LXR linux/include/linux/pxa2xx

   1/*
   2 *  pxa2xx_ssp.h
   3 *
   4 *  Copyright (C) 2003 Russell King, All Rights Reserved.
   5 *
   6 * This program is free software; you can redistribute it and/or modify
   7 * it under the terms of the GNU General Public License version 2 as
   8 * published by the Free Software Foundation.
   9 *
  10 * This driver supports the following PXA CPU/SSP ports:-
  11 *
  12 *       PXA250     SSP
  13 *       PXA255     SSP, NSSP
  14 *       PXA26x     SSP, NSSP, ASSP
  15 *       PXA27x     SSP1, SSP2, SSP3
  16 *       PXA3xx     SSP1, SSP2, SSP3, SSP4
  17 */
  18
  19#ifndef __LINUX_SSP_H
  20#define __LINUX_SSP_H
  21
  22#include <linux/list.h>
  23#include <linux/io.h>
  24#include <linux/of.h>
  25
  26
  27/*
  28 * SSP Serial Port Registers
  29 * PXA250, PXA255, PXA26x and PXA27x SSP controllers are all slightly different.
  30 * PXA255, PXA26x and PXA27x have extra ports, registers and bits.
  31 */
  32
  33#define SSCR0           (0x00)  /* SSP Control Register 0 */
  34#define SSCR1           (0x04)  /* SSP Control Register 1 */
  35#define SSSR            (0x08)  /* SSP Status Register */
  36#define SSITR           (0x0C)  /* SSP Interrupt Test Register */
  37#define SSDR            (0x10)  /* SSP Data Write/Data Read Register */
  38
  39#define SSTO            (0x28)  /* SSP Time Out Register */
  40#define DDS_RATE        (0x28)  /* SSP DDS Clock Rate Register (Intel Quark) */
  41#define SSPSP           (0x2C)  /* SSP Programmable Serial Protocol */
  42#define SSTSA           (0x30)  /* SSP Tx Timeslot Active */
  43#define SSRSA           (0x34)  /* SSP Rx Timeslot Active */
  44#define SSTSS           (0x38)  /* SSP Timeslot Status */
  45#define SSACD           (0x3C)  /* SSP Audio Clock Divider */
  46#define SSACDD          (0x40)  /* SSP Audio Clock Dither Divider */
  47
  48/* Common PXA2xx bits first */
  49#define SSCR0_DSS       (0x0000000f)    /* Data Size Select (mask) */
  50#define SSCR0_DataSize(x)  ((x) - 1)    /* Data Size Select [4..16] */
  51#define SSCR0_FRF       (0x00000030)    /* FRame Format (mask) */
  52#define SSCR0_Motorola  (0x0 << 4)      /* Motorola's Serial Peripheral Interface (SPI) */
  53#define SSCR0_TI        (0x1 << 4)      /* Texas Instruments' Synchronous Serial Protocol (SSP) */
  54#define SSCR0_National  (0x2 << 4)      /* National Microwire */
  55#define SSCR0_ECS       (1 << 6)        /* External clock select */
  56#define SSCR0_SSE       (1 << 7)        /* Synchronous Serial Port Enable */
  57#define SSCR0_SCR(x)    ((x) << 8)      /* Serial Clock Rate (mask) */
  58
  59/* PXA27x, PXA3xx */
  60#define SSCR0_EDSS      (1 << 20)       /* Extended data size select */
  61#define SSCR0_NCS       (1 << 21)       /* Network clock select */
  62#define SSCR0_RIM       (1 << 22)       /* Receive FIFO overrrun interrupt mask */
  63#define SSCR0_TUM       (1 << 23)       /* Transmit FIFO underrun interrupt mask */
  64#define SSCR0_FRDC      (0x07000000)    /* Frame rate divider control (mask) */
  65#define SSCR0_SlotsPerFrm(x) (((x) - 1) << 24)  /* Time slots per frame [1..8] */
  66#define SSCR0_FPCKE     (1 << 29)       /* FIFO packing enable */
  67#define SSCR0_ACS       (1 << 30)       /* Audio clock select */
  68#define SSCR0_MOD       (1 << 31)       /* Mode (normal or network) */
  69
  70
  71#define SSCR1_RIE       (1 << 0)        /* Receive FIFO Interrupt Enable */
  72#define SSCR1_TIE       (1 << 1)        /* Transmit FIFO Interrupt Enable */
  73#define SSCR1_LBM       (1 << 2)        /* Loop-Back Mode */
  74#define SSCR1_SPO       (1 << 3)        /* Motorola SPI SSPSCLK polarity setting */
  75#define SSCR1_SPH       (1 << 4)        /* Motorola SPI SSPSCLK phase setting */
  76#define SSCR1_MWDS      (1 << 5)        /* Microwire Transmit Data Size */
  77
  78#define SSSR_ALT_FRM_MASK       3       /* Masks the SFRM signal number */
  79#define SSSR_TNF        (1 << 2)        /* Transmit FIFO Not Full */
  80#define SSSR_RNE        (1 << 3)        /* Receive FIFO Not Empty */
  81#define SSSR_BSY        (1 << 4)        /* SSP Busy */
  82#define SSSR_TFS        (1 << 5)        /* Transmit FIFO Service Request */
  83#define SSSR_RFS        (1 << 6)        /* Receive FIFO Service Request */
  84#define SSSR_ROR        (1 << 7)        /* Receive FIFO Overrun */
  85
  86#ifdef CONFIG_ARCH_PXA
  87#define RX_THRESH_DFLT  8
  88#define TX_THRESH_DFLT  8
  89
  90#define SSSR_TFL_MASK   (0xf << 8)      /* Transmit FIFO Level mask */
  91#define SSSR_RFL_MASK   (0xf << 12)     /* Receive FIFO Level mask */
  92
  93#define SSCR1_TFT       (0x000003c0)    /* Transmit FIFO Threshold (mask) */
  94#define SSCR1_TxTresh(x) (((x) - 1) << 6) /* level [1..16] */
  95#define SSCR1_RFT       (0x00003c00)    /* Receive FIFO Threshold (mask) */
  96#define SSCR1_RxTresh(x) (((x) - 1) << 10) /* level [1..16] */
  97
  98#else
  99
 100#define RX_THRESH_DFLT  2
 101#define TX_THRESH_DFLT  2
 102
 103#define SSSR_TFL_MASK   (0x3 << 8)      /* Transmit FIFO Level mask */
 104#define SSSR_RFL_MASK   (0x3 << 12)     /* Receive FIFO Level mask */
 105
 106#define SSCR1_TFT       (0x000000c0)    /* Transmit FIFO Threshold (mask) */
 107#define SSCR1_TxTresh(x) (((x) - 1) << 6) /* level [1..4] */
 108#define SSCR1_RFT       (0x00000c00)    /* Receive FIFO Threshold (mask) */
 109#define SSCR1_RxTresh(x) (((x) - 1) << 10) /* level [1..4] */
 110#endif
 111
 112/* QUARK_X1000 SSCR0 bit definition */
 113#define QUARK_X1000_SSCR0_DSS   (0x1F)          /* Data Size Select (mask) */
 114#define QUARK_X1000_SSCR0_DataSize(x)  ((x) - 1)        /* Data Size Select [4..32] */
 115#define QUARK_X1000_SSCR0_FRF   (0x3 << 5)      /* FRame Format (mask) */
 116#define QUARK_X1000_SSCR0_Motorola      (0x0 << 5)      /* Motorola's Serial Peripheral Interface (SPI) */
 117
 118#define RX_THRESH_QUARK_X1000_DFLT      1
 119#define TX_THRESH_QUARK_X1000_DFLT      16
 120
 121#define QUARK_X1000_SSSR_TFL_MASK       (0x1F << 8)     /* Transmit FIFO Level mask */
 122#define QUARK_X1000_SSSR_RFL_MASK       (0x1F << 13)    /* Receive FIFO Level mask */
 123
 124#define QUARK_X1000_SSCR1_TFT   (0x1F << 6)     /* Transmit FIFO Threshold (mask) */
 125#define QUARK_X1000_SSCR1_TxTresh(x) (((x) - 1) << 6)   /* level [1..32] */
 126#define QUARK_X1000_SSCR1_RFT   (0x1F << 11)    /* Receive FIFO Threshold (mask) */
 127#define QUARK_X1000_SSCR1_RxTresh(x) (((x) - 1) << 11)  /* level [1..32] */
 128#define QUARK_X1000_SSCR1_STRF       (1 << 17)          /* Select FIFO or EFWR */
 129#define QUARK_X1000_SSCR1_EFWR  (1 << 16)               /* Enable FIFO Write/Read */
 130
 131/* extra bits in PXA255, PXA26x and PXA27x SSP ports */
 132#define SSCR0_TISSP             (1 << 4)        /* TI Sync Serial Protocol */
 133#define SSCR0_PSP               (3 << 4)        /* PSP - Programmable Serial Protocol */
 134#define SSCR1_TTELP             (1 << 31)       /* TXD Tristate Enable Last Phase */
 135#define SSCR1_TTE               (1 << 30)       /* TXD Tristate Enable */
 136#define SSCR1_EBCEI             (1 << 29)       /* Enable Bit Count Error interrupt */
 137#define SSCR1_SCFR              (1 << 28)       /* Slave Clock free Running */
 138#define SSCR1_ECRA              (1 << 27)       /* Enable Clock Request A */
 139#define SSCR1_ECRB              (1 << 26)       /* Enable Clock request B */
 140#define SSCR1_SCLKDIR           (1 << 25)       /* Serial Bit Rate Clock Direction */
 141#define SSCR1_SFRMDIR           (1 << 24)       /* Frame Direction */
 142#define SSCR1_RWOT              (1 << 23)       /* Receive Without Transmit */
 143#define SSCR1_TRAIL             (1 << 22)       /* Trailing Byte */
 144#define SSCR1_TSRE              (1 << 21)       /* Transmit Service Request Enable */
 145#define SSCR1_RSRE              (1 << 20)       /* Receive Service Request Enable */
 146#define SSCR1_TINTE             (1 << 19)       /* Receiver Time-out Interrupt enable */
 147#define SSCR1_PINTE             (1 << 18)       /* Peripheral Trailing Byte Interrupt Enable */
 148#define SSCR1_IFS               (1 << 16)       /* Invert Frame Signal */
 149#define SSCR1_STRF              (1 << 15)       /* Select FIFO or EFWR */
 150#define SSCR1_EFWR              (1 << 14)       /* Enable FIFO Write/Read */
 151
 152#define SSSR_BCE                (1 << 23)       /* Bit Count Error */
 153#define SSSR_CSS                (1 << 22)       /* Clock Synchronisation Status */
 154#define SSSR_TUR                (1 << 21)       /* Transmit FIFO Under Run */
 155#define SSSR_EOC                (1 << 20)       /* End Of Chain */
 156#define SSSR_TINT               (1 << 19)       /* Receiver Time-out Interrupt */
 157#define SSSR_PINT               (1 << 18)       /* Peripheral Trailing Byte Interrupt */
 158
 159
 160#define SSPSP_SCMODE(x)         ((x) << 0)      /* Serial Bit Rate Clock Mode */
 161#define SSPSP_SFRMP             (1 << 2)        /* Serial Frame Polarity */
 162#define SSPSP_ETDS              (1 << 3)        /* End of Transfer data State */
 163#define SSPSP_STRTDLY(x)        ((x) << 4)      /* Start Delay */
 164#define SSPSP_DMYSTRT(x)        ((x) << 7)      /* Dummy Start */
 165#define SSPSP_SFRMDLY(x)        ((x) << 9)      /* Serial Frame Delay */
 166#define SSPSP_SFRMWDTH(x)       ((x) << 16)     /* Serial Frame Width */
 167#define SSPSP_DMYSTOP(x)        ((x) << 23)     /* Dummy Stop */
 168#define SSPSP_FSRT              (1 << 25)       /* Frame Sync Relative Timing */
 169
 170/* PXA3xx */
 171#define SSPSP_EDMYSTRT(x)       ((x) << 26)     /* Extended Dummy Start */
 172#define SSPSP_EDMYSTOP(x)       ((x) << 28)     /* Extended Dummy Stop */
 173#define SSPSP_TIMING_MASK       (0x7f8001f0)
 174
 175#define SSACD_SCDB              (1 << 3)        /* SSPSYSCLK Divider Bypass */
 176#define SSACD_ACPS(x)           ((x) << 4)      /* Audio clock PLL select */
 177#define SSACD_ACDS(x)           ((x) << 0)      /* Audio clock divider select */
 178#define SSACD_SCDX8             (1 << 7)        /* SYSCLK division ratio select */
 179
 180/* LPSS SSP */
 181#define SSITF                   0x44            /* TX FIFO trigger level */
 182#define SSITF_TxLoThresh(x)     (((x) - 1) << 8)
 183#define SSITF_TxHiThresh(x)     ((x) - 1)
 184
 185#define SSIRF                   0x48            /* RX FIFO trigger level */
 186#define SSIRF_RxThresh(x)       ((x) - 1)
 187
 188enum pxa_ssp_type {
 189        SSP_UNDEFINED = 0,
 190        PXA25x_SSP,  /* pxa 210, 250, 255, 26x */
 191        PXA25x_NSSP, /* pxa 255, 26x (including ASSP) */
 192        PXA27x_SSP,
 193        PXA3xx_SSP,
 194        PXA168_SSP,
 195        PXA910_SSP,
 196        CE4100_SSP,
 197        QUARK_X1000_SSP,
 198        LPSS_LPT_SSP, /* Keep LPSS types sorted with lpss_platforms[] */
 199        LPSS_BYT_SSP,
 200        LPSS_BSW_SSP,
 201        LPSS_SPT_SSP,
 202        LPSS_BXT_SSP,
 203};
 204
 205struct ssp_device {
 206        struct platform_device *pdev;
 207        struct list_head        node;
 208
 209        struct clk      *clk;
 210        void __iomem    *mmio_base;
 211        unsigned long   phys_base;
 212
 213        const char      *label;
 214        int             port_id;
 215        int             type;
 216        int             use_count;
 217        int             irq;
 218        int             drcmr_rx;
 219        int             drcmr_tx;
 220
 221        struct device_node      *of_node;
 222};
 223
 224/**
 225 * pxa_ssp_write_reg - Write to a SSP register
 226 *
 227 * @dev: SSP device to access
 228 * @reg: Register to write to
 229 * @val: Value to be written.
 230 */
 231static inline void pxa_ssp_write_reg(struct ssp_device *dev, u32 reg, u32 val)
 232{
 233        __raw_writel(val, dev->mmio_base + reg);
 234}
 235
 236/**
 237 * pxa_ssp_read_reg - Read from a SSP register
 238 *
 239 * @dev: SSP device to access
 240 * @reg: Register to read from
 241 */
 242static inline u32 pxa_ssp_read_reg(struct ssp_device *dev, u32 reg)
 243{
 244        return __raw_readl(dev->mmio_base + reg);
 245}
 246
 247#if IS_ENABLED(CONFIG_PXA_SSP)
 248struct ssp_device *pxa_ssp_request(int port, const char *label);
 249void pxa_ssp_free(struct ssp_device *);
 250struct ssp_device *pxa_ssp_request_of(const struct device_node *of_node,
 251                                      const char *label);
 252#else
 253static inline struct ssp_device *pxa_ssp_request(int port, const char *label)
 254{
 255        return NULL;
 256}
 257static inline struct ssp_device *pxa_ssp_request_of(const struct device_node *n,
 258                                                    const char *name)
 259{
 260        return NULL;
 261}
 262static inline void pxa_ssp_free(struct ssp_device *ssp) {}
 263#endif
 264
 265#endif
 266