/*
 *  skl-topology.c - Implements Platform component ALSA controls/widget
 *  handlers.
 *
 *  Copyright (C) 2014-2015 Intel Corp
 *  Author: Jeeja KP <jeeja.kp@intel.com>
 *  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as version 2, as
 * published by the Free Software Foundation.
 *
 * This program is distributed in the hope that it will be useful, but
 * WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
 * General Public License for more details.
 */

#include <linux/slab.h>
#include <linux/types.h>
#include <linux/firmware.h>
#include <sound/soc.h>
#include <sound/soc-topology.h>
#include "skl-sst-dsp.h"
#include "skl-sst-ipc.h"
#include "skl-topology.h"
#include "skl.h"
#include "skl-tplg-interface.h"
#include "../common/sst-dsp.h"
#include "../common/sst-dsp-priv.h"

#define SKL_CH_FIXUP_MASK               (1 << 0)
#define SKL_RATE_FIXUP_MASK             (1 << 1)
#define SKL_FMT_FIXUP_MASK              (1 << 2)

/*
 * SKL DSP driver modelling uses only few DAPM widgets so for rest we will
 * ignore. This helpers checks if the SKL driver handles this widget type
 */
static int is_skl_dsp_widget_type(struct snd_soc_dapm_widget *w)
{
        switch (w->id) {
        case snd_soc_dapm_dai_link:
        case snd_soc_dapm_dai_in:
        case snd_soc_dapm_aif_in:
        case snd_soc_dapm_aif_out:
        case snd_soc_dapm_dai_out:
        case snd_soc_dapm_switch:
                return false;
        default:
                return true;
        }
}

/*
 * Each pipelines needs memory to be allocated. Check if we have free memory
 * from available pool.
 */
static bool skl_is_pipe_mem_avail(struct skl *skl,
                                struct skl_module_cfg *mconfig)
{
        struct skl_sst *ctx = skl->skl_sst;

        if (skl->resource.mem + mconfig->pipe->memory_pages >
                                skl->resource.max_mem) {
                dev_err(ctx->dev,
                                "%s: module_id %d instance %d\n", __func__,
                                mconfig->id.module_id,
                                mconfig->id.instance_id);
                dev_err(ctx->dev,
                                "exceeds ppl memory available %d mem %d\n",
                                skl->resource.max_mem, skl->resource.mem);
                return false;
        } else {
                return true;
        }
}

/*
 * Add the mem to the mem pool. This is freed when pipe is deleted.
 * Note: DSP does actual memory management we only keep track for complete
 * pool
 */
static void skl_tplg_alloc_pipe_mem(struct skl *skl,
                                struct skl_module_cfg *mconfig)
{
        skl->resource.mem += mconfig->pipe->memory_pages;
}

/*
 * Pipeline needs needs DSP CPU resources for computation, this is
 * quantified in MCPS (Million Clocks Per Second) required for module/pipe
 *
 * Each pipelines needs mcps to be allocated. Check if we have mcps for this
 * pipe.
 */

static bool skl_is_pipe_mcps_avail(struct skl *skl,
                                struct skl_module_cfg *mconfig)
{
        struct skl_sst *ctx = skl->skl_sst;

        if (skl->resource.mcps + mconfig->mcps > skl->resource.max_mcps) {
                dev_err(ctx->dev,
                        "%s: module_id %d instance %d\n", __func__,
                        mconfig->id.module_id, mconfig->id.instance_id);
                dev_err(ctx->dev,
                        "exceeds ppl mcps available %d > mem %d\n",
                        skl->resource.max_mcps, skl->resource.mcps);
                return false;
        } else {
                return true;
        }
}

static void skl_tplg_alloc_pipe_mcps(struct skl *skl,
                                struct skl_module_cfg *mconfig)
{
        skl->resource.mcps += mconfig->mcps;
}

/*
 * Free the mcps when tearing down
 */
static void
skl_tplg_free_pipe_mcps(struct skl *skl, struct skl_module_cfg *mconfig)
{
        skl->resource.mcps -= mconfig->mcps;
}

/*
 * Free the memory when tearing down
 */
static void
skl_tplg_free_pipe_mem(struct skl *skl, struct skl_module_cfg *mconfig)
{
        skl->resource.mem -= mconfig->pipe->memory_pages;
}


static void skl_dump_mconfig(struct skl_sst *ctx,
                                        struct skl_module_cfg *mcfg)
{
        dev_dbg(ctx->dev, "Dumping config\n");
        dev_dbg(ctx->dev, "Input Format:\n");
        dev_dbg(ctx->dev, "channels = %d\n", mcfg->in_fmt[0].channels);
        dev_dbg(ctx->dev, "s_freq = %d\n", mcfg->in_fmt[0].s_freq);
        dev_dbg(ctx->dev, "ch_cfg = %d\n", mcfg->in_fmt[0].ch_cfg);
        dev_dbg(ctx->dev, "valid bit depth = %d\n", mcfg->in_fmt[0].valid_bit_depth);
        dev_dbg(ctx->dev, "Output Format:\n");
        dev_dbg(ctx->dev, "channels = %d\n", mcfg->out_fmt[0].channels);
        dev_dbg(ctx->dev, "s_freq = %d\n", mcfg->out_fmt[0].s_freq);
        dev_dbg(ctx->dev, "valid bit depth = %d\n", mcfg->out_fmt[0].valid_bit_depth);
        dev_dbg(ctx->dev, "ch_cfg = %d\n", mcfg->out_fmt[0].ch_cfg);
}

static void skl_tplg_update_params(struct skl_module_fmt *fmt,
                        struct skl_pipe_params *params, int fixup)
{
        if (fixup & SKL_RATE_FIXUP_MASK)
                fmt->s_freq = params->s_freq;
        if (fixup & SKL_CH_FIXUP_MASK)
                fmt->channels = params->ch;
        if (fixup & SKL_FMT_FIXUP_MASK) {
                fmt->valid_bit_depth = skl_get_bit_depth(params->s_fmt);

                /*
                 * 16 bit is 16 bit container whereas 24 bit is in 32 bit
                 * container so update bit depth accordingly
                 */
                switch (fmt->valid_bit_depth) {
                case SKL_DEPTH_16BIT:
                        fmt->bit_depth = fmt->valid_bit_depth;
                        break;

                default:
                        fmt->bit_depth = SKL_DEPTH_32BIT;
                        break;
                }
        }

}

/*
 * A pipeline may have modules which impact the pcm parameters, like SRC,
 * channel converter, format converter.
 * We need to calculate the output params by applying the 'fixup'
 * Topology will tell driver which type of fixup is to be applied by
 * supplying the fixup mask, so based on that we calculate the output
 *
 * Now In FE the pcm hw_params is source/target format. Same is applicable
 * for BE with its hw_params invoked.
 * here based on FE, BE pipeline and direction we calculate the input and
 * outfix and then apply that for a module
 */
static void skl_tplg_update_params_fixup(struct skl_module_cfg *m_cfg,
                struct skl_pipe_params *params, bool is_fe)
{
        int in_fixup, out_fixup;
        struct skl_module_fmt *in_fmt, *out_fmt;

        /* Fixups will be applied to pin 0 only */
        in_fmt = &m_cfg->in_fmt[0];
        out_fmt = &m_cfg->out_fmt[0];

        if (params->stream == SNDRV_PCM_STREAM_PLAYBACK) {
                if (is_fe) {
                        in_fixup = m_cfg->params_fixup;
                        out_fixup = (~m_cfg->converter) &
                                        m_cfg->params_fixup;
                } else {
                        out_fixup = m_cfg->params_fixup;
                        in_fixup = (~m_cfg->converter) &
                                        m_cfg->params_fixup;
                }
        } else {
                if (is_fe) {
                        out_fixup = m_cfg->params_fixup;
                        in_fixup = (~m_cfg->converter) &
                                        m_cfg->params_fixup;
                } else {
                        in_fixup = m_cfg->params_fixup;
                        out_fixup = (~m_cfg->converter) &
                                        m_cfg->params_fixup;
                }
        }

        skl_tplg_update_params(in_fmt, params, in_fixup);
        skl_tplg_update_params(out_fmt, params, out_fixup);
}

/*
 * A module needs input and output buffers, which are dependent upon pcm
 * params, so once we have calculate params, we need buffer calculation as
 * well.
 */
static void skl_tplg_update_buffer_size(struct skl_sst *ctx,
                                struct skl_module_cfg *mcfg)
{
        int multiplier = 1;
        struct skl_module_fmt *in_fmt, *out_fmt;
        int in_rate, out_rate;


        /* Since fixups is applied to pin 0 only, ibs, obs needs
         * change for pin 0 only
         */
        in_fmt = &mcfg->in_fmt[0];
        out_fmt = &mcfg->out_fmt[0];

        if (mcfg->m_type == SKL_MODULE_TYPE_SRCINT)
                multiplier = 5;

        if (in_fmt->s_freq % 1000)
                in_rate = (in_fmt->s_freq / 1000) + 1;
        else
                in_rate = (in_fmt->s_freq / 1000);

        mcfg->ibs = in_rate * (mcfg->in_fmt->channels) *
                        (mcfg->in_fmt->bit_depth >> 3) *
                        multiplier;

        if (mcfg->out_fmt->s_freq % 1000)
                out_rate = (mcfg->out_fmt->s_freq / 1000) + 1;
        else
                out_rate = (mcfg->out_fmt->s_freq / 1000);

        mcfg->obs = out_rate * (mcfg->out_fmt->channels) *
                        (mcfg->out_fmt->bit_depth >> 3) *
                        multiplier;
}

static int skl_tplg_update_be_blob(struct snd_soc_dapm_widget *w,
                                                struct skl_sst *ctx)
{
        struct skl_module_cfg *m_cfg = w->priv;
        int link_type, dir;
        u32 ch, s_freq, s_fmt;
        struct nhlt_specific_cfg *cfg;
        struct skl *skl = get_skl_ctx(ctx->dev);

        /* check if we already have blob */
        if (m_cfg->formats_config.caps_size > 0)
                return 0;

        dev_dbg(ctx->dev, "Applying default cfg blob\n");
        switch (m_cfg->dev_type) {
        case SKL_DEVICE_DMIC:
                link_type = NHLT_LINK_DMIC;
                dir = SNDRV_PCM_STREAM_CAPTURE;
                s_freq = m_cfg->in_fmt[0].s_freq;
                s_fmt = m_cfg->in_fmt[0].bit_depth;
                ch = m_cfg->in_fmt[0].channels;
                break;

        case SKL_DEVICE_I2S:
                link_type = NHLT_LINK_SSP;
                if (m_cfg->hw_conn_type == SKL_CONN_SOURCE) {
                        dir = SNDRV_PCM_STREAM_PLAYBACK;
                        s_freq = m_cfg->out_fmt[0].s_freq;
                        s_fmt = m_cfg->out_fmt[0].bit_depth;
                        ch = m_cfg->out_fmt[0].channels;
                } else {
                        dir = SNDRV_PCM_STREAM_CAPTURE;
                        s_freq = m_cfg->in_fmt[0].s_freq;
                        s_fmt = m_cfg->in_fmt[0].bit_depth;
                        ch = m_cfg->in_fmt[0].channels;
                }
                break;

        default:
                return -EINVAL;
        }

        /* update the blob based on virtual bus_id and default params */
        cfg = skl_get_ep_blob(skl, m_cfg->vbus_id, link_type,
                                        s_fmt, ch, s_freq, dir);
        if (cfg) {
                m_cfg->formats_config.caps_size = cfg->size;
                m_cfg->formats_config.caps = (u32 *) &cfg->caps;
        } else {
                dev_err(ctx->dev, "Blob NULL for id %x type %d dirn %d\n",
                                        m_cfg->vbus_id, link_type, dir);
                dev_err(ctx->dev, "PCM: ch %d, freq %d, fmt %d\n",
                                        ch, s_freq, s_fmt);
                return -EIO;
        }

        return 0;
}

static void skl_tplg_update_module_params(struct snd_soc_dapm_widget *w,
                                                        struct skl_sst *ctx)
{
        struct skl_module_cfg *m_cfg = w->priv;
        struct skl_pipe_params *params = m_cfg->pipe->p_params;
        int p_conn_type = m_cfg->pipe->conn_type;
        bool is_fe;

        if (!m_cfg->params_fixup)
                return;

        dev_dbg(ctx->dev, "Mconfig for widget=%s BEFORE updation\n",
                                w->name);

        skl_dump_mconfig(ctx, m_cfg);

        if (p_conn_type == SKL_PIPE_CONN_TYPE_FE)
                is_fe = true;
        else
                is_fe = false;

        skl_tplg_update_params_fixup(m_cfg, params, is_fe);
        skl_tplg_update_buffer_size(ctx, m_cfg);

        dev_dbg(ctx->dev, "Mconfig for widget=%s AFTER updation\n",
                                w->name);

        skl_dump_mconfig(ctx, m_cfg);
}

/*
 * A pipe can have multiple modules, each of them will be a DAPM widget as
 * well. While managing a pipeline we need to get the list of all the
 * widgets in a pipelines, so this helper - skl_tplg_get_pipe_widget() helps
 * to get the SKL type widgets in that pipeline
 */
static int skl_tplg_alloc_pipe_widget(struct device *dev,
        struct snd_soc_dapm_widget *w, struct skl_pipe *pipe)
{
        struct skl_module_cfg *src_module = NULL;
        struct snd_soc_dapm_path *p = NULL;
        struct skl_pipe_module *p_module = NULL;

        p_module = devm_kzalloc(dev, sizeof(*p_module), GFP_KERNEL);
        if (!p_module)
                return -ENOMEM;

        p_module->w = w;
        list_add_tail(&p_module->node, &pipe->w_list);

        snd_soc_dapm_widget_for_each_sink_path(w, p) {
                if ((p->sink->priv == NULL)
                                && (!is_skl_dsp_widget_type(w)))
                        continue;

                if ((p->sink->priv != NULL) && p->connect
                                && is_skl_dsp_widget_type(p->sink)) {

                        src_module = p->sink->priv;
                        if (pipe->ppl_id == src_module->pipe->ppl_id)
                                skl_tplg_alloc_pipe_widget(dev,
                                                        p->sink, pipe);
                }
        }
        return 0;
}

/*
 * some modules can have multiple params set from user control and
 * need to be set after module is initialized. If set_param flag is
 * set module params will be done after module is initialised.
 */
static int skl_tplg_set_module_params(struct snd_soc_dapm_widget *w,
                                                struct skl_sst *ctx)
{
        int i, ret;
        struct skl_module_cfg *mconfig = w->priv;
        const struct snd_kcontrol_new *k;
        struct soc_bytes_ext *sb;
        struct skl_algo_data *bc;
        struct skl_specific_cfg *sp_cfg;

        if (mconfig->formats_config.caps_size > 0 &&
                mconfig->formats_config.set_params == SKL_PARAM_SET) {
                sp_cfg = &mconfig->formats_config;
                ret = skl_set_module_params(ctx, sp_cfg->caps,
                                        sp_cfg->caps_size,
                                        sp_cfg->param_id, mconfig);
                if (ret < 0)
                        return ret;
        }

        for (i = 0; i < w->num_kcontrols; i++) {
                k = &w->kcontrol_news[i];
                if (k->access & SNDRV_CTL_ELEM_ACCESS_TLV_CALLBACK) {
                        sb = (void *) k->private_value;
                        bc = (struct skl_algo_data *)sb->dobj.private;

                        if (bc->set_params == SKL_PARAM_SET) {
                                ret = skl_set_module_params(ctx,
                                                (u32 *)bc->params, bc->max,
                                                bc->param_id, mconfig);
                                if (ret < 0)
                                        return ret;
                        }
                }
        }

        return 0;
}

/*
 * some module param can set from user control and this is required as
 * when module is initailzed. if module param is required in init it is
 * identifed by set_param flag. if set_param flag is not set, then this
 * parameter needs to set as part of module init.
 */
static int skl_tplg_set_module_init_data(struct snd_soc_dapm_widget *w)
{
        const struct snd_kcontrol_new *k;
        struct soc_bytes_ext *sb;
        struct skl_algo_data *bc;
        struct skl_module_cfg *mconfig = w->priv;
        int i;

        for (i = 0; i < w->num_kcontrols; i++) {
                k = &w->kcontrol_news[i];
                if (k->access & SNDRV_CTL_ELEM_ACCESS_TLV_CALLBACK) {
                        sb = (struct soc_bytes_ext *)k->private_value;
                        bc = (struct skl_algo_data *)sb->dobj.private;

                        if (bc->set_params != SKL_PARAM_INIT)
                                continue;

                        mconfig->formats_config.caps = (u32 *)&bc->params;
                        mconfig->formats_config.caps_size = bc->max;

                        break;
                }
        }

        return 0;
}

/*
 * Inside a pipe instance, we can have various modules. These modules need
 * to instantiated in DSP by invoking INIT_MODULE IPC, which is achieved by
 * skl_init_module() routine, so invoke that for all modules in a pipeline
 */
static int
skl_tplg_init_pipe_modules(struct skl *skl, struct skl_pipe *pipe)
{
        struct skl_pipe_module *w_module;
        struct snd_soc_dapm_widget *w;
        struct skl_module_cfg *mconfig;
        struct skl_sst *ctx = skl->skl_sst;
        int ret = 0;

        list_for_each_entry(w_module, &pipe->w_list, node) {
                w = w_module->w;
                mconfig = w->priv;

                /* check resource available */
                if (!skl_is_pipe_mcps_avail(skl, mconfig))
                        return -ENOMEM;

                skl_tplg_alloc_pipe_mcps(skl, mconfig);

                if (mconfig->is_loadable && ctx->dsp->fw_ops.load_mod) {
                        ret = ctx->dsp->fw_ops.load_mod(ctx->dsp,
                                mconfig->id.module_id, mconfig->guid);
                        if (ret < 0)
                                return ret;

                        mconfig->m_state = SKL_MODULE_LOADED;
                }

                /* update blob if blob is null for be with default value */
                skl_tplg_update_be_blob(w, ctx);

                /*
                 * apply fix/conversion to module params based on
                 * FE/BE params
                 */
                skl_tplg_update_module_params(w, ctx);

                skl_tplg_set_module_init_data(w);
                ret = skl_init_module(ctx, mconfig);
                if (ret < 0)
                        return ret;

                ret = skl_tplg_set_module_params(w, ctx);
                if (ret < 0)
                        return ret;
        }

        return 0;
}

static int skl_tplg_unload_pipe_modules(struct skl_sst *ctx,
         struct skl_pipe *pipe)
{
        struct skl_pipe_module *w_module = NULL;
        struct skl_module_cfg *mconfig = NULL;

        list_for_each_entry(w_module, &pipe->w_list, node) {
                mconfig  = w_module->w->priv;

                if (mconfig->is_loadable && ctx->dsp->fw_ops.unload_mod &&
                        mconfig->m_state > SKL_MODULE_UNINIT)
                        return ctx->dsp->fw_ops.unload_mod(ctx->dsp,
                                                mconfig->id.module_id);
        }

        /* no modules to unload in this path, so return */
        return 0;
}

/*
 * Mixer module represents a pipeline. So in the Pre-PMU event of mixer we
 * need create the pipeline. So we do following:
 *   - check the resources
 *   - Create the pipeline
 *   - Initialize the modules in pipeline
 *   - finally bind all modules together
 */
static int skl_tplg_mixer_dapm_pre_pmu_event(struct snd_soc_dapm_widget *w,
                                                        struct skl *skl)
{
        int ret;
        struct skl_module_cfg *mconfig = w->priv;
        struct skl_pipe_module *w_module;
        struct skl_pipe *s_pipe = mconfig->pipe;
        struct skl_module_cfg *src_module = NULL, *dst_module;
        struct skl_sst *ctx = skl->skl_sst;

        /* check resource available */
        if (!skl_is_pipe_mcps_avail(skl, mconfig))
                return -EBUSY;

        if (!skl_is_pipe_mem_avail(skl, mconfig))
                return -ENOMEM;

        skl_tplg_alloc_pipe_mem(skl, mconfig);
        skl_tplg_alloc_pipe_mcps(skl, mconfig);

        /*
         * Create a list of modules for pipe.
         * This list contains modules from source to sink
         */
        ret = skl_create_pipeline(ctx, mconfig->pipe);
        if (ret < 0)
                return ret;

        /*
         * we create a w_list of all widgets in that pipe. This list is not
         * freed on PMD event as widgets within a pipe are static. This
         * saves us cycles to get widgets in pipe every time.
         *
         * So if we have already initialized all the widgets of a pipeline
         * we skip, so check for list_empty and create the list if empty
         */
        if (list_empty(&s_pipe->w_list)) {
                ret = skl_tplg_alloc_pipe_widget(ctx->dev, w, s_pipe);
                if (ret < 0)
                        return ret;
        }

        /* Init all pipe modules from source to sink */
        ret = skl_tplg_init_pipe_modules(skl, s_pipe);
        if (ret < 0)
                return ret;

        /* Bind modules from source to sink */
        list_for_each_entry(w_module, &s_pipe->w_list, node) {
                dst_module = w_module->w->priv;

                if (src_module == NULL) {
                        src_module = dst_module;
                        continue;
                }

                ret = skl_bind_modules(ctx, src_module, dst_module);
                if (ret < 0)
                        return ret;

                src_module = dst_module;
        }

        return 0;
}

/*
 * Some modules require params to be set after the module is bound to
 * all pins connected.
 *
 * The module provider initializes set_param flag for such modules and we
 * send params after binding
 */
static int skl_tplg_set_module_bind_params(struct snd_soc_dapm_widget *w,
                        struct skl_module_cfg *mcfg, struct skl_sst *ctx)
{
        int i, ret;
        struct skl_module_cfg *mconfig = w->priv;
        const struct snd_kcontrol_new *k;
        struct soc_bytes_ext *sb;
        struct skl_algo_data *bc;
        struct skl_specific_cfg *sp_cfg;

        /*
         * check all out/in pins are in bind state.
         * if so set the module param
         */
        for (i = 0; i < mcfg->max_out_queue; i++) {
                if (mcfg->m_out_pin[i].pin_state != SKL_PIN_BIND_DONE)
                        return 0;
        }

        for (i = 0; i < mcfg->max_in_queue; i++) {
                if (mcfg->m_in_pin[i].pin_state != SKL_PIN_BIND_DONE)
                        return 0;
        }

        if (mconfig->formats_config.caps_size > 0 &&
                mconfig->formats_config.set_params == SKL_PARAM_BIND) {
                sp_cfg = &mconfig->formats_config;
                ret = skl_set_module_params(ctx, sp_cfg->caps,
                                        sp_cfg->caps_size,
                                        sp_cfg->param_id, mconfig);
                if (ret < 0)
                        return ret;
        }

        for (i = 0; i < w->num_kcontrols; i++) {
                k = &w->kcontrol_news[i];
                if (k->access & SNDRV_CTL_ELEM_ACCESS_TLV_CALLBACK) {
                        sb = (void *) k->private_value;
                        bc = (struct skl_algo_data *)sb->dobj.private;

                        if (bc->set_params == SKL_PARAM_BIND) {
                                ret = skl_set_module_params(ctx,
                                                (u32 *)bc->params, bc->max,
                                                bc->param_id, mconfig);
                                if (ret < 0)
                                        return ret;
                        }
                }
        }

        return 0;
}

static int skl_tplg_bind_sinks(struct snd_soc_dapm_widget *w,
                                struct skl *skl,
                                struct snd_soc_dapm_widget *src_w,
                                struct skl_module_cfg *src_mconfig)
{
        struct snd_soc_dapm_path *p;
        struct snd_soc_dapm_widget *sink = NULL, *next_sink = NULL;
        struct skl_module_cfg *sink_mconfig;
        struct skl_sst *ctx = skl->skl_sst;
        int ret;

        snd_soc_dapm_widget_for_each_sink_path(w, p) {
                if (!p->connect)
                        continue;

                dev_dbg(ctx->dev, "%s: src widget=%s\n", __func__, w->name);
                dev_dbg(ctx->dev, "%s: sink widget=%s\n", __func__, p->sink->name);

                next_sink = p->sink;

                if (!is_skl_dsp_widget_type(p->sink))
                        return skl_tplg_bind_sinks(p->sink, skl, src_w, src_mconfig);

                /*
                 * here we will check widgets in sink pipelines, so that
                 * can be any widgets type and we are only interested if
                 * they are ones used for SKL so check that first
                 */
                if ((p->sink->priv != NULL) &&
                                        is_skl_dsp_widget_type(p->sink)) {

                        sink = p->sink;
                        sink_mconfig = sink->priv;

                        if (src_mconfig->m_state == SKL_MODULE_UNINIT ||
                                sink_mconfig->m_state == SKL_MODULE_UNINIT)
                                continue;

                        /* Bind source to sink, mixin is always source */
                        ret = skl_bind_modules(ctx, src_mconfig, sink_mconfig);
                        if (ret)
                                return ret;

                        /* set module params after bind */
                        skl_tplg_set_module_bind_params(src_w, src_mconfig, ctx);
                        skl_tplg_set_module_bind_params(sink, sink_mconfig, ctx);

                        /* Start sinks pipe first */
                        if (sink_mconfig->pipe->state != SKL_PIPE_STARTED) {
                                if (sink_mconfig->pipe->conn_type !=
                                                        SKL_PIPE_CONN_TYPE_FE)
                                        ret = skl_run_pipe(ctx,
                                                        sink_mconfig->pipe);
                                if (ret)
                                        return ret;
                        }
                }
        }

        if (!sink)
                return skl_tplg_bind_sinks(next_sink, skl, src_w, src_mconfig);

        return 0;
}

/*
 * A PGA represents a module in a pipeline. So in the Pre-PMU event of PGA
 * we need to do following:
 *   - Bind to sink pipeline
 *      Since the sink pipes can be running and we don't get mixer event on
 *      connect for already running mixer, we need to find the sink pipes
 *      here and bind to them. This way dynamic connect works.
 *   - Start sink pipeline, if not running
 *   - Then run current pipe
 */
static int skl_tplg_pga_dapm_pre_pmu_event(struct snd_soc_dapm_widget *w,
                                                                struct skl *skl)
{
        struct skl_module_cfg *src_mconfig;
        struct skl_sst *ctx = skl->skl_sst;
        int ret = 0;

        src_mconfig = w->priv;

        /*
         * find which sink it is connected to, bind with the sink,
         * if sink is not started, start sink pipe first, then start
         * this pipe
         */
        ret = skl_tplg_bind_sinks(w, skl, w, src_mconfig);
        if (ret)
                return ret;

        /* Start source pipe last after starting all sinks */
        if (src_mconfig->pipe->conn_type != SKL_PIPE_CONN_TYPE_FE)
                return skl_run_pipe(ctx, src_mconfig->pipe);

        return 0;
}

static struct snd_soc_dapm_widget *skl_get_src_dsp_widget(
                struct snd_soc_dapm_widget *w, struct skl *skl)
{
        struct snd_soc_dapm_path *p;
        struct snd_soc_dapm_widget *src_w = NULL;
        struct skl_sst *ctx = skl->skl_sst;

        snd_soc_dapm_widget_for_each_source_path(w, p) {
                src_w = p->source;
                if (!p->connect)
                        continue;

                dev_dbg(ctx->dev, "sink widget=%s\n", w->name);
                dev_dbg(ctx->dev, "src widget=%s\n", p->source->name);

                /*
                 * here we will check widgets in sink pipelines, so that can
                 * be any widgets type and we are only interested if they are
                 * ones used for SKL so check that first
                 */
                if ((p->source->priv != NULL) &&
                                        is_skl_dsp_widget_type(p->source)) {
                        return p->source;
                }
        }

        if (src_w != NULL)
                return skl_get_src_dsp_widget(src_w, skl);

        return NULL;
}

/*
 * in the Post-PMU event of mixer we need to do following:
 *   - Check if this pipe is running
 *   - if not, then
 *      - bind this pipeline to its source pipeline
 *        if source pipe is already running, this means it is a dynamic
 *        connection and we need to bind only to that pipe
 *      - start this pipeline
 */
static int skl_tplg_mixer_dapm_post_pmu_event(struct snd_soc_dapm_widget *w,
                                                        struct skl *skl)
{
        int ret = 0;
        struct snd_soc_dapm_widget *source, *sink;
        struct skl_module_cfg *src_mconfig, *sink_mconfig;
        struct skl_sst *ctx = skl->skl_sst;
        int src_pipe_started = 0;

        sink = w;
        sink_mconfig = sink->priv;

        /*
         * If source pipe is already started, that means source is driving
         * one more sink before this sink got connected, Since source is
         * started, bind this sink to source and start this pipe.
         */
        source = skl_get_src_dsp_widget(w, skl);
        if (source != NULL) {
                src_mconfig = source->priv;
                sink_mconfig = sink->priv;
                src_pipe_started = 1;

                /*
                 * check pipe state, then no need to bind or start the
                 * pipe
                 */
                if (src_mconfig->pipe->state != SKL_PIPE_STARTED)
                        src_pipe_started = 0;
        }

        if (src_pipe_started) {
                ret = skl_bind_modules(ctx, src_mconfig, sink_mconfig);
                if (ret)
                        return ret;

                /* set module params after bind */
                skl_tplg_set_module_bind_params(source, src_mconfig, ctx);
                skl_tplg_set_module_bind_params(sink, sink_mconfig, ctx);

                if (sink_mconfig->pipe->conn_type != SKL_PIPE_CONN_TYPE_FE)
                        ret = skl_run_pipe(ctx, sink_mconfig->pipe);
        }

        return ret;
}

/*
 * in the Pre-PMD event of mixer we need to do following:
 *   - Stop the pipe
 *   - find the source connections and remove that from dapm_path_list
 *   - unbind with source pipelines if still connected
 */
static int skl_tplg_mixer_dapm_pre_pmd_event(struct snd_soc_dapm_widget *w,
                                                        struct skl *skl)
{
        struct skl_module_cfg *src_mconfig, *sink_mconfig;
        int ret = 0, i;
        struct skl_sst *ctx = skl->skl_sst;

        sink_mconfig = w->priv;

        /* Stop the pipe */
        ret = skl_stop_pipe(ctx, sink_mconfig->pipe);
        if (ret)
                return ret;

        for (i = 0; i < sink_mconfig->max_in_queue; i++) {
                if (sink_mconfig->m_in_pin[i].pin_state == SKL_PIN_BIND_DONE) {
                        src_mconfig = sink_mconfig->m_in_pin[i].tgt_mcfg;
                        if (!src_mconfig)
                                continue;
                        /*
                         * If path_found == 1, that means pmd for source
                         * pipe has not occurred, source is connected to
                         * some other sink. so its responsibility of sink
                         * to unbind itself from source.
                         */
                        ret = skl_stop_pipe(ctx, src_mconfig->pipe);
                        if (ret < 0)
                                return ret;

                        ret = skl_unbind_modules(ctx,
                                                src_mconfig, sink_mconfig);
                }
        }

        return ret;
}

/*
 * in the Post-PMD event of mixer we need to do following:
 *   - Free the mcps used
 *   - Free the mem used
 *   - Unbind the modules within the pipeline
 *   - Delete the pipeline (modules are not required to be explicitly
 *     deleted, pipeline delete is enough here
 */
static int skl_tplg_mixer_dapm_post_pmd_event(struct snd_soc_dapm_widget *w,
                                                        struct skl *skl)
{
        struct skl_module_cfg *mconfig = w->priv;
        struct skl_pipe_module *w_module;
        struct skl_module_cfg *src_module = NULL, *dst_module;
        struct skl_sst *ctx = skl->skl_sst;
        struct skl_pipe *s_pipe = mconfig->pipe;
        int ret = 0;

        skl_tplg_free_pipe_mcps(skl, mconfig);
        skl_tplg_free_pipe_mem(skl, mconfig);

        list_for_each_entry(w_module, &s_pipe->w_list, node) {
                dst_module = w_module->w->priv;

                skl_tplg_free_pipe_mcps(skl, dst_module);
                if (src_module == NULL) {
                        src_module = dst_module;
                        continue;
                }

                skl_unbind_modules(ctx, src_module, dst_module);
                src_module = dst_module;
        }

        ret = skl_delete_pipe(ctx, mconfig->pipe);

        return skl_tplg_unload_pipe_modules(ctx, s_pipe);
}

/*
 * in the Post-PMD event of PGA we need to do following:
 *   - Free the mcps used
 *   - Stop the pipeline
 *   - In source pipe is connected, unbind with source pipelines
 */
static int skl_tplg_pga_dapm_post_pmd_event(struct snd_soc_dapm_widget *w,
                                                                struct skl *skl)
{
        struct skl_module_cfg *src_mconfig, *sink_mconfig;
        int ret = 0, i;
        struct skl_sst *ctx = skl->skl_sst;

        src_mconfig = w->priv;

        /* Stop the pipe since this is a mixin module */
        ret = skl_stop_pipe(ctx, src_mconfig->pipe);
        if (ret)
                return ret;

        for (i = 0; i < src_mconfig->max_out_queue; i++) {
                if (src_mconfig->m_out_pin[i].pin_state == SKL_PIN_BIND_DONE) {
                        sink_mconfig = src_mconfig->m_out_pin[i].tgt_mcfg;
                        if (!sink_mconfig)
                                continue;
                        /*
                         * This is a connecter and if path is found that means
                         * unbind between source and sink has not happened yet
                         */
                        ret = skl_unbind_modules(ctx, src_mconfig,
                                                        sink_mconfig);
                }
        }

        return ret;
}

/*
 * In modelling, we assume there will be ONLY one mixer in a pipeline.  If
 * mixer is not required then it is treated as static mixer aka vmixer with
 * a hard path to source module
 * So we don't need to check if source is started or not as hard path puts
 * dependency on each other
 */
static int skl_tplg_vmixer_event(struct snd_soc_dapm_widget *w,
                                struct snd_kcontrol *k, int event)
{

        struct snd_soc_dapm_context *dapm = w->dapm;
        struct skl *skl = get_skl_ctx(dapm->dev);

        switch (event) {
        case SND_SOC_DAPM_PRE_PMU:
                return skl_tplg_mixer_dapm_pre_pmu_event(w, skl);

        case SND_SOC_DAPM_POST_PMU:
                return skl_tplg_mixer_dapm_post_pmu_event(w, skl);

        case SND_SOC_DAPM_PRE_PMD:
                return skl_tplg_mixer_dapm_pre_pmd_event(w, skl);

        case SND_SOC_DAPM_POST_PMD:
                return skl_tplg_mixer_dapm_post_pmd_event(w, skl);
        }

        return 0;
}

/*
 * In modelling, we assume there will be ONLY one mixer in a pipeline. If a
 * second one is required that is created as another pipe entity.
 * The mixer is responsible for pipe management and represent a pipeline
 * instance
 */
static int skl_tplg_mixer_event(struct snd_soc_dapm_widget *w,
                                struct snd_kcontrol *k, int event)
{
        struct snd_soc_dapm_context *dapm = w->dapm;
        struct skl *skl = get_skl_ctx(dapm->dev);

        switch (event) {
        case SND_SOC_DAPM_PRE_PMU:
                return skl_tplg_mixer_dapm_pre_pmu_event(w, skl);

        case SND_SOC_DAPM_POST_PMU:
                return skl_tplg_mixer_dapm_post_pmu_event(w, skl);

        case SND_SOC_DAPM_PRE_PMD:
                return skl_tplg_mixer_dapm_pre_pmd_event(w, skl);

        case SND_SOC_DAPM_POST_PMD:
                return skl_tplg_mixer_dapm_post_pmd_event(w, skl);
        }

        return 0;
}

/*
 * In modelling, we assumed rest of the modules in pipeline are PGA. But we
 * are interested in last PGA (leaf PGA) in a pipeline to disconnect with
 * the sink when it is running (two FE to one BE or one FE to two BE)
 * scenarios
 */
static int skl_tplg_pga_event(struct snd_soc_dapm_widget *w,
                        struct snd_kcontrol *k, int event)

{
        struct snd_soc_dapm_context *dapm = w->dapm;
        struct skl *skl = get_skl_ctx(dapm->dev);

        switch (event) {
        case SND_SOC_DAPM_PRE_PMU:
                return skl_tplg_pga_dapm_pre_pmu_event(w, skl);

        case SND_SOC_DAPM_POST_PMD:
                return skl_tplg_pga_dapm_post_pmd_event(w, skl);
        }

        return 0;
}

static int skl_tplg_tlv_control_get(struct snd_kcontrol *kcontrol,
                        unsigned int __user *data, unsigned int size)
{
        struct soc_bytes_ext *sb =
                        (struct soc_bytes_ext *)kcontrol->private_value;
        struct skl_algo_data *bc = (struct skl_algo_data *)sb->dobj.private;
        struct snd_soc_dapm_widget *w = snd_soc_dapm_kcontrol_widget(kcontrol);
        struct skl_module_cfg *mconfig = w->priv;
        struct skl *skl = get_skl_ctx(w->dapm->dev);

        if (w->power)
                skl_get_module_params(skl->skl_sst, (u32 *)bc->params,
                                      bc->max, bc->param_id, mconfig);

        /* decrement size for TLV header */
        size -= 2 * sizeof(u32);

        /* check size as we don't want to send kernel data */
        if (size > bc->max)
                size = bc->max;

        if (bc->params) {
                if (copy_to_user(data, &bc->param_id, sizeof(u32)))
                        return -EFAULT;
                if (copy_to_user(data + 1, &size, sizeof(u32)))
                        return -EFAULT;
                if (copy_to_user(data + 2, bc->params, size))
                        return -EFAULT;
        }

        return 0;
}

#define SKL_PARAM_VENDOR_ID 0xff

static int skl_tplg_tlv_control_set(struct snd_kcontrol *kcontrol,
                        const unsigned int __user *data, unsigned int size)
{
        struct snd_soc_dapm_widget *w = snd_soc_dapm_kcontrol_widget(kcontrol);
        struct skl_module_cfg *mconfig = w->priv;
        struct soc_bytes_ext *sb =
                        (struct soc_bytes_ext *)kcontrol->private_value;
        struct skl_algo_data *ac = (struct skl_algo_data *)sb->dobj.private;
        struct skl *skl = get_skl_ctx(w->dapm->dev);

        if (ac->params) {
                /*
                 * if the param_is is of type Vendor, firmware expects actual
                 * parameter id and size from the control.
                 */
                if (ac->param_id == SKL_PARAM_VENDOR_ID) {
                        if (copy_from_user(ac->params, data, size))
                                return -EFAULT;
                } else {
                        if (copy_from_user(ac->params,
                                           data + 2, size))
                                return -EFAULT;
                }

                if (w->power)
                        return skl_set_module_params(skl->skl_sst,
                                                (u32 *)ac->params, ac->max,
                                                ac->param_id, mconfig);
        }

        return 0;
}

/*
 * The FE params are passed by hw_params of the DAI.
 * On hw_params, the params are stored in Gateway module of the FE and we
 * need to calculate the format in DSP module configuration, that
 * conversion is done here
 */
int skl_tplg_update_pipe_params(struct device *dev,
                        struct skl_module_cfg *mconfig,
                        struct skl_pipe_params *params)
{
        struct skl_pipe *pipe = mconfig->pipe;
        struct skl_module_fmt *format = NULL;

        memcpy(pipe->p_params, params, sizeof(*params));

        if (params->stream == SNDRV_PCM_STREAM_PLAYBACK)
                format = &mconfig->in_fmt[0];
        else
                format = &mconfig->out_fmt[0];

        /* set the hw_params */
        format->s_freq = params->s_freq;
        format->channels = params->ch;
        format->valid_bit_depth = skl_get_bit_depth(params->s_fmt);

        /*
         * 16 bit is 16 bit container whereas 24 bit is in 32 bit
         * container so update bit depth accordingly
         */
        switch (format->valid_bit_depth) {
        case SKL_DEPTH_16BIT:
                format->bit_depth = format->valid_bit_depth;
                break;

        case SKL_DEPTH_24BIT:
        case SKL_DEPTH_32BIT:
                format->bit_depth = SKL_DEPTH_32BIT;
                break;

        default:
                dev_err(dev, "Invalid bit depth %x for pipe\n",
                                format->valid_bit_depth);
                return -EINVAL;
        }

        if (params->stream == SNDRV_PCM_STREAM_PLAYBACK) {
                mconfig->ibs = (format->s_freq / 1000) *
                                (format->channels) *
                                (format->bit_depth >> 3);
        } else {
                mconfig->obs = (format->s_freq / 1000) *
                                (format->channels) *
                                (format->bit_depth >> 3);
        }

        return 0;
}

/*
 * Query the module config for the FE DAI
 * This is used to find the hw_params set for that DAI and apply to FE
 * pipeline
 */
struct skl_module_cfg *
skl_tplg_fe_get_cpr_module(struct snd_soc_dai *dai, int stream)
{
        struct snd_soc_dapm_widget *w;
        struct snd_soc_dapm_path *p = NULL;

        if (stream == SNDRV_PCM_STREAM_PLAYBACK) {
                w = dai->playback_widget;
                snd_soc_dapm_widget_for_each_sink_path(w, p) {
                        if (p->connect && p->sink->power &&
                                        !is_skl_dsp_widget_type(p->sink))
                                continue;

                        if (p->sink->priv) {
                                dev_dbg(dai->dev, "set params for %s\n",
                                                p->sink->name);
                                return p->sink->priv;
                        }
                }
        } else {
                w = dai->capture_widget;
                snd_soc_dapm_widget_for_each_source_path(w, p) {
                        if (p->connect && p->source->power &&
                                        !is_skl_dsp_widget_type(p->source))
                                continue;

                        if (p->source->priv) {
                                dev_dbg(dai->dev, "set params for %s\n",
                                                p->source->name);
                                return p->source->priv;
                        }
                }
        }

        return NULL;
}

static struct skl_module_cfg *skl_get_mconfig_pb_cpr(
                struct snd_soc_dai *dai, struct snd_soc_dapm_widget *w)
{
        struct snd_soc_dapm_path *p;
        struct skl_module_cfg *mconfig = NULL;

        snd_soc_dapm_widget_for_each_source_path(w, p) {
                if (w->endpoints[SND_SOC_DAPM_DIR_OUT] > 0) {
                        if (p->connect &&
                                    (p->sink->id == snd_soc_dapm_aif_out) &&
                                    p->source->priv) {
                                mconfig = p->source->priv;
                                return mconfig;
                        }
                        mconfig = skl_get_mconfig_pb_cpr(dai, p->source);
                        if (mconfig)
                                return mconfig;
                }
        }
        return mconfig;
}

static struct skl_module_cfg *skl_get_mconfig_cap_cpr(
                struct snd_soc_dai *dai, struct snd_soc_dapm_widget *w)
{
        struct snd_soc_dapm_path *p;
        struct skl_module_cfg *mconfig = NULL;

        snd_soc_dapm_widget_for_each_sink_path(w, p) {
                if (w->endpoints[SND_SOC_DAPM_DIR_IN] > 0) {
                        if (p->connect &&
                                    (p->source->id == snd_soc_dapm_aif_in) &&
                                    p->sink->priv) {
                                mconfig = p->sink->priv;
                                return mconfig;
                        }
                        mconfig = skl_get_mconfig_cap_cpr(dai, p->sink);
                        if (mconfig)
                                return mconfig;
                }
        }
        return mconfig;
}

struct skl_module_cfg *
skl_tplg_be_get_cpr_module(struct snd_soc_dai *dai, int stream)
{
        struct snd_soc_dapm_widget *w;
        struct skl_module_cfg *mconfig;

        if (stream == SNDRV_PCM_STREAM_PLAYBACK) {
                w = dai->playback_widget;
                mconfig = skl_get_mconfig_pb_cpr(dai, w);
        } else {
                w = dai->capture_widget;
                mconfig = skl_get_mconfig_cap_cpr(dai, w);
        }
        return mconfig;
}

static u8 skl_tplg_be_link_type(int dev_type)
{
        int ret;

        switch (dev_type) {
        case SKL_DEVICE_BT:
                ret = NHLT_LINK_SSP;
                break;

        case SKL_DEVICE_DMIC:
                ret = NHLT_LINK_DMIC;
                break;

        case SKL_DEVICE_I2S:
                ret = NHLT_LINK_SSP;
                break;

        case SKL_DEVICE_HDALINK:
                ret = NHLT_LINK_HDA;
                break;

        default:
                ret = NHLT_LINK_INVALID;
                break;
        }

        return ret;
}

/*
 * Fill the BE gateway parameters
 * The BE gateway expects a blob of parameters which are kept in the ACPI
 * NHLT blob, so query the blob for interface type (i2s/pdm) and instance.
 * The port can have multiple settings so pick based on the PCM
 * parameters
 */
static int skl_tplg_be_fill_pipe_params(struct snd_soc_dai *dai,
                                struct skl_module_cfg *mconfig,
                                struct skl_pipe_params *params)
{
        struct skl_pipe *pipe = mconfig->pipe;
        struct nhlt_specific_cfg *cfg;
        struct skl *skl = get_skl_ctx(dai->dev);
        int link_type = skl_tplg_be_link_type(mconfig->dev_type);

        memcpy(pipe->p_params, params, sizeof(*params));

        if (link_type == NHLT_LINK_HDA)
                return 0;

        /* update the blob based on virtual bus_id*/
        cfg = skl_get_ep_blob(skl, mconfig->vbus_id, link_type,
                                        params->s_fmt, params->ch,
                                        params->s_freq, params->stream);
        if (cfg) {
                mconfig->formats_config.caps_size = cfg->size;
                mconfig->formats_config.caps = (u32 *) &cfg->caps;
        } else {
                dev_err(dai->dev, "Blob NULL for id %x type %d dirn %d\n",
                                        mconfig->vbus_id, link_type,
                                        params->stream);
                dev_err(dai->dev, "PCM: ch %d, freq %d, fmt %d\n",
                                 params->ch, params->s_freq, params->s_fmt);
                return -EINVAL;
        }

        return 0;
}

static int skl_tplg_be_set_src_pipe_params(struct snd_soc_dai *dai,
                                struct snd_soc_dapm_widget *w,
                                struct skl_pipe_params *params)
{
        struct snd_soc_dapm_path *p;
        int ret = -EIO;

        snd_soc_dapm_widget_for_each_source_path(w, p) {
                if (p->connect && is_skl_dsp_widget_type(p->source) &&
                                                p->source->priv) {

                        ret = skl_tplg_be_fill_pipe_params(dai,
                                                p->source->priv, params);
                        if (ret < 0)
                                return ret;
                } else {
                        ret = skl_tplg_be_set_src_pipe_params(dai,
                                                p->source, params);
                        if (ret < 0)
                                return ret;
                }
        }

        return ret;
}

static int skl_tplg_be_set_sink_pipe_params(struct snd_soc_dai *dai,
        struct snd_soc_dapm_widget *w, struct skl_pipe_params *params)
{
        struct snd_soc_dapm_path *p = NULL;
        int ret = -EIO;

        snd_soc_dapm_widget_for_each_sink_path(w, p) {
                if (p->connect && is_skl_dsp_widget_type(p->sink) &&
                                                p->sink->priv) {

                        ret = skl_tplg_be_fill_pipe_params(dai,
                                                p->sink->priv, params);
                        if (ret < 0)
                                return ret;
                } else {
                        ret = skl_tplg_be_set_sink_pipe_params(
                                                dai, p->sink, params);
                        if (ret < 0)
                                return ret;
                }
        }

        return ret;
}

/*
 * BE hw_params can be a source parameters (capture) or sink parameters
 * (playback). Based on sink and source we need to either find the source
 * list or the sink list and set the pipeline parameters
 */
int skl_tplg_be_update_params(struct snd_soc_dai *dai,
                                struct skl_pipe_params *params)
{
        struct snd_soc_dapm_widget *w;

        if (params->stream == SNDRV_PCM_STREAM_PLAYBACK) {
                w = dai->playback_widget;

                return skl_tplg_be_set_src_pipe_params(dai, w, params);

        } else {
                w = dai->capture_widget;

                return skl_tplg_be_set_sink_pipe_params(dai, w, params);
        }

        return 0;
}

static const struct snd_soc_tplg_widget_events skl_tplg_widget_ops[] = {
        {SKL_MIXER_EVENT, skl_tplg_mixer_event},
        {SKL_VMIXER_EVENT, skl_tplg_vmixer_event},
        {SKL_PGA_EVENT, skl_tplg_pga_event},
};

static const struct snd_soc_tplg_bytes_ext_ops skl_tlv_ops[] = {
        {SKL_CONTROL_TYPE_BYTE_TLV, skl_tplg_tlv_control_get,
                                        skl_tplg_tlv_control_set},
};

/*
 * The topology binary passes the pin info for a module so initialize the pin
 * info passed into module instance
 */
static void skl_fill_module_pin_info(struct skl_dfw_module_pin *dfw_pin,
                                                struct skl_module_pin *m_pin,
                                                bool is_dynamic, int max_pin)
{
        int i;

        for (i = 0; i < max_pin; i++) {
                m_pin[i].id.module_id = dfw_pin[i].module_id;
                m_pin[i].id.instance_id = dfw_pin[i].instance_id;
                m_pin[i].in_use = false;
                m_pin[i].is_dynamic = is_dynamic;
                m_pin[i].pin_state = SKL_PIN_UNBIND;
        }
}

/*
 * Add pipeline from topology binary into driver pipeline list
 *
 * If already added we return that instance
 * Otherwise we create a new instance and add into driver list
 */
static struct skl_pipe *skl_tplg_add_pipe(struct device *dev,
                        struct skl *skl, struct skl_dfw_pipe *dfw_pipe)
{
        struct skl_pipeline *ppl;
        struct skl_pipe *pipe;
        struct skl_pipe_params *params;

        list_for_each_entry(ppl, &skl->ppl_list, node) {
                if (ppl->pipe->ppl_id == dfw_pipe->pipe_id)
                        return ppl->pipe;
        }

        ppl = devm_kzalloc(dev, sizeof(*ppl), GFP_KERNEL);
        if (!ppl)
                return NULL;

        pipe = devm_kzalloc(dev, sizeof(*pipe), GFP_KERNEL);
        if (!pipe)
                return NULL;

        params = devm_kzalloc(dev, sizeof(*params), GFP_KERNEL);
        if (!params)
                return NULL;

        pipe->ppl_id = dfw_pipe->pipe_id;
        pipe->memory_pages = dfw_pipe->memory_pages;
        pipe->pipe_priority = dfw_pipe->pipe_priority;
        pipe->conn_type = dfw_pipe->conn_type;
        pipe->state = SKL_PIPE_INVALID;
        pipe->p_params = params;
        INIT_LIST_HEAD(&pipe->w_list);

        ppl->pipe = pipe;
        list_add(&ppl->node, &skl->ppl_list);

        return ppl->pipe;
}

static void skl_tplg_fill_fmt(struct skl_module_fmt *dst_fmt,
                                struct skl_dfw_module_fmt *src_fmt,
                                int pins)
{
        int i;

        for (i = 0; i < pins; i++) {
                dst_fmt[i].channels  = src_fmt[i].channels;
                dst_fmt[i].s_freq = src_fmt[i].freq;
                dst_fmt[i].bit_depth = src_fmt[i].bit_depth;
                dst_fmt[i].valid_bit_depth = src_fmt[i].valid_bit_depth;
                dst_fmt[i].ch_cfg = src_fmt[i].ch_cfg;
                dst_fmt[i].ch_map = src_fmt[i].ch_map;
                dst_fmt[i].interleaving_style = src_fmt[i].interleaving_style;
                dst_fmt[i].sample_type = src_fmt[i].sample_type;
        }
}

/*
 * Topology core widget load callback
 *
 * This is used to save the private data for each widget which gives
 * information to the driver about module and pipeline parameters which DSP
 * FW expects like ids, resource values, formats etc
 */
static int skl_tplg_widget_load(struct snd_soc_component *cmpnt,
                                struct snd_soc_dapm_widget *w,
                                struct snd_soc_tplg_dapm_widget *tplg_w)
{
        int ret;
        struct hdac_ext_bus *ebus = snd_soc_component_get_drvdata(cmpnt);
        struct skl *skl = ebus_to_skl(ebus);
        struct hdac_bus *bus = ebus_to_hbus(ebus);
        struct skl_module_cfg *mconfig;
        struct skl_pipe *pipe;
        struct skl_dfw_module *dfw_config =
                                (struct skl_dfw_module *)tplg_w->priv.data;

        if (!tplg_w->priv.size)
                goto bind_event;

        mconfig = devm_kzalloc(bus->dev, sizeof(*mconfig), GFP_KERNEL);

        if (!mconfig)
                return -ENOMEM;

        w->priv = mconfig;
        mconfig->id.module_id = dfw_config->module_id;
        mconfig->id.instance_id = dfw_config->instance_id;
        mconfig->mcps = dfw_config->max_mcps;
        mconfig->ibs = dfw_config->ibs;
        mconfig->obs = dfw_config->obs;
        mconfig->core_id = dfw_config->core_id;
        mconfig->max_in_queue = dfw_config->max_in_queue;
        mconfig->max_out_queue = dfw_config->max_out_queue;
        mconfig->is_loadable = dfw_config->is_loadable;
        skl_tplg_fill_fmt(mconfig->in_fmt, dfw_config->in_fmt,
                                                MODULE_MAX_IN_PINS);
        skl_tplg_fill_fmt(mconfig->out_fmt, dfw_config->out_fmt,
                                                MODULE_MAX_OUT_PINS);

        mconfig->params_fixup = dfw_config->params_fixup;
        mconfig->converter = dfw_config->converter;
        mconfig->m_type = dfw_config->module_type;
        mconfig->vbus_id = dfw_config->vbus_id;
        mconfig->mem_pages = dfw_config->mem_pages;

        pipe = skl_tplg_add_pipe(bus->dev, skl, &dfw_config->pipe);
        if (pipe)
                mconfig->pipe = pipe;

        mconfig->dev_type = dfw_config->dev_type;
        mconfig->hw_conn_type = dfw_config->hw_conn_type;
        mconfig->time_slot = dfw_config->time_slot;
        mconfig->formats_config.caps_size = dfw_config->caps.caps_size;

        if (dfw_config->is_loadable)
                memcpy(mconfig->guid, dfw_config->uuid,
                                        ARRAY_SIZE(dfw_config->uuid));

        mconfig->m_in_pin = devm_kzalloc(bus->dev, (mconfig->max_in_queue) *
                                                sizeof(*mconfig->m_in_pin),
                                                GFP_KERNEL);
        if (!mconfig->m_in_pin)
                return -ENOMEM;

        mconfig->m_out_pin = devm_kzalloc(bus->dev, (mconfig->max_out_queue) *
                                                sizeof(*mconfig->m_out_pin),
                                                GFP_KERNEL);
        if (!mconfig->m_out_pin)
                return -ENOMEM;

        skl_fill_module_pin_info(dfw_config->in_pin, mconfig->m_in_pin,
                                                dfw_config->is_dynamic_in_pin,
                                                mconfig->max_in_queue);

        skl_fill_module_pin_info(dfw_config->out_pin, mconfig->m_out_pin,
                                                 dfw_config->is_dynamic_out_pin,
                                                        mconfig->max_out_queue);


        if (mconfig->formats_config.caps_size == 0)
                goto bind_event;

        mconfig->formats_config.caps = (u32 *)devm_kzalloc(bus->dev,
                        mconfig->formats_config.caps_size, GFP_KERNEL);

        if (mconfig->formats_config.caps == NULL)
                return -ENOMEM;

        memcpy(mconfig->formats_config.caps, dfw_config->caps.caps,
                                                 dfw_config->caps.caps_size);
        mconfig->formats_config.param_id = dfw_config->caps.param_id;
        mconfig->formats_config.set_params = dfw_config->caps.set_params;

bind_event:
        if (tplg_w->event_type == 0) {
                dev_dbg(bus->dev, "ASoC: No event handler required\n");
                return 0;
        }

        ret = snd_soc_tplg_widget_bind_event(w, skl_tplg_widget_ops,
                                        ARRAY_SIZE(skl_tplg_widget_ops),
                                        tplg_w->event_type);

        if (ret) {
                dev_err(bus->dev, "%s: No matching event handlers found for %d\n",
                                        __func__, tplg_w->event_type);
                return -EINVAL;
        }

        return 0;
}

static int skl_init_algo_data(struct device *dev, struct soc_bytes_ext *be,
                                        struct snd_soc_tplg_bytes_control *bc)
{
        struct skl_algo_data *ac;
        struct skl_dfw_algo_data *dfw_ac =
                                (struct skl_dfw_algo_data *)bc->priv.data;

        ac = devm_kzalloc(dev, sizeof(*ac), GFP_KERNEL);
        if (!ac)
                return -ENOMEM;

        /* Fill private data */
        ac->max = dfw_ac->max;
        ac->param_id = dfw_ac->param_id;
        ac->set_params = dfw_ac->set_params;

        if (ac->max) {
                ac->params = (char *) devm_kzalloc(dev, ac->max, GFP_KERNEL);
                if (!ac->params)
                        return -ENOMEM;

                memcpy(ac->params, dfw_ac->params, ac->max);
        }

        be->dobj.private  = ac;
        return 0;
}

static int skl_tplg_control_load(struct snd_soc_component *cmpnt,
                                struct snd_kcontrol_new *kctl,
                                struct snd_soc_tplg_ctl_hdr *hdr)
{
        struct soc_bytes_ext *sb;
        struct snd_soc_tplg_bytes_control *tplg_bc;
        struct hdac_ext_bus *ebus  = snd_soc_component_get_drvdata(cmpnt);
        struct hdac_bus *bus = ebus_to_hbus(ebus);

        switch (hdr->ops.info) {
        case SND_SOC_TPLG_CTL_BYTES:
                tplg_bc = container_of(hdr,
                                struct snd_soc_tplg_bytes_control, hdr);
                if (kctl->access & SNDRV_CTL_ELEM_ACCESS_TLV_CALLBACK) {
                        sb = (struct soc_bytes_ext *)kctl->private_value;
                        if (tplg_bc->priv.size)
                                return skl_init_algo_data(
                                                bus->dev, sb, tplg_bc);
                }
                break;

        default:
                dev_warn(bus->dev, "Control load not supported %d:%d:%d\n",
                        hdr->ops.get, hdr->ops.put, hdr->ops.info);
                break;
        }

        return 0;
}

static struct snd_soc_tplg_ops skl_tplg_ops  = {
        .widget_load = skl_tplg_widget_load,
        .control_load = skl_tplg_control_load,
        .bytes_ext_ops = skl_tlv_ops,
        .bytes_ext_ops_count = ARRAY_SIZE(skl_tlv_ops),
};

/* This will be read from topology manifest, currently defined here */
#define SKL_MAX_MCPS 30000000
#define SKL_FW_MAX_MEM 1000000

/*
 * SKL topology init routine
 */
int skl_tplg_init(struct snd_soc_platform *platform, struct hdac_ext_bus *ebus)
{
        int ret;
        const struct firmware *fw;
        struct hdac_bus *bus = ebus_to_hbus(ebus);
        struct skl *skl = ebus_to_skl(ebus);

        ret = request_firmware(&fw, skl->tplg_name, bus->dev);
        if (ret < 0) {
                dev_err(bus->dev, "tplg fw %s load failed with %d\n",
                                skl->tplg_name, ret);
                ret = request_firmware(&fw, "dfw_sst.bin", bus->dev);
                if (ret < 0) {
                        dev_err(bus->dev, "Fallback tplg fw %s load failed with %d\n",
                                        "dfw_sst.bin", ret);
                        return ret;
                }
        }

        /*
         * The complete tplg for SKL is loaded as index 0, we don't use
         * any other index
         */
        ret = snd_soc_tplg_component_load(&platform->component,
                                        &skl_tplg_ops, fw, 0);
        if (ret < 0) {
                dev_err(bus->dev, "tplg component load failed%d\n", ret);
                release_firmware(fw);
                return -EINVAL;
        }

        skl->resource.max_mcps = SKL_MAX_MCPS;
        skl->resource.max_mem = SKL_FW_MAX_MEM;

        skl->tplg = fw;

        return 0;
}