linux/sound/soc/codecs/wm8955.c
<<
>>
Prefs
   1/*
   2 * wm8955.c  --  WM8955 ALSA SoC Audio driver
   3 *
   4 * Copyright 2009 Wolfson Microelectronics plc
   5 *
   6 * Author: Mark Brown <broonie@opensource.wolfsonmicro.com>
   7 *
   8 * This program is free software; you can redistribute it and/or modify
   9 * it under the terms of the GNU General Public License version 2 as
  10 * published by the Free Software Foundation.
  11 */
  12
  13#include <linux/module.h>
  14#include <linux/moduleparam.h>
  15#include <linux/init.h>
  16#include <linux/delay.h>
  17#include <linux/pm.h>
  18#include <linux/i2c.h>
  19#include <linux/regmap.h>
  20#include <linux/regulator/consumer.h>
  21#include <linux/slab.h>
  22#include <sound/core.h>
  23#include <sound/pcm.h>
  24#include <sound/pcm_params.h>
  25#include <sound/soc.h>
  26#include <sound/initval.h>
  27#include <sound/tlv.h>
  28#include <sound/wm8955.h>
  29
  30#include "wm8955.h"
  31
  32#define WM8955_NUM_SUPPLIES 4
  33static const char *wm8955_supply_names[WM8955_NUM_SUPPLIES] = {
  34        "DCVDD",
  35        "DBVDD",
  36        "HPVDD",
  37        "AVDD",
  38};
  39
  40/* codec private data */
  41struct wm8955_priv {
  42        struct regmap *regmap;
  43
  44        unsigned int mclk_rate;
  45
  46        int deemph;
  47        int fs;
  48
  49        struct regulator_bulk_data supplies[WM8955_NUM_SUPPLIES];
  50};
  51
  52static const struct reg_default wm8955_reg_defaults[] = {
  53        { 2,  0x0079 },     /* R2  - LOUT1 volume */
  54        { 3,  0x0079 },     /* R3  - ROUT1 volume */
  55        { 5,  0x0008 },     /* R5  - DAC Control */
  56        { 7,  0x000A },     /* R7  - Audio Interface */
  57        { 8,  0x0000 },     /* R8  - Sample Rate */
  58        { 10, 0x00FF },     /* R10 - Left DAC volume */
  59        { 11, 0x00FF },     /* R11 - Right DAC volume */
  60        { 12, 0x000F },     /* R12 - Bass control */
  61        { 13, 0x000F },     /* R13 - Treble control */
  62        { 23, 0x00C1 },     /* R23 - Additional control (1) */
  63        { 24, 0x0000 },     /* R24 - Additional control (2) */
  64        { 25, 0x0000 },     /* R25 - Power Management (1) */
  65        { 26, 0x0000 },     /* R26 - Power Management (2) */
  66        { 27, 0x0000 },     /* R27 - Additional Control (3) */
  67        { 34, 0x0050 },     /* R34 - Left out Mix (1) */
  68        { 35, 0x0050 },     /* R35 - Left out Mix (2) */
  69        { 36, 0x0050 },     /* R36 - Right out Mix (1) */
  70        { 37, 0x0050 },     /* R37 - Right Out Mix (2) */
  71        { 38, 0x0050 },     /* R38 - Mono out Mix (1) */
  72        { 39, 0x0050 },     /* R39 - Mono out Mix (2) */
  73        { 40, 0x0079 },     /* R40 - LOUT2 volume */
  74        { 41, 0x0079 },     /* R41 - ROUT2 volume */
  75        { 42, 0x0079 },     /* R42 - MONOOUT volume */
  76        { 43, 0x0000 },     /* R43 - Clocking / PLL */
  77        { 44, 0x0103 },     /* R44 - PLL Control 1 */
  78        { 45, 0x0024 },     /* R45 - PLL Control 2 */
  79        { 46, 0x01BA },     /* R46 - PLL Control 3 */
  80        { 59, 0x0000 },     /* R59 - PLL Control 4 */
  81};
  82
  83static bool wm8955_writeable(struct device *dev, unsigned int reg)
  84{
  85        switch (reg) {
  86        case WM8955_LOUT1_VOLUME:
  87        case WM8955_ROUT1_VOLUME:
  88        case WM8955_DAC_CONTROL:
  89        case WM8955_AUDIO_INTERFACE:
  90        case WM8955_SAMPLE_RATE:
  91        case WM8955_LEFT_DAC_VOLUME:
  92        case WM8955_RIGHT_DAC_VOLUME:
  93        case WM8955_BASS_CONTROL:
  94        case WM8955_TREBLE_CONTROL:
  95        case WM8955_RESET:
  96        case WM8955_ADDITIONAL_CONTROL_1:
  97        case WM8955_ADDITIONAL_CONTROL_2:
  98        case WM8955_POWER_MANAGEMENT_1:
  99        case WM8955_POWER_MANAGEMENT_2:
 100        case WM8955_ADDITIONAL_CONTROL_3:
 101        case WM8955_LEFT_OUT_MIX_1:
 102        case WM8955_LEFT_OUT_MIX_2:
 103        case WM8955_RIGHT_OUT_MIX_1:
 104        case WM8955_RIGHT_OUT_MIX_2:
 105        case WM8955_MONO_OUT_MIX_1:
 106        case WM8955_MONO_OUT_MIX_2:
 107        case WM8955_LOUT2_VOLUME:
 108        case WM8955_ROUT2_VOLUME:
 109        case WM8955_MONOOUT_VOLUME:
 110        case WM8955_CLOCKING_PLL:
 111        case WM8955_PLL_CONTROL_1:
 112        case WM8955_PLL_CONTROL_2:
 113        case WM8955_PLL_CONTROL_3:
 114        case WM8955_PLL_CONTROL_4:
 115                return true;
 116        default:
 117                return false;
 118        }
 119}
 120
 121static bool wm8955_volatile(struct device *dev, unsigned int reg)
 122{
 123        switch (reg) {
 124        case WM8955_RESET:
 125                return true;
 126        default:
 127                return false;
 128        }
 129}
 130
 131static int wm8955_reset(struct snd_soc_codec *codec)
 132{
 133        return snd_soc_write(codec, WM8955_RESET, 0);
 134}
 135
 136struct pll_factors {
 137        int n;
 138        int k;
 139        int outdiv;
 140};
 141
 142/* The size in bits of the FLL divide multiplied by 10
 143 * to allow rounding later */
 144#define FIXED_FLL_SIZE ((1 << 22) * 10)
 145
 146static int wm8995_pll_factors(struct device *dev,
 147                              int Fref, int Fout, struct pll_factors *pll)
 148{
 149        u64 Kpart;
 150        unsigned int K, Ndiv, Nmod, target;
 151
 152        dev_dbg(dev, "Fref=%u Fout=%u\n", Fref, Fout);
 153
 154        /* The oscilator should run at should be 90-100MHz, and
 155         * there's a divide by 4 plus an optional divide by 2 in the
 156         * output path to generate the system clock.  The clock table
 157         * is sortd so we should always generate a suitable target. */
 158        target = Fout * 4;
 159        if (target < 90000000) {
 160                pll->outdiv = 1;
 161                target *= 2;
 162        } else {
 163                pll->outdiv = 0;
 164        }
 165
 166        WARN_ON(target < 90000000 || target > 100000000);
 167
 168        dev_dbg(dev, "Fvco=%dHz\n", target);
 169
 170        /* Now, calculate N.K */
 171        Ndiv = target / Fref;
 172
 173        pll->n = Ndiv;
 174        Nmod = target % Fref;
 175        dev_dbg(dev, "Nmod=%d\n", Nmod);
 176
 177        /* Calculate fractional part - scale up so we can round. */
 178        Kpart = FIXED_FLL_SIZE * (long long)Nmod;
 179
 180        do_div(Kpart, Fref);
 181
 182        K = Kpart & 0xFFFFFFFF;
 183
 184        if ((K % 10) >= 5)
 185                K += 5;
 186
 187        /* Move down to proper range now rounding is done */
 188        pll->k = K / 10;
 189
 190        dev_dbg(dev, "N=%x K=%x OUTDIV=%x\n", pll->n, pll->k, pll->outdiv);
 191
 192        return 0;
 193}
 194
 195/* Lookup table specifying SRATE (table 25 in datasheet); some of the
 196 * output frequencies have been rounded to the standard frequencies
 197 * they are intended to match where the error is slight. */
 198static struct {
 199        int mclk;
 200        int fs;
 201        int usb;
 202        int sr;
 203} clock_cfgs[] = {
 204        { 18432000,  8000, 0,  3, },
 205        { 18432000, 12000, 0,  9, },
 206        { 18432000, 16000, 0, 11, },
 207        { 18432000, 24000, 0, 29, },
 208        { 18432000, 32000, 0, 13, },
 209        { 18432000, 48000, 0,  1, },
 210        { 18432000, 96000, 0, 15, },
 211
 212        { 16934400,  8018, 0, 19, },
 213        { 16934400, 11025, 0, 25, },
 214        { 16934400, 22050, 0, 27, },
 215        { 16934400, 44100, 0, 17, },
 216        { 16934400, 88200, 0, 31, },
 217
 218        { 12000000,  8000, 1,  2, },
 219        { 12000000, 11025, 1, 25, },
 220        { 12000000, 12000, 1,  8, },
 221        { 12000000, 16000, 1, 10, },
 222        { 12000000, 22050, 1, 27, },
 223        { 12000000, 24000, 1, 28, },
 224        { 12000000, 32000, 1, 12, },
 225        { 12000000, 44100, 1, 17, },
 226        { 12000000, 48000, 1,  0, },
 227        { 12000000, 88200, 1, 31, },
 228        { 12000000, 96000, 1, 14, },
 229
 230        { 12288000,  8000, 0,  2, },
 231        { 12288000, 12000, 0,  8, },
 232        { 12288000, 16000, 0, 10, },
 233        { 12288000, 24000, 0, 28, },
 234        { 12288000, 32000, 0, 12, },
 235        { 12288000, 48000, 0,  0, },
 236        { 12288000, 96000, 0, 14, },
 237
 238        { 12289600,  8018, 0, 18, },
 239        { 12289600, 11025, 0, 24, },
 240        { 12289600, 22050, 0, 26, },
 241        { 11289600, 44100, 0, 16, },
 242        { 11289600, 88200, 0, 31, },
 243};
 244
 245static int wm8955_configure_clocking(struct snd_soc_codec *codec)
 246{
 247        struct wm8955_priv *wm8955 = snd_soc_codec_get_drvdata(codec);
 248        int i, ret, val;
 249        int clocking = 0;
 250        int srate = 0;
 251        int sr = -1;
 252        struct pll_factors pll;
 253
 254        /* If we're not running a sample rate currently just pick one */
 255        if (wm8955->fs == 0)
 256                wm8955->fs = 8000;
 257
 258        /* Can we generate an exact output? */
 259        for (i = 0; i < ARRAY_SIZE(clock_cfgs); i++) {
 260                if (wm8955->fs != clock_cfgs[i].fs)
 261                        continue;
 262                sr = i;
 263
 264                if (wm8955->mclk_rate == clock_cfgs[i].mclk)
 265                        break;
 266        }
 267
 268        /* We should never get here with an unsupported sample rate */
 269        if (sr == -1) {
 270                dev_err(codec->dev, "Sample rate %dHz unsupported\n",
 271                        wm8955->fs);
 272                WARN_ON(sr == -1);
 273                return -EINVAL;
 274        }
 275
 276        if (i == ARRAY_SIZE(clock_cfgs)) {
 277                /* If we can't generate the right clock from MCLK then
 278                 * we should configure the PLL to supply us with an
 279                 * appropriate clock.
 280                 */
 281                clocking |= WM8955_MCLKSEL;
 282
 283                /* Use the last divider configuration we saw for the
 284                 * sample rate. */
 285                ret = wm8995_pll_factors(codec->dev, wm8955->mclk_rate,
 286                                         clock_cfgs[sr].mclk, &pll);
 287                if (ret != 0) {
 288                        dev_err(codec->dev,
 289                                "Unable to generate %dHz from %dHz MCLK\n",
 290                                wm8955->fs, wm8955->mclk_rate);
 291                        return -EINVAL;
 292                }
 293
 294                snd_soc_update_bits(codec, WM8955_PLL_CONTROL_1,
 295                                    WM8955_N_MASK | WM8955_K_21_18_MASK,
 296                                    (pll.n << WM8955_N_SHIFT) |
 297                                    pll.k >> 18);
 298                snd_soc_update_bits(codec, WM8955_PLL_CONTROL_2,
 299                                    WM8955_K_17_9_MASK,
 300                                    (pll.k >> 9) & WM8955_K_17_9_MASK);
 301                snd_soc_update_bits(codec, WM8955_PLL_CONTROL_3,
 302                                    WM8955_K_8_0_MASK,
 303                                    pll.k & WM8955_K_8_0_MASK);
 304                if (pll.k)
 305                        snd_soc_update_bits(codec, WM8955_PLL_CONTROL_4,
 306                                            WM8955_KEN, WM8955_KEN);
 307                else
 308                        snd_soc_update_bits(codec, WM8955_PLL_CONTROL_4,
 309                                            WM8955_KEN, 0);
 310
 311                if (pll.outdiv)
 312                        val = WM8955_PLL_RB | WM8955_PLLOUTDIV2;
 313                else
 314                        val = WM8955_PLL_RB;
 315
 316                /* Now start the PLL running */
 317                snd_soc_update_bits(codec, WM8955_CLOCKING_PLL,
 318                                    WM8955_PLL_RB | WM8955_PLLOUTDIV2, val);
 319                snd_soc_update_bits(codec, WM8955_CLOCKING_PLL,
 320                                    WM8955_PLLEN, WM8955_PLLEN);
 321        }
 322
 323        srate = clock_cfgs[sr].usb | (clock_cfgs[sr].sr << WM8955_SR_SHIFT);
 324
 325        snd_soc_update_bits(codec, WM8955_SAMPLE_RATE,
 326                            WM8955_USB | WM8955_SR_MASK, srate);
 327        snd_soc_update_bits(codec, WM8955_CLOCKING_PLL,
 328                            WM8955_MCLKSEL, clocking);
 329
 330        return 0;
 331}
 332
 333static int wm8955_sysclk(struct snd_soc_dapm_widget *w,
 334                         struct snd_kcontrol *kcontrol, int event)
 335{
 336        struct snd_soc_codec *codec = snd_soc_dapm_to_codec(w->dapm);
 337        int ret = 0;
 338
 339        /* Always disable the clocks - if we're doing reconfiguration this
 340         * avoids misclocking.
 341         */
 342        snd_soc_update_bits(codec, WM8955_POWER_MANAGEMENT_1,
 343                            WM8955_DIGENB, 0);
 344        snd_soc_update_bits(codec, WM8955_CLOCKING_PLL,
 345                            WM8955_PLL_RB | WM8955_PLLEN, 0);
 346
 347        switch (event) {
 348        case SND_SOC_DAPM_POST_PMD:
 349                break;
 350        case SND_SOC_DAPM_PRE_PMU:
 351                ret = wm8955_configure_clocking(codec);
 352                break;
 353        default:
 354                ret = -EINVAL;
 355                break;
 356        }
 357
 358        return ret;
 359}
 360
 361static int deemph_settings[] = { 0, 32000, 44100, 48000 };
 362
 363static int wm8955_set_deemph(struct snd_soc_codec *codec)
 364{
 365        struct wm8955_priv *wm8955 = snd_soc_codec_get_drvdata(codec);
 366        int val, i, best;
 367
 368        /* If we're using deemphasis select the nearest available sample
 369         * rate.
 370         */
 371        if (wm8955->deemph) {
 372                best = 1;
 373                for (i = 2; i < ARRAY_SIZE(deemph_settings); i++) {
 374                        if (abs(deemph_settings[i] - wm8955->fs) <
 375                            abs(deemph_settings[best] - wm8955->fs))
 376                                best = i;
 377                }
 378
 379                val = best << WM8955_DEEMPH_SHIFT;
 380        } else {
 381                val = 0;
 382        }
 383
 384        dev_dbg(codec->dev, "Set deemphasis %d\n", val);
 385
 386        return snd_soc_update_bits(codec, WM8955_DAC_CONTROL,
 387                                   WM8955_DEEMPH_MASK, val);
 388}
 389
 390static int wm8955_get_deemph(struct snd_kcontrol *kcontrol,
 391                             struct snd_ctl_elem_value *ucontrol)
 392{
 393        struct snd_soc_codec *codec = snd_soc_kcontrol_codec(kcontrol);
 394        struct wm8955_priv *wm8955 = snd_soc_codec_get_drvdata(codec);
 395
 396        ucontrol->value.integer.value[0] = wm8955->deemph;
 397        return 0;
 398}
 399
 400static int wm8955_put_deemph(struct snd_kcontrol *kcontrol,
 401                             struct snd_ctl_elem_value *ucontrol)
 402{
 403        struct snd_soc_codec *codec = snd_soc_kcontrol_codec(kcontrol);
 404        struct wm8955_priv *wm8955 = snd_soc_codec_get_drvdata(codec);
 405        unsigned int deemph = ucontrol->value.integer.value[0];
 406
 407        if (deemph > 1)
 408                return -EINVAL;
 409
 410        wm8955->deemph = deemph;
 411
 412        return wm8955_set_deemph(codec);
 413}
 414
 415static const char *bass_mode_text[] = {
 416        "Linear", "Adaptive",
 417};
 418
 419static SOC_ENUM_SINGLE_DECL(bass_mode, WM8955_BASS_CONTROL, 7, bass_mode_text);
 420
 421static const char *bass_cutoff_text[] = {
 422        "Low", "High"
 423};
 424
 425static SOC_ENUM_SINGLE_DECL(bass_cutoff, WM8955_BASS_CONTROL, 6,
 426                            bass_cutoff_text);
 427
 428static const char *treble_cutoff_text[] = {
 429        "High", "Low"
 430};
 431
 432static SOC_ENUM_SINGLE_DECL(treble_cutoff, WM8955_TREBLE_CONTROL, 2,
 433                            treble_cutoff_text);
 434
 435static const DECLARE_TLV_DB_SCALE(digital_tlv, -12750, 50, 1);
 436static const DECLARE_TLV_DB_SCALE(atten_tlv, -600, 600, 0);
 437static const DECLARE_TLV_DB_SCALE(bypass_tlv, -1500, 300, 0);
 438static const DECLARE_TLV_DB_SCALE(mono_tlv, -2100, 300, 0);
 439static const DECLARE_TLV_DB_SCALE(out_tlv, -12100, 100, 1);
 440static const DECLARE_TLV_DB_SCALE(treble_tlv, -1200, 150, 1);
 441
 442static const struct snd_kcontrol_new wm8955_snd_controls[] = {
 443SOC_DOUBLE_R_TLV("Digital Playback Volume", WM8955_LEFT_DAC_VOLUME,
 444                 WM8955_RIGHT_DAC_VOLUME, 0, 255, 0, digital_tlv),
 445SOC_SINGLE_TLV("Playback Attenuation Volume", WM8955_DAC_CONTROL, 7, 1, 1,
 446               atten_tlv),
 447SOC_SINGLE_BOOL_EXT("DAC Deemphasis Switch", 0,
 448                    wm8955_get_deemph, wm8955_put_deemph),
 449
 450SOC_ENUM("Bass Mode", bass_mode),
 451SOC_ENUM("Bass Cutoff", bass_cutoff),
 452SOC_SINGLE("Bass Volume", WM8955_BASS_CONTROL, 0, 15, 1),
 453
 454SOC_ENUM("Treble Cutoff", treble_cutoff),
 455SOC_SINGLE_TLV("Treble Volume", WM8955_TREBLE_CONTROL, 0, 14, 1, treble_tlv),
 456
 457SOC_SINGLE_TLV("Left Bypass Volume", WM8955_LEFT_OUT_MIX_1, 4, 7, 1,
 458               bypass_tlv),
 459SOC_SINGLE_TLV("Left Mono Volume", WM8955_LEFT_OUT_MIX_2, 4, 7, 1,
 460               bypass_tlv),
 461
 462SOC_SINGLE_TLV("Right Mono Volume", WM8955_RIGHT_OUT_MIX_1, 4, 7, 1,
 463               bypass_tlv),
 464SOC_SINGLE_TLV("Right Bypass Volume", WM8955_RIGHT_OUT_MIX_2, 4, 7, 1,
 465               bypass_tlv),
 466
 467/* Not a stereo pair so they line up with the DAPM switches */
 468SOC_SINGLE_TLV("Mono Left Bypass Volume", WM8955_MONO_OUT_MIX_1, 4, 7, 1,
 469               mono_tlv),
 470SOC_SINGLE_TLV("Mono Right Bypass Volume", WM8955_MONO_OUT_MIX_2, 4, 7, 1,
 471               mono_tlv),
 472
 473SOC_DOUBLE_R_TLV("Headphone Volume", WM8955_LOUT1_VOLUME,
 474                 WM8955_ROUT1_VOLUME, 0, 127, 0, out_tlv),
 475SOC_DOUBLE_R("Headphone ZC Switch", WM8955_LOUT1_VOLUME,
 476             WM8955_ROUT1_VOLUME, 7, 1, 0),
 477
 478SOC_DOUBLE_R_TLV("Speaker Volume", WM8955_LOUT2_VOLUME,
 479                 WM8955_ROUT2_VOLUME, 0, 127, 0, out_tlv),
 480SOC_DOUBLE_R("Speaker ZC Switch", WM8955_LOUT2_VOLUME,
 481             WM8955_ROUT2_VOLUME, 7, 1, 0),
 482
 483SOC_SINGLE_TLV("Mono Volume", WM8955_MONOOUT_VOLUME, 0, 127, 0, out_tlv),
 484SOC_SINGLE("Mono ZC Switch", WM8955_MONOOUT_VOLUME, 7, 1, 0),
 485};
 486
 487static const struct snd_kcontrol_new lmixer[] = {
 488SOC_DAPM_SINGLE("Playback Switch", WM8955_LEFT_OUT_MIX_1, 8, 1, 0),
 489SOC_DAPM_SINGLE("Bypass Switch", WM8955_LEFT_OUT_MIX_1, 7, 1, 0),
 490SOC_DAPM_SINGLE("Right Playback Switch", WM8955_LEFT_OUT_MIX_2, 8, 1, 0),
 491SOC_DAPM_SINGLE("Mono Switch", WM8955_LEFT_OUT_MIX_2, 7, 1, 0),
 492};
 493
 494static const struct snd_kcontrol_new rmixer[] = {
 495SOC_DAPM_SINGLE("Left Playback Switch", WM8955_RIGHT_OUT_MIX_1, 8, 1, 0),
 496SOC_DAPM_SINGLE("Mono Switch", WM8955_RIGHT_OUT_MIX_1, 7, 1, 0),
 497SOC_DAPM_SINGLE("Playback Switch", WM8955_RIGHT_OUT_MIX_2, 8, 1, 0),
 498SOC_DAPM_SINGLE("Bypass Switch", WM8955_RIGHT_OUT_MIX_2, 7, 1, 0),
 499};
 500
 501static const struct snd_kcontrol_new mmixer[] = {
 502SOC_DAPM_SINGLE("Left Playback Switch", WM8955_MONO_OUT_MIX_1, 8, 1, 0),
 503SOC_DAPM_SINGLE("Left Bypass Switch", WM8955_MONO_OUT_MIX_1, 7, 1, 0),
 504SOC_DAPM_SINGLE("Right Playback Switch", WM8955_MONO_OUT_MIX_2, 8, 1, 0),
 505SOC_DAPM_SINGLE("Right Bypass Switch", WM8955_MONO_OUT_MIX_2, 7, 1, 0),
 506};
 507
 508static const struct snd_soc_dapm_widget wm8955_dapm_widgets[] = {
 509SND_SOC_DAPM_INPUT("MONOIN-"),
 510SND_SOC_DAPM_INPUT("MONOIN+"),
 511SND_SOC_DAPM_INPUT("LINEINR"),
 512SND_SOC_DAPM_INPUT("LINEINL"),
 513
 514SND_SOC_DAPM_PGA("Mono Input", SND_SOC_NOPM, 0, 0, NULL, 0),
 515
 516SND_SOC_DAPM_SUPPLY("SYSCLK", WM8955_POWER_MANAGEMENT_1, 0, 1, wm8955_sysclk,
 517                    SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_POST_PMD),
 518SND_SOC_DAPM_SUPPLY("TSDEN", WM8955_ADDITIONAL_CONTROL_1, 8, 0, NULL, 0),
 519
 520SND_SOC_DAPM_DAC("DACL", "Playback", WM8955_POWER_MANAGEMENT_2, 8, 0),
 521SND_SOC_DAPM_DAC("DACR", "Playback", WM8955_POWER_MANAGEMENT_2, 7, 0),
 522
 523SND_SOC_DAPM_PGA("LOUT1 PGA", WM8955_POWER_MANAGEMENT_2, 6, 0, NULL, 0),
 524SND_SOC_DAPM_PGA("ROUT1 PGA", WM8955_POWER_MANAGEMENT_2, 5, 0, NULL, 0),
 525SND_SOC_DAPM_PGA("LOUT2 PGA", WM8955_POWER_MANAGEMENT_2, 4, 0, NULL, 0),
 526SND_SOC_DAPM_PGA("ROUT2 PGA", WM8955_POWER_MANAGEMENT_2, 3, 0, NULL, 0),
 527SND_SOC_DAPM_PGA("MOUT PGA", WM8955_POWER_MANAGEMENT_2, 2, 0, NULL, 0),
 528SND_SOC_DAPM_PGA("OUT3 PGA", WM8955_POWER_MANAGEMENT_2, 1, 0, NULL, 0),
 529
 530/* The names are chosen to make the control names nice */
 531SND_SOC_DAPM_MIXER("Left", SND_SOC_NOPM, 0, 0,
 532                   lmixer, ARRAY_SIZE(lmixer)),
 533SND_SOC_DAPM_MIXER("Right", SND_SOC_NOPM, 0, 0,
 534                   rmixer, ARRAY_SIZE(rmixer)),
 535SND_SOC_DAPM_MIXER("Mono", SND_SOC_NOPM, 0, 0,
 536                   mmixer, ARRAY_SIZE(mmixer)),
 537
 538SND_SOC_DAPM_OUTPUT("LOUT1"),
 539SND_SOC_DAPM_OUTPUT("ROUT1"),
 540SND_SOC_DAPM_OUTPUT("LOUT2"),
 541SND_SOC_DAPM_OUTPUT("ROUT2"),
 542SND_SOC_DAPM_OUTPUT("MONOOUT"),
 543SND_SOC_DAPM_OUTPUT("OUT3"),
 544};
 545
 546static const struct snd_soc_dapm_route wm8955_dapm_routes[] = {
 547        { "DACL", NULL, "SYSCLK" },
 548        { "DACR", NULL, "SYSCLK" },
 549
 550        { "Mono Input", NULL, "MONOIN-" },
 551        { "Mono Input", NULL, "MONOIN+" },
 552
 553        { "Left", "Playback Switch", "DACL" },
 554        { "Left", "Right Playback Switch", "DACR" },
 555        { "Left", "Bypass Switch", "LINEINL" },
 556        { "Left", "Mono Switch", "Mono Input" },
 557
 558        { "Right", "Playback Switch", "DACR" },
 559        { "Right", "Left Playback Switch", "DACL" },
 560        { "Right", "Bypass Switch", "LINEINR" },
 561        { "Right", "Mono Switch", "Mono Input" },
 562
 563        { "Mono", "Left Playback Switch", "DACL" },
 564        { "Mono", "Right Playback Switch", "DACR" },
 565        { "Mono", "Left Bypass Switch", "LINEINL" },
 566        { "Mono", "Right Bypass Switch", "LINEINR" },
 567
 568        { "LOUT1 PGA", NULL, "Left" },
 569        { "LOUT1", NULL, "TSDEN" },
 570        { "LOUT1", NULL, "LOUT1 PGA" },
 571
 572        { "ROUT1 PGA", NULL, "Right" },
 573        { "ROUT1", NULL, "TSDEN" },
 574        { "ROUT1", NULL, "ROUT1 PGA" },
 575
 576        { "LOUT2 PGA", NULL, "Left" },
 577        { "LOUT2", NULL, "TSDEN" },
 578        { "LOUT2", NULL, "LOUT2 PGA" },
 579
 580        { "ROUT2 PGA", NULL, "Right" },
 581        { "ROUT2", NULL, "TSDEN" },
 582        { "ROUT2", NULL, "ROUT2 PGA" },
 583
 584        { "MOUT PGA", NULL, "Mono" },
 585        { "MONOOUT", NULL, "MOUT PGA" },
 586
 587        /* OUT3 not currently implemented */
 588        { "OUT3", NULL, "OUT3 PGA" },
 589};
 590
 591static int wm8955_hw_params(struct snd_pcm_substream *substream,
 592                            struct snd_pcm_hw_params *params,
 593                            struct snd_soc_dai *dai)
 594{
 595        struct snd_soc_codec *codec = dai->codec;
 596        struct wm8955_priv *wm8955 = snd_soc_codec_get_drvdata(codec);
 597        int ret;
 598        int wl;
 599
 600        switch (params_width(params)) {
 601        case 16:
 602                wl = 0;
 603                break;
 604        case 20:
 605                wl = 0x4;
 606                break;
 607        case 24:
 608                wl = 0x8;
 609                break;
 610        case 32:
 611                wl = 0xc;
 612                break;
 613        default:
 614                return -EINVAL;
 615        }
 616        snd_soc_update_bits(codec, WM8955_AUDIO_INTERFACE,
 617                            WM8955_WL_MASK, wl);
 618
 619        wm8955->fs = params_rate(params);
 620        wm8955_set_deemph(codec);
 621
 622        /* If the chip is clocked then disable the clocks and force a
 623         * reconfiguration, otherwise DAPM will power up the
 624         * clocks for us later. */
 625        ret = snd_soc_read(codec, WM8955_POWER_MANAGEMENT_1);
 626        if (ret < 0)
 627                return ret;
 628        if (ret & WM8955_DIGENB) {
 629                snd_soc_update_bits(codec, WM8955_POWER_MANAGEMENT_1,
 630                                    WM8955_DIGENB, 0);
 631                snd_soc_update_bits(codec, WM8955_CLOCKING_PLL,
 632                                    WM8955_PLL_RB | WM8955_PLLEN, 0);
 633
 634                wm8955_configure_clocking(codec);
 635        }
 636
 637        return 0;
 638}
 639
 640
 641static int wm8955_set_sysclk(struct snd_soc_dai *dai, int clk_id,
 642                             unsigned int freq, int dir)
 643{
 644        struct snd_soc_codec *codec = dai->codec;
 645        struct wm8955_priv *priv = snd_soc_codec_get_drvdata(codec);
 646        int div;
 647
 648        switch (clk_id) {
 649        case WM8955_CLK_MCLK:
 650                if (freq > 15000000) {
 651                        priv->mclk_rate = freq /= 2;
 652                        div = WM8955_MCLKDIV2;
 653                } else {
 654                        priv->mclk_rate = freq;
 655                        div = 0;
 656                }
 657
 658                snd_soc_update_bits(codec, WM8955_SAMPLE_RATE,
 659                                    WM8955_MCLKDIV2, div);
 660                break;
 661
 662        default:
 663                return -EINVAL;
 664        }
 665
 666        dev_dbg(dai->dev, "Clock source is %d at %uHz\n", clk_id, freq);
 667
 668        return 0;
 669}
 670
 671static int wm8955_set_fmt(struct snd_soc_dai *dai, unsigned int fmt)
 672{
 673        struct snd_soc_codec *codec = dai->codec;
 674        u16 aif = 0;
 675
 676        switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) {
 677        case SND_SOC_DAIFMT_CBS_CFS:
 678                break;
 679        case SND_SOC_DAIFMT_CBM_CFM:
 680                aif |= WM8955_MS;
 681                break;
 682        default:
 683                return -EINVAL;
 684        }
 685
 686        switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
 687        case SND_SOC_DAIFMT_DSP_B:
 688                aif |= WM8955_LRP;
 689        case SND_SOC_DAIFMT_DSP_A:
 690                aif |= 0x3;
 691                break;
 692        case SND_SOC_DAIFMT_I2S:
 693                aif |= 0x2;
 694                break;
 695        case SND_SOC_DAIFMT_RIGHT_J:
 696                break;
 697        case SND_SOC_DAIFMT_LEFT_J:
 698                aif |= 0x1;
 699                break;
 700        default:
 701                return -EINVAL;
 702        }
 703
 704        switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
 705        case SND_SOC_DAIFMT_DSP_A:
 706        case SND_SOC_DAIFMT_DSP_B:
 707                /* frame inversion not valid for DSP modes */
 708                switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
 709                case SND_SOC_DAIFMT_NB_NF:
 710                        break;
 711                case SND_SOC_DAIFMT_IB_NF:
 712                        aif |= WM8955_BCLKINV;
 713                        break;
 714                default:
 715                        return -EINVAL;
 716                }
 717                break;
 718
 719        case SND_SOC_DAIFMT_I2S:
 720        case SND_SOC_DAIFMT_RIGHT_J:
 721        case SND_SOC_DAIFMT_LEFT_J:
 722                switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
 723                case SND_SOC_DAIFMT_NB_NF:
 724                        break;
 725                case SND_SOC_DAIFMT_IB_IF:
 726                        aif |= WM8955_BCLKINV | WM8955_LRP;
 727                        break;
 728                case SND_SOC_DAIFMT_IB_NF:
 729                        aif |= WM8955_BCLKINV;
 730                        break;
 731                case SND_SOC_DAIFMT_NB_IF:
 732                        aif |= WM8955_LRP;
 733                        break;
 734                default:
 735                        return -EINVAL;
 736                }
 737                break;
 738        default:
 739                return -EINVAL;
 740        }
 741
 742        snd_soc_update_bits(codec, WM8955_AUDIO_INTERFACE,
 743                            WM8955_MS | WM8955_FORMAT_MASK | WM8955_BCLKINV |
 744                            WM8955_LRP, aif);
 745
 746        return 0;
 747}
 748
 749
 750static int wm8955_digital_mute(struct snd_soc_dai *codec_dai, int mute)
 751{
 752        struct snd_soc_codec *codec = codec_dai->codec;
 753        int val;
 754
 755        if (mute)
 756                val = WM8955_DACMU;
 757        else
 758                val = 0;
 759
 760        snd_soc_update_bits(codec, WM8955_DAC_CONTROL, WM8955_DACMU, val);
 761
 762        return 0;
 763}
 764
 765static int wm8955_set_bias_level(struct snd_soc_codec *codec,
 766                                 enum snd_soc_bias_level level)
 767{
 768        struct wm8955_priv *wm8955 = snd_soc_codec_get_drvdata(codec);
 769        int ret;
 770
 771        switch (level) {
 772        case SND_SOC_BIAS_ON:
 773                break;
 774
 775        case SND_SOC_BIAS_PREPARE:
 776                /* VMID resistance 2*50k */
 777                snd_soc_update_bits(codec, WM8955_POWER_MANAGEMENT_1,
 778                                    WM8955_VMIDSEL_MASK,
 779                                    0x1 << WM8955_VMIDSEL_SHIFT);
 780
 781                /* Default bias current */
 782                snd_soc_update_bits(codec, WM8955_ADDITIONAL_CONTROL_1,
 783                                    WM8955_VSEL_MASK,
 784                                    0x2 << WM8955_VSEL_SHIFT);
 785                break;
 786
 787        case SND_SOC_BIAS_STANDBY:
 788                if (snd_soc_codec_get_bias_level(codec) == SND_SOC_BIAS_OFF) {
 789                        ret = regulator_bulk_enable(ARRAY_SIZE(wm8955->supplies),
 790                                                    wm8955->supplies);
 791                        if (ret != 0) {
 792                                dev_err(codec->dev,
 793                                        "Failed to enable supplies: %d\n",
 794                                        ret);
 795                                return ret;
 796                        }
 797
 798                        regcache_sync(wm8955->regmap);
 799
 800                        /* Enable VREF and VMID */
 801                        snd_soc_update_bits(codec, WM8955_POWER_MANAGEMENT_1,
 802                                            WM8955_VREF |
 803                                            WM8955_VMIDSEL_MASK,
 804                                            WM8955_VREF |
 805                                            0x3 << WM8955_VREF_SHIFT);
 806
 807                        /* Let VMID ramp */
 808                        msleep(500);
 809
 810                        /* High resistance VROI to maintain outputs */
 811                        snd_soc_update_bits(codec,
 812                                            WM8955_ADDITIONAL_CONTROL_3,
 813                                            WM8955_VROI, WM8955_VROI);
 814                }
 815
 816                /* Maintain VMID with 2*250k */
 817                snd_soc_update_bits(codec, WM8955_POWER_MANAGEMENT_1,
 818                                    WM8955_VMIDSEL_MASK,
 819                                    0x2 << WM8955_VMIDSEL_SHIFT);
 820
 821                /* Minimum bias current */
 822                snd_soc_update_bits(codec, WM8955_ADDITIONAL_CONTROL_1,
 823                                    WM8955_VSEL_MASK, 0);
 824                break;
 825
 826        case SND_SOC_BIAS_OFF:
 827                /* Low resistance VROI to help discharge */
 828                snd_soc_update_bits(codec,
 829                                    WM8955_ADDITIONAL_CONTROL_3,
 830                                    WM8955_VROI, 0);
 831
 832                /* Turn off VMID and VREF */
 833                snd_soc_update_bits(codec, WM8955_POWER_MANAGEMENT_1,
 834                                    WM8955_VREF |
 835                                    WM8955_VMIDSEL_MASK, 0);
 836
 837                regulator_bulk_disable(ARRAY_SIZE(wm8955->supplies),
 838                                       wm8955->supplies);
 839                break;
 840        }
 841        return 0;
 842}
 843
 844#define WM8955_RATES SNDRV_PCM_RATE_8000_96000
 845
 846#define WM8955_FORMATS (SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S20_3LE |\
 847                        SNDRV_PCM_FMTBIT_S24_LE | SNDRV_PCM_FMTBIT_S32_LE)
 848
 849static const struct snd_soc_dai_ops wm8955_dai_ops = {
 850        .set_sysclk = wm8955_set_sysclk,
 851        .set_fmt = wm8955_set_fmt,
 852        .hw_params = wm8955_hw_params,
 853        .digital_mute = wm8955_digital_mute,
 854};
 855
 856static struct snd_soc_dai_driver wm8955_dai = {
 857        .name = "wm8955-hifi",
 858        .playback = {
 859                .stream_name = "Playback",
 860                .channels_min = 2,
 861                .channels_max = 2,
 862                .rates = WM8955_RATES,
 863                .formats = WM8955_FORMATS,
 864        },
 865        .ops = &wm8955_dai_ops,
 866};
 867
 868static int wm8955_probe(struct snd_soc_codec *codec)
 869{
 870        struct wm8955_priv *wm8955 = snd_soc_codec_get_drvdata(codec);
 871        struct wm8955_pdata *pdata = dev_get_platdata(codec->dev);
 872        int ret, i;
 873
 874        for (i = 0; i < ARRAY_SIZE(wm8955->supplies); i++)
 875                wm8955->supplies[i].supply = wm8955_supply_names[i];
 876
 877        ret = devm_regulator_bulk_get(codec->dev, ARRAY_SIZE(wm8955->supplies),
 878                                 wm8955->supplies);
 879        if (ret != 0) {
 880                dev_err(codec->dev, "Failed to request supplies: %d\n", ret);
 881                return ret;
 882        }
 883
 884        ret = regulator_bulk_enable(ARRAY_SIZE(wm8955->supplies),
 885                                    wm8955->supplies);
 886        if (ret != 0) {
 887                dev_err(codec->dev, "Failed to enable supplies: %d\n", ret);
 888                return ret;
 889        }
 890
 891        ret = wm8955_reset(codec);
 892        if (ret < 0) {
 893                dev_err(codec->dev, "Failed to issue reset: %d\n", ret);
 894                goto err_enable;
 895        }
 896
 897        /* Change some default settings - latch VU and enable ZC */
 898        snd_soc_update_bits(codec, WM8955_LEFT_DAC_VOLUME,
 899                            WM8955_LDVU, WM8955_LDVU);
 900        snd_soc_update_bits(codec, WM8955_RIGHT_DAC_VOLUME,
 901                            WM8955_RDVU, WM8955_RDVU);
 902        snd_soc_update_bits(codec, WM8955_LOUT1_VOLUME,
 903                            WM8955_LO1VU | WM8955_LO1ZC,
 904                            WM8955_LO1VU | WM8955_LO1ZC);
 905        snd_soc_update_bits(codec, WM8955_ROUT1_VOLUME,
 906                            WM8955_RO1VU | WM8955_RO1ZC,
 907                            WM8955_RO1VU | WM8955_RO1ZC);
 908        snd_soc_update_bits(codec, WM8955_LOUT2_VOLUME,
 909                            WM8955_LO2VU | WM8955_LO2ZC,
 910                            WM8955_LO2VU | WM8955_LO2ZC);
 911        snd_soc_update_bits(codec, WM8955_ROUT2_VOLUME,
 912                            WM8955_RO2VU | WM8955_RO2ZC,
 913                            WM8955_RO2VU | WM8955_RO2ZC);
 914        snd_soc_update_bits(codec, WM8955_MONOOUT_VOLUME,
 915                            WM8955_MOZC, WM8955_MOZC);
 916
 917        /* Also enable adaptive bass boost by default */
 918        snd_soc_update_bits(codec, WM8955_BASS_CONTROL, WM8955_BB, WM8955_BB);
 919
 920        /* Set platform data values */
 921        if (pdata) {
 922                if (pdata->out2_speaker)
 923                        snd_soc_update_bits(codec, WM8955_ADDITIONAL_CONTROL_2,
 924                                            WM8955_ROUT2INV, WM8955_ROUT2INV);
 925
 926                if (pdata->monoin_diff)
 927                        snd_soc_update_bits(codec, WM8955_MONO_OUT_MIX_1,
 928                                            WM8955_DMEN, WM8955_DMEN);
 929        }
 930
 931        snd_soc_codec_force_bias_level(codec, SND_SOC_BIAS_STANDBY);
 932
 933        /* Bias level configuration will have done an extra enable */
 934        regulator_bulk_disable(ARRAY_SIZE(wm8955->supplies), wm8955->supplies);
 935
 936        return 0;
 937
 938err_enable:
 939        regulator_bulk_disable(ARRAY_SIZE(wm8955->supplies), wm8955->supplies);
 940        return ret;
 941}
 942
 943static struct snd_soc_codec_driver soc_codec_dev_wm8955 = {
 944        .probe =        wm8955_probe,
 945        .set_bias_level = wm8955_set_bias_level,
 946        .suspend_bias_off = true,
 947
 948        .controls =     wm8955_snd_controls,
 949        .num_controls = ARRAY_SIZE(wm8955_snd_controls),
 950        .dapm_widgets = wm8955_dapm_widgets,
 951        .num_dapm_widgets = ARRAY_SIZE(wm8955_dapm_widgets),
 952        .dapm_routes =  wm8955_dapm_routes,
 953        .num_dapm_routes = ARRAY_SIZE(wm8955_dapm_routes),
 954};
 955
 956static const struct regmap_config wm8955_regmap = {
 957        .reg_bits = 7,
 958        .val_bits = 9,
 959
 960        .max_register = WM8955_MAX_REGISTER,
 961        .volatile_reg = wm8955_volatile,
 962        .writeable_reg = wm8955_writeable,
 963
 964        .cache_type = REGCACHE_RBTREE,
 965        .reg_defaults = wm8955_reg_defaults,
 966        .num_reg_defaults = ARRAY_SIZE(wm8955_reg_defaults),
 967};
 968
 969static int wm8955_i2c_probe(struct i2c_client *i2c,
 970                            const struct i2c_device_id *id)
 971{
 972        struct wm8955_priv *wm8955;
 973        int ret;
 974
 975        wm8955 = devm_kzalloc(&i2c->dev, sizeof(struct wm8955_priv),
 976                              GFP_KERNEL);
 977        if (wm8955 == NULL)
 978                return -ENOMEM;
 979
 980        wm8955->regmap = devm_regmap_init_i2c(i2c, &wm8955_regmap);
 981        if (IS_ERR(wm8955->regmap)) {
 982                ret = PTR_ERR(wm8955->regmap);
 983                dev_err(&i2c->dev, "Failed to allocate register map: %d\n",
 984                        ret);
 985                return ret;
 986        }
 987
 988        i2c_set_clientdata(i2c, wm8955);
 989
 990        ret = snd_soc_register_codec(&i2c->dev,
 991                        &soc_codec_dev_wm8955, &wm8955_dai, 1);
 992
 993        return ret;
 994}
 995
 996static int wm8955_i2c_remove(struct i2c_client *client)
 997{
 998        snd_soc_unregister_codec(&client->dev);
 999
1000        return 0;
1001}
1002
1003static const struct i2c_device_id wm8955_i2c_id[] = {
1004        { "wm8955", 0 },
1005        { }
1006};
1007MODULE_DEVICE_TABLE(i2c, wm8955_i2c_id);
1008
1009static struct i2c_driver wm8955_i2c_driver = {
1010        .driver = {
1011                .name = "wm8955",
1012        },
1013        .probe =    wm8955_i2c_probe,
1014        .remove =   wm8955_i2c_remove,
1015        .id_table = wm8955_i2c_id,
1016};
1017
1018module_i2c_driver(wm8955_i2c_driver);
1019
1020MODULE_DESCRIPTION("ASoC WM8955 driver");
1021MODULE_AUTHOR("Mark Brown <broonie@opensource.wolfsonmicro.com>");
1022MODULE_LICENSE("GPL");
1023