable. 1705 * @fsbist: Full-Speed BIST Enable. 1706 * @hsbist: High-Speed BIST Enable. 1707 * @bist_done: PHY Bist Done. 1708 * Asserted at the end of the PHY BIST sequence. 1709 * @bist_err: PHY Bist Error. 1710 * Indicates an internal error was detected during 1711 * the BIST sequence. 1712 * @tdata_out: PHY Test Data Out. 1713 * Presents either internaly generated signals or 1714 * test register contents, based upon the value of 1715 * test_data_out_sel. 1716 * @siddq: Drives the USBP (USB-PHY) SIDDQ input. 1717 * Normally should be set to zero. 1718 * When customers have no intent to use USB PHY 1719 * interface, they should: 1720 * - still provide 3.3V to USB_VDD33, and 1721 * - tie USB_REXT to 3.3V supply, and 1722 * - set USBN*_USBP_CTL_STATUS[SIDDQ]=1 1723 * @txpreemphasistune: HS Transmitter Pre-Emphasis Enable 1724 * @dma_bmode: When set to 1 the L2C DMA address will be updated 1725 * with byte-counts between packets. When set to 0 1726 * the L2C DMA address is incremented to the next 1727 * 4-byte aligned address after adding byte-count. 1728 * @usbc_end: Bigendian input to the USB Core. This should be 1729 * set to '0' for operation. 1730 * @usbp_bist: PHY, This is cleared '0' to run BIST on the USBP. 1731 * @tclk: PHY Test Clock, used to load TDATA_IN to the USBP. 1732 * @dp_pulld: PHY DP_PULLDOWN input to the USB-PHY. 1733 * This signal enables the pull-down resistance on 1734 * the D+ line. '1' pull down-resistance is connected 1735 * to D+/ '0' pull down resistance is not connected 1736 * to D+. When an A/B device is acting as a host 1737 * (downstream-facing port), dp_pulldown and 1738 * dm_pulldown are enabled. This must not toggle 1739 * during normal opeartion. 1740 * @dm_pulld: PHY DM_PULLDOWN input to the USB-PHY. 1741 * This signal enables the pull-down resistance on 1742 * the D- line. '1' pull down-resistance is connected 1743 * to D-. '0' pull down resistance is not connected 1744 * to D-. When an A/B device is acting as a host 1745 * (downstream-facing port), dp_pulldown and 1746 * dm_pulldown are enabled. This must not toggle 1747 * during normal opeartion. 1748 * @hst_mode: When '0' the USB is acting as HOST, when '1' 1749 * USB is acting as device. This field needs to be 1750 * set while the USB is in reset. 1751 * @tuning: Transmitter Tuning for High-Speed Operation. 1752 * Tunes the current supply and rise/fall output 1753 * times for high-speed operation. 1754 * [20:19] == 11: Current supply increased 1755 * approximately 9% 1756 * [20:19] == 10: Current supply increased 1757 * approximately 4.5% 1758 * [20:19] == 01: Design default. 1759 * [20:19] == 00: Current supply decreased 1760 * approximately 4.5% 1761 * [22:21] == 11: Rise and fall times are increased. 1762 * [22:21] == 10: Design default. 1763 * [22:21] == 01: Rise and fall times are decreased. 1764 * [22:21] == 00: Rise and fall times are decreased 1765 * further as compared to the 01 setting. 1766 * @tx_bs_enh: Transmit Bit Stuffing on [15:8]. 1767 * Enables or disables bit stuffing on data[15:8] 1768 * when bit-stuffing is enabled. 1769 * @tx_bs_en: Transmit Bit Stuffing on [7:0]. 1770 * Enables or disables bit stuffing on data[7:0] 1771 * when bit-stuffing is enabled. 1772 * @loop_enb: PHY Loopback Test Enable. 1773 * '1': During data transmission the receive is 1774 * enabled. 1775 * '0': During data transmission the receive is 1776 * disabled. 1777 * Must be '0' for normal operation. 1778 * @vtest_enb: Analog Test Pin Enable. 1779 * '1' The PHY's analog_test pin is enabled for the 1780 * input and output of applicable analog test signals. 1781 * '0' THe analog_test pin is disabled. 1782 * @bist_enb: Built-In Self Test Enable. 1783 * Used to activate BIST in the PHY. 1784 * @tdata_sel: Test Data Out Select. 1785 * '1' test_data_out[3:0] (PHY) register contents 1786 * are output. '0' internaly generated signals are 1787 * output. 1788 * @taddr_in: Mode Address for Test Interface. 1789 * Specifies the register address for writing to or 1790 * reading from the PHY test interface register. 1791 * @tdata_in: Internal Testing Register Input Data and Select 1792 * This is a test bus. Data is present on [3:0], 1793 * and its corresponding select (enable) is present 1794 * on bits [7:4]. 1795 * @ate_reset: Reset input from automatic test equipment. 1796 * This is a test signal. When the USB Core is 1797 * powered up (not in Susned Mode), an automatic 1798 * tester can use this to disable phy_clock and 1799 * free_clk, then re-eanable them with an aligned 1800 * phase. 1801 * '1': The phy_clk and free_clk outputs are 1802 * disabled. "0": The phy_clock and free_clk outputs 1803 * are available within a specific period after the 1804 * de-assertion. 1805 */ 1806 struct cvmx_usbnx_usbp_ctl_status_s { 1807 __BITFIELD_FIELD(u64 txrisetune : 1, 1808 __BITFIELD_FIELD(u64 txvreftune : 4, 1809 __BITFIELD_FIELD(u64 txfslstune : 4, 1810 __BITFIELD_FIELD(u64 txhsxvtune : 2, 1811 __BITFIELD_FIELD(u64 sqrxtune : 3, 1812 __BITFIELD_FIELD(u64 compdistune : 3, 1813 __BITFIELD_FIELD(u64 otgtune : 3, 1814 __BITFIELD_FIELD(u64 otgdisable : 1, 1815 __BITFIELD_FIELD(u64 portreset : 1, 1816 __BITFIELD_FIELD(u64 drvvbus : 1, 1817 __BITFIELD_FIELD(u64 lsbist : 1, 1818 __BITFIELD_FIELD(u64 fsbist : 1, 1819 __BITFIELD_FIELD(u64 hsbist : 1, 1820 __BITFIELD_FIELD(u64 bist_done : 1, 1821 __BITFIELD_FIELD(u64 bist_err : 1, 1822 __BITFIELD_FIELD(u64 tdata_out : 4, 1823 __BITFIELD_FIELD(u64 siddq : 1, 1824 __BITFIELD_FIELD(u64 txpreemphasistune : 1, 1825 __BITFIELD_FIELD(u64 dma_bmode : 1, 1826 __BITFIELD_FIELD(u64 usbc_end : 1, 1827 __BITFIELD_FIELD(u64 usbp_bist : 1, 1828 __BITFIELD_FIELD(u64 tclk : 1, 1829 __BITFIELD_FIELD(u64 dp_pulld : 1, 1830 __BITFIELD_FIELD(u64 dm_pulld : 1, 1831 __BITFIELD_FIELD(u64 hst_mode : 1, 1832 __BITFIELD_FIELD(u64 tuning : 4, 1833 __BITFIELD_FIELD(u64 tx_bs_enh : 1, 1834 __BITFIELD_FIELD(u64 tx_bs_en : 1, 1835 __BITFIELD_FIELD(u64 loop_enb : 1, 1836 __BITFIELD_FIELD(u64 vtest_enb : 1, 1837 __BITFIELD_FIELD(u64 bist_enb : 1, 1838 __BITFIELD_FIELD(u64 tdata_sel : 1, 1839 __BITFIELD_FIELD(u64 taddr_in : 4, 1840 __BITFIELD_FIELD(u64 tdata_in : 8, 1841 __BITFIELD_FIELD(u64 ate_reset : 1, 1842 ;))))))))))))))))))))))))))))))))))) 1843 } s; 1844}; 1845 1846#endif /* __OCTEON_HCD_H__ */ 1847