LXR linux/net/wireless/mesh.c

   1#include <linux/ieee80211.h>
   2#include <linux/export.h>
   3#include <net/cfg80211.h>
   4#include "nl80211.h"
   5#include "core.h"
   6#include "rdev-ops.h"
   7
   8/* Default values, timeouts in ms */
   9#define MESH_TTL                31
  10#define MESH_DEFAULT_ELEMENT_TTL 31
  11#define MESH_MAX_RETR           3
  12#define MESH_RET_T              100
  13#define MESH_CONF_T             100
  14#define MESH_HOLD_T             100
  15
  16#define MESH_PATH_TIMEOUT       5000
  17#define MESH_RANN_INTERVAL      5000
  18#define MESH_PATH_TO_ROOT_TIMEOUT      6000
  19#define MESH_ROOT_INTERVAL     5000
  20#define MESH_ROOT_CONFIRMATION_INTERVAL 2000
  21#define MESH_DEFAULT_PLINK_TIMEOUT      1800 /* timeout in seconds */
  22
  23/*
  24 * Minimum interval between two consecutive PREQs originated by the same
  25 * interface
  26 */
  27#define MESH_PREQ_MIN_INT       10
  28#define MESH_PERR_MIN_INT       100
  29#define MESH_DIAM_TRAVERSAL_TIME 50
  30
  31#define MESH_RSSI_THRESHOLD     0
  32
  33/*
  34 * A path will be refreshed if it is used PATH_REFRESH_TIME milliseconds
  35 * before timing out.  This way it will remain ACTIVE and no data frames
  36 * will be unnecessarily held in the pending queue.
  37 */
  38#define MESH_PATH_REFRESH_TIME                  1000
  39#define MESH_MIN_DISCOVERY_TIMEOUT (2 * MESH_DIAM_TRAVERSAL_TIME)
  40
  41/* Default maximum number of established plinks per interface */
  42#define MESH_MAX_ESTAB_PLINKS   32
  43
  44#define MESH_MAX_PREQ_RETRIES   4
  45
  46#define MESH_SYNC_NEIGHBOR_OFFSET_MAX 50
  47
  48#define MESH_DEFAULT_BEACON_INTERVAL    1000    /* in 1024 us units (=TUs) */
  49#define MESH_DEFAULT_DTIM_PERIOD        2
  50#define MESH_DEFAULT_AWAKE_WINDOW       10      /* in 1024 us units (=TUs) */
  51
  52const struct mesh_config default_mesh_config = {
  53        .dot11MeshRetryTimeout = MESH_RET_T,
  54        .dot11MeshConfirmTimeout = MESH_CONF_T,
  55        .dot11MeshHoldingTimeout = MESH_HOLD_T,
  56        .dot11MeshMaxRetries = MESH_MAX_RETR,
  57        .dot11MeshTTL = MESH_TTL,
  58        .element_ttl = MESH_DEFAULT_ELEMENT_TTL,
  59        .auto_open_plinks = true,
  60        .dot11MeshMaxPeerLinks = MESH_MAX_ESTAB_PLINKS,
  61        .dot11MeshNbrOffsetMaxNeighbor = MESH_SYNC_NEIGHBOR_OFFSET_MAX,
  62        .dot11MeshHWMPactivePathTimeout = MESH_PATH_TIMEOUT,
  63        .dot11MeshHWMPpreqMinInterval = MESH_PREQ_MIN_INT,
  64        .dot11MeshHWMPperrMinInterval = MESH_PERR_MIN_INT,
  65        .dot11MeshHWMPnetDiameterTraversalTime = MESH_DIAM_TRAVERSAL_TIME,
  66        .dot11MeshHWMPmaxPREQretries = MESH_MAX_PREQ_RETRIES,
  67        .path_refresh_time = MESH_PATH_REFRESH_TIME,
  68        .min_discovery_timeout = MESH_MIN_DISCOVERY_TIMEOUT,
  69        .dot11MeshHWMPRannInterval = MESH_RANN_INTERVAL,
  70        .dot11MeshGateAnnouncementProtocol = false,
  71        .dot11MeshForwarding = true,
  72        .rssi_threshold = MESH_RSSI_THRESHOLD,
  73        .ht_opmode = IEEE80211_HT_OP_MODE_PROTECTION_NONHT_MIXED,
  74        .dot11MeshHWMPactivePathToRootTimeout = MESH_PATH_TO_ROOT_TIMEOUT,
  75        .dot11MeshHWMProotInterval = MESH_ROOT_INTERVAL,
  76        .dot11MeshHWMPconfirmationInterval = MESH_ROOT_CONFIRMATION_INTERVAL,
  77        .power_mode = NL80211_MESH_POWER_ACTIVE,
  78        .dot11MeshAwakeWindowDuration = MESH_DEFAULT_AWAKE_WINDOW,
  79        .plink_timeout = MESH_DEFAULT_PLINK_TIMEOUT,
  80};
  81
  82const struct mesh_setup default_mesh_setup = {
  83        /* cfg80211_join_mesh() will pick a channel if needed */
  84        .sync_method = IEEE80211_SYNC_METHOD_NEIGHBOR_OFFSET,
  85        .path_sel_proto = IEEE80211_PATH_PROTOCOL_HWMP,
  86        .path_metric = IEEE80211_PATH_METRIC_AIRTIME,
  87        .auth_id = 0, /* open */
  88        .ie = NULL,
  89        .ie_len = 0,
  90        .is_secure = false,
  91        .user_mpm = false,
  92        .beacon_interval = MESH_DEFAULT_BEACON_INTERVAL,
  93        .dtim_period = MESH_DEFAULT_DTIM_PERIOD,
  94};
  95
  96int __cfg80211_join_mesh(struct cfg80211_registered_device *rdev,
  97                         struct net_device *dev,
  98                         struct mesh_setup *setup,
  99                         const struct mesh_config *conf)
 100{
 101        struct wireless_dev *wdev = dev->ieee80211_ptr;
 102        int err;
 103
 104        BUILD_BUG_ON(IEEE80211_MAX_SSID_LEN != IEEE80211_MAX_MESH_ID_LEN);
 105
 106        ASSERT_WDEV_LOCK(wdev);
 107
 108        if (dev->ieee80211_ptr->iftype != NL80211_IFTYPE_MESH_POINT)
 109                return -EOPNOTSUPP;
 110
 111        if (!(rdev->wiphy.flags & WIPHY_FLAG_MESH_AUTH) &&
 112              setup->is_secure)
 113                return -EOPNOTSUPP;
 114
 115        if (wdev->mesh_id_len)
 116                return -EALREADY;
 117
 118        if (!setup->mesh_id_len)
 119                return -EINVAL;
 120
 121        if (!rdev->ops->join_mesh)
 122                return -EOPNOTSUPP;
 123
 124        if (!setup->chandef.chan) {
 125                /* if no channel explicitly given, use preset channel */
 126                setup->chandef = wdev->preset_chandef;
 127        }
 128
 129        if (!setup->chandef.chan) {
 130                /* if we don't have that either, use the first usable channel */
 131                enum ieee80211_band band;
 132
 133                for (band = 0; band < IEEE80211_NUM_BANDS; band++) {
 134                        struct ieee80211_supported_band *sband;
 135                        struct ieee80211_channel *chan;
 136                        int i;
 137
 138                        sband = rdev->wiphy.bands[band];
 139                        if (!sband)
 140                                continue;
 141
 142                        for (i = 0; i < sband->n_channels; i++) {
 143                                chan = &sband->channels[i];
 144                                if (chan->flags & (IEEE80211_CHAN_NO_IR |
 145                                                   IEEE80211_CHAN_DISABLED |
 146                                                   IEEE80211_CHAN_RADAR))
 147                                        continue;
 148                                setup->chandef.chan = chan;
 149                                break;
 150                        }
 151
 152                        if (setup->chandef.chan)
 153                                break;
 154                }
 155
 156                /* no usable channel ... */
 157                if (!setup->chandef.chan)
 158                        return -EINVAL;
 159
 160                setup->chandef.width = NL80211_CHAN_WIDTH_20_NOHT;
 161                setup->chandef.center_freq1 = setup->chandef.chan->center_freq;
 162        }
 163
 164        /*
 165         * check if basic rates are available otherwise use mandatory rates as
 166         * basic rates
 167         */
 168        if (!setup->basic_rates) {
 169                enum nl80211_bss_scan_width scan_width;
 170                struct ieee80211_supported_band *sband =
 171                                rdev->wiphy.bands[setup->chandef.chan->band];
 172                scan_width = cfg80211_chandef_to_scan_width(&setup->chandef);
 173                setup->basic_rates = ieee80211_mandatory_rates(sband,
 174                                                               scan_width);
 175        }
 176
 177        if (!cfg80211_reg_can_beacon(&rdev->wiphy, &setup->chandef,
 178                                     NL80211_IFTYPE_MESH_POINT))
 179                return -EINVAL;
 180
 181        err = rdev_join_mesh(rdev, dev, conf, setup);
 182        if (!err) {
 183                memcpy(wdev->ssid, setup->mesh_id, setup->mesh_id_len);
 184                wdev->mesh_id_len = setup->mesh_id_len;
 185                wdev->chandef = setup->chandef;
 186        }
 187
 188        return err;
 189}
 190
 191int cfg80211_join_mesh(struct cfg80211_registered_device *rdev,
 192                       struct net_device *dev,
 193                       struct mesh_setup *setup,
 194                       const struct mesh_config *conf)
 195{
 196        struct wireless_dev *wdev = dev->ieee80211_ptr;
 197        int err;
 198
 199        wdev_lock(wdev);
 200        err = __cfg80211_join_mesh(rdev, dev, setup, conf);
 201        wdev_unlock(wdev);
 202
 203        return err;
 204}
 205
 206int cfg80211_set_mesh_channel(struct cfg80211_registered_device *rdev,
 207                              struct wireless_dev *wdev,
 208                              struct cfg80211_chan_def *chandef)
 209{
 210        int err;
 211
 212        /*
 213         * Workaround for libertas (only!), it puts the interface
 214         * into mesh mode but doesn't implement join_mesh. Instead,
 215         * it is configured via sysfs and then joins the mesh when
 216         * you set the channel. Note that the libertas mesh isn't
 217         * compatible with 802.11 mesh.
 218         */
 219        if (rdev->ops->libertas_set_mesh_channel) {
 220                if (chandef->width != NL80211_CHAN_WIDTH_20_NOHT)
 221                        return -EINVAL;
 222
 223                if (!netif_running(wdev->netdev))
 224                        return -ENETDOWN;
 225
 226                err = rdev_libertas_set_mesh_channel(rdev, wdev->netdev,
 227                                                     chandef->chan);
 228                if (!err)
 229                        wdev->chandef = *chandef;
 230
 231                return err;
 232        }
 233
 234        if (wdev->mesh_id_len)
 235                return -EBUSY;
 236
 237        wdev->preset_chandef = *chandef;
 238        return 0;
 239}
 240
 241int __cfg80211_leave_mesh(struct cfg80211_registered_device *rdev,
 242                          struct net_device *dev)
 243{
 244        struct wireless_dev *wdev = dev->ieee80211_ptr;
 245        int err;
 246
 247        ASSERT_WDEV_LOCK(wdev);
 248
 249        if (dev->ieee80211_ptr->iftype != NL80211_IFTYPE_MESH_POINT)
 250                return -EOPNOTSUPP;
 251
 252        if (!rdev->ops->leave_mesh)
 253                return -EOPNOTSUPP;
 254
 255        if (!wdev->mesh_id_len)
 256                return -ENOTCONN;
 257
 258        err = rdev_leave_mesh(rdev, dev);
 259        if (!err) {
 260                wdev->mesh_id_len = 0;
 261                memset(&wdev->chandef, 0, sizeof(wdev->chandef));
 262                rdev_set_qos_map(rdev, dev, NULL);
 263        }
 264
 265        return err;
 266}
 267
 268int cfg80211_leave_mesh(struct cfg80211_registered_device *rdev,
 269                        struct net_device *dev)
 270{
 271        struct wireless_dev *wdev = dev->ieee80211_ptr;
 272        int err;
 273
 274        wdev_lock(wdev);
 275        err = __cfg80211_leave_mesh(rdev, dev);
 276        wdev_unlock(wdev);
 277
 278        return err;
 279}
 280