linux/drivers/net/wireless/ralink/rt2x00/rt2800usb.c
<<
>>
Prefs
   1/*
   2        Copyright (C) 2010 Willow Garage <http://www.willowgarage.com>
   3        Copyright (C) 2009 - 2010 Ivo van Doorn <IvDoorn@gmail.com>
   4        Copyright (C) 2009 Mattias Nissler <mattias.nissler@gmx.de>
   5        Copyright (C) 2009 Felix Fietkau <nbd@openwrt.org>
   6        Copyright (C) 2009 Xose Vazquez Perez <xose.vazquez@gmail.com>
   7        Copyright (C) 2009 Axel Kollhofer <rain_maker@root-forum.org>
   8        <http://rt2x00.serialmonkey.com>
   9
  10        This program is free software; you can redistribute it and/or modify
  11        it under the terms of the GNU General Public License as published by
  12        the Free Software Foundation; either version 2 of the License, or
  13        (at your option) any later version.
  14
  15        This program is distributed in the hope that it will be useful,
  16        but WITHOUT ANY WARRANTY; without even the implied warranty of
  17        MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
  18        GNU General Public License for more details.
  19
  20        You should have received a copy of the GNU General Public License
  21        along with this program; if not, see <http://www.gnu.org/licenses/>.
  22 */
  23
  24/*
  25        Module: rt2800usb
  26        Abstract: rt2800usb device specific routines.
  27        Supported chipsets: RT2800U.
  28 */
  29
  30#include <linux/delay.h>
  31#include <linux/etherdevice.h>
  32#include <linux/kernel.h>
  33#include <linux/module.h>
  34#include <linux/usb.h>
  35
  36#include "rt2x00.h"
  37#include "rt2x00usb.h"
  38#include "rt2800lib.h"
  39#include "rt2800.h"
  40#include "rt2800usb.h"
  41
  42/*
  43 * Allow hardware encryption to be disabled.
  44 */
  45static bool modparam_nohwcrypt;
  46module_param_named(nohwcrypt, modparam_nohwcrypt, bool, S_IRUGO);
  47MODULE_PARM_DESC(nohwcrypt, "Disable hardware encryption.");
  48
  49static bool rt2800usb_hwcrypt_disabled(struct rt2x00_dev *rt2x00dev)
  50{
  51        return modparam_nohwcrypt;
  52}
  53
  54/*
  55 * Queue handlers.
  56 */
  57static void rt2800usb_start_queue(struct data_queue *queue)
  58{
  59        struct rt2x00_dev *rt2x00dev = queue->rt2x00dev;
  60        u32 reg;
  61
  62        switch (queue->qid) {
  63        case QID_RX:
  64                rt2x00usb_register_read(rt2x00dev, MAC_SYS_CTRL, &reg);
  65                rt2x00_set_field32(&reg, MAC_SYS_CTRL_ENABLE_RX, 1);
  66                rt2x00usb_register_write(rt2x00dev, MAC_SYS_CTRL, reg);
  67                break;
  68        case QID_BEACON:
  69                rt2x00usb_register_read(rt2x00dev, BCN_TIME_CFG, &reg);
  70                rt2x00_set_field32(&reg, BCN_TIME_CFG_TSF_TICKING, 1);
  71                rt2x00_set_field32(&reg, BCN_TIME_CFG_TBTT_ENABLE, 1);
  72                rt2x00_set_field32(&reg, BCN_TIME_CFG_BEACON_GEN, 1);
  73                rt2x00usb_register_write(rt2x00dev, BCN_TIME_CFG, reg);
  74                break;
  75        default:
  76                break;
  77        }
  78}
  79
  80static void rt2800usb_stop_queue(struct data_queue *queue)
  81{
  82        struct rt2x00_dev *rt2x00dev = queue->rt2x00dev;
  83        u32 reg;
  84
  85        switch (queue->qid) {
  86        case QID_RX:
  87                rt2x00usb_register_read(rt2x00dev, MAC_SYS_CTRL, &reg);
  88                rt2x00_set_field32(&reg, MAC_SYS_CTRL_ENABLE_RX, 0);
  89                rt2x00usb_register_write(rt2x00dev, MAC_SYS_CTRL, reg);
  90                break;
  91        case QID_BEACON:
  92                rt2x00usb_register_read(rt2x00dev, BCN_TIME_CFG, &reg);
  93                rt2x00_set_field32(&reg, BCN_TIME_CFG_TSF_TICKING, 0);
  94                rt2x00_set_field32(&reg, BCN_TIME_CFG_TBTT_ENABLE, 0);
  95                rt2x00_set_field32(&reg, BCN_TIME_CFG_BEACON_GEN, 0);
  96                rt2x00usb_register_write(rt2x00dev, BCN_TIME_CFG, reg);
  97                break;
  98        default:
  99                break;
 100        }
 101}
 102
 103/*
 104 * test if there is an entry in any TX queue for which DMA is done
 105 * but the TX status has not been returned yet
 106 */
 107static bool rt2800usb_txstatus_pending(struct rt2x00_dev *rt2x00dev)
 108{
 109        struct data_queue *queue;
 110
 111        tx_queue_for_each(rt2x00dev, queue) {
 112                if (rt2x00queue_get_entry(queue, Q_INDEX_DMA_DONE) !=
 113                    rt2x00queue_get_entry(queue, Q_INDEX_DONE))
 114                        return true;
 115        }
 116        return false;
 117}
 118
 119static inline bool rt2800usb_entry_txstatus_timeout(struct queue_entry *entry)
 120{
 121        bool tout;
 122
 123        if (!test_bit(ENTRY_DATA_STATUS_PENDING, &entry->flags))
 124                return false;
 125
 126        tout = time_after(jiffies, entry->last_action + msecs_to_jiffies(100));
 127        if (unlikely(tout))
 128                rt2x00_dbg(entry->queue->rt2x00dev,
 129                           "TX status timeout for entry %d in queue %d\n",
 130                           entry->entry_idx, entry->queue->qid);
 131        return tout;
 132
 133}
 134
 135static bool rt2800usb_txstatus_timeout(struct rt2x00_dev *rt2x00dev)
 136{
 137        struct data_queue *queue;
 138        struct queue_entry *entry;
 139
 140        tx_queue_for_each(rt2x00dev, queue) {
 141                entry = rt2x00queue_get_entry(queue, Q_INDEX_DONE);
 142                if (rt2800usb_entry_txstatus_timeout(entry))
 143                        return true;
 144        }
 145        return false;
 146}
 147
 148#define TXSTATUS_READ_INTERVAL 1000000
 149
 150static bool rt2800usb_tx_sta_fifo_read_completed(struct rt2x00_dev *rt2x00dev,
 151                                                 int urb_status, u32 tx_status)
 152{
 153        bool valid;
 154
 155        if (urb_status) {
 156                rt2x00_warn(rt2x00dev, "TX status read failed %d\n",
 157                            urb_status);
 158
 159                goto stop_reading;
 160        }
 161
 162        valid = rt2x00_get_field32(tx_status, TX_STA_FIFO_VALID);
 163        if (valid) {
 164                if (!kfifo_put(&rt2x00dev->txstatus_fifo, tx_status))
 165                        rt2x00_warn(rt2x00dev, "TX status FIFO overrun\n");
 166
 167                queue_work(rt2x00dev->workqueue, &rt2x00dev->txdone_work);
 168
 169                /* Reschedule urb to read TX status again instantly */
 170                return true;
 171        }
 172
 173        /* Check if there is any entry that timedout waiting on TX status */
 174        if (rt2800usb_txstatus_timeout(rt2x00dev))
 175                queue_work(rt2x00dev->workqueue, &rt2x00dev->txdone_work);
 176
 177        if (rt2800usb_txstatus_pending(rt2x00dev)) {
 178                /* Read register after 1 ms */
 179                hrtimer_start(&rt2x00dev->txstatus_timer,
 180                              ktime_set(0, TXSTATUS_READ_INTERVAL),
 181                              HRTIMER_MODE_REL);
 182                return false;
 183        }
 184
 185stop_reading:
 186        clear_bit(TX_STATUS_READING, &rt2x00dev->flags);
 187        /*
 188         * There is small race window above, between txstatus pending check and
 189         * clear_bit someone could do rt2x00usb_interrupt_txdone, so recheck
 190         * here again if status reading is needed.
 191         */
 192        if (rt2800usb_txstatus_pending(rt2x00dev) &&
 193            !test_and_set_bit(TX_STATUS_READING, &rt2x00dev->flags))
 194                return true;
 195        else
 196                return false;
 197}
 198
 199static void rt2800usb_async_read_tx_status(struct rt2x00_dev *rt2x00dev)
 200{
 201
 202        if (test_and_set_bit(TX_STATUS_READING, &rt2x00dev->flags))
 203                return;
 204
 205        /* Read TX_STA_FIFO register after 2 ms */
 206        hrtimer_start(&rt2x00dev->txstatus_timer,
 207                      ktime_set(0, 2*TXSTATUS_READ_INTERVAL),
 208                      HRTIMER_MODE_REL);
 209}
 210
 211static void rt2800usb_tx_dma_done(struct queue_entry *entry)
 212{
 213        struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev;
 214
 215        rt2800usb_async_read_tx_status(rt2x00dev);
 216}
 217
 218static enum hrtimer_restart rt2800usb_tx_sta_fifo_timeout(struct hrtimer *timer)
 219{
 220        struct rt2x00_dev *rt2x00dev =
 221            container_of(timer, struct rt2x00_dev, txstatus_timer);
 222
 223        rt2x00usb_register_read_async(rt2x00dev, TX_STA_FIFO,
 224                                      rt2800usb_tx_sta_fifo_read_completed);
 225
 226        return HRTIMER_NORESTART;
 227}
 228
 229/*
 230 * Firmware functions
 231 */
 232static int rt2800usb_autorun_detect(struct rt2x00_dev *rt2x00dev)
 233{
 234        __le32 *reg;
 235        u32 fw_mode;
 236        int ret;
 237
 238        reg = kmalloc(sizeof(*reg), GFP_KERNEL);
 239        if (reg == NULL)
 240                return -ENOMEM;
 241        /* cannot use rt2x00usb_register_read here as it uses different
 242         * mode (MULTI_READ vs. DEVICE_MODE) and does not pass the
 243         * magic value USB_MODE_AUTORUN (0x11) to the device, thus the
 244         * returned value would be invalid.
 245         */
 246        ret = rt2x00usb_vendor_request(rt2x00dev, USB_DEVICE_MODE,
 247                                       USB_VENDOR_REQUEST_IN, 0,
 248                                       USB_MODE_AUTORUN, reg, sizeof(*reg),
 249                                       REGISTER_TIMEOUT_FIRMWARE);
 250        fw_mode = le32_to_cpu(*reg);
 251        kfree(reg);
 252        if (ret < 0)
 253                return ret;
 254
 255        if ((fw_mode & 0x00000003) == 2)
 256                return 1;
 257
 258        return 0;
 259}
 260
 261static char *rt2800usb_get_firmware_name(struct rt2x00_dev *rt2x00dev)
 262{
 263        return FIRMWARE_RT2870;
 264}
 265
 266static int rt2800usb_write_firmware(struct rt2x00_dev *rt2x00dev,
 267                                    const u8 *data, const size_t len)
 268{
 269        int status;
 270        u32 offset;
 271        u32 length;
 272        int retval;
 273
 274        /*
 275         * Check which section of the firmware we need.
 276         */
 277        if (rt2x00_rt(rt2x00dev, RT2860) ||
 278            rt2x00_rt(rt2x00dev, RT2872) ||
 279            rt2x00_rt(rt2x00dev, RT3070)) {
 280                offset = 0;
 281                length = 4096;
 282        } else {
 283                offset = 4096;
 284                length = 4096;
 285        }
 286
 287        /*
 288         * Write firmware to device.
 289         */
 290        retval = rt2800usb_autorun_detect(rt2x00dev);
 291        if (retval < 0)
 292                return retval;
 293        if (retval) {
 294                rt2x00_info(rt2x00dev,
 295                            "Firmware loading not required - NIC in AutoRun mode\n");
 296                __clear_bit(REQUIRE_FIRMWARE, &rt2x00dev->cap_flags);
 297        } else {
 298                rt2x00usb_register_multiwrite(rt2x00dev, FIRMWARE_IMAGE_BASE,
 299                                              data + offset, length);
 300        }
 301
 302        rt2x00usb_register_write(rt2x00dev, H2M_MAILBOX_CID, ~0);
 303        rt2x00usb_register_write(rt2x00dev, H2M_MAILBOX_STATUS, ~0);
 304
 305        /*
 306         * Send firmware request to device to load firmware,
 307         * we need to specify a long timeout time.
 308         */
 309        status = rt2x00usb_vendor_request_sw(rt2x00dev, USB_DEVICE_MODE,
 310                                             0, USB_MODE_FIRMWARE,
 311                                             REGISTER_TIMEOUT_FIRMWARE);
 312        if (status < 0) {
 313                rt2x00_err(rt2x00dev, "Failed to write Firmware to device\n");
 314                return status;
 315        }
 316
 317        msleep(10);
 318        rt2x00usb_register_write(rt2x00dev, H2M_MAILBOX_CSR, 0);
 319
 320        return 0;
 321}
 322
 323/*
 324 * Device state switch handlers.
 325 */
 326static int rt2800usb_init_registers(struct rt2x00_dev *rt2x00dev)
 327{
 328        u32 reg;
 329
 330        /*
 331         * Wait until BBP and RF are ready.
 332         */
 333        if (rt2800_wait_csr_ready(rt2x00dev))
 334                return -EBUSY;
 335
 336        rt2x00usb_register_read(rt2x00dev, PBF_SYS_CTRL, &reg);
 337        rt2x00usb_register_write(rt2x00dev, PBF_SYS_CTRL, reg & ~0x00002000);
 338
 339        reg = 0;
 340        rt2x00_set_field32(&reg, MAC_SYS_CTRL_RESET_CSR, 1);
 341        rt2x00_set_field32(&reg, MAC_SYS_CTRL_RESET_BBP, 1);
 342        rt2x00usb_register_write(rt2x00dev, MAC_SYS_CTRL, reg);
 343
 344        rt2x00usb_register_write(rt2x00dev, USB_DMA_CFG, 0x00000000);
 345
 346        rt2x00usb_vendor_request_sw(rt2x00dev, USB_DEVICE_MODE, 0,
 347                                    USB_MODE_RESET, REGISTER_TIMEOUT);
 348
 349        rt2x00usb_register_write(rt2x00dev, MAC_SYS_CTRL, 0x00000000);
 350
 351        return 0;
 352}
 353
 354static int rt2800usb_enable_radio(struct rt2x00_dev *rt2x00dev)
 355{
 356        u32 reg;
 357
 358        if (unlikely(rt2800_wait_wpdma_ready(rt2x00dev)))
 359                return -EIO;
 360
 361        rt2x00usb_register_read(rt2x00dev, USB_DMA_CFG, &reg);
 362        rt2x00_set_field32(&reg, USB_DMA_CFG_PHY_CLEAR, 0);
 363        rt2x00_set_field32(&reg, USB_DMA_CFG_RX_BULK_AGG_EN, 0);
 364        rt2x00_set_field32(&reg, USB_DMA_CFG_RX_BULK_AGG_TIMEOUT, 128);
 365        /*
 366         * Total room for RX frames in kilobytes, PBF might still exceed
 367         * this limit so reduce the number to prevent errors.
 368         */
 369        rt2x00_set_field32(&reg, USB_DMA_CFG_RX_BULK_AGG_LIMIT,
 370                           ((rt2x00dev->rx->limit * DATA_FRAME_SIZE)
 371                            / 1024) - 3);
 372        rt2x00_set_field32(&reg, USB_DMA_CFG_RX_BULK_EN, 1);
 373        rt2x00_set_field32(&reg, USB_DMA_CFG_TX_BULK_EN, 1);
 374        rt2x00usb_register_write(rt2x00dev, USB_DMA_CFG, reg);
 375
 376        return rt2800_enable_radio(rt2x00dev);
 377}
 378
 379static void rt2800usb_disable_radio(struct rt2x00_dev *rt2x00dev)
 380{
 381        rt2800_disable_radio(rt2x00dev);
 382}
 383
 384static int rt2800usb_set_state(struct rt2x00_dev *rt2x00dev,
 385                               enum dev_state state)
 386{
 387        if (state == STATE_AWAKE)
 388                rt2800_mcu_request(rt2x00dev, MCU_WAKEUP, 0xff, 0, 2);
 389        else
 390                rt2800_mcu_request(rt2x00dev, MCU_SLEEP, 0xff, 0xff, 2);
 391
 392        return 0;
 393}
 394
 395static int rt2800usb_set_device_state(struct rt2x00_dev *rt2x00dev,
 396                                      enum dev_state state)
 397{
 398        int retval = 0;
 399
 400        switch (state) {
 401        case STATE_RADIO_ON:
 402                /*
 403                 * Before the radio can be enabled, the device first has
 404                 * to be woken up. After that it needs a bit of time
 405                 * to be fully awake and then the radio can be enabled.
 406                 */
 407                rt2800usb_set_state(rt2x00dev, STATE_AWAKE);
 408                msleep(1);
 409                retval = rt2800usb_enable_radio(rt2x00dev);
 410                break;
 411        case STATE_RADIO_OFF:
 412                /*
 413                 * After the radio has been disabled, the device should
 414                 * be put to sleep for powersaving.
 415                 */
 416                rt2800usb_disable_radio(rt2x00dev);
 417                rt2800usb_set_state(rt2x00dev, STATE_SLEEP);
 418                break;
 419        case STATE_RADIO_IRQ_ON:
 420        case STATE_RADIO_IRQ_OFF:
 421                /* No support, but no error either */
 422                break;
 423        case STATE_DEEP_SLEEP:
 424        case STATE_SLEEP:
 425        case STATE_STANDBY:
 426        case STATE_AWAKE:
 427                retval = rt2800usb_set_state(rt2x00dev, state);
 428                break;
 429        default:
 430                retval = -ENOTSUPP;
 431                break;
 432        }
 433
 434        if (unlikely(retval))
 435                rt2x00_err(rt2x00dev, "Device failed to enter state %d (%d)\n",
 436                           state, retval);
 437
 438        return retval;
 439}
 440
 441/*
 442 * Watchdog handlers
 443 */
 444static void rt2800usb_watchdog(struct rt2x00_dev *rt2x00dev)
 445{
 446        unsigned int i;
 447        u32 reg;
 448
 449        rt2x00usb_register_read(rt2x00dev, TXRXQ_PCNT, &reg);
 450        if (rt2x00_get_field32(reg, TXRXQ_PCNT_TX0Q)) {
 451                rt2x00_warn(rt2x00dev, "TX HW queue 0 timed out, invoke forced kick\n");
 452
 453                rt2x00usb_register_write(rt2x00dev, PBF_CFG, 0xf40012);
 454
 455                for (i = 0; i < 10; i++) {
 456                        udelay(10);
 457                        if (!rt2x00_get_field32(reg, TXRXQ_PCNT_TX0Q))
 458                                break;
 459                }
 460
 461                rt2x00usb_register_write(rt2x00dev, PBF_CFG, 0xf40006);
 462        }
 463
 464        rt2x00usb_register_read(rt2x00dev, TXRXQ_PCNT, &reg);
 465        if (rt2x00_get_field32(reg, TXRXQ_PCNT_TX1Q)) {
 466                rt2x00_warn(rt2x00dev, "TX HW queue 1 timed out, invoke forced kick\n");
 467
 468                rt2x00usb_register_write(rt2x00dev, PBF_CFG, 0xf4000a);
 469
 470                for (i = 0; i < 10; i++) {
 471                        udelay(10);
 472                        if (!rt2x00_get_field32(reg, TXRXQ_PCNT_TX1Q))
 473                                break;
 474                }
 475
 476                rt2x00usb_register_write(rt2x00dev, PBF_CFG, 0xf40006);
 477        }
 478
 479        rt2x00usb_watchdog(rt2x00dev);
 480}
 481
 482/*
 483 * TX descriptor initialization
 484 */
 485static __le32 *rt2800usb_get_txwi(struct queue_entry *entry)
 486{
 487        if (entry->queue->qid == QID_BEACON)
 488                return (__le32 *) (entry->skb->data);
 489        else
 490                return (__le32 *) (entry->skb->data + TXINFO_DESC_SIZE);
 491}
 492
 493static void rt2800usb_write_tx_desc(struct queue_entry *entry,
 494                                    struct txentry_desc *txdesc)
 495{
 496        struct skb_frame_desc *skbdesc = get_skb_frame_desc(entry->skb);
 497        __le32 *txi = (__le32 *) entry->skb->data;
 498        u32 word;
 499
 500        /*
 501         * Initialize TXINFO descriptor
 502         */
 503        rt2x00_desc_read(txi, 0, &word);
 504
 505        /*
 506         * The size of TXINFO_W0_USB_DMA_TX_PKT_LEN is
 507         * TXWI + 802.11 header + L2 pad + payload + pad,
 508         * so need to decrease size of TXINFO.
 509         */
 510        rt2x00_set_field32(&word, TXINFO_W0_USB_DMA_TX_PKT_LEN,
 511                           roundup(entry->skb->len, 4) - TXINFO_DESC_SIZE);
 512        rt2x00_set_field32(&word, TXINFO_W0_WIV,
 513                           !test_bit(ENTRY_TXD_ENCRYPT_IV, &txdesc->flags));
 514        rt2x00_set_field32(&word, TXINFO_W0_QSEL, 2);
 515        rt2x00_set_field32(&word, TXINFO_W0_SW_USE_LAST_ROUND, 0);
 516        rt2x00_set_field32(&word, TXINFO_W0_USB_DMA_NEXT_VALID, 0);
 517        rt2x00_set_field32(&word, TXINFO_W0_USB_DMA_TX_BURST,
 518                           test_bit(ENTRY_TXD_BURST, &txdesc->flags));
 519        rt2x00_desc_write(txi, 0, word);
 520
 521        /*
 522         * Register descriptor details in skb frame descriptor.
 523         */
 524        skbdesc->flags |= SKBDESC_DESC_IN_SKB;
 525        skbdesc->desc = txi;
 526        skbdesc->desc_len = TXINFO_DESC_SIZE + entry->queue->winfo_size;
 527}
 528
 529/*
 530 * TX data initialization
 531 */
 532static int rt2800usb_get_tx_data_len(struct queue_entry *entry)
 533{
 534        /*
 535         * pad(1~3 bytes) is needed after each 802.11 payload.
 536         * USB end pad(4 bytes) is needed at each USB bulk out packet end.
 537         * TX frame format is :
 538         * | TXINFO | TXWI | 802.11 header | L2 pad | payload | pad | USB end pad |
 539         *                 |<------------- tx_pkt_len ------------->|
 540         */
 541
 542        return roundup(entry->skb->len, 4) + 4;
 543}
 544
 545/*
 546 * TX control handlers
 547 */
 548static enum txdone_entry_desc_flags
 549rt2800usb_txdone_entry_check(struct queue_entry *entry, u32 reg)
 550{
 551        __le32 *txwi;
 552        u32 word;
 553        int wcid, ack, pid;
 554        int tx_wcid, tx_ack, tx_pid, is_agg;
 555
 556        /*
 557         * This frames has returned with an IO error,
 558         * so the status report is not intended for this
 559         * frame.
 560         */
 561        if (test_bit(ENTRY_DATA_IO_FAILED, &entry->flags))
 562                return TXDONE_FAILURE;
 563
 564        wcid    = rt2x00_get_field32(reg, TX_STA_FIFO_WCID);
 565        ack     = rt2x00_get_field32(reg, TX_STA_FIFO_TX_ACK_REQUIRED);
 566        pid     = rt2x00_get_field32(reg, TX_STA_FIFO_PID_TYPE);
 567        is_agg  = rt2x00_get_field32(reg, TX_STA_FIFO_TX_AGGRE);
 568
 569        /*
 570         * Validate if this TX status report is intended for
 571         * this entry by comparing the WCID/ACK/PID fields.
 572         */
 573        txwi = rt2800usb_get_txwi(entry);
 574
 575        rt2x00_desc_read(txwi, 1, &word);
 576        tx_wcid = rt2x00_get_field32(word, TXWI_W1_WIRELESS_CLI_ID);
 577        tx_ack  = rt2x00_get_field32(word, TXWI_W1_ACK);
 578        tx_pid  = rt2x00_get_field32(word, TXWI_W1_PACKETID);
 579
 580        if (wcid != tx_wcid || ack != tx_ack || (!is_agg && pid != tx_pid)) {
 581                rt2x00_dbg(entry->queue->rt2x00dev,
 582                           "TX status report missed for queue %d entry %d\n",
 583                           entry->queue->qid, entry->entry_idx);
 584                return TXDONE_UNKNOWN;
 585        }
 586
 587        return TXDONE_SUCCESS;
 588}
 589
 590static void rt2800usb_txdone(struct rt2x00_dev *rt2x00dev)
 591{
 592        struct data_queue *queue;
 593        struct queue_entry *entry;
 594        u32 reg;
 595        u8 qid;
 596        enum txdone_entry_desc_flags done_status;
 597
 598        while (kfifo_get(&rt2x00dev->txstatus_fifo, &reg)) {
 599                /*
 600                 * TX_STA_FIFO_PID_QUEUE is a 2-bit field, thus qid is
 601                 * guaranteed to be one of the TX QIDs .
 602                 */
 603                qid = rt2x00_get_field32(reg, TX_STA_FIFO_PID_QUEUE);
 604                queue = rt2x00queue_get_tx_queue(rt2x00dev, qid);
 605
 606                if (unlikely(rt2x00queue_empty(queue))) {
 607                        rt2x00_dbg(rt2x00dev, "Got TX status for an empty queue %u, dropping\n",
 608                                   qid);
 609                        break;
 610                }
 611
 612                entry = rt2x00queue_get_entry(queue, Q_INDEX_DONE);
 613
 614                if (unlikely(test_bit(ENTRY_OWNER_DEVICE_DATA, &entry->flags) ||
 615                             !test_bit(ENTRY_DATA_STATUS_PENDING, &entry->flags))) {
 616                        rt2x00_warn(rt2x00dev, "Data pending for entry %u in queue %u\n",
 617                                    entry->entry_idx, qid);
 618                        break;
 619                }
 620
 621                done_status = rt2800usb_txdone_entry_check(entry, reg);
 622                if (likely(done_status == TXDONE_SUCCESS))
 623                        rt2800_txdone_entry(entry, reg, rt2800usb_get_txwi(entry));
 624                else
 625                        rt2x00lib_txdone_noinfo(entry, done_status);
 626        }
 627}
 628
 629static void rt2800usb_txdone_nostatus(struct rt2x00_dev *rt2x00dev)
 630{
 631        struct data_queue *queue;
 632        struct queue_entry *entry;
 633
 634        /*
 635         * Process any trailing TX status reports for IO failures,
 636         * we loop until we find the first non-IO error entry. This
 637         * can either be a frame which is free, is being uploaded,
 638         * or has completed the upload but didn't have an entry
 639         * in the TX_STAT_FIFO register yet.
 640         */
 641        tx_queue_for_each(rt2x00dev, queue) {
 642                while (!rt2x00queue_empty(queue)) {
 643                        entry = rt2x00queue_get_entry(queue, Q_INDEX_DONE);
 644
 645                        if (test_bit(ENTRY_OWNER_DEVICE_DATA, &entry->flags) ||
 646                            !test_bit(ENTRY_DATA_STATUS_PENDING, &entry->flags))
 647                                break;
 648
 649                        if (test_bit(ENTRY_DATA_IO_FAILED, &entry->flags))
 650                                rt2x00lib_txdone_noinfo(entry, TXDONE_FAILURE);
 651                        else if (rt2800usb_entry_txstatus_timeout(entry))
 652                                rt2x00lib_txdone_noinfo(entry, TXDONE_UNKNOWN);
 653                        else
 654                                break;
 655                }
 656        }
 657}
 658
 659static void rt2800usb_work_txdone(struct work_struct *work)
 660{
 661        struct rt2x00_dev *rt2x00dev =
 662            container_of(work, struct rt2x00_dev, txdone_work);
 663
 664        while (!kfifo_is_empty(&rt2x00dev->txstatus_fifo) ||
 665               rt2800usb_txstatus_timeout(rt2x00dev)) {
 666
 667                rt2800usb_txdone(rt2x00dev);
 668
 669                rt2800usb_txdone_nostatus(rt2x00dev);
 670
 671                /*
 672                 * The hw may delay sending the packet after DMA complete
 673                 * if the medium is busy, thus the TX_STA_FIFO entry is
 674                 * also delayed -> use a timer to retrieve it.
 675                 */
 676                if (rt2800usb_txstatus_pending(rt2x00dev))
 677                        rt2800usb_async_read_tx_status(rt2x00dev);
 678        }
 679}
 680
 681/*
 682 * RX control handlers
 683 */
 684static void rt2800usb_fill_rxdone(struct queue_entry *entry,
 685                                  struct rxdone_entry_desc *rxdesc)
 686{
 687        struct skb_frame_desc *skbdesc = get_skb_frame_desc(entry->skb);
 688        __le32 *rxi = (__le32 *)entry->skb->data;
 689        __le32 *rxd;
 690        u32 word;
 691        int rx_pkt_len;
 692
 693        /*
 694         * Copy descriptor to the skbdesc->desc buffer, making it safe from
 695         * moving of frame data in rt2x00usb.
 696         */
 697        memcpy(skbdesc->desc, rxi, skbdesc->desc_len);
 698
 699        /*
 700         * RX frame format is :
 701         * | RXINFO | RXWI | header | L2 pad | payload | pad | RXD | USB pad |
 702         *          |<------------ rx_pkt_len -------------->|
 703         */
 704        rt2x00_desc_read(rxi, 0, &word);
 705        rx_pkt_len = rt2x00_get_field32(word, RXINFO_W0_USB_DMA_RX_PKT_LEN);
 706
 707        /*
 708         * Remove the RXINFO structure from the sbk.
 709         */
 710        skb_pull(entry->skb, RXINFO_DESC_SIZE);
 711
 712        /*
 713         * Check for rx_pkt_len validity. Return if invalid, leaving
 714         * rxdesc->size zeroed out by the upper level.
 715         */
 716        if (unlikely(rx_pkt_len == 0 ||
 717                        rx_pkt_len > entry->queue->data_size)) {
 718                rt2x00_err(entry->queue->rt2x00dev,
 719                           "Bad frame size %d, forcing to 0\n", rx_pkt_len);
 720                return;
 721        }
 722
 723        rxd = (__le32 *)(entry->skb->data + rx_pkt_len);
 724
 725        /*
 726         * It is now safe to read the descriptor on all architectures.
 727         */
 728        rt2x00_desc_read(rxd, 0, &word);
 729
 730        if (rt2x00_get_field32(word, RXD_W0_CRC_ERROR))
 731                rxdesc->flags |= RX_FLAG_FAILED_FCS_CRC;
 732
 733        rxdesc->cipher_status = rt2x00_get_field32(word, RXD_W0_CIPHER_ERROR);
 734
 735        if (rt2x00_get_field32(word, RXD_W0_DECRYPTED)) {
 736                /*
 737                 * Hardware has stripped IV/EIV data from 802.11 frame during
 738                 * decryption. Unfortunately the descriptor doesn't contain
 739                 * any fields with the EIV/IV data either, so they can't
 740                 * be restored by rt2x00lib.
 741                 */
 742                rxdesc->flags |= RX_FLAG_IV_STRIPPED;
 743
 744                /*
 745                 * The hardware has already checked the Michael Mic and has
 746                 * stripped it from the frame. Signal this to mac80211.
 747                 */
 748                rxdesc->flags |= RX_FLAG_MMIC_STRIPPED;
 749
 750                if (rxdesc->cipher_status == RX_CRYPTO_SUCCESS)
 751                        rxdesc->flags |= RX_FLAG_DECRYPTED;
 752                else if (rxdesc->cipher_status == RX_CRYPTO_FAIL_MIC)
 753                        rxdesc->flags |= RX_FLAG_MMIC_ERROR;
 754        }
 755
 756        if (rt2x00_get_field32(word, RXD_W0_MY_BSS))
 757                rxdesc->dev_flags |= RXDONE_MY_BSS;
 758
 759        if (rt2x00_get_field32(word, RXD_W0_L2PAD))
 760                rxdesc->dev_flags |= RXDONE_L2PAD;
 761
 762        /*
 763         * Remove RXD descriptor from end of buffer.
 764         */
 765        skb_trim(entry->skb, rx_pkt_len);
 766
 767        /*
 768         * Process the RXWI structure.
 769         */
 770        rt2800_process_rxwi(entry, rxdesc);
 771}
 772
 773/*
 774 * Device probe functions.
 775 */
 776static int rt2800usb_efuse_detect(struct rt2x00_dev *rt2x00dev)
 777{
 778        int retval;
 779
 780        retval = rt2800usb_autorun_detect(rt2x00dev);
 781        if (retval < 0)
 782                return retval;
 783        if (retval)
 784                return 1;
 785        return rt2800_efuse_detect(rt2x00dev);
 786}
 787
 788static int rt2800usb_read_eeprom(struct rt2x00_dev *rt2x00dev)
 789{
 790        int retval;
 791
 792        retval = rt2800usb_efuse_detect(rt2x00dev);
 793        if (retval < 0)
 794                return retval;
 795        if (retval)
 796                retval = rt2800_read_eeprom_efuse(rt2x00dev);
 797        else
 798                retval = rt2x00usb_eeprom_read(rt2x00dev, rt2x00dev->eeprom,
 799                                               EEPROM_SIZE);
 800
 801        return retval;
 802}
 803
 804static int rt2800usb_probe_hw(struct rt2x00_dev *rt2x00dev)
 805{
 806        int retval;
 807
 808        retval = rt2800_probe_hw(rt2x00dev);
 809        if (retval)
 810                return retval;
 811
 812        /*
 813         * Set txstatus timer function.
 814         */
 815        rt2x00dev->txstatus_timer.function = rt2800usb_tx_sta_fifo_timeout;
 816
 817        /*
 818         * Overwrite TX done handler
 819         */
 820        INIT_WORK(&rt2x00dev->txdone_work, rt2800usb_work_txdone);
 821
 822        return 0;
 823}
 824
 825static const struct ieee80211_ops rt2800usb_mac80211_ops = {
 826        .tx                     = rt2x00mac_tx,
 827        .start                  = rt2x00mac_start,
 828        .stop                   = rt2x00mac_stop,
 829        .add_interface          = rt2x00mac_add_interface,
 830        .remove_interface       = rt2x00mac_remove_interface,
 831        .config                 = rt2x00mac_config,
 832        .configure_filter       = rt2x00mac_configure_filter,
 833        .set_tim                = rt2x00mac_set_tim,
 834        .set_key                = rt2x00mac_set_key,
 835        .sw_scan_start          = rt2x00mac_sw_scan_start,
 836        .sw_scan_complete       = rt2x00mac_sw_scan_complete,
 837        .get_stats              = rt2x00mac_get_stats,
 838        .get_key_seq            = rt2800_get_key_seq,
 839        .set_rts_threshold      = rt2800_set_rts_threshold,
 840        .sta_add                = rt2x00mac_sta_add,
 841        .sta_remove             = rt2x00mac_sta_remove,
 842        .bss_info_changed       = rt2x00mac_bss_info_changed,
 843        .conf_tx                = rt2800_conf_tx,
 844        .get_tsf                = rt2800_get_tsf,
 845        .rfkill_poll            = rt2x00mac_rfkill_poll,
 846        .ampdu_action           = rt2800_ampdu_action,
 847        .flush                  = rt2x00mac_flush,
 848        .get_survey             = rt2800_get_survey,
 849        .get_ringparam          = rt2x00mac_get_ringparam,
 850        .tx_frames_pending      = rt2x00mac_tx_frames_pending,
 851};
 852
 853static const struct rt2800_ops rt2800usb_rt2800_ops = {
 854        .register_read          = rt2x00usb_register_read,
 855        .register_read_lock     = rt2x00usb_register_read_lock,
 856        .register_write         = rt2x00usb_register_write,
 857        .register_write_lock    = rt2x00usb_register_write_lock,
 858        .register_multiread     = rt2x00usb_register_multiread,
 859        .register_multiwrite    = rt2x00usb_register_multiwrite,
 860        .regbusy_read           = rt2x00usb_regbusy_read,
 861        .read_eeprom            = rt2800usb_read_eeprom,
 862        .hwcrypt_disabled       = rt2800usb_hwcrypt_disabled,
 863        .drv_write_firmware     = rt2800usb_write_firmware,
 864        .drv_init_registers     = rt2800usb_init_registers,
 865        .drv_get_txwi           = rt2800usb_get_txwi,
 866};
 867
 868static const struct rt2x00lib_ops rt2800usb_rt2x00_ops = {
 869        .probe_hw               = rt2800usb_probe_hw,
 870        .get_firmware_name      = rt2800usb_get_firmware_name,
 871        .check_firmware         = rt2800_check_firmware,
 872        .load_firmware          = rt2800_load_firmware,
 873        .initialize             = rt2x00usb_initialize,
 874        .uninitialize           = rt2x00usb_uninitialize,
 875        .clear_entry            = rt2x00usb_clear_entry,
 876        .set_device_state       = rt2800usb_set_device_state,
 877        .rfkill_poll            = rt2800_rfkill_poll,
 878        .link_stats             = rt2800_link_stats,
 879        .reset_tuner            = rt2800_reset_tuner,
 880        .link_tuner             = rt2800_link_tuner,
 881        .gain_calibration       = rt2800_gain_calibration,
 882        .vco_calibration        = rt2800_vco_calibration,
 883        .watchdog               = rt2800usb_watchdog,
 884        .start_queue            = rt2800usb_start_queue,
 885        .kick_queue             = rt2x00usb_kick_queue,
 886        .stop_queue             = rt2800usb_stop_queue,
 887        .flush_queue            = rt2x00usb_flush_queue,
 888        .tx_dma_done            = rt2800usb_tx_dma_done,
 889        .write_tx_desc          = rt2800usb_write_tx_desc,
 890        .write_tx_data          = rt2800_write_tx_data,
 891        .write_beacon           = rt2800_write_beacon,
 892        .clear_beacon           = rt2800_clear_beacon,
 893        .get_tx_data_len        = rt2800usb_get_tx_data_len,
 894        .fill_rxdone            = rt2800usb_fill_rxdone,
 895        .config_shared_key      = rt2800_config_shared_key,
 896        .config_pairwise_key    = rt2800_config_pairwise_key,
 897        .config_filter          = rt2800_config_filter,
 898        .config_intf            = rt2800_config_intf,
 899        .config_erp             = rt2800_config_erp,
 900        .config_ant             = rt2800_config_ant,
 901        .config                 = rt2800_config,
 902        .sta_add                = rt2800_sta_add,
 903        .sta_remove             = rt2800_sta_remove,
 904};
 905
 906static void rt2800usb_queue_init(struct data_queue *queue)
 907{
 908        struct rt2x00_dev *rt2x00dev = queue->rt2x00dev;
 909        unsigned short txwi_size, rxwi_size;
 910
 911        rt2800_get_txwi_rxwi_size(rt2x00dev, &txwi_size, &rxwi_size);
 912
 913        switch (queue->qid) {
 914        case QID_RX:
 915                queue->limit = 128;
 916                queue->data_size = AGGREGATION_SIZE;
 917                queue->desc_size = RXINFO_DESC_SIZE;
 918                queue->winfo_size = rxwi_size;
 919                queue->priv_size = sizeof(struct queue_entry_priv_usb);
 920                break;
 921
 922        case QID_AC_VO:
 923        case QID_AC_VI:
 924        case QID_AC_BE:
 925        case QID_AC_BK:
 926                queue->limit = 16;
 927                queue->data_size = AGGREGATION_SIZE;
 928                queue->desc_size = TXINFO_DESC_SIZE;
 929                queue->winfo_size = txwi_size;
 930                queue->priv_size = sizeof(struct queue_entry_priv_usb);
 931                break;
 932
 933        case QID_BEACON:
 934                queue->limit = 8;
 935                queue->data_size = MGMT_FRAME_SIZE;
 936                queue->desc_size = TXINFO_DESC_SIZE;
 937                queue->winfo_size = txwi_size;
 938                queue->priv_size = sizeof(struct queue_entry_priv_usb);
 939                break;
 940
 941        case QID_ATIM:
 942                /* fallthrough */
 943        default:
 944                BUG();
 945                break;
 946        }
 947}
 948
 949static const struct rt2x00_ops rt2800usb_ops = {
 950        .name                   = KBUILD_MODNAME,
 951        .drv_data_size          = sizeof(struct rt2800_drv_data),
 952        .max_ap_intf            = 8,
 953        .eeprom_size            = EEPROM_SIZE,
 954        .rf_size                = RF_SIZE,
 955        .tx_queues              = NUM_TX_QUEUES,
 956        .queue_init             = rt2800usb_queue_init,
 957        .lib                    = &rt2800usb_rt2x00_ops,
 958        .drv                    = &rt2800usb_rt2800_ops,
 959        .hw                     = &rt2800usb_mac80211_ops,
 960#ifdef CONFIG_RT2X00_LIB_DEBUGFS
 961        .debugfs                = &rt2800_rt2x00debug,
 962#endif /* CONFIG_RT2X00_LIB_DEBUGFS */
 963};
 964
 965/*
 966 * rt2800usb module information.
 967 */
 968static struct usb_device_id rt2800usb_device_table[] = {
 969        /* Abocom */
 970        { USB_DEVICE(0x07b8, 0x2870) },
 971        { USB_DEVICE(0x07b8, 0x2770) },
 972        { USB_DEVICE(0x07b8, 0x3070) },
 973        { USB_DEVICE(0x07b8, 0x3071) },
 974        { USB_DEVICE(0x07b8, 0x3072) },
 975        { USB_DEVICE(0x1482, 0x3c09) },
 976        /* AirTies */
 977        { USB_DEVICE(0x1eda, 0x2012) },
 978        { USB_DEVICE(0x1eda, 0x2210) },
 979        { USB_DEVICE(0x1eda, 0x2310) },
 980        /* Allwin */
 981        { USB_DEVICE(0x8516, 0x2070) },
 982        { USB_DEVICE(0x8516, 0x2770) },
 983        { USB_DEVICE(0x8516, 0x2870) },
 984        { USB_DEVICE(0x8516, 0x3070) },
 985        { USB_DEVICE(0x8516, 0x3071) },
 986        { USB_DEVICE(0x8516, 0x3072) },
 987        /* Alpha Networks */
 988        { USB_DEVICE(0x14b2, 0x3c06) },
 989        { USB_DEVICE(0x14b2, 0x3c07) },
 990        { USB_DEVICE(0x14b2, 0x3c09) },
 991        { USB_DEVICE(0x14b2, 0x3c12) },
 992        { USB_DEVICE(0x14b2, 0x3c23) },
 993        { USB_DEVICE(0x14b2, 0x3c25) },
 994        { USB_DEVICE(0x14b2, 0x3c27) },
 995        { USB_DEVICE(0x14b2, 0x3c28) },
 996        { USB_DEVICE(0x14b2, 0x3c2c) },
 997        /* Amit */
 998        { USB_DEVICE(0x15c5, 0x0008) },
 999        /* Askey */
1000        { USB_DEVICE(0x1690, 0x0740) },
1001        /* ASUS */
1002        { USB_DEVICE(0x0b05, 0x1731) },
1003        { USB_DEVICE(0x0b05, 0x1732) },
1004        { USB_DEVICE(0x0b05, 0x1742) },
1005        { USB_DEVICE(0x0b05, 0x1784) },
1006        { USB_DEVICE(0x1761, 0x0b05) },
1007        /* AzureWave */
1008        { USB_DEVICE(0x13d3, 0x3247) },
1009        { USB_DEVICE(0x13d3, 0x3273) },
1010        { USB_DEVICE(0x13d3, 0x3305) },
1011        { USB_DEVICE(0x13d3, 0x3307) },
1012        { USB_DEVICE(0x13d3, 0x3321) },
1013        /* Belkin */
1014        { USB_DEVICE(0x050d, 0x8053) },
1015        { USB_DEVICE(0x050d, 0x805c) },
1016        { USB_DEVICE(0x050d, 0x815c) },
1017        { USB_DEVICE(0x050d, 0x825a) },
1018        { USB_DEVICE(0x050d, 0x825b) },
1019        { USB_DEVICE(0x050d, 0x935a) },
1020        { USB_DEVICE(0x050d, 0x935b) },
1021        /* Buffalo */
1022        { USB_DEVICE(0x0411, 0x00e8) },
1023        { USB_DEVICE(0x0411, 0x0158) },
1024        { USB_DEVICE(0x0411, 0x015d) },
1025        { USB_DEVICE(0x0411, 0x016f) },
1026        { USB_DEVICE(0x0411, 0x01a2) },
1027        { USB_DEVICE(0x0411, 0x01ee) },
1028        { USB_DEVICE(0x0411, 0x01a8) },
1029        { USB_DEVICE(0x0411, 0x01fd) },
1030        /* Corega */
1031        { USB_DEVICE(0x07aa, 0x002f) },
1032        { USB_DEVICE(0x07aa, 0x003c) },
1033        { USB_DEVICE(0x07aa, 0x003f) },
1034        { USB_DEVICE(0x18c5, 0x0012) },
1035        /* D-Link */
1036        { USB_DEVICE(0x07d1, 0x3c09) },
1037        { USB_DEVICE(0x07d1, 0x3c0a) },
1038        { USB_DEVICE(0x07d1, 0x3c0d) },
1039        { USB_DEVICE(0x07d1, 0x3c0e) },
1040        { USB_DEVICE(0x07d1, 0x3c0f) },
1041        { USB_DEVICE(0x07d1, 0x3c11) },
1042        { USB_DEVICE(0x07d1, 0x3c13) },
1043        { USB_DEVICE(0x07d1, 0x3c15) },
1044        { USB_DEVICE(0x07d1, 0x3c16) },
1045        { USB_DEVICE(0x07d1, 0x3c17) },
1046        { USB_DEVICE(0x2001, 0x3317) },
1047        { USB_DEVICE(0x2001, 0x3c1b) },
1048        { USB_DEVICE(0x2001, 0x3c25) },
1049        /* Draytek */
1050        { USB_DEVICE(0x07fa, 0x7712) },
1051        /* DVICO */
1052        { USB_DEVICE(0x0fe9, 0xb307) },
1053        /* Edimax */
1054        { USB_DEVICE(0x7392, 0x4085) },
1055        { USB_DEVICE(0x7392, 0x7711) },
1056        { USB_DEVICE(0x7392, 0x7717) },
1057        { USB_DEVICE(0x7392, 0x7718) },
1058        { USB_DEVICE(0x7392, 0x7722) },
1059        /* Encore */
1060        { USB_DEVICE(0x203d, 0x1480) },
1061        { USB_DEVICE(0x203d, 0x14a9) },
1062        /* EnGenius */
1063        { USB_DEVICE(0x1740, 0x9701) },
1064        { USB_DEVICE(0x1740, 0x9702) },
1065        { USB_DEVICE(0x1740, 0x9703) },
1066        { USB_DEVICE(0x1740, 0x9705) },
1067        { USB_DEVICE(0x1740, 0x9706) },
1068        { USB_DEVICE(0x1740, 0x9707) },
1069        { USB_DEVICE(0x1740, 0x9708) },
1070        { USB_DEVICE(0x1740, 0x9709) },
1071        /* Gemtek */
1072        { USB_DEVICE(0x15a9, 0x0012) },
1073        /* Gigabyte */
1074        { USB_DEVICE(0x1044, 0x800b) },
1075        { USB_DEVICE(0x1044, 0x800d) },
1076        /* Hawking */
1077        { USB_DEVICE(0x0e66, 0x0001) },
1078        { USB_DEVICE(0x0e66, 0x0003) },
1079        { USB_DEVICE(0x0e66, 0x0009) },
1080        { USB_DEVICE(0x0e66, 0x000b) },
1081        { USB_DEVICE(0x0e66, 0x0013) },
1082        { USB_DEVICE(0x0e66, 0x0017) },
1083        { USB_DEVICE(0x0e66, 0x0018) },
1084        /* I-O DATA */
1085        { USB_DEVICE(0x04bb, 0x0945) },
1086        { USB_DEVICE(0x04bb, 0x0947) },
1087        { USB_DEVICE(0x04bb, 0x0948) },
1088        /* Linksys */
1089        { USB_DEVICE(0x13b1, 0x0031) },
1090        { USB_DEVICE(0x1737, 0x0070) },
1091        { USB_DEVICE(0x1737, 0x0071) },
1092        { USB_DEVICE(0x1737, 0x0077) },
1093        { USB_DEVICE(0x1737, 0x0078) },
1094        /* Logitec */
1095        { USB_DEVICE(0x0789, 0x0162) },
1096        { USB_DEVICE(0x0789, 0x0163) },
1097        { USB_DEVICE(0x0789, 0x0164) },
1098        { USB_DEVICE(0x0789, 0x0166) },
1099        /* Motorola */
1100        { USB_DEVICE(0x100d, 0x9031) },
1101        /* MSI */
1102        { USB_DEVICE(0x0db0, 0x3820) },
1103        { USB_DEVICE(0x0db0, 0x3821) },
1104        { USB_DEVICE(0x0db0, 0x3822) },
1105        { USB_DEVICE(0x0db0, 0x3870) },
1106        { USB_DEVICE(0x0db0, 0x3871) },
1107        { USB_DEVICE(0x0db0, 0x6899) },
1108        { USB_DEVICE(0x0db0, 0x821a) },
1109        { USB_DEVICE(0x0db0, 0x822a) },
1110        { USB_DEVICE(0x0db0, 0x822b) },
1111        { USB_DEVICE(0x0db0, 0x822c) },
1112        { USB_DEVICE(0x0db0, 0x870a) },
1113        { USB_DEVICE(0x0db0, 0x871a) },
1114        { USB_DEVICE(0x0db0, 0x871b) },
1115        { USB_DEVICE(0x0db0, 0x871c) },
1116        { USB_DEVICE(0x0db0, 0x899a) },
1117        /* Ovislink */
1118        { USB_DEVICE(0x1b75, 0x3070) },
1119        { USB_DEVICE(0x1b75, 0x3071) },
1120        { USB_DEVICE(0x1b75, 0x3072) },
1121        { USB_DEVICE(0x1b75, 0xa200) },
1122        /* Para */
1123        { USB_DEVICE(0x20b8, 0x8888) },
1124        /* Pegatron */
1125        { USB_DEVICE(0x1d4d, 0x0002) },
1126        { USB_DEVICE(0x1d4d, 0x000c) },
1127        { USB_DEVICE(0x1d4d, 0x000e) },
1128        { USB_DEVICE(0x1d4d, 0x0011) },
1129        /* Philips */
1130        { USB_DEVICE(0x0471, 0x200f) },
1131        /* Planex */
1132        { USB_DEVICE(0x2019, 0x5201) },
1133        { USB_DEVICE(0x2019, 0xab25) },
1134        { USB_DEVICE(0x2019, 0xed06) },
1135        /* Quanta */
1136        { USB_DEVICE(0x1a32, 0x0304) },
1137        /* Ralink */
1138        { USB_DEVICE(0x148f, 0x2070) },
1139        { USB_DEVICE(0x148f, 0x2770) },
1140        { USB_DEVICE(0x148f, 0x2870) },
1141        { USB_DEVICE(0x148f, 0x3070) },
1142        { USB_DEVICE(0x148f, 0x3071) },
1143        { USB_DEVICE(0x148f, 0x3072) },
1144        /* Samsung */
1145        { USB_DEVICE(0x04e8, 0x2018) },
1146        /* Siemens */
1147        { USB_DEVICE(0x129b, 0x1828) },
1148        /* Sitecom */
1149        { USB_DEVICE(0x0df6, 0x0017) },
1150        { USB_DEVICE(0x0df6, 0x002b) },
1151        { USB_DEVICE(0x0df6, 0x002c) },
1152        { USB_DEVICE(0x0df6, 0x002d) },
1153        { USB_DEVICE(0x0df6, 0x0039) },
1154        { USB_DEVICE(0x0df6, 0x003b) },
1155        { USB_DEVICE(0x0df6, 0x003d) },
1156        { USB_DEVICE(0x0df6, 0x003e) },
1157        { USB_DEVICE(0x0df6, 0x003f) },
1158        { USB_DEVICE(0x0df6, 0x0040) },
1159        { USB_DEVICE(0x0df6, 0x0042) },
1160        { USB_DEVICE(0x0df6, 0x0047) },
1161        { USB_DEVICE(0x0df6, 0x0048) },
1162        { USB_DEVICE(0x0df6, 0x0051) },
1163        { USB_DEVICE(0x0df6, 0x005f) },
1164        { USB_DEVICE(0x0df6, 0x0060) },
1165        /* SMC */
1166        { USB_DEVICE(0x083a, 0x6618) },
1167        { USB_DEVICE(0x083a, 0x7511) },
1168        { USB_DEVICE(0x083a, 0x7512) },
1169        { USB_DEVICE(0x083a, 0x7522) },
1170        { USB_DEVICE(0x083a, 0x8522) },
1171        { USB_DEVICE(0x083a, 0xa618) },
1172        { USB_DEVICE(0x083a, 0xa701) },
1173        { USB_DEVICE(0x083a, 0xa702) },
1174        { USB_DEVICE(0x083a, 0xa703) },
1175        { USB_DEVICE(0x083a, 0xb522) },
1176        /* Sparklan */
1177        { USB_DEVICE(0x15a9, 0x0006) },
1178        /* Sweex */
1179        { USB_DEVICE(0x177f, 0x0153) },
1180        { USB_DEVICE(0x177f, 0x0164) },
1181        { USB_DEVICE(0x177f, 0x0302) },
1182        { USB_DEVICE(0x177f, 0x0313) },
1183        { USB_DEVICE(0x177f, 0x0323) },
1184        { USB_DEVICE(0x177f, 0x0324) },
1185        /* U-Media */
1186        { USB_DEVICE(0x157e, 0x300e) },
1187        { USB_DEVICE(0x157e, 0x3013) },
1188        /* ZCOM */
1189        { USB_DEVICE(0x0cde, 0x0022) },
1190        { USB_DEVICE(0x0cde, 0x0025) },
1191        /* Zinwell */
1192        { USB_DEVICE(0x5a57, 0x0280) },
1193        { USB_DEVICE(0x5a57, 0x0282) },
1194        { USB_DEVICE(0x5a57, 0x0283) },
1195        { USB_DEVICE(0x5a57, 0x5257) },
1196        /* Zyxel */
1197        { USB_DEVICE(0x0586, 0x3416) },
1198        { USB_DEVICE(0x0586, 0x3418) },
1199        { USB_DEVICE(0x0586, 0x341a) },
1200        { USB_DEVICE(0x0586, 0x341e) },
1201        { USB_DEVICE(0x0586, 0x343e) },
1202#ifdef CONFIG_RT2800USB_RT33XX
1203        /* Belkin */
1204        { USB_DEVICE(0x050d, 0x945b) },
1205        /* D-Link */
1206        { USB_DEVICE(0x2001, 0x3c17) },
1207        /* Panasonic */
1208        { USB_DEVICE(0x083a, 0xb511) },
1209        /* Philips */
1210        { USB_DEVICE(0x0471, 0x20dd) },
1211        /* Ralink */
1212        { USB_DEVICE(0x148f, 0x3370) },
1213        { USB_DEVICE(0x148f, 0x8070) },
1214        /* Sitecom */
1215        { USB_DEVICE(0x0df6, 0x0050) },
1216        /* Sweex */
1217        { USB_DEVICE(0x177f, 0x0163) },
1218        { USB_DEVICE(0x177f, 0x0165) },
1219#endif
1220#ifdef CONFIG_RT2800USB_RT35XX
1221        /* Allwin */
1222        { USB_DEVICE(0x8516, 0x3572) },
1223        /* Askey */
1224        { USB_DEVICE(0x1690, 0x0744) },
1225        { USB_DEVICE(0x1690, 0x0761) },
1226        { USB_DEVICE(0x1690, 0x0764) },
1227        /* ASUS */
1228        { USB_DEVICE(0x0b05, 0x179d) },
1229        /* Cisco */
1230        { USB_DEVICE(0x167b, 0x4001) },
1231        /* EnGenius */
1232        { USB_DEVICE(0x1740, 0x9801) },
1233        /* I-O DATA */
1234        { USB_DEVICE(0x04bb, 0x0944) },
1235        /* Linksys */
1236        { USB_DEVICE(0x13b1, 0x002f) },
1237        { USB_DEVICE(0x1737, 0x0079) },
1238        /* Logitec */
1239        { USB_DEVICE(0x0789, 0x0170) },
1240        /* Ralink */
1241        { USB_DEVICE(0x148f, 0x3572) },
1242        /* Sitecom */
1243        { USB_DEVICE(0x0df6, 0x0041) },
1244        { USB_DEVICE(0x0df6, 0x0062) },
1245        { USB_DEVICE(0x0df6, 0x0065) },
1246        { USB_DEVICE(0x0df6, 0x0066) },
1247        { USB_DEVICE(0x0df6, 0x0068) },
1248        /* Toshiba */
1249        { USB_DEVICE(0x0930, 0x0a07) },
1250        /* Zinwell */
1251        { USB_DEVICE(0x5a57, 0x0284) },
1252#endif
1253#ifdef CONFIG_RT2800USB_RT3573
1254        /* AirLive */
1255        { USB_DEVICE(0x1b75, 0x7733) },
1256        /* ASUS */
1257        { USB_DEVICE(0x0b05, 0x17bc) },
1258        { USB_DEVICE(0x0b05, 0x17ad) },
1259        /* Belkin */
1260        { USB_DEVICE(0x050d, 0x1103) },
1261        /* Cameo */
1262        { USB_DEVICE(0x148f, 0xf301) },
1263        /* D-Link */
1264        { USB_DEVICE(0x2001, 0x3c1f) },
1265        /* Edimax */
1266        { USB_DEVICE(0x7392, 0x7733) },
1267        /* Hawking */
1268        { USB_DEVICE(0x0e66, 0x0020) },
1269        { USB_DEVICE(0x0e66, 0x0021) },
1270        /* I-O DATA */
1271        { USB_DEVICE(0x04bb, 0x094e) },
1272        /* Linksys */
1273        { USB_DEVICE(0x13b1, 0x003b) },
1274        /* Logitec */
1275        { USB_DEVICE(0x0789, 0x016b) },
1276        /* NETGEAR */
1277        { USB_DEVICE(0x0846, 0x9012) },
1278        { USB_DEVICE(0x0846, 0x9013) },
1279        { USB_DEVICE(0x0846, 0x9019) },
1280        /* Planex */
1281        { USB_DEVICE(0x2019, 0xed19) },
1282        /* Ralink */
1283        { USB_DEVICE(0x148f, 0x3573) },
1284        /* Sitecom */
1285        { USB_DEVICE(0x0df6, 0x0067) },
1286        { USB_DEVICE(0x0df6, 0x006a) },
1287        { USB_DEVICE(0x0df6, 0x006e) },
1288        /* ZyXEL */
1289        { USB_DEVICE(0x0586, 0x3421) },
1290#endif
1291#ifdef CONFIG_RT2800USB_RT53XX
1292        /* Arcadyan */
1293        { USB_DEVICE(0x043e, 0x7a12) },
1294        { USB_DEVICE(0x043e, 0x7a32) },
1295        /* ASUS */
1296        { USB_DEVICE(0x0b05, 0x17e8) },
1297        /* Azurewave */
1298        { USB_DEVICE(0x13d3, 0x3329) },
1299        { USB_DEVICE(0x13d3, 0x3365) },
1300        /* D-Link */
1301        { USB_DEVICE(0x2001, 0x3c15) },
1302        { USB_DEVICE(0x2001, 0x3c19) },
1303        { USB_DEVICE(0x2001, 0x3c1c) },
1304        { USB_DEVICE(0x2001, 0x3c1d) },
1305        { USB_DEVICE(0x2001, 0x3c1e) },
1306        { USB_DEVICE(0x2001, 0x3c20) },
1307        { USB_DEVICE(0x2001, 0x3c22) },
1308        { USB_DEVICE(0x2001, 0x3c23) },
1309        /* LG innotek */
1310        { USB_DEVICE(0x043e, 0x7a22) },
1311        { USB_DEVICE(0x043e, 0x7a42) },
1312        /* Panasonic */
1313        { USB_DEVICE(0x04da, 0x1801) },
1314        { USB_DEVICE(0x04da, 0x1800) },
1315        { USB_DEVICE(0x04da, 0x23f6) },
1316        /* Philips */
1317        { USB_DEVICE(0x0471, 0x2104) },
1318        { USB_DEVICE(0x0471, 0x2126) },
1319        { USB_DEVICE(0x0471, 0x2180) },
1320        { USB_DEVICE(0x0471, 0x2181) },
1321        { USB_DEVICE(0x0471, 0x2182) },
1322        /* Ralink */
1323        { USB_DEVICE(0x148f, 0x5370) },
1324        { USB_DEVICE(0x148f, 0x5372) },
1325#endif
1326#ifdef CONFIG_RT2800USB_RT55XX
1327        /* Arcadyan */
1328        { USB_DEVICE(0x043e, 0x7a32) },
1329        /* AVM GmbH */
1330        { USB_DEVICE(0x057c, 0x8501) },
1331        /* Buffalo */
1332        { USB_DEVICE(0x0411, 0x0241) },
1333        { USB_DEVICE(0x0411, 0x0253) },
1334        /* D-Link */
1335        { USB_DEVICE(0x2001, 0x3c1a) },
1336        { USB_DEVICE(0x2001, 0x3c21) },
1337        /* Proware */
1338        { USB_DEVICE(0x043e, 0x7a13) },
1339        /* Ralink */
1340        { USB_DEVICE(0x148f, 0x5572) },
1341        /* TRENDnet */
1342        { USB_DEVICE(0x20f4, 0x724a) },
1343#endif
1344#ifdef CONFIG_RT2800USB_UNKNOWN
1345        /*
1346         * Unclear what kind of devices these are (they aren't supported by the
1347         * vendor linux driver).
1348         */
1349        /* Abocom */
1350        { USB_DEVICE(0x07b8, 0x3073) },
1351        { USB_DEVICE(0x07b8, 0x3074) },
1352        /* Alpha Networks */
1353        { USB_DEVICE(0x14b2, 0x3c08) },
1354        { USB_DEVICE(0x14b2, 0x3c11) },
1355        /* Amigo */
1356        { USB_DEVICE(0x0e0b, 0x9031) },
1357        { USB_DEVICE(0x0e0b, 0x9041) },
1358        /* ASUS */
1359        { USB_DEVICE(0x0b05, 0x166a) },
1360        { USB_DEVICE(0x0b05, 0x1760) },
1361        { USB_DEVICE(0x0b05, 0x1761) },
1362        { USB_DEVICE(0x0b05, 0x1790) },
1363        { USB_DEVICE(0x0b05, 0x17a7) },
1364        /* AzureWave */
1365        { USB_DEVICE(0x13d3, 0x3262) },
1366        { USB_DEVICE(0x13d3, 0x3284) },
1367        { USB_DEVICE(0x13d3, 0x3322) },
1368        { USB_DEVICE(0x13d3, 0x3340) },
1369        { USB_DEVICE(0x13d3, 0x3399) },
1370        { USB_DEVICE(0x13d3, 0x3400) },
1371        { USB_DEVICE(0x13d3, 0x3401) },
1372        /* Belkin */
1373        { USB_DEVICE(0x050d, 0x1003) },
1374        /* Buffalo */
1375        { USB_DEVICE(0x0411, 0x012e) },
1376        { USB_DEVICE(0x0411, 0x0148) },
1377        { USB_DEVICE(0x0411, 0x0150) },
1378        /* Corega */
1379        { USB_DEVICE(0x07aa, 0x0041) },
1380        { USB_DEVICE(0x07aa, 0x0042) },
1381        { USB_DEVICE(0x18c5, 0x0008) },
1382        /* D-Link */
1383        { USB_DEVICE(0x07d1, 0x3c0b) },
1384        /* Encore */
1385        { USB_DEVICE(0x203d, 0x14a1) },
1386        /* EnGenius */
1387        { USB_DEVICE(0x1740, 0x0600) },
1388        { USB_DEVICE(0x1740, 0x0602) },
1389        /* Gemtek */
1390        { USB_DEVICE(0x15a9, 0x0010) },
1391        /* Gigabyte */
1392        { USB_DEVICE(0x1044, 0x800c) },
1393        /* Hercules */
1394        { USB_DEVICE(0x06f8, 0xe036) },
1395        /* Huawei */
1396        { USB_DEVICE(0x148f, 0xf101) },
1397        /* I-O DATA */
1398        { USB_DEVICE(0x04bb, 0x094b) },
1399        /* LevelOne */
1400        { USB_DEVICE(0x1740, 0x0605) },
1401        { USB_DEVICE(0x1740, 0x0615) },
1402        /* Logitec */
1403        { USB_DEVICE(0x0789, 0x0168) },
1404        { USB_DEVICE(0x0789, 0x0169) },
1405        /* Motorola */
1406        { USB_DEVICE(0x100d, 0x9032) },
1407        /* Pegatron */
1408        { USB_DEVICE(0x05a6, 0x0101) },
1409        { USB_DEVICE(0x1d4d, 0x0010) },
1410        /* Planex */
1411        { USB_DEVICE(0x2019, 0xab24) },
1412        { USB_DEVICE(0x2019, 0xab29) },
1413        /* Qcom */
1414        { USB_DEVICE(0x18e8, 0x6259) },
1415        /* RadioShack */
1416        { USB_DEVICE(0x08b9, 0x1197) },
1417        /* Sitecom */
1418        { USB_DEVICE(0x0df6, 0x003c) },
1419        { USB_DEVICE(0x0df6, 0x004a) },
1420        { USB_DEVICE(0x0df6, 0x004d) },
1421        { USB_DEVICE(0x0df6, 0x0053) },
1422        { USB_DEVICE(0x0df6, 0x0069) },
1423        { USB_DEVICE(0x0df6, 0x006f) },
1424        { USB_DEVICE(0x0df6, 0x0078) },
1425        /* SMC */
1426        { USB_DEVICE(0x083a, 0xa512) },
1427        { USB_DEVICE(0x083a, 0xc522) },
1428        { USB_DEVICE(0x083a, 0xd522) },
1429        { USB_DEVICE(0x083a, 0xf511) },
1430        /* Sweex */
1431        { USB_DEVICE(0x177f, 0x0254) },
1432        /* TP-LINK */
1433        { USB_DEVICE(0xf201, 0x5370) },
1434#endif
1435        { 0, }
1436};
1437
1438MODULE_AUTHOR(DRV_PROJECT);
1439MODULE_VERSION(DRV_VERSION);
1440MODULE_DESCRIPTION("Ralink RT2800 USB Wireless LAN driver.");
1441MODULE_SUPPORTED_DEVICE("Ralink RT2870 USB chipset based cards");
1442MODULE_DEVICE_TABLE(usb, rt2800usb_device_table);
1443MODULE_FIRMWARE(FIRMWARE_RT2870);
1444MODULE_LICENSE("GPL");
1445
1446static int rt2800usb_probe(struct usb_interface *usb_intf,
1447                           const struct usb_device_id *id)
1448{
1449        return rt2x00usb_probe(usb_intf, &rt2800usb_ops);
1450}
1451
1452static struct usb_driver rt2800usb_driver = {
1453        .name           = KBUILD_MODNAME,
1454        .id_table       = rt2800usb_device_table,
1455        .probe          = rt2800usb_probe,
1456        .disconnect     = rt2x00usb_disconnect,
1457        .suspend        = rt2x00usb_suspend,
1458        .resume         = rt2x00usb_resume,
1459        .reset_resume   = rt2x00usb_resume,
1460        .disable_hub_initiated_lpm = 1,
1461};
1462
1463module_usb_driver(rt2800usb_driver);
1464