1/* atmsap.h - ATM Service Access Point addressing definitions */ 2 3/* Written 1995-1999 by Werner Almesberger, EPFL LRC/ICA */ 4 5 6#ifndef _LINUX_ATMSAP_H 7#define _LINUX_ATMSAP_H 8 9#include <linux/atmapi.h> 10 11/* 12 * BEGIN_xx and END_xx markers are used for automatic generation of 13 * documentation. Do not change them. 14 */ 15 16 17/* 18 * Layer 2 protocol identifiers 19 */ 20 21/* BEGIN_L2 */ 22#define ATM_L2_NONE 0 /* L2 not specified */ 23#define ATM_L2_ISO1745 0x01 /* Basic mode ISO 1745 */ 24#define ATM_L2_Q291 0x02 /* ITU-T Q.291 (Rec. I.441) */ 25#define ATM_L2_X25_LL 0x06 /* ITU-T X.25, link layer */ 26#define ATM_L2_X25_ML 0x07 /* ITU-T X.25, multilink */ 27#define ATM_L2_LAPB 0x08 /* Extended LAPB, half-duplex (Rec. T.71) */ 28#define ATM_L2_HDLC_ARM 0x09 /* HDLC ARM (ISO/IEC 4335) */ 29#define ATM_L2_HDLC_NRM 0x0a /* HDLC NRM (ISO/IEC 4335) */ 30#define ATM_L2_HDLC_ABM 0x0b /* HDLC ABM (ISO/IEC 4335) */ 31#define ATM_L2_ISO8802 0x0c /* LAN LLC (ISO/IEC 8802/2) */ 32#define ATM_L2_X75 0x0d /* ITU-T X.75, SLP */ 33#define ATM_L2_Q922 0x0e /* ITU-T Q.922 */ 34#define ATM_L2_USER 0x10 /* user-specified */ 35#define ATM_L2_ISO7776 0x11 /* ISO 7776 DTE-DTE */ 36/* END_L2 */ 37 38 39/* 40 * Layer 3 protocol identifiers 41 */ 42 43/* BEGIN_L3 */ 44#define ATM_L3_NONE 0 /* L3 not specified */ 45#define ATM_L3_X25 0x06 /* ITU-T X.25, packet layer */ 46#define ATM_L3_ISO8208 0x07 /* ISO/IEC 8208 */ 47#define ATM_L3_X223 0x08 /* ITU-T X.223 | ISO/IEC 8878 */ 48#define ATM_L3_ISO8473 0x09 /* ITU-T X.233 | ISO/IEC 8473 */ 49#define ATM_L3_T70 0x0a /* ITU-T T.70 minimum network layer */ 50#define ATM_L3_TR9577 0x0b /* ISO/IEC TR 9577 */ 51#define ATM_L3_H310 0x0c /* ITU-T Recommendation H.310 */ 52#define ATM_L3_H321 0x0d /* ITU-T Recommendation H.321 */ 53#define ATM_L3_USER 0x10 /* user-specified */ 54/* END_L3 */ 55 56 57/* 58 * High layer identifiers 59 */ 60 61/* BEGIN_HL */ 62#define ATM_HL_NONE 0 /* HL not specified */ 63#define ATM_HL_ISO 0x01 /* ISO */ 64#define ATM_HL_USER 0x02 /* user-specific */ 65#define ATM_HL_HLP 0x03 /* high layer profile - UNI 3.0 only */ 66#define ATM_HL_VENDOR 0x04 /* vendor-specific application identifier */ 67/* END_HL */ 68 69 70/* 71 * ITU-T coded mode of operation 72 */ 73 74/* BEGIN_IMD */ 75#define ATM_IMD_NONE 0 /* mode not specified */ 76#define ATM_IMD_NORMAL 1 /* normal mode of operation */ 77#define ATM_IMD_EXTENDED 2 /* extended mode of operation */ 78/* END_IMD */ 79 80/* 81 * H.310 code points 82 */ 83 84#define ATM_TT_NONE 0 /* terminal type not specified */ 85#define ATM_TT_RX 1 /* receive only */ 86#define ATM_TT_TX 2 /* send only */ 87#define ATM_TT_RXTX 3 /* receive and send */ 88 89#define ATM_MC_NONE 0 /* no multiplexing */ 90#define ATM_MC_TS 1 /* transport stream (TS) */ 91#define ATM_MC_TS_FEC 2 /* transport stream with forward error corr. */ 92#define ATM_MC_PS 3 /* program stream (PS) */ 93#define ATM_MC_PS_FEC 4 /* program stream with forward error corr. */ 94#define ATM_MC_H221 5 /* ITU-T Rec. H.221 */ 95 96/* 97 * SAP structures 98 */ 99 100#define ATM_MAX_HLI 8 /* maximum high-layer information length */ 101 102 103struct atm_blli { 104 unsigned char l2_proto; /* layer 2 protocol */ 105 union { 106 struct { 107 unsigned char mode; /* mode of operation (ATM_IMD_xxx), 0 if */ 108 /* absent */ 109 unsigned char window; /* window size (k), 1-127 (0 to omit) */ 110 } itu; /* ITU-T encoding */ 111 unsigned char user; /* user-specified l2 information */ 112 } l2; 113 unsigned char l3_proto; /* layer 3 protocol */ 114 union { 115 struct { 116 unsigned char mode; /* mode of operation (ATM_IMD_xxx), 0 if */ 117 /* absent */ 118 unsigned char def_size; /* default packet size (log2), 4-12 (0 to */ 119 /* omit) */ 120 unsigned char window;/* packet window size, 1-127 (0 to omit) */ 121 } itu; /* ITU-T encoding */ 122 unsigned char user; /* user specified l3 information */ 123 struct { /* if l3_proto = ATM_L3_H310 */ 124 unsigned char term_type; /* terminal type */ 125 unsigned char fw_mpx_cap; /* forward multiplexing capability */ 126 /* only if term_type != ATM_TT_NONE */ 127 unsigned char bw_mpx_cap; /* backward multiplexing capability */ 128 /* only if term_type != ATM_TT_NONE */ 129 } h310; 130 struct { /* if l3_proto = ATM_L3_TR9577 */ 131 unsigned char ipi; /* initial protocol id */ 132 unsigned char snap[5];/* IEEE 802.1 SNAP identifier */ 133 /* (only if ipi == NLPID_IEEE802_1_SNAP) */ 134 } tr9577; 135 } l3; 136} __ATM_API_ALIGN; 137 138 139struct atm_bhli { 140 unsigned char hl_type; /* high layer information type */ 141 unsigned char hl_length; /* length (only if hl_type == ATM_HL_USER || */ 142 /* hl_type == ATM_HL_ISO) */ 143 unsigned char hl_info[ATM_MAX_HLI];/* high layer information */ 144}; 145 146 147#define ATM_MAX_BLLI 3 /* maximum number of BLLI elements */ 148 149 150struct atm_sap { 151 struct atm_bhli bhli; /* local SAP, high-layer information */ 152 struct atm_blli blli[ATM_MAX_BLLI] __ATM_API_ALIGN; 153 /* local SAP, low-layer info */ 154}; 155 156 157static __inline__ int blli_in_use(struct atm_blli blli) 158{ 159 return blli.l2_proto || blli.l3_proto; 160} 161 162#endif 163