linux/kernel/debug/gdbstub.c
<<
>>
Prefs
   1/*
   2 * Kernel Debug Core
   3 *
   4 * Maintainer: Jason Wessel <jason.wessel@windriver.com>
   5 *
   6 * Copyright (C) 2000-2001 VERITAS Software Corporation.
   7 * Copyright (C) 2002-2004 Timesys Corporation
   8 * Copyright (C) 2003-2004 Amit S. Kale <amitkale@linsyssoft.com>
   9 * Copyright (C) 2004 Pavel Machek <pavel@ucw.cz>
  10 * Copyright (C) 2004-2006 Tom Rini <trini@kernel.crashing.org>
  11 * Copyright (C) 2004-2006 LinSysSoft Technologies Pvt. Ltd.
  12 * Copyright (C) 2005-2009 Wind River Systems, Inc.
  13 * Copyright (C) 2007 MontaVista Software, Inc.
  14 * Copyright (C) 2008 Red Hat, Inc., Ingo Molnar <mingo@redhat.com>
  15 *
  16 * Contributors at various stages not listed above:
  17 *  Jason Wessel ( jason.wessel@windriver.com )
  18 *  George Anzinger <george@mvista.com>
  19 *  Anurekh Saxena (anurekh.saxena@timesys.com)
  20 *  Lake Stevens Instrument Division (Glenn Engel)
  21 *  Jim Kingdon, Cygnus Support.
  22 *
  23 * Original KGDB stub: David Grothe <dave@gcom.com>,
  24 * Tigran Aivazian <tigran@sco.com>
  25 *
  26 * This file is licensed under the terms of the GNU General Public License
  27 * version 2. This program is licensed "as is" without any warranty of any
  28 * kind, whether express or implied.
  29 */
  30
  31#include <linux/kernel.h>
  32#include <linux/kgdb.h>
  33#include <linux/kdb.h>
  34#include <linux/serial_core.h>
  35#include <linux/reboot.h>
  36#include <linux/uaccess.h>
  37#include <asm/cacheflush.h>
  38#include <asm/unaligned.h>
  39#include "debug_core.h"
  40
  41#define KGDB_MAX_THREAD_QUERY 17
  42
  43/* Our I/O buffers. */
  44static char                     remcom_in_buffer[BUFMAX];
  45static char                     remcom_out_buffer[BUFMAX];
  46static int                      gdbstub_use_prev_in_buf;
  47static int                      gdbstub_prev_in_buf_pos;
  48
  49/* Storage for the registers, in GDB format. */
  50static unsigned long            gdb_regs[(NUMREGBYTES +
  51                                        sizeof(unsigned long) - 1) /
  52                                        sizeof(unsigned long)];
  53
  54/*
  55 * GDB remote protocol parser:
  56 */
  57
  58#ifdef CONFIG_KGDB_KDB
  59static int gdbstub_read_wait(void)
  60{
  61        int ret = -1;
  62        int i;
  63
  64        if (unlikely(gdbstub_use_prev_in_buf)) {
  65                if (gdbstub_prev_in_buf_pos < gdbstub_use_prev_in_buf)
  66                        return remcom_in_buffer[gdbstub_prev_in_buf_pos++];
  67                else
  68                        gdbstub_use_prev_in_buf = 0;
  69        }
  70
  71        /* poll any additional I/O interfaces that are defined */
  72        while (ret < 0)
  73                for (i = 0; kdb_poll_funcs[i] != NULL; i++) {
  74                        ret = kdb_poll_funcs[i]();
  75                        if (ret > 0)
  76                                break;
  77                }
  78        return ret;
  79}
  80#else
  81static int gdbstub_read_wait(void)
  82{
  83        int ret = dbg_io_ops->read_char();
  84        while (ret == NO_POLL_CHAR)
  85                ret = dbg_io_ops->read_char();
  86        return ret;
  87}
  88#endif
  89/* scan for the sequence $<data>#<checksum> */
  90static void get_packet(char *buffer)
  91{
  92        unsigned char checksum;
  93        unsigned char xmitcsum;
  94        int count;
  95        char ch;
  96
  97        do {
  98                /*
  99                 * Spin and wait around for the start character, ignore all
 100                 * other characters:
 101                 */
 102                while ((ch = (gdbstub_read_wait())) != '$')
 103                        /* nothing */;
 104
 105                kgdb_connected = 1;
 106                checksum = 0;
 107                xmitcsum = -1;
 108
 109                count = 0;
 110
 111                /*
 112                 * now, read until a # or end of buffer is found:
 113                 */
 114                while (count < (BUFMAX - 1)) {
 115                        ch = gdbstub_read_wait();
 116                        if (ch == '#')
 117                                break;
 118                        checksum = checksum + ch;
 119                        buffer[count] = ch;
 120                        count = count + 1;
 121                }
 122
 123                if (ch == '#') {
 124                        xmitcsum = hex_to_bin(gdbstub_read_wait()) << 4;
 125                        xmitcsum += hex_to_bin(gdbstub_read_wait());
 126
 127                        if (checksum != xmitcsum)
 128                                /* failed checksum */
 129                                dbg_io_ops->write_char('-');
 130                        else
 131                                /* successful transfer */
 132                                dbg_io_ops->write_char('+');
 133                        if (dbg_io_ops->flush)
 134                                dbg_io_ops->flush();
 135                }
 136                buffer[count] = 0;
 137        } while (checksum != xmitcsum);
 138}
 139
 140/*
 141 * Send the packet in buffer.
 142 * Check for gdb connection if asked for.
 143 */
 144static void put_packet(char *buffer)
 145{
 146        unsigned char checksum;
 147        int count;
 148        char ch;
 149
 150        /*
 151         * $<packet info>#<checksum>.
 152         */
 153        while (1) {
 154                dbg_io_ops->write_char('$');
 155                checksum = 0;
 156                count = 0;
 157
 158                while ((ch = buffer[count])) {
 159                        dbg_io_ops->write_char(ch);
 160                        checksum += ch;
 161                        count++;
 162                }
 163
 164                dbg_io_ops->write_char('#');
 165                dbg_io_ops->write_char(hex_asc_hi(checksum));
 166                dbg_io_ops->write_char(hex_asc_lo(checksum));
 167                if (dbg_io_ops->flush)
 168                        dbg_io_ops->flush();
 169
 170                /* Now see what we get in reply. */
 171                ch = gdbstub_read_wait();
 172
 173                if (ch == 3)
 174                        ch = gdbstub_read_wait();
 175
 176                /* If we get an ACK, we are done. */
 177                if (ch == '+')
 178                        return;
 179
 180                /*
 181                 * If we get the start of another packet, this means
 182                 * that GDB is attempting to reconnect.  We will NAK
 183                 * the packet being sent, and stop trying to send this
 184                 * packet.
 185                 */
 186                if (ch == '$') {
 187                        dbg_io_ops->write_char('-');
 188                        if (dbg_io_ops->flush)
 189                                dbg_io_ops->flush();
 190                        return;
 191                }
 192        }
 193}
 194
 195static char gdbmsgbuf[BUFMAX + 1];
 196
 197void gdbstub_msg_write(const char *s, int len)
 198{
 199        char *bufptr;
 200        int wcount;
 201        int i;
 202
 203        if (len == 0)
 204                len = strlen(s);
 205
 206        /* 'O'utput */
 207        gdbmsgbuf[0] = 'O';
 208
 209        /* Fill and send buffers... */
 210        while (len > 0) {
 211                bufptr = gdbmsgbuf + 1;
 212
 213                /* Calculate how many this time */
 214                if ((len << 1) > (BUFMAX - 2))
 215                        wcount = (BUFMAX - 2) >> 1;
 216                else
 217                        wcount = len;
 218
 219                /* Pack in hex chars */
 220                for (i = 0; i < wcount; i++)
 221                        bufptr = hex_byte_pack(bufptr, s[i]);
 222                *bufptr = '\0';
 223
 224                /* Move up */
 225                s += wcount;
 226                len -= wcount;
 227
 228                /* Write packet */
 229                put_packet(gdbmsgbuf);
 230        }
 231}
 232
 233/*
 234 * Convert the memory pointed to by mem into hex, placing result in
 235 * buf.  Return a pointer to the last char put in buf (null). May
 236 * return an error.
 237 */
 238char *kgdb_mem2hex(char *mem, char *buf, int count)
 239{
 240        char *tmp;
 241        int err;
 242
 243        /*
 244         * We use the upper half of buf as an intermediate buffer for the
 245         * raw memory copy.  Hex conversion will work against this one.
 246         */
 247        tmp = buf + count;
 248
 249        err = probe_kernel_read(tmp, mem, count);
 250        if (err)
 251                return NULL;
 252        while (count > 0) {
 253                buf = hex_byte_pack(buf, *tmp);
 254                tmp++;
 255                count--;
 256        }
 257        *buf = 0;
 258
 259        return buf;
 260}
 261
 262/*
 263 * Convert the hex array pointed to by buf into binary to be placed in
 264 * mem.  Return a pointer to the character AFTER the last byte
 265 * written.  May return an error.
 266 */
 267int kgdb_hex2mem(char *buf, char *mem, int count)
 268{
 269        char *tmp_raw;
 270        char *tmp_hex;
 271
 272        /*
 273         * We use the upper half of buf as an intermediate buffer for the
 274         * raw memory that is converted from hex.
 275         */
 276        tmp_raw = buf + count * 2;
 277
 278        tmp_hex = tmp_raw - 1;
 279        while (tmp_hex >= buf) {
 280                tmp_raw--;
 281                *tmp_raw = hex_to_bin(*tmp_hex--);
 282                *tmp_raw |= hex_to_bin(*tmp_hex--) << 4;
 283        }
 284
 285        return probe_kernel_write(mem, tmp_raw, count);
 286}
 287
 288/*
 289 * While we find nice hex chars, build a long_val.
 290 * Return number of chars processed.
 291 */
 292int kgdb_hex2long(char **ptr, unsigned long *long_val)
 293{
 294        int hex_val;
 295        int num = 0;
 296        int negate = 0;
 297
 298        *long_val = 0;
 299
 300        if (**ptr == '-') {
 301                negate = 1;
 302                (*ptr)++;
 303        }
 304        while (**ptr) {
 305                hex_val = hex_to_bin(**ptr);
 306                if (hex_val < 0)
 307                        break;
 308
 309                *long_val = (*long_val << 4) | hex_val;
 310                num++;
 311                (*ptr)++;
 312        }
 313
 314        if (negate)
 315                *long_val = -*long_val;
 316
 317        return num;
 318}
 319
 320/*
 321 * Copy the binary array pointed to by buf into mem.  Fix $, #, and
 322 * 0x7d escaped with 0x7d. Return -EFAULT on failure or 0 on success.
 323 * The input buf is overwitten with the result to write to mem.
 324 */
 325static int kgdb_ebin2mem(char *buf, char *mem, int count)
 326{
 327        int size = 0;
 328        char *c = buf;
 329
 330        while (count-- > 0) {
 331                c[size] = *buf++;
 332                if (c[size] == 0x7d)
 333                        c[size] = *buf++ ^ 0x20;
 334                size++;
 335        }
 336
 337        return probe_kernel_write(mem, c, size);
 338}
 339
 340#if DBG_MAX_REG_NUM > 0
 341void pt_regs_to_gdb_regs(unsigned long *gdb_regs, struct pt_regs *regs)
 342{
 343        int i;
 344        int idx = 0;
 345        char *ptr = (char *)gdb_regs;
 346
 347        for (i = 0; i < DBG_MAX_REG_NUM; i++) {
 348                dbg_get_reg(i, ptr + idx, regs);
 349                idx += dbg_reg_def[i].size;
 350        }
 351}
 352
 353void gdb_regs_to_pt_regs(unsigned long *gdb_regs, struct pt_regs *regs)
 354{
 355        int i;
 356        int idx = 0;
 357        char *ptr = (char *)gdb_regs;
 358
 359        for (i = 0; i < DBG_MAX_REG_NUM; i++) {
 360                dbg_set_reg(i, ptr + idx, regs);
 361                idx += dbg_reg_def[i].size;
 362        }
 363}
 364#endif /* DBG_MAX_REG_NUM > 0 */
 365
 366/* Write memory due to an 'M' or 'X' packet. */
 367static int write_mem_msg(int binary)
 368{
 369        char *ptr = &remcom_in_buffer[1];
 370        unsigned long addr;
 371        unsigned long length;
 372        int err;
 373
 374        if (kgdb_hex2long(&ptr, &addr) > 0 && *(ptr++) == ',' &&
 375            kgdb_hex2long(&ptr, &length) > 0 && *(ptr++) == ':') {
 376                if (binary)
 377                        err = kgdb_ebin2mem(ptr, (char *)addr, length);
 378                else
 379                        err = kgdb_hex2mem(ptr, (char *)addr, length);
 380                if (err)
 381                        return err;
 382                if (CACHE_FLUSH_IS_SAFE)
 383                        flush_icache_range(addr, addr + length);
 384                return 0;
 385        }
 386
 387        return -EINVAL;
 388}
 389
 390static void error_packet(char *pkt, int error)
 391{
 392        error = -error;
 393        pkt[0] = 'E';
 394        pkt[1] = hex_asc[(error / 10)];
 395        pkt[2] = hex_asc[(error % 10)];
 396        pkt[3] = '\0';
 397}
 398
 399/*
 400 * Thread ID accessors. We represent a flat TID space to GDB, where
 401 * the per CPU idle threads (which under Linux all have PID 0) are
 402 * remapped to negative TIDs.
 403 */
 404
 405#define BUF_THREAD_ID_SIZE      8
 406
 407static char *pack_threadid(char *pkt, unsigned char *id)
 408{
 409        unsigned char *limit;
 410        int lzero = 1;
 411
 412        limit = id + (BUF_THREAD_ID_SIZE / 2);
 413        while (id < limit) {
 414                if (!lzero || *id != 0) {
 415                        pkt = hex_byte_pack(pkt, *id);
 416                        lzero = 0;
 417                }
 418                id++;
 419        }
 420
 421        if (lzero)
 422                pkt = hex_byte_pack(pkt, 0);
 423
 424        return pkt;
 425}
 426
 427static void int_to_threadref(unsigned char *id, int value)
 428{
 429        put_unaligned_be32(value, id);
 430}
 431
 432static struct task_struct *getthread(struct pt_regs *regs, int tid)
 433{
 434        /*
 435         * Non-positive TIDs are remapped to the cpu shadow information
 436         */
 437        if (tid == 0 || tid == -1)
 438                tid = -atomic_read(&kgdb_active) - 2;
 439        if (tid < -1 && tid > -NR_CPUS - 2) {
 440                if (kgdb_info[-tid - 2].task)
 441                        return kgdb_info[-tid - 2].task;
 442                else
 443                        return idle_task(-tid - 2);
 444        }
 445        if (tid <= 0) {
 446                printk(KERN_ERR "KGDB: Internal thread select error\n");
 447                dump_stack();
 448                return NULL;
 449        }
 450
 451        /*
 452         * find_task_by_pid_ns() does not take the tasklist lock anymore
 453         * but is nicely RCU locked - hence is a pretty resilient
 454         * thing to use:
 455         */
 456        return find_task_by_pid_ns(tid, &init_pid_ns);
 457}
 458
 459
 460/*
 461 * Remap normal tasks to their real PID,
 462 * CPU shadow threads are mapped to -CPU - 2
 463 */
 464static inline int shadow_pid(int realpid)
 465{
 466        if (realpid)
 467                return realpid;
 468
 469        return -raw_smp_processor_id() - 2;
 470}
 471
 472/*
 473 * All the functions that start with gdb_cmd are the various
 474 * operations to implement the handlers for the gdbserial protocol
 475 * where KGDB is communicating with an external debugger
 476 */
 477
 478/* Handle the '?' status packets */
 479static void gdb_cmd_status(struct kgdb_state *ks)
 480{
 481        /*
 482         * We know that this packet is only sent
 483         * during initial connect.  So to be safe,
 484         * we clear out our breakpoints now in case
 485         * GDB is reconnecting.
 486         */
 487        dbg_remove_all_break();
 488
 489        remcom_out_buffer[0] = 'S';
 490        hex_byte_pack(&remcom_out_buffer[1], ks->signo);
 491}
 492
 493static void gdb_get_regs_helper(struct kgdb_state *ks)
 494{
 495        struct task_struct *thread;
 496        void *local_debuggerinfo;
 497        int i;
 498
 499        thread = kgdb_usethread;
 500        if (!thread) {
 501                thread = kgdb_info[ks->cpu].task;
 502                local_debuggerinfo = kgdb_info[ks->cpu].debuggerinfo;
 503        } else {
 504                local_debuggerinfo = NULL;
 505                for_each_online_cpu(i) {
 506                        /*
 507                         * Try to find the task on some other
 508                         * or possibly this node if we do not
 509                         * find the matching task then we try
 510                         * to approximate the results.
 511                         */
 512                        if (thread == kgdb_info[i].task)
 513                                local_debuggerinfo = kgdb_info[i].debuggerinfo;
 514                }
 515        }
 516
 517        /*
 518         * All threads that don't have debuggerinfo should be
 519         * in schedule() sleeping, since all other CPUs
 520         * are in kgdb_wait, and thus have debuggerinfo.
 521         */
 522        if (local_debuggerinfo) {
 523                pt_regs_to_gdb_regs(gdb_regs, local_debuggerinfo);
 524        } else {
 525                /*
 526                 * Pull stuff saved during switch_to; nothing
 527                 * else is accessible (or even particularly
 528                 * relevant).
 529                 *
 530                 * This should be enough for a stack trace.
 531                 */
 532                sleeping_thread_to_gdb_regs(gdb_regs, thread);
 533        }
 534}
 535
 536/* Handle the 'g' get registers request */
 537static void gdb_cmd_getregs(struct kgdb_state *ks)
 538{
 539        gdb_get_regs_helper(ks);
 540        kgdb_mem2hex((char *)gdb_regs, remcom_out_buffer, NUMREGBYTES);
 541}
 542
 543/* Handle the 'G' set registers request */
 544static void gdb_cmd_setregs(struct kgdb_state *ks)
 545{
 546        kgdb_hex2mem(&remcom_in_buffer[1], (char *)gdb_regs, NUMREGBYTES);
 547
 548        if (kgdb_usethread && kgdb_usethread != current) {
 549                error_packet(remcom_out_buffer, -EINVAL);
 550        } else {
 551                gdb_regs_to_pt_regs(gdb_regs, ks->linux_regs);
 552                strcpy(remcom_out_buffer, "OK");
 553        }
 554}
 555
 556/* Handle the 'm' memory read bytes */
 557static void gdb_cmd_memread(struct kgdb_state *ks)
 558{
 559        char *ptr = &remcom_in_buffer[1];
 560        unsigned long length;
 561        unsigned long addr;
 562        char *err;
 563
 564        if (kgdb_hex2long(&ptr, &addr) > 0 && *ptr++ == ',' &&
 565                                        kgdb_hex2long(&ptr, &length) > 0) {
 566                err = kgdb_mem2hex((char *)addr, remcom_out_buffer, length);
 567                if (!err)
 568                        error_packet(remcom_out_buffer, -EINVAL);
 569        } else {
 570                error_packet(remcom_out_buffer, -EINVAL);
 571        }
 572}
 573
 574/* Handle the 'M' memory write bytes */
 575static void gdb_cmd_memwrite(struct kgdb_state *ks)
 576{
 577        int err = write_mem_msg(0);
 578
 579        if (err)
 580                error_packet(remcom_out_buffer, err);
 581        else
 582                strcpy(remcom_out_buffer, "OK");
 583}
 584
 585#if DBG_MAX_REG_NUM > 0
 586static char *gdb_hex_reg_helper(int regnum, char *out)
 587{
 588        int i;
 589        int offset = 0;
 590
 591        for (i = 0; i < regnum; i++)
 592                offset += dbg_reg_def[i].size;
 593        return kgdb_mem2hex((char *)gdb_regs + offset, out,
 594                            dbg_reg_def[i].size);
 595}
 596
 597/* Handle the 'p' individual regster get */
 598static void gdb_cmd_reg_get(struct kgdb_state *ks)
 599{
 600        unsigned long regnum;
 601        char *ptr = &remcom_in_buffer[1];
 602
 603        kgdb_hex2long(&ptr, &regnum);
 604        if (regnum >= DBG_MAX_REG_NUM) {
 605                error_packet(remcom_out_buffer, -EINVAL);
 606                return;
 607        }
 608        gdb_get_regs_helper(ks);
 609        gdb_hex_reg_helper(regnum, remcom_out_buffer);
 610}
 611
 612/* Handle the 'P' individual regster set */
 613static void gdb_cmd_reg_set(struct kgdb_state *ks)
 614{
 615        unsigned long regnum;
 616        char *ptr = &remcom_in_buffer[1];
 617        int i = 0;
 618
 619        kgdb_hex2long(&ptr, &regnum);
 620        if (*ptr++ != '=' ||
 621            !(!kgdb_usethread || kgdb_usethread == current) ||
 622            !dbg_get_reg(regnum, gdb_regs, ks->linux_regs)) {
 623                error_packet(remcom_out_buffer, -EINVAL);
 624                return;
 625        }
 626        memset(gdb_regs, 0, sizeof(gdb_regs));
 627        while (i < sizeof(gdb_regs) * 2)
 628                if (hex_to_bin(ptr[i]) >= 0)
 629                        i++;
 630                else
 631                        break;
 632        i = i / 2;
 633        kgdb_hex2mem(ptr, (char *)gdb_regs, i);
 634        dbg_set_reg(regnum, gdb_regs, ks->linux_regs);
 635        strcpy(remcom_out_buffer, "OK");
 636}
 637#endif /* DBG_MAX_REG_NUM > 0 */
 638
 639/* Handle the 'X' memory binary write bytes */
 640static void gdb_cmd_binwrite(struct kgdb_state *ks)
 641{
 642        int err = write_mem_msg(1);
 643
 644        if (err)
 645                error_packet(remcom_out_buffer, err);
 646        else
 647                strcpy(remcom_out_buffer, "OK");
 648}
 649
 650/* Handle the 'D' or 'k', detach or kill packets */
 651static void gdb_cmd_detachkill(struct kgdb_state *ks)
 652{
 653        int error;
 654
 655        /* The detach case */
 656        if (remcom_in_buffer[0] == 'D') {
 657                error = dbg_remove_all_break();
 658                if (error < 0) {
 659                        error_packet(remcom_out_buffer, error);
 660                } else {
 661                        strcpy(remcom_out_buffer, "OK");
 662                        kgdb_connected = 0;
 663                }
 664                put_packet(remcom_out_buffer);
 665        } else {
 666                /*
 667                 * Assume the kill case, with no exit code checking,
 668                 * trying to force detach the debugger:
 669                 */
 670                dbg_remove_all_break();
 671                kgdb_connected = 0;
 672        }
 673}
 674
 675/* Handle the 'R' reboot packets */
 676static int gdb_cmd_reboot(struct kgdb_state *ks)
 677{
 678        /* For now, only honor R0 */
 679        if (strcmp(remcom_in_buffer, "R0") == 0) {
 680                printk(KERN_CRIT "Executing emergency reboot\n");
 681                strcpy(remcom_out_buffer, "OK");
 682                put_packet(remcom_out_buffer);
 683
 684                /*
 685                 * Execution should not return from
 686                 * machine_emergency_restart()
 687                 */
 688                machine_emergency_restart();
 689                kgdb_connected = 0;
 690
 691                return 1;
 692        }
 693        return 0;
 694}
 695
 696/* Handle the 'q' query packets */
 697static void gdb_cmd_query(struct kgdb_state *ks)
 698{
 699        struct task_struct *g;
 700        struct task_struct *p;
 701        unsigned char thref[BUF_THREAD_ID_SIZE];
 702        char *ptr;
 703        int i;
 704        int cpu;
 705        int finished = 0;
 706
 707        switch (remcom_in_buffer[1]) {
 708        case 's':
 709        case 'f':
 710                if (memcmp(remcom_in_buffer + 2, "ThreadInfo", 10))
 711                        break;
 712
 713                i = 0;
 714                remcom_out_buffer[0] = 'm';
 715                ptr = remcom_out_buffer + 1;
 716                if (remcom_in_buffer[1] == 'f') {
 717                        /* Each cpu is a shadow thread */
 718                        for_each_online_cpu(cpu) {
 719                                ks->thr_query = 0;
 720                                int_to_threadref(thref, -cpu - 2);
 721                                ptr = pack_threadid(ptr, thref);
 722                                *(ptr++) = ',';
 723                                i++;
 724                        }
 725                }
 726
 727                do_each_thread(g, p) {
 728                        if (i >= ks->thr_query && !finished) {
 729                                int_to_threadref(thref, p->pid);
 730                                ptr = pack_threadid(ptr, thref);
 731                                *(ptr++) = ',';
 732                                ks->thr_query++;
 733                                if (ks->thr_query % KGDB_MAX_THREAD_QUERY == 0)
 734                                        finished = 1;
 735                        }
 736                        i++;
 737                } while_each_thread(g, p);
 738
 739                *(--ptr) = '\0';
 740                break;
 741
 742        case 'C':
 743                /* Current thread id */
 744                strcpy(remcom_out_buffer, "QC");
 745                ks->threadid = shadow_pid(current->pid);
 746                int_to_threadref(thref, ks->threadid);
 747                pack_threadid(remcom_out_buffer + 2, thref);
 748                break;
 749        case 'T':
 750                if (memcmp(remcom_in_buffer + 1, "ThreadExtraInfo,", 16))
 751                        break;
 752
 753                ks->threadid = 0;
 754                ptr = remcom_in_buffer + 17;
 755                kgdb_hex2long(&ptr, &ks->threadid);
 756                if (!getthread(ks->linux_regs, ks->threadid)) {
 757                        error_packet(remcom_out_buffer, -EINVAL);
 758                        break;
 759                }
 760                if ((int)ks->threadid > 0) {
 761                        kgdb_mem2hex(getthread(ks->linux_regs,
 762                                        ks->threadid)->comm,
 763                                        remcom_out_buffer, 16);
 764                } else {
 765                        static char tmpstr[23 + BUF_THREAD_ID_SIZE];
 766
 767                        sprintf(tmpstr, "shadowCPU%d",
 768                                        (int)(-ks->threadid - 2));
 769                        kgdb_mem2hex(tmpstr, remcom_out_buffer, strlen(tmpstr));
 770                }
 771                break;
 772#ifdef CONFIG_KGDB_KDB
 773        case 'R':
 774                if (strncmp(remcom_in_buffer, "qRcmd,", 6) == 0) {
 775                        int len = strlen(remcom_in_buffer + 6);
 776
 777                        if ((len % 2) != 0) {
 778                                strcpy(remcom_out_buffer, "E01");
 779                                break;
 780                        }
 781                        kgdb_hex2mem(remcom_in_buffer + 6,
 782                                     remcom_out_buffer, len);
 783                        len = len / 2;
 784                        remcom_out_buffer[len++] = 0;
 785
 786                        kdb_common_init_state(ks);
 787                        kdb_parse(remcom_out_buffer);
 788                        kdb_common_deinit_state();
 789
 790                        strcpy(remcom_out_buffer, "OK");
 791                }
 792                break;
 793#endif
 794        }
 795}
 796
 797/* Handle the 'H' task query packets */
 798static void gdb_cmd_task(struct kgdb_state *ks)
 799{
 800        struct task_struct *thread;
 801        char *ptr;
 802
 803        switch (remcom_in_buffer[1]) {
 804        case 'g':
 805                ptr = &remcom_in_buffer[2];
 806                kgdb_hex2long(&ptr, &ks->threadid);
 807                thread = getthread(ks->linux_regs, ks->threadid);
 808                if (!thread && ks->threadid > 0) {
 809                        error_packet(remcom_out_buffer, -EINVAL);
 810                        break;
 811                }
 812                kgdb_usethread = thread;
 813                ks->kgdb_usethreadid = ks->threadid;
 814                strcpy(remcom_out_buffer, "OK");
 815                break;
 816        case 'c':
 817                ptr = &remcom_in_buffer[2];
 818                kgdb_hex2long(&ptr, &ks->threadid);
 819                if (!ks->threadid) {
 820                        kgdb_contthread = NULL;
 821                } else {
 822                        thread = getthread(ks->linux_regs, ks->threadid);
 823                        if (!thread && ks->threadid > 0) {
 824                                error_packet(remcom_out_buffer, -EINVAL);
 825                                break;
 826                        }
 827                        kgdb_contthread = thread;
 828                }
 829                strcpy(remcom_out_buffer, "OK");
 830                break;
 831        }
 832}
 833
 834/* Handle the 'T' thread query packets */
 835static void gdb_cmd_thread(struct kgdb_state *ks)
 836{
 837        char *ptr = &remcom_in_buffer[1];
 838        struct task_struct *thread;
 839
 840        kgdb_hex2long(&ptr, &ks->threadid);
 841        thread = getthread(ks->linux_regs, ks->threadid);
 842        if (thread)
 843                strcpy(remcom_out_buffer, "OK");
 844        else
 845                error_packet(remcom_out_buffer, -EINVAL);
 846}
 847
 848/* Handle the 'z' or 'Z' breakpoint remove or set packets */
 849static void gdb_cmd_break(struct kgdb_state *ks)
 850{
 851        /*
 852         * Since GDB-5.3, it's been drafted that '0' is a software
 853         * breakpoint, '1' is a hardware breakpoint, so let's do that.
 854         */
 855        char *bpt_type = &remcom_in_buffer[1];
 856        char *ptr = &remcom_in_buffer[2];
 857        unsigned long addr;
 858        unsigned long length;
 859        int error = 0;
 860
 861        if (arch_kgdb_ops.set_hw_breakpoint && *bpt_type >= '1') {
 862                /* Unsupported */
 863                if (*bpt_type > '4')
 864                        return;
 865        } else {
 866                if (*bpt_type != '0' && *bpt_type != '1')
 867                        /* Unsupported. */
 868                        return;
 869        }
 870
 871        /*
 872         * Test if this is a hardware breakpoint, and
 873         * if we support it:
 874         */
 875        if (*bpt_type == '1' && !(arch_kgdb_ops.flags & KGDB_HW_BREAKPOINT))
 876                /* Unsupported. */
 877                return;
 878
 879        if (*(ptr++) != ',') {
 880                error_packet(remcom_out_buffer, -EINVAL);
 881                return;
 882        }
 883        if (!kgdb_hex2long(&ptr, &addr)) {
 884                error_packet(remcom_out_buffer, -EINVAL);
 885                return;
 886        }
 887        if (*(ptr++) != ',' ||
 888                !kgdb_hex2long(&ptr, &length)) {
 889                error_packet(remcom_out_buffer, -EINVAL);
 890                return;
 891        }
 892
 893        if (remcom_in_buffer[0] == 'Z' && *bpt_type == '0')
 894                error = dbg_set_sw_break(addr);
 895        else if (remcom_in_buffer[0] == 'z' && *bpt_type == '0')
 896                error = dbg_remove_sw_break(addr);
 897        else if (remcom_in_buffer[0] == 'Z')
 898                error = arch_kgdb_ops.set_hw_breakpoint(addr,
 899                        (int)length, *bpt_type - '0');
 900        else if (remcom_in_buffer[0] == 'z')
 901                error = arch_kgdb_ops.remove_hw_breakpoint(addr,
 902                        (int) length, *bpt_type - '0');
 903
 904        if (error == 0)
 905                strcpy(remcom_out_buffer, "OK");
 906        else
 907                error_packet(remcom_out_buffer, error);
 908}
 909
 910/* Handle the 'C' signal / exception passing packets */
 911static int gdb_cmd_exception_pass(struct kgdb_state *ks)
 912{
 913        /* C09 == pass exception
 914         * C15 == detach kgdb, pass exception
 915         */
 916        if (remcom_in_buffer[1] == '0' && remcom_in_buffer[2] == '9') {
 917
 918                ks->pass_exception = 1;
 919                remcom_in_buffer[0] = 'c';
 920
 921        } else if (remcom_in_buffer[1] == '1' && remcom_in_buffer[2] == '5') {
 922
 923                ks->pass_exception = 1;
 924                remcom_in_buffer[0] = 'D';
 925                dbg_remove_all_break();
 926                kgdb_connected = 0;
 927                return 1;
 928
 929        } else {
 930                gdbstub_msg_write("KGDB only knows signal 9 (pass)"
 931                        " and 15 (pass and disconnect)\n"
 932                        "Executing a continue without signal passing\n", 0);
 933                remcom_in_buffer[0] = 'c';
 934        }
 935
 936        /* Indicate fall through */
 937        return -1;
 938}
 939
 940/*
 941 * This function performs all gdbserial command procesing
 942 */
 943int gdb_serial_stub(struct kgdb_state *ks)
 944{
 945        int error = 0;
 946        int tmp;
 947
 948        /* Initialize comm buffer and globals. */
 949        memset(remcom_out_buffer, 0, sizeof(remcom_out_buffer));
 950        kgdb_usethread = kgdb_info[ks->cpu].task;
 951        ks->kgdb_usethreadid = shadow_pid(kgdb_info[ks->cpu].task->pid);
 952        ks->pass_exception = 0;
 953
 954        if (kgdb_connected) {
 955                unsigned char thref[BUF_THREAD_ID_SIZE];
 956                char *ptr;
 957
 958                /* Reply to host that an exception has occurred */
 959                ptr = remcom_out_buffer;
 960                *ptr++ = 'T';
 961                ptr = hex_byte_pack(ptr, ks->signo);
 962                ptr += strlen(strcpy(ptr, "thread:"));
 963                int_to_threadref(thref, shadow_pid(current->pid));
 964                ptr = pack_threadid(ptr, thref);
 965                *ptr++ = ';';
 966                put_packet(remcom_out_buffer);
 967        }
 968
 969        while (1) {
 970                error = 0;
 971
 972                /* Clear the out buffer. */
 973                memset(remcom_out_buffer, 0, sizeof(remcom_out_buffer));
 974
 975                get_packet(remcom_in_buffer);
 976
 977                switch (remcom_in_buffer[0]) {
 978                case '?': /* gdbserial status */
 979                        gdb_cmd_status(ks);
 980                        break;
 981                case 'g': /* return the value of the CPU registers */
 982                        gdb_cmd_getregs(ks);
 983                        break;
 984                case 'G': /* set the value of the CPU registers - return OK */
 985                        gdb_cmd_setregs(ks);
 986                        break;
 987                case 'm': /* mAA..AA,LLLL  Read LLLL bytes at address AA..AA */
 988                        gdb_cmd_memread(ks);
 989                        break;
 990                case 'M': /* MAA..AA,LLLL: Write LLLL bytes at address AA..AA */
 991                        gdb_cmd_memwrite(ks);
 992                        break;
 993#if DBG_MAX_REG_NUM > 0
 994                case 'p': /* pXX Return gdb register XX (in hex) */
 995                        gdb_cmd_reg_get(ks);
 996                        break;
 997                case 'P': /* PXX=aaaa Set gdb register XX to aaaa (in hex) */
 998                        gdb_cmd_reg_set(ks);
 999                        break;
1000#endif /* DBG_MAX_REG_NUM > 0 */
1001                case 'X': /* XAA..AA,LLLL: Write LLLL bytes at address AA..AA */
1002                        gdb_cmd_binwrite(ks);
1003                        break;
1004                        /* kill or detach. KGDB should treat this like a
1005                         * continue.
1006                         */
1007                case 'D': /* Debugger detach */
1008                case 'k': /* Debugger detach via kill */
1009                        gdb_cmd_detachkill(ks);
1010                        goto default_handle;
1011                case 'R': /* Reboot */
1012                        if (gdb_cmd_reboot(ks))
1013                                goto default_handle;
1014                        break;
1015                case 'q': /* query command */
1016                        gdb_cmd_query(ks);
1017                        break;
1018                case 'H': /* task related */
1019                        gdb_cmd_task(ks);
1020                        break;
1021                case 'T': /* Query thread status */
1022                        gdb_cmd_thread(ks);
1023                        break;
1024                case 'z': /* Break point remove */
1025                case 'Z': /* Break point set */
1026                        gdb_cmd_break(ks);
1027                        break;
1028#ifdef CONFIG_KGDB_KDB
1029                case '3': /* Escape into back into kdb */
1030                        if (remcom_in_buffer[1] == '\0') {
1031                                gdb_cmd_detachkill(ks);
1032                                return DBG_PASS_EVENT;
1033                        }
1034#endif
1035                case 'C': /* Exception passing */
1036                        tmp = gdb_cmd_exception_pass(ks);
1037                        if (tmp > 0)
1038                                goto default_handle;
1039                        if (tmp == 0)
1040                                break;
1041                        /* Fall through on tmp < 0 */
1042                case 'c': /* Continue packet */
1043                case 's': /* Single step packet */
1044                        if (kgdb_contthread && kgdb_contthread != current) {
1045                                /* Can't switch threads in kgdb */
1046                                error_packet(remcom_out_buffer, -EINVAL);
1047                                break;
1048                        }
1049                        dbg_activate_sw_breakpoints();
1050                        /* Fall through to default processing */
1051                default:
1052default_handle:
1053                        error = kgdb_arch_handle_exception(ks->ex_vector,
1054                                                ks->signo,
1055                                                ks->err_code,
1056                                                remcom_in_buffer,
1057                                                remcom_out_buffer,
1058                                                ks->linux_regs);
1059                        /*
1060                         * Leave cmd processing on error, detach,
1061                         * kill, continue, or single step.
1062                         */
1063                        if (error >= 0 || remcom_in_buffer[0] == 'D' ||
1064                            remcom_in_buffer[0] == 'k') {
1065                                error = 0;
1066                                goto kgdb_exit;
1067                        }
1068
1069                }
1070
1071                /* reply to the request */
1072                put_packet(remcom_out_buffer);
1073        }
1074
1075kgdb_exit:
1076        if (ks->pass_exception)
1077                error = 1;
1078        return error;
1079}
1080
1081int gdbstub_state(struct kgdb_state *ks, char *cmd)
1082{
1083        int error;
1084
1085        switch (cmd[0]) {
1086        case 'e':
1087                error = kgdb_arch_handle_exception(ks->ex_vector,
1088                                                   ks->signo,
1089                                                   ks->err_code,
1090                                                   remcom_in_buffer,
1091                                                   remcom_out_buffer,
1092                                                   ks->linux_regs);
1093                return error;
1094        case 's':
1095        case 'c':
1096                strcpy(remcom_in_buffer, cmd);
1097                return 0;
1098        case '$':
1099                strcpy(remcom_in_buffer, cmd);
1100                gdbstub_use_prev_in_buf = strlen(remcom_in_buffer);
1101                gdbstub_prev_in_buf_pos = 0;
1102                return 0;
1103        }
1104        dbg_io_ops->write_char('+');
1105        put_packet(remcom_out_buffer);
1106        return 0;
1107}
1108
1109/**
1110 * gdbstub_exit - Send an exit message to GDB
1111 * @status: The exit code to report.
1112 */
1113void gdbstub_exit(int status)
1114{
1115        unsigned char checksum, ch, buffer[3];
1116        int loop;
1117
1118        if (!kgdb_connected)
1119                return;
1120        kgdb_connected = 0;
1121
1122        if (!dbg_io_ops || dbg_kdb_mode)
1123                return;
1124
1125        buffer[0] = 'W';
1126        buffer[1] = hex_asc_hi(status);
1127        buffer[2] = hex_asc_lo(status);
1128
1129        dbg_io_ops->write_char('$');
1130        checksum = 0;
1131
1132        for (loop = 0; loop < 3; loop++) {
1133                ch = buffer[loop];
1134                checksum += ch;
1135                dbg_io_ops->write_char(ch);
1136        }
1137
1138        dbg_io_ops->write_char('#');
1139        dbg_io_ops->write_char(hex_asc_hi(checksum));
1140        dbg_io_ops->write_char(hex_asc_lo(checksum));
1141
1142        /* make sure the output is flushed, lest the bootloader clobber it */
1143        if (dbg_io_ops->flush)
1144                dbg_io_ops->flush();
1145}
1146