/*
 * Copyright 2015 IBM Corp.
 *
 * Joel Stanley <joel@jms.id.au>
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License
 * as published by the Free Software Foundation; either version
 * 2 of the License, or (at your option) any later version.
 */

#include <asm/div64.h>
#include <linux/clk.h>
#include <linux/gpio/driver.h>
#include <linux/hashtable.h>
#include <linux/init.h>
#include <linux/io.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/pinctrl/consumer.h>
#include <linux/platform_device.h>
#include <linux/spinlock.h>
#include <linux/string.h>

struct aspeed_bank_props {
        unsigned int bank;
        u32 input;
        u32 output;
};

struct aspeed_gpio_config {
        unsigned int nr_gpios;
        const struct aspeed_bank_props *props;
};

/*
 * @offset_timer: Maps an offset to an @timer_users index, or zero if disabled
 * @timer_users: Tracks the number of users for each timer
 *
 * The @timer_users has four elements but the first element is unused. This is
 * to simplify accounting and indexing, as a zero value in @offset_timer
 * represents disabled debouncing for the GPIO. Any other value for an element
 * of @offset_timer is used as an index into @timer_users. This behaviour of
 * the zero value aligns with the behaviour of zero built from the timer
 * configuration registers (i.e. debouncing is disabled).
 */
struct aspeed_gpio {
        struct gpio_chip chip;
        spinlock_t lock;
        void __iomem *base;
        int irq;
        const struct aspeed_gpio_config *config;

        u8 *offset_timer;
        unsigned int timer_users[4];
        struct clk *clk;
};

struct aspeed_gpio_bank {
        uint16_t        val_regs;
        uint16_t        irq_regs;
        uint16_t        debounce_regs;
        const char      names[4][3];
};

static const int debounce_timers[4] = { 0x00, 0x50, 0x54, 0x58 };

static const struct aspeed_gpio_bank aspeed_gpio_banks[] = {
        {
                .val_regs = 0x0000,
                .irq_regs = 0x0008,
                .debounce_regs = 0x0040,
                .names = { "A", "B", "C", "D" },
        },
        {
                .val_regs = 0x0020,
                .irq_regs = 0x0028,
                .debounce_regs = 0x0048,
                .names = { "E", "F", "G", "H" },
        },
        {
                .val_regs = 0x0070,
                .irq_regs = 0x0098,
                .debounce_regs = 0x00b0,
                .names = { "I", "J", "K", "L" },
        },
        {
                .val_regs = 0x0078,
                .irq_regs = 0x00e8,
                .debounce_regs = 0x0100,
                .names = { "M", "N", "O", "P" },
        },
        {
                .val_regs = 0x0080,
                .irq_regs = 0x0118,
                .debounce_regs = 0x0130,
                .names = { "Q", "R", "S", "T" },
        },
        {
                .val_regs = 0x0088,
                .irq_regs = 0x0148,
                .debounce_regs = 0x0160,
                .names = { "U", "V", "W", "X" },
        },
        {
                .val_regs = 0x01E0,
                .irq_regs = 0x0178,
                .debounce_regs = 0x0190,
                .names = { "Y", "Z", "AA", "AB" },
        },
        {
                .val_regs = 0x01E8,
                .irq_regs = 0x01A8,
                .debounce_regs = 0x01c0,
                .names = { "AC", "", "", "" },
        },
};

#define GPIO_BANK(x)    ((x) >> 5)
#define GPIO_OFFSET(x)  ((x) & 0x1f)
#define GPIO_BIT(x)     BIT(GPIO_OFFSET(x))

#define GPIO_DATA       0x00
#define GPIO_DIR        0x04

#define GPIO_IRQ_ENABLE 0x00
#define GPIO_IRQ_TYPE0  0x04
#define GPIO_IRQ_TYPE1  0x08
#define GPIO_IRQ_TYPE2  0x0c
#define GPIO_IRQ_STATUS 0x10

#define GPIO_DEBOUNCE_SEL1 0x00
#define GPIO_DEBOUNCE_SEL2 0x04

#define _GPIO_SET_DEBOUNCE(t, o, i) ((!!((t) & BIT(i))) << GPIO_OFFSET(o))
#define GPIO_SET_DEBOUNCE1(t, o) _GPIO_SET_DEBOUNCE(t, o, 1)
#define GPIO_SET_DEBOUNCE2(t, o) _GPIO_SET_DEBOUNCE(t, o, 0)

static const struct aspeed_gpio_bank *to_bank(unsigned int offset)
{
        unsigned int bank = GPIO_BANK(offset);

        WARN_ON(bank > ARRAY_SIZE(aspeed_gpio_banks));
        return &aspeed_gpio_banks[bank];
}

static inline bool is_bank_props_sentinel(const struct aspeed_bank_props *props)
{
        return !(props->input || props->output);
}

static inline const struct aspeed_bank_props *find_bank_props(
                struct aspeed_gpio *gpio, unsigned int offset)
{
        const struct aspeed_bank_props *props = gpio->config->props;

        while (!is_bank_props_sentinel(props)) {
                if (props->bank == GPIO_BANK(offset))
                        return props;
                props++;
        }

        return NULL;
}

static inline bool have_gpio(struct aspeed_gpio *gpio, unsigned int offset)
{
        const struct aspeed_bank_props *props = find_bank_props(gpio, offset);
        const struct aspeed_gpio_bank *bank = to_bank(offset);
        unsigned int group = GPIO_OFFSET(offset) / 8;

        return bank->names[group][0] != '\0' &&
                (!props || ((props->input | props->output) & GPIO_BIT(offset)));
}

static inline bool have_input(struct aspeed_gpio *gpio, unsigned int offset)
{
        const struct aspeed_bank_props *props = find_bank_props(gpio, offset);

        return !props || (props->input & GPIO_BIT(offset));
}

#define have_irq(g, o) have_input((g), (o))
#define have_debounce(g, o) have_input((g), (o))

static inline bool have_output(struct aspeed_gpio *gpio, unsigned int offset)
{
        const struct aspeed_bank_props *props = find_bank_props(gpio, offset);

        return !props || (props->output & GPIO_BIT(offset));
}

static void __iomem *bank_val_reg(struct aspeed_gpio *gpio,
                const struct aspeed_gpio_bank *bank,
                unsigned int reg)
{
        return gpio->base + bank->val_regs + reg;
}

static void __iomem *bank_irq_reg(struct aspeed_gpio *gpio,
                const struct aspeed_gpio_bank *bank,
                unsigned int reg)
{
        return gpio->base + bank->irq_regs + reg;
}

static int aspeed_gpio_get(struct gpio_chip *gc, unsigned int offset)
{
        struct aspeed_gpio *gpio = gpiochip_get_data(gc);
        const struct aspeed_gpio_bank *bank = to_bank(offset);

        return !!(ioread32(bank_val_reg(gpio, bank, GPIO_DATA))
                        & GPIO_BIT(offset));
}

static void __aspeed_gpio_set(struct gpio_chip *gc, unsigned int offset,
                              int val)
{
        struct aspeed_gpio *gpio = gpiochip_get_data(gc);
        const struct aspeed_gpio_bank *bank = to_bank(offset);
        void __iomem *addr;
        u32 reg;

        addr = bank_val_reg(gpio, bank, GPIO_DATA);
        reg = ioread32(addr);

        if (val)
                reg |= GPIO_BIT(offset);
        else
                reg &= ~GPIO_BIT(offset);

        iowrite32(reg, addr);
}

static void aspeed_gpio_set(struct gpio_chip *gc, unsigned int offset,
                            int val)
{
        struct aspeed_gpio *gpio = gpiochip_get_data(gc);
        unsigned long flags;

        spin_lock_irqsave(&gpio->lock, flags);

        __aspeed_gpio_set(gc, offset, val);

        spin_unlock_irqrestore(&gpio->lock, flags);
}

static int aspeed_gpio_dir_in(struct gpio_chip *gc, unsigned int offset)
{
        struct aspeed_gpio *gpio = gpiochip_get_data(gc);
        const struct aspeed_gpio_bank *bank = to_bank(offset);
        unsigned long flags;
        u32 reg;

        if (!have_input(gpio, offset))
                return -ENOTSUPP;

        spin_lock_irqsave(&gpio->lock, flags);

        reg = ioread32(bank_val_reg(gpio, bank, GPIO_DIR));
        iowrite32(reg & ~GPIO_BIT(offset), bank_val_reg(gpio, bank, GPIO_DIR));

        spin_unlock_irqrestore(&gpio->lock, flags);

        return 0;
}

static int aspeed_gpio_dir_out(struct gpio_chip *gc,
                               unsigned int offset, int val)
{
        struct aspeed_gpio *gpio = gpiochip_get_data(gc);
        const struct aspeed_gpio_bank *bank = to_bank(offset);
        unsigned long flags;
        u32 reg;

        if (!have_output(gpio, offset))
                return -ENOTSUPP;

        spin_lock_irqsave(&gpio->lock, flags);

        reg = ioread32(bank_val_reg(gpio, bank, GPIO_DIR));
        iowrite32(reg | GPIO_BIT(offset), bank_val_reg(gpio, bank, GPIO_DIR));

        __aspeed_gpio_set(gc, offset, val);

        spin_unlock_irqrestore(&gpio->lock, flags);

        return 0;
}

static int aspeed_gpio_get_direction(struct gpio_chip *gc, unsigned int offset)
{
        struct aspeed_gpio *gpio = gpiochip_get_data(gc);
        const struct aspeed_gpio_bank *bank = to_bank(offset);
        unsigned long flags;
        u32 val;

        if (!have_input(gpio, offset))
                return 0;

        if (!have_output(gpio, offset))
                return 1;

        spin_lock_irqsave(&gpio->lock, flags);

        val = ioread32(bank_val_reg(gpio, bank, GPIO_DIR)) & GPIO_BIT(offset);

        spin_unlock_irqrestore(&gpio->lock, flags);

        return !val;

}

static inline int irqd_to_aspeed_gpio_data(struct irq_data *d,
                struct aspeed_gpio **gpio,
                const struct aspeed_gpio_bank **bank,
                u32 *bit)
{
        int offset;
        struct aspeed_gpio *internal;

        offset = irqd_to_hwirq(d);

        internal = irq_data_get_irq_chip_data(d);

        /* This might be a bit of a questionable place to check */
        if (!have_irq(internal, offset))
                return -ENOTSUPP;

        *gpio = internal;
        *bank = to_bank(offset);
        *bit = GPIO_BIT(offset);

        return 0;
}

static void aspeed_gpio_irq_ack(struct irq_data *d)
{
        const struct aspeed_gpio_bank *bank;
        struct aspeed_gpio *gpio;
        unsigned long flags;
        void __iomem *status_addr;
        u32 bit;
        int rc;

        rc = irqd_to_aspeed_gpio_data(d, &gpio, &bank, &bit);
        if (rc)
                return;

        status_addr = bank_irq_reg(gpio, bank, GPIO_IRQ_STATUS);

        spin_lock_irqsave(&gpio->lock, flags);
        iowrite32(bit, status_addr);
        spin_unlock_irqrestore(&gpio->lock, flags);
}

static void aspeed_gpio_irq_set_mask(struct irq_data *d, bool set)
{
        const struct aspeed_gpio_bank *bank;
        struct aspeed_gpio *gpio;
        unsigned long flags;
        u32 reg, bit;
        void __iomem *addr;
        int rc;

        rc = irqd_to_aspeed_gpio_data(d, &gpio, &bank, &bit);
        if (rc)
                return;

        addr = bank_irq_reg(gpio, bank, GPIO_IRQ_ENABLE);

        spin_lock_irqsave(&gpio->lock, flags);

        reg = ioread32(addr);
        if (set)
                reg |= bit;
        else
                reg &= bit;
        iowrite32(reg, addr);

        spin_unlock_irqrestore(&gpio->lock, flags);
}

static void aspeed_gpio_irq_mask(struct irq_data *d)
{
        aspeed_gpio_irq_set_mask(d, false);
}

static void aspeed_gpio_irq_unmask(struct irq_data *d)
{
        aspeed_gpio_irq_set_mask(d, true);
}

static int aspeed_gpio_set_type(struct irq_data *d, unsigned int type)
{
        u32 type0 = 0;
        u32 type1 = 0;
        u32 type2 = 0;
        u32 bit, reg;
        const struct aspeed_gpio_bank *bank;
        irq_flow_handler_t handler;
        struct aspeed_gpio *gpio;
        unsigned long flags;
        void __iomem *addr;
        int rc;

        rc = irqd_to_aspeed_gpio_data(d, &gpio, &bank, &bit);
        if (rc)
                return -EINVAL;

        switch (type & IRQ_TYPE_SENSE_MASK) {
        case IRQ_TYPE_EDGE_BOTH:
                type2 |= bit;
        case IRQ_TYPE_EDGE_RISING:
                type0 |= bit;
        case IRQ_TYPE_EDGE_FALLING:
                handler = handle_edge_irq;
                break;
        case IRQ_TYPE_LEVEL_HIGH:
                type0 |= bit;
        case IRQ_TYPE_LEVEL_LOW:
                type1 |= bit;
                handler = handle_level_irq;
                break;
        default:
                return -EINVAL;
        }

        spin_lock_irqsave(&gpio->lock, flags);

        addr = bank_irq_reg(gpio, bank, GPIO_IRQ_TYPE0);
        reg = ioread32(addr);
        reg = (reg & ~bit) | type0;
        iowrite32(reg, addr);

        addr = bank_irq_reg(gpio, bank, GPIO_IRQ_TYPE1);
        reg = ioread32(addr);
        reg = (reg & ~bit) | type1;
        iowrite32(reg, addr);

        addr = bank_irq_reg(gpio, bank, GPIO_IRQ_TYPE2);
        reg = ioread32(addr);
        reg = (reg & ~bit) | type2;
        iowrite32(reg, addr);

        spin_unlock_irqrestore(&gpio->lock, flags);

        irq_set_handler_locked(d, handler);

        return 0;
}

static void aspeed_gpio_irq_handler(struct irq_desc *desc)
{
        struct gpio_chip *gc = irq_desc_get_handler_data(desc);
        struct irq_chip *ic = irq_desc_get_chip(desc);
        struct aspeed_gpio *data = gpiochip_get_data(gc);
        unsigned int i, p, girq;
        unsigned long reg;

        chained_irq_enter(ic, desc);

        for (i = 0; i < ARRAY_SIZE(aspeed_gpio_banks); i++) {
                const struct aspeed_gpio_bank *bank = &aspeed_gpio_banks[i];

                reg = ioread32(bank_irq_reg(data, bank, GPIO_IRQ_STATUS));

                for_each_set_bit(p, &reg, 32) {
                        girq = irq_find_mapping(gc->irqdomain, i * 32 + p);
                        generic_handle_irq(girq);
                }

        }

        chained_irq_exit(ic, desc);
}

static struct irq_chip aspeed_gpio_irqchip = {
        .name           = "aspeed-gpio",
        .irq_ack        = aspeed_gpio_irq_ack,
        .irq_mask       = aspeed_gpio_irq_mask,
        .irq_unmask     = aspeed_gpio_irq_unmask,
        .irq_set_type   = aspeed_gpio_set_type,
};

static void set_irq_valid_mask(struct aspeed_gpio *gpio)
{
        const struct aspeed_bank_props *props = gpio->config->props;

        while (!is_bank_props_sentinel(props)) {
                unsigned int offset;
                const unsigned long int input = props->input;

                /* Pretty crummy approach, but similar to GPIO core */
                for_each_clear_bit(offset, &input, 32) {
                        unsigned int i = props->bank * 32 + offset;

                        if (i >= gpio->config->nr_gpios)
                                break;

                        clear_bit(i, gpio->chip.irq_valid_mask);
                }

                props++;
        }
}

static int aspeed_gpio_setup_irqs(struct aspeed_gpio *gpio,
                struct platform_device *pdev)
{
        int rc;

        rc = platform_get_irq(pdev, 0);
        if (rc < 0)
                return rc;

        gpio->irq = rc;

        set_irq_valid_mask(gpio);

        rc = gpiochip_irqchip_add(&gpio->chip, &aspeed_gpio_irqchip,
                        0, handle_bad_irq, IRQ_TYPE_NONE);
        if (rc) {
                dev_info(&pdev->dev, "Could not add irqchip\n");
                return rc;
        }

        gpiochip_set_chained_irqchip(&gpio->chip, &aspeed_gpio_irqchip,
                                     gpio->irq, aspeed_gpio_irq_handler);

        return 0;
}

static int aspeed_gpio_request(struct gpio_chip *chip, unsigned int offset)
{
        if (!have_gpio(gpiochip_get_data(chip), offset))
                return -ENODEV;

        return pinctrl_request_gpio(chip->base + offset);
}

static void aspeed_gpio_free(struct gpio_chip *chip, unsigned int offset)
{
        pinctrl_free_gpio(chip->base + offset);
}

static inline void __iomem *bank_debounce_reg(struct aspeed_gpio *gpio,
                const struct aspeed_gpio_bank *bank,
                unsigned int reg)
{
        return gpio->base + bank->debounce_regs + reg;
}

static int usecs_to_cycles(struct aspeed_gpio *gpio, unsigned long usecs,
                u32 *cycles)
{
        u64 rate;
        u64 n;
        u32 r;

        rate = clk_get_rate(gpio->clk);
        if (!rate)
                return -ENOTSUPP;

        n = rate * usecs;
        r = do_div(n, 1000000);

        if (n >= U32_MAX)
                return -ERANGE;

        /* At least as long as the requested time */
        *cycles = n + (!!r);

        return 0;
}

/* Call under gpio->lock */
static int register_allocated_timer(struct aspeed_gpio *gpio,
                unsigned int offset, unsigned int timer)
{
        if (WARN(gpio->offset_timer[offset] != 0,
                                "Offset %d already allocated timer %d\n",
                                offset, gpio->offset_timer[offset]))
                return -EINVAL;

        if (WARN(gpio->timer_users[timer] == UINT_MAX,
                                "Timer user count would overflow\n"))
                return -EPERM;

        gpio->offset_timer[offset] = timer;
        gpio->timer_users[timer]++;

        return 0;
}

/* Call under gpio->lock */
static int unregister_allocated_timer(struct aspeed_gpio *gpio,
                unsigned int offset)
{
        if (WARN(gpio->offset_timer[offset] == 0,
                                "No timer allocated to offset %d\n", offset))
                return -EINVAL;

        if (WARN(gpio->timer_users[gpio->offset_timer[offset]] == 0,
                                "No users recorded for timer %d\n",
                                gpio->offset_timer[offset]))
                return -EINVAL;

        gpio->timer_users[gpio->offset_timer[offset]]--;
        gpio->offset_timer[offset] = 0;

        return 0;
}

/* Call under gpio->lock */
static inline bool timer_allocation_registered(struct aspeed_gpio *gpio,
                unsigned int offset)
{
        return gpio->offset_timer[offset] > 0;
}

/* Call under gpio->lock */
static void configure_timer(struct aspeed_gpio *gpio, unsigned int offset,
                unsigned int timer)
{
        const struct aspeed_gpio_bank *bank = to_bank(offset);
        const u32 mask = GPIO_BIT(offset);
        void __iomem *addr;
        u32 val;

        addr = bank_debounce_reg(gpio, bank, GPIO_DEBOUNCE_SEL1);
        val = ioread32(addr);
        iowrite32((val & ~mask) | GPIO_SET_DEBOUNCE1(timer, offset), addr);

        addr = bank_debounce_reg(gpio, bank, GPIO_DEBOUNCE_SEL2);
        val = ioread32(addr);
        iowrite32((val & ~mask) | GPIO_SET_DEBOUNCE2(timer, offset), addr);
}

static int enable_debounce(struct gpio_chip *chip, unsigned int offset,
                                    unsigned long usecs)
{
        struct aspeed_gpio *gpio = gpiochip_get_data(chip);
        u32 requested_cycles;
        unsigned long flags;
        int rc;
        int i;

        if (!gpio->clk)
                return -EINVAL;

        rc = usecs_to_cycles(gpio, usecs, &requested_cycles);
        if (rc < 0) {
                dev_warn(chip->parent, "Failed to convert %luus to cycles at %luHz: %d\n",
                                usecs, clk_get_rate(gpio->clk), rc);
                return rc;
        }

        spin_lock_irqsave(&gpio->lock, flags);

        if (timer_allocation_registered(gpio, offset)) {
                rc = unregister_allocated_timer(gpio, offset);
                if (rc < 0)
                        goto out;
        }

        /* Try to find a timer already configured for the debounce period */
        for (i = 1; i < ARRAY_SIZE(debounce_timers); i++) {
                u32 cycles;

                cycles = ioread32(gpio->base + debounce_timers[i]);
                if (requested_cycles == cycles)
                        break;
        }

        if (i == ARRAY_SIZE(debounce_timers)) {
                int j;

                /*
                 * As there are no timers configured for the requested debounce
                 * period, find an unused timer instead
                 */
                for (j = 1; j < ARRAY_SIZE(gpio->timer_users); j++) {
                        if (gpio->timer_users[j] == 0)
                                break;
                }

                if (j == ARRAY_SIZE(gpio->timer_users)) {
                        dev_warn(chip->parent,
                                        "Debounce timers exhausted, cannot debounce for period %luus\n",
                                        usecs);

                        rc = -EPERM;

                        /*
                         * We already adjusted the accounting to remove @offset
                         * as a user of its previous timer, so also configure
                         * the hardware so @offset has timers disabled for
                         * consistency.
                         */
                        configure_timer(gpio, offset, 0);
                        goto out;
                }

                i = j;

                iowrite32(requested_cycles, gpio->base + debounce_timers[i]);
        }

        if (WARN(i == 0, "Cannot register index of disabled timer\n")) {
                rc = -EINVAL;
                goto out;
        }

        register_allocated_timer(gpio, offset, i);
        configure_timer(gpio, offset, i);

out:
        spin_unlock_irqrestore(&gpio->lock, flags);

        return rc;
}

static int disable_debounce(struct gpio_chip *chip, unsigned int offset)
{
        struct aspeed_gpio *gpio = gpiochip_get_data(chip);
        unsigned long flags;
        int rc;

        spin_lock_irqsave(&gpio->lock, flags);

        rc = unregister_allocated_timer(gpio, offset);
        if (!rc)
                configure_timer(gpio, offset, 0);

        spin_unlock_irqrestore(&gpio->lock, flags);

        return rc;
}

static int set_debounce(struct gpio_chip *chip, unsigned int offset,
                                    unsigned long usecs)
{
        struct aspeed_gpio *gpio = gpiochip_get_data(chip);

        if (!have_debounce(gpio, offset))
                return -ENOTSUPP;

        if (usecs)
                return enable_debounce(chip, offset, usecs);

        return disable_debounce(chip, offset);
}

static int aspeed_gpio_set_config(struct gpio_chip *chip, unsigned int offset,
                                  unsigned long config)
{
        unsigned long param = pinconf_to_config_param(config);
        u32 arg = pinconf_to_config_argument(config);

        if (param == PIN_CONFIG_INPUT_DEBOUNCE)
                return set_debounce(chip, offset, arg);
        else if (param == PIN_CONFIG_BIAS_DISABLE ||
                        param == PIN_CONFIG_BIAS_PULL_DOWN ||
                        param == PIN_CONFIG_DRIVE_STRENGTH)
                return pinctrl_gpio_set_config(offset, config);
        else if (param == PIN_CONFIG_DRIVE_OPEN_DRAIN ||
                        param == PIN_CONFIG_DRIVE_OPEN_SOURCE)
                /* Return -ENOTSUPP to trigger emulation, as per datasheet */
                return -ENOTSUPP;

        return -ENOTSUPP;
}

/*
 * Any banks not specified in a struct aspeed_bank_props array are assumed to
 * have the properties:
 *
 *     { .input = 0xffffffff, .output = 0xffffffff }
 */

static const struct aspeed_bank_props ast2400_bank_props[] = {
        /*     input      output   */
        { 5, 0xffffffff, 0x0000ffff }, /* U/V/W/X */
        { 6, 0x0000000f, 0x0fffff0f }, /* Y/Z/AA/AB, two 4-GPIO holes */
        { },
};

static const struct aspeed_gpio_config ast2400_config =
        /* 220 for simplicity, really 216 with two 4-GPIO holes, four at end */
        { .nr_gpios = 220, .props = ast2400_bank_props, };

static const struct aspeed_bank_props ast2500_bank_props[] = {
        /*     input      output   */
        { 5, 0xffffffff, 0x0000ffff }, /* U/V/W/X */
        { 6, 0x0fffffff, 0x0fffffff }, /* Y/Z/AA/AB, 4-GPIO hole */
        { 7, 0x000000ff, 0x000000ff }, /* AC */
        { },
};

static const struct aspeed_gpio_config ast2500_config =
        /* 232 for simplicity, actual number is 228 (4-GPIO hole in GPIOAB) */
        { .nr_gpios = 232, .props = ast2500_bank_props, };

static const struct of_device_id aspeed_gpio_of_table[] = {
        { .compatible = "aspeed,ast2400-gpio", .data = &ast2400_config, },
        { .compatible = "aspeed,ast2500-gpio", .data = &ast2500_config, },
        {}
};
MODULE_DEVICE_TABLE(of, aspeed_gpio_of_table);

static int __init aspeed_gpio_probe(struct platform_device *pdev)
{
        const struct of_device_id *gpio_id;
        struct aspeed_gpio *gpio;
        struct resource *res;
        int rc;

        gpio = devm_kzalloc(&pdev->dev, sizeof(*gpio), GFP_KERNEL);
        if (!gpio)
                return -ENOMEM;

        res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
        gpio->base = devm_ioremap_resource(&pdev->dev, res);
        if (IS_ERR(gpio->base))
                return PTR_ERR(gpio->base);

        spin_lock_init(&gpio->lock);

        gpio_id = of_match_node(aspeed_gpio_of_table, pdev->dev.of_node);
        if (!gpio_id)
                return -EINVAL;

        gpio->clk = of_clk_get(pdev->dev.of_node, 0);
        if (IS_ERR(gpio->clk)) {
                dev_warn(&pdev->dev,
                                "Failed to get clock from devicetree, debouncing disabled\n");
                gpio->clk = NULL;
        }

        gpio->config = gpio_id->data;

        gpio->chip.parent = &pdev->dev;
        gpio->chip.ngpio = gpio->config->nr_gpios;
        gpio->chip.parent = &pdev->dev;
        gpio->chip.direction_input = aspeed_gpio_dir_in;
        gpio->chip.direction_output = aspeed_gpio_dir_out;
        gpio->chip.get_direction = aspeed_gpio_get_direction;
        gpio->chip.request = aspeed_gpio_request;
        gpio->chip.free = aspeed_gpio_free;
        gpio->chip.get = aspeed_gpio_get;
        gpio->chip.set = aspeed_gpio_set;
        gpio->chip.set_config = aspeed_gpio_set_config;
        gpio->chip.label = dev_name(&pdev->dev);
        gpio->chip.base = -1;
        gpio->chip.irq_need_valid_mask = true;

        rc = devm_gpiochip_add_data(&pdev->dev, &gpio->chip, gpio);
        if (rc < 0)
                return rc;

        gpio->offset_timer =
                devm_kzalloc(&pdev->dev, gpio->chip.ngpio, GFP_KERNEL);

        return aspeed_gpio_setup_irqs(gpio, pdev);
}

static struct platform_driver aspeed_gpio_driver = {
        .driver = {
                .name = KBUILD_MODNAME,
                .of_match_table = aspeed_gpio_of_table,
        },
};

module_platform_driver_probe(aspeed_gpio_driver, aspeed_gpio_probe);

MODULE_DESCRIPTION("Aspeed GPIO Driver");
MODULE_LICENSE("GPL");