linux/drivers/media/pci/saa7134/saa7134-empress.c
<<
>>
Prefs
   1/*
   2 *
   3 * (c) 2004 Gerd Knorr <kraxel@bytesex.org> [SuSE Labs]
   4 *
   5 *  This program is free software; you can redistribute it and/or modify
   6 *  it under the terms of the GNU General Public License as published by
   7 *  the Free Software Foundation; either version 2 of the License, or
   8 *  (at your option) any later version.
   9 *
  10 *  This program is distributed in the hope that it will be useful,
  11 *  but WITHOUT ANY WARRANTY; without even the implied warranty of
  12 *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  13 *  GNU General Public License for more details.
  14 *
  15 *  You should have received a copy of the GNU General Public License
  16 *  along with this program; if not, write to the Free Software
  17 *  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  18 */
  19
  20#include "saa7134.h"
  21#include "saa7134-reg.h"
  22
  23#include <linux/init.h>
  24#include <linux/list.h>
  25#include <linux/module.h>
  26#include <linux/kernel.h>
  27#include <linux/delay.h>
  28
  29#include <media/v4l2-common.h>
  30#include <media/v4l2-event.h>
  31
  32/* ------------------------------------------------------------------ */
  33
  34MODULE_AUTHOR("Gerd Knorr <kraxel@bytesex.org> [SuSE Labs]");
  35MODULE_LICENSE("GPL");
  36
  37static unsigned int empress_nr[] = {[0 ... (SAA7134_MAXBOARDS - 1)] = UNSET };
  38
  39module_param_array(empress_nr, int, NULL, 0444);
  40MODULE_PARM_DESC(empress_nr,"ts device number");
  41
  42/* ------------------------------------------------------------------ */
  43
  44static int start_streaming(struct vb2_queue *vq, unsigned int count)
  45{
  46        struct saa7134_dmaqueue *dmaq = vq->drv_priv;
  47        struct saa7134_dev *dev = dmaq->dev;
  48        u32 leading_null_bytes = 0;
  49        int err;
  50
  51        err = saa7134_ts_start_streaming(vq, count);
  52        if (err)
  53                return err;
  54
  55        /* If more cards start to need this, then this
  56           should probably be added to the card definitions. */
  57        switch (dev->board) {
  58        case SAA7134_BOARD_BEHOLD_M6:
  59        case SAA7134_BOARD_BEHOLD_M63:
  60        case SAA7134_BOARD_BEHOLD_M6_EXTRA:
  61                leading_null_bytes = 1;
  62                break;
  63        }
  64        saa_call_all(dev, core, init, leading_null_bytes);
  65        /* Unmute audio */
  66        saa_writeb(SAA7134_AUDIO_MUTE_CTRL,
  67                        saa_readb(SAA7134_AUDIO_MUTE_CTRL) & ~(1 << 6));
  68        dev->empress_started = 1;
  69        return 0;
  70}
  71
  72static void stop_streaming(struct vb2_queue *vq)
  73{
  74        struct saa7134_dmaqueue *dmaq = vq->drv_priv;
  75        struct saa7134_dev *dev = dmaq->dev;
  76
  77        saa7134_ts_stop_streaming(vq);
  78        saa_writeb(SAA7134_SPECIAL_MODE, 0x00);
  79        msleep(20);
  80        saa_writeb(SAA7134_SPECIAL_MODE, 0x01);
  81        msleep(100);
  82        /* Mute audio */
  83        saa_writeb(SAA7134_AUDIO_MUTE_CTRL,
  84                        saa_readb(SAA7134_AUDIO_MUTE_CTRL) | (1 << 6));
  85        dev->empress_started = 0;
  86}
  87
  88static const struct vb2_ops saa7134_empress_qops = {
  89        .queue_setup    = saa7134_ts_queue_setup,
  90        .buf_init       = saa7134_ts_buffer_init,
  91        .buf_prepare    = saa7134_ts_buffer_prepare,
  92        .buf_queue      = saa7134_vb2_buffer_queue,
  93        .wait_prepare   = vb2_ops_wait_prepare,
  94        .wait_finish    = vb2_ops_wait_finish,
  95        .start_streaming = start_streaming,
  96        .stop_streaming = stop_streaming,
  97};
  98
  99/* ------------------------------------------------------------------ */
 100
 101static int empress_enum_fmt_vid_cap(struct file *file, void  *priv,
 102                                        struct v4l2_fmtdesc *f)
 103{
 104        if (f->index != 0)
 105                return -EINVAL;
 106
 107        strlcpy(f->description, "MPEG TS", sizeof(f->description));
 108        f->pixelformat = V4L2_PIX_FMT_MPEG;
 109        f->flags = V4L2_FMT_FLAG_COMPRESSED;
 110        return 0;
 111}
 112
 113static int empress_g_fmt_vid_cap(struct file *file, void *priv,
 114                                struct v4l2_format *f)
 115{
 116        struct saa7134_dev *dev = video_drvdata(file);
 117        struct v4l2_subdev_format fmt = {
 118                .which = V4L2_SUBDEV_FORMAT_ACTIVE,
 119        };
 120        struct v4l2_mbus_framefmt *mbus_fmt = &fmt.format;
 121
 122        saa_call_all(dev, pad, get_fmt, NULL, &fmt);
 123
 124        v4l2_fill_pix_format(&f->fmt.pix, mbus_fmt);
 125        f->fmt.pix.pixelformat  = V4L2_PIX_FMT_MPEG;
 126        f->fmt.pix.sizeimage    = TS_PACKET_SIZE * dev->ts.nr_packets;
 127        f->fmt.pix.bytesperline = 0;
 128
 129        return 0;
 130}
 131
 132static int empress_s_fmt_vid_cap(struct file *file, void *priv,
 133                                struct v4l2_format *f)
 134{
 135        struct saa7134_dev *dev = video_drvdata(file);
 136        struct v4l2_subdev_format format = {
 137                .which = V4L2_SUBDEV_FORMAT_ACTIVE,
 138        };
 139
 140        v4l2_fill_mbus_format(&format.format, &f->fmt.pix, MEDIA_BUS_FMT_FIXED);
 141        saa_call_all(dev, pad, set_fmt, NULL, &format);
 142        v4l2_fill_pix_format(&f->fmt.pix, &format.format);
 143
 144        f->fmt.pix.pixelformat  = V4L2_PIX_FMT_MPEG;
 145        f->fmt.pix.sizeimage    = TS_PACKET_SIZE * dev->ts.nr_packets;
 146        f->fmt.pix.bytesperline = 0;
 147
 148        return 0;
 149}
 150
 151static int empress_try_fmt_vid_cap(struct file *file, void *priv,
 152                                struct v4l2_format *f)
 153{
 154        struct saa7134_dev *dev = video_drvdata(file);
 155        struct v4l2_subdev_pad_config pad_cfg;
 156        struct v4l2_subdev_format format = {
 157                .which = V4L2_SUBDEV_FORMAT_TRY,
 158        };
 159
 160        v4l2_fill_mbus_format(&format.format, &f->fmt.pix, MEDIA_BUS_FMT_FIXED);
 161        saa_call_all(dev, pad, set_fmt, &pad_cfg, &format);
 162        v4l2_fill_pix_format(&f->fmt.pix, &format.format);
 163
 164        f->fmt.pix.pixelformat  = V4L2_PIX_FMT_MPEG;
 165        f->fmt.pix.sizeimage    = TS_PACKET_SIZE * dev->ts.nr_packets;
 166        f->fmt.pix.bytesperline = 0;
 167
 168        return 0;
 169}
 170
 171static const struct v4l2_file_operations ts_fops =
 172{
 173        .owner    = THIS_MODULE,
 174        .open     = v4l2_fh_open,
 175        .release  = vb2_fop_release,
 176        .read     = vb2_fop_read,
 177        .poll     = vb2_fop_poll,
 178        .mmap     = vb2_fop_mmap,
 179        .unlocked_ioctl = video_ioctl2,
 180};
 181
 182static const struct v4l2_ioctl_ops ts_ioctl_ops = {
 183        .vidioc_querycap                = saa7134_querycap,
 184        .vidioc_enum_fmt_vid_cap        = empress_enum_fmt_vid_cap,
 185        .vidioc_try_fmt_vid_cap         = empress_try_fmt_vid_cap,
 186        .vidioc_s_fmt_vid_cap           = empress_s_fmt_vid_cap,
 187        .vidioc_g_fmt_vid_cap           = empress_g_fmt_vid_cap,
 188        .vidioc_reqbufs                 = vb2_ioctl_reqbufs,
 189        .vidioc_querybuf                = vb2_ioctl_querybuf,
 190        .vidioc_qbuf                    = vb2_ioctl_qbuf,
 191        .vidioc_dqbuf                   = vb2_ioctl_dqbuf,
 192        .vidioc_expbuf                  = vb2_ioctl_expbuf,
 193        .vidioc_streamon                = vb2_ioctl_streamon,
 194        .vidioc_streamoff               = vb2_ioctl_streamoff,
 195        .vidioc_g_frequency             = saa7134_g_frequency,
 196        .vidioc_s_frequency             = saa7134_s_frequency,
 197        .vidioc_g_tuner                 = saa7134_g_tuner,
 198        .vidioc_s_tuner                 = saa7134_s_tuner,
 199        .vidioc_enum_input              = saa7134_enum_input,
 200        .vidioc_g_input                 = saa7134_g_input,
 201        .vidioc_s_input                 = saa7134_s_input,
 202        .vidioc_s_std                   = saa7134_s_std,
 203        .vidioc_g_std                   = saa7134_g_std,
 204        .vidioc_querystd                = saa7134_querystd,
 205        .vidioc_log_status              = v4l2_ctrl_log_status,
 206        .vidioc_subscribe_event         = v4l2_ctrl_subscribe_event,
 207        .vidioc_unsubscribe_event       = v4l2_event_unsubscribe,
 208};
 209
 210/* ----------------------------------------------------------- */
 211
 212static struct video_device saa7134_empress_template = {
 213        .name          = "saa7134-empress",
 214        .fops          = &ts_fops,
 215        .ioctl_ops     = &ts_ioctl_ops,
 216
 217        .tvnorms                        = SAA7134_NORMS,
 218};
 219
 220static void empress_signal_update(struct work_struct *work)
 221{
 222        struct saa7134_dev* dev =
 223                container_of(work, struct saa7134_dev, empress_workqueue);
 224
 225        if (dev->nosignal) {
 226                pr_debug("no video signal\n");
 227        } else {
 228                pr_debug("video signal acquired\n");
 229        }
 230}
 231
 232static void empress_signal_change(struct saa7134_dev *dev)
 233{
 234        schedule_work(&dev->empress_workqueue);
 235}
 236
 237static bool empress_ctrl_filter(const struct v4l2_ctrl *ctrl)
 238{
 239        switch (ctrl->id) {
 240        case V4L2_CID_BRIGHTNESS:
 241        case V4L2_CID_HUE:
 242        case V4L2_CID_CONTRAST:
 243        case V4L2_CID_SATURATION:
 244        case V4L2_CID_AUDIO_MUTE:
 245        case V4L2_CID_AUDIO_VOLUME:
 246        case V4L2_CID_PRIVATE_INVERT:
 247        case V4L2_CID_PRIVATE_AUTOMUTE:
 248                return true;
 249        default:
 250                return false;
 251        }
 252}
 253
 254static int empress_init(struct saa7134_dev *dev)
 255{
 256        struct v4l2_ctrl_handler *hdl = &dev->empress_ctrl_handler;
 257        struct vb2_queue *q;
 258        int err;
 259
 260        pr_debug("%s: %s\n", dev->name, __func__);
 261        dev->empress_dev = video_device_alloc();
 262        if (NULL == dev->empress_dev)
 263                return -ENOMEM;
 264        *(dev->empress_dev) = saa7134_empress_template;
 265        dev->empress_dev->v4l2_dev  = &dev->v4l2_dev;
 266        dev->empress_dev->release = video_device_release;
 267        dev->empress_dev->lock = &dev->lock;
 268        snprintf(dev->empress_dev->name, sizeof(dev->empress_dev->name),
 269                 "%s empress (%s)", dev->name,
 270                 saa7134_boards[dev->board].name);
 271        v4l2_ctrl_handler_init(hdl, 21);
 272        v4l2_ctrl_add_handler(hdl, &dev->ctrl_handler, empress_ctrl_filter);
 273        if (dev->empress_sd)
 274                v4l2_ctrl_add_handler(hdl, dev->empress_sd->ctrl_handler, NULL);
 275        if (hdl->error) {
 276                video_device_release(dev->empress_dev);
 277                return hdl->error;
 278        }
 279        dev->empress_dev->ctrl_handler = hdl;
 280
 281        INIT_WORK(&dev->empress_workqueue, empress_signal_update);
 282
 283        q = &dev->empress_vbq;
 284        q->type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
 285        /*
 286         * Do not add VB2_USERPTR: the saa7134 DMA engine cannot handle
 287         * transfers that do not start at the beginning of a page. A USERPTR
 288         * can start anywhere in a page, so USERPTR support is a no-go.
 289         */
 290        q->io_modes = VB2_MMAP | VB2_DMABUF | VB2_READ;
 291        q->drv_priv = &dev->ts_q;
 292        q->ops = &saa7134_empress_qops;
 293        q->gfp_flags = GFP_DMA32;
 294        q->mem_ops = &vb2_dma_sg_memops;
 295        q->buf_struct_size = sizeof(struct saa7134_buf);
 296        q->timestamp_flags = V4L2_BUF_FLAG_TIMESTAMP_MONOTONIC;
 297        q->lock = &dev->lock;
 298        q->dev = &dev->pci->dev;
 299        err = vb2_queue_init(q);
 300        if (err)
 301                return err;
 302        dev->empress_dev->queue = q;
 303
 304        video_set_drvdata(dev->empress_dev, dev);
 305        err = video_register_device(dev->empress_dev,VFL_TYPE_GRABBER,
 306                                    empress_nr[dev->nr]);
 307        if (err < 0) {
 308                pr_info("%s: can't register video device\n",
 309                       dev->name);
 310                video_device_release(dev->empress_dev);
 311                dev->empress_dev = NULL;
 312                return err;
 313        }
 314        pr_info("%s: registered device %s [mpeg]\n",
 315               dev->name, video_device_node_name(dev->empress_dev));
 316
 317        empress_signal_update(&dev->empress_workqueue);
 318        return 0;
 319}
 320
 321static int empress_fini(struct saa7134_dev *dev)
 322{
 323        pr_debug("%s: %s\n", dev->name, __func__);
 324
 325        if (NULL == dev->empress_dev)
 326                return 0;
 327        flush_work(&dev->empress_workqueue);
 328        video_unregister_device(dev->empress_dev);
 329        vb2_queue_release(&dev->empress_vbq);
 330        v4l2_ctrl_handler_free(&dev->empress_ctrl_handler);
 331        dev->empress_dev = NULL;
 332        return 0;
 333}
 334
 335static struct saa7134_mpeg_ops empress_ops = {
 336        .type          = SAA7134_MPEG_EMPRESS,
 337        .init          = empress_init,
 338        .fini          = empress_fini,
 339        .signal_change = empress_signal_change,
 340};
 341
 342static int __init empress_register(void)
 343{
 344        return saa7134_ts_register(&empress_ops);
 345}
 346
 347static void __exit empress_unregister(void)
 348{
 349        saa7134_ts_unregister(&empress_ops);
 350}
 351
 352module_init(empress_register);
 353module_exit(empress_unregister);
 354