1
2
3
4
5
6
7
8
9
10#include <linux/kernel.h>
11#include <linux/blkdev.h>
12#include <linux/cdrom.h>
13#include <linux/ide.h>
14#include <scsi/scsi.h>
15#include "ide-cd.h"
16
17#ifndef CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS
18void ide_cd_log_error(const char *name, struct request *failed_command,
19 struct request_sense *sense)
20{
21
22
23 if (sense->sense_key == UNIT_ATTENTION ||
24 (sense->sense_key == NOT_READY && (sense->asc == 4 ||
25 sense->asc == 0x3a)))
26 return;
27
28 printk(KERN_ERR "%s: error code: 0x%02x sense_key: 0x%02x "
29 "asc: 0x%02x ascq: 0x%02x\n",
30 name, sense->error_code, sense->sense_key,
31 sense->asc, sense->ascq);
32}
33#else
34
35
36static const struct {
37 unsigned short packet_command;
38 const char * const text;
39} packet_command_texts[] = {
40 { GPCMD_TEST_UNIT_READY, "Test Unit Ready" },
41 { GPCMD_REQUEST_SENSE, "Request Sense" },
42 { GPCMD_FORMAT_UNIT, "Format Unit" },
43 { GPCMD_INQUIRY, "Inquiry" },
44 { GPCMD_START_STOP_UNIT, "Start/Stop Unit" },
45 { GPCMD_PREVENT_ALLOW_MEDIUM_REMOVAL, "Prevent/Allow Medium Removal" },
46 { GPCMD_READ_FORMAT_CAPACITIES, "Read Format Capacities" },
47 { GPCMD_READ_CDVD_CAPACITY, "Read Cd/Dvd Capacity" },
48 { GPCMD_READ_10, "Read 10" },
49 { GPCMD_WRITE_10, "Write 10" },
50 { GPCMD_SEEK, "Seek" },
51 { GPCMD_WRITE_AND_VERIFY_10, "Write and Verify 10" },
52 { GPCMD_VERIFY_10, "Verify 10" },
53 { GPCMD_FLUSH_CACHE, "Flush Cache" },
54 { GPCMD_READ_SUBCHANNEL, "Read Subchannel" },
55 { GPCMD_READ_TOC_PMA_ATIP, "Read Table of Contents" },
56 { GPCMD_READ_HEADER, "Read Header" },
57 { GPCMD_PLAY_AUDIO_10, "Play Audio 10" },
58 { GPCMD_GET_CONFIGURATION, "Get Configuration" },
59 { GPCMD_PLAY_AUDIO_MSF, "Play Audio MSF" },
60 { GPCMD_PLAYAUDIO_TI, "Play Audio TrackIndex" },
61 { GPCMD_GET_EVENT_STATUS_NOTIFICATION,
62 "Get Event Status Notification" },
63 { GPCMD_PAUSE_RESUME, "Pause/Resume" },
64 { GPCMD_STOP_PLAY_SCAN, "Stop Play/Scan" },
65 { GPCMD_READ_DISC_INFO, "Read Disc Info" },
66 { GPCMD_READ_TRACK_RZONE_INFO, "Read Track Rzone Info" },
67 { GPCMD_RESERVE_RZONE_TRACK, "Reserve Rzone Track" },
68 { GPCMD_SEND_OPC, "Send OPC" },
69 { GPCMD_MODE_SELECT_10, "Mode Select 10" },
70 { GPCMD_REPAIR_RZONE_TRACK, "Repair Rzone Track" },
71 { GPCMD_MODE_SENSE_10, "Mode Sense 10" },
72 { GPCMD_CLOSE_TRACK, "Close Track" },
73 { GPCMD_BLANK, "Blank" },
74 { GPCMD_SEND_EVENT, "Send Event" },
75 { GPCMD_SEND_KEY, "Send Key" },
76 { GPCMD_REPORT_KEY, "Report Key" },
77 { GPCMD_LOAD_UNLOAD, "Load/Unload" },
78 { GPCMD_SET_READ_AHEAD, "Set Read-ahead" },
79 { GPCMD_READ_12, "Read 12" },
80 { GPCMD_GET_PERFORMANCE, "Get Performance" },
81 { GPCMD_SEND_DVD_STRUCTURE, "Send DVD Structure" },
82 { GPCMD_READ_DVD_STRUCTURE, "Read DVD Structure" },
83 { GPCMD_SET_STREAMING, "Set Streaming" },
84 { GPCMD_READ_CD_MSF, "Read CD MSF" },
85 { GPCMD_SCAN, "Scan" },
86 { GPCMD_SET_SPEED, "Set Speed" },
87 { GPCMD_PLAY_CD, "Play CD" },
88 { GPCMD_MECHANISM_STATUS, "Mechanism Status" },
89 { GPCMD_READ_CD, "Read CD" },
90};
91
92
93static const char * const sense_key_texts[16] = {
94 "No sense data",
95 "Recovered error",
96 "Not ready",
97 "Medium error",
98 "Hardware error",
99 "Illegal request",
100 "Unit attention",
101 "Data protect",
102 "Blank check",
103 "(reserved)",
104 "(reserved)",
105 "Aborted command",
106 "(reserved)",
107 "(reserved)",
108 "Miscompare",
109 "(reserved)",
110};
111
112
113static const struct {
114 unsigned long asc_ascq;
115 const char * const text;
116} sense_data_texts[] = {
117 { 0x000000, "No additional sense information" },
118 { 0x000011, "Play operation in progress" },
119 { 0x000012, "Play operation paused" },
120 { 0x000013, "Play operation successfully completed" },
121 { 0x000014, "Play operation stopped due to error" },
122 { 0x000015, "No current audio status to return" },
123 { 0x010c0a, "Write error - padding blocks added" },
124 { 0x011700, "Recovered data with no error correction applied" },
125 { 0x011701, "Recovered data with retries" },
126 { 0x011702, "Recovered data with positive head offset" },
127 { 0x011703, "Recovered data with negative head offset" },
128 { 0x011704, "Recovered data with retries and/or CIRC applied" },
129 { 0x011705, "Recovered data using previous sector ID" },
130 { 0x011800, "Recovered data with error correction applied" },
131 { 0x011801, "Recovered data with error correction and retries applied"},
132 { 0x011802, "Recovered data - the data was auto-reallocated" },
133 { 0x011803, "Recovered data with CIRC" },
134 { 0x011804, "Recovered data with L-EC" },
135 { 0x015d00, "Failure prediction threshold exceeded"
136 " - Predicted logical unit failure" },
137 { 0x015d01, "Failure prediction threshold exceeded"
138 " - Predicted media failure" },
139 { 0x015dff, "Failure prediction threshold exceeded - False" },
140 { 0x017301, "Power calibration area almost full" },
141 { 0x020400, "Logical unit not ready - cause not reportable" },
142
143 { 0x020401, "Logical unit not ready"
144 " - in progress [sic] of becoming ready" },
145 { 0x020402, "Logical unit not ready - initializing command required" },
146 { 0x020403, "Logical unit not ready - manual intervention required" },
147 { 0x020404, "Logical unit not ready - format in progress" },
148 { 0x020407, "Logical unit not ready - operation in progress" },
149 { 0x020408, "Logical unit not ready - long write in progress" },
150 { 0x020600, "No reference position found (media may be upside down)" },
151 { 0x023000, "Incompatible medium installed" },
152 { 0x023a00, "Medium not present" },
153 { 0x025300, "Media load or eject failed" },
154 { 0x025700, "Unable to recover table of contents" },
155 { 0x030300, "Peripheral device write fault" },
156 { 0x030301, "No write current" },
157 { 0x030302, "Excessive write errors" },
158 { 0x030c00, "Write error" },
159 { 0x030c01, "Write error - Recovered with auto reallocation" },
160 { 0x030c02, "Write error - auto reallocation failed" },
161 { 0x030c03, "Write error - recommend reassignment" },
162 { 0x030c04, "Compression check miscompare error" },
163 { 0x030c05, "Data expansion occurred during compress" },
164 { 0x030c06, "Block not compressible" },
165 { 0x030c07, "Write error - recovery needed" },
166 { 0x030c08, "Write error - recovery failed" },
167 { 0x030c09, "Write error - loss of streaming" },
168 { 0x031100, "Unrecovered read error" },
169 { 0x031106, "CIRC unrecovered error" },
170 { 0x033101, "Format command failed" },
171 { 0x033200, "No defect spare location available" },
172 { 0x033201, "Defect list update failure" },
173 { 0x035100, "Erase failure" },
174 { 0x037200, "Session fixation error" },
175 { 0x037201, "Session fixation error writin lead-in" },
176 { 0x037202, "Session fixation error writin lead-out" },
177 { 0x037300, "CD control error" },
178 { 0x037302, "Power calibration area is full" },
179 { 0x037303, "Power calibration area error" },
180 { 0x037304, "Program memory area / RMA update failure" },
181 { 0x037305, "Program memory area / RMA is full" },
182 { 0x037306, "Program memory area / RMA is (almost) full" },
183 { 0x040200, "No seek complete" },
184 { 0x040300, "Write fault" },
185 { 0x040900, "Track following error" },
186 { 0x040901, "Tracking servo failure" },
187 { 0x040902, "Focus servo failure" },
188 { 0x040903, "Spindle servo failure" },
189 { 0x041500, "Random positioning error" },
190 { 0x041501, "Mechanical positioning or changer error" },
191 { 0x041502, "Positioning error detected by read of medium" },
192 { 0x043c00, "Mechanical positioning or changer error" },
193 { 0x044000, "Diagnostic failure on component (ASCQ)" },
194 { 0x044400, "Internal CD/DVD logical unit failure" },
195 { 0x04b600, "Media load mechanism failed" },
196 { 0x051a00, "Parameter list length error" },
197 { 0x052000, "Invalid command operation code" },
198 { 0x052100, "Logical block address out of range" },
199 { 0x052102, "Invalid address for write" },
200 { 0x052400, "Invalid field in command packet" },
201 { 0x052600, "Invalid field in parameter list" },
202 { 0x052601, "Parameter not supported" },
203 { 0x052602, "Parameter value invalid" },
204 { 0x052700, "Write protected media" },
205 { 0x052c00, "Command sequence error" },
206 { 0x052c03, "Current program area is not empty" },
207 { 0x052c04, "Current program area is empty" },
208 { 0x053001, "Cannot read medium - unknown format" },
209 { 0x053002, "Cannot read medium - incompatible format" },
210 { 0x053900, "Saving parameters not supported" },
211 { 0x054e00, "Overlapped commands attempted" },
212 { 0x055302, "Medium removal prevented" },
213 { 0x055500, "System resource failure" },
214 { 0x056300, "End of user area encountered on this track" },
215 { 0x056400, "Illegal mode for this track or incompatible medium" },
216 { 0x056f00, "Copy protection key exchange failure"
217 " - Authentication failure" },
218 { 0x056f01, "Copy protection key exchange failure - Key not present" },
219 { 0x056f02, "Copy protection key exchange failure"
220 " - Key not established" },
221 { 0x056f03, "Read of scrambled sector without authentication" },
222 { 0x056f04, "Media region code is mismatched to logical unit" },
223 { 0x056f05, "Drive region must be permanent"
224 " / region reset count error" },
225 { 0x057203, "Session fixation error - incomplete track in session" },
226 { 0x057204, "Empty or partially written reserved track" },
227 { 0x057205, "No more RZONE reservations are allowed" },
228 { 0x05bf00, "Loss of streaming" },
229 { 0x062800, "Not ready to ready transition, medium may have changed" },
230 { 0x062900, "Power on, reset or hardware reset occurred" },
231 { 0x062a00, "Parameters changed" },
232 { 0x062a01, "Mode parameters changed" },
233 { 0x062e00, "Insufficient time for operation" },
234 { 0x063f00, "Logical unit operating conditions have changed" },
235 { 0x063f01, "Microcode has been changed" },
236 { 0x065a00, "Operator request or state change input (unspecified)" },
237 { 0x065a01, "Operator medium removal request" },
238 { 0x0bb900, "Play operation aborted" },
239
240
241 { 0xff0401, "Logical unit is in process of becoming ready" },
242 { 0xff0400, "Logical unit not ready, cause not reportable" },
243 { 0xff0402, "Logical unit not ready, initializing command required" },
244 { 0xff0403, "Logical unit not ready, manual intervention required" },
245 { 0xff0500, "Logical unit does not respond to selection" },
246 { 0xff0800, "Logical unit communication failure" },
247 { 0xff0802, "Logical unit communication parity error" },
248 { 0xff0801, "Logical unit communication time-out" },
249 { 0xff2500, "Logical unit not supported" },
250 { 0xff4c00, "Logical unit failed self-configuration" },
251 { 0xff3e00, "Logical unit has not self-configured yet" },
252};
253
254void ide_cd_log_error(const char *name, struct request *failed_command,
255 struct request_sense *sense)
256{
257 int i;
258 const char *s = "bad sense key!";
259 char buf[80];
260
261 printk(KERN_ERR "ATAPI device %s:\n", name);
262 if (sense->error_code == 0x70)
263 printk(KERN_CONT " Error: ");
264 else if (sense->error_code == 0x71)
265 printk(" Deferred Error: ");
266 else if (sense->error_code == 0x7f)
267 printk(KERN_CONT " Vendor-specific Error: ");
268 else
269 printk(KERN_CONT " Unknown Error Type: ");
270
271 if (sense->sense_key < ARRAY_SIZE(sense_key_texts))
272 s = sense_key_texts[sense->sense_key];
273
274 printk(KERN_CONT "%s -- (Sense key=0x%02x)\n", s, sense->sense_key);
275
276 if (sense->asc == 0x40) {
277 sprintf(buf, "Diagnostic failure on component 0x%02x",
278 sense->ascq);
279 s = buf;
280 } else {
281 int lo = 0, mid, hi = ARRAY_SIZE(sense_data_texts);
282 unsigned long key = (sense->sense_key << 16);
283
284 key |= (sense->asc << 8);
285 if (!(sense->ascq >= 0x80 && sense->ascq <= 0xdd))
286 key |= sense->ascq;
287 s = NULL;
288
289 while (hi > lo) {
290 mid = (lo + hi) / 2;
291 if (sense_data_texts[mid].asc_ascq == key ||
292 sense_data_texts[mid].asc_ascq == (0xff0000|key)) {
293 s = sense_data_texts[mid].text;
294 break;
295 } else if (sense_data_texts[mid].asc_ascq > key)
296 hi = mid;
297 else
298 lo = mid + 1;
299 }
300 }
301
302 if (s == NULL) {
303 if (sense->asc > 0x80)
304 s = "(vendor-specific error)";
305 else
306 s = "(reserved error code)";
307 }
308
309 printk(KERN_ERR " %s -- (asc=0x%02x, ascq=0x%02x)\n",
310 s, sense->asc, sense->ascq);
311
312 if (failed_command != NULL) {
313 int lo = 0, mid, hi = ARRAY_SIZE(packet_command_texts);
314 s = NULL;
315
316 while (hi > lo) {
317 mid = (lo + hi) / 2;
318 if (packet_command_texts[mid].packet_command ==
319 scsi_req(failed_command)->cmd[0]) {
320 s = packet_command_texts[mid].text;
321 break;
322 }
323 if (packet_command_texts[mid].packet_command >
324 scsi_req(failed_command)->cmd[0])
325 hi = mid;
326 else
327 lo = mid + 1;
328 }
329
330 printk(KERN_ERR " The failed \"%s\" packet command "
331 "was: \n \"", s);
332 for (i = 0; i < BLK_MAX_CDB; i++)
333 printk(KERN_CONT "%02x ", scsi_req(failed_command)->cmd[i]);
334 printk(KERN_CONT "\"\n");
335 }
336
337
338
339
340
341
342 if (sense->sense_key == NOT_READY && (sense->sks[0] & 0x80)) {
343 int progress = (sense->sks[1] << 8 | sense->sks[2]) * 100;
344
345 printk(KERN_ERR " Command is %02d%% complete\n",
346 progress / 0xffff);
347 }
348
349 if (sense->sense_key == ILLEGAL_REQUEST &&
350 (sense->sks[0] & 0x80) != 0) {
351 printk(KERN_ERR " Error in %s byte %d",
352 (sense->sks[0] & 0x40) != 0 ?
353 "command packet" : "command data",
354 (sense->sks[1] << 8) + sense->sks[2]);
355
356 if ((sense->sks[0] & 0x40) != 0)
357 printk(KERN_CONT " bit %d", sense->sks[0] & 0x07);
358
359 printk(KERN_CONT "\n");
360 }
361}
362#endif
363
