linux/drivers/usb/chipidea/core.c
<<
>>
Prefs
   1/*
   2 * core.c - ChipIdea USB IP core family device controller
   3 *
   4 * Copyright (C) 2008 Chipidea - MIPS Technologies, Inc. All rights reserved.
   5 *
   6 * Author: David Lopo
   7 *
   8 * This program is free software; you can redistribute it and/or modify
   9 * it under the terms of the GNU General Public License version 2 as
  10 * published by the Free Software Foundation.
  11 */
  12
  13/*
  14 * Description: ChipIdea USB IP core family device controller
  15 *
  16 * This driver is composed of several blocks:
  17 * - HW:     hardware interface
  18 * - DBG:    debug facilities (optional)
  19 * - UTIL:   utilities
  20 * - ISR:    interrupts handling
  21 * - ENDPT:  endpoint operations (Gadget API)
  22 * - GADGET: gadget operations (Gadget API)
  23 * - BUS:    bus glue code, bus abstraction layer
  24 *
  25 * Compile Options
  26 * - STALL_IN:  non-empty bulk-in pipes cannot be halted
  27 *              if defined mass storage compliance succeeds but with warnings
  28 *              => case 4: Hi >  Dn
  29 *              => case 5: Hi >  Di
  30 *              => case 8: Hi <> Do
  31 *              if undefined usbtest 13 fails
  32 * - TRACE:     enable function tracing (depends on DEBUG)
  33 *
  34 * Main Features
  35 * - Chapter 9 & Mass Storage Compliance with Gadget File Storage
  36 * - Chapter 9 Compliance with Gadget Zero (STALL_IN undefined)
  37 * - Normal & LPM support
  38 *
  39 * USBTEST Report
  40 * - OK: 0-12, 13 (STALL_IN defined) & 14
  41 * - Not Supported: 15 & 16 (ISO)
  42 *
  43 * TODO List
  44 * - Suspend & Remote Wakeup
  45 */
  46#include <linux/delay.h>
  47#include <linux/device.h>
  48#include <linux/dma-mapping.h>
  49#include <linux/extcon.h>
  50#include <linux/phy/phy.h>
  51#include <linux/platform_device.h>
  52#include <linux/module.h>
  53#include <linux/idr.h>
  54#include <linux/interrupt.h>
  55#include <linux/io.h>
  56#include <linux/kernel.h>
  57#include <linux/slab.h>
  58#include <linux/pm_runtime.h>
  59#include <linux/usb/ch9.h>
  60#include <linux/usb/gadget.h>
  61#include <linux/usb/otg.h>
  62#include <linux/usb/chipidea.h>
  63#include <linux/usb/of.h>
  64#include <linux/of.h>
  65#include <linux/phy.h>
  66#include <linux/regulator/consumer.h>
  67#include <linux/usb/ehci_def.h>
  68
  69#include "ci.h"
  70#include "udc.h"
  71#include "bits.h"
  72#include "host.h"
  73#include "otg.h"
  74#include "otg_fsm.h"
  75
  76/* Controller register map */
  77static const u8 ci_regs_nolpm[] = {
  78        [CAP_CAPLENGTH]         = 0x00U,
  79        [CAP_HCCPARAMS]         = 0x08U,
  80        [CAP_DCCPARAMS]         = 0x24U,
  81        [CAP_TESTMODE]          = 0x38U,
  82        [OP_USBCMD]             = 0x00U,
  83        [OP_USBSTS]             = 0x04U,
  84        [OP_USBINTR]            = 0x08U,
  85        [OP_DEVICEADDR]         = 0x14U,
  86        [OP_ENDPTLISTADDR]      = 0x18U,
  87        [OP_TTCTRL]             = 0x1CU,
  88        [OP_BURSTSIZE]          = 0x20U,
  89        [OP_PORTSC]             = 0x44U,
  90        [OP_DEVLC]              = 0x84U,
  91        [OP_OTGSC]              = 0x64U,
  92        [OP_USBMODE]            = 0x68U,
  93        [OP_ENDPTSETUPSTAT]     = 0x6CU,
  94        [OP_ENDPTPRIME]         = 0x70U,
  95        [OP_ENDPTFLUSH]         = 0x74U,
  96        [OP_ENDPTSTAT]          = 0x78U,
  97        [OP_ENDPTCOMPLETE]      = 0x7CU,
  98        [OP_ENDPTCTRL]          = 0x80U,
  99};
 100
 101static const u8 ci_regs_lpm[] = {
 102        [CAP_CAPLENGTH]         = 0x00U,
 103        [CAP_HCCPARAMS]         = 0x08U,
 104        [CAP_DCCPARAMS]         = 0x24U,
 105        [CAP_TESTMODE]          = 0xFCU,
 106        [OP_USBCMD]             = 0x00U,
 107        [OP_USBSTS]             = 0x04U,
 108        [OP_USBINTR]            = 0x08U,
 109        [OP_DEVICEADDR]         = 0x14U,
 110        [OP_ENDPTLISTADDR]      = 0x18U,
 111        [OP_TTCTRL]             = 0x1CU,
 112        [OP_BURSTSIZE]          = 0x20U,
 113        [OP_PORTSC]             = 0x44U,
 114        [OP_DEVLC]              = 0x84U,
 115        [OP_OTGSC]              = 0xC4U,
 116        [OP_USBMODE]            = 0xC8U,
 117        [OP_ENDPTSETUPSTAT]     = 0xD8U,
 118        [OP_ENDPTPRIME]         = 0xDCU,
 119        [OP_ENDPTFLUSH]         = 0xE0U,
 120        [OP_ENDPTSTAT]          = 0xE4U,
 121        [OP_ENDPTCOMPLETE]      = 0xE8U,
 122        [OP_ENDPTCTRL]          = 0xECU,
 123};
 124
 125static void hw_alloc_regmap(struct ci_hdrc *ci, bool is_lpm)
 126{
 127        int i;
 128
 129        for (i = 0; i < OP_ENDPTCTRL; i++)
 130                ci->hw_bank.regmap[i] =
 131                        (i <= CAP_LAST ? ci->hw_bank.cap : ci->hw_bank.op) +
 132                        (is_lpm ? ci_regs_lpm[i] : ci_regs_nolpm[i]);
 133
 134        for (; i <= OP_LAST; i++)
 135                ci->hw_bank.regmap[i] = ci->hw_bank.op +
 136                        4 * (i - OP_ENDPTCTRL) +
 137                        (is_lpm
 138                         ? ci_regs_lpm[OP_ENDPTCTRL]
 139                         : ci_regs_nolpm[OP_ENDPTCTRL]);
 140
 141}
 142
 143static enum ci_revision ci_get_revision(struct ci_hdrc *ci)
 144{
 145        int ver = hw_read_id_reg(ci, ID_ID, VERSION) >> __ffs(VERSION);
 146        enum ci_revision rev = CI_REVISION_UNKNOWN;
 147
 148        if (ver == 0x2) {
 149                rev = hw_read_id_reg(ci, ID_ID, REVISION)
 150                        >> __ffs(REVISION);
 151                rev += CI_REVISION_20;
 152        } else if (ver == 0x0) {
 153                rev = CI_REVISION_1X;
 154        }
 155
 156        return rev;
 157}
 158
 159/**
 160 * hw_read_intr_enable: returns interrupt enable register
 161 *
 162 * @ci: the controller
 163 *
 164 * This function returns register data
 165 */
 166u32 hw_read_intr_enable(struct ci_hdrc *ci)
 167{
 168        return hw_read(ci, OP_USBINTR, ~0);
 169}
 170
 171/**
 172 * hw_read_intr_status: returns interrupt status register
 173 *
 174 * @ci: the controller
 175 *
 176 * This function returns register data
 177 */
 178u32 hw_read_intr_status(struct ci_hdrc *ci)
 179{
 180        return hw_read(ci, OP_USBSTS, ~0);
 181}
 182
 183/**
 184 * hw_port_test_set: writes port test mode (execute without interruption)
 185 * @mode: new value
 186 *
 187 * This function returns an error code
 188 */
 189int hw_port_test_set(struct ci_hdrc *ci, u8 mode)
 190{
 191        const u8 TEST_MODE_MAX = 7;
 192
 193        if (mode > TEST_MODE_MAX)
 194                return -EINVAL;
 195
 196        hw_write(ci, OP_PORTSC, PORTSC_PTC, mode << __ffs(PORTSC_PTC));
 197        return 0;
 198}
 199
 200/**
 201 * hw_port_test_get: reads port test mode value
 202 *
 203 * @ci: the controller
 204 *
 205 * This function returns port test mode value
 206 */
 207u8 hw_port_test_get(struct ci_hdrc *ci)
 208{
 209        return hw_read(ci, OP_PORTSC, PORTSC_PTC) >> __ffs(PORTSC_PTC);
 210}
 211
 212static void hw_wait_phy_stable(void)
 213{
 214        /*
 215         * The phy needs some delay to output the stable status from low
 216         * power mode. And for OTGSC, the status inputs are debounced
 217         * using a 1 ms time constant, so, delay 2ms for controller to get
 218         * the stable status, like vbus and id when the phy leaves low power.
 219         */
 220        usleep_range(2000, 2500);
 221}
 222
 223/* The PHY enters/leaves low power mode */
 224static void ci_hdrc_enter_lpm(struct ci_hdrc *ci, bool enable)
 225{
 226        enum ci_hw_regs reg = ci->hw_bank.lpm ? OP_DEVLC : OP_PORTSC;
 227        bool lpm = !!(hw_read(ci, reg, PORTSC_PHCD(ci->hw_bank.lpm)));
 228
 229        if (enable && !lpm)
 230                hw_write(ci, reg, PORTSC_PHCD(ci->hw_bank.lpm),
 231                                PORTSC_PHCD(ci->hw_bank.lpm));
 232        else if (!enable && lpm)
 233                hw_write(ci, reg, PORTSC_PHCD(ci->hw_bank.lpm),
 234                                0);
 235}
 236
 237static int hw_device_init(struct ci_hdrc *ci, void __iomem *base)
 238{
 239        u32 reg;
 240
 241        /* bank is a module variable */
 242        ci->hw_bank.abs = base;
 243
 244        ci->hw_bank.cap = ci->hw_bank.abs;
 245        ci->hw_bank.cap += ci->platdata->capoffset;
 246        ci->hw_bank.op = ci->hw_bank.cap + (ioread32(ci->hw_bank.cap) & 0xff);
 247
 248        hw_alloc_regmap(ci, false);
 249        reg = hw_read(ci, CAP_HCCPARAMS, HCCPARAMS_LEN) >>
 250                __ffs(HCCPARAMS_LEN);
 251        ci->hw_bank.lpm  = reg;
 252        if (reg)
 253                hw_alloc_regmap(ci, !!reg);
 254        ci->hw_bank.size = ci->hw_bank.op - ci->hw_bank.abs;
 255        ci->hw_bank.size += OP_LAST;
 256        ci->hw_bank.size /= sizeof(u32);
 257
 258        reg = hw_read(ci, CAP_DCCPARAMS, DCCPARAMS_DEN) >>
 259                __ffs(DCCPARAMS_DEN);
 260        ci->hw_ep_max = reg * 2;   /* cache hw ENDPT_MAX */
 261
 262        if (ci->hw_ep_max > ENDPT_MAX)
 263                return -ENODEV;
 264
 265        ci_hdrc_enter_lpm(ci, false);
 266
 267        /* Disable all interrupts bits */
 268        hw_write(ci, OP_USBINTR, 0xffffffff, 0);
 269
 270        /* Clear all interrupts status bits*/
 271        hw_write(ci, OP_USBSTS, 0xffffffff, 0xffffffff);
 272
 273        ci->rev = ci_get_revision(ci);
 274
 275        dev_dbg(ci->dev,
 276                "ChipIdea HDRC found, revision: %d, lpm: %d; cap: %p op: %p\n",
 277                ci->rev, ci->hw_bank.lpm, ci->hw_bank.cap, ci->hw_bank.op);
 278
 279        /* setup lock mode ? */
 280
 281        /* ENDPTSETUPSTAT is '0' by default */
 282
 283        /* HCSPARAMS.bf.ppc SHOULD BE zero for device */
 284
 285        return 0;
 286}
 287
 288static void hw_phymode_configure(struct ci_hdrc *ci)
 289{
 290        u32 portsc, lpm, sts = 0;
 291
 292        switch (ci->platdata->phy_mode) {
 293        case USBPHY_INTERFACE_MODE_UTMI:
 294                portsc = PORTSC_PTS(PTS_UTMI);
 295                lpm = DEVLC_PTS(PTS_UTMI);
 296                break;
 297        case USBPHY_INTERFACE_MODE_UTMIW:
 298                portsc = PORTSC_PTS(PTS_UTMI) | PORTSC_PTW;
 299                lpm = DEVLC_PTS(PTS_UTMI) | DEVLC_PTW;
 300                break;
 301        case USBPHY_INTERFACE_MODE_ULPI:
 302                portsc = PORTSC_PTS(PTS_ULPI);
 303                lpm = DEVLC_PTS(PTS_ULPI);
 304                break;
 305        case USBPHY_INTERFACE_MODE_SERIAL:
 306                portsc = PORTSC_PTS(PTS_SERIAL);
 307                lpm = DEVLC_PTS(PTS_SERIAL);
 308                sts = 1;
 309                break;
 310        case USBPHY_INTERFACE_MODE_HSIC:
 311                portsc = PORTSC_PTS(PTS_HSIC);
 312                lpm = DEVLC_PTS(PTS_HSIC);
 313                break;
 314        default:
 315                return;
 316        }
 317
 318        if (ci->hw_bank.lpm) {
 319                hw_write(ci, OP_DEVLC, DEVLC_PTS(7) | DEVLC_PTW, lpm);
 320                if (sts)
 321                        hw_write(ci, OP_DEVLC, DEVLC_STS, DEVLC_STS);
 322        } else {
 323                hw_write(ci, OP_PORTSC, PORTSC_PTS(7) | PORTSC_PTW, portsc);
 324                if (sts)
 325                        hw_write(ci, OP_PORTSC, PORTSC_STS, PORTSC_STS);
 326        }
 327}
 328
 329/**
 330 * _ci_usb_phy_init: initialize phy taking in account both phy and usb_phy
 331 * interfaces
 332 * @ci: the controller
 333 *
 334 * This function returns an error code if the phy failed to init
 335 */
 336static int _ci_usb_phy_init(struct ci_hdrc *ci)
 337{
 338        int ret;
 339
 340        if (ci->phy) {
 341                ret = phy_init(ci->phy);
 342                if (ret)
 343                        return ret;
 344
 345                ret = phy_power_on(ci->phy);
 346                if (ret) {
 347                        phy_exit(ci->phy);
 348                        return ret;
 349                }
 350        } else {
 351                ret = usb_phy_init(ci->usb_phy);
 352        }
 353
 354        return ret;
 355}
 356
 357/**
 358 * _ci_usb_phy_exit: deinitialize phy taking in account both phy and usb_phy
 359 * interfaces
 360 * @ci: the controller
 361 */
 362static void ci_usb_phy_exit(struct ci_hdrc *ci)
 363{
 364        if (ci->phy) {
 365                phy_power_off(ci->phy);
 366                phy_exit(ci->phy);
 367        } else {
 368                usb_phy_shutdown(ci->usb_phy);
 369        }
 370}
 371
 372/**
 373 * ci_usb_phy_init: initialize phy according to different phy type
 374 * @ci: the controller
 375 *
 376 * This function returns an error code if usb_phy_init has failed
 377 */
 378static int ci_usb_phy_init(struct ci_hdrc *ci)
 379{
 380        int ret;
 381
 382        switch (ci->platdata->phy_mode) {
 383        case USBPHY_INTERFACE_MODE_UTMI:
 384        case USBPHY_INTERFACE_MODE_UTMIW:
 385        case USBPHY_INTERFACE_MODE_HSIC:
 386                ret = _ci_usb_phy_init(ci);
 387                if (!ret)
 388                        hw_wait_phy_stable();
 389                else
 390                        return ret;
 391                hw_phymode_configure(ci);
 392                break;
 393        case USBPHY_INTERFACE_MODE_ULPI:
 394        case USBPHY_INTERFACE_MODE_SERIAL:
 395                hw_phymode_configure(ci);
 396                ret = _ci_usb_phy_init(ci);
 397                if (ret)
 398                        return ret;
 399                break;
 400        default:
 401                ret = _ci_usb_phy_init(ci);
 402                if (!ret)
 403                        hw_wait_phy_stable();
 404        }
 405
 406        return ret;
 407}
 408
 409
 410/**
 411 * ci_platform_configure: do controller configure
 412 * @ci: the controller
 413 *
 414 */
 415void ci_platform_configure(struct ci_hdrc *ci)
 416{
 417        bool is_device_mode, is_host_mode;
 418
 419        is_device_mode = hw_read(ci, OP_USBMODE, USBMODE_CM) == USBMODE_CM_DC;
 420        is_host_mode = hw_read(ci, OP_USBMODE, USBMODE_CM) == USBMODE_CM_HC;
 421
 422        if (is_device_mode &&
 423                (ci->platdata->flags & CI_HDRC_DISABLE_DEVICE_STREAMING))
 424                hw_write(ci, OP_USBMODE, USBMODE_CI_SDIS, USBMODE_CI_SDIS);
 425
 426        if (is_host_mode &&
 427                (ci->platdata->flags & CI_HDRC_DISABLE_HOST_STREAMING))
 428                hw_write(ci, OP_USBMODE, USBMODE_CI_SDIS, USBMODE_CI_SDIS);
 429
 430        if (ci->platdata->flags & CI_HDRC_FORCE_FULLSPEED) {
 431                if (ci->hw_bank.lpm)
 432                        hw_write(ci, OP_DEVLC, DEVLC_PFSC, DEVLC_PFSC);
 433                else
 434                        hw_write(ci, OP_PORTSC, PORTSC_PFSC, PORTSC_PFSC);
 435        }
 436
 437        if (ci->platdata->flags & CI_HDRC_SET_NON_ZERO_TTHA)
 438                hw_write(ci, OP_TTCTRL, TTCTRL_TTHA_MASK, TTCTRL_TTHA);
 439
 440        hw_write(ci, OP_USBCMD, 0xff0000, ci->platdata->itc_setting << 16);
 441
 442        if (ci->platdata->flags & CI_HDRC_OVERRIDE_AHB_BURST)
 443                hw_write_id_reg(ci, ID_SBUSCFG, AHBBRST_MASK,
 444                        ci->platdata->ahb_burst_config);
 445
 446        /* override burst size, take effect only when ahb_burst_config is 0 */
 447        if (!hw_read_id_reg(ci, ID_SBUSCFG, AHBBRST_MASK)) {
 448                if (ci->platdata->flags & CI_HDRC_OVERRIDE_TX_BURST)
 449                        hw_write(ci, OP_BURSTSIZE, TX_BURST_MASK,
 450                        ci->platdata->tx_burst_size << __ffs(TX_BURST_MASK));
 451
 452                if (ci->platdata->flags & CI_HDRC_OVERRIDE_RX_BURST)
 453                        hw_write(ci, OP_BURSTSIZE, RX_BURST_MASK,
 454                                ci->platdata->rx_burst_size);
 455        }
 456}
 457
 458/**
 459 * hw_controller_reset: do controller reset
 460 * @ci: the controller
 461  *
 462 * This function returns an error code
 463 */
 464static int hw_controller_reset(struct ci_hdrc *ci)
 465{
 466        int count = 0;
 467
 468        hw_write(ci, OP_USBCMD, USBCMD_RST, USBCMD_RST);
 469        while (hw_read(ci, OP_USBCMD, USBCMD_RST)) {
 470                udelay(10);
 471                if (count++ > 1000)
 472                        return -ETIMEDOUT;
 473        }
 474
 475        return 0;
 476}
 477
 478/**
 479 * hw_device_reset: resets chip (execute without interruption)
 480 * @ci: the controller
 481 *
 482 * This function returns an error code
 483 */
 484int hw_device_reset(struct ci_hdrc *ci)
 485{
 486        int ret;
 487
 488        /* should flush & stop before reset */
 489        hw_write(ci, OP_ENDPTFLUSH, ~0, ~0);
 490        hw_write(ci, OP_USBCMD, USBCMD_RS, 0);
 491
 492        ret = hw_controller_reset(ci);
 493        if (ret) {
 494                dev_err(ci->dev, "error resetting controller, ret=%d\n", ret);
 495                return ret;
 496        }
 497
 498        if (ci->platdata->notify_event)
 499                ci->platdata->notify_event(ci,
 500                        CI_HDRC_CONTROLLER_RESET_EVENT);
 501
 502        /* USBMODE should be configured step by step */
 503        hw_write(ci, OP_USBMODE, USBMODE_CM, USBMODE_CM_IDLE);
 504        hw_write(ci, OP_USBMODE, USBMODE_CM, USBMODE_CM_DC);
 505        /* HW >= 2.3 */
 506        hw_write(ci, OP_USBMODE, USBMODE_SLOM, USBMODE_SLOM);
 507
 508        if (hw_read(ci, OP_USBMODE, USBMODE_CM) != USBMODE_CM_DC) {
 509                pr_err("cannot enter in %s device mode", ci_role(ci)->name);
 510                pr_err("lpm = %i", ci->hw_bank.lpm);
 511                return -ENODEV;
 512        }
 513
 514        ci_platform_configure(ci);
 515
 516        return 0;
 517}
 518
 519/**
 520 * hw_wait_reg: wait the register value
 521 *
 522 * Sometimes, it needs to wait register value before going on.
 523 * Eg, when switch to device mode, the vbus value should be lower
 524 * than OTGSC_BSV before connects to host.
 525 *
 526 * @ci: the controller
 527 * @reg: register index
 528 * @mask: mast bit
 529 * @value: the bit value to wait
 530 * @timeout_ms: timeout in millisecond
 531 *
 532 * This function returns an error code if timeout
 533 */
 534int hw_wait_reg(struct ci_hdrc *ci, enum ci_hw_regs reg, u32 mask,
 535                                u32 value, unsigned int timeout_ms)
 536{
 537        unsigned long elapse = jiffies + msecs_to_jiffies(timeout_ms);
 538
 539        while (hw_read(ci, reg, mask) != value) {
 540                if (time_after(jiffies, elapse)) {
 541                        dev_err(ci->dev, "timeout waiting for %08x in %d\n",
 542                                        mask, reg);
 543                        return -ETIMEDOUT;
 544                }
 545                msleep(20);
 546        }
 547
 548        return 0;
 549}
 550
 551static irqreturn_t ci_irq(int irq, void *data)
 552{
 553        struct ci_hdrc *ci = data;
 554        irqreturn_t ret = IRQ_NONE;
 555        u32 otgsc = 0;
 556
 557        if (ci->in_lpm) {
 558                disable_irq_nosync(irq);
 559                ci->wakeup_int = true;
 560                pm_runtime_get(ci->dev);
 561                return IRQ_HANDLED;
 562        }
 563
 564        if (ci->is_otg) {
 565                otgsc = hw_read_otgsc(ci, ~0);
 566                if (ci_otg_is_fsm_mode(ci)) {
 567                        ret = ci_otg_fsm_irq(ci);
 568                        if (ret == IRQ_HANDLED)
 569                                return ret;
 570                }
 571        }
 572
 573        /*
 574         * Handle id change interrupt, it indicates device/host function
 575         * switch.
 576         */
 577        if (ci->is_otg && (otgsc & OTGSC_IDIE) && (otgsc & OTGSC_IDIS)) {
 578                ci->id_event = true;
 579                /* Clear ID change irq status */
 580                hw_write_otgsc(ci, OTGSC_IDIS, OTGSC_IDIS);
 581                ci_otg_queue_work(ci);
 582                return IRQ_HANDLED;
 583        }
 584
 585        /*
 586         * Handle vbus change interrupt, it indicates device connection
 587         * and disconnection events.
 588         */
 589        if (ci->is_otg && (otgsc & OTGSC_BSVIE) && (otgsc & OTGSC_BSVIS)) {
 590                ci->b_sess_valid_event = true;
 591                /* Clear BSV irq */
 592                hw_write_otgsc(ci, OTGSC_BSVIS, OTGSC_BSVIS);
 593                ci_otg_queue_work(ci);
 594                return IRQ_HANDLED;
 595        }
 596
 597        /* Handle device/host interrupt */
 598        if (ci->role != CI_ROLE_END)
 599                ret = ci_role(ci)->irq(ci);
 600
 601        return ret;
 602}
 603
 604static int ci_vbus_notifier(struct notifier_block *nb, unsigned long event,
 605                            void *ptr)
 606{
 607        struct ci_hdrc_cable *vbus = container_of(nb, struct ci_hdrc_cable, nb);
 608        struct ci_hdrc *ci = vbus->ci;
 609
 610        if (event)
 611                vbus->state = true;
 612        else
 613                vbus->state = false;
 614
 615        vbus->changed = true;
 616
 617        ci_irq(ci->irq, ci);
 618        return NOTIFY_DONE;
 619}
 620
 621static int ci_id_notifier(struct notifier_block *nb, unsigned long event,
 622                          void *ptr)
 623{
 624        struct ci_hdrc_cable *id = container_of(nb, struct ci_hdrc_cable, nb);
 625        struct ci_hdrc *ci = id->ci;
 626
 627        if (event)
 628                id->state = false;
 629        else
 630                id->state = true;
 631
 632        id->changed = true;
 633
 634        ci_irq(ci->irq, ci);
 635        return NOTIFY_DONE;
 636}
 637
 638static int ci_get_platdata(struct device *dev,
 639                struct ci_hdrc_platform_data *platdata)
 640{
 641        struct extcon_dev *ext_vbus, *ext_id;
 642        struct ci_hdrc_cable *cable;
 643        int ret;
 644
 645        if (!platdata->phy_mode)
 646                platdata->phy_mode = of_usb_get_phy_mode(dev->of_node);
 647
 648        if (!platdata->dr_mode)
 649                platdata->dr_mode = usb_get_dr_mode(dev);
 650
 651        if (platdata->dr_mode == USB_DR_MODE_UNKNOWN)
 652                platdata->dr_mode = USB_DR_MODE_OTG;
 653
 654        if (platdata->dr_mode != USB_DR_MODE_PERIPHERAL) {
 655                /* Get the vbus regulator */
 656                platdata->reg_vbus = devm_regulator_get(dev, "vbus");
 657                if (PTR_ERR(platdata->reg_vbus) == -EPROBE_DEFER) {
 658                        return -EPROBE_DEFER;
 659                } else if (PTR_ERR(platdata->reg_vbus) == -ENODEV) {
 660                        /* no vbus regulator is needed */
 661                        platdata->reg_vbus = NULL;
 662                } else if (IS_ERR(platdata->reg_vbus)) {
 663                        dev_err(dev, "Getting regulator error: %ld\n",
 664                                PTR_ERR(platdata->reg_vbus));
 665                        return PTR_ERR(platdata->reg_vbus);
 666                }
 667                /* Get TPL support */
 668                if (!platdata->tpl_support)
 669                        platdata->tpl_support =
 670                                of_usb_host_tpl_support(dev->of_node);
 671        }
 672
 673        if (platdata->dr_mode == USB_DR_MODE_OTG) {
 674                /* We can support HNP and SRP of OTG 2.0 */
 675                platdata->ci_otg_caps.otg_rev = 0x0200;
 676                platdata->ci_otg_caps.hnp_support = true;
 677                platdata->ci_otg_caps.srp_support = true;
 678
 679                /* Update otg capabilities by DT properties */
 680                ret = of_usb_update_otg_caps(dev->of_node,
 681                                        &platdata->ci_otg_caps);
 682                if (ret)
 683                        return ret;
 684        }
 685
 686        if (usb_get_maximum_speed(dev) == USB_SPEED_FULL)
 687                platdata->flags |= CI_HDRC_FORCE_FULLSPEED;
 688
 689        of_property_read_u32(dev->of_node, "phy-clkgate-delay-us",
 690                                     &platdata->phy_clkgate_delay_us);
 691
 692        platdata->itc_setting = 1;
 693
 694        of_property_read_u32(dev->of_node, "itc-setting",
 695                                        &platdata->itc_setting);
 696
 697        ret = of_property_read_u32(dev->of_node, "ahb-burst-config",
 698                                &platdata->ahb_burst_config);
 699        if (!ret) {
 700                platdata->flags |= CI_HDRC_OVERRIDE_AHB_BURST;
 701        } else if (ret != -EINVAL) {
 702                dev_err(dev, "failed to get ahb-burst-config\n");
 703                return ret;
 704        }
 705
 706        ret = of_property_read_u32(dev->of_node, "tx-burst-size-dword",
 707                                &platdata->tx_burst_size);
 708        if (!ret) {
 709                platdata->flags |= CI_HDRC_OVERRIDE_TX_BURST;
 710        } else if (ret != -EINVAL) {
 711                dev_err(dev, "failed to get tx-burst-size-dword\n");
 712                return ret;
 713        }
 714
 715        ret = of_property_read_u32(dev->of_node, "rx-burst-size-dword",
 716                                &platdata->rx_burst_size);
 717        if (!ret) {
 718                platdata->flags |= CI_HDRC_OVERRIDE_RX_BURST;
 719        } else if (ret != -EINVAL) {
 720                dev_err(dev, "failed to get rx-burst-size-dword\n");
 721                return ret;
 722        }
 723
 724        if (of_find_property(dev->of_node, "non-zero-ttctrl-ttha", NULL))
 725                platdata->flags |= CI_HDRC_SET_NON_ZERO_TTHA;
 726
 727        ext_id = ERR_PTR(-ENODEV);
 728        ext_vbus = ERR_PTR(-ENODEV);
 729        if (of_property_read_bool(dev->of_node, "extcon")) {
 730                /* Each one of them is not mandatory */
 731                ext_vbus = extcon_get_edev_by_phandle(dev, 0);
 732                if (IS_ERR(ext_vbus) && PTR_ERR(ext_vbus) != -ENODEV)
 733                        return PTR_ERR(ext_vbus);
 734
 735                ext_id = extcon_get_edev_by_phandle(dev, 1);
 736                if (IS_ERR(ext_id) && PTR_ERR(ext_id) != -ENODEV)
 737                        return PTR_ERR(ext_id);
 738        }
 739
 740        cable = &platdata->vbus_extcon;
 741        cable->nb.notifier_call = ci_vbus_notifier;
 742        cable->edev = ext_vbus;
 743
 744        if (!IS_ERR(ext_vbus)) {
 745                ret = extcon_get_cable_state_(cable->edev, EXTCON_USB);
 746                if (ret)
 747                        cable->state = true;
 748                else
 749                        cable->state = false;
 750        }
 751
 752        cable = &platdata->id_extcon;
 753        cable->nb.notifier_call = ci_id_notifier;
 754        cable->edev = ext_id;
 755
 756        if (!IS_ERR(ext_id)) {
 757                ret = extcon_get_cable_state_(cable->edev, EXTCON_USB_HOST);
 758                if (ret)
 759                        cable->state = false;
 760                else
 761                        cable->state = true;
 762        }
 763        return 0;
 764}
 765
 766static int ci_extcon_register(struct ci_hdrc *ci)
 767{
 768        struct ci_hdrc_cable *id, *vbus;
 769        int ret;
 770
 771        id = &ci->platdata->id_extcon;
 772        id->ci = ci;
 773        if (!IS_ERR(id->edev)) {
 774                ret = extcon_register_notifier(id->edev, EXTCON_USB_HOST,
 775                                               &id->nb);
 776                if (ret < 0) {
 777                        dev_err(ci->dev, "register ID failed\n");
 778                        return ret;
 779                }
 780        }
 781
 782        vbus = &ci->platdata->vbus_extcon;
 783        vbus->ci = ci;
 784        if (!IS_ERR(vbus->edev)) {
 785                ret = extcon_register_notifier(vbus->edev, EXTCON_USB,
 786                                               &vbus->nb);
 787                if (ret < 0) {
 788                        extcon_unregister_notifier(id->edev, EXTCON_USB_HOST,
 789                                                   &id->nb);
 790                        dev_err(ci->dev, "register VBUS failed\n");
 791                        return ret;
 792                }
 793        }
 794
 795        return 0;
 796}
 797
 798static void ci_extcon_unregister(struct ci_hdrc *ci)
 799{
 800        struct ci_hdrc_cable *cable;
 801
 802        cable = &ci->platdata->id_extcon;
 803        if (!IS_ERR(cable->edev))
 804                extcon_unregister_notifier(cable->edev, EXTCON_USB_HOST,
 805                                           &cable->nb);
 806
 807        cable = &ci->platdata->vbus_extcon;
 808        if (!IS_ERR(cable->edev))
 809                extcon_unregister_notifier(cable->edev, EXTCON_USB, &cable->nb);
 810}
 811
 812static DEFINE_IDA(ci_ida);
 813
 814struct platform_device *ci_hdrc_add_device(struct device *dev,
 815                        struct resource *res, int nres,
 816                        struct ci_hdrc_platform_data *platdata)
 817{
 818        struct platform_device *pdev;
 819        int id, ret;
 820
 821        ret = ci_get_platdata(dev, platdata);
 822        if (ret)
 823                return ERR_PTR(ret);
 824
 825        id = ida_simple_get(&ci_ida, 0, 0, GFP_KERNEL);
 826        if (id < 0)
 827                return ERR_PTR(id);
 828
 829        pdev = platform_device_alloc("ci_hdrc", id);
 830        if (!pdev) {
 831                ret = -ENOMEM;
 832                goto put_id;
 833        }
 834
 835        pdev->dev.parent = dev;
 836        pdev->dev.dma_mask = dev->dma_mask;
 837        pdev->dev.dma_parms = dev->dma_parms;
 838        dma_set_coherent_mask(&pdev->dev, dev->coherent_dma_mask);
 839
 840        ret = platform_device_add_resources(pdev, res, nres);
 841        if (ret)
 842                goto err;
 843
 844        ret = platform_device_add_data(pdev, platdata, sizeof(*platdata));
 845        if (ret)
 846                goto err;
 847
 848        ret = platform_device_add(pdev);
 849        if (ret)
 850                goto err;
 851
 852        return pdev;
 853
 854err:
 855        platform_device_put(pdev);
 856put_id:
 857        ida_simple_remove(&ci_ida, id);
 858        return ERR_PTR(ret);
 859}
 860EXPORT_SYMBOL_GPL(ci_hdrc_add_device);
 861
 862void ci_hdrc_remove_device(struct platform_device *pdev)
 863{
 864        int id = pdev->id;
 865        platform_device_unregister(pdev);
 866        ida_simple_remove(&ci_ida, id);
 867}
 868EXPORT_SYMBOL_GPL(ci_hdrc_remove_device);
 869
 870static inline void ci_role_destroy(struct ci_hdrc *ci)
 871{
 872        ci_hdrc_gadget_destroy(ci);
 873        ci_hdrc_host_destroy(ci);
 874        if (ci->is_otg)
 875                ci_hdrc_otg_destroy(ci);
 876}
 877
 878static void ci_get_otg_capable(struct ci_hdrc *ci)
 879{
 880        if (ci->platdata->flags & CI_HDRC_DUAL_ROLE_NOT_OTG)
 881                ci->is_otg = false;
 882        else
 883                ci->is_otg = (hw_read(ci, CAP_DCCPARAMS,
 884                                DCCPARAMS_DC | DCCPARAMS_HC)
 885                                        == (DCCPARAMS_DC | DCCPARAMS_HC));
 886        if (ci->is_otg) {
 887                dev_dbg(ci->dev, "It is OTG capable controller\n");
 888                /* Disable and clear all OTG irq */
 889                hw_write_otgsc(ci, OTGSC_INT_EN_BITS | OTGSC_INT_STATUS_BITS,
 890                                                        OTGSC_INT_STATUS_BITS);
 891        }
 892}
 893
 894static int ci_hdrc_probe(struct platform_device *pdev)
 895{
 896        struct device   *dev = &pdev->dev;
 897        struct ci_hdrc  *ci;
 898        struct resource *res;
 899        void __iomem    *base;
 900        int             ret;
 901        enum usb_dr_mode dr_mode;
 902
 903        if (!dev_get_platdata(dev)) {
 904                dev_err(dev, "platform data missing\n");
 905                return -ENODEV;
 906        }
 907
 908        res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 909        base = devm_ioremap_resource(dev, res);
 910        if (IS_ERR(base))
 911                return PTR_ERR(base);
 912
 913        ci = devm_kzalloc(dev, sizeof(*ci), GFP_KERNEL);
 914        if (!ci)
 915                return -ENOMEM;
 916
 917        ci->dev = dev;
 918        ci->platdata = dev_get_platdata(dev);
 919        ci->imx28_write_fix = !!(ci->platdata->flags &
 920                CI_HDRC_IMX28_WRITE_FIX);
 921        ci->supports_runtime_pm = !!(ci->platdata->flags &
 922                CI_HDRC_SUPPORTS_RUNTIME_PM);
 923
 924        ret = hw_device_init(ci, base);
 925        if (ret < 0) {
 926                dev_err(dev, "can't initialize hardware\n");
 927                return -ENODEV;
 928        }
 929
 930        if (ci->platdata->phy) {
 931                ci->phy = ci->platdata->phy;
 932        } else if (ci->platdata->usb_phy) {
 933                ci->usb_phy = ci->platdata->usb_phy;
 934        } else {
 935                ci->phy = devm_phy_get(dev->parent, "usb-phy");
 936                ci->usb_phy = devm_usb_get_phy(dev->parent, USB_PHY_TYPE_USB2);
 937
 938                /* if both generic PHY and USB PHY layers aren't enabled */
 939                if (PTR_ERR(ci->phy) == -ENOSYS &&
 940                                PTR_ERR(ci->usb_phy) == -ENXIO)
 941                        return -ENXIO;
 942
 943                if (IS_ERR(ci->phy) && IS_ERR(ci->usb_phy))
 944                        return -EPROBE_DEFER;
 945
 946                if (IS_ERR(ci->phy))
 947                        ci->phy = NULL;
 948                else if (IS_ERR(ci->usb_phy))
 949                        ci->usb_phy = NULL;
 950        }
 951
 952        ret = ci_usb_phy_init(ci);
 953        if (ret) {
 954                dev_err(dev, "unable to init phy: %d\n", ret);
 955                return ret;
 956        }
 957
 958        ci->hw_bank.phys = res->start;
 959
 960        ci->irq = platform_get_irq(pdev, 0);
 961        if (ci->irq < 0) {
 962                dev_err(dev, "missing IRQ\n");
 963                ret = ci->irq;
 964                goto deinit_phy;
 965        }
 966
 967        ci_get_otg_capable(ci);
 968
 969        dr_mode = ci->platdata->dr_mode;
 970        /* initialize role(s) before the interrupt is requested */
 971        if (dr_mode == USB_DR_MODE_OTG || dr_mode == USB_DR_MODE_HOST) {
 972                ret = ci_hdrc_host_init(ci);
 973                if (ret)
 974                        dev_info(dev, "doesn't support host\n");
 975        }
 976
 977        if (dr_mode == USB_DR_MODE_OTG || dr_mode == USB_DR_MODE_PERIPHERAL) {
 978                ret = ci_hdrc_gadget_init(ci);
 979                if (ret)
 980                        dev_info(dev, "doesn't support gadget\n");
 981        }
 982
 983        if (!ci->roles[CI_ROLE_HOST] && !ci->roles[CI_ROLE_GADGET]) {
 984                dev_err(dev, "no supported roles\n");
 985                ret = -ENODEV;
 986                goto deinit_phy;
 987        }
 988
 989        if (ci->is_otg && ci->roles[CI_ROLE_GADGET]) {
 990                ret = ci_hdrc_otg_init(ci);
 991                if (ret) {
 992                        dev_err(dev, "init otg fails, ret = %d\n", ret);
 993                        goto stop;
 994                }
 995        }
 996
 997        if (ci->roles[CI_ROLE_HOST] && ci->roles[CI_ROLE_GADGET]) {
 998                if (ci->is_otg) {
 999                        ci->role = ci_otg_role(ci);
1000                        /* Enable ID change irq */
1001                        hw_write_otgsc(ci, OTGSC_IDIE, OTGSC_IDIE);
1002                } else {
1003                        /*
1004                         * If the controller is not OTG capable, but support
1005                         * role switch, the defalt role is gadget, and the
1006                         * user can switch it through debugfs.
1007                         */
1008                        ci->role = CI_ROLE_GADGET;
1009                }
1010        } else {
1011                ci->role = ci->roles[CI_ROLE_HOST]
1012                        ? CI_ROLE_HOST
1013                        : CI_ROLE_GADGET;
1014        }
1015
1016        if (!ci_otg_is_fsm_mode(ci)) {
1017                /* only update vbus status for peripheral */
1018                if (ci->role == CI_ROLE_GADGET)
1019                        ci_handle_vbus_change(ci);
1020
1021                ret = ci_role_start(ci, ci->role);
1022                if (ret) {
1023                        dev_err(dev, "can't start %s role\n",
1024                                                ci_role(ci)->name);
1025                        goto stop;
1026                }
1027        }
1028
1029        platform_set_drvdata(pdev, ci);
1030        ret = devm_request_irq(dev, ci->irq, ci_irq, IRQF_SHARED,
1031                        ci->platdata->name, ci);
1032        if (ret)
1033                goto stop;
1034
1035        ret = ci_extcon_register(ci);
1036        if (ret)
1037                goto stop;
1038
1039        if (ci->supports_runtime_pm) {
1040                pm_runtime_set_active(&pdev->dev);
1041                pm_runtime_enable(&pdev->dev);
1042                pm_runtime_set_autosuspend_delay(&pdev->dev, 2000);
1043                pm_runtime_mark_last_busy(ci->dev);
1044                pm_runtime_use_autosuspend(&pdev->dev);
1045        }
1046
1047        if (ci_otg_is_fsm_mode(ci))
1048                ci_hdrc_otg_fsm_start(ci);
1049
1050        device_set_wakeup_capable(&pdev->dev, true);
1051
1052        ret = dbg_create_files(ci);
1053        if (!ret)
1054                return 0;
1055
1056        ci_extcon_unregister(ci);
1057stop:
1058        ci_role_destroy(ci);
1059deinit_phy:
1060        ci_usb_phy_exit(ci);
1061
1062        return ret;
1063}
1064
1065static int ci_hdrc_remove(struct platform_device *pdev)
1066{
1067        struct ci_hdrc *ci = platform_get_drvdata(pdev);
1068
1069        if (ci->supports_runtime_pm) {
1070                pm_runtime_get_sync(&pdev->dev);
1071                pm_runtime_disable(&pdev->dev);
1072                pm_runtime_put_noidle(&pdev->dev);
1073        }
1074
1075        dbg_remove_files(ci);
1076        ci_extcon_unregister(ci);
1077        ci_role_destroy(ci);
1078        ci_hdrc_enter_lpm(ci, true);
1079        ci_usb_phy_exit(ci);
1080
1081        return 0;
1082}
1083
1084#ifdef CONFIG_PM
1085/* Prepare wakeup by SRP before suspend */
1086static void ci_otg_fsm_suspend_for_srp(struct ci_hdrc *ci)
1087{
1088        if ((ci->fsm.otg->state == OTG_STATE_A_IDLE) &&
1089                                !hw_read_otgsc(ci, OTGSC_ID)) {
1090                hw_write(ci, OP_PORTSC, PORTSC_W1C_BITS | PORTSC_PP,
1091                                                                PORTSC_PP);
1092                hw_write(ci, OP_PORTSC, PORTSC_W1C_BITS | PORTSC_WKCN,
1093                                                                PORTSC_WKCN);
1094        }
1095}
1096
1097/* Handle SRP when wakeup by data pulse */
1098static void ci_otg_fsm_wakeup_by_srp(struct ci_hdrc *ci)
1099{
1100        if ((ci->fsm.otg->state == OTG_STATE_A_IDLE) &&
1101                (ci->fsm.a_bus_drop == 1) && (ci->fsm.a_bus_req == 0)) {
1102                if (!hw_read_otgsc(ci, OTGSC_ID)) {
1103                        ci->fsm.a_srp_det = 1;
1104                        ci->fsm.a_bus_drop = 0;
1105                } else {
1106                        ci->fsm.id = 1;
1107                }
1108                ci_otg_queue_work(ci);
1109        }
1110}
1111
1112static void ci_controller_suspend(struct ci_hdrc *ci)
1113{
1114        disable_irq(ci->irq);
1115        ci_hdrc_enter_lpm(ci, true);
1116        if (ci->platdata->phy_clkgate_delay_us)
1117                usleep_range(ci->platdata->phy_clkgate_delay_us,
1118                             ci->platdata->phy_clkgate_delay_us + 50);
1119        usb_phy_set_suspend(ci->usb_phy, 1);
1120        ci->in_lpm = true;
1121        enable_irq(ci->irq);
1122}
1123
1124static int ci_controller_resume(struct device *dev)
1125{
1126        struct ci_hdrc *ci = dev_get_drvdata(dev);
1127
1128        dev_dbg(dev, "at %s\n", __func__);
1129
1130        if (!ci->in_lpm) {
1131                WARN_ON(1);
1132                return 0;
1133        }
1134
1135        ci_hdrc_enter_lpm(ci, false);
1136        if (ci->usb_phy) {
1137                usb_phy_set_suspend(ci->usb_phy, 0);
1138                usb_phy_set_wakeup(ci->usb_phy, false);
1139                hw_wait_phy_stable();
1140        }
1141
1142        ci->in_lpm = false;
1143        if (ci->wakeup_int) {
1144                ci->wakeup_int = false;
1145                pm_runtime_mark_last_busy(ci->dev);
1146                pm_runtime_put_autosuspend(ci->dev);
1147                enable_irq(ci->irq);
1148                if (ci_otg_is_fsm_mode(ci))
1149                        ci_otg_fsm_wakeup_by_srp(ci);
1150        }
1151
1152        return 0;
1153}
1154
1155#ifdef CONFIG_PM_SLEEP
1156static int ci_suspend(struct device *dev)
1157{
1158        struct ci_hdrc *ci = dev_get_drvdata(dev);
1159
1160        if (ci->wq)
1161                flush_workqueue(ci->wq);
1162        /*
1163         * Controller needs to be active during suspend, otherwise the core
1164         * may run resume when the parent is at suspend if other driver's
1165         * suspend fails, it occurs before parent's suspend has not started,
1166         * but the core suspend has finished.
1167         */
1168        if (ci->in_lpm)
1169                pm_runtime_resume(dev);
1170
1171        if (ci->in_lpm) {
1172                WARN_ON(1);
1173                return 0;
1174        }
1175
1176        if (device_may_wakeup(dev)) {
1177                if (ci_otg_is_fsm_mode(ci))
1178                        ci_otg_fsm_suspend_for_srp(ci);
1179
1180                usb_phy_set_wakeup(ci->usb_phy, true);
1181                enable_irq_wake(ci->irq);
1182        }
1183
1184        ci_controller_suspend(ci);
1185
1186        return 0;
1187}
1188
1189static int ci_resume(struct device *dev)
1190{
1191        struct ci_hdrc *ci = dev_get_drvdata(dev);
1192        int ret;
1193
1194        if (device_may_wakeup(dev))
1195                disable_irq_wake(ci->irq);
1196
1197        ret = ci_controller_resume(dev);
1198        if (ret)
1199                return ret;
1200
1201        if (ci->supports_runtime_pm) {
1202                pm_runtime_disable(dev);
1203                pm_runtime_set_active(dev);
1204                pm_runtime_enable(dev);
1205        }
1206
1207        return ret;
1208}
1209#endif /* CONFIG_PM_SLEEP */
1210
1211static int ci_runtime_suspend(struct device *dev)
1212{
1213        struct ci_hdrc *ci = dev_get_drvdata(dev);
1214
1215        dev_dbg(dev, "at %s\n", __func__);
1216
1217        if (ci->in_lpm) {
1218                WARN_ON(1);
1219                return 0;
1220        }
1221
1222        if (ci_otg_is_fsm_mode(ci))
1223                ci_otg_fsm_suspend_for_srp(ci);
1224
1225        usb_phy_set_wakeup(ci->usb_phy, true);
1226        ci_controller_suspend(ci);
1227
1228        return 0;
1229}
1230
1231static int ci_runtime_resume(struct device *dev)
1232{
1233        return ci_controller_resume(dev);
1234}
1235
1236#endif /* CONFIG_PM */
1237static const struct dev_pm_ops ci_pm_ops = {
1238        SET_SYSTEM_SLEEP_PM_OPS(ci_suspend, ci_resume)
1239        SET_RUNTIME_PM_OPS(ci_runtime_suspend, ci_runtime_resume, NULL)
1240};
1241
1242static struct platform_driver ci_hdrc_driver = {
1243        .probe  = ci_hdrc_probe,
1244        .remove = ci_hdrc_remove,
1245        .driver = {
1246                .name   = "ci_hdrc",
1247                .pm     = &ci_pm_ops,
1248        },
1249};
1250
1251static int __init ci_hdrc_platform_register(void)
1252{
1253        ci_hdrc_host_driver_init();
1254        return platform_driver_register(&ci_hdrc_driver);
1255}
1256module_init(ci_hdrc_platform_register);
1257
1258static void __exit ci_hdrc_platform_unregister(void)
1259{
1260        platform_driver_unregister(&ci_hdrc_driver);
1261}
1262module_exit(ci_hdrc_platform_unregister);
1263
1264MODULE_ALIAS("platform:ci_hdrc");
1265MODULE_LICENSE("GPL v2");
1266MODULE_AUTHOR("David Lopo <dlopo@chipidea.mips.com>");
1267MODULE_DESCRIPTION("ChipIdea HDRC Driver");
1268