#ifndef __SOUND_AC97_CODEC_H
#define __SOUND_AC97_CODEC_H

/*
 *  Copyright (c) by Jaroslav Kysela <perex@perex.cz>
 *  Universal interface for Audio Codec '97
 *
 *  For more details look to AC '97 component specification revision 2.1
 *  by Intel Corporation (http://developer.intel.com).
 *
 *
 *   This program is free software; you can redistribute it and/or modify
 *   it under the terms of the GNU General Public License as published by
 *   the Free Software Foundation; either version 2 of the License, or
 *   (at your option) any later version.
 *
 *   This program is distributed in the hope that it will be useful,
 *   but WITHOUT ANY WARRANTY; without even the implied warranty of
 *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 *   GNU General Public License for more details.
 *
 *   You should have received a copy of the GNU General Public License
 *   along with this program; if not, write to the Free Software
 *   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
 *
 */

#include <linux/bitops.h>
#include <linux/device.h>
#include <linux/workqueue.h>
#include <sound/pcm.h>
#include <sound/control.h>
#include <sound/info.h>

/* maximum number of devices on the AC97 bus */
#define AC97_BUS_MAX_DEVICES    4

/*
 *  AC'97 codec registers
 */

#define AC97_RESET              0x00    /* Reset */
#define AC97_MASTER             0x02    /* Master Volume */
#define AC97_HEADPHONE          0x04    /* Headphone Volume (optional) */
#define AC97_MASTER_MONO        0x06    /* Master Volume Mono (optional) */
#define AC97_MASTER_TONE        0x08    /* Master Tone (Bass & Treble) (optional) */
#define AC97_PC_BEEP            0x0a    /* PC Beep Volume (optinal) */
#define AC97_PHONE              0x0c    /* Phone Volume (optional) */
#define AC97_MIC                0x0e    /* MIC Volume */
#define AC97_LINE               0x10    /* Line In Volume */
#define AC97_CD                 0x12    /* CD Volume */
#define AC97_VIDEO              0x14    /* Video Volume (optional) */
#define AC97_AUX                0x16    /* AUX Volume (optional) */
#define AC97_PCM                0x18    /* PCM Volume */
#define AC97_REC_SEL            0x1a    /* Record Select */
#define AC97_REC_GAIN           0x1c    /* Record Gain */
#define AC97_REC_GAIN_MIC       0x1e    /* Record Gain MIC (optional) */
#define AC97_GENERAL_PURPOSE    0x20    /* General Purpose (optional) */
#define AC97_3D_CONTROL         0x22    /* 3D Control (optional) */
#define AC97_INT_PAGING         0x24    /* Audio Interrupt & Paging (AC'97 2.3) */
#define AC97_POWERDOWN          0x26    /* Powerdown control / status */
/* range 0x28-0x3a - AUDIO AC'97 2.0 extensions */
#define AC97_EXTENDED_ID        0x28    /* Extended Audio ID */
#define AC97_EXTENDED_STATUS    0x2a    /* Extended Audio Status and Control */
#define AC97_PCM_FRONT_DAC_RATE 0x2c    /* PCM Front DAC Rate */
#define AC97_PCM_SURR_DAC_RATE  0x2e    /* PCM Surround DAC Rate */
#define AC97_PCM_LFE_DAC_RATE   0x30    /* PCM LFE DAC Rate */
#define AC97_PCM_LR_ADC_RATE    0x32    /* PCM LR ADC Rate */
#define AC97_PCM_MIC_ADC_RATE   0x34    /* PCM MIC ADC Rate */
#define AC97_CENTER_LFE_MASTER  0x36    /* Center + LFE Master Volume */
#define AC97_SURROUND_MASTER    0x38    /* Surround (Rear) Master Volume */
#define AC97_SPDIF              0x3a    /* S/PDIF control */
/* range 0x3c-0x58 - MODEM */
#define AC97_EXTENDED_MID       0x3c    /* Extended Modem ID */
#define AC97_EXTENDED_MSTATUS   0x3e    /* Extended Modem Status and Control */
#define AC97_LINE1_RATE         0x40    /* Line1 DAC/ADC Rate */
#define AC97_LINE2_RATE         0x42    /* Line2 DAC/ADC Rate */
#define AC97_HANDSET_RATE       0x44    /* Handset DAC/ADC Rate */
#define AC97_LINE1_LEVEL        0x46    /* Line1 DAC/ADC Level */
#define AC97_LINE2_LEVEL        0x48    /* Line2 DAC/ADC Level */
#define AC97_HANDSET_LEVEL      0x4a    /* Handset DAC/ADC Level */
#define AC97_GPIO_CFG           0x4c    /* GPIO Configuration */
#define AC97_GPIO_POLARITY      0x4e    /* GPIO Pin Polarity/Type, 0=low, 1=high active */
#define AC97_GPIO_STICKY        0x50    /* GPIO Pin Sticky, 0=not, 1=sticky */
#define AC97_GPIO_WAKEUP        0x52    /* GPIO Pin Wakeup, 0=no int, 1=yes int */
#define AC97_GPIO_STATUS        0x54    /* GPIO Pin Status, slot 12 */
#define AC97_MISC_AFE           0x56    /* Miscellaneous Modem AFE Status and Control */
/* range 0x5a-0x7b - Vendor Specific */
#define AC97_VENDOR_ID1         0x7c    /* Vendor ID1 */
#define AC97_VENDOR_ID2         0x7e    /* Vendor ID2 / revision */
/* range 0x60-0x6f (page 1) - extended codec registers */
#define AC97_CODEC_CLASS_REV    0x60    /* Codec Class/Revision */
#define AC97_PCI_SVID           0x62    /* PCI Subsystem Vendor ID */
#define AC97_PCI_SID            0x64    /* PCI Subsystem ID */
#define AC97_FUNC_SELECT        0x66    /* Function Select */
#define AC97_FUNC_INFO          0x68    /* Function Information */
#define AC97_SENSE_INFO         0x6a    /* Sense Details */

/* volume controls */
#define AC97_MUTE_MASK_MONO     0x8000
#define AC97_MUTE_MASK_STEREO   0x8080

/* slot allocation */
#define AC97_SLOT_TAG           0
#define AC97_SLOT_CMD_ADDR      1
#define AC97_SLOT_CMD_DATA      2
#define AC97_SLOT_PCM_LEFT      3
#define AC97_SLOT_PCM_RIGHT     4
#define AC97_SLOT_MODEM_LINE1   5
#define AC97_SLOT_PCM_CENTER    6
#define AC97_SLOT_MIC           6       /* input */
#define AC97_SLOT_SPDIF_LEFT1   6
#define AC97_SLOT_PCM_SLEFT     7       /* surround left */
#define AC97_SLOT_PCM_LEFT_0    7       /* double rate operation */
#define AC97_SLOT_SPDIF_LEFT    7
#define AC97_SLOT_PCM_SRIGHT    8       /* surround right */
#define AC97_SLOT_PCM_RIGHT_0   8       /* double rate operation */
#define AC97_SLOT_SPDIF_RIGHT   8
#define AC97_SLOT_LFE           9
#define AC97_SLOT_SPDIF_RIGHT1  9
#define AC97_SLOT_MODEM_LINE2   10
#define AC97_SLOT_PCM_LEFT_1    10      /* double rate operation */
#define AC97_SLOT_SPDIF_LEFT2   10
#define AC97_SLOT_HANDSET       11      /* output */
#define AC97_SLOT_PCM_RIGHT_1   11      /* double rate operation */
#define AC97_SLOT_SPDIF_RIGHT2  11
#define AC97_SLOT_MODEM_GPIO    12      /* modem GPIO */
#define AC97_SLOT_PCM_CENTER_1  12      /* double rate operation */

/* basic capabilities (reset register) */
#define AC97_BC_DEDICATED_MIC   0x0001  /* Dedicated Mic PCM In Channel */
#define AC97_BC_RESERVED1       0x0002  /* Reserved (was Modem Line Codec support) */
#define AC97_BC_BASS_TREBLE     0x0004  /* Bass & Treble Control */
#define AC97_BC_SIM_STEREO      0x0008  /* Simulated stereo */
#define AC97_BC_HEADPHONE       0x0010  /* Headphone Out Support */
#define AC97_BC_LOUDNESS        0x0020  /* Loudness (bass boost) Support */
#define AC97_BC_16BIT_DAC       0x0000  /* 16-bit DAC resolution */
#define AC97_BC_18BIT_DAC       0x0040  /* 18-bit DAC resolution */
#define AC97_BC_20BIT_DAC       0x0080  /* 20-bit DAC resolution */
#define AC97_BC_DAC_MASK        0x00c0
#define AC97_BC_16BIT_ADC       0x0000  /* 16-bit ADC resolution */
#define AC97_BC_18BIT_ADC       0x0100  /* 18-bit ADC resolution */
#define AC97_BC_20BIT_ADC       0x0200  /* 20-bit ADC resolution */
#define AC97_BC_ADC_MASK        0x0300
#define AC97_BC_3D_TECH_ID_MASK 0x7c00  /* Per-vendor ID of 3D enhancement */

/* general purpose */
#define AC97_GP_DRSS_MASK       0x0c00  /* double rate slot select */
#define AC97_GP_DRSS_1011       0x0000  /* LR(C) 10+11(+12) */
#define AC97_GP_DRSS_78         0x0400  /* LR 7+8 */

/* powerdown bits */
#define AC97_PD_ADC_STATUS      0x0001  /* ADC status (RO) */
#define AC97_PD_DAC_STATUS      0x0002  /* DAC status (RO) */
#define AC97_PD_MIXER_STATUS    0x0004  /* Analog mixer status (RO) */
#define AC97_PD_VREF_STATUS     0x0008  /* Vref status (RO) */
#define AC97_PD_PR0             0x0100  /* Power down PCM ADCs and input MUX */
#define AC97_PD_PR1             0x0200  /* Power down PCM front DAC */
#define AC97_PD_PR2             0x0400  /* Power down Mixer (Vref still on) */
#define AC97_PD_PR3             0x0800  /* Power down Mixer (Vref off) */
#define AC97_PD_PR4             0x1000  /* Power down AC-Link */
#define AC97_PD_PR5             0x2000  /* Disable internal clock usage */
#define AC97_PD_PR6             0x4000  /* Headphone amplifier */
#define AC97_PD_EAPD            0x8000  /* External Amplifer Power Down (EAPD) */

/* extended audio ID bit defines */
#define AC97_EI_VRA             0x0001  /* Variable bit rate supported */
#define AC97_EI_DRA             0x0002  /* Double rate supported */
#define AC97_EI_SPDIF           0x0004  /* S/PDIF out supported */
#define AC97_EI_VRM             0x0008  /* Variable bit rate supported for MIC */
#define AC97_EI_DACS_SLOT_MASK  0x0030  /* DACs slot assignment */
#define AC97_EI_DACS_SLOT_SHIFT 4
#define AC97_EI_CDAC            0x0040  /* PCM Center DAC available */
#define AC97_EI_SDAC            0x0080  /* PCM Surround DACs available */
#define AC97_EI_LDAC            0x0100  /* PCM LFE DAC available */
#define AC97_EI_AMAP            0x0200  /* indicates optional slot/DAC mapping based on codec ID */
#define AC97_EI_REV_MASK        0x0c00  /* AC'97 revision mask */
#define AC97_EI_REV_22          0x0400  /* AC'97 revision 2.2 */
#define AC97_EI_REV_23          0x0800  /* AC'97 revision 2.3 */
#define AC97_EI_REV_SHIFT       10
#define AC97_EI_ADDR_MASK       0xc000  /* physical codec ID (address) */
#define AC97_EI_ADDR_SHIFT      14

/* extended audio status and control bit defines */
#define AC97_EA_VRA             0x0001  /* Variable bit rate enable bit */
#define AC97_EA_DRA             0x0002  /* Double-rate audio enable bit */
#define AC97_EA_SPDIF           0x0004  /* S/PDIF out enable bit */
#define AC97_EA_VRM             0x0008  /* Variable bit rate for MIC enable bit */
#define AC97_EA_SPSA_SLOT_MASK  0x0030  /* Mask for slot assignment bits */
#define AC97_EA_SPSA_SLOT_SHIFT 4
#define AC97_EA_SPSA_3_4        0x0000  /* Slot assigned to 3 & 4 */
#define AC97_EA_SPSA_7_8        0x0010  /* Slot assigned to 7 & 8 */
#define AC97_EA_SPSA_6_9        0x0020  /* Slot assigned to 6 & 9 */
#define AC97_EA_SPSA_10_11      0x0030  /* Slot assigned to 10 & 11 */
#define AC97_EA_CDAC            0x0040  /* PCM Center DAC is ready (Read only) */
#define AC97_EA_SDAC            0x0080  /* PCM Surround DACs are ready (Read only) */
#define AC97_EA_LDAC            0x0100  /* PCM LFE DAC is ready (Read only) */
#define AC97_EA_MDAC            0x0200  /* MIC ADC is ready (Read only) */
#define AC97_EA_SPCV            0x0400  /* S/PDIF configuration valid (Read only) */
#define AC97_EA_PRI             0x0800  /* Turns the PCM Center DAC off */
#define AC97_EA_PRJ             0x1000  /* Turns the PCM Surround DACs off */
#define AC97_EA_PRK             0x2000  /* Turns the PCM LFE DAC off */
#define AC97_EA_PRL             0x4000  /* Turns the MIC ADC off */

/* S/PDIF control bit defines */
#define AC97_SC_PRO             0x0001  /* Professional status */
#define AC97_SC_NAUDIO          0x0002  /* Non audio stream */
#define AC97_SC_COPY            0x0004  /* Copyright status */
#define AC97_SC_PRE             0x0008  /* Preemphasis status */
#define AC97_SC_CC_MASK         0x07f0  /* Category Code mask */
#define AC97_SC_CC_SHIFT        4
#define AC97_SC_L               0x0800  /* Generation Level status */
#define AC97_SC_SPSR_MASK       0x3000  /* S/PDIF Sample Rate bits */
#define AC97_SC_SPSR_SHIFT      12
#define AC97_SC_SPSR_44K        0x0000  /* Use 44.1kHz Sample rate */
#define AC97_SC_SPSR_48K        0x2000  /* Use 48kHz Sample rate */
#define AC97_SC_SPSR_32K        0x3000  /* Use 32kHz Sample rate */
#define AC97_SC_DRS             0x4000  /* Double Rate S/PDIF */
#define AC97_SC_V               0x8000  /* Validity status */

/* Interrupt and Paging bit defines (AC'97 2.3) */
#define AC97_PAGE_MASK          0x000f  /* Page Selector */
#define AC97_PAGE_VENDOR        0       /* Vendor-specific registers */
#define AC97_PAGE_1             1       /* Extended Codec Registers page 1 */
#define AC97_INT_ENABLE         0x0800  /* Interrupt Enable */
#define AC97_INT_SENSE          0x1000  /* Sense Cycle */
#define AC97_INT_CAUSE_SENSE    0x2000  /* Sense Cycle Completed (RO) */
#define AC97_INT_CAUSE_GPIO     0x4000  /* GPIO bits changed (RO) */
#define AC97_INT_STATUS         0x8000  /* Interrupt Status */

/* extended modem ID bit defines */
#define AC97_MEI_LINE1          0x0001  /* Line1 present */
#define AC97_MEI_LINE2          0x0002  /* Line2 present */
#define AC97_MEI_HANDSET        0x0004  /* Handset present */
#define AC97_MEI_CID1           0x0008  /* caller ID decode for Line1 is supported */
#define AC97_MEI_CID2           0x0010  /* caller ID decode for Line2 is supported */
#define AC97_MEI_ADDR_MASK      0xc000  /* physical codec ID (address) */
#define AC97_MEI_ADDR_SHIFT     14

/* extended modem status and control bit defines */
#define AC97_MEA_GPIO           0x0001  /* GPIO is ready (ro) */
#define AC97_MEA_MREF           0x0002  /* Vref is up to nominal level (ro) */
#define AC97_MEA_ADC1           0x0004  /* ADC1 operational (ro) */
#define AC97_MEA_DAC1           0x0008  /* DAC1 operational (ro) */
#define AC97_MEA_ADC2           0x0010  /* ADC2 operational (ro) */
#define AC97_MEA_DAC2           0x0020  /* DAC2 operational (ro) */
#define AC97_MEA_HADC           0x0040  /* HADC operational (ro) */
#define AC97_MEA_HDAC           0x0080  /* HDAC operational (ro) */
#define AC97_MEA_PRA            0x0100  /* GPIO power down (high) */
#define AC97_MEA_PRB            0x0200  /* reserved */
#define AC97_MEA_PRC            0x0400  /* ADC1 power down (high) */
#define AC97_MEA_PRD            0x0800  /* DAC1 power down (high) */
#define AC97_MEA_PRE            0x1000  /* ADC2 power down (high) */
#define AC97_MEA_PRF            0x2000  /* DAC2 power down (high) */
#define AC97_MEA_PRG            0x4000  /* HADC power down (high) */
#define AC97_MEA_PRH            0x8000  /* HDAC power down (high) */

/* modem gpio status defines */
#define AC97_GPIO_LINE1_OH      0x0001  /* Off Hook Line1 */
#define AC97_GPIO_LINE1_RI      0x0002  /* Ring Detect Line1 */
#define AC97_GPIO_LINE1_CID     0x0004  /* Caller ID path enable Line1 */
#define AC97_GPIO_LINE1_LCS     0x0008  /* Loop Current Sense Line1 */
#define AC97_GPIO_LINE1_PULSE   0x0010  /* Opt./ Pulse Dial Line1 (out) */
#define AC97_GPIO_LINE1_HL1R    0x0020  /* Opt./ Handset to Line1 relay control (out) */
#define AC97_GPIO_LINE1_HOHD    0x0040  /* Opt./ Handset off hook detect Line1 (in) */
#define AC97_GPIO_LINE12_AC     0x0080  /* Opt./ Int.bit 1 / Line1/2 AC (out) */
#define AC97_GPIO_LINE12_DC     0x0100  /* Opt./ Int.bit 2 / Line1/2 DC (out) */
#define AC97_GPIO_LINE12_RS     0x0200  /* Opt./ Int.bit 3 / Line1/2 RS (out) */
#define AC97_GPIO_LINE2_OH      0x0400  /* Off Hook Line2 */
#define AC97_GPIO_LINE2_RI      0x0800  /* Ring Detect Line2 */
#define AC97_GPIO_LINE2_CID     0x1000  /* Caller ID path enable Line2 */
#define AC97_GPIO_LINE2_LCS     0x2000  /* Loop Current Sense Line2 */
#define AC97_GPIO_LINE2_PULSE   0x4000  /* Opt./ Pulse Dial Line2 (out) */
#define AC97_GPIO_LINE2_HL1R    0x8000  /* Opt./ Handset to Line2 relay control (out) */

/* specific - SigmaTel */
#define AC97_SIGMATEL_OUTSEL    0x64    /* Output Select, STAC9758 */
#define AC97_SIGMATEL_INSEL     0x66    /* Input Select, STAC9758 */
#define AC97_SIGMATEL_IOMISC    0x68    /* STAC9758 */
#define AC97_SIGMATEL_ANALOG    0x6c    /* Analog Special */
#define AC97_SIGMATEL_DAC2INVERT 0x6e
#define AC97_SIGMATEL_BIAS1     0x70
#define AC97_SIGMATEL_BIAS2     0x72
#define AC97_SIGMATEL_VARIOUS   0x72    /* STAC9758 */
#define AC97_SIGMATEL_MULTICHN  0x74    /* Multi-Channel programming */
#define AC97_SIGMATEL_CIC1      0x76
#define AC97_SIGMATEL_CIC2      0x78

/* specific - Analog Devices */
#define AC97_AD_TEST            0x5a    /* test register */
#define AC97_AD_TEST2           0x5c    /* undocumented test register 2 */
#define AC97_AD_HPFD_SHIFT      12      /* High Pass Filter Disable */
#define AC97_AD_CODEC_CFG       0x70    /* codec configuration */
#define AC97_AD_JACK_SPDIF      0x72    /* Jack Sense & S/PDIF */
#define AC97_AD_SERIAL_CFG      0x74    /* Serial Configuration */
#define AC97_AD_MISC            0x76    /* Misc Control Bits */
#define AC97_AD_VREFD_SHIFT     2       /* V_REFOUT Disable (AD1888) */

/* specific - Cirrus Logic */
#define AC97_CSR_ACMODE         0x5e    /* AC Mode Register */
#define AC97_CSR_MISC_CRYSTAL   0x60    /* Misc Crystal Control */
#define AC97_CSR_SPDIF          0x68    /* S/PDIF Register */
#define AC97_CSR_SERIAL         0x6a    /* Serial Port Control */
#define AC97_CSR_SPECF_ADDR     0x6c    /* Special Feature Address */
#define AC97_CSR_SPECF_DATA     0x6e    /* Special Feature Data */
#define AC97_CSR_BDI_STATUS     0x7a    /* BDI Status */

/* specific - Conexant */
#define AC97_CXR_AUDIO_MISC     0x5c
#define AC97_CXR_SPDIFEN        (1<<3)
#define AC97_CXR_COPYRGT        (1<<2)
#define AC97_CXR_SPDIF_MASK     (3<<0)
#define AC97_CXR_SPDIF_PCM      0x0
#define AC97_CXR_SPDIF_AC3      0x2

/* specific - ALC */
#define AC97_ALC650_SPDIF_INPUT_STATUS1 0x60
/* S/PDIF input status 1 bit defines */
#define AC97_ALC650_PRO             0x0001  /* Professional status */
#define AC97_ALC650_NAUDIO          0x0002  /* Non audio stream */
#define AC97_ALC650_COPY            0x0004  /* Copyright status */
#define AC97_ALC650_PRE             0x0038  /* Preemphasis status */
#define AC97_ALC650_PRE_SHIFT       3
#define AC97_ALC650_MODE            0x00C0  /* Preemphasis status */
#define AC97_ALC650_MODE_SHIFT      6
#define AC97_ALC650_CC_MASK         0x7f00  /* Category Code mask */
#define AC97_ALC650_CC_SHIFT        8
#define AC97_ALC650_L               0x8000  /* Generation Level status */

#define AC97_ALC650_SPDIF_INPUT_STATUS2 0x62
/* S/PDIF input status 2 bit defines */
#define AC97_ALC650_SOUCE_MASK      0x000f  /* Source number */
#define AC97_ALC650_CHANNEL_MASK    0x00f0  /* Channel number */
#define AC97_ALC650_CHANNEL_SHIFT   4 
#define AC97_ALC650_SPSR_MASK       0x0f00  /* S/PDIF Sample Rate bits */
#define AC97_ALC650_SPSR_SHIFT      8
#define AC97_ALC650_SPSR_44K        0x0000  /* Use 44.1kHz Sample rate */
#define AC97_ALC650_SPSR_48K        0x0200  /* Use 48kHz Sample rate */
#define AC97_ALC650_SPSR_32K        0x0300  /* Use 32kHz Sample rate */
#define AC97_ALC650_CLOCK_ACCURACY  0x3000  /* Clock accuracy */
#define AC97_ALC650_CLOCK_SHIFT     12
#define AC97_ALC650_CLOCK_LOCK      0x4000  /* Clock locked status */
#define AC97_ALC650_V               0x8000  /* Validity status */

#define AC97_ALC650_SURR_DAC_VOL        0x64
#define AC97_ALC650_LFE_DAC_VOL         0x66
#define AC97_ALC650_UNKNOWN1            0x68
#define AC97_ALC650_MULTICH             0x6a
#define AC97_ALC650_UNKNOWN2            0x6c
#define AC97_ALC650_REVISION            0x6e
#define AC97_ALC650_UNKNOWN3            0x70
#define AC97_ALC650_UNKNOWN4            0x72
#define AC97_ALC650_MISC                0x74
#define AC97_ALC650_GPIO_SETUP          0x76
#define AC97_ALC650_GPIO_STATUS         0x78
#define AC97_ALC650_CLOCK               0x7a

/* specific - Yamaha YMF7x3 */
#define AC97_YMF7X3_DIT_CTRL    0x66    /* DIT Control (YMF743) / 2 (YMF753) */
#define AC97_YMF7X3_3D_MODE_SEL 0x68    /* 3D Mode Select */

/* specific - C-Media */
#define AC97_CM9738_VENDOR_CTRL 0x5a
#define AC97_CM9739_MULTI_CHAN  0x64
#define AC97_CM9739_SPDIF_IN_STATUS     0x68 /* 32bit */
#define AC97_CM9739_SPDIF_CTRL  0x6c

/* specific - wolfson */
#define AC97_WM97XX_FMIXER_VOL  0x72
#define AC97_WM9704_RMIXER_VOL  0x74
#define AC97_WM9704_TEST        0x5a
#define AC97_WM9704_RPCM_VOL    0x70
#define AC97_WM9711_OUT3VOL     0x16


/* ac97->scaps */
#define AC97_SCAP_AUDIO         (1<<0)  /* audio codec 97 */
#define AC97_SCAP_MODEM         (1<<1)  /* modem codec 97 */
#define AC97_SCAP_SURROUND_DAC  (1<<2)  /* surround L&R DACs are present */
#define AC97_SCAP_CENTER_LFE_DAC (1<<3) /* center and LFE DACs are present */
#define AC97_SCAP_SKIP_AUDIO    (1<<4)  /* skip audio part of codec */
#define AC97_SCAP_SKIP_MODEM    (1<<5)  /* skip modem part of codec */
#define AC97_SCAP_INDEP_SDIN    (1<<6)  /* independent SDIN */
#define AC97_SCAP_INV_EAPD      (1<<7)  /* inverted EAPD */
#define AC97_SCAP_DETECT_BY_VENDOR (1<<8) /* use vendor registers for read tests */
#define AC97_SCAP_NO_SPDIF      (1<<9)  /* don't build SPDIF controls */
#define AC97_SCAP_EAPD_LED      (1<<10) /* EAPD as mute LED */
#define AC97_SCAP_POWER_SAVE    (1<<11) /* capable for aggressive power-saving */

/* ac97->flags */
#define AC97_HAS_PC_BEEP        (1<<0)  /* force PC Speaker usage */
#define AC97_AD_MULTI           (1<<1)  /* Analog Devices - multi codecs */
#define AC97_CS_SPDIF           (1<<2)  /* Cirrus Logic uses funky SPDIF */
#define AC97_CX_SPDIF           (1<<3)  /* Conexant's spdif interface */
#define AC97_STEREO_MUTES       (1<<4)  /* has stereo mute bits */
#define AC97_DOUBLE_RATE        (1<<5)  /* supports double rate playback */
#define AC97_HAS_NO_MASTER_VOL  (1<<6)  /* no Master volume */
#define AC97_HAS_NO_PCM_VOL     (1<<7)  /* no PCM volume */
#define AC97_DEFAULT_POWER_OFF  (1<<8)  /* no RESET write */
#define AC97_MODEM_PATCH        (1<<9)  /* modem patch */
#define AC97_HAS_NO_REC_GAIN    (1<<10) /* no Record gain */
#define AC97_HAS_NO_PHONE       (1<<11) /* no PHONE volume */
#define AC97_HAS_NO_PC_BEEP     (1<<12) /* no PC Beep volume */
#define AC97_HAS_NO_VIDEO       (1<<13) /* no Video volume */
#define AC97_HAS_NO_CD          (1<<14) /* no CD volume */
#define AC97_HAS_NO_MIC (1<<15) /* no MIC volume */
#define AC97_HAS_NO_TONE        (1<<16) /* no Tone volume */
#define AC97_HAS_NO_STD_PCM     (1<<17) /* no standard AC97 PCM volume and mute */
#define AC97_HAS_NO_AUX         (1<<18) /* no standard AC97 AUX volume and mute */
#define AC97_HAS_8CH            (1<<19) /* supports 8-channel output */

/* rates indexes */
#define AC97_RATES_FRONT_DAC    0
#define AC97_RATES_SURR_DAC     1
#define AC97_RATES_LFE_DAC      2
#define AC97_RATES_ADC          3
#define AC97_RATES_MIC_ADC      4
#define AC97_RATES_SPDIF        5

#define AC97_NUM_GPIOS          16
/*
 *
 */

struct snd_ac97;
struct snd_ac97_gpio_priv;
struct snd_pcm_chmap;

struct snd_ac97_build_ops {
        int (*build_3d) (struct snd_ac97 *ac97);
        int (*build_specific) (struct snd_ac97 *ac97);
        int (*build_spdif) (struct snd_ac97 *ac97);
        int (*build_post_spdif) (struct snd_ac97 *ac97);
#ifdef CONFIG_PM
        void (*suspend) (struct snd_ac97 *ac97);
        void (*resume) (struct snd_ac97 *ac97);
#endif
        void (*update_jacks) (struct snd_ac97 *ac97);   /* for jack-sharing */
};

struct snd_ac97_bus_ops {
        void (*reset) (struct snd_ac97 *ac97);
        void (*warm_reset)(struct snd_ac97 *ac97);
        void (*write) (struct snd_ac97 *ac97, unsigned short reg, unsigned short val);
        unsigned short (*read) (struct snd_ac97 *ac97, unsigned short reg);
        void (*wait) (struct snd_ac97 *ac97);
        void (*init) (struct snd_ac97 *ac97);
};

struct snd_ac97_bus {
        /* -- lowlevel (hardware) driver specific -- */
        struct snd_ac97_bus_ops *ops;
        void *private_data;
        void (*private_free) (struct snd_ac97_bus *bus);
        /* --- */
        struct snd_card *card;
        unsigned short num;     /* bus number */
        unsigned short no_vra: 1, /* bridge doesn't support VRA */
                       dra: 1,  /* bridge supports double rate */
                       isdin: 1;/* independent SDIN */
        unsigned int clock;     /* AC'97 base clock (usually 48000Hz) */
        spinlock_t bus_lock;    /* used mainly for slot allocation */
        unsigned short used_slots[2][4]; /* actually used PCM slots */
        unsigned short pcms_count; /* count of PCMs */
        struct ac97_pcm *pcms;
        struct snd_ac97 *codec[4];
        struct snd_info_entry *proc;
};

/* static resolution table */
struct snd_ac97_res_table {
        unsigned short reg;     /* register */
        unsigned short bits;    /* resolution bitmask */
};

struct snd_ac97_template {
        void *private_data;
        void (*private_free) (struct snd_ac97 *ac97);
        struct pci_dev *pci;    /* assigned PCI device - used for quirks */
        unsigned short num;     /* number of codec: 0 = primary, 1 = secondary */
        unsigned short addr;    /* physical address of codec [0-3] */
        unsigned int scaps;     /* driver capabilities */
        const struct snd_ac97_res_table *res_table;     /* static resolution */
};

struct snd_ac97 {
        /* -- lowlevel (hardware) driver specific -- */
        const struct snd_ac97_build_ops *build_ops;
        void *private_data;
        void (*private_free) (struct snd_ac97 *ac97);
        /* --- */
        struct snd_ac97_bus *bus;
        struct pci_dev *pci;    /* assigned PCI device - used for quirks */
        struct snd_info_entry *proc;
        struct snd_info_entry *proc_regs;
        unsigned short subsystem_vendor;
        unsigned short subsystem_device;
        struct mutex reg_mutex;
        struct mutex page_mutex;        /* mutex for AD18xx multi-codecs and paging (2.3) */
        unsigned short num;     /* number of codec: 0 = primary, 1 = secondary */
        unsigned short addr;    /* physical address of codec [0-3] */
        unsigned int id;        /* identification of codec */
        unsigned short caps;    /* capabilities (register 0) */
        unsigned short ext_id;  /* extended feature identification (register 28) */
        unsigned short ext_mid; /* extended modem ID (register 3C) */
        const struct snd_ac97_res_table *res_table;     /* static resolution */
        unsigned int scaps;     /* driver capabilities */
        unsigned int flags;     /* specific code */
        unsigned int rates[6];  /* see AC97_RATES_* defines */
        unsigned int spdif_status;
        unsigned short regs[0x80]; /* register cache */
        DECLARE_BITMAP(reg_accessed, 0x80); /* bit flags */
        union {                 /* vendor specific code */
                struct {
                        unsigned short unchained[3];    // 0 = C34, 1 = C79, 2 = C69
                        unsigned short chained[3];      // 0 = C34, 1 = C79, 2 = C69
                        unsigned short id[3];           // codec IDs (lower 16-bit word)
                        unsigned short pcmreg[3];       // PCM registers
                        unsigned short codec_cfg[3];    // CODEC_CFG bits
                        unsigned char swap_mic_linein;  // AD1986/AD1986A only
                        unsigned char lo_as_master;     /* LO as master */
                } ad18xx;
                unsigned int dev_flags;         /* device specific */
        } spec;
        /* jack-sharing info */
        unsigned char indep_surround;
        unsigned char channel_mode;

#ifdef CONFIG_SND_AC97_POWER_SAVE
        unsigned int power_up;  /* power states */
        struct delayed_work power_work;
#endif
        struct device dev;
        struct snd_ac97_gpio_priv *gpio_priv;

        struct snd_pcm_chmap *chmaps[2]; /* channel-maps (optional) */
};

#define to_ac97_t(d) container_of(d, struct snd_ac97, dev)

/* conditions */
static inline int ac97_is_audio(struct snd_ac97 * ac97)
{
        return (ac97->scaps & AC97_SCAP_AUDIO);
}
static inline int ac97_is_modem(struct snd_ac97 * ac97)
{
        return (ac97->scaps & AC97_SCAP_MODEM);
}
static inline int ac97_is_rev22(struct snd_ac97 * ac97)
{
        return (ac97->ext_id & AC97_EI_REV_MASK) >= AC97_EI_REV_22;
}
static inline int ac97_can_amap(struct snd_ac97 * ac97)
{
        return (ac97->ext_id & AC97_EI_AMAP) != 0;
}
static inline int ac97_can_spdif(struct snd_ac97 * ac97)
{
        return (ac97->ext_id & AC97_EI_SPDIF) != 0;
}

/* functions */
/* create new AC97 bus */
int snd_ac97_bus(struct snd_card *card, int num, struct snd_ac97_bus_ops *ops,
                 void *private_data, struct snd_ac97_bus **rbus);
/* create mixer controls */
int snd_ac97_mixer(struct snd_ac97_bus *bus, struct snd_ac97_template *template,
                   struct snd_ac97 **rac97);
const char *snd_ac97_get_short_name(struct snd_ac97 *ac97);

void snd_ac97_write(struct snd_ac97 *ac97, unsigned short reg, unsigned short value);
unsigned short snd_ac97_read(struct snd_ac97 *ac97, unsigned short reg);
void snd_ac97_write_cache(struct snd_ac97 *ac97, unsigned short reg, unsigned short value);
int snd_ac97_update(struct snd_ac97 *ac97, unsigned short reg, unsigned short value);
int snd_ac97_update_bits(struct snd_ac97 *ac97, unsigned short reg, unsigned short mask, unsigned short value);
#ifdef CONFIG_SND_AC97_POWER_SAVE
int snd_ac97_update_power(struct snd_ac97 *ac97, int reg, int powerup);
#else
static inline int snd_ac97_update_power(struct snd_ac97 *ac97, int reg,
                                        int powerup)
{
        return 0;
}
#endif
#ifdef CONFIG_PM
void snd_ac97_suspend(struct snd_ac97 *ac97);
void snd_ac97_resume(struct snd_ac97 *ac97);
#endif
int snd_ac97_reset(struct snd_ac97 *ac97, bool try_warm, unsigned int id,
        unsigned int id_mask);

/* quirk types */
enum {
        AC97_TUNE_DEFAULT = -1, /* use default from quirk list (not valid in list) */
        AC97_TUNE_NONE = 0,     /* nothing extra to do */
        AC97_TUNE_HP_ONLY,      /* headphone (true line-out) control as master only */
        AC97_TUNE_SWAP_HP,      /* swap headphone and master controls */
        AC97_TUNE_SWAP_SURROUND, /* swap master and surround controls */
        AC97_TUNE_AD_SHARING,   /* for AD1985, turn on OMS bit and use headphone */
        AC97_TUNE_ALC_JACK,     /* for Realtek, enable JACK detection */
        AC97_TUNE_INV_EAPD,     /* inverted EAPD implementation */
        AC97_TUNE_MUTE_LED,     /* EAPD bit works as mute LED */
        AC97_TUNE_HP_MUTE_LED,  /* EAPD bit works as mute LED, use headphone control as master */
};

struct ac97_quirk {
        unsigned short subvendor; /* PCI subsystem vendor id */
        unsigned short subdevice; /* PCI subsystem device id */
        unsigned short mask;    /* device id bit mask, 0 = accept all */
        unsigned int codec_id;  /* codec id (if any), 0 = accept all */
        const char *name;       /* name shown as info */
        int type;               /* quirk type above */
};

int snd_ac97_tune_hardware(struct snd_ac97 *ac97,
                           const struct ac97_quirk *quirk,
                           const char *override);
int snd_ac97_set_rate(struct snd_ac97 *ac97, int reg, unsigned int rate);

/*
 * PCM allocation
 */

enum ac97_pcm_cfg {
        AC97_PCM_CFG_FRONT = 2,
        AC97_PCM_CFG_REAR = 10,         /* alias surround */
        AC97_PCM_CFG_LFE = 11,          /* center + lfe */
        AC97_PCM_CFG_40 = 4,            /* front + rear */
        AC97_PCM_CFG_51 = 6,            /* front + rear + center/lfe */
        AC97_PCM_CFG_SPDIF = 20
};

struct ac97_pcm {
        struct snd_ac97_bus *bus;
        unsigned int stream: 1,            /* stream type: 1 = capture */
                     exclusive: 1,         /* exclusive mode, don't override with other pcms */
                     copy_flag: 1,         /* lowlevel driver must fill all entries */
                     spdif: 1;             /* spdif pcm */
        unsigned short aslots;             /* active slots */
        unsigned short cur_dbl;            /* current double-rate state */
        unsigned int rates;                /* available rates */
        struct {
                unsigned short slots;      /* driver input: requested AC97 slot numbers */
                unsigned short rslots[4];  /* allocated slots per codecs */
                unsigned char rate_table[4];
                struct snd_ac97 *codec[4];         /* allocated codecs */
        } r[2];                            /* 0 = standard rates, 1 = double rates */
        unsigned long private_value;       /* used by the hardware driver */
};

int snd_ac97_pcm_assign(struct snd_ac97_bus *ac97,
                        unsigned short pcms_count,
                        const struct ac97_pcm *pcms);
int snd_ac97_pcm_open(struct ac97_pcm *pcm, unsigned int rate,
                      enum ac97_pcm_cfg cfg, unsigned short slots);
int snd_ac97_pcm_close(struct ac97_pcm *pcm);
int snd_ac97_pcm_double_rate_rules(struct snd_pcm_runtime *runtime);

/* ad hoc AC97 device driver access */
extern struct bus_type ac97_bus_type;

/* AC97 platform_data adding function */
static inline void snd_ac97_dev_add_pdata(struct snd_ac97 *ac97, void *data)
{
        ac97->dev.platform_data = data;
}

#endif /* __SOUND_AC97_CODEC_H */