linux/include/sound/hda_register.h
<<
>>
Prefs
   1/*
   2 * HD-audio controller (Azalia) registers and helpers
   3 *
   4 * For traditional reasons, we still use azx_ prefix here
   5 */
   6
   7#ifndef __SOUND_HDA_REGISTER_H
   8#define __SOUND_HDA_REGISTER_H
   9
  10#include <linux/io.h>
  11#include <sound/hdaudio.h>
  12
  13#define AZX_REG_GCAP                    0x00
  14#define   AZX_GCAP_64OK         (1 << 0)   /* 64bit address support */
  15#define   AZX_GCAP_NSDO         (3 << 1)   /* # of serial data out signals */
  16#define   AZX_GCAP_BSS          (31 << 3)  /* # of bidirectional streams */
  17#define   AZX_GCAP_ISS          (15 << 8)  /* # of input streams */
  18#define   AZX_GCAP_OSS          (15 << 12) /* # of output streams */
  19#define AZX_REG_VMIN                    0x02
  20#define AZX_REG_VMAJ                    0x03
  21#define AZX_REG_OUTPAY                  0x04
  22#define AZX_REG_INPAY                   0x06
  23#define AZX_REG_GCTL                    0x08
  24#define   AZX_GCTL_RESET        (1 << 0)   /* controller reset */
  25#define   AZX_GCTL_FCNTRL       (1 << 1)   /* flush control */
  26#define   AZX_GCTL_UNSOL        (1 << 8)   /* accept unsol. response enable */
  27#define AZX_REG_WAKEEN                  0x0c
  28#define AZX_REG_STATESTS                0x0e
  29#define AZX_REG_GSTS                    0x10
  30#define   AZX_GSTS_FSTS         (1 << 1)   /* flush status */
  31#define AZX_REG_GCAP2                   0x12
  32#define AZX_REG_LLCH                    0x14
  33#define AZX_REG_OUTSTRMPAY              0x18
  34#define AZX_REG_INSTRMPAY               0x1A
  35#define AZX_REG_INTCTL                  0x20
  36#define AZX_REG_INTSTS                  0x24
  37#define AZX_REG_WALLCLK                 0x30    /* 24Mhz source */
  38#define AZX_REG_OLD_SSYNC               0x34    /* SSYNC for old ICH */
  39#define AZX_REG_SSYNC                   0x38
  40#define AZX_REG_CORBLBASE               0x40
  41#define AZX_REG_CORBUBASE               0x44
  42#define AZX_REG_CORBWP                  0x48
  43#define AZX_REG_CORBRP                  0x4a
  44#define   AZX_CORBRP_RST        (1 << 15)  /* read pointer reset */
  45#define AZX_REG_CORBCTL                 0x4c
  46#define   AZX_CORBCTL_RUN       (1 << 1)   /* enable DMA */
  47#define   AZX_CORBCTL_CMEIE     (1 << 0)   /* enable memory error irq */
  48#define AZX_REG_CORBSTS                 0x4d
  49#define   AZX_CORBSTS_CMEI      (1 << 0)   /* memory error indication */
  50#define AZX_REG_CORBSIZE                0x4e
  51
  52#define AZX_REG_RIRBLBASE               0x50
  53#define AZX_REG_RIRBUBASE               0x54
  54#define AZX_REG_RIRBWP                  0x58
  55#define   AZX_RIRBWP_RST        (1 << 15)  /* write pointer reset */
  56#define AZX_REG_RINTCNT                 0x5a
  57#define AZX_REG_RIRBCTL                 0x5c
  58#define   AZX_RBCTL_IRQ_EN      (1 << 0)   /* enable IRQ */
  59#define   AZX_RBCTL_DMA_EN      (1 << 1)   /* enable DMA */
  60#define   AZX_RBCTL_OVERRUN_EN  (1 << 2)   /* enable overrun irq */
  61#define AZX_REG_RIRBSTS                 0x5d
  62#define   AZX_RBSTS_IRQ         (1 << 0)   /* response irq */
  63#define   AZX_RBSTS_OVERRUN     (1 << 2)   /* overrun irq */
  64#define AZX_REG_RIRBSIZE                0x5e
  65
  66#define AZX_REG_IC                      0x60
  67#define AZX_REG_IR                      0x64
  68#define AZX_REG_IRS                     0x68
  69#define   AZX_IRS_VALID         (1<<1)
  70#define   AZX_IRS_BUSY          (1<<0)
  71
  72#define AZX_REG_DPLBASE                 0x70
  73#define AZX_REG_DPUBASE                 0x74
  74#define   AZX_DPLBASE_ENABLE    0x1     /* Enable position buffer */
  75
  76/* SD offset: SDI0=0x80, SDI1=0xa0, ... SDO3=0x160 */
  77enum { SDI0, SDI1, SDI2, SDI3, SDO0, SDO1, SDO2, SDO3 };
  78
  79/* stream register offsets from stream base */
  80#define AZX_REG_SD_CTL                  0x00
  81#define AZX_REG_SD_STS                  0x03
  82#define AZX_REG_SD_LPIB                 0x04
  83#define AZX_REG_SD_CBL                  0x08
  84#define AZX_REG_SD_LVI                  0x0c
  85#define AZX_REG_SD_FIFOW                0x0e
  86#define AZX_REG_SD_FIFOSIZE             0x10
  87#define AZX_REG_SD_FORMAT               0x12
  88#define AZX_REG_SD_FIFOL                0x14
  89#define AZX_REG_SD_BDLPL                0x18
  90#define AZX_REG_SD_BDLPU                0x1c
  91
  92/* Haswell/Broadwell display HD-A controller Extended Mode registers */
  93#define AZX_REG_HSW_EM4                 0x100c
  94#define AZX_REG_HSW_EM5                 0x1010
  95
  96/* Skylake/Broxton display HD-A controller Extended Mode registers */
  97#define AZX_REG_SKL_EM4L                0x1040
  98
  99/* PCI space */
 100#define AZX_PCIREG_TCSEL                0x44
 101
 102/*
 103 * other constants
 104 */
 105
 106/* max number of fragments - we may use more if allocating more pages for BDL */
 107#define BDL_SIZE                4096
 108#define AZX_MAX_BDL_ENTRIES     (BDL_SIZE / 16)
 109#define AZX_MAX_FRAG            32
 110/* max buffer size - no h/w limit, you can increase as you like */
 111#define AZX_MAX_BUF_SIZE        (1024*1024*1024)
 112
 113/* RIRB int mask: overrun[2], response[0] */
 114#define RIRB_INT_RESPONSE       0x01
 115#define RIRB_INT_OVERRUN        0x04
 116#define RIRB_INT_MASK           0x05
 117
 118/* STATESTS int mask: S3,SD2,SD1,SD0 */
 119#define STATESTS_INT_MASK       ((1 << HDA_MAX_CODECS) - 1)
 120
 121/* SD_CTL bits */
 122#define SD_CTL_STREAM_RESET     0x01    /* stream reset bit */
 123#define SD_CTL_DMA_START        0x02    /* stream DMA start bit */
 124#define SD_CTL_STRIPE           (3 << 16)       /* stripe control */
 125#define SD_CTL_TRAFFIC_PRIO     (1 << 18)       /* traffic priority */
 126#define SD_CTL_DIR              (1 << 19)       /* bi-directional stream */
 127#define SD_CTL_STREAM_TAG_MASK  (0xf << 20)
 128#define SD_CTL_STREAM_TAG_SHIFT 20
 129
 130/* SD_CTL and SD_STS */
 131#define SD_INT_DESC_ERR         0x10    /* descriptor error interrupt */
 132#define SD_INT_FIFO_ERR         0x08    /* FIFO error interrupt */
 133#define SD_INT_COMPLETE         0x04    /* completion interrupt */
 134#define SD_INT_MASK             (SD_INT_DESC_ERR|SD_INT_FIFO_ERR|\
 135                                 SD_INT_COMPLETE)
 136
 137/* SD_STS */
 138#define SD_STS_FIFO_READY       0x20    /* FIFO ready */
 139
 140/* INTCTL and INTSTS */
 141#define AZX_INT_ALL_STREAM      0xff       /* all stream interrupts */
 142#define AZX_INT_CTRL_EN 0x40000000 /* controller interrupt enable bit */
 143#define AZX_INT_GLOBAL_EN       0x80000000 /* global interrupt enable bit */
 144
 145/* below are so far hardcoded - should read registers in future */
 146#define AZX_MAX_CORB_ENTRIES    256
 147#define AZX_MAX_RIRB_ENTRIES    256
 148
 149/* Capability header  Structure */
 150#define AZX_REG_CAP_HDR                 0x0
 151#define AZX_CAP_HDR_VER_OFF             28
 152#define AZX_CAP_HDR_VER_MASK            (0xF << AZX_CAP_HDR_VER_OFF)
 153#define AZX_CAP_HDR_ID_OFF              16
 154#define AZX_CAP_HDR_ID_MASK             (0xFFF << AZX_CAP_HDR_ID_OFF)
 155#define AZX_CAP_HDR_NXT_PTR_MASK        0xFFFF
 156
 157/* registers of Software Position Based FIFO Capability Structure */
 158#define AZX_SPB_CAP_ID                  0x4
 159#define AZX_REG_SPB_BASE_ADDR           0x700
 160#define AZX_REG_SPB_SPBFCH              0x00
 161#define AZX_REG_SPB_SPBFCCTL            0x04
 162/* Base used to calculate the iterating register offset */
 163#define AZX_SPB_BASE                    0x08
 164/* Interval used to calculate the iterating register offset */
 165#define AZX_SPB_INTERVAL                0x08
 166/* SPIB base */
 167#define AZX_SPB_SPIB                    0x00
 168/* SPIB MAXFIFO base*/
 169#define AZX_SPB_MAXFIFO                 0x04
 170
 171/* registers of Global Time Synchronization Capability Structure */
 172#define AZX_GTS_CAP_ID                  0x1
 173#define AZX_REG_GTS_GTSCH               0x00
 174#define AZX_REG_GTS_GTSCD               0x04
 175#define AZX_REG_GTS_GTSCTLAC            0x0C
 176#define AZX_GTS_BASE                    0x20
 177#define AZX_GTS_INTERVAL                0x20
 178
 179/* registers for Processing Pipe Capability Structure */
 180#define AZX_PP_CAP_ID                   0x3
 181#define AZX_REG_PP_PPCH                 0x10
 182#define AZX_REG_PP_PPCTL                0x04
 183#define AZX_PPCTL_PIE                   (1<<31)
 184#define AZX_PPCTL_GPROCEN               (1<<30)
 185/* _X_ = dma engine # and cannot * exceed 29 (per spec max 30 dma engines) */
 186#define AZX_PPCTL_PROCEN(_X_)           (1<<(_X_))
 187
 188#define AZX_REG_PP_PPSTS                0x08
 189
 190#define AZX_PPHC_BASE                   0x10
 191#define AZX_PPHC_INTERVAL               0x10
 192
 193#define AZX_REG_PPHCLLPL                0x0
 194#define AZX_REG_PPHCLLPU                0x4
 195#define AZX_REG_PPHCLDPL                0x8
 196#define AZX_REG_PPHCLDPU                0xC
 197
 198#define AZX_PPLC_BASE                   0x10
 199#define AZX_PPLC_MULTI                  0x10
 200#define AZX_PPLC_INTERVAL               0x10
 201
 202#define AZX_REG_PPLCCTL                 0x0
 203#define AZX_PPLCCTL_STRM_BITS           4
 204#define AZX_PPLCCTL_STRM_SHIFT          20
 205#define AZX_REG_MASK(bit_num, offset) \
 206        (((1 << (bit_num)) - 1) << (offset))
 207#define AZX_PPLCCTL_STRM_MASK \
 208        AZX_REG_MASK(AZX_PPLCCTL_STRM_BITS, AZX_PPLCCTL_STRM_SHIFT)
 209#define AZX_PPLCCTL_RUN                 (1<<1)
 210#define AZX_PPLCCTL_STRST               (1<<0)
 211
 212#define AZX_REG_PPLCFMT                 0x4
 213#define AZX_REG_PPLCLLPL                0x8
 214#define AZX_REG_PPLCLLPU                0xC
 215
 216/* registers for Multiple Links Capability Structure */
 217#define AZX_ML_CAP_ID                   0x2
 218#define AZX_REG_ML_MLCH                 0x00
 219#define AZX_REG_ML_MLCD                 0x04
 220#define AZX_ML_BASE                     0x40
 221#define AZX_ML_INTERVAL                 0x40
 222
 223#define AZX_REG_ML_LCAP                 0x00
 224#define AZX_REG_ML_LCTL                 0x04
 225#define AZX_REG_ML_LOSIDV               0x08
 226#define AZX_REG_ML_LSDIID               0x0C
 227#define AZX_REG_ML_LPSOO                0x10
 228#define AZX_REG_ML_LPSIO                0x12
 229#define AZX_REG_ML_LWALFC               0x18
 230#define AZX_REG_ML_LOUTPAY              0x20
 231#define AZX_REG_ML_LINPAY               0x30
 232
 233#define AZX_MLCTL_SPA                   (1<<16)
 234#define AZX_MLCTL_CPA                   23
 235
 236
 237/* registers for DMA Resume Capability Structure */
 238#define AZX_DRSM_CAP_ID                 0x5
 239#define AZX_REG_DRSM_CTL                0x4
 240/* Base used to calculate the iterating register offset */
 241#define AZX_DRSM_BASE                   0x08
 242/* Interval used to calculate the iterating register offset */
 243#define AZX_DRSM_INTERVAL               0x08
 244
 245/*
 246 * helpers to read the stream position
 247 */
 248static inline unsigned int
 249snd_hdac_stream_get_pos_lpib(struct hdac_stream *stream)
 250{
 251        return snd_hdac_stream_readl(stream, SD_LPIB);
 252}
 253
 254static inline unsigned int
 255snd_hdac_stream_get_pos_posbuf(struct hdac_stream *stream)
 256{
 257        return le32_to_cpu(*stream->posbuf);
 258}
 259
 260#endif /* __SOUND_HDA_REGISTER_H */
 261