linux/drivers/gpu/drm/exynos/exynos_drm_fimd.c
<<
>>
Prefs
   1/* exynos_drm_fimd.c
   2 *
   3 * Copyright (C) 2011 Samsung Electronics Co.Ltd
   4 * Authors:
   5 *      Joonyoung Shim <jy0922.shim@samsung.com>
   6 *      Inki Dae <inki.dae@samsung.com>
   7 *
   8 * This program is free software; you can redistribute  it and/or modify it
   9 * under  the terms of  the GNU General  Public License as published by the
  10 * Free Software Foundation;  either version 2 of the  License, or (at your
  11 * option) any later version.
  12 *
  13 */
  14#include <drm/drmP.h>
  15
  16#include <linux/kernel.h>
  17#include <linux/platform_device.h>
  18#include <linux/clk.h>
  19#include <linux/of.h>
  20#include <linux/of_device.h>
  21#include <linux/pm_runtime.h>
  22#include <linux/component.h>
  23#include <linux/mfd/syscon.h>
  24#include <linux/regmap.h>
  25
  26#include <video/of_display_timing.h>
  27#include <video/of_videomode.h>
  28#include <video/samsung_fimd.h>
  29#include <drm/exynos_drm.h>
  30
  31#include "exynos_drm_drv.h"
  32#include "exynos_drm_fb.h"
  33#include "exynos_drm_crtc.h"
  34#include "exynos_drm_plane.h"
  35#include "exynos_drm_iommu.h"
  36
  37/*
  38 * FIMD stands for Fully Interactive Mobile Display and
  39 * as a display controller, it transfers contents drawn on memory
  40 * to a LCD Panel through Display Interfaces such as RGB or
  41 * CPU Interface.
  42 */
  43
  44#define MIN_FB_WIDTH_FOR_16WORD_BURST 128
  45
  46/* position control register for hardware window 0, 2 ~ 4.*/
  47#define VIDOSD_A(win)           (VIDOSD_BASE + 0x00 + (win) * 16)
  48#define VIDOSD_B(win)           (VIDOSD_BASE + 0x04 + (win) * 16)
  49/*
  50 * size control register for hardware windows 0 and alpha control register
  51 * for hardware windows 1 ~ 4
  52 */
  53#define VIDOSD_C(win)           (VIDOSD_BASE + 0x08 + (win) * 16)
  54/* size control register for hardware windows 1 ~ 2. */
  55#define VIDOSD_D(win)           (VIDOSD_BASE + 0x0C + (win) * 16)
  56
  57#define VIDWnALPHA0(win)        (VIDW_ALPHA + 0x00 + (win) * 8)
  58#define VIDWnALPHA1(win)        (VIDW_ALPHA + 0x04 + (win) * 8)
  59
  60#define VIDWx_BUF_START(win, buf)       (VIDW_BUF_START(buf) + (win) * 8)
  61#define VIDWx_BUF_START_S(win, buf)     (VIDW_BUF_START_S(buf) + (win) * 8)
  62#define VIDWx_BUF_END(win, buf)         (VIDW_BUF_END(buf) + (win) * 8)
  63#define VIDWx_BUF_SIZE(win, buf)        (VIDW_BUF_SIZE(buf) + (win) * 4)
  64
  65/* color key control register for hardware window 1 ~ 4. */
  66#define WKEYCON0_BASE(x)                ((WKEYCON0 + 0x140) + ((x - 1) * 8))
  67/* color key value register for hardware window 1 ~ 4. */
  68#define WKEYCON1_BASE(x)                ((WKEYCON1 + 0x140) + ((x - 1) * 8))
  69
  70/* I80 trigger control register */
  71#define TRIGCON                         0x1A4
  72#define TRGMODE_ENABLE                  (1 << 0)
  73#define SWTRGCMD_ENABLE                 (1 << 1)
  74/* Exynos3250, 3472, 5260 5410, 5420 and 5422 only supported. */
  75#define HWTRGEN_ENABLE                  (1 << 3)
  76#define HWTRGMASK_ENABLE                (1 << 4)
  77/* Exynos3250, 3472, 5260, 5420 and 5422 only supported. */
  78#define HWTRIGEN_PER_ENABLE             (1 << 31)
  79
  80/* display mode change control register except exynos4 */
  81#define VIDOUT_CON                      0x000
  82#define VIDOUT_CON_F_I80_LDI0           (0x2 << 8)
  83
  84/* I80 interface control for main LDI register */
  85#define I80IFCONFAx(x)                  (0x1B0 + (x) * 4)
  86#define I80IFCONFBx(x)                  (0x1B8 + (x) * 4)
  87#define LCD_CS_SETUP(x)                 ((x) << 16)
  88#define LCD_WR_SETUP(x)                 ((x) << 12)
  89#define LCD_WR_ACTIVE(x)                ((x) << 8)
  90#define LCD_WR_HOLD(x)                  ((x) << 4)
  91#define I80IFEN_ENABLE                  (1 << 0)
  92
  93/* FIMD has totally five hardware windows. */
  94#define WINDOWS_NR      5
  95
  96/* HW trigger flag on i80 panel. */
  97#define I80_HW_TRG     (1 << 1)
  98
  99struct fimd_driver_data {
 100        unsigned int timing_base;
 101        unsigned int lcdblk_offset;
 102        unsigned int lcdblk_vt_shift;
 103        unsigned int lcdblk_bypass_shift;
 104        unsigned int lcdblk_mic_bypass_shift;
 105        unsigned int trg_type;
 106
 107        unsigned int has_shadowcon:1;
 108        unsigned int has_clksel:1;
 109        unsigned int has_limited_fmt:1;
 110        unsigned int has_vidoutcon:1;
 111        unsigned int has_vtsel:1;
 112        unsigned int has_mic_bypass:1;
 113        unsigned int has_dp_clk:1;
 114        unsigned int has_hw_trigger:1;
 115        unsigned int has_trigger_per_te:1;
 116};
 117
 118static struct fimd_driver_data s3c64xx_fimd_driver_data = {
 119        .timing_base = 0x0,
 120        .has_clksel = 1,
 121        .has_limited_fmt = 1,
 122};
 123
 124static struct fimd_driver_data exynos3_fimd_driver_data = {
 125        .timing_base = 0x20000,
 126        .lcdblk_offset = 0x210,
 127        .lcdblk_bypass_shift = 1,
 128        .has_shadowcon = 1,
 129        .has_vidoutcon = 1,
 130};
 131
 132static struct fimd_driver_data exynos4_fimd_driver_data = {
 133        .timing_base = 0x0,
 134        .lcdblk_offset = 0x210,
 135        .lcdblk_vt_shift = 10,
 136        .lcdblk_bypass_shift = 1,
 137        .has_shadowcon = 1,
 138        .has_vtsel = 1,
 139};
 140
 141static struct fimd_driver_data exynos5_fimd_driver_data = {
 142        .timing_base = 0x20000,
 143        .lcdblk_offset = 0x214,
 144        .lcdblk_vt_shift = 24,
 145        .lcdblk_bypass_shift = 15,
 146        .has_shadowcon = 1,
 147        .has_vidoutcon = 1,
 148        .has_vtsel = 1,
 149        .has_dp_clk = 1,
 150};
 151
 152static struct fimd_driver_data exynos5420_fimd_driver_data = {
 153        .timing_base = 0x20000,
 154        .lcdblk_offset = 0x214,
 155        .lcdblk_vt_shift = 24,
 156        .lcdblk_bypass_shift = 15,
 157        .lcdblk_mic_bypass_shift = 11,
 158        .has_shadowcon = 1,
 159        .has_vidoutcon = 1,
 160        .has_vtsel = 1,
 161        .has_mic_bypass = 1,
 162        .has_dp_clk = 1,
 163};
 164
 165struct fimd_context {
 166        struct device                   *dev;
 167        struct drm_device               *drm_dev;
 168        struct exynos_drm_crtc          *crtc;
 169        struct exynos_drm_plane         planes[WINDOWS_NR];
 170        struct exynos_drm_plane_config  configs[WINDOWS_NR];
 171        struct clk                      *bus_clk;
 172        struct clk                      *lcd_clk;
 173        void __iomem                    *regs;
 174        struct regmap                   *sysreg;
 175        unsigned long                   irq_flags;
 176        u32                             vidcon0;
 177        u32                             vidcon1;
 178        u32                             vidout_con;
 179        u32                             i80ifcon;
 180        bool                            i80_if;
 181        bool                            suspended;
 182        wait_queue_head_t               wait_vsync_queue;
 183        atomic_t                        wait_vsync_event;
 184        atomic_t                        win_updated;
 185        atomic_t                        triggering;
 186        u32                             clkdiv;
 187
 188        const struct fimd_driver_data *driver_data;
 189        struct drm_encoder *encoder;
 190        struct exynos_drm_clk           dp_clk;
 191};
 192
 193static const struct of_device_id fimd_driver_dt_match[] = {
 194        { .compatible = "samsung,s3c6400-fimd",
 195          .data = &s3c64xx_fimd_driver_data },
 196        { .compatible = "samsung,exynos3250-fimd",
 197          .data = &exynos3_fimd_driver_data },
 198        { .compatible = "samsung,exynos4210-fimd",
 199          .data = &exynos4_fimd_driver_data },
 200        { .compatible = "samsung,exynos5250-fimd",
 201          .data = &exynos5_fimd_driver_data },
 202        { .compatible = "samsung,exynos5420-fimd",
 203          .data = &exynos5420_fimd_driver_data },
 204        {},
 205};
 206MODULE_DEVICE_TABLE(of, fimd_driver_dt_match);
 207
 208static const enum drm_plane_type fimd_win_types[WINDOWS_NR] = {
 209        DRM_PLANE_TYPE_PRIMARY,
 210        DRM_PLANE_TYPE_OVERLAY,
 211        DRM_PLANE_TYPE_OVERLAY,
 212        DRM_PLANE_TYPE_OVERLAY,
 213        DRM_PLANE_TYPE_CURSOR,
 214};
 215
 216static const uint32_t fimd_formats[] = {
 217        DRM_FORMAT_C8,
 218        DRM_FORMAT_XRGB1555,
 219        DRM_FORMAT_RGB565,
 220        DRM_FORMAT_XRGB8888,
 221        DRM_FORMAT_ARGB8888,
 222};
 223
 224static int fimd_enable_vblank(struct exynos_drm_crtc *crtc)
 225{
 226        struct fimd_context *ctx = crtc->ctx;
 227        u32 val;
 228
 229        if (ctx->suspended)
 230                return -EPERM;
 231
 232        if (!test_and_set_bit(0, &ctx->irq_flags)) {
 233                val = readl(ctx->regs + VIDINTCON0);
 234
 235                val |= VIDINTCON0_INT_ENABLE;
 236
 237                if (ctx->i80_if) {
 238                        val |= VIDINTCON0_INT_I80IFDONE;
 239                        val |= VIDINTCON0_INT_SYSMAINCON;
 240                        val &= ~VIDINTCON0_INT_SYSSUBCON;
 241                } else {
 242                        val |= VIDINTCON0_INT_FRAME;
 243
 244                        val &= ~VIDINTCON0_FRAMESEL0_MASK;
 245                        val |= VIDINTCON0_FRAMESEL0_FRONTPORCH;
 246                        val &= ~VIDINTCON0_FRAMESEL1_MASK;
 247                        val |= VIDINTCON0_FRAMESEL1_NONE;
 248                }
 249
 250                writel(val, ctx->regs + VIDINTCON0);
 251        }
 252
 253        return 0;
 254}
 255
 256static void fimd_disable_vblank(struct exynos_drm_crtc *crtc)
 257{
 258        struct fimd_context *ctx = crtc->ctx;
 259        u32 val;
 260
 261        if (ctx->suspended)
 262                return;
 263
 264        if (test_and_clear_bit(0, &ctx->irq_flags)) {
 265                val = readl(ctx->regs + VIDINTCON0);
 266
 267                val &= ~VIDINTCON0_INT_ENABLE;
 268
 269                if (ctx->i80_if) {
 270                        val &= ~VIDINTCON0_INT_I80IFDONE;
 271                        val &= ~VIDINTCON0_INT_SYSMAINCON;
 272                        val &= ~VIDINTCON0_INT_SYSSUBCON;
 273                } else
 274                        val &= ~VIDINTCON0_INT_FRAME;
 275
 276                writel(val, ctx->regs + VIDINTCON0);
 277        }
 278}
 279
 280static void fimd_wait_for_vblank(struct exynos_drm_crtc *crtc)
 281{
 282        struct fimd_context *ctx = crtc->ctx;
 283
 284        if (ctx->suspended)
 285                return;
 286
 287        atomic_set(&ctx->wait_vsync_event, 1);
 288
 289        /*
 290         * wait for FIMD to signal VSYNC interrupt or return after
 291         * timeout which is set to 50ms (refresh rate of 20).
 292         */
 293        if (!wait_event_timeout(ctx->wait_vsync_queue,
 294                                !atomic_read(&ctx->wait_vsync_event),
 295                                HZ/20))
 296                DRM_DEBUG_KMS("vblank wait timed out.\n");
 297}
 298
 299static void fimd_enable_video_output(struct fimd_context *ctx, unsigned int win,
 300                                        bool enable)
 301{
 302        u32 val = readl(ctx->regs + WINCON(win));
 303
 304        if (enable)
 305                val |= WINCONx_ENWIN;
 306        else
 307                val &= ~WINCONx_ENWIN;
 308
 309        writel(val, ctx->regs + WINCON(win));
 310}
 311
 312static void fimd_enable_shadow_channel_path(struct fimd_context *ctx,
 313                                                unsigned int win,
 314                                                bool enable)
 315{
 316        u32 val = readl(ctx->regs + SHADOWCON);
 317
 318        if (enable)
 319                val |= SHADOWCON_CHx_ENABLE(win);
 320        else
 321                val &= ~SHADOWCON_CHx_ENABLE(win);
 322
 323        writel(val, ctx->regs + SHADOWCON);
 324}
 325
 326static void fimd_clear_channels(struct exynos_drm_crtc *crtc)
 327{
 328        struct fimd_context *ctx = crtc->ctx;
 329        unsigned int win, ch_enabled = 0;
 330
 331        DRM_DEBUG_KMS("%s\n", __FILE__);
 332
 333        /* Hardware is in unknown state, so ensure it gets enabled properly */
 334        pm_runtime_get_sync(ctx->dev);
 335
 336        clk_prepare_enable(ctx->bus_clk);
 337        clk_prepare_enable(ctx->lcd_clk);
 338
 339        /* Check if any channel is enabled. */
 340        for (win = 0; win < WINDOWS_NR; win++) {
 341                u32 val = readl(ctx->regs + WINCON(win));
 342
 343                if (val & WINCONx_ENWIN) {
 344                        fimd_enable_video_output(ctx, win, false);
 345
 346                        if (ctx->driver_data->has_shadowcon)
 347                                fimd_enable_shadow_channel_path(ctx, win,
 348                                                                false);
 349
 350                        ch_enabled = 1;
 351                }
 352        }
 353
 354        /* Wait for vsync, as disable channel takes effect at next vsync */
 355        if (ch_enabled) {
 356                ctx->suspended = false;
 357
 358                fimd_enable_vblank(ctx->crtc);
 359                fimd_wait_for_vblank(ctx->crtc);
 360                fimd_disable_vblank(ctx->crtc);
 361
 362                ctx->suspended = true;
 363        }
 364
 365        clk_disable_unprepare(ctx->lcd_clk);
 366        clk_disable_unprepare(ctx->bus_clk);
 367
 368        pm_runtime_put(ctx->dev);
 369}
 370
 371
 372static int fimd_atomic_check(struct exynos_drm_crtc *crtc,
 373                struct drm_crtc_state *state)
 374{
 375        struct drm_display_mode *mode = &state->adjusted_mode;
 376        struct fimd_context *ctx = crtc->ctx;
 377        unsigned long ideal_clk, lcd_rate;
 378        u32 clkdiv;
 379
 380        if (mode->clock == 0) {
 381                DRM_INFO("Mode has zero clock value.\n");
 382                return -EINVAL;
 383        }
 384
 385        ideal_clk = mode->clock * 1000;
 386
 387        if (ctx->i80_if) {
 388                /*
 389                 * The frame done interrupt should be occurred prior to the
 390                 * next TE signal.
 391                 */
 392                ideal_clk *= 2;
 393        }
 394
 395        lcd_rate = clk_get_rate(ctx->lcd_clk);
 396        if (2 * lcd_rate < ideal_clk) {
 397                DRM_INFO("sclk_fimd clock too low(%lu) for requested pixel clock(%lu)\n",
 398                         lcd_rate, ideal_clk);
 399                return -EINVAL;
 400        }
 401
 402        /* Find the clock divider value that gets us closest to ideal_clk */
 403        clkdiv = DIV_ROUND_CLOSEST(lcd_rate, ideal_clk);
 404        if (clkdiv >= 0x200) {
 405                DRM_INFO("requested pixel clock(%lu) too low\n", ideal_clk);
 406                return -EINVAL;
 407        }
 408
 409        ctx->clkdiv = (clkdiv < 0x100) ? clkdiv : 0xff;
 410
 411        return 0;
 412}
 413
 414static void fimd_setup_trigger(struct fimd_context *ctx)
 415{
 416        void __iomem *timing_base = ctx->regs + ctx->driver_data->timing_base;
 417        u32 trg_type = ctx->driver_data->trg_type;
 418        u32 val = readl(timing_base + TRIGCON);
 419
 420        val &= ~(TRGMODE_ENABLE);
 421
 422        if (trg_type == I80_HW_TRG) {
 423                if (ctx->driver_data->has_hw_trigger)
 424                        val |= HWTRGEN_ENABLE | HWTRGMASK_ENABLE;
 425                if (ctx->driver_data->has_trigger_per_te)
 426                        val |= HWTRIGEN_PER_ENABLE;
 427        } else {
 428                val |= TRGMODE_ENABLE;
 429        }
 430
 431        writel(val, timing_base + TRIGCON);
 432}
 433
 434static void fimd_commit(struct exynos_drm_crtc *crtc)
 435{
 436        struct fimd_context *ctx = crtc->ctx;
 437        struct drm_display_mode *mode = &crtc->base.state->adjusted_mode;
 438        const struct fimd_driver_data *driver_data = ctx->driver_data;
 439        void *timing_base = ctx->regs + driver_data->timing_base;
 440        u32 val;
 441
 442        if (ctx->suspended)
 443                return;
 444
 445        /* nothing to do if we haven't set the mode yet */
 446        if (mode->htotal == 0 || mode->vtotal == 0)
 447                return;
 448
 449        if (ctx->i80_if) {
 450                val = ctx->i80ifcon | I80IFEN_ENABLE;
 451                writel(val, timing_base + I80IFCONFAx(0));
 452
 453                /* disable auto frame rate */
 454                writel(0, timing_base + I80IFCONFBx(0));
 455
 456                /* set video type selection to I80 interface */
 457                if (driver_data->has_vtsel && ctx->sysreg &&
 458                                regmap_update_bits(ctx->sysreg,
 459                                        driver_data->lcdblk_offset,
 460                                        0x3 << driver_data->lcdblk_vt_shift,
 461                                        0x1 << driver_data->lcdblk_vt_shift)) {
 462                        DRM_ERROR("Failed to update sysreg for I80 i/f.\n");
 463                        return;
 464                }
 465        } else {
 466                int vsync_len, vbpd, vfpd, hsync_len, hbpd, hfpd;
 467                u32 vidcon1;
 468
 469                /* setup polarity values */
 470                vidcon1 = ctx->vidcon1;
 471                if (mode->flags & DRM_MODE_FLAG_NVSYNC)
 472                        vidcon1 |= VIDCON1_INV_VSYNC;
 473                if (mode->flags & DRM_MODE_FLAG_NHSYNC)
 474                        vidcon1 |= VIDCON1_INV_HSYNC;
 475                writel(vidcon1, ctx->regs + driver_data->timing_base + VIDCON1);
 476
 477                /* setup vertical timing values. */
 478                vsync_len = mode->crtc_vsync_end - mode->crtc_vsync_start;
 479                vbpd = mode->crtc_vtotal - mode->crtc_vsync_end;
 480                vfpd = mode->crtc_vsync_start - mode->crtc_vdisplay;
 481
 482                val = VIDTCON0_VBPD(vbpd - 1) |
 483                        VIDTCON0_VFPD(vfpd - 1) |
 484                        VIDTCON0_VSPW(vsync_len - 1);
 485                writel(val, ctx->regs + driver_data->timing_base + VIDTCON0);
 486
 487                /* setup horizontal timing values.  */
 488                hsync_len = mode->crtc_hsync_end - mode->crtc_hsync_start;
 489                hbpd = mode->crtc_htotal - mode->crtc_hsync_end;
 490                hfpd = mode->crtc_hsync_start - mode->crtc_hdisplay;
 491
 492                val = VIDTCON1_HBPD(hbpd - 1) |
 493                        VIDTCON1_HFPD(hfpd - 1) |
 494                        VIDTCON1_HSPW(hsync_len - 1);
 495                writel(val, ctx->regs + driver_data->timing_base + VIDTCON1);
 496        }
 497
 498        if (driver_data->has_vidoutcon)
 499                writel(ctx->vidout_con, timing_base + VIDOUT_CON);
 500
 501        /* set bypass selection */
 502        if (ctx->sysreg && regmap_update_bits(ctx->sysreg,
 503                                driver_data->lcdblk_offset,
 504                                0x1 << driver_data->lcdblk_bypass_shift,
 505                                0x1 << driver_data->lcdblk_bypass_shift)) {
 506                DRM_ERROR("Failed to update sysreg for bypass setting.\n");
 507                return;
 508        }
 509
 510        /* TODO: When MIC is enabled for display path, the lcdblk_mic_bypass
 511         * bit should be cleared.
 512         */
 513        if (driver_data->has_mic_bypass && ctx->sysreg &&
 514            regmap_update_bits(ctx->sysreg,
 515                                driver_data->lcdblk_offset,
 516                                0x1 << driver_data->lcdblk_mic_bypass_shift,
 517                                0x1 << driver_data->lcdblk_mic_bypass_shift)) {
 518                DRM_ERROR("Failed to update sysreg for bypass mic.\n");
 519                return;
 520        }
 521
 522        /* setup horizontal and vertical display size. */
 523        val = VIDTCON2_LINEVAL(mode->vdisplay - 1) |
 524               VIDTCON2_HOZVAL(mode->hdisplay - 1) |
 525               VIDTCON2_LINEVAL_E(mode->vdisplay - 1) |
 526               VIDTCON2_HOZVAL_E(mode->hdisplay - 1);
 527        writel(val, ctx->regs + driver_data->timing_base + VIDTCON2);
 528
 529        fimd_setup_trigger(ctx);
 530
 531        /*
 532         * fields of register with prefix '_F' would be updated
 533         * at vsync(same as dma start)
 534         */
 535        val = ctx->vidcon0;
 536        val |= VIDCON0_ENVID | VIDCON0_ENVID_F;
 537
 538        if (ctx->driver_data->has_clksel)
 539                val |= VIDCON0_CLKSEL_LCD;
 540
 541        if (ctx->clkdiv > 1)
 542                val |= VIDCON0_CLKVAL_F(ctx->clkdiv - 1) | VIDCON0_CLKDIR;
 543
 544        writel(val, ctx->regs + VIDCON0);
 545}
 546
 547
 548static void fimd_win_set_pixfmt(struct fimd_context *ctx, unsigned int win,
 549                                uint32_t pixel_format, int width)
 550{
 551        unsigned long val;
 552
 553        val = WINCONx_ENWIN;
 554
 555        /*
 556         * In case of s3c64xx, window 0 doesn't support alpha channel.
 557         * So the request format is ARGB8888 then change it to XRGB8888.
 558         */
 559        if (ctx->driver_data->has_limited_fmt && !win) {
 560                if (pixel_format == DRM_FORMAT_ARGB8888)
 561                        pixel_format = DRM_FORMAT_XRGB8888;
 562        }
 563
 564        switch (pixel_format) {
 565        case DRM_FORMAT_C8:
 566                val |= WINCON0_BPPMODE_8BPP_PALETTE;
 567                val |= WINCONx_BURSTLEN_8WORD;
 568                val |= WINCONx_BYTSWP;
 569                break;
 570        case DRM_FORMAT_XRGB1555:
 571                val |= WINCON0_BPPMODE_16BPP_1555;
 572                val |= WINCONx_HAWSWP;
 573                val |= WINCONx_BURSTLEN_16WORD;
 574                break;
 575        case DRM_FORMAT_RGB565:
 576                val |= WINCON0_BPPMODE_16BPP_565;
 577                val |= WINCONx_HAWSWP;
 578                val |= WINCONx_BURSTLEN_16WORD;
 579                break;
 580        case DRM_FORMAT_XRGB8888:
 581                val |= WINCON0_BPPMODE_24BPP_888;
 582                val |= WINCONx_WSWP;
 583                val |= WINCONx_BURSTLEN_16WORD;
 584                break;
 585        case DRM_FORMAT_ARGB8888:
 586        default:
 587                val |= WINCON1_BPPMODE_25BPP_A1888
 588                        | WINCON1_BLD_PIX | WINCON1_ALPHA_SEL;
 589                val |= WINCONx_WSWP;
 590                val |= WINCONx_BURSTLEN_16WORD;
 591                break;
 592        }
 593
 594        /*
 595         * Setting dma-burst to 16Word causes permanent tearing for very small
 596         * buffers, e.g. cursor buffer. Burst Mode switching which based on
 597         * plane size is not recommended as plane size varies alot towards the
 598         * end of the screen and rapid movement causes unstable DMA, but it is
 599         * still better to change dma-burst than displaying garbage.
 600         */
 601
 602        if (width < MIN_FB_WIDTH_FOR_16WORD_BURST) {
 603                val &= ~WINCONx_BURSTLEN_MASK;
 604                val |= WINCONx_BURSTLEN_4WORD;
 605        }
 606
 607        writel(val, ctx->regs + WINCON(win));
 608
 609        /* hardware window 0 doesn't support alpha channel. */
 610        if (win != 0) {
 611                /* OSD alpha */
 612                val = VIDISD14C_ALPHA0_R(0xf) |
 613                        VIDISD14C_ALPHA0_G(0xf) |
 614                        VIDISD14C_ALPHA0_B(0xf) |
 615                        VIDISD14C_ALPHA1_R(0xf) |
 616                        VIDISD14C_ALPHA1_G(0xf) |
 617                        VIDISD14C_ALPHA1_B(0xf);
 618
 619                writel(val, ctx->regs + VIDOSD_C(win));
 620
 621                val = VIDW_ALPHA_R(0xf) | VIDW_ALPHA_G(0xf) |
 622                        VIDW_ALPHA_G(0xf);
 623                writel(val, ctx->regs + VIDWnALPHA0(win));
 624                writel(val, ctx->regs + VIDWnALPHA1(win));
 625        }
 626}
 627
 628static void fimd_win_set_colkey(struct fimd_context *ctx, unsigned int win)
 629{
 630        unsigned int keycon0 = 0, keycon1 = 0;
 631
 632        keycon0 = ~(WxKEYCON0_KEYBL_EN | WxKEYCON0_KEYEN_F |
 633                        WxKEYCON0_DIRCON) | WxKEYCON0_COMPKEY(0);
 634
 635        keycon1 = WxKEYCON1_COLVAL(0xffffffff);
 636
 637        writel(keycon0, ctx->regs + WKEYCON0_BASE(win));
 638        writel(keycon1, ctx->regs + WKEYCON1_BASE(win));
 639}
 640
 641/**
 642 * shadow_protect_win() - disable updating values from shadow registers at vsync
 643 *
 644 * @win: window to protect registers for
 645 * @protect: 1 to protect (disable updates)
 646 */
 647static void fimd_shadow_protect_win(struct fimd_context *ctx,
 648                                    unsigned int win, bool protect)
 649{
 650        u32 reg, bits, val;
 651
 652        /*
 653         * SHADOWCON/PRTCON register is used for enabling timing.
 654         *
 655         * for example, once only width value of a register is set,
 656         * if the dma is started then fimd hardware could malfunction so
 657         * with protect window setting, the register fields with prefix '_F'
 658         * wouldn't be updated at vsync also but updated once unprotect window
 659         * is set.
 660         */
 661
 662        if (ctx->driver_data->has_shadowcon) {
 663                reg = SHADOWCON;
 664                bits = SHADOWCON_WINx_PROTECT(win);
 665        } else {
 666                reg = PRTCON;
 667                bits = PRTCON_PROTECT;
 668        }
 669
 670        val = readl(ctx->regs + reg);
 671        if (protect)
 672                val |= bits;
 673        else
 674                val &= ~bits;
 675        writel(val, ctx->regs + reg);
 676}
 677
 678static void fimd_atomic_begin(struct exynos_drm_crtc *crtc)
 679{
 680        struct fimd_context *ctx = crtc->ctx;
 681        int i;
 682
 683        if (ctx->suspended)
 684                return;
 685
 686        for (i = 0; i < WINDOWS_NR; i++)
 687                fimd_shadow_protect_win(ctx, i, true);
 688}
 689
 690static void fimd_atomic_flush(struct exynos_drm_crtc *crtc)
 691{
 692        struct fimd_context *ctx = crtc->ctx;
 693        int i;
 694
 695        if (ctx->suspended)
 696                return;
 697
 698        for (i = 0; i < WINDOWS_NR; i++)
 699                fimd_shadow_protect_win(ctx, i, false);
 700
 701        exynos_crtc_handle_event(crtc);
 702}
 703
 704static void fimd_update_plane(struct exynos_drm_crtc *crtc,
 705                              struct exynos_drm_plane *plane)
 706{
 707        struct exynos_drm_plane_state *state =
 708                                to_exynos_plane_state(plane->base.state);
 709        struct fimd_context *ctx = crtc->ctx;
 710        struct drm_framebuffer *fb = state->base.fb;
 711        dma_addr_t dma_addr;
 712        unsigned long val, size, offset;
 713        unsigned int last_x, last_y, buf_offsize, line_size;
 714        unsigned int win = plane->index;
 715        unsigned int cpp = fb->format->cpp[0];
 716        unsigned int pitch = fb->pitches[0];
 717
 718        if (ctx->suspended)
 719                return;
 720
 721        offset = state->src.x * cpp;
 722        offset += state->src.y * pitch;
 723
 724        /* buffer start address */
 725        dma_addr = exynos_drm_fb_dma_addr(fb, 0) + offset;
 726        val = (unsigned long)dma_addr;
 727        writel(val, ctx->regs + VIDWx_BUF_START(win, 0));
 728
 729        /* buffer end address */
 730        size = pitch * state->crtc.h;
 731        val = (unsigned long)(dma_addr + size);
 732        writel(val, ctx->regs + VIDWx_BUF_END(win, 0));
 733
 734        DRM_DEBUG_KMS("start addr = 0x%lx, end addr = 0x%lx, size = 0x%lx\n",
 735                        (unsigned long)dma_addr, val, size);
 736        DRM_DEBUG_KMS("ovl_width = %d, ovl_height = %d\n",
 737                        state->crtc.w, state->crtc.h);
 738
 739        /* buffer size */
 740        buf_offsize = pitch - (state->crtc.w * cpp);
 741        line_size = state->crtc.w * cpp;
 742        val = VIDW_BUF_SIZE_OFFSET(buf_offsize) |
 743                VIDW_BUF_SIZE_PAGEWIDTH(line_size) |
 744                VIDW_BUF_SIZE_OFFSET_E(buf_offsize) |
 745                VIDW_BUF_SIZE_PAGEWIDTH_E(line_size);
 746        writel(val, ctx->regs + VIDWx_BUF_SIZE(win, 0));
 747
 748        /* OSD position */
 749        val = VIDOSDxA_TOPLEFT_X(state->crtc.x) |
 750                VIDOSDxA_TOPLEFT_Y(state->crtc.y) |
 751                VIDOSDxA_TOPLEFT_X_E(state->crtc.x) |
 752                VIDOSDxA_TOPLEFT_Y_E(state->crtc.y);
 753        writel(val, ctx->regs + VIDOSD_A(win));
 754
 755        last_x = state->crtc.x + state->crtc.w;
 756        if (last_x)
 757                last_x--;
 758        last_y = state->crtc.y + state->crtc.h;
 759        if (last_y)
 760                last_y--;
 761
 762        val = VIDOSDxB_BOTRIGHT_X(last_x) | VIDOSDxB_BOTRIGHT_Y(last_y) |
 763                VIDOSDxB_BOTRIGHT_X_E(last_x) | VIDOSDxB_BOTRIGHT_Y_E(last_y);
 764
 765        writel(val, ctx->regs + VIDOSD_B(win));
 766
 767        DRM_DEBUG_KMS("osd pos: tx = %d, ty = %d, bx = %d, by = %d\n",
 768                        state->crtc.x, state->crtc.y, last_x, last_y);
 769
 770        /* OSD size */
 771        if (win != 3 && win != 4) {
 772                u32 offset = VIDOSD_D(win);
 773                if (win == 0)
 774                        offset = VIDOSD_C(win);
 775                val = state->crtc.w * state->crtc.h;
 776                writel(val, ctx->regs + offset);
 777
 778                DRM_DEBUG_KMS("osd size = 0x%x\n", (unsigned int)val);
 779        }
 780
 781        fimd_win_set_pixfmt(ctx, win, fb->format->format, state->src.w);
 782
 783        /* hardware window 0 doesn't support color key. */
 784        if (win != 0)
 785                fimd_win_set_colkey(ctx, win);
 786
 787        fimd_enable_video_output(ctx, win, true);
 788
 789        if (ctx->driver_data->has_shadowcon)
 790                fimd_enable_shadow_channel_path(ctx, win, true);
 791
 792        if (ctx->i80_if)
 793                atomic_set(&ctx->win_updated, 1);
 794}
 795
 796static void fimd_disable_plane(struct exynos_drm_crtc *crtc,
 797                               struct exynos_drm_plane *plane)
 798{
 799        struct fimd_context *ctx = crtc->ctx;
 800        unsigned int win = plane->index;
 801
 802        if (ctx->suspended)
 803                return;
 804
 805        fimd_enable_video_output(ctx, win, false);
 806
 807        if (ctx->driver_data->has_shadowcon)
 808                fimd_enable_shadow_channel_path(ctx, win, false);
 809}
 810
 811static void fimd_enable(struct exynos_drm_crtc *crtc)
 812{
 813        struct fimd_context *ctx = crtc->ctx;
 814
 815        if (!ctx->suspended)
 816                return;
 817
 818        ctx->suspended = false;
 819
 820        pm_runtime_get_sync(ctx->dev);
 821
 822        /* if vblank was enabled status, enable it again. */
 823        if (test_and_clear_bit(0, &ctx->irq_flags))
 824                fimd_enable_vblank(ctx->crtc);
 825
 826        fimd_commit(ctx->crtc);
 827}
 828
 829static void fimd_disable(struct exynos_drm_crtc *crtc)
 830{
 831        struct fimd_context *ctx = crtc->ctx;
 832        int i;
 833
 834        if (ctx->suspended)
 835                return;
 836
 837        /*
 838         * We need to make sure that all windows are disabled before we
 839         * suspend that connector. Otherwise we might try to scan from
 840         * a destroyed buffer later.
 841         */
 842        for (i = 0; i < WINDOWS_NR; i++)
 843                fimd_disable_plane(crtc, &ctx->planes[i]);
 844
 845        fimd_enable_vblank(crtc);
 846        fimd_wait_for_vblank(crtc);
 847        fimd_disable_vblank(crtc);
 848
 849        writel(0, ctx->regs + VIDCON0);
 850
 851        pm_runtime_put_sync(ctx->dev);
 852        ctx->suspended = true;
 853}
 854
 855static void fimd_trigger(struct device *dev)
 856{
 857        struct fimd_context *ctx = dev_get_drvdata(dev);
 858        const struct fimd_driver_data *driver_data = ctx->driver_data;
 859        void *timing_base = ctx->regs + driver_data->timing_base;
 860        u32 reg;
 861
 862         /*
 863          * Skips triggering if in triggering state, because multiple triggering
 864          * requests can cause panel reset.
 865          */
 866        if (atomic_read(&ctx->triggering))
 867                return;
 868
 869        /* Enters triggering mode */
 870        atomic_set(&ctx->triggering, 1);
 871
 872        reg = readl(timing_base + TRIGCON);
 873        reg |= (TRGMODE_ENABLE | SWTRGCMD_ENABLE);
 874        writel(reg, timing_base + TRIGCON);
 875
 876        /*
 877         * Exits triggering mode if vblank is not enabled yet, because when the
 878         * VIDINTCON0 register is not set, it can not exit from triggering mode.
 879         */
 880        if (!test_bit(0, &ctx->irq_flags))
 881                atomic_set(&ctx->triggering, 0);
 882}
 883
 884static void fimd_te_handler(struct exynos_drm_crtc *crtc)
 885{
 886        struct fimd_context *ctx = crtc->ctx;
 887        u32 trg_type = ctx->driver_data->trg_type;
 888
 889        /* Checks the crtc is detached already from encoder */
 890        if (!ctx->drm_dev)
 891                return;
 892
 893        if (trg_type == I80_HW_TRG)
 894                goto out;
 895
 896        /*
 897         * If there is a page flip request, triggers and handles the page flip
 898         * event so that current fb can be updated into panel GRAM.
 899         */
 900        if (atomic_add_unless(&ctx->win_updated, -1, 0))
 901                fimd_trigger(ctx->dev);
 902
 903out:
 904        /* Wakes up vsync event queue */
 905        if (atomic_read(&ctx->wait_vsync_event)) {
 906                atomic_set(&ctx->wait_vsync_event, 0);
 907                wake_up(&ctx->wait_vsync_queue);
 908        }
 909
 910        if (test_bit(0, &ctx->irq_flags))
 911                drm_crtc_handle_vblank(&ctx->crtc->base);
 912}
 913
 914static void fimd_dp_clock_enable(struct exynos_drm_clk *clk, bool enable)
 915{
 916        struct fimd_context *ctx = container_of(clk, struct fimd_context,
 917                                                dp_clk);
 918        u32 val = enable ? DP_MIE_CLK_DP_ENABLE : DP_MIE_CLK_DISABLE;
 919        writel(val, ctx->regs + DP_MIE_CLKCON);
 920}
 921
 922static const struct exynos_drm_crtc_ops fimd_crtc_ops = {
 923        .enable = fimd_enable,
 924        .disable = fimd_disable,
 925        .enable_vblank = fimd_enable_vblank,
 926        .disable_vblank = fimd_disable_vblank,
 927        .atomic_begin = fimd_atomic_begin,
 928        .update_plane = fimd_update_plane,
 929        .disable_plane = fimd_disable_plane,
 930        .atomic_flush = fimd_atomic_flush,
 931        .atomic_check = fimd_atomic_check,
 932        .te_handler = fimd_te_handler,
 933};
 934
 935static irqreturn_t fimd_irq_handler(int irq, void *dev_id)
 936{
 937        struct fimd_context *ctx = (struct fimd_context *)dev_id;
 938        u32 val, clear_bit;
 939
 940        val = readl(ctx->regs + VIDINTCON1);
 941
 942        clear_bit = ctx->i80_if ? VIDINTCON1_INT_I80 : VIDINTCON1_INT_FRAME;
 943        if (val & clear_bit)
 944                writel(clear_bit, ctx->regs + VIDINTCON1);
 945
 946        /* check the crtc is detached already from encoder */
 947        if (!ctx->drm_dev)
 948                goto out;
 949
 950        if (!ctx->i80_if)
 951                drm_crtc_handle_vblank(&ctx->crtc->base);
 952
 953        if (ctx->i80_if) {
 954                /* Exits triggering mode */
 955                atomic_set(&ctx->triggering, 0);
 956        } else {
 957                /* set wait vsync event to zero and wake up queue. */
 958                if (atomic_read(&ctx->wait_vsync_event)) {
 959                        atomic_set(&ctx->wait_vsync_event, 0);
 960                        wake_up(&ctx->wait_vsync_queue);
 961                }
 962        }
 963
 964out:
 965        return IRQ_HANDLED;
 966}
 967
 968static int fimd_bind(struct device *dev, struct device *master, void *data)
 969{
 970        struct fimd_context *ctx = dev_get_drvdata(dev);
 971        struct drm_device *drm_dev = data;
 972        struct exynos_drm_plane *exynos_plane;
 973        unsigned int i;
 974        int ret;
 975
 976        ctx->drm_dev = drm_dev;
 977
 978        for (i = 0; i < WINDOWS_NR; i++) {
 979                ctx->configs[i].pixel_formats = fimd_formats;
 980                ctx->configs[i].num_pixel_formats = ARRAY_SIZE(fimd_formats);
 981                ctx->configs[i].zpos = i;
 982                ctx->configs[i].type = fimd_win_types[i];
 983                ret = exynos_plane_init(drm_dev, &ctx->planes[i], i,
 984                                        &ctx->configs[i]);
 985                if (ret)
 986                        return ret;
 987        }
 988
 989        exynos_plane = &ctx->planes[DEFAULT_WIN];
 990        ctx->crtc = exynos_drm_crtc_create(drm_dev, &exynos_plane->base,
 991                        EXYNOS_DISPLAY_TYPE_LCD, &fimd_crtc_ops, ctx);
 992        if (IS_ERR(ctx->crtc))
 993                return PTR_ERR(ctx->crtc);
 994
 995        if (ctx->driver_data->has_dp_clk) {
 996                ctx->dp_clk.enable = fimd_dp_clock_enable;
 997                ctx->crtc->pipe_clk = &ctx->dp_clk;
 998        }
 999
1000        if (ctx->encoder)
1001                exynos_dpi_bind(drm_dev, ctx->encoder);
1002
1003        if (is_drm_iommu_supported(drm_dev))
1004                fimd_clear_channels(ctx->crtc);
1005
1006        return drm_iommu_attach_device(drm_dev, dev);
1007}
1008
1009static void fimd_unbind(struct device *dev, struct device *master,
1010                        void *data)
1011{
1012        struct fimd_context *ctx = dev_get_drvdata(dev);
1013
1014        fimd_disable(ctx->crtc);
1015
1016        drm_iommu_detach_device(ctx->drm_dev, ctx->dev);
1017
1018        if (ctx->encoder)
1019                exynos_dpi_remove(ctx->encoder);
1020}
1021
1022static const struct component_ops fimd_component_ops = {
1023        .bind   = fimd_bind,
1024        .unbind = fimd_unbind,
1025};
1026
1027static int fimd_probe(struct platform_device *pdev)
1028{
1029        struct device *dev = &pdev->dev;
1030        struct fimd_context *ctx;
1031        struct device_node *i80_if_timings;
1032        struct resource *res;
1033        int ret;
1034
1035        if (!dev->of_node)
1036                return -ENODEV;
1037
1038        ctx = devm_kzalloc(dev, sizeof(*ctx), GFP_KERNEL);
1039        if (!ctx)
1040                return -ENOMEM;
1041
1042        ctx->dev = dev;
1043        ctx->suspended = true;
1044        ctx->driver_data = of_device_get_match_data(dev);
1045
1046        if (of_property_read_bool(dev->of_node, "samsung,invert-vden"))
1047                ctx->vidcon1 |= VIDCON1_INV_VDEN;
1048        if (of_property_read_bool(dev->of_node, "samsung,invert-vclk"))
1049                ctx->vidcon1 |= VIDCON1_INV_VCLK;
1050
1051        i80_if_timings = of_get_child_by_name(dev->of_node, "i80-if-timings");
1052        if (i80_if_timings) {
1053                u32 val;
1054
1055                ctx->i80_if = true;
1056
1057                if (ctx->driver_data->has_vidoutcon)
1058                        ctx->vidout_con |= VIDOUT_CON_F_I80_LDI0;
1059                else
1060                        ctx->vidcon0 |= VIDCON0_VIDOUT_I80_LDI0;
1061                /*
1062                 * The user manual describes that this "DSI_EN" bit is required
1063                 * to enable I80 24-bit data interface.
1064                 */
1065                ctx->vidcon0 |= VIDCON0_DSI_EN;
1066
1067                if (of_property_read_u32(i80_if_timings, "cs-setup", &val))
1068                        val = 0;
1069                ctx->i80ifcon = LCD_CS_SETUP(val);
1070                if (of_property_read_u32(i80_if_timings, "wr-setup", &val))
1071                        val = 0;
1072                ctx->i80ifcon |= LCD_WR_SETUP(val);
1073                if (of_property_read_u32(i80_if_timings, "wr-active", &val))
1074                        val = 1;
1075                ctx->i80ifcon |= LCD_WR_ACTIVE(val);
1076                if (of_property_read_u32(i80_if_timings, "wr-hold", &val))
1077                        val = 0;
1078                ctx->i80ifcon |= LCD_WR_HOLD(val);
1079        }
1080        of_node_put(i80_if_timings);
1081
1082        ctx->sysreg = syscon_regmap_lookup_by_phandle(dev->of_node,
1083                                                        "samsung,sysreg");
1084        if (IS_ERR(ctx->sysreg)) {
1085                dev_warn(dev, "failed to get system register.\n");
1086                ctx->sysreg = NULL;
1087        }
1088
1089        ctx->bus_clk = devm_clk_get(dev, "fimd");
1090        if (IS_ERR(ctx->bus_clk)) {
1091                dev_err(dev, "failed to get bus clock\n");
1092                return PTR_ERR(ctx->bus_clk);
1093        }
1094
1095        ctx->lcd_clk = devm_clk_get(dev, "sclk_fimd");
1096        if (IS_ERR(ctx->lcd_clk)) {
1097                dev_err(dev, "failed to get lcd clock\n");
1098                return PTR_ERR(ctx->lcd_clk);
1099        }
1100
1101        res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
1102
1103        ctx->regs = devm_ioremap_resource(dev, res);
1104        if (IS_ERR(ctx->regs))
1105                return PTR_ERR(ctx->regs);
1106
1107        res = platform_get_resource_byname(pdev, IORESOURCE_IRQ,
1108                                           ctx->i80_if ? "lcd_sys" : "vsync");
1109        if (!res) {
1110                dev_err(dev, "irq request failed.\n");
1111                return -ENXIO;
1112        }
1113
1114        ret = devm_request_irq(dev, res->start, fimd_irq_handler,
1115                                                        0, "drm_fimd", ctx);
1116        if (ret) {
1117                dev_err(dev, "irq request failed.\n");
1118                return ret;
1119        }
1120
1121        init_waitqueue_head(&ctx->wait_vsync_queue);
1122        atomic_set(&ctx->wait_vsync_event, 0);
1123
1124        platform_set_drvdata(pdev, ctx);
1125
1126        ctx->encoder = exynos_dpi_probe(dev);
1127        if (IS_ERR(ctx->encoder))
1128                return PTR_ERR(ctx->encoder);
1129
1130        pm_runtime_enable(dev);
1131
1132        ret = component_add(dev, &fimd_component_ops);
1133        if (ret)
1134                goto err_disable_pm_runtime;
1135
1136        return ret;
1137
1138err_disable_pm_runtime:
1139        pm_runtime_disable(dev);
1140
1141        return ret;
1142}
1143
1144static int fimd_remove(struct platform_device *pdev)
1145{
1146        pm_runtime_disable(&pdev->dev);
1147
1148        component_del(&pdev->dev, &fimd_component_ops);
1149
1150        return 0;
1151}
1152
1153#ifdef CONFIG_PM
1154static int exynos_fimd_suspend(struct device *dev)
1155{
1156        struct fimd_context *ctx = dev_get_drvdata(dev);
1157
1158        clk_disable_unprepare(ctx->lcd_clk);
1159        clk_disable_unprepare(ctx->bus_clk);
1160
1161        return 0;
1162}
1163
1164static int exynos_fimd_resume(struct device *dev)
1165{
1166        struct fimd_context *ctx = dev_get_drvdata(dev);
1167        int ret;
1168
1169        ret = clk_prepare_enable(ctx->bus_clk);
1170        if (ret < 0) {
1171                DRM_ERROR("Failed to prepare_enable the bus clk [%d]\n", ret);
1172                return ret;
1173        }
1174
1175        ret = clk_prepare_enable(ctx->lcd_clk);
1176        if  (ret < 0) {
1177                DRM_ERROR("Failed to prepare_enable the lcd clk [%d]\n", ret);
1178                return ret;
1179        }
1180
1181        return 0;
1182}
1183#endif
1184
1185static const struct dev_pm_ops exynos_fimd_pm_ops = {
1186        SET_RUNTIME_PM_OPS(exynos_fimd_suspend, exynos_fimd_resume, NULL)
1187};
1188
1189struct platform_driver fimd_driver = {
1190        .probe          = fimd_probe,
1191        .remove         = fimd_remove,
1192        .driver         = {
1193                .name   = "exynos4-fb",
1194                .owner  = THIS_MODULE,
1195                .pm     = &exynos_fimd_pm_ops,
1196                .of_match_table = fimd_driver_dt_match,
1197        },
1198};
1199