1
2
3
4
5
6
7
8
9
10
11
12#include <sound/soc.h>
13#include <sound/soc-dapm.h>
14#include <sound/jack.h>
15#include <linux/gpio.h>
16#include <linux/module.h>
17
18#include "../codecs/wm8996.h"
19#include "../codecs/wm9081.h"
20
21#define WM8996_HPSEL_GPIO 214
22#define MCLK_AUDIO_RATE (512 * 48000)
23
24static int speyside_set_bias_level(struct snd_soc_card *card,
25 struct snd_soc_dapm_context *dapm,
26 enum snd_soc_bias_level level)
27{
28 struct snd_soc_pcm_runtime *rtd;
29 struct snd_soc_dai *codec_dai;
30 int ret;
31
32 rtd = snd_soc_get_pcm_runtime(card, card->dai_link[1].name);
33 codec_dai = rtd->codec_dai;
34
35 if (dapm->dev != codec_dai->dev)
36 return 0;
37
38 switch (level) {
39 case SND_SOC_BIAS_STANDBY:
40 ret = snd_soc_dai_set_sysclk(codec_dai, WM8996_SYSCLK_MCLK2,
41 32768, SND_SOC_CLOCK_IN);
42 if (ret < 0)
43 return ret;
44
45 ret = snd_soc_dai_set_pll(codec_dai, WM8996_FLL_MCLK2,
46 0, 0, 0);
47 if (ret < 0) {
48 pr_err("Failed to stop FLL\n");
49 return ret;
50 }
51 break;
52
53 default:
54 break;
55 }
56
57 return 0;
58}
59
60static int speyside_set_bias_level_post(struct snd_soc_card *card,
61 struct snd_soc_dapm_context *dapm,
62 enum snd_soc_bias_level level)
63{
64 struct snd_soc_pcm_runtime *rtd;
65 struct snd_soc_dai *codec_dai;
66 int ret;
67
68 rtd = snd_soc_get_pcm_runtime(card, card->dai_link[1].name);
69 codec_dai = rtd->codec_dai;
70
71 if (dapm->dev != codec_dai->dev)
72 return 0;
73
74 switch (level) {
75 case SND_SOC_BIAS_PREPARE:
76 if (card->dapm.bias_level == SND_SOC_BIAS_STANDBY) {
77 ret = snd_soc_dai_set_pll(codec_dai, 0,
78 WM8996_FLL_MCLK2,
79 32768, MCLK_AUDIO_RATE);
80 if (ret < 0) {
81 pr_err("Failed to start FLL\n");
82 return ret;
83 }
84
85 ret = snd_soc_dai_set_sysclk(codec_dai,
86 WM8996_SYSCLK_FLL,
87 MCLK_AUDIO_RATE,
88 SND_SOC_CLOCK_IN);
89 if (ret < 0)
90 return ret;
91 }
92 break;
93
94 default:
95 break;
96 }
97
98 card->dapm.bias_level = level;
99
100 return 0;
101}
102
103static struct snd_soc_jack speyside_headset;
104
105
106static struct snd_soc_jack_pin speyside_headset_pins[] = {
107 {
108 .pin = "Headset Mic",
109 .mask = SND_JACK_MICROPHONE,
110 },
111};
112
113
114static int speyside_jack_polarity;
115
116static int speyside_get_micbias(struct snd_soc_dapm_widget *source,
117 struct snd_soc_dapm_widget *sink)
118{
119 if (speyside_jack_polarity && (strcmp(source->name, "MICB1") == 0))
120 return 1;
121 if (!speyside_jack_polarity && (strcmp(source->name, "MICB2") == 0))
122 return 1;
123
124 return 0;
125}
126
127static void speyside_set_polarity(struct snd_soc_codec *codec,
128 int polarity)
129{
130 speyside_jack_polarity = !polarity;
131 gpio_direction_output(WM8996_HPSEL_GPIO, speyside_jack_polarity);
132
133
134 snd_soc_dapm_sync(snd_soc_codec_get_dapm(codec));
135}
136
137static int speyside_wm0010_init(struct snd_soc_pcm_runtime *rtd)
138{
139 struct snd_soc_dai *dai = rtd->codec_dai;
140 int ret;
141
142 ret = snd_soc_dai_set_sysclk(dai, 0, MCLK_AUDIO_RATE, 0);
143 if (ret < 0)
144 return ret;
145
146 return 0;
147}
148
149static int speyside_wm8996_init(struct snd_soc_pcm_runtime *rtd)
150{
151 struct snd_soc_dai *dai = rtd->codec_dai;
152 struct snd_soc_codec *codec = rtd->codec;
153 int ret;
154
155 ret = snd_soc_dai_set_sysclk(dai, WM8996_SYSCLK_MCLK2, 32768, 0);
156 if (ret < 0)
157 return ret;
158
159 ret = gpio_request(WM8996_HPSEL_GPIO, "HP_SEL");
160 if (ret != 0)
161 pr_err("Failed to request HP_SEL GPIO: %d\n", ret);
162 gpio_direction_output(WM8996_HPSEL_GPIO, speyside_jack_polarity);
163
164 ret = snd_soc_card_jack_new(rtd->card, "Headset", SND_JACK_LINEOUT |
165 SND_JACK_HEADSET | SND_JACK_BTN_0,
166 &speyside_headset, speyside_headset_pins,
167 ARRAY_SIZE(speyside_headset_pins));
168 if (ret)
169 return ret;
170
171 wm8996_detect(codec, &speyside_headset, speyside_set_polarity);
172
173 return 0;
174}
175
176static int speyside_late_probe(struct snd_soc_card *card)
177{
178 snd_soc_dapm_ignore_suspend(&card->dapm, "Headphone");
179 snd_soc_dapm_ignore_suspend(&card->dapm, "Headset Mic");
180 snd_soc_dapm_ignore_suspend(&card->dapm, "Main AMIC");
181 snd_soc_dapm_ignore_suspend(&card->dapm, "Main DMIC");
182 snd_soc_dapm_ignore_suspend(&card->dapm, "Main Speaker");
183 snd_soc_dapm_ignore_suspend(&card->dapm, "WM1250 Output");
184 snd_soc_dapm_ignore_suspend(&card->dapm, "WM1250 Input");
185
186 return 0;
187}
188
189static const struct snd_soc_pcm_stream dsp_codec_params = {
190 .formats = SNDRV_PCM_FMTBIT_S32_LE,
191 .rate_min = 48000,
192 .rate_max = 48000,
193 .channels_min = 2,
194 .channels_max = 2,
195};
196
197static struct snd_soc_dai_link speyside_dai[] = {
198 {
199 .name = "CPU-DSP",
200 .stream_name = "CPU-DSP",
201 .cpu_dai_name = "samsung-i2s.0",
202 .codec_dai_name = "wm0010-sdi1",
203 .platform_name = "samsung-i2s.0",
204 .codec_name = "spi0.0",
205 .init = speyside_wm0010_init,
206 .dai_fmt = SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF
207 | SND_SOC_DAIFMT_CBM_CFM,
208 },
209 {
210 .name = "DSP-CODEC",
211 .stream_name = "DSP-CODEC",
212 .cpu_dai_name = "wm0010-sdi2",
213 .codec_dai_name = "wm8996-aif1",
214 .codec_name = "wm8996.1-001a",
215 .init = speyside_wm8996_init,
216 .dai_fmt = SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF
217 | SND_SOC_DAIFMT_CBM_CFM,
218 .params = &dsp_codec_params,
219 .ignore_suspend = 1,
220 },
221 {
222 .name = "Baseband",
223 .stream_name = "Baseband",
224 .cpu_dai_name = "wm8996-aif2",
225 .codec_dai_name = "wm1250-ev1",
226 .codec_name = "wm1250-ev1.1-0027",
227 .dai_fmt = SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF
228 | SND_SOC_DAIFMT_CBM_CFM,
229 .ignore_suspend = 1,
230 },
231};
232
233static int speyside_wm9081_init(struct snd_soc_component *component)
234{
235 struct snd_soc_codec *codec = snd_soc_component_to_codec(component);
236
237
238 return snd_soc_codec_set_sysclk(codec, WM9081_SYSCLK_MCLK, 0,
239 MCLK_AUDIO_RATE, 0);
240}
241
242static struct snd_soc_aux_dev speyside_aux_dev[] = {
243 {
244 .name = "wm9081",
245 .codec_name = "wm9081.1-006c",
246 .init = speyside_wm9081_init,
247 },
248};
249
250static struct snd_soc_codec_conf speyside_codec_conf[] = {
251 {
252 .dev_name = "wm9081.1-006c",
253 .name_prefix = "Sub",
254 },
255};
256
257static const struct snd_kcontrol_new controls[] = {
258 SOC_DAPM_PIN_SWITCH("Main Speaker"),
259 SOC_DAPM_PIN_SWITCH("Main DMIC"),
260 SOC_DAPM_PIN_SWITCH("Main AMIC"),
261 SOC_DAPM_PIN_SWITCH("WM1250 Input"),
262 SOC_DAPM_PIN_SWITCH("WM1250 Output"),
263 SOC_DAPM_PIN_SWITCH("Headphone"),
264};
265
266static struct snd_soc_dapm_widget widgets[] = {
267 SND_SOC_DAPM_HP("Headphone", NULL),
268 SND_SOC_DAPM_MIC("Headset Mic", NULL),
269
270 SND_SOC_DAPM_SPK("Main Speaker", NULL),
271
272 SND_SOC_DAPM_MIC("Main AMIC", NULL),
273 SND_SOC_DAPM_MIC("Main DMIC", NULL),
274};
275
276static struct snd_soc_dapm_route audio_paths[] = {
277 { "IN1RN", NULL, "MICB1" },
278 { "IN1RP", NULL, "MICB1" },
279 { "IN1RN", NULL, "MICB2" },
280 { "IN1RP", NULL, "MICB2" },
281 { "MICB1", NULL, "Headset Mic", speyside_get_micbias },
282 { "MICB2", NULL, "Headset Mic", speyside_get_micbias },
283
284 { "IN1LP", NULL, "MICB2" },
285 { "IN1RN", NULL, "MICB1" },
286 { "MICB2", NULL, "Main AMIC" },
287
288 { "DMIC1DAT", NULL, "MICB1" },
289 { "DMIC2DAT", NULL, "MICB1" },
290 { "MICB1", NULL, "Main DMIC" },
291
292 { "Headphone", NULL, "HPOUT1L" },
293 { "Headphone", NULL, "HPOUT1R" },
294
295 { "Sub IN1", NULL, "HPOUT2L" },
296 { "Sub IN2", NULL, "HPOUT2R" },
297
298 { "Main Speaker", NULL, "Sub SPKN" },
299 { "Main Speaker", NULL, "Sub SPKP" },
300 { "Main Speaker", NULL, "SPKDAT" },
301};
302
303static struct snd_soc_card speyside = {
304 .name = "Speyside",
305 .owner = THIS_MODULE,
306 .dai_link = speyside_dai,
307 .num_links = ARRAY_SIZE(speyside_dai),
308 .aux_dev = speyside_aux_dev,
309 .num_aux_devs = ARRAY_SIZE(speyside_aux_dev),
310 .codec_conf = speyside_codec_conf,
311 .num_configs = ARRAY_SIZE(speyside_codec_conf),
312
313 .set_bias_level = speyside_set_bias_level,
314 .set_bias_level_post = speyside_set_bias_level_post,
315
316 .controls = controls,
317 .num_controls = ARRAY_SIZE(controls),
318 .dapm_widgets = widgets,
319 .num_dapm_widgets = ARRAY_SIZE(widgets),
320 .dapm_routes = audio_paths,
321 .num_dapm_routes = ARRAY_SIZE(audio_paths),
322 .fully_routed = true,
323
324 .late_probe = speyside_late_probe,
325};
326
327static int speyside_probe(struct platform_device *pdev)
328{
329 struct snd_soc_card *card = &speyside;
330 int ret;
331
332 card->dev = &pdev->dev;
333
334 ret = devm_snd_soc_register_card(&pdev->dev, card);
335 if (ret)
336 dev_err(&pdev->dev, "snd_soc_register_card() failed: %d\n",
337 ret);
338
339 return ret;
340}
341
342static struct platform_driver speyside_driver = {
343 .driver = {
344 .name = "speyside",
345 .pm = &snd_soc_pm_ops,
346 },
347 .probe = speyside_probe,
348};
349
350module_platform_driver(speyside_driver);
351
352MODULE_DESCRIPTION("Speyside audio support");
353MODULE_AUTHOR("Mark Brown <broonie@opensource.wolfsonmicro.com>");
354MODULE_LICENSE("GPL");
355MODULE_ALIAS("platform:speyside");
356
