linux/drivers/net/wireless/ti/wl1251/cmd.c
<<
>>
Prefs
   1#include "cmd.h"
   2
   3#include <linux/module.h>
   4#include <linux/slab.h>
   5#include <linux/etherdevice.h>
   6
   7#include "wl1251.h"
   8#include "reg.h"
   9#include "io.h"
  10#include "ps.h"
  11#include "acx.h"
  12
  13/**
  14 * send command to firmware
  15 *
  16 * @wl: wl struct
  17 * @id: command id
  18 * @buf: buffer containing the command, must work with dma
  19 * @len: length of the buffer
  20 */
  21int wl1251_cmd_send(struct wl1251 *wl, u16 id, void *buf, size_t len)
  22{
  23        struct wl1251_cmd_header *cmd;
  24        unsigned long timeout;
  25        u32 intr;
  26        int ret = 0;
  27
  28        cmd = buf;
  29        cmd->id = id;
  30        cmd->status = 0;
  31
  32        WARN_ON(len % 4 != 0);
  33
  34        wl1251_mem_write(wl, wl->cmd_box_addr, buf, len);
  35
  36        wl1251_reg_write32(wl, ACX_REG_INTERRUPT_TRIG, INTR_TRIG_CMD);
  37
  38        timeout = jiffies + msecs_to_jiffies(WL1251_COMMAND_TIMEOUT);
  39
  40        intr = wl1251_reg_read32(wl, ACX_REG_INTERRUPT_NO_CLEAR);
  41        while (!(intr & WL1251_ACX_INTR_CMD_COMPLETE)) {
  42                if (time_after(jiffies, timeout)) {
  43                        wl1251_error("command complete timeout");
  44                        ret = -ETIMEDOUT;
  45                        goto out;
  46                }
  47
  48                msleep(1);
  49
  50                intr = wl1251_reg_read32(wl, ACX_REG_INTERRUPT_NO_CLEAR);
  51        }
  52
  53        wl1251_reg_write32(wl, ACX_REG_INTERRUPT_ACK,
  54                           WL1251_ACX_INTR_CMD_COMPLETE);
  55
  56out:
  57        return ret;
  58}
  59
  60/**
  61 * send test command to firmware
  62 *
  63 * @wl: wl struct
  64 * @buf: buffer containing the command, with all headers, must work with dma
  65 * @len: length of the buffer
  66 * @answer: is answer needed
  67 */
  68int wl1251_cmd_test(struct wl1251 *wl, void *buf, size_t buf_len, u8 answer)
  69{
  70        int ret;
  71
  72        wl1251_debug(DEBUG_CMD, "cmd test");
  73
  74        ret = wl1251_cmd_send(wl, CMD_TEST, buf, buf_len);
  75
  76        if (ret < 0) {
  77                wl1251_warning("TEST command failed");
  78                return ret;
  79        }
  80
  81        if (answer) {
  82                struct wl1251_command *cmd_answer;
  83
  84                /*
  85                 * The test command got in, we can read the answer.
  86                 * The answer would be a wl1251_command, where the
  87                 * parameter array contains the actual answer.
  88                 */
  89                wl1251_mem_read(wl, wl->cmd_box_addr, buf, buf_len);
  90
  91                cmd_answer = buf;
  92
  93                if (cmd_answer->header.status != CMD_STATUS_SUCCESS)
  94                        wl1251_error("TEST command answer error: %d",
  95                                     cmd_answer->header.status);
  96        }
  97
  98        return 0;
  99}
 100
 101/**
 102 * read acx from firmware
 103 *
 104 * @wl: wl struct
 105 * @id: acx id
 106 * @buf: buffer for the response, including all headers, must work with dma
 107 * @len: length of buf
 108 */
 109int wl1251_cmd_interrogate(struct wl1251 *wl, u16 id, void *buf, size_t len)
 110{
 111        struct acx_header *acx = buf;
 112        int ret;
 113
 114        wl1251_debug(DEBUG_CMD, "cmd interrogate");
 115
 116        acx->id = id;
 117
 118        /* payload length, does not include any headers */
 119        acx->len = len - sizeof(*acx);
 120
 121        ret = wl1251_cmd_send(wl, CMD_INTERROGATE, acx, sizeof(*acx));
 122        if (ret < 0) {
 123                wl1251_error("INTERROGATE command failed");
 124                goto out;
 125        }
 126
 127        /* the interrogate command got in, we can read the answer */
 128        wl1251_mem_read(wl, wl->cmd_box_addr, buf, len);
 129
 130        acx = buf;
 131        if (acx->cmd.status != CMD_STATUS_SUCCESS)
 132                wl1251_error("INTERROGATE command error: %d",
 133                             acx->cmd.status);
 134
 135out:
 136        return ret;
 137}
 138
 139/**
 140 * write acx value to firmware
 141 *
 142 * @wl: wl struct
 143 * @id: acx id
 144 * @buf: buffer containing acx, including all headers, must work with dma
 145 * @len: length of buf
 146 */
 147int wl1251_cmd_configure(struct wl1251 *wl, u16 id, void *buf, size_t len)
 148{
 149        struct acx_header *acx = buf;
 150        int ret;
 151
 152        wl1251_debug(DEBUG_CMD, "cmd configure");
 153
 154        acx->id = id;
 155
 156        /* payload length, does not include any headers */
 157        acx->len = len - sizeof(*acx);
 158
 159        ret = wl1251_cmd_send(wl, CMD_CONFIGURE, acx, len);
 160        if (ret < 0) {
 161                wl1251_warning("CONFIGURE command NOK");
 162                return ret;
 163        }
 164
 165        return 0;
 166}
 167
 168int wl1251_cmd_vbm(struct wl1251 *wl, u8 identity,
 169                   void *bitmap, u16 bitmap_len, u8 bitmap_control)
 170{
 171        struct wl1251_cmd_vbm_update *vbm;
 172        int ret;
 173
 174        wl1251_debug(DEBUG_CMD, "cmd vbm");
 175
 176        vbm = kzalloc(sizeof(*vbm), GFP_KERNEL);
 177        if (!vbm) {
 178                ret = -ENOMEM;
 179                goto out;
 180        }
 181
 182        /* Count and period will be filled by the target */
 183        vbm->tim.bitmap_ctrl = bitmap_control;
 184        if (bitmap_len > PARTIAL_VBM_MAX) {
 185                wl1251_warning("cmd vbm len is %d B, truncating to %d",
 186                               bitmap_len, PARTIAL_VBM_MAX);
 187                bitmap_len = PARTIAL_VBM_MAX;
 188        }
 189        memcpy(vbm->tim.pvb_field, bitmap, bitmap_len);
 190        vbm->tim.identity = identity;
 191        vbm->tim.length = bitmap_len + 3;
 192
 193        vbm->len = cpu_to_le16(bitmap_len + 5);
 194
 195        ret = wl1251_cmd_send(wl, CMD_VBM, vbm, sizeof(*vbm));
 196        if (ret < 0) {
 197                wl1251_error("VBM command failed");
 198                goto out;
 199        }
 200
 201out:
 202        kfree(vbm);
 203        return ret;
 204}
 205
 206int wl1251_cmd_data_path_rx(struct wl1251 *wl, u8 channel, bool enable)
 207{
 208        struct cmd_enabledisable_path *cmd;
 209        int ret;
 210        u16 cmd_rx;
 211
 212        wl1251_debug(DEBUG_CMD, "cmd data path");
 213
 214        cmd = kzalloc(sizeof(*cmd), GFP_KERNEL);
 215        if (!cmd) {
 216                ret = -ENOMEM;
 217                goto out;
 218        }
 219
 220        cmd->channel = channel;
 221
 222        if (enable)
 223                cmd_rx = CMD_ENABLE_RX;
 224        else
 225                cmd_rx = CMD_DISABLE_RX;
 226
 227        ret = wl1251_cmd_send(wl, cmd_rx, cmd, sizeof(*cmd));
 228        if (ret < 0) {
 229                wl1251_error("rx %s cmd for channel %d failed",
 230                             enable ? "start" : "stop", channel);
 231                goto out;
 232        }
 233
 234        wl1251_debug(DEBUG_BOOT, "rx %s cmd channel %d",
 235                     enable ? "start" : "stop", channel);
 236
 237out:
 238        kfree(cmd);
 239        return ret;
 240}
 241
 242int wl1251_cmd_data_path_tx(struct wl1251 *wl, u8 channel, bool enable)
 243{
 244        struct cmd_enabledisable_path *cmd;
 245        int ret;
 246        u16 cmd_tx;
 247
 248        wl1251_debug(DEBUG_CMD, "cmd data path");
 249
 250        cmd = kzalloc(sizeof(*cmd), GFP_KERNEL);
 251        if (!cmd)
 252                return -ENOMEM;
 253
 254        cmd->channel = channel;
 255
 256        if (enable)
 257                cmd_tx = CMD_ENABLE_TX;
 258        else
 259                cmd_tx = CMD_DISABLE_TX;
 260
 261        ret = wl1251_cmd_send(wl, cmd_tx, cmd, sizeof(*cmd));
 262        if (ret < 0)
 263                wl1251_error("tx %s cmd for channel %d failed",
 264                             enable ? "start" : "stop", channel);
 265        else
 266                wl1251_debug(DEBUG_BOOT, "tx %s cmd channel %d",
 267                             enable ? "start" : "stop", channel);
 268
 269        kfree(cmd);
 270        return ret;
 271}
 272
 273int wl1251_cmd_join(struct wl1251 *wl, u8 bss_type, u8 channel,
 274                    u16 beacon_interval, u8 dtim_interval)
 275{
 276        struct cmd_join *join;
 277        int ret, i;
 278        u8 *bssid;
 279
 280        join = kzalloc(sizeof(*join), GFP_KERNEL);
 281        if (!join) {
 282                ret = -ENOMEM;
 283                goto out;
 284        }
 285
 286        wl1251_debug(DEBUG_CMD, "cmd join%s ch %d %d/%d",
 287                     bss_type == BSS_TYPE_IBSS ? " ibss" : "",
 288                     channel, beacon_interval, dtim_interval);
 289
 290        /* Reverse order BSSID */
 291        bssid = (u8 *) &join->bssid_lsb;
 292        for (i = 0; i < ETH_ALEN; i++)
 293                bssid[i] = wl->bssid[ETH_ALEN - i - 1];
 294
 295        join->rx_config_options = wl->rx_config;
 296        join->rx_filter_options = wl->rx_filter;
 297
 298        join->basic_rate_set = RATE_MASK_1MBPS | RATE_MASK_2MBPS |
 299                RATE_MASK_5_5MBPS | RATE_MASK_11MBPS;
 300
 301        join->beacon_interval = beacon_interval;
 302        join->dtim_interval = dtim_interval;
 303        join->bss_type = bss_type;
 304        join->channel = channel;
 305        join->ctrl = JOIN_CMD_CTRL_TX_FLUSH;
 306
 307        ret = wl1251_cmd_send(wl, CMD_START_JOIN, join, sizeof(*join));
 308        if (ret < 0) {
 309                wl1251_error("failed to initiate cmd join");
 310                goto out;
 311        }
 312
 313out:
 314        kfree(join);
 315        return ret;
 316}
 317
 318int wl1251_cmd_ps_mode(struct wl1251 *wl, u8 ps_mode)
 319{
 320        struct wl1251_cmd_ps_params *ps_params = NULL;
 321        int ret = 0;
 322
 323        wl1251_debug(DEBUG_CMD, "cmd set ps mode");
 324
 325        ps_params = kzalloc(sizeof(*ps_params), GFP_KERNEL);
 326        if (!ps_params) {
 327                ret = -ENOMEM;
 328                goto out;
 329        }
 330
 331        ps_params->ps_mode = ps_mode;
 332        ps_params->send_null_data = 1;
 333        ps_params->retries = 5;
 334        ps_params->hang_over_period = 128;
 335        ps_params->null_data_rate = 1; /* 1 Mbps */
 336
 337        ret = wl1251_cmd_send(wl, CMD_SET_PS_MODE, ps_params,
 338                              sizeof(*ps_params));
 339        if (ret < 0) {
 340                wl1251_error("cmd set_ps_mode failed");
 341                goto out;
 342        }
 343
 344out:
 345        kfree(ps_params);
 346        return ret;
 347}
 348
 349int wl1251_cmd_read_memory(struct wl1251 *wl, u32 addr, void *answer,
 350                           size_t len)
 351{
 352        struct cmd_read_write_memory *cmd;
 353        int ret = 0;
 354
 355        wl1251_debug(DEBUG_CMD, "cmd read memory");
 356
 357        cmd = kzalloc(sizeof(*cmd), GFP_KERNEL);
 358        if (!cmd) {
 359                ret = -ENOMEM;
 360                goto out;
 361        }
 362
 363        WARN_ON(len > MAX_READ_SIZE);
 364        len = min_t(size_t, len, MAX_READ_SIZE);
 365
 366        cmd->addr = addr;
 367        cmd->size = len;
 368
 369        ret = wl1251_cmd_send(wl, CMD_READ_MEMORY, cmd, sizeof(*cmd));
 370        if (ret < 0) {
 371                wl1251_error("read memory command failed: %d", ret);
 372                goto out;
 373        }
 374
 375        /* the read command got in, we can now read the answer */
 376        wl1251_mem_read(wl, wl->cmd_box_addr, cmd, sizeof(*cmd));
 377
 378        if (cmd->header.status != CMD_STATUS_SUCCESS)
 379                wl1251_error("error in read command result: %d",
 380                             cmd->header.status);
 381
 382        memcpy(answer, cmd->value, len);
 383
 384out:
 385        kfree(cmd);
 386        return ret;
 387}
 388
 389int wl1251_cmd_template_set(struct wl1251 *wl, u16 cmd_id,
 390                            void *buf, size_t buf_len)
 391{
 392        struct wl1251_cmd_packet_template *cmd;
 393        size_t cmd_len;
 394        int ret = 0;
 395
 396        wl1251_debug(DEBUG_CMD, "cmd template %d", cmd_id);
 397
 398        WARN_ON(buf_len > WL1251_MAX_TEMPLATE_SIZE);
 399        buf_len = min_t(size_t, buf_len, WL1251_MAX_TEMPLATE_SIZE);
 400        cmd_len = ALIGN(sizeof(*cmd) + buf_len, 4);
 401
 402        cmd = kzalloc(cmd_len, GFP_KERNEL);
 403        if (!cmd) {
 404                ret = -ENOMEM;
 405                goto out;
 406        }
 407
 408        cmd->size = cpu_to_le16(buf_len);
 409
 410        if (buf)
 411                memcpy(cmd->data, buf, buf_len);
 412
 413        ret = wl1251_cmd_send(wl, cmd_id, cmd, cmd_len);
 414        if (ret < 0) {
 415                wl1251_warning("cmd set_template failed: %d", ret);
 416                goto out;
 417        }
 418
 419out:
 420        kfree(cmd);
 421        return ret;
 422}
 423
 424int wl1251_cmd_scan(struct wl1251 *wl, u8 *ssid, size_t ssid_len,
 425                    struct ieee80211_channel *channels[],
 426                    unsigned int n_channels, unsigned int n_probes)
 427{
 428        struct wl1251_cmd_scan *cmd;
 429        int i, ret = 0;
 430
 431        wl1251_debug(DEBUG_CMD, "cmd scan channels %d", n_channels);
 432
 433        WARN_ON(n_channels > SCAN_MAX_NUM_OF_CHANNELS);
 434
 435        cmd = kzalloc(sizeof(*cmd), GFP_KERNEL);
 436        if (!cmd)
 437                return -ENOMEM;
 438
 439        cmd->params.rx_config_options = cpu_to_le32(CFG_RX_ALL_GOOD);
 440        cmd->params.rx_filter_options = cpu_to_le32(CFG_RX_PRSP_EN |
 441                                                    CFG_RX_MGMT_EN |
 442                                                    CFG_RX_BCN_EN);
 443        cmd->params.scan_options = 0;
 444        /*
 445         * Use high priority scan when not associated to prevent fw issue
 446         * causing never-ending scans (sometimes 20+ minutes).
 447         * Note: This bug may be caused by the fw's DTIM handling.
 448         */
 449        if (is_zero_ether_addr(wl->bssid))
 450                cmd->params.scan_options |= cpu_to_le16(WL1251_SCAN_OPT_PRIORITY_HIGH);
 451        cmd->params.num_channels = n_channels;
 452        cmd->params.num_probe_requests = n_probes;
 453        cmd->params.tx_rate = cpu_to_le16(1 << 1); /* 2 Mbps */
 454        cmd->params.tid_trigger = 0;
 455
 456        for (i = 0; i < n_channels; i++) {
 457                cmd->channels[i].min_duration =
 458                        cpu_to_le32(WL1251_SCAN_MIN_DURATION);
 459                cmd->channels[i].max_duration =
 460                        cpu_to_le32(WL1251_SCAN_MAX_DURATION);
 461                memset(&cmd->channels[i].bssid_lsb, 0xff, 4);
 462                memset(&cmd->channels[i].bssid_msb, 0xff, 2);
 463                cmd->channels[i].early_termination = 0;
 464                cmd->channels[i].tx_power_att = 0;
 465                cmd->channels[i].channel = channels[i]->hw_value;
 466        }
 467
 468        cmd->params.ssid_len = ssid_len;
 469        if (ssid)
 470                memcpy(cmd->params.ssid, ssid, ssid_len);
 471
 472        ret = wl1251_cmd_send(wl, CMD_SCAN, cmd, sizeof(*cmd));
 473        if (ret < 0) {
 474                wl1251_error("cmd scan failed: %d", ret);
 475                goto out;
 476        }
 477
 478        wl1251_mem_read(wl, wl->cmd_box_addr, cmd, sizeof(*cmd));
 479
 480        if (cmd->header.status != CMD_STATUS_SUCCESS) {
 481                wl1251_error("cmd scan status wasn't success: %d",
 482                             cmd->header.status);
 483                ret = -EIO;
 484                goto out;
 485        }
 486
 487out:
 488        kfree(cmd);
 489        return ret;
 490}
 491
 492int wl1251_cmd_trigger_scan_to(struct wl1251 *wl, u32 timeout)
 493{
 494        struct wl1251_cmd_trigger_scan_to *cmd;
 495        int ret;
 496
 497        wl1251_debug(DEBUG_CMD, "cmd trigger scan to");
 498
 499        cmd = kzalloc(sizeof(*cmd), GFP_KERNEL);
 500        if (!cmd)
 501                return -ENOMEM;
 502
 503        cmd->timeout = timeout;
 504
 505        ret = wl1251_cmd_send(wl, CMD_TRIGGER_SCAN_TO, cmd, sizeof(*cmd));
 506        if (ret < 0) {
 507                wl1251_error("cmd trigger scan to failed: %d", ret);
 508                goto out;
 509        }
 510
 511out:
 512        kfree(cmd);
 513        return ret;
 514}
 515