linux/drivers/power/supply/max8903_charger.c
<<
>>
Prefs
   1/*
   2 * max8903_charger.c - Maxim 8903 USB/Adapter Charger Driver
   3 *
   4 * Copyright (C) 2011 Samsung Electronics
   5 * MyungJoo Ham <myungjoo.ham@samsung.com>
   6 *
   7 * This program is free software; you can redistribute it and/or modify
   8 * it under the terms of the GNU General Public License as published by
   9 * the Free Software Foundation; either version 2 of the License, or
  10 * (at your option) any later version.
  11 *
  12 * This program is distributed in the hope that it will be useful,
  13 * but WITHOUT ANY WARRANTY; without even the implied warranty of
  14 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  15 * GNU General Public License for more details.
  16 *
  17 * You should have received a copy of the GNU General Public License
  18 * along with this program; if not, write to the Free Software
  19 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  20 *
  21 */
  22
  23#include <linux/gpio.h>
  24#include <linux/interrupt.h>
  25#include <linux/module.h>
  26#include <linux/of.h>
  27#include <linux/of_device.h>
  28#include <linux/of_gpio.h>
  29#include <linux/slab.h>
  30#include <linux/power_supply.h>
  31#include <linux/platform_device.h>
  32#include <linux/power/max8903_charger.h>
  33
  34struct max8903_data {
  35        struct max8903_pdata *pdata;
  36        struct device *dev;
  37        struct power_supply *psy;
  38        struct power_supply_desc psy_desc;
  39        bool fault;
  40        bool usb_in;
  41        bool ta_in;
  42};
  43
  44static enum power_supply_property max8903_charger_props[] = {
  45        POWER_SUPPLY_PROP_STATUS, /* Charger status output */
  46        POWER_SUPPLY_PROP_ONLINE, /* External power source */
  47        POWER_SUPPLY_PROP_HEALTH, /* Fault or OK */
  48};
  49
  50static int max8903_get_property(struct power_supply *psy,
  51                enum power_supply_property psp,
  52                union power_supply_propval *val)
  53{
  54        struct max8903_data *data = power_supply_get_drvdata(psy);
  55
  56        switch (psp) {
  57        case POWER_SUPPLY_PROP_STATUS:
  58                val->intval = POWER_SUPPLY_STATUS_UNKNOWN;
  59                if (gpio_is_valid(data->pdata->chg)) {
  60                        if (gpio_get_value(data->pdata->chg) == 0)
  61                                val->intval = POWER_SUPPLY_STATUS_CHARGING;
  62                        else if (data->usb_in || data->ta_in)
  63                                val->intval = POWER_SUPPLY_STATUS_NOT_CHARGING;
  64                        else
  65                                val->intval = POWER_SUPPLY_STATUS_DISCHARGING;
  66                }
  67                break;
  68        case POWER_SUPPLY_PROP_ONLINE:
  69                val->intval = 0;
  70                if (data->usb_in || data->ta_in)
  71                        val->intval = 1;
  72                break;
  73        case POWER_SUPPLY_PROP_HEALTH:
  74                val->intval = POWER_SUPPLY_HEALTH_GOOD;
  75                if (data->fault)
  76                        val->intval = POWER_SUPPLY_HEALTH_UNSPEC_FAILURE;
  77                break;
  78        default:
  79                return -EINVAL;
  80        }
  81
  82        return 0;
  83}
  84
  85static irqreturn_t max8903_dcin(int irq, void *_data)
  86{
  87        struct max8903_data *data = _data;
  88        struct max8903_pdata *pdata = data->pdata;
  89        bool ta_in;
  90        enum power_supply_type old_type;
  91
  92        ta_in = gpio_get_value(pdata->dok) ? false : true;
  93
  94        if (ta_in == data->ta_in)
  95                return IRQ_HANDLED;
  96
  97        data->ta_in = ta_in;
  98
  99        /* Set Current-Limit-Mode 1:DC 0:USB */
 100        if (gpio_is_valid(pdata->dcm))
 101                gpio_set_value(pdata->dcm, ta_in ? 1 : 0);
 102
 103        /* Charger Enable / Disable (cen is negated) */
 104        if (gpio_is_valid(pdata->cen))
 105                gpio_set_value(pdata->cen, ta_in ? 0 :
 106                                (data->usb_in ? 0 : 1));
 107
 108        dev_dbg(data->dev, "TA(DC-IN) Charger %s.\n", ta_in ?
 109                        "Connected" : "Disconnected");
 110
 111        old_type = data->psy_desc.type;
 112
 113        if (data->ta_in)
 114                data->psy_desc.type = POWER_SUPPLY_TYPE_MAINS;
 115        else if (data->usb_in)
 116                data->psy_desc.type = POWER_SUPPLY_TYPE_USB;
 117        else
 118                data->psy_desc.type = POWER_SUPPLY_TYPE_BATTERY;
 119
 120        if (old_type != data->psy_desc.type)
 121                power_supply_changed(data->psy);
 122
 123        return IRQ_HANDLED;
 124}
 125
 126static irqreturn_t max8903_usbin(int irq, void *_data)
 127{
 128        struct max8903_data *data = _data;
 129        struct max8903_pdata *pdata = data->pdata;
 130        bool usb_in;
 131        enum power_supply_type old_type;
 132
 133        usb_in = gpio_get_value(pdata->uok) ? false : true;
 134
 135        if (usb_in == data->usb_in)
 136                return IRQ_HANDLED;
 137
 138        data->usb_in = usb_in;
 139
 140        /* Do not touch Current-Limit-Mode */
 141
 142        /* Charger Enable / Disable (cen is negated) */
 143        if (gpio_is_valid(pdata->cen))
 144                gpio_set_value(pdata->cen, usb_in ? 0 :
 145                                (data->ta_in ? 0 : 1));
 146
 147        dev_dbg(data->dev, "USB Charger %s.\n", usb_in ?
 148                        "Connected" : "Disconnected");
 149
 150        old_type = data->psy_desc.type;
 151
 152        if (data->ta_in)
 153                data->psy_desc.type = POWER_SUPPLY_TYPE_MAINS;
 154        else if (data->usb_in)
 155                data->psy_desc.type = POWER_SUPPLY_TYPE_USB;
 156        else
 157                data->psy_desc.type = POWER_SUPPLY_TYPE_BATTERY;
 158
 159        if (old_type != data->psy_desc.type)
 160                power_supply_changed(data->psy);
 161
 162        return IRQ_HANDLED;
 163}
 164
 165static irqreturn_t max8903_fault(int irq, void *_data)
 166{
 167        struct max8903_data *data = _data;
 168        struct max8903_pdata *pdata = data->pdata;
 169        bool fault;
 170
 171        fault = gpio_get_value(pdata->flt) ? false : true;
 172
 173        if (fault == data->fault)
 174                return IRQ_HANDLED;
 175
 176        data->fault = fault;
 177
 178        if (fault)
 179                dev_err(data->dev, "Charger suffers a fault and stops.\n");
 180        else
 181                dev_err(data->dev, "Charger recovered from a fault.\n");
 182
 183        return IRQ_HANDLED;
 184}
 185
 186static struct max8903_pdata *max8903_parse_dt_data(struct device *dev)
 187{
 188        struct device_node *np = dev->of_node;
 189        struct max8903_pdata *pdata = NULL;
 190
 191        if (!np)
 192                return NULL;
 193
 194        pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL);
 195        if (!pdata)
 196                return NULL;
 197
 198        pdata->dc_valid = false;
 199        pdata->usb_valid = false;
 200
 201        pdata->cen = of_get_named_gpio(np, "cen-gpios", 0);
 202        if (!gpio_is_valid(pdata->cen))
 203                pdata->cen = -EINVAL;
 204
 205        pdata->chg = of_get_named_gpio(np, "chg-gpios", 0);
 206        if (!gpio_is_valid(pdata->chg))
 207                pdata->chg = -EINVAL;
 208
 209        pdata->flt = of_get_named_gpio(np, "flt-gpios", 0);
 210        if (!gpio_is_valid(pdata->flt))
 211                pdata->flt = -EINVAL;
 212
 213        pdata->usus = of_get_named_gpio(np, "usus-gpios", 0);
 214        if (!gpio_is_valid(pdata->usus))
 215                pdata->usus = -EINVAL;
 216
 217        pdata->dcm = of_get_named_gpio(np, "dcm-gpios", 0);
 218        if (!gpio_is_valid(pdata->dcm))
 219                pdata->dcm = -EINVAL;
 220
 221        pdata->dok = of_get_named_gpio(np, "dok-gpios", 0);
 222        if (!gpio_is_valid(pdata->dok))
 223                pdata->dok = -EINVAL;
 224        else
 225                pdata->dc_valid = true;
 226
 227        pdata->uok = of_get_named_gpio(np, "uok-gpios", 0);
 228        if (!gpio_is_valid(pdata->uok))
 229                pdata->uok = -EINVAL;
 230        else
 231                pdata->usb_valid = true;
 232
 233        return pdata;
 234}
 235
 236static int max8903_setup_gpios(struct platform_device *pdev)
 237{
 238        struct max8903_data *data = platform_get_drvdata(pdev);
 239        struct device *dev = &pdev->dev;
 240        struct max8903_pdata *pdata = pdev->dev.platform_data;
 241        int ret = 0;
 242        int gpio;
 243        int ta_in = 0;
 244        int usb_in = 0;
 245
 246        if (pdata->dc_valid) {
 247                if (gpio_is_valid(pdata->dok)) {
 248                        ret = devm_gpio_request(dev, pdata->dok,
 249                                                data->psy_desc.name);
 250                        if (ret) {
 251                                dev_err(dev,
 252                                        "Failed GPIO request for dok: %d err %d\n",
 253                                        pdata->dok, ret);
 254                                return ret;
 255                        }
 256
 257                        gpio = pdata->dok; /* PULL_UPed Interrupt */
 258                        ta_in = gpio_get_value(gpio) ? 0 : 1;
 259                } else {
 260                        dev_err(dev, "When DC is wired, DOK should be wired as well.\n");
 261                        return -EINVAL;
 262                }
 263        }
 264
 265        if (gpio_is_valid(pdata->dcm)) {
 266                ret = devm_gpio_request(dev, pdata->dcm, data->psy_desc.name);
 267                if (ret) {
 268                        dev_err(dev,
 269                                "Failed GPIO request for dcm: %d err %d\n",
 270                                pdata->dcm, ret);
 271                        return ret;
 272                }
 273
 274                gpio = pdata->dcm; /* Output */
 275                gpio_set_value(gpio, ta_in);
 276        }
 277
 278        if (pdata->usb_valid) {
 279                if (gpio_is_valid(pdata->uok)) {
 280                        ret = devm_gpio_request(dev, pdata->uok,
 281                                                data->psy_desc.name);
 282                        if (ret) {
 283                                dev_err(dev,
 284                                        "Failed GPIO request for uok: %d err %d\n",
 285                                        pdata->uok, ret);
 286                                return ret;
 287                        }
 288
 289                        gpio = pdata->uok;
 290                        usb_in = gpio_get_value(gpio) ? 0 : 1;
 291                } else {
 292                        dev_err(dev, "When USB is wired, UOK should be wired."
 293                                        "as well.\n");
 294                        return -EINVAL;
 295                }
 296        }
 297
 298        if (gpio_is_valid(pdata->cen)) {
 299                ret = devm_gpio_request(dev, pdata->cen, data->psy_desc.name);
 300                if (ret) {
 301                        dev_err(dev,
 302                                "Failed GPIO request for cen: %d err %d\n",
 303                                pdata->cen, ret);
 304                        return ret;
 305                }
 306
 307                gpio_set_value(pdata->cen, (ta_in || usb_in) ? 0 : 1);
 308        }
 309
 310        if (gpio_is_valid(pdata->chg)) {
 311                ret = devm_gpio_request(dev, pdata->chg, data->psy_desc.name);
 312                if (ret) {
 313                        dev_err(dev,
 314                                "Failed GPIO request for chg: %d err %d\n",
 315                                pdata->chg, ret);
 316                        return ret;
 317                }
 318        }
 319
 320        if (gpio_is_valid(pdata->flt)) {
 321                ret = devm_gpio_request(dev, pdata->flt, data->psy_desc.name);
 322                if (ret) {
 323                        dev_err(dev,
 324                                "Failed GPIO request for flt: %d err %d\n",
 325                                pdata->flt, ret);
 326                        return ret;
 327                }
 328        }
 329
 330        if (gpio_is_valid(pdata->usus)) {
 331                ret = devm_gpio_request(dev, pdata->usus, data->psy_desc.name);
 332                if (ret) {
 333                        dev_err(dev,
 334                                "Failed GPIO request for usus: %d err %d\n",
 335                                pdata->usus, ret);
 336                        return ret;
 337                }
 338        }
 339
 340        data->fault = false;
 341        data->ta_in = ta_in;
 342        data->usb_in = usb_in;
 343
 344        return 0;
 345}
 346
 347static int max8903_probe(struct platform_device *pdev)
 348{
 349        struct max8903_data *data;
 350        struct device *dev = &pdev->dev;
 351        struct max8903_pdata *pdata = pdev->dev.platform_data;
 352        struct power_supply_config psy_cfg = {};
 353        int ret = 0;
 354
 355        data = devm_kzalloc(dev, sizeof(struct max8903_data), GFP_KERNEL);
 356        if (!data)
 357                return -ENOMEM;
 358
 359        if (IS_ENABLED(CONFIG_OF) && !pdata && dev->of_node)
 360                pdata = max8903_parse_dt_data(dev);
 361
 362        if (!pdata) {
 363                dev_err(dev, "No platform data.\n");
 364                return -EINVAL;
 365        }
 366
 367        pdev->dev.platform_data = pdata;
 368        data->pdata = pdata;
 369        data->dev = dev;
 370        platform_set_drvdata(pdev, data);
 371
 372        if (pdata->dc_valid == false && pdata->usb_valid == false) {
 373                dev_err(dev, "No valid power sources.\n");
 374                return -EINVAL;
 375        }
 376
 377        ret = max8903_setup_gpios(pdev);
 378        if (ret)
 379                return ret;
 380
 381        data->psy_desc.name = "max8903_charger";
 382        data->psy_desc.type = (data->ta_in) ? POWER_SUPPLY_TYPE_MAINS :
 383                        ((data->usb_in) ? POWER_SUPPLY_TYPE_USB :
 384                         POWER_SUPPLY_TYPE_BATTERY);
 385        data->psy_desc.get_property = max8903_get_property;
 386        data->psy_desc.properties = max8903_charger_props;
 387        data->psy_desc.num_properties = ARRAY_SIZE(max8903_charger_props);
 388
 389        psy_cfg.of_node = dev->of_node;
 390        psy_cfg.drv_data = data;
 391
 392        data->psy = devm_power_supply_register(dev, &data->psy_desc, &psy_cfg);
 393        if (IS_ERR(data->psy)) {
 394                dev_err(dev, "failed: power supply register.\n");
 395                return PTR_ERR(data->psy);
 396        }
 397
 398        if (pdata->dc_valid) {
 399                ret = devm_request_threaded_irq(dev, gpio_to_irq(pdata->dok),
 400                                        NULL, max8903_dcin,
 401                                        IRQF_TRIGGER_FALLING |
 402                                        IRQF_TRIGGER_RISING | IRQF_ONESHOT,
 403                                        "MAX8903 DC IN", data);
 404                if (ret) {
 405                        dev_err(dev, "Cannot request irq %d for DC (%d)\n",
 406                                        gpio_to_irq(pdata->dok), ret);
 407                        return ret;
 408                }
 409        }
 410
 411        if (pdata->usb_valid) {
 412                ret = devm_request_threaded_irq(dev, gpio_to_irq(pdata->uok),
 413                                        NULL, max8903_usbin,
 414                                        IRQF_TRIGGER_FALLING |
 415                                        IRQF_TRIGGER_RISING | IRQF_ONESHOT,
 416                                        "MAX8903 USB IN", data);
 417                if (ret) {
 418                        dev_err(dev, "Cannot request irq %d for USB (%d)\n",
 419                                        gpio_to_irq(pdata->uok), ret);
 420                        return ret;
 421                }
 422        }
 423
 424        if (gpio_is_valid(pdata->flt)) {
 425                ret = devm_request_threaded_irq(dev, gpio_to_irq(pdata->flt),
 426                                        NULL, max8903_fault,
 427                                        IRQF_TRIGGER_FALLING |
 428                                        IRQF_TRIGGER_RISING | IRQF_ONESHOT,
 429                                        "MAX8903 Fault", data);
 430                if (ret) {
 431                        dev_err(dev, "Cannot request irq %d for Fault (%d)\n",
 432                                        gpio_to_irq(pdata->flt), ret);
 433                        return ret;
 434                }
 435        }
 436
 437        return 0;
 438}
 439
 440static const struct of_device_id max8903_match_ids[] = {
 441        { .compatible = "maxim,max8903", },
 442        { /* sentinel */ }
 443};
 444MODULE_DEVICE_TABLE(of, max8903_match_ids);
 445
 446static struct platform_driver max8903_driver = {
 447        .probe  = max8903_probe,
 448        .driver = {
 449                .name   = "max8903-charger",
 450                .of_match_table = max8903_match_ids
 451        },
 452};
 453
 454module_platform_driver(max8903_driver);
 455
 456MODULE_LICENSE("GPL");
 457MODULE_DESCRIPTION("MAX8903 Charger Driver");
 458MODULE_AUTHOR("MyungJoo Ham <myungjoo.ham@samsung.com>");
 459MODULE_ALIAS("platform:max8903-charger");
 460