1/* SPDX-License-Identifier: GPL-2.0 */ 2/* $Id: xdi_msg.h,v 1.1.2.2 2001/02/16 08:40:36 armin Exp $ */ 3 4#ifndef __DIVA_XDI_UM_CFG_MESSAGE_H__ 5#define __DIVA_XDI_UM_CFG_MESSAGE_H__ 6 7/* 8 Definition of messages used to communicate between 9 XDI device driver and user mode configuration utility 10*/ 11 12/* 13 As acknowledge one DWORD - card ordinal will be read from the card 14*/ 15#define DIVA_XDI_UM_CMD_GET_CARD_ORDINAL 0 16 17/* 18 no acknowledge will be generated, memory block will be written in the 19 memory at given offset 20*/ 21#define DIVA_XDI_UM_CMD_WRITE_SDRAM_BLOCK 1 22 23/* 24 no acknowledge will be genatated, FPGA will be programmed 25*/ 26#define DIVA_XDI_UM_CMD_WRITE_FPGA 2 27 28/* 29 As acknowledge block of SDRAM will be read in the user buffer 30*/ 31#define DIVA_XDI_UM_CMD_READ_SDRAM 3 32 33/* 34 As acknowledge dword with serial number will be read in the user buffer 35*/ 36#define DIVA_XDI_UM_CMD_GET_SERIAL_NR 4 37 38/* 39 As acknowledge struct consisting from 9 dwords with PCI info. 40 dword[0...7] = 8 PCI BARS 41 dword[9] = IRQ 42*/ 43#define DIVA_XDI_UM_CMD_GET_PCI_HW_CONFIG 5 44 45/* 46 Reset of the board + activation of primary 47 boot loader 48*/ 49#define DIVA_XDI_UM_CMD_RESET_ADAPTER 6 50 51/* 52 Called after code download to start adapter 53 at specified address 54 Start does set new set of features due to fact that we not know 55 if protocol features have changed 56*/ 57#define DIVA_XDI_UM_CMD_START_ADAPTER 7 58 59/* 60 Stop adapter, called if user 61 wishes to stop adapter without unload 62 of the driver, to reload adapter with 63 different protocol 64*/ 65#define DIVA_XDI_UM_CMD_STOP_ADAPTER 8 66 67/* 68 Get state of current adapter 69 Acknowledge is one dword with following values: 70 0 - adapter ready for download 71 1 - adapter running 72 2 - adapter dead 73 3 - out of service, driver should be restarted or hardware problem 74*/ 75#define DIVA_XDI_UM_CMD_GET_CARD_STATE 9 76 77/* 78 Reads XLOG entry from the card 79*/ 80#define DIVA_XDI_UM_CMD_READ_XLOG_ENTRY 10 81 82/* 83 Set untranslated protocol code features 84*/ 85#define DIVA_XDI_UM_CMD_SET_PROTOCOL_FEATURES 11 86 87typedef struct _diva_xdi_um_cfg_cmd_data_set_features { 88 dword features; 89} diva_xdi_um_cfg_cmd_data_set_features_t; 90 91typedef struct _diva_xdi_um_cfg_cmd_data_start { 92 dword offset; 93 dword features; 94} diva_xdi_um_cfg_cmd_data_start_t; 95 96typedef struct _diva_xdi_um_cfg_cmd_data_write_sdram { 97 dword ram_number; 98 dword offset; 99 dword length; 100} diva_xdi_um_cfg_cmd_data_write_sdram_t; 101 102typedef struct _diva_xdi_um_cfg_cmd_data_write_fpga { 103 dword fpga_number; 104 dword image_length; 105} diva_xdi_um_cfg_cmd_data_write_fpga_t; 106 107typedef struct _diva_xdi_um_cfg_cmd_data_read_sdram { 108 dword ram_number; 109 dword offset; 110 dword length; 111} diva_xdi_um_cfg_cmd_data_read_sdram_t; 112 113typedef union _diva_xdi_um_cfg_cmd_data { 114 diva_xdi_um_cfg_cmd_data_write_sdram_t write_sdram; 115 diva_xdi_um_cfg_cmd_data_write_fpga_t write_fpga; 116 diva_xdi_um_cfg_cmd_data_read_sdram_t read_sdram; 117 diva_xdi_um_cfg_cmd_data_start_t start; 118 diva_xdi_um_cfg_cmd_data_set_features_t features; 119} diva_xdi_um_cfg_cmd_data_t; 120 121typedef struct _diva_xdi_um_cfg_cmd { 122 dword adapter; /* Adapter number 1...N */ 123 dword command; 124 diva_xdi_um_cfg_cmd_data_t command_data; 125 dword data_length; /* Plain binary data will follow */ 126} diva_xdi_um_cfg_cmd_t; 127 128#endif 129