LXR linux/drivers/scsi/mpt3sas/mpi/mpi2

   1/* SPDX-License-Identifier: GPL-2.0 */
   2/*
   3 * Copyright 2000-2015 Avago Technologies.  All rights reserved.
   4 *
   5 *
   6 *          Name:  mpi2_sas.h
   7 *         Title:  MPI Serial Attached SCSI structures and definitions
   8 * Creation Date:  February 9, 2007
   9 *
  10 * mpi2_sas.h Version:  02.00.10
  11 *
  12 * NOTE: Names (typedefs, defines, etc.) beginning with an MPI25 or Mpi25
  13 *       prefix are for use only on MPI v2.5 products, and must not be used
  14 *       with MPI v2.0 products. Unless otherwise noted, names beginning with
  15 *       MPI2 or Mpi2 are for use with both MPI v2.0 and MPI v2.5 products.
  16 *
  17 * Version History
  18 * ---------------
  19 *
  20 * Date      Version   Description
  21 * --------  --------  ------------------------------------------------------
  22 * 04-30-07  02.00.00  Corresponds to Fusion-MPT MPI Specification Rev A.
  23 * 06-26-07  02.00.01  Added Clear All Persistent Operation to SAS IO Unit
  24 *                     Control Request.
  25 * 10-02-08  02.00.02  Added Set IOC Parameter Operation to SAS IO Unit Control
  26 *                     Request.
  27 * 10-28-09  02.00.03  Changed the type of SGL in MPI2_SATA_PASSTHROUGH_REQUEST
  28 *                     to MPI2_SGE_IO_UNION since it supports chained SGLs.
  29 * 05-12-10  02.00.04  Modified some comments.
  30 * 08-11-10  02.00.05  Added NCQ operations to SAS IO Unit Control.
  31 * 11-18-11  02.00.06  Incorporating additions for MPI v2.5.
  32 * 07-10-12  02.00.07  Added MPI2_SATA_PT_SGE_UNION for use in the SATA
  33 *                     Passthrough Request message.
  34 * 08-19-13  02.00.08  Made MPI2_SAS_OP_TRANSMIT_PORT_SELECT_SIGNAL obsolete
  35 *                      for anything newer than MPI v2.0.
  36 * 11-18-14  02.00.09  Updated copyright information.
  37 * 03-16-15  02.00.10  Updated for MPI v2.6.
  38 *                     Added MPI2_SATA_PT_REQ_PT_FLAGS_FPDMA.
  39 * --------------------------------------------------------------------------
  40 */
  41
  42#ifndef MPI2_SAS_H
  43#define MPI2_SAS_H
  44
  45/*
  46 *Values for SASStatus.
  47 */
  48#define MPI2_SASSTATUS_SUCCESS                          (0x00)
  49#define MPI2_SASSTATUS_UNKNOWN_ERROR                    (0x01)
  50#define MPI2_SASSTATUS_INVALID_FRAME                    (0x02)
  51#define MPI2_SASSTATUS_UTC_BAD_DEST                     (0x03)
  52#define MPI2_SASSTATUS_UTC_BREAK_RECEIVED               (0x04)
  53#define MPI2_SASSTATUS_UTC_CONNECT_RATE_NOT_SUPPORTED   (0x05)
  54#define MPI2_SASSTATUS_UTC_PORT_LAYER_REQUEST           (0x06)
  55#define MPI2_SASSTATUS_UTC_PROTOCOL_NOT_SUPPORTED       (0x07)
  56#define MPI2_SASSTATUS_UTC_STP_RESOURCES_BUSY           (0x08)
  57#define MPI2_SASSTATUS_UTC_WRONG_DESTINATION            (0x09)
  58#define MPI2_SASSTATUS_SHORT_INFORMATION_UNIT           (0x0A)
  59#define MPI2_SASSTATUS_LONG_INFORMATION_UNIT            (0x0B)
  60#define MPI2_SASSTATUS_XFER_RDY_INCORRECT_WRITE_DATA    (0x0C)
  61#define MPI2_SASSTATUS_XFER_RDY_REQUEST_OFFSET_ERROR    (0x0D)
  62#define MPI2_SASSTATUS_XFER_RDY_NOT_EXPECTED            (0x0E)
  63#define MPI2_SASSTATUS_DATA_INCORRECT_DATA_LENGTH       (0x0F)
  64#define MPI2_SASSTATUS_DATA_TOO_MUCH_READ_DATA          (0x10)
  65#define MPI2_SASSTATUS_DATA_OFFSET_ERROR                (0x11)
  66#define MPI2_SASSTATUS_SDSF_NAK_RECEIVED                (0x12)
  67#define MPI2_SASSTATUS_SDSF_CONNECTION_FAILED           (0x13)
  68#define MPI2_SASSTATUS_INITIATOR_RESPONSE_TIMEOUT       (0x14)
  69
  70/*
  71 *Values for the SAS DeviceInfo field used in SAS Device Status Change Event
  72 *data and SAS Configuration pages.
  73 */
  74#define MPI2_SAS_DEVICE_INFO_SEP                (0x00004000)
  75#define MPI2_SAS_DEVICE_INFO_ATAPI_DEVICE       (0x00002000)
  76#define MPI2_SAS_DEVICE_INFO_LSI_DEVICE         (0x00001000)
  77#define MPI2_SAS_DEVICE_INFO_DIRECT_ATTACH      (0x00000800)
  78#define MPI2_SAS_DEVICE_INFO_SSP_TARGET         (0x00000400)
  79#define MPI2_SAS_DEVICE_INFO_STP_TARGET         (0x00000200)
  80#define MPI2_SAS_DEVICE_INFO_SMP_TARGET         (0x00000100)
  81#define MPI2_SAS_DEVICE_INFO_SATA_DEVICE        (0x00000080)
  82#define MPI2_SAS_DEVICE_INFO_SSP_INITIATOR      (0x00000040)
  83#define MPI2_SAS_DEVICE_INFO_STP_INITIATOR      (0x00000020)
  84#define MPI2_SAS_DEVICE_INFO_SMP_INITIATOR      (0x00000010)
  85#define MPI2_SAS_DEVICE_INFO_SATA_HOST          (0x00000008)
  86
  87#define MPI2_SAS_DEVICE_INFO_MASK_DEVICE_TYPE   (0x00000007)
  88#define MPI2_SAS_DEVICE_INFO_NO_DEVICE          (0x00000000)
  89#define MPI2_SAS_DEVICE_INFO_END_DEVICE         (0x00000001)
  90#define MPI2_SAS_DEVICE_INFO_EDGE_EXPANDER      (0x00000002)
  91#define MPI2_SAS_DEVICE_INFO_FANOUT_EXPANDER    (0x00000003)
  92
  93/*****************************************************************************
  94*
  95*       SAS Messages
  96*
  97*****************************************************************************/
  98
  99/****************************************************************************
 100* SMP Passthrough messages
 101****************************************************************************/
 102
 103/*SMP Passthrough Request Message */
 104typedef struct _MPI2_SMP_PASSTHROUGH_REQUEST {
 105        U8 PassthroughFlags;    /*0x00 */
 106        U8 PhysicalPort;        /*0x01 */
 107        U8 ChainOffset;         /*0x02 */
 108        U8 Function;            /*0x03 */
 109        U16 RequestDataLength;  /*0x04 */
 110        U8 SGLFlags;            /*0x06*//*MPI v2.0 only. Reserved on MPI v2.5*/
 111        U8 MsgFlags;            /*0x07 */
 112        U8 VP_ID;               /*0x08 */
 113        U8 VF_ID;               /*0x09 */
 114        U16 Reserved1;          /*0x0A */
 115        U32 Reserved2;          /*0x0C */
 116        U64 SASAddress;         /*0x10 */
 117        U32 Reserved3;          /*0x18 */
 118        U32 Reserved4;          /*0x1C */
 119        MPI2_SIMPLE_SGE_UNION SGL;/*0x20 */
 120} MPI2_SMP_PASSTHROUGH_REQUEST, *PTR_MPI2_SMP_PASSTHROUGH_REQUEST,
 121        Mpi2SmpPassthroughRequest_t, *pMpi2SmpPassthroughRequest_t;
 122
 123/*values for PassthroughFlags field */
 124#define MPI2_SMP_PT_REQ_PT_FLAGS_IMMEDIATE      (0x80)
 125
 126/*MPI v2.0: use MPI2_SGLFLAGS_ defines from mpi2.h for the SGLFlags field */
 127
 128/*SMP Passthrough Reply Message */
 129typedef struct _MPI2_SMP_PASSTHROUGH_REPLY {
 130        U8 PassthroughFlags;    /*0x00 */
 131        U8 PhysicalPort;        /*0x01 */
 132        U8 MsgLength;           /*0x02 */
 133        U8 Function;            /*0x03 */
 134        U16 ResponseDataLength; /*0x04 */
 135        U8 SGLFlags;            /*0x06 */
 136        U8 MsgFlags;            /*0x07 */
 137        U8 VP_ID;               /*0x08 */
 138        U8 VF_ID;               /*0x09 */
 139        U16 Reserved1;          /*0x0A */
 140        U8 Reserved2;           /*0x0C */
 141        U8 SASStatus;           /*0x0D */
 142        U16 IOCStatus;          /*0x0E */
 143        U32 IOCLogInfo;         /*0x10 */
 144        U32 Reserved3;          /*0x14 */
 145        U8 ResponseData[4];     /*0x18 */
 146} MPI2_SMP_PASSTHROUGH_REPLY, *PTR_MPI2_SMP_PASSTHROUGH_REPLY,
 147        Mpi2SmpPassthroughReply_t, *pMpi2SmpPassthroughReply_t;
 148
 149/*values for PassthroughFlags field */
 150#define MPI2_SMP_PT_REPLY_PT_FLAGS_IMMEDIATE    (0x80)
 151
 152/*values for SASStatus field are at the top of this file */
 153
 154/****************************************************************************
 155* SATA Passthrough messages
 156****************************************************************************/
 157
 158typedef union _MPI2_SATA_PT_SGE_UNION {
 159        MPI2_SGE_SIMPLE_UNION MpiSimple;        /*MPI v2.0 only */
 160        MPI2_SGE_CHAIN_UNION MpiChain;  /*MPI v2.0 only */
 161        MPI2_IEEE_SGE_SIMPLE_UNION IeeeSimple;
 162        MPI2_IEEE_SGE_CHAIN_UNION IeeeChain;    /*MPI v2.0 only */
 163        MPI25_IEEE_SGE_CHAIN64 IeeeChain64;     /*MPI v2.5 only */
 164} MPI2_SATA_PT_SGE_UNION, *PTR_MPI2_SATA_PT_SGE_UNION,
 165        Mpi2SataPTSGEUnion_t, *pMpi2SataPTSGEUnion_t;
 166
 167/*SATA Passthrough Request Message */
 168typedef struct _MPI2_SATA_PASSTHROUGH_REQUEST {
 169        U16 DevHandle;          /*0x00 */
 170        U8 ChainOffset;         /*0x02 */
 171        U8 Function;            /*0x03 */
 172        U16 PassthroughFlags;   /*0x04 */
 173        U8 SGLFlags;            /*0x06*//*MPI v2.0 only. Reserved on MPI v2.5*/
 174        U8 MsgFlags;            /*0x07 */
 175        U8 VP_ID;               /*0x08 */
 176        U8 VF_ID;               /*0x09 */
 177        U16 Reserved1;          /*0x0A */
 178        U32 Reserved2;          /*0x0C */
 179        U32 Reserved3;          /*0x10 */
 180        U32 Reserved4;          /*0x14 */
 181        U32 DataLength;         /*0x18 */
 182        U8 CommandFIS[20];      /*0x1C */
 183        MPI2_SATA_PT_SGE_UNION SGL;/*0x30*//*MPI v2.5: IEEE 64 elements only*/
 184} MPI2_SATA_PASSTHROUGH_REQUEST, *PTR_MPI2_SATA_PASSTHROUGH_REQUEST,
 185        Mpi2SataPassthroughRequest_t,
 186        *pMpi2SataPassthroughRequest_t;
 187
 188/*values for PassthroughFlags field */
 189#define MPI2_SATA_PT_REQ_PT_FLAGS_EXECUTE_DIAG      (0x0100)
 190#define MPI2_SATA_PT_REQ_PT_FLAGS_FPDMA             (0x0040)
 191#define MPI2_SATA_PT_REQ_PT_FLAGS_DMA               (0x0020)
 192#define MPI2_SATA_PT_REQ_PT_FLAGS_PIO               (0x0010)
 193#define MPI2_SATA_PT_REQ_PT_FLAGS_UNSPECIFIED_VU    (0x0004)
 194#define MPI2_SATA_PT_REQ_PT_FLAGS_WRITE             (0x0002)
 195#define MPI2_SATA_PT_REQ_PT_FLAGS_READ              (0x0001)
 196
 197/*MPI v2.0: use MPI2_SGLFLAGS_ defines from mpi2.h for the SGLFlags field */
 198
 199/*SATA Passthrough Reply Message */
 200typedef struct _MPI2_SATA_PASSTHROUGH_REPLY {
 201        U16 DevHandle;          /*0x00 */
 202        U8 MsgLength;           /*0x02 */
 203        U8 Function;            /*0x03 */
 204        U16 PassthroughFlags;   /*0x04 */
 205        U8 SGLFlags;            /*0x06 */
 206        U8 MsgFlags;            /*0x07 */
 207        U8 VP_ID;               /*0x08 */
 208        U8 VF_ID;               /*0x09 */
 209        U16 Reserved1;          /*0x0A */
 210        U8 Reserved2;           /*0x0C */
 211        U8 SASStatus;           /*0x0D */
 212        U16 IOCStatus;          /*0x0E */
 213        U32 IOCLogInfo;         /*0x10 */
 214        U8 StatusFIS[20];       /*0x14 */
 215        U32 StatusControlRegisters;     /*0x28 */
 216        U32 TransferCount;      /*0x2C */
 217} MPI2_SATA_PASSTHROUGH_REPLY, *PTR_MPI2_SATA_PASSTHROUGH_REPLY,
 218        Mpi2SataPassthroughReply_t, *pMpi2SataPassthroughReply_t;
 219
 220/*values for SASStatus field are at the top of this file */
 221
 222/****************************************************************************
 223* SAS IO Unit Control messages
 224* (MPI v2.5 and earlier only.
 225* Replaced by IO Unit Control messages in MPI v2.6 and later.)
 226****************************************************************************/
 227
 228/*SAS IO Unit Control Request Message */
 229typedef struct _MPI2_SAS_IOUNIT_CONTROL_REQUEST {
 230        U8 Operation;           /*0x00 */
 231        U8 Reserved1;           /*0x01 */
 232        U8 ChainOffset;         /*0x02 */
 233        U8 Function;            /*0x03 */
 234        U16 DevHandle;          /*0x04 */
 235        U8 IOCParameter;        /*0x06 */
 236        U8 MsgFlags;            /*0x07 */
 237        U8 VP_ID;               /*0x08 */
 238        U8 VF_ID;               /*0x09 */
 239        U16 Reserved3;          /*0x0A */
 240        U16 Reserved4;          /*0x0C */
 241        U8 PhyNum;              /*0x0E */
 242        U8 PrimFlags;           /*0x0F */
 243        U32 Primitive;          /*0x10 */
 244        U8 LookupMethod;        /*0x14 */
 245        U8 Reserved5;           /*0x15 */
 246        U16 SlotNumber;         /*0x16 */
 247        U64 LookupAddress;      /*0x18 */
 248        U32 IOCParameterValue;  /*0x20 */
 249        U32 Reserved7;          /*0x24 */
 250        U32 Reserved8;          /*0x28 */
 251} MPI2_SAS_IOUNIT_CONTROL_REQUEST,
 252        *PTR_MPI2_SAS_IOUNIT_CONTROL_REQUEST,
 253        Mpi2SasIoUnitControlRequest_t,
 254        *pMpi2SasIoUnitControlRequest_t;
 255
 256/*values for the Operation field */
 257#define MPI2_SAS_OP_CLEAR_ALL_PERSISTENT        (0x02)
 258#define MPI2_SAS_OP_PHY_LINK_RESET              (0x06)
 259#define MPI2_SAS_OP_PHY_HARD_RESET              (0x07)
 260#define MPI2_SAS_OP_PHY_CLEAR_ERROR_LOG         (0x08)
 261#define MPI2_SAS_OP_SEND_PRIMITIVE              (0x0A)
 262#define MPI2_SAS_OP_FORCE_FULL_DISCOVERY        (0x0B)
 263#define MPI2_SAS_OP_TRANSMIT_PORT_SELECT_SIGNAL (0x0C) /* MPI v2.0 only */
 264#define MPI2_SAS_OP_REMOVE_DEVICE               (0x0D)
 265#define MPI2_SAS_OP_LOOKUP_MAPPING              (0x0E)
 266#define MPI2_SAS_OP_SET_IOC_PARAMETER           (0x0F)
 267#define MPI25_SAS_OP_ENABLE_FP_DEVICE           (0x10)
 268#define MPI25_SAS_OP_DISABLE_FP_DEVICE          (0x11)
 269#define MPI25_SAS_OP_ENABLE_FP_ALL              (0x12)
 270#define MPI25_SAS_OP_DISABLE_FP_ALL             (0x13)
 271#define MPI2_SAS_OP_DEV_ENABLE_NCQ              (0x14)
 272#define MPI2_SAS_OP_DEV_DISABLE_NCQ             (0x15)
 273#define MPI2_SAS_OP_PRODUCT_SPECIFIC_MIN        (0x80)
 274
 275/*values for the PrimFlags field */
 276#define MPI2_SAS_PRIMFLAGS_SINGLE               (0x08)
 277#define MPI2_SAS_PRIMFLAGS_TRIPLE               (0x02)
 278#define MPI2_SAS_PRIMFLAGS_REDUNDANT            (0x01)
 279
 280/*values for the LookupMethod field */
 281#define MPI2_SAS_LOOKUP_METHOD_SAS_ADDRESS          (0x01)
 282#define MPI2_SAS_LOOKUP_METHOD_SAS_ENCLOSURE_SLOT   (0x02)
 283#define MPI2_SAS_LOOKUP_METHOD_SAS_DEVICE_NAME      (0x03)
 284
 285/*SAS IO Unit Control Reply Message */
 286typedef struct _MPI2_SAS_IOUNIT_CONTROL_REPLY {
 287        U8 Operation;           /*0x00 */
 288        U8 Reserved1;           /*0x01 */
 289        U8 MsgLength;           /*0x02 */
 290        U8 Function;            /*0x03 */
 291        U16 DevHandle;          /*0x04 */
 292        U8 IOCParameter;        /*0x06 */
 293        U8 MsgFlags;            /*0x07 */
 294        U8 VP_ID;               /*0x08 */
 295        U8 VF_ID;               /*0x09 */
 296        U16 Reserved3;          /*0x0A */
 297        U16 Reserved4;          /*0x0C */
 298        U16 IOCStatus;          /*0x0E */
 299        U32 IOCLogInfo;         /*0x10 */
 300} MPI2_SAS_IOUNIT_CONTROL_REPLY,
 301        *PTR_MPI2_SAS_IOUNIT_CONTROL_REPLY,
 302        Mpi2SasIoUnitControlReply_t, *pMpi2SasIoUnitControlReply_t;
 303
 304#endif
 305