1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20#include <linux/kernel.h>
21#include <linux/module.h>
22#include <linux/of_address.h>
23#include <linux/of_irq.h>
24#include <linux/platform_device.h>
25
26#include "mtu3.h"
27
28static int ep_fifo_alloc(struct mtu3_ep *mep, u32 seg_size)
29{
30 struct mtu3_fifo_info *fifo = mep->fifo;
31 u32 num_bits = DIV_ROUND_UP(seg_size, MTU3_EP_FIFO_UNIT);
32 u32 start_bit;
33
34
35 num_bits = roundup_pow_of_two(num_bits);
36 if (num_bits > fifo->limit)
37 return -EINVAL;
38
39 mep->fifo_seg_size = num_bits * MTU3_EP_FIFO_UNIT;
40 num_bits = num_bits * (mep->slot + 1);
41 start_bit = bitmap_find_next_zero_area(fifo->bitmap,
42 fifo->limit, 0, num_bits, 0);
43 if (start_bit >= fifo->limit)
44 return -EOVERFLOW;
45
46 bitmap_set(fifo->bitmap, start_bit, num_bits);
47 mep->fifo_size = num_bits * MTU3_EP_FIFO_UNIT;
48 mep->fifo_addr = fifo->base + MTU3_EP_FIFO_UNIT * start_bit;
49
50 dev_dbg(mep->mtu->dev, "%s fifo:%#x/%#x, start_bit: %d\n",
51 __func__, mep->fifo_seg_size, mep->fifo_size, start_bit);
52
53 return mep->fifo_addr;
54}
55
56static void ep_fifo_free(struct mtu3_ep *mep)
57{
58 struct mtu3_fifo_info *fifo = mep->fifo;
59 u32 addr = mep->fifo_addr;
60 u32 bits = mep->fifo_size / MTU3_EP_FIFO_UNIT;
61 u32 start_bit;
62
63 if (unlikely(addr < fifo->base || bits > fifo->limit))
64 return;
65
66 start_bit = (addr - fifo->base) / MTU3_EP_FIFO_UNIT;
67 bitmap_clear(fifo->bitmap, start_bit, bits);
68 mep->fifo_size = 0;
69 mep->fifo_seg_size = 0;
70
71 dev_dbg(mep->mtu->dev, "%s size:%#x/%#x, start_bit: %d\n",
72 __func__, mep->fifo_seg_size, mep->fifo_size, start_bit);
73}
74
75
76static inline void mtu3_ss_func_set(struct mtu3 *mtu, bool enable)
77{
78
79 if (enable)
80 mtu3_setbits(mtu->mac_base, U3D_USB3_CONFIG, USB3_EN);
81 else
82 mtu3_clrbits(mtu->mac_base, U3D_USB3_CONFIG, USB3_EN);
83
84 dev_dbg(mtu->dev, "USB3_EN = %d\n", !!enable);
85}
86
87
88static inline void mtu3_hs_softconn_set(struct mtu3 *mtu, bool enable)
89{
90 if (enable) {
91 mtu3_setbits(mtu->mac_base, U3D_POWER_MANAGEMENT,
92 SOFT_CONN | SUSPENDM_ENABLE);
93 } else {
94 mtu3_clrbits(mtu->mac_base, U3D_POWER_MANAGEMENT,
95 SOFT_CONN | SUSPENDM_ENABLE);
96 }
97 dev_dbg(mtu->dev, "SOFTCONN = %d\n", !!enable);
98}
99
100
101static int mtu3_device_enable(struct mtu3 *mtu)
102{
103 void __iomem *ibase = mtu->ippc_base;
104 u32 check_clk = 0;
105
106 mtu3_clrbits(ibase, U3D_SSUSB_IP_PW_CTRL2, SSUSB_IP_DEV_PDN);
107
108 if (mtu->is_u3_ip) {
109 check_clk = SSUSB_U3_MAC_RST_B_STS;
110 mtu3_clrbits(ibase, SSUSB_U3_CTRL(0),
111 (SSUSB_U3_PORT_DIS | SSUSB_U3_PORT_PDN |
112 SSUSB_U3_PORT_HOST_SEL));
113 }
114 mtu3_clrbits(ibase, SSUSB_U2_CTRL(0),
115 (SSUSB_U2_PORT_DIS | SSUSB_U2_PORT_PDN |
116 SSUSB_U2_PORT_HOST_SEL));
117 mtu3_setbits(ibase, SSUSB_U2_CTRL(0), SSUSB_U2_PORT_OTG_SEL);
118
119 return ssusb_check_clocks(mtu->ssusb, check_clk);
120}
121
122static void mtu3_device_disable(struct mtu3 *mtu)
123{
124 void __iomem *ibase = mtu->ippc_base;
125
126 if (mtu->is_u3_ip)
127 mtu3_setbits(ibase, SSUSB_U3_CTRL(0),
128 (SSUSB_U3_PORT_DIS | SSUSB_U3_PORT_PDN));
129
130 mtu3_setbits(ibase, SSUSB_U2_CTRL(0),
131 SSUSB_U2_PORT_DIS | SSUSB_U2_PORT_PDN);
132 mtu3_clrbits(ibase, SSUSB_U2_CTRL(0), SSUSB_U2_PORT_OTG_SEL);
133 mtu3_setbits(ibase, U3D_SSUSB_IP_PW_CTRL2, SSUSB_IP_DEV_PDN);
134}
135
136
137static void mtu3_device_reset(struct mtu3 *mtu)
138{
139 void __iomem *ibase = mtu->ippc_base;
140
141 mtu3_setbits(ibase, U3D_SSUSB_DEV_RST_CTRL, SSUSB_DEV_SW_RST);
142 udelay(1);
143 mtu3_clrbits(ibase, U3D_SSUSB_DEV_RST_CTRL, SSUSB_DEV_SW_RST);
144}
145
146
147static void mtu3_intr_disable(struct mtu3 *mtu)
148{
149 void __iomem *mbase = mtu->mac_base;
150
151
152 mtu3_writel(mbase, U3D_LV1IECR, ~0x0);
153
154 mtu3_writel(mbase, U3D_EPIECR, ~0x0);
155}
156
157static void mtu3_intr_status_clear(struct mtu3 *mtu)
158{
159 void __iomem *mbase = mtu->mac_base;
160
161
162 mtu3_writel(mbase, U3D_EPISR, ~0x0);
163
164 mtu3_writel(mbase, U3D_COMMON_USB_INTR, ~0x0);
165
166 mtu3_writel(mbase, U3D_LTSSM_INTR, ~0x0);
167
168 mtu3_writel(mbase, U3D_DEV_LINK_INTR, ~0x0);
169}
170
171
172static void mtu3_intr_enable(struct mtu3 *mtu)
173{
174 void __iomem *mbase = mtu->mac_base;
175 u32 value;
176
177
178 value = BMU_INTR | QMU_INTR | MAC3_INTR | MAC2_INTR | EP_CTRL_INTR;
179 mtu3_writel(mbase, U3D_LV1IESR, value);
180
181
182 value = SUSPEND_INTR | RESUME_INTR | RESET_INTR;
183 mtu3_writel(mbase, U3D_COMMON_USB_INTR_ENABLE, value);
184
185 if (mtu->is_u3_ip) {
186
187 value = HOT_RST_INTR | WARM_RST_INTR | VBUS_RISE_INTR |
188 VBUS_FALL_INTR | ENTER_U3_INTR | EXIT_U3_INTR;
189 mtu3_writel(mbase, U3D_LTSSM_INTR_ENABLE, value);
190 }
191
192
193 value = TXQ_CSERR_INT | TXQ_LENERR_INT | RXQ_CSERR_INT |
194 RXQ_LENERR_INT | RXQ_ZLPERR_INT;
195 mtu3_writel(mbase, U3D_QIESR1, value);
196
197
198 mtu3_writel(mbase, U3D_DEV_LINK_INTR_ENABLE, SSUSB_DEV_SPEED_CHG_INTR);
199}
200
201
202void mtu3_ep_stall_set(struct mtu3_ep *mep, bool set)
203{
204 struct mtu3 *mtu = mep->mtu;
205 void __iomem *mbase = mtu->mac_base;
206 u8 epnum = mep->epnum;
207 u32 csr;
208
209 if (mep->is_in) {
210 csr = mtu3_readl(mbase, MU3D_EP_TXCR0(epnum)) & TX_W1C_BITS;
211 if (set)
212 csr |= TX_SENDSTALL;
213 else
214 csr = (csr & (~TX_SENDSTALL)) | TX_SENTSTALL;
215 mtu3_writel(mbase, MU3D_EP_TXCR0(epnum), csr);
216 } else {
217 csr = mtu3_readl(mbase, MU3D_EP_RXCR0(epnum)) & RX_W1C_BITS;
218 if (set)
219 csr |= RX_SENDSTALL;
220 else
221 csr = (csr & (~RX_SENDSTALL)) | RX_SENTSTALL;
222 mtu3_writel(mbase, MU3D_EP_RXCR0(epnum), csr);
223 }
224
225 if (!set) {
226 mtu3_setbits(mbase, U3D_EP_RST, EP_RST(mep->is_in, epnum));
227 mtu3_clrbits(mbase, U3D_EP_RST, EP_RST(mep->is_in, epnum));
228 mep->flags &= ~MTU3_EP_STALL;
229 } else {
230 mep->flags |= MTU3_EP_STALL;
231 }
232
233 dev_dbg(mtu->dev, "%s: %s\n", mep->name,
234 set ? "SEND STALL" : "CLEAR STALL, with EP RESET");
235}
236
237void mtu3_dev_on_off(struct mtu3 *mtu, int is_on)
238{
239 if (mtu->is_u3_ip && (mtu->max_speed == USB_SPEED_SUPER))
240 mtu3_ss_func_set(mtu, is_on);
241 else
242 mtu3_hs_softconn_set(mtu, is_on);
243
244 dev_info(mtu->dev, "gadget (%s) pullup D%s\n",
245 usb_speed_string(mtu->max_speed), is_on ? "+" : "-");
246}
247
248void mtu3_start(struct mtu3 *mtu)
249{
250 void __iomem *mbase = mtu->mac_base;
251
252 dev_dbg(mtu->dev, "%s devctl 0x%x\n", __func__,
253 mtu3_readl(mbase, U3D_DEVICE_CONTROL));
254
255 mtu3_clrbits(mtu->ippc_base, U3D_SSUSB_IP_PW_CTRL2, SSUSB_IP_DEV_PDN);
256
257
258
259
260
261
262 if (mtu->max_speed == USB_SPEED_FULL)
263 mtu3_clrbits(mbase, U3D_POWER_MANAGEMENT, HS_ENABLE);
264
265
266 mtu3_intr_enable(mtu);
267 mtu->is_active = 1;
268
269 if (mtu->softconnect)
270 mtu3_dev_on_off(mtu, 1);
271}
272
273void mtu3_stop(struct mtu3 *mtu)
274{
275 dev_dbg(mtu->dev, "%s\n", __func__);
276
277 mtu3_intr_disable(mtu);
278 mtu3_intr_status_clear(mtu);
279
280 if (mtu->softconnect)
281 mtu3_dev_on_off(mtu, 0);
282
283 mtu->is_active = 0;
284 mtu3_setbits(mtu->ippc_base, U3D_SSUSB_IP_PW_CTRL2, SSUSB_IP_DEV_PDN);
285}
286
287
288int mtu3_config_ep(struct mtu3 *mtu, struct mtu3_ep *mep,
289 int interval, int burst, int mult)
290{
291 void __iomem *mbase = mtu->mac_base;
292 int epnum = mep->epnum;
293 u32 csr0, csr1, csr2;
294 int fifo_sgsz, fifo_addr;
295 int num_pkts;
296
297 fifo_addr = ep_fifo_alloc(mep, mep->maxp);
298 if (fifo_addr < 0) {
299 dev_err(mtu->dev, "alloc ep fifo failed(%d)\n", mep->maxp);
300 return -ENOMEM;
301 }
302 fifo_sgsz = ilog2(mep->fifo_seg_size);
303 dev_dbg(mtu->dev, "%s fifosz: %x(%x/%x)\n", __func__, fifo_sgsz,
304 mep->fifo_seg_size, mep->fifo_size);
305
306 if (mep->is_in) {
307 csr0 = TX_TXMAXPKTSZ(mep->maxp);
308 csr0 |= TX_DMAREQEN;
309
310 num_pkts = (burst + 1) * (mult + 1) - 1;
311 csr1 = TX_SS_BURST(burst) | TX_SLOT(mep->slot);
312 csr1 |= TX_MAX_PKT(num_pkts) | TX_MULT(mult);
313
314 csr2 = TX_FIFOADDR(fifo_addr >> 4);
315 csr2 |= TX_FIFOSEGSIZE(fifo_sgsz);
316
317 switch (mep->type) {
318 case USB_ENDPOINT_XFER_BULK:
319 csr1 |= TX_TYPE(TYPE_BULK);
320 break;
321 case USB_ENDPOINT_XFER_ISOC:
322 csr1 |= TX_TYPE(TYPE_ISO);
323 csr2 |= TX_BINTERVAL(interval);
324 break;
325 case USB_ENDPOINT_XFER_INT:
326 csr1 |= TX_TYPE(TYPE_INT);
327 csr2 |= TX_BINTERVAL(interval);
328 break;
329 }
330
331
332 mtu3_setbits(mbase, U3D_QIESR0, QMU_TX_DONE_INT(epnum));
333
334 mtu3_writel(mbase, MU3D_EP_TXCR0(epnum), csr0);
335 mtu3_writel(mbase, MU3D_EP_TXCR1(epnum), csr1);
336 mtu3_writel(mbase, MU3D_EP_TXCR2(epnum), csr2);
337
338 dev_dbg(mtu->dev, "U3D_TX%d CSR0:%#x, CSR1:%#x, CSR2:%#x\n",
339 epnum, mtu3_readl(mbase, MU3D_EP_TXCR0(epnum)),
340 mtu3_readl(mbase, MU3D_EP_TXCR1(epnum)),
341 mtu3_readl(mbase, MU3D_EP_TXCR2(epnum)));
342 } else {
343 csr0 = RX_RXMAXPKTSZ(mep->maxp);
344 csr0 |= RX_DMAREQEN;
345
346 num_pkts = (burst + 1) * (mult + 1) - 1;
347 csr1 = RX_SS_BURST(burst) | RX_SLOT(mep->slot);
348 csr1 |= RX_MAX_PKT(num_pkts) | RX_MULT(mult);
349
350 csr2 = RX_FIFOADDR(fifo_addr >> 4);
351 csr2 |= RX_FIFOSEGSIZE(fifo_sgsz);
352
353 switch (mep->type) {
354 case USB_ENDPOINT_XFER_BULK:
355 csr1 |= RX_TYPE(TYPE_BULK);
356 break;
357 case USB_ENDPOINT_XFER_ISOC:
358 csr1 |= RX_TYPE(TYPE_ISO);
359 csr2 |= RX_BINTERVAL(interval);
360 break;
361 case USB_ENDPOINT_XFER_INT:
362 csr1 |= RX_TYPE(TYPE_INT);
363 csr2 |= RX_BINTERVAL(interval);
364 break;
365 }
366
367
368 mtu3_setbits(mbase, U3D_QIESR0, QMU_RX_DONE_INT(epnum));
369
370 mtu3_writel(mbase, MU3D_EP_RXCR0(epnum), csr0);
371 mtu3_writel(mbase, MU3D_EP_RXCR1(epnum), csr1);
372 mtu3_writel(mbase, MU3D_EP_RXCR2(epnum), csr2);
373
374 dev_dbg(mtu->dev, "U3D_RX%d CSR0:%#x, CSR1:%#x, CSR2:%#x\n",
375 epnum, mtu3_readl(mbase, MU3D_EP_RXCR0(epnum)),
376 mtu3_readl(mbase, MU3D_EP_RXCR1(epnum)),
377 mtu3_readl(mbase, MU3D_EP_RXCR2(epnum)));
378 }
379
380 dev_dbg(mtu->dev, "csr0:%#x, csr1:%#x, csr2:%#x\n", csr0, csr1, csr2);
381 dev_dbg(mtu->dev, "%s: %s, fifo-addr:%#x, fifo-size:%#x(%#x/%#x)\n",
382 __func__, mep->name, mep->fifo_addr, mep->fifo_size,
383 fifo_sgsz, mep->fifo_seg_size);
384
385 return 0;
386}
387
388
389void mtu3_deconfig_ep(struct mtu3 *mtu, struct mtu3_ep *mep)
390{
391 void __iomem *mbase = mtu->mac_base;
392 int epnum = mep->epnum;
393
394 if (mep->is_in) {
395 mtu3_writel(mbase, MU3D_EP_TXCR0(epnum), 0);
396 mtu3_writel(mbase, MU3D_EP_TXCR1(epnum), 0);
397 mtu3_writel(mbase, MU3D_EP_TXCR2(epnum), 0);
398 mtu3_setbits(mbase, U3D_QIECR0, QMU_TX_DONE_INT(epnum));
399 } else {
400 mtu3_writel(mbase, MU3D_EP_RXCR0(epnum), 0);
401 mtu3_writel(mbase, MU3D_EP_RXCR1(epnum), 0);
402 mtu3_writel(mbase, MU3D_EP_RXCR2(epnum), 0);
403 mtu3_setbits(mbase, U3D_QIECR0, QMU_RX_DONE_INT(epnum));
404 }
405
406 ep_fifo_free(mep);
407
408 dev_dbg(mtu->dev, "%s: %s\n", __func__, mep->name);
409}
410
411
412
413
414
415
416
417
418
419
420
421
422
423static void get_ep_fifo_config(struct mtu3 *mtu)
424{
425 struct mtu3_fifo_info *tx_fifo;
426 struct mtu3_fifo_info *rx_fifo;
427 u32 fifosize;
428
429 if (mtu->is_u3_ip) {
430 fifosize = mtu3_readl(mtu->mac_base, U3D_CAP_EPNTXFFSZ);
431 tx_fifo = &mtu->tx_fifo;
432 tx_fifo->base = 0;
433 tx_fifo->limit = fifosize / MTU3_EP_FIFO_UNIT;
434 bitmap_zero(tx_fifo->bitmap, MTU3_FIFO_BIT_SIZE);
435
436 fifosize = mtu3_readl(mtu->mac_base, U3D_CAP_EPNRXFFSZ);
437 rx_fifo = &mtu->rx_fifo;
438 rx_fifo->base = 0;
439 rx_fifo->limit = fifosize / MTU3_EP_FIFO_UNIT;
440 bitmap_zero(rx_fifo->bitmap, MTU3_FIFO_BIT_SIZE);
441 mtu->slot = MTU3_U3_IP_SLOT_DEFAULT;
442 } else {
443 fifosize = mtu3_readl(mtu->mac_base, U3D_CAP_EPNTXFFSZ);
444 tx_fifo = &mtu->tx_fifo;
445 tx_fifo->base = MTU3_U2_IP_EP0_FIFO_SIZE;
446 tx_fifo->limit = (fifosize / MTU3_EP_FIFO_UNIT) >> 1;
447 bitmap_zero(tx_fifo->bitmap, MTU3_FIFO_BIT_SIZE);
448
449 rx_fifo = &mtu->rx_fifo;
450 rx_fifo->base =
451 tx_fifo->base + tx_fifo->limit * MTU3_EP_FIFO_UNIT;
452 rx_fifo->limit = tx_fifo->limit;
453 bitmap_zero(rx_fifo->bitmap, MTU3_FIFO_BIT_SIZE);
454 mtu->slot = MTU3_U2_IP_SLOT_DEFAULT;
455 }
456
457 dev_dbg(mtu->dev, "%s, TX: base-%d, limit-%d; RX: base-%d, limit-%d\n",
458 __func__, tx_fifo->base, tx_fifo->limit,
459 rx_fifo->base, rx_fifo->limit);
460}
461
462void mtu3_ep0_setup(struct mtu3 *mtu)
463{
464 u32 maxpacket = mtu->g.ep0->maxpacket;
465 u32 csr;
466
467 dev_dbg(mtu->dev, "%s maxpacket: %d\n", __func__, maxpacket);
468
469 csr = mtu3_readl(mtu->mac_base, U3D_EP0CSR);
470 csr &= ~EP0_MAXPKTSZ_MSK;
471 csr |= EP0_MAXPKTSZ(maxpacket);
472 csr &= EP0_W1C_BITS;
473 mtu3_writel(mtu->mac_base, U3D_EP0CSR, csr);
474
475
476 mtu3_writel(mtu->mac_base, U3D_EPIESR, EP0ISR);
477}
478
479static int mtu3_mem_alloc(struct mtu3 *mtu)
480{
481 void __iomem *mbase = mtu->mac_base;
482 struct mtu3_ep *ep_array;
483 int in_ep_num, out_ep_num;
484 u32 cap_epinfo;
485 int ret;
486 int i;
487
488 cap_epinfo = mtu3_readl(mbase, U3D_CAP_EPINFO);
489 in_ep_num = CAP_TX_EP_NUM(cap_epinfo);
490 out_ep_num = CAP_RX_EP_NUM(cap_epinfo);
491
492 dev_info(mtu->dev, "fifosz/epnum: Tx=%#x/%d, Rx=%#x/%d\n",
493 mtu3_readl(mbase, U3D_CAP_EPNTXFFSZ), in_ep_num,
494 mtu3_readl(mbase, U3D_CAP_EPNRXFFSZ), out_ep_num);
495
496
497 mtu->num_eps = min(in_ep_num, out_ep_num) + 1;
498 ep_array = kcalloc(mtu->num_eps * 2, sizeof(*ep_array), GFP_KERNEL);
499 if (ep_array == NULL)
500 return -ENOMEM;
501
502 mtu->ep_array = ep_array;
503 mtu->in_eps = ep_array;
504 mtu->out_eps = &ep_array[mtu->num_eps];
505
506 mtu->ep0 = mtu->in_eps;
507 mtu->ep0->mtu = mtu;
508 mtu->ep0->epnum = 0;
509
510 for (i = 1; i < mtu->num_eps; i++) {
511 struct mtu3_ep *mep = mtu->in_eps + i;
512
513 mep->fifo = &mtu->tx_fifo;
514 mep = mtu->out_eps + i;
515 mep->fifo = &mtu->rx_fifo;
516 }
517
518 get_ep_fifo_config(mtu);
519
520 ret = mtu3_qmu_init(mtu);
521 if (ret)
522 kfree(mtu->ep_array);
523
524 return ret;
525}
526
527static void mtu3_mem_free(struct mtu3 *mtu)
528{
529 mtu3_qmu_exit(mtu);
530 kfree(mtu->ep_array);
531}
532
533static void mtu3_set_speed(struct mtu3 *mtu)
534{
535 void __iomem *mbase = mtu->mac_base;
536
537 if (!mtu->is_u3_ip && (mtu->max_speed > USB_SPEED_HIGH))
538 mtu->max_speed = USB_SPEED_HIGH;
539
540 if (mtu->max_speed == USB_SPEED_FULL) {
541
542 mtu3_clrbits(mbase, U3D_USB3_CONFIG, USB3_EN);
543
544 mtu3_clrbits(mbase, U3D_POWER_MANAGEMENT, HS_ENABLE);
545 } else if (mtu->max_speed == USB_SPEED_HIGH) {
546 mtu3_clrbits(mbase, U3D_USB3_CONFIG, USB3_EN);
547
548 mtu3_setbits(mbase, U3D_POWER_MANAGEMENT, HS_ENABLE);
549 }
550
551 dev_info(mtu->dev, "max_speed: %s\n",
552 usb_speed_string(mtu->max_speed));
553}
554
555static void mtu3_regs_init(struct mtu3 *mtu)
556{
557
558 void __iomem *mbase = mtu->mac_base;
559
560
561 mtu3_intr_disable(mtu);
562 mtu3_intr_status_clear(mtu);
563
564 if (mtu->is_u3_ip) {
565
566 mtu3_clrbits(mbase, U3D_LINK_POWER_CONTROL,
567 SW_U1_ACCEPT_ENABLE | SW_U2_ACCEPT_ENABLE |
568 SW_U1_REQUEST_ENABLE | SW_U2_REQUEST_ENABLE);
569
570 mtu3_clrbits(mbase, U3D_LTSSM_CTRL, SOFT_U3_EXIT_EN);
571
572 mtu3_setbits(mbase, U3D_USB2_TEST_MODE, U2U3_AUTO_SWITCH);
573 }
574
575 mtu3_set_speed(mtu);
576
577
578 mtu3_clrbits(mbase, U3D_LINK_RESET_INFO, WTCHRP_MSK);
579
580 mtu3_writel(mbase, U3D_DEVICE_CONF, 0);
581
582 mtu3_setbits(mbase, U3D_QCR0, QMU_CS16B_EN);
583
584 mtu3_clrbits(mbase, U3D_MISC_CTRL, VBUS_FRC_EN | VBUS_ON);
585}
586
587static irqreturn_t mtu3_link_isr(struct mtu3 *mtu)
588{
589 void __iomem *mbase = mtu->mac_base;
590 enum usb_device_speed udev_speed;
591 u32 maxpkt = 64;
592 u32 link;
593 u32 speed;
594
595 link = mtu3_readl(mbase, U3D_DEV_LINK_INTR);
596 link &= mtu3_readl(mbase, U3D_DEV_LINK_INTR_ENABLE);
597 mtu3_writel(mbase, U3D_DEV_LINK_INTR, link);
598 dev_dbg(mtu->dev, "=== LINK[%x] ===\n", link);
599
600 if (!(link & SSUSB_DEV_SPEED_CHG_INTR))
601 return IRQ_NONE;
602
603 speed = SSUSB_DEV_SPEED(mtu3_readl(mbase, U3D_DEVICE_CONF));
604
605 switch (speed) {
606 case MTU3_SPEED_FULL:
607 udev_speed = USB_SPEED_FULL;
608
609 mtu3_writel(mbase, U3D_USB20_LPM_PARAMETER, LPM_BESLDCK(0xf)
610 | LPM_BESLCK(4) | LPM_BESLCK_U3(0xa));
611 mtu3_setbits(mbase, U3D_POWER_MANAGEMENT,
612 LPM_BESL_STALL | LPM_BESLD_STALL);
613 break;
614 case MTU3_SPEED_HIGH:
615 udev_speed = USB_SPEED_HIGH;
616
617 mtu3_writel(mbase, U3D_USB20_LPM_PARAMETER, LPM_BESLDCK(0xf)
618 | LPM_BESLCK(4) | LPM_BESLCK_U3(0xa));
619 mtu3_setbits(mbase, U3D_POWER_MANAGEMENT,
620 LPM_BESL_STALL | LPM_BESLD_STALL);
621 break;
622 case MTU3_SPEED_SUPER:
623 udev_speed = USB_SPEED_SUPER;
624 maxpkt = 512;
625 break;
626 default:
627 udev_speed = USB_SPEED_UNKNOWN;
628 break;
629 }
630 dev_dbg(mtu->dev, "%s: %s\n", __func__, usb_speed_string(udev_speed));
631
632 mtu->g.speed = udev_speed;
633 mtu->g.ep0->maxpacket = maxpkt;
634 mtu->ep0_state = MU3D_EP0_STATE_SETUP;
635
636 if (udev_speed == USB_SPEED_UNKNOWN)
637 mtu3_gadget_disconnect(mtu);
638 else
639 mtu3_ep0_setup(mtu);
640
641 return IRQ_HANDLED;
642}
643
644static irqreturn_t mtu3_u3_ltssm_isr(struct mtu3 *mtu)
645{
646 void __iomem *mbase = mtu->mac_base;
647 u32 ltssm;
648
649 ltssm = mtu3_readl(mbase, U3D_LTSSM_INTR);
650 ltssm &= mtu3_readl(mbase, U3D_LTSSM_INTR_ENABLE);
651 mtu3_writel(mbase, U3D_LTSSM_INTR, ltssm);
652 dev_dbg(mtu->dev, "=== LTSSM[%x] ===\n", ltssm);
653
654 if (ltssm & (HOT_RST_INTR | WARM_RST_INTR))
655 mtu3_gadget_reset(mtu);
656
657 if (ltssm & VBUS_FALL_INTR)
658 mtu3_ss_func_set(mtu, false);
659
660 if (ltssm & VBUS_RISE_INTR)
661 mtu3_ss_func_set(mtu, true);
662
663 if (ltssm & EXIT_U3_INTR)
664 mtu3_gadget_resume(mtu);
665
666 if (ltssm & ENTER_U3_INTR)
667 mtu3_gadget_suspend(mtu);
668
669 return IRQ_HANDLED;
670}
671
672static irqreturn_t mtu3_u2_common_isr(struct mtu3 *mtu)
673{
674 void __iomem *mbase = mtu->mac_base;
675 u32 u2comm;
676
677 u2comm = mtu3_readl(mbase, U3D_COMMON_USB_INTR);
678 u2comm &= mtu3_readl(mbase, U3D_COMMON_USB_INTR_ENABLE);
679 mtu3_writel(mbase, U3D_COMMON_USB_INTR, u2comm);
680 dev_dbg(mtu->dev, "=== U2COMM[%x] ===\n", u2comm);
681
682 if (u2comm & SUSPEND_INTR)
683 mtu3_gadget_suspend(mtu);
684
685 if (u2comm & RESUME_INTR)
686 mtu3_gadget_resume(mtu);
687
688 if (u2comm & RESET_INTR)
689 mtu3_gadget_reset(mtu);
690
691 return IRQ_HANDLED;
692}
693
694static irqreturn_t mtu3_irq(int irq, void *data)
695{
696 struct mtu3 *mtu = (struct mtu3 *)data;
697 unsigned long flags;
698 u32 level1;
699
700 spin_lock_irqsave(&mtu->lock, flags);
701
702
703 level1 = mtu3_readl(mtu->mac_base, U3D_LV1ISR);
704 level1 &= mtu3_readl(mtu->mac_base, U3D_LV1IER);
705
706 if (level1 & EP_CTRL_INTR)
707 mtu3_link_isr(mtu);
708
709 if (level1 & MAC2_INTR)
710 mtu3_u2_common_isr(mtu);
711
712 if (level1 & MAC3_INTR)
713 mtu3_u3_ltssm_isr(mtu);
714
715 if (level1 & BMU_INTR)
716 mtu3_ep0_isr(mtu);
717
718 if (level1 & QMU_INTR)
719 mtu3_qmu_isr(mtu);
720
721 spin_unlock_irqrestore(&mtu->lock, flags);
722
723 return IRQ_HANDLED;
724}
725
726static int mtu3_hw_init(struct mtu3 *mtu)
727{
728 u32 cap_dev;
729 int ret;
730
731 mtu->hw_version = mtu3_readl(mtu->ippc_base, U3D_SSUSB_HW_ID);
732
733 cap_dev = mtu3_readl(mtu->ippc_base, U3D_SSUSB_IP_DEV_CAP);
734 mtu->is_u3_ip = !!SSUSB_IP_DEV_U3_PORT_NUM(cap_dev);
735
736 dev_info(mtu->dev, "IP version 0x%x(%s IP)\n", mtu->hw_version,
737 mtu->is_u3_ip ? "U3" : "U2");
738
739 mtu3_device_reset(mtu);
740
741 ret = mtu3_device_enable(mtu);
742 if (ret) {
743 dev_err(mtu->dev, "device enable failed %d\n", ret);
744 return ret;
745 }
746
747 ret = mtu3_mem_alloc(mtu);
748 if (ret)
749 return -ENOMEM;
750
751 mtu3_regs_init(mtu);
752
753 return 0;
754}
755
756static void mtu3_hw_exit(struct mtu3 *mtu)
757{
758 mtu3_device_disable(mtu);
759 mtu3_mem_free(mtu);
760}
761
762
763
764int ssusb_gadget_init(struct ssusb_mtk *ssusb)
765{
766 struct device *dev = ssusb->dev;
767 struct platform_device *pdev = to_platform_device(dev);
768 struct mtu3 *mtu = NULL;
769 struct resource *res;
770 int ret = -ENOMEM;
771
772 mtu = devm_kzalloc(dev, sizeof(struct mtu3), GFP_KERNEL);
773 if (mtu == NULL)
774 return -ENOMEM;
775
776 mtu->irq = platform_get_irq(pdev, 0);
777 if (mtu->irq <= 0) {
778 dev_err(dev, "fail to get irq number\n");
779 return -ENODEV;
780 }
781 dev_info(dev, "irq %d\n", mtu->irq);
782
783 res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "mac");
784 mtu->mac_base = devm_ioremap_resource(dev, res);
785 if (IS_ERR(mtu->mac_base)) {
786 dev_err(dev, "error mapping memory for dev mac\n");
787 return PTR_ERR(mtu->mac_base);
788 }
789
790 spin_lock_init(&mtu->lock);
791 mtu->dev = dev;
792 mtu->ippc_base = ssusb->ippc_base;
793 ssusb->mac_base = mtu->mac_base;
794 ssusb->u3d = mtu;
795 mtu->ssusb = ssusb;
796 mtu->max_speed = usb_get_maximum_speed(dev);
797
798
799 switch (mtu->max_speed) {
800 case USB_SPEED_FULL:
801 case USB_SPEED_HIGH:
802 case USB_SPEED_SUPER:
803 break;
804 default:
805 dev_err(dev, "invalid max_speed: %s\n",
806 usb_speed_string(mtu->max_speed));
807
808 case USB_SPEED_UNKNOWN:
809
810 mtu->max_speed = USB_SPEED_SUPER;
811 break;
812 }
813
814 dev_dbg(dev, "mac_base=0x%p, ippc_base=0x%p\n",
815 mtu->mac_base, mtu->ippc_base);
816
817 ret = mtu3_hw_init(mtu);
818 if (ret) {
819 dev_err(dev, "mtu3 hw init failed:%d\n", ret);
820 return ret;
821 }
822
823 ret = devm_request_irq(dev, mtu->irq, mtu3_irq, 0, dev_name(dev), mtu);
824 if (ret) {
825 dev_err(dev, "request irq %d failed!\n", mtu->irq);
826 goto irq_err;
827 }
828
829 device_init_wakeup(dev, true);
830
831 ret = mtu3_gadget_setup(mtu);
832 if (ret) {
833 dev_err(dev, "mtu3 gadget init failed:%d\n", ret);
834 goto gadget_err;
835 }
836
837
838 if (mtu->ssusb->dr_mode == USB_DR_MODE_OTG)
839 mtu3_stop(mtu);
840
841 dev_dbg(dev, " %s() done...\n", __func__);
842
843 return 0;
844
845gadget_err:
846 device_init_wakeup(dev, false);
847
848irq_err:
849 mtu3_hw_exit(mtu);
850 ssusb->u3d = NULL;
851 dev_err(dev, " %s() fail...\n", __func__);
852
853 return ret;
854}
855
856void ssusb_gadget_exit(struct ssusb_mtk *ssusb)
857{
858 struct mtu3 *mtu = ssusb->u3d;
859
860 mtu3_gadget_cleanup(mtu);
861 device_init_wakeup(ssusb->dev, false);
862 mtu3_hw_exit(mtu);
863}
864
