linux/drivers/usb/dwc3/dwc3-pci.c
<<
>>
Prefs
   1/**
   2 * dwc3-pci.c - PCI Specific glue layer
   3 *
   4 * Copyright (C) 2010-2011 Texas Instruments Incorporated - http://www.ti.com
   5 *
   6 * Authors: Felipe Balbi <balbi@ti.com>,
   7 *          Sebastian Andrzej Siewior <bigeasy@linutronix.de>
   8 *
   9 * This program is free software: you can redistribute it and/or modify
  10 * it under the terms of the GNU General Public License version 2  of
  11 * the License as published by the Free Software Foundation.
  12 *
  13 * This program is distributed in the hope that it will be useful,
  14 * but WITHOUT ANY WARRANTY; without even the implied warranty of
  15 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  16 * GNU General Public License for more details.
  17 */
  18
  19#include <linux/kernel.h>
  20#include <linux/module.h>
  21#include <linux/slab.h>
  22#include <linux/pci.h>
  23#include <linux/platform_device.h>
  24#include <linux/gpio/consumer.h>
  25#include <linux/acpi.h>
  26
  27#include "platform_data.h"
  28
  29#define PCI_DEVICE_ID_SYNOPSYS_HAPSUSB3         0xabcd
  30#define PCI_DEVICE_ID_SYNOPSYS_HAPSUSB3_AXI     0xabce
  31#define PCI_DEVICE_ID_SYNOPSYS_HAPSUSB31        0xabcf
  32#define PCI_DEVICE_ID_INTEL_BYT                 0x0f37
  33#define PCI_DEVICE_ID_INTEL_MRFLD               0x119e
  34#define PCI_DEVICE_ID_INTEL_BSW                 0x22b7
  35#define PCI_DEVICE_ID_INTEL_SPTLP               0x9d30
  36#define PCI_DEVICE_ID_INTEL_SPTH                0xa130
  37#define PCI_DEVICE_ID_INTEL_BXT                 0x0aaa
  38#define PCI_DEVICE_ID_INTEL_BXT_M               0x1aaa
  39#define PCI_DEVICE_ID_INTEL_APL                 0x5aaa
  40
  41static const struct acpi_gpio_params reset_gpios = { 0, 0, false };
  42static const struct acpi_gpio_params cs_gpios = { 1, 0, false };
  43
  44static const struct acpi_gpio_mapping acpi_dwc3_byt_gpios[] = {
  45        { "reset-gpios", &reset_gpios, 1 },
  46        { "cs-gpios", &cs_gpios, 1 },
  47        { },
  48};
  49
  50static int dwc3_pci_quirks(struct pci_dev *pdev)
  51{
  52        if (pdev->vendor == PCI_VENDOR_ID_AMD &&
  53            pdev->device == PCI_DEVICE_ID_AMD_NL_USB) {
  54                struct dwc3_platform_data pdata;
  55
  56                memset(&pdata, 0, sizeof(pdata));
  57
  58                pdata.has_lpm_erratum = true;
  59                pdata.lpm_nyet_threshold = 0xf;
  60
  61                pdata.u2exit_lfps_quirk = true;
  62                pdata.u2ss_inp3_quirk = true;
  63                pdata.req_p1p2p3_quirk = true;
  64                pdata.del_p1p2p3_quirk = true;
  65                pdata.del_phy_power_chg_quirk = true;
  66                pdata.lfps_filter_quirk = true;
  67                pdata.rx_detect_poll_quirk = true;
  68
  69                pdata.tx_de_emphasis_quirk = true;
  70                pdata.tx_de_emphasis = 1;
  71
  72                /*
  73                 * FIXME these quirks should be removed when AMD NL
  74                 * taps out
  75                 */
  76                pdata.disable_scramble_quirk = true;
  77                pdata.dis_u3_susphy_quirk = true;
  78                pdata.dis_u2_susphy_quirk = true;
  79
  80                return platform_device_add_data(pci_get_drvdata(pdev), &pdata,
  81                                                sizeof(pdata));
  82        }
  83
  84        if (pdev->vendor == PCI_VENDOR_ID_INTEL &&
  85            pdev->device == PCI_DEVICE_ID_INTEL_BYT) {
  86                struct gpio_desc *gpio;
  87
  88                acpi_dev_add_driver_gpios(ACPI_COMPANION(&pdev->dev),
  89                                          acpi_dwc3_byt_gpios);
  90
  91                /*
  92                 * These GPIOs will turn on the USB2 PHY. Note that we have to
  93                 * put the gpio descriptors again here because the phy driver
  94                 * might want to grab them, too.
  95                 */
  96                gpio = gpiod_get_optional(&pdev->dev, "cs", GPIOD_OUT_LOW);
  97                if (IS_ERR(gpio))
  98                        return PTR_ERR(gpio);
  99
 100                gpiod_set_value_cansleep(gpio, 1);
 101                gpiod_put(gpio);
 102
 103                gpio = gpiod_get_optional(&pdev->dev, "reset", GPIOD_OUT_LOW);
 104                if (IS_ERR(gpio))
 105                        return PTR_ERR(gpio);
 106
 107                if (gpio) {
 108                        gpiod_set_value_cansleep(gpio, 1);
 109                        gpiod_put(gpio);
 110                        usleep_range(10000, 11000);
 111                }
 112        }
 113
 114        if (pdev->vendor == PCI_VENDOR_ID_SYNOPSYS &&
 115            (pdev->device == PCI_DEVICE_ID_SYNOPSYS_HAPSUSB3 ||
 116             pdev->device == PCI_DEVICE_ID_SYNOPSYS_HAPSUSB3_AXI ||
 117             pdev->device == PCI_DEVICE_ID_SYNOPSYS_HAPSUSB31)) {
 118
 119                struct dwc3_platform_data pdata;
 120
 121                memset(&pdata, 0, sizeof(pdata));
 122                pdata.usb3_lpm_capable = true;
 123                pdata.has_lpm_erratum = true;
 124                pdata.dis_enblslpm_quirk = true;
 125
 126                return platform_device_add_data(pci_get_drvdata(pdev), &pdata,
 127                                                sizeof(pdata));
 128        }
 129
 130        return 0;
 131}
 132
 133static int dwc3_pci_probe(struct pci_dev *pci,
 134                const struct pci_device_id *id)
 135{
 136        struct resource         res[2];
 137        struct platform_device  *dwc3;
 138        int                     ret;
 139        struct device           *dev = &pci->dev;
 140
 141        ret = pcim_enable_device(pci);
 142        if (ret) {
 143                dev_err(dev, "failed to enable pci device\n");
 144                return -ENODEV;
 145        }
 146
 147        pci_set_master(pci);
 148
 149        dwc3 = platform_device_alloc("dwc3", PLATFORM_DEVID_AUTO);
 150        if (!dwc3) {
 151                dev_err(dev, "couldn't allocate dwc3 device\n");
 152                return -ENOMEM;
 153        }
 154
 155        memset(res, 0x00, sizeof(struct resource) * ARRAY_SIZE(res));
 156
 157        res[0].start    = pci_resource_start(pci, 0);
 158        res[0].end      = pci_resource_end(pci, 0);
 159        res[0].name     = "dwc_usb3";
 160        res[0].flags    = IORESOURCE_MEM;
 161
 162        res[1].start    = pci->irq;
 163        res[1].name     = "dwc_usb3";
 164        res[1].flags    = IORESOURCE_IRQ;
 165
 166        ret = platform_device_add_resources(dwc3, res, ARRAY_SIZE(res));
 167        if (ret) {
 168                dev_err(dev, "couldn't add resources to dwc3 device\n");
 169                return ret;
 170        }
 171
 172        pci_set_drvdata(pci, dwc3);
 173        ret = dwc3_pci_quirks(pci);
 174        if (ret)
 175                goto err;
 176
 177        dwc3->dev.parent = dev;
 178        ACPI_COMPANION_SET(&dwc3->dev, ACPI_COMPANION(dev));
 179
 180        ret = platform_device_add(dwc3);
 181        if (ret) {
 182                dev_err(dev, "failed to register dwc3 device\n");
 183                goto err;
 184        }
 185
 186        return 0;
 187err:
 188        platform_device_put(dwc3);
 189        return ret;
 190}
 191
 192static void dwc3_pci_remove(struct pci_dev *pci)
 193{
 194        acpi_dev_remove_driver_gpios(ACPI_COMPANION(&pci->dev));
 195        platform_device_unregister(pci_get_drvdata(pci));
 196}
 197
 198static const struct pci_device_id dwc3_pci_id_table[] = {
 199        {
 200                PCI_DEVICE(PCI_VENDOR_ID_SYNOPSYS,
 201                                PCI_DEVICE_ID_SYNOPSYS_HAPSUSB3),
 202        },
 203        {
 204                PCI_DEVICE(PCI_VENDOR_ID_SYNOPSYS,
 205                                PCI_DEVICE_ID_SYNOPSYS_HAPSUSB3_AXI),
 206        },
 207        {
 208                PCI_DEVICE(PCI_VENDOR_ID_SYNOPSYS,
 209                                PCI_DEVICE_ID_SYNOPSYS_HAPSUSB31),
 210        },
 211        { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_BSW), },
 212        { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_BYT), },
 213        { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_MRFLD), },
 214        { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_SPTLP), },
 215        { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_SPTH), },
 216        { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_BXT), },
 217        { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_BXT_M), },
 218        { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_APL), },
 219        { PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_NL_USB), },
 220        {  }    /* Terminating Entry */
 221};
 222MODULE_DEVICE_TABLE(pci, dwc3_pci_id_table);
 223
 224static struct pci_driver dwc3_pci_driver = {
 225        .name           = "dwc3-pci",
 226        .id_table       = dwc3_pci_id_table,
 227        .probe          = dwc3_pci_probe,
 228        .remove         = dwc3_pci_remove,
 229};
 230
 231MODULE_AUTHOR("Felipe Balbi <balbi@ti.com>");
 232MODULE_LICENSE("GPL v2");
 233MODULE_DESCRIPTION("DesignWare USB3 PCI Glue Layer");
 234
 235module_pci_driver(dwc3_pci_driver);
 236