1/* 2 * OMAP Smartreflex Defines and Routines 3 * 4 * Author: Thara Gopinath <thara@ti.com> 5 * 6 * Copyright (C) 2010 Texas Instruments, Inc. 7 * Thara Gopinath <thara@ti.com> 8 * 9 * Copyright (C) 2008 Nokia Corporation 10 * Kalle Jokiniemi 11 * 12 * Copyright (C) 2007 Texas Instruments, Inc. 13 * Lesly A M <x0080970@ti.com> 14 * 15 * This program is free software; you can redistribute it and/or modify 16 * it under the terms of the GNU General Public License version 2 as 17 * published by the Free Software Foundation. 18 */ 19 20#ifndef __POWER_SMARTREFLEX_H 21#define __POWER_SMARTREFLEX_H 22 23#include <linux/types.h> 24#include <linux/platform_device.h> 25#include <linux/delay.h> 26#include <linux/platform_data/voltage-omap.h> 27 28/* 29 * Different Smartreflex IPs version. The v1 is the 65nm version used in 30 * OMAP3430. The v2 is the update for the 45nm version of the IP 31 * used in OMAP3630 and OMAP4430 32 */ 33#define SR_TYPE_V1 1 34#define SR_TYPE_V2 2 35 36/* SMART REFLEX REG ADDRESS OFFSET */ 37#define SRCONFIG 0x00 38#define SRSTATUS 0x04 39#define SENVAL 0x08 40#define SENMIN 0x0C 41#define SENMAX 0x10 42#define SENAVG 0x14 43#define AVGWEIGHT 0x18 44#define NVALUERECIPROCAL 0x1c 45#define SENERROR_V1 0x20 46#define ERRCONFIG_V1 0x24 47#define IRQ_EOI 0x20 48#define IRQSTATUS_RAW 0x24 49#define IRQSTATUS 0x28 50#define IRQENABLE_SET 0x2C 51#define IRQENABLE_CLR 0x30 52#define SENERROR_V2 0x34 53#define ERRCONFIG_V2 0x38 54 55/* Bit/Shift Positions */ 56 57/* SRCONFIG */ 58#define SRCONFIG_ACCUMDATA_SHIFT 22 59#define SRCONFIG_SRCLKLENGTH_SHIFT 12 60#define SRCONFIG_SENNENABLE_V1_SHIFT 5 61#define SRCONFIG_SENPENABLE_V1_SHIFT 3 62#define SRCONFIG_SENNENABLE_V2_SHIFT 1 63#define SRCONFIG_SENPENABLE_V2_SHIFT 0 64#define SRCONFIG_CLKCTRL_SHIFT 0 65 66#define SRCONFIG_ACCUMDATA_MASK (0x3ff << 22) 67 68#define SRCONFIG_SRENABLE BIT(11) 69#define SRCONFIG_SENENABLE BIT(10) 70#define SRCONFIG_ERRGEN_EN BIT(9) 71#define SRCONFIG_MINMAXAVG_EN BIT(8) 72#define SRCONFIG_DELAYCTRL BIT(2) 73 74/* AVGWEIGHT */ 75#define AVGWEIGHT_SENPAVGWEIGHT_SHIFT 2 76#define AVGWEIGHT_SENNAVGWEIGHT_SHIFT 0 77 78/* NVALUERECIPROCAL */ 79#define NVALUERECIPROCAL_SENPGAIN_SHIFT 20 80#define NVALUERECIPROCAL_SENNGAIN_SHIFT 16 81#define NVALUERECIPROCAL_RNSENP_SHIFT 8 82#define NVALUERECIPROCAL_RNSENN_SHIFT 0 83 84/* ERRCONFIG */ 85#define ERRCONFIG_ERRWEIGHT_SHIFT 16 86#define ERRCONFIG_ERRMAXLIMIT_SHIFT 8 87#define ERRCONFIG_ERRMINLIMIT_SHIFT 0 88 89#define SR_ERRWEIGHT_MASK (0x07 << 16) 90#define SR_ERRMAXLIMIT_MASK (0xff << 8) 91#define SR_ERRMINLIMIT_MASK (0xff << 0) 92 93#define ERRCONFIG_VPBOUNDINTEN_V1 BIT(31) 94#define ERRCONFIG_VPBOUNDINTST_V1 BIT(30) 95#define ERRCONFIG_MCUACCUMINTEN BIT(29) 96#define ERRCONFIG_MCUACCUMINTST BIT(28) 97#define ERRCONFIG_MCUVALIDINTEN BIT(27) 98#define ERRCONFIG_MCUVALIDINTST BIT(26) 99#define ERRCONFIG_MCUBOUNDINTEN BIT(25) 100#define ERRCONFIG_MCUBOUNDINTST BIT(24) 101#define ERRCONFIG_MCUDISACKINTEN BIT(23) 102#define ERRCONFIG_VPBOUNDINTST_V2 BIT(23) 103#define ERRCONFIG_MCUDISACKINTST BIT(22) 104#define ERRCONFIG_VPBOUNDINTEN_V2 BIT(22) 105 106#define ERRCONFIG_STATUS_V1_MASK (ERRCONFIG_VPBOUNDINTST_V1 | \ 107 ERRCONFIG_MCUACCUMINTST | \ 108 ERRCONFIG_MCUVALIDINTST | \ 109 ERRCONFIG_MCUBOUNDINTST | \ 110 ERRCONFIG_MCUDISACKINTST) 111/* IRQSTATUS */ 112#define IRQSTATUS_MCUACCUMINT BIT(3) 113#define IRQSTATUS_MCVALIDINT BIT(2) 114#define IRQSTATUS_MCBOUNDSINT BIT(1) 115#define IRQSTATUS_MCUDISABLEACKINT BIT(0) 116 117/* IRQENABLE_SET and IRQENABLE_CLEAR */ 118#define IRQENABLE_MCUACCUMINT BIT(3) 119#define IRQENABLE_MCUVALIDINT BIT(2) 120#define IRQENABLE_MCUBOUNDSINT BIT(1) 121#define IRQENABLE_MCUDISABLEACKINT BIT(0) 122 123/* Common Bit values */ 124 125#define SRCLKLENGTH_12MHZ_SYSCLK 0x3c 126#define SRCLKLENGTH_13MHZ_SYSCLK 0x41 127#define SRCLKLENGTH_19MHZ_SYSCLK 0x60 128#define SRCLKLENGTH_26MHZ_SYSCLK 0x82 129#define SRCLKLENGTH_38MHZ_SYSCLK 0xC0 130 131/* 132 * 3430 specific values. Maybe these should be passed from board file or 133 * pmic structures. 134 */ 135#define OMAP3430_SR_ACCUMDATA 0x1f4 136 137#define OMAP3430_SR1_SENPAVGWEIGHT 0x03 138#define OMAP3430_SR1_SENNAVGWEIGHT 0x03 139 140#define OMAP3430_SR2_SENPAVGWEIGHT 0x01 141#define OMAP3430_SR2_SENNAVGWEIGHT 0x01 142 143#define OMAP3430_SR_ERRWEIGHT 0x04 144#define OMAP3430_SR_ERRMAXLIMIT 0x02 145 146struct omap_sr { 147 char *name; 148 struct list_head node; 149 struct platform_device *pdev; 150 struct omap_sr_nvalue_table *nvalue_table; 151 struct voltagedomain *voltdm; 152 struct dentry *dbg_dir; 153 unsigned int irq; 154 int srid; 155 int ip_type; 156 int nvalue_count; 157 bool autocomp_active; 158 u32 clk_length; 159 u32 err_weight; 160 u32 err_minlimit; 161 u32 err_maxlimit; 162 u32 accum_data; 163 u32 senn_avgweight; 164 u32 senp_avgweight; 165 u32 senp_mod; 166 u32 senn_mod; 167 void __iomem *base; 168}; 169 170/** 171 * test_cond_timeout - busy-loop, testing a condition 172 * @cond: condition to test until it evaluates to true 173 * @timeout: maximum number of microseconds in the timeout 174 * @index: loop index (integer) 175 * 176 * Loop waiting for @cond to become true or until at least @timeout 177 * microseconds have passed. To use, define some integer @index in the 178 * calling code. After running, if @index == @timeout, then the loop has 179 * timed out. 180 * 181 * Copied from omap_test_timeout */ 182#define sr_test_cond_timeout(cond, timeout, index) \ 183({ \ 184 for (index = 0; index < timeout; index++) { \ 185 if (cond) \ 186 break; \ 187 udelay(1); \ 188 } \ 189}) 190 191/** 192 * struct omap_sr_pmic_data - Strucutre to be populated by pmic code to pass 193 * pmic specific info to smartreflex driver 194 * 195 * @sr_pmic_init: API to initialize smartreflex on the PMIC side. 196 */ 197struct omap_sr_pmic_data { 198 void (*sr_pmic_init) (void); 199}; 200 201/** 202 * struct omap_smartreflex_dev_attr - Smartreflex Device attribute. 203 * 204 * @sensor_voltdm_name: Name of voltdomain of SR instance 205 */ 206struct omap_smartreflex_dev_attr { 207 const char *sensor_voltdm_name; 208}; 209 210#ifdef CONFIG_POWER_AVS_OMAP 211/* 212 * The smart reflex driver supports CLASS1 CLASS2 and CLASS3 SR. 213 * The smartreflex class driver should pass the class type. 214 * Should be used to populate the class_type field of the 215 * omap_smartreflex_class_data structure. 216 */ 217#define SR_CLASS1 0x1 218#define SR_CLASS2 0x2 219#define SR_CLASS3 0x3 220 221/** 222 * struct omap_sr_class_data - Smartreflex class driver info 223 * 224 * @enable: API to enable a particular class smaartreflex. 225 * @disable: API to disable a particular class smartreflex. 226 * @configure: API to configure a particular class smartreflex. 227 * @notify: API to notify the class driver about an event in SR. 228 * Not needed for class3. 229 * @notify_flags: specify the events to be notified to the class driver 230 * @class_type: specify which smartreflex class. 231 * Can be used by the SR driver to take any class 232 * based decisions. 233 */ 234struct omap_sr_class_data { 235 int (*enable)(struct omap_sr *sr); 236 int (*disable)(struct omap_sr *sr, int is_volt_reset); 237 int (*configure)(struct omap_sr *sr); 238 int (*notify)(struct omap_sr *sr, u32 status); 239 u8 notify_flags; 240 u8 class_type; 241}; 242 243/** 244 * struct omap_sr_nvalue_table - Smartreflex n-target value info 245 * 246 * @efuse_offs: The offset of the efuse where n-target values are stored. 247 * @nvalue: The n-target value. 248 * @errminlimit: The value of the ERRMINLIMIT bitfield for this n-target 249 * @volt_nominal: microvolts DC that the VDD is initially programmed to 250 */ 251struct omap_sr_nvalue_table { 252 u32 efuse_offs; 253 u32 nvalue; 254 u32 errminlimit; 255 unsigned long volt_nominal; 256}; 257 258/** 259 * struct omap_sr_data - Smartreflex platform data. 260 * 261 * @name: instance name 262 * @ip_type: Smartreflex IP type. 263 * @senp_mod: SENPENABLE value of the sr CONFIG register 264 * @senn_mod: SENNENABLE value for sr CONFIG register 265 * @err_weight ERRWEIGHT value of the sr ERRCONFIG register 266 * @err_maxlimit ERRMAXLIMIT value of the sr ERRCONFIG register 267 * @accum_data ACCUMDATA value of the sr CONFIG register 268 * @senn_avgweight SENNAVGWEIGHT value of the sr AVGWEIGHT register 269 * @senp_avgweight SENPAVGWEIGHT value of the sr AVGWEIGHT register 270 * @nvalue_count: Number of distinct nvalues in the nvalue table 271 * @enable_on_init: whether this sr module needs to enabled at 272 * boot up or not. 273 * @nvalue_table: table containing the efuse offsets and nvalues 274 * corresponding to them. 275 * @voltdm: Pointer to the voltage domain associated with the SR 276 */ 277struct omap_sr_data { 278 const char *name; 279 int ip_type; 280 u32 senp_mod; 281 u32 senn_mod; 282 u32 err_weight; 283 u32 err_maxlimit; 284 u32 accum_data; 285 u32 senn_avgweight; 286 u32 senp_avgweight; 287 int nvalue_count; 288 bool enable_on_init; 289 struct omap_sr_nvalue_table *nvalue_table; 290 struct voltagedomain *voltdm; 291}; 292 293/* Smartreflex module enable/disable interface */ 294void omap_sr_enable(struct voltagedomain *voltdm); 295void omap_sr_disable(struct voltagedomain *voltdm); 296void omap_sr_disable_reset_volt(struct voltagedomain *voltdm); 297 298/* API to register the pmic specific data with the smartreflex driver. */ 299void omap_sr_register_pmic(struct omap_sr_pmic_data *pmic_data); 300 301/* Smartreflex driver hooks to be called from Smartreflex class driver */ 302int sr_enable(struct omap_sr *sr, unsigned long volt); 303void sr_disable(struct omap_sr *sr); 304int sr_configure_errgen(struct omap_sr *sr); 305int sr_disable_errgen(struct omap_sr *sr); 306int sr_configure_minmax(struct omap_sr *sr); 307 308/* API to register the smartreflex class driver with the smartreflex driver */ 309int sr_register_class(struct omap_sr_class_data *class_data); 310#else 311static inline void omap_sr_enable(struct voltagedomain *voltdm) {} 312static inline void omap_sr_disable(struct voltagedomain *voltdm) {} 313static inline void omap_sr_disable_reset_volt( 314 struct voltagedomain *voltdm) {} 315static inline void omap_sr_register_pmic( 316 struct omap_sr_pmic_data *pmic_data) {} 317#endif 318#endif 319