linux/drivers/net/ethernet/intel/e1000e/manage.c
<<
>>
Prefs
   1/* Intel PRO/1000 Linux driver
   2 * Copyright(c) 1999 - 2015 Intel Corporation.
   3 *
   4 * This program is free software; you can redistribute it and/or modify it
   5 * under the terms and conditions of the GNU General Public License,
   6 * version 2, as published by the Free Software Foundation.
   7 *
   8 * This program is distributed in the hope it will be useful, but WITHOUT
   9 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
  10 * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
  11 * more details.
  12 *
  13 * The full GNU General Public License is included in this distribution in
  14 * the file called "COPYING".
  15 *
  16 * Contact Information:
  17 * Linux NICS <linux.nics@intel.com>
  18 * e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
  19 * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
  20 */
  21
  22#include "e1000.h"
  23
  24/**
  25 *  e1000_calculate_checksum - Calculate checksum for buffer
  26 *  @buffer: pointer to EEPROM
  27 *  @length: size of EEPROM to calculate a checksum for
  28 *
  29 *  Calculates the checksum for some buffer on a specified length.  The
  30 *  checksum calculated is returned.
  31 **/
  32static u8 e1000_calculate_checksum(u8 *buffer, u32 length)
  33{
  34        u32 i;
  35        u8 sum = 0;
  36
  37        if (!buffer)
  38                return 0;
  39
  40        for (i = 0; i < length; i++)
  41                sum += buffer[i];
  42
  43        return (u8)(0 - sum);
  44}
  45
  46/**
  47 *  e1000_mng_enable_host_if - Checks host interface is enabled
  48 *  @hw: pointer to the HW structure
  49 *
  50 *  Returns 0 upon success, else -E1000_ERR_HOST_INTERFACE_COMMAND
  51 *
  52 *  This function checks whether the HOST IF is enabled for command operation
  53 *  and also checks whether the previous command is completed.  It busy waits
  54 *  in case of previous command is not completed.
  55 **/
  56static s32 e1000_mng_enable_host_if(struct e1000_hw *hw)
  57{
  58        u32 hicr;
  59        u8 i;
  60
  61        if (!hw->mac.arc_subsystem_valid) {
  62                e_dbg("ARC subsystem not valid.\n");
  63                return -E1000_ERR_HOST_INTERFACE_COMMAND;
  64        }
  65
  66        /* Check that the host interface is enabled. */
  67        hicr = er32(HICR);
  68        if (!(hicr & E1000_HICR_EN)) {
  69                e_dbg("E1000_HOST_EN bit disabled.\n");
  70                return -E1000_ERR_HOST_INTERFACE_COMMAND;
  71        }
  72        /* check the previous command is completed */
  73        for (i = 0; i < E1000_MNG_DHCP_COMMAND_TIMEOUT; i++) {
  74                hicr = er32(HICR);
  75                if (!(hicr & E1000_HICR_C))
  76                        break;
  77                mdelay(1);
  78        }
  79
  80        if (i == E1000_MNG_DHCP_COMMAND_TIMEOUT) {
  81                e_dbg("Previous command timeout failed.\n");
  82                return -E1000_ERR_HOST_INTERFACE_COMMAND;
  83        }
  84
  85        return 0;
  86}
  87
  88/**
  89 *  e1000e_check_mng_mode_generic - Generic check management mode
  90 *  @hw: pointer to the HW structure
  91 *
  92 *  Reads the firmware semaphore register and returns true (>0) if
  93 *  manageability is enabled, else false (0).
  94 **/
  95bool e1000e_check_mng_mode_generic(struct e1000_hw *hw)
  96{
  97        u32 fwsm = er32(FWSM);
  98
  99        return (fwsm & E1000_FWSM_MODE_MASK) ==
 100            (E1000_MNG_IAMT_MODE << E1000_FWSM_MODE_SHIFT);
 101}
 102
 103/**
 104 *  e1000e_enable_tx_pkt_filtering - Enable packet filtering on Tx
 105 *  @hw: pointer to the HW structure
 106 *
 107 *  Enables packet filtering on transmit packets if manageability is enabled
 108 *  and host interface is enabled.
 109 **/
 110bool e1000e_enable_tx_pkt_filtering(struct e1000_hw *hw)
 111{
 112        struct e1000_host_mng_dhcp_cookie *hdr = &hw->mng_cookie;
 113        u32 *buffer = (u32 *)&hw->mng_cookie;
 114        u32 offset;
 115        s32 ret_val, hdr_csum, csum;
 116        u8 i, len;
 117
 118        hw->mac.tx_pkt_filtering = true;
 119
 120        /* No manageability, no filtering */
 121        if (!hw->mac.ops.check_mng_mode(hw)) {
 122                hw->mac.tx_pkt_filtering = false;
 123                return hw->mac.tx_pkt_filtering;
 124        }
 125
 126        /* If we can't read from the host interface for whatever
 127         * reason, disable filtering.
 128         */
 129        ret_val = e1000_mng_enable_host_if(hw);
 130        if (ret_val) {
 131                hw->mac.tx_pkt_filtering = false;
 132                return hw->mac.tx_pkt_filtering;
 133        }
 134
 135        /* Read in the header.  Length and offset are in dwords. */
 136        len = E1000_MNG_DHCP_COOKIE_LENGTH >> 2;
 137        offset = E1000_MNG_DHCP_COOKIE_OFFSET >> 2;
 138        for (i = 0; i < len; i++)
 139                *(buffer + i) = E1000_READ_REG_ARRAY(hw, E1000_HOST_IF,
 140                                                     offset + i);
 141        hdr_csum = hdr->checksum;
 142        hdr->checksum = 0;
 143        csum = e1000_calculate_checksum((u8 *)hdr,
 144                                        E1000_MNG_DHCP_COOKIE_LENGTH);
 145        /* If either the checksums or signature don't match, then
 146         * the cookie area isn't considered valid, in which case we
 147         * take the safe route of assuming Tx filtering is enabled.
 148         */
 149        if ((hdr_csum != csum) || (hdr->signature != E1000_IAMT_SIGNATURE)) {
 150                hw->mac.tx_pkt_filtering = true;
 151                return hw->mac.tx_pkt_filtering;
 152        }
 153
 154        /* Cookie area is valid, make the final check for filtering. */
 155        if (!(hdr->status & E1000_MNG_DHCP_COOKIE_STATUS_PARSING))
 156                hw->mac.tx_pkt_filtering = false;
 157
 158        return hw->mac.tx_pkt_filtering;
 159}
 160
 161/**
 162 *  e1000_mng_write_cmd_header - Writes manageability command header
 163 *  @hw: pointer to the HW structure
 164 *  @hdr: pointer to the host interface command header
 165 *
 166 *  Writes the command header after does the checksum calculation.
 167 **/
 168static s32 e1000_mng_write_cmd_header(struct e1000_hw *hw,
 169                                      struct e1000_host_mng_command_header *hdr)
 170{
 171        u16 i, length = sizeof(struct e1000_host_mng_command_header);
 172
 173        /* Write the whole command header structure with new checksum. */
 174
 175        hdr->checksum = e1000_calculate_checksum((u8 *)hdr, length);
 176
 177        length >>= 2;
 178        /* Write the relevant command block into the ram area. */
 179        for (i = 0; i < length; i++) {
 180                E1000_WRITE_REG_ARRAY(hw, E1000_HOST_IF, i, *((u32 *)hdr + i));
 181                e1e_flush();
 182        }
 183
 184        return 0;
 185}
 186
 187/**
 188 *  e1000_mng_host_if_write - Write to the manageability host interface
 189 *  @hw: pointer to the HW structure
 190 *  @buffer: pointer to the host interface buffer
 191 *  @length: size of the buffer
 192 *  @offset: location in the buffer to write to
 193 *  @sum: sum of the data (not checksum)
 194 *
 195 *  This function writes the buffer content at the offset given on the host if.
 196 *  It also does alignment considerations to do the writes in most efficient
 197 *  way.  Also fills up the sum of the buffer in *buffer parameter.
 198 **/
 199static s32 e1000_mng_host_if_write(struct e1000_hw *hw, u8 *buffer,
 200                                   u16 length, u16 offset, u8 *sum)
 201{
 202        u8 *tmp;
 203        u8 *bufptr = buffer;
 204        u32 data = 0;
 205        u16 remaining, i, j, prev_bytes;
 206
 207        /* sum = only sum of the data and it is not checksum */
 208
 209        if (length == 0 || offset + length > E1000_HI_MAX_MNG_DATA_LENGTH)
 210                return -E1000_ERR_PARAM;
 211
 212        tmp = (u8 *)&data;
 213        prev_bytes = offset & 0x3;
 214        offset >>= 2;
 215
 216        if (prev_bytes) {
 217                data = E1000_READ_REG_ARRAY(hw, E1000_HOST_IF, offset);
 218                for (j = prev_bytes; j < sizeof(u32); j++) {
 219                        *(tmp + j) = *bufptr++;
 220                        *sum += *(tmp + j);
 221                }
 222                E1000_WRITE_REG_ARRAY(hw, E1000_HOST_IF, offset, data);
 223                length -= j - prev_bytes;
 224                offset++;
 225        }
 226
 227        remaining = length & 0x3;
 228        length -= remaining;
 229
 230        /* Calculate length in DWORDs */
 231        length >>= 2;
 232
 233        /* The device driver writes the relevant command block into the
 234         * ram area.
 235         */
 236        for (i = 0; i < length; i++) {
 237                for (j = 0; j < sizeof(u32); j++) {
 238                        *(tmp + j) = *bufptr++;
 239                        *sum += *(tmp + j);
 240                }
 241
 242                E1000_WRITE_REG_ARRAY(hw, E1000_HOST_IF, offset + i, data);
 243        }
 244        if (remaining) {
 245                for (j = 0; j < sizeof(u32); j++) {
 246                        if (j < remaining)
 247                                *(tmp + j) = *bufptr++;
 248                        else
 249                                *(tmp + j) = 0;
 250
 251                        *sum += *(tmp + j);
 252                }
 253                E1000_WRITE_REG_ARRAY(hw, E1000_HOST_IF, offset + i, data);
 254        }
 255
 256        return 0;
 257}
 258
 259/**
 260 *  e1000e_mng_write_dhcp_info - Writes DHCP info to host interface
 261 *  @hw: pointer to the HW structure
 262 *  @buffer: pointer to the host interface
 263 *  @length: size of the buffer
 264 *
 265 *  Writes the DHCP information to the host interface.
 266 **/
 267s32 e1000e_mng_write_dhcp_info(struct e1000_hw *hw, u8 *buffer, u16 length)
 268{
 269        struct e1000_host_mng_command_header hdr;
 270        s32 ret_val;
 271        u32 hicr;
 272
 273        hdr.command_id = E1000_MNG_DHCP_TX_PAYLOAD_CMD;
 274        hdr.command_length = length;
 275        hdr.reserved1 = 0;
 276        hdr.reserved2 = 0;
 277        hdr.checksum = 0;
 278
 279        /* Enable the host interface */
 280        ret_val = e1000_mng_enable_host_if(hw);
 281        if (ret_val)
 282                return ret_val;
 283
 284        /* Populate the host interface with the contents of "buffer". */
 285        ret_val = e1000_mng_host_if_write(hw, buffer, length,
 286                                          sizeof(hdr), &(hdr.checksum));
 287        if (ret_val)
 288                return ret_val;
 289
 290        /* Write the manageability command header */
 291        ret_val = e1000_mng_write_cmd_header(hw, &hdr);
 292        if (ret_val)
 293                return ret_val;
 294
 295        /* Tell the ARC a new command is pending. */
 296        hicr = er32(HICR);
 297        ew32(HICR, hicr | E1000_HICR_C);
 298
 299        return 0;
 300}
 301
 302/**
 303 *  e1000e_enable_mng_pass_thru - Check if management passthrough is needed
 304 *  @hw: pointer to the HW structure
 305 *
 306 *  Verifies the hardware needs to leave interface enabled so that frames can
 307 *  be directed to and from the management interface.
 308 **/
 309bool e1000e_enable_mng_pass_thru(struct e1000_hw *hw)
 310{
 311        u32 manc;
 312        u32 fwsm, factps;
 313
 314        manc = er32(MANC);
 315
 316        if (!(manc & E1000_MANC_RCV_TCO_EN))
 317                return false;
 318
 319        if (hw->mac.has_fwsm) {
 320                fwsm = er32(FWSM);
 321                factps = er32(FACTPS);
 322
 323                if (!(factps & E1000_FACTPS_MNGCG) &&
 324                    ((fwsm & E1000_FWSM_MODE_MASK) ==
 325                     (e1000_mng_mode_pt << E1000_FWSM_MODE_SHIFT)))
 326                        return true;
 327        } else if ((hw->mac.type == e1000_82574) ||
 328                   (hw->mac.type == e1000_82583)) {
 329                u16 data;
 330                s32 ret_val;
 331
 332                factps = er32(FACTPS);
 333                ret_val = e1000_read_nvm(hw, NVM_INIT_CONTROL2_REG, 1, &data);
 334                if (ret_val)
 335                        return false;
 336
 337                if (!(factps & E1000_FACTPS_MNGCG) &&
 338                    ((data & E1000_NVM_INIT_CTRL2_MNGM) ==
 339                     (e1000_mng_mode_pt << 13)))
 340                        return true;
 341        } else if ((manc & E1000_MANC_SMBUS_EN) &&
 342                   !(manc & E1000_MANC_ASF_EN)) {
 343                return true;
 344        }
 345
 346        return false;
 347}
 348