1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22#include "cx231xx.h"
23#include <linux/kernel.h>
24#include <linux/slab.h>
25
26#include <media/v4l2-common.h>
27#include <media/videobuf-vmalloc.h>
28#include <media/tuner.h>
29
30#include "xc5000.h"
31#include "s5h1432.h"
32#include "tda18271.h"
33#include "s5h1411.h"
34#include "lgdt3305.h"
35#include "si2165.h"
36#include "si2168.h"
37#include "mb86a20s.h"
38#include "si2157.h"
39#include "lgdt3306a.h"
40#include "r820t.h"
41#include "mn88473.h"
42
43MODULE_DESCRIPTION("driver for cx231xx based DVB cards");
44MODULE_AUTHOR("Srinivasa Deevi <srinivasa.deevi@conexant.com>");
45MODULE_LICENSE("GPL");
46
47static unsigned int debug;
48module_param(debug, int, 0644);
49MODULE_PARM_DESC(debug, "enable debug messages [dvb]");
50
51DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
52
53#define CX231XX_DVB_NUM_BUFS 5
54#define CX231XX_DVB_MAX_PACKETSIZE 564
55#define CX231XX_DVB_MAX_PACKETS 64
56
57struct cx231xx_dvb {
58 struct dvb_frontend *frontend;
59
60
61 struct mutex lock;
62 int nfeeds;
63
64
65 struct dvb_adapter adapter;
66 struct dvb_demux demux;
67 struct dmxdev dmxdev;
68 struct dmx_frontend fe_hw;
69 struct dmx_frontend fe_mem;
70 struct dvb_net net;
71 struct i2c_client *i2c_client_demod;
72 struct i2c_client *i2c_client_tuner;
73};
74
75static struct s5h1432_config dvico_s5h1432_config = {
76 .output_mode = S5H1432_SERIAL_OUTPUT,
77 .gpio = S5H1432_GPIO_ON,
78 .qam_if = S5H1432_IF_4000,
79 .vsb_if = S5H1432_IF_4000,
80 .inversion = S5H1432_INVERSION_OFF,
81 .status_mode = S5H1432_DEMODLOCKING,
82 .mpeg_timing = S5H1432_MPEGTIMING_CONTINOUS_NONINVERTING_CLOCK,
83};
84
85static struct tda18271_std_map cnxt_rde253s_tda18271_std_map = {
86 .dvbt_6 = { .if_freq = 4000, .agc_mode = 3, .std = 4,
87 .if_lvl = 1, .rfagc_top = 0x37, },
88 .dvbt_7 = { .if_freq = 4000, .agc_mode = 3, .std = 5,
89 .if_lvl = 1, .rfagc_top = 0x37, },
90 .dvbt_8 = { .if_freq = 4000, .agc_mode = 3, .std = 6,
91 .if_lvl = 1, .rfagc_top = 0x37, },
92};
93
94static struct tda18271_std_map mb86a20s_tda18271_config = {
95 .dvbt_6 = { .if_freq = 4000, .agc_mode = 3, .std = 4,
96 .if_lvl = 0, .rfagc_top = 0x37, },
97};
98
99static struct tda18271_config cnxt_rde253s_tunerconfig = {
100 .std_map = &cnxt_rde253s_tda18271_std_map,
101 .gate = TDA18271_GATE_ANALOG,
102};
103
104static struct s5h1411_config tda18271_s5h1411_config = {
105 .output_mode = S5H1411_SERIAL_OUTPUT,
106 .gpio = S5H1411_GPIO_OFF,
107 .vsb_if = S5H1411_IF_3250,
108 .qam_if = S5H1411_IF_4000,
109 .inversion = S5H1411_INVERSION_ON,
110 .status_mode = S5H1411_DEMODLOCKING,
111 .mpeg_timing = S5H1411_MPEGTIMING_CONTINOUS_NONINVERTING_CLOCK,
112};
113static struct s5h1411_config xc5000_s5h1411_config = {
114 .output_mode = S5H1411_SERIAL_OUTPUT,
115 .gpio = S5H1411_GPIO_OFF,
116 .vsb_if = S5H1411_IF_3250,
117 .qam_if = S5H1411_IF_3250,
118 .inversion = S5H1411_INVERSION_OFF,
119 .status_mode = S5H1411_DEMODLOCKING,
120 .mpeg_timing = S5H1411_MPEGTIMING_CONTINOUS_NONINVERTING_CLOCK,
121};
122
123static struct lgdt3305_config hcw_lgdt3305_config = {
124 .i2c_addr = 0x0e,
125 .mpeg_mode = LGDT3305_MPEG_SERIAL,
126 .tpclk_edge = LGDT3305_TPCLK_FALLING_EDGE,
127 .tpvalid_polarity = LGDT3305_TP_VALID_HIGH,
128 .deny_i2c_rptr = 1,
129 .spectral_inversion = 1,
130 .qam_if_khz = 4000,
131 .vsb_if_khz = 3250,
132};
133
134static struct tda18271_std_map hauppauge_tda18271_std_map = {
135 .atsc_6 = { .if_freq = 3250, .agc_mode = 3, .std = 4,
136 .if_lvl = 1, .rfagc_top = 0x58, },
137 .qam_6 = { .if_freq = 4000, .agc_mode = 3, .std = 5,
138 .if_lvl = 1, .rfagc_top = 0x58, },
139};
140
141static struct tda18271_config hcw_tda18271_config = {
142 .std_map = &hauppauge_tda18271_std_map,
143 .gate = TDA18271_GATE_DIGITAL,
144};
145
146static const struct mb86a20s_config pv_mb86a20s_config = {
147 .demod_address = 0x10,
148 .is_serial = true,
149};
150
151static struct tda18271_config pv_tda18271_config = {
152 .std_map = &mb86a20s_tda18271_config,
153 .gate = TDA18271_GATE_DIGITAL,
154 .small_i2c = TDA18271_03_BYTE_CHUNK_INIT,
155};
156
157static struct lgdt3306a_config hauppauge_955q_lgdt3306a_config = {
158 .i2c_addr = 0x59,
159 .qam_if_khz = 4000,
160 .vsb_if_khz = 3250,
161 .deny_i2c_rptr = 1,
162 .spectral_inversion = 1,
163 .mpeg_mode = LGDT3306A_MPEG_SERIAL,
164 .tpclk_edge = LGDT3306A_TPCLK_RISING_EDGE,
165 .tpvalid_polarity = LGDT3306A_TP_VALID_HIGH,
166 .xtalMHz = 25,
167};
168
169static struct r820t_config astrometa_t2hybrid_r820t_config = {
170 .i2c_addr = 0x3a,
171 .xtal = 16000000,
172 .rafael_chip = CHIP_R828D,
173 .max_i2c_msg_len = 2,
174};
175
176static inline void print_err_status(struct cx231xx *dev, int packet, int status)
177{
178 char *errmsg = "Unknown";
179
180 switch (status) {
181 case -ENOENT:
182 errmsg = "unlinked synchronuously";
183 break;
184 case -ECONNRESET:
185 errmsg = "unlinked asynchronuously";
186 break;
187 case -ENOSR:
188 errmsg = "Buffer error (overrun)";
189 break;
190 case -EPIPE:
191 errmsg = "Stalled (device not responding)";
192 break;
193 case -EOVERFLOW:
194 errmsg = "Babble (bad cable?)";
195 break;
196 case -EPROTO:
197 errmsg = "Bit-stuff error (bad cable?)";
198 break;
199 case -EILSEQ:
200 errmsg = "CRC/Timeout (could be anything)";
201 break;
202 case -ETIME:
203 errmsg = "Device does not respond";
204 break;
205 }
206 if (packet < 0) {
207 dev_dbg(dev->dev,
208 "URB status %d [%s].\n", status, errmsg);
209 } else {
210 dev_dbg(dev->dev,
211 "URB packet %d, status %d [%s].\n",
212 packet, status, errmsg);
213 }
214}
215
216static inline int dvb_isoc_copy(struct cx231xx *dev, struct urb *urb)
217{
218 int i;
219
220 if (!dev)
221 return 0;
222
223 if (dev->state & DEV_DISCONNECTED)
224 return 0;
225
226 if (urb->status < 0) {
227 print_err_status(dev, -1, urb->status);
228 if (urb->status == -ENOENT)
229 return 0;
230 }
231
232 for (i = 0; i < urb->number_of_packets; i++) {
233 int status = urb->iso_frame_desc[i].status;
234
235 if (status < 0) {
236 print_err_status(dev, i, status);
237 if (urb->iso_frame_desc[i].status != -EPROTO)
238 continue;
239 }
240
241 dvb_dmx_swfilter(&dev->dvb->demux,
242 urb->transfer_buffer +
243 urb->iso_frame_desc[i].offset,
244 urb->iso_frame_desc[i].actual_length);
245 }
246
247 return 0;
248}
249
250static inline int dvb_bulk_copy(struct cx231xx *dev, struct urb *urb)
251{
252 if (!dev)
253 return 0;
254
255 if (dev->state & DEV_DISCONNECTED)
256 return 0;
257
258 if (urb->status < 0) {
259 print_err_status(dev, -1, urb->status);
260 if (urb->status == -ENOENT)
261 return 0;
262 }
263
264
265 dvb_dmx_swfilter(&dev->dvb->demux,
266 urb->transfer_buffer, urb->actual_length);
267
268 return 0;
269}
270
271static int start_streaming(struct cx231xx_dvb *dvb)
272{
273 int rc;
274 struct cx231xx *dev = dvb->adapter.priv;
275
276 if (dev->USE_ISO) {
277 dev_dbg(dev->dev, "DVB transfer mode is ISO.\n");
278 cx231xx_set_alt_setting(dev, INDEX_TS1, 4);
279 rc = cx231xx_set_mode(dev, CX231XX_DIGITAL_MODE);
280 if (rc < 0)
281 return rc;
282 dev->mode_tv = 1;
283 return cx231xx_init_isoc(dev, CX231XX_DVB_MAX_PACKETS,
284 CX231XX_DVB_NUM_BUFS,
285 dev->ts1_mode.max_pkt_size,
286 dvb_isoc_copy);
287 } else {
288 dev_dbg(dev->dev, "DVB transfer mode is BULK.\n");
289 cx231xx_set_alt_setting(dev, INDEX_TS1, 0);
290 rc = cx231xx_set_mode(dev, CX231XX_DIGITAL_MODE);
291 if (rc < 0)
292 return rc;
293 dev->mode_tv = 1;
294 return cx231xx_init_bulk(dev, CX231XX_DVB_MAX_PACKETS,
295 CX231XX_DVB_NUM_BUFS,
296 dev->ts1_mode.max_pkt_size,
297 dvb_bulk_copy);
298 }
299
300}
301
302static int stop_streaming(struct cx231xx_dvb *dvb)
303{
304 struct cx231xx *dev = dvb->adapter.priv;
305
306 if (dev->USE_ISO)
307 cx231xx_uninit_isoc(dev);
308 else
309 cx231xx_uninit_bulk(dev);
310
311 cx231xx_set_mode(dev, CX231XX_SUSPEND);
312
313 return 0;
314}
315
316static int start_feed(struct dvb_demux_feed *feed)
317{
318 struct dvb_demux *demux = feed->demux;
319 struct cx231xx_dvb *dvb = demux->priv;
320 int rc, ret;
321
322 if (!demux->dmx.frontend)
323 return -EINVAL;
324
325 mutex_lock(&dvb->lock);
326 dvb->nfeeds++;
327 rc = dvb->nfeeds;
328
329 if (dvb->nfeeds == 1) {
330 ret = start_streaming(dvb);
331 if (ret < 0)
332 rc = ret;
333 }
334
335 mutex_unlock(&dvb->lock);
336 return rc;
337}
338
339static int stop_feed(struct dvb_demux_feed *feed)
340{
341 struct dvb_demux *demux = feed->demux;
342 struct cx231xx_dvb *dvb = demux->priv;
343 int err = 0;
344
345 mutex_lock(&dvb->lock);
346 dvb->nfeeds--;
347
348 if (0 == dvb->nfeeds)
349 err = stop_streaming(dvb);
350
351 mutex_unlock(&dvb->lock);
352 return err;
353}
354
355
356static int cx231xx_dvb_bus_ctrl(struct dvb_frontend *fe, int acquire)
357{
358 struct cx231xx *dev = fe->dvb->priv;
359
360 if (acquire)
361 return cx231xx_set_mode(dev, CX231XX_DIGITAL_MODE);
362 else
363 return cx231xx_set_mode(dev, CX231XX_SUSPEND);
364}
365
366
367
368static struct xc5000_config cnxt_rde250_tunerconfig = {
369 .i2c_address = 0x61,
370 .if_khz = 4000,
371};
372static struct xc5000_config cnxt_rdu250_tunerconfig = {
373 .i2c_address = 0x61,
374 .if_khz = 3250,
375};
376
377
378#if 0
379static int attach_xc5000(u8 addr, struct cx231xx *dev)
380{
381
382 struct dvb_frontend *fe;
383 struct xc5000_config cfg;
384
385 memset(&cfg, 0, sizeof(cfg));
386 cfg.i2c_adap = cx231xx_get_i2c_adap(dev, dev->board.tuner_i2c_master);
387 cfg.i2c_addr = addr;
388
389 if (!dev->dvb->frontend) {
390 dev_err(dev->dev, "%s/2: dvb frontend not attached. Can't attach xc5000\n",
391 dev->name);
392 return -EINVAL;
393 }
394
395 fe = dvb_attach(xc5000_attach, dev->dvb->frontend, &cfg);
396 if (!fe) {
397 dev_err(dev->dev, "%s/2: xc5000 attach failed\n", dev->name);
398 dvb_frontend_detach(dev->dvb->frontend);
399 dev->dvb->frontend = NULL;
400 return -EINVAL;
401 }
402
403 dev_info(dev->dev, "%s/2: xc5000 attached\n", dev->name);
404
405 return 0;
406}
407#endif
408
409int cx231xx_set_analog_freq(struct cx231xx *dev, u32 freq)
410{
411 if ((dev->dvb != NULL) && (dev->dvb->frontend != NULL)) {
412
413 struct dvb_tuner_ops *dops = &dev->dvb->frontend->ops.tuner_ops;
414
415 if (dops->set_analog_params != NULL) {
416 struct analog_parameters params;
417
418 params.frequency = freq;
419 params.std = dev->norm;
420 params.mode = 0;
421
422
423
424 dops->set_analog_params(dev->dvb->frontend, ¶ms);
425 }
426
427 }
428
429 return 0;
430}
431
432int cx231xx_reset_analog_tuner(struct cx231xx *dev)
433{
434 int status = 0;
435
436 if ((dev->dvb != NULL) && (dev->dvb->frontend != NULL)) {
437
438 struct dvb_tuner_ops *dops = &dev->dvb->frontend->ops.tuner_ops;
439
440 if (dops->init != NULL && !dev->xc_fw_load_done) {
441
442 dev_dbg(dev->dev,
443 "Reloading firmware for XC5000\n");
444 status = dops->init(dev->dvb->frontend);
445 if (status == 0) {
446 dev->xc_fw_load_done = 1;
447 dev_dbg(dev->dev,
448 "XC5000 firmware download completed\n");
449 } else {
450 dev->xc_fw_load_done = 0;
451 dev_dbg(dev->dev,
452 "XC5000 firmware download failed !!!\n");
453 }
454 }
455
456 }
457
458 return status;
459}
460
461
462
463static int register_dvb(struct cx231xx_dvb *dvb,
464 struct module *module,
465 struct cx231xx *dev, struct device *device)
466{
467 int result;
468
469 mutex_init(&dvb->lock);
470
471
472
473 result = dvb_register_adapter(&dvb->adapter, dev->name, module, device,
474 adapter_nr);
475 if (result < 0) {
476 dev_warn(dev->dev,
477 "%s: dvb_register_adapter failed (errno = %d)\n",
478 dev->name, result);
479 goto fail_adapter;
480 }
481 dvb_register_media_controller(&dvb->adapter, dev->media_dev);
482
483
484 dvb->frontend->ops.ts_bus_ctrl = cx231xx_dvb_bus_ctrl;
485
486 dvb->adapter.priv = dev;
487
488
489 result = dvb_register_frontend(&dvb->adapter, dvb->frontend);
490 if (result < 0) {
491 dev_warn(dev->dev,
492 "%s: dvb_register_frontend failed (errno = %d)\n",
493 dev->name, result);
494 goto fail_frontend;
495 }
496
497
498 dvb->demux.dmx.capabilities =
499 DMX_TS_FILTERING | DMX_SECTION_FILTERING |
500 DMX_MEMORY_BASED_FILTERING;
501 dvb->demux.priv = dvb;
502 dvb->demux.filternum = 256;
503 dvb->demux.feednum = 256;
504 dvb->demux.start_feed = start_feed;
505 dvb->demux.stop_feed = stop_feed;
506
507 result = dvb_dmx_init(&dvb->demux);
508 if (result < 0) {
509 dev_warn(dev->dev,
510 "%s: dvb_dmx_init failed (errno = %d)\n",
511 dev->name, result);
512 goto fail_dmx;
513 }
514
515 dvb->dmxdev.filternum = 256;
516 dvb->dmxdev.demux = &dvb->demux.dmx;
517 dvb->dmxdev.capabilities = 0;
518 result = dvb_dmxdev_init(&dvb->dmxdev, &dvb->adapter);
519 if (result < 0) {
520 dev_warn(dev->dev,
521 "%s: dvb_dmxdev_init failed (errno = %d)\n",
522 dev->name, result);
523 goto fail_dmxdev;
524 }
525
526 dvb->fe_hw.source = DMX_FRONTEND_0;
527 result = dvb->demux.dmx.add_frontend(&dvb->demux.dmx, &dvb->fe_hw);
528 if (result < 0) {
529 dev_warn(dev->dev,
530 "%s: add_frontend failed (DMX_FRONTEND_0, errno = %d)\n",
531 dev->name, result);
532 goto fail_fe_hw;
533 }
534
535 dvb->fe_mem.source = DMX_MEMORY_FE;
536 result = dvb->demux.dmx.add_frontend(&dvb->demux.dmx, &dvb->fe_mem);
537 if (result < 0) {
538 dev_warn(dev->dev,
539 "%s: add_frontend failed (DMX_MEMORY_FE, errno = %d)\n",
540 dev->name, result);
541 goto fail_fe_mem;
542 }
543
544 result = dvb->demux.dmx.connect_frontend(&dvb->demux.dmx, &dvb->fe_hw);
545 if (result < 0) {
546 dev_warn(dev->dev,
547 "%s: connect_frontend failed (errno = %d)\n",
548 dev->name, result);
549 goto fail_fe_conn;
550 }
551
552
553 dvb_net_init(&dvb->adapter, &dvb->net, &dvb->demux.dmx);
554 result = dvb_create_media_graph(&dvb->adapter,
555 dev->tuner_type == TUNER_ABSENT);
556 if (result < 0)
557 goto fail_create_graph;
558
559 return 0;
560
561fail_create_graph:
562 dvb_net_release(&dvb->net);
563fail_fe_conn:
564 dvb->demux.dmx.remove_frontend(&dvb->demux.dmx, &dvb->fe_mem);
565fail_fe_mem:
566 dvb->demux.dmx.remove_frontend(&dvb->demux.dmx, &dvb->fe_hw);
567fail_fe_hw:
568 dvb_dmxdev_release(&dvb->dmxdev);
569fail_dmxdev:
570 dvb_dmx_release(&dvb->demux);
571fail_dmx:
572 dvb_unregister_frontend(dvb->frontend);
573fail_frontend:
574 dvb_frontend_detach(dvb->frontend);
575 dvb_unregister_adapter(&dvb->adapter);
576fail_adapter:
577 return result;
578}
579
580static void unregister_dvb(struct cx231xx_dvb *dvb)
581{
582 struct i2c_client *client;
583 dvb_net_release(&dvb->net);
584 dvb->demux.dmx.remove_frontend(&dvb->demux.dmx, &dvb->fe_mem);
585 dvb->demux.dmx.remove_frontend(&dvb->demux.dmx, &dvb->fe_hw);
586 dvb_dmxdev_release(&dvb->dmxdev);
587 dvb_dmx_release(&dvb->demux);
588 dvb_unregister_frontend(dvb->frontend);
589 dvb_frontend_detach(dvb->frontend);
590 dvb_unregister_adapter(&dvb->adapter);
591
592 client = dvb->i2c_client_tuner;
593 if (client) {
594 module_put(client->dev.driver->owner);
595 i2c_unregister_device(client);
596 }
597
598 client = dvb->i2c_client_demod;
599 if (client) {
600 module_put(client->dev.driver->owner);
601 i2c_unregister_device(client);
602 }
603}
604
605static int dvb_init(struct cx231xx *dev)
606{
607 int result = 0;
608 struct cx231xx_dvb *dvb;
609 struct i2c_adapter *tuner_i2c;
610 struct i2c_adapter *demod_i2c;
611
612 if (!dev->board.has_dvb) {
613
614 return 0;
615 }
616
617 dvb = kzalloc(sizeof(struct cx231xx_dvb), GFP_KERNEL);
618
619 if (dvb == NULL) {
620 dev_info(dev->dev,
621 "cx231xx_dvb: memory allocation failed\n");
622 return -ENOMEM;
623 }
624 dev->dvb = dvb;
625 dev->cx231xx_set_analog_freq = cx231xx_set_analog_freq;
626 dev->cx231xx_reset_analog_tuner = cx231xx_reset_analog_tuner;
627
628 tuner_i2c = cx231xx_get_i2c_adap(dev, dev->board.tuner_i2c_master);
629 demod_i2c = cx231xx_get_i2c_adap(dev, dev->board.demod_i2c_master);
630 mutex_lock(&dev->lock);
631 cx231xx_set_mode(dev, CX231XX_DIGITAL_MODE);
632 cx231xx_demod_reset(dev);
633
634 switch (dev->model) {
635 case CX231XX_BOARD_CNXT_CARRAERA:
636 case CX231XX_BOARD_CNXT_RDE_250:
637
638 dev->dvb->frontend = dvb_attach(s5h1432_attach,
639 &dvico_s5h1432_config,
640 demod_i2c);
641
642 if (dev->dvb->frontend == NULL) {
643 dev_err(dev->dev,
644 "Failed to attach s5h1432 front end\n");
645 result = -EINVAL;
646 goto out_free;
647 }
648
649
650 dvb->frontend->callback = cx231xx_tuner_callback;
651
652 if (!dvb_attach(xc5000_attach, dev->dvb->frontend,
653 tuner_i2c,
654 &cnxt_rde250_tunerconfig)) {
655 result = -EINVAL;
656 goto out_free;
657 }
658
659 break;
660 case CX231XX_BOARD_CNXT_SHELBY:
661 case CX231XX_BOARD_CNXT_RDU_250:
662
663 dev->dvb->frontend = dvb_attach(s5h1411_attach,
664 &xc5000_s5h1411_config,
665 demod_i2c);
666
667 if (dev->dvb->frontend == NULL) {
668 dev_err(dev->dev,
669 "Failed to attach s5h1411 front end\n");
670 result = -EINVAL;
671 goto out_free;
672 }
673
674
675 dvb->frontend->callback = cx231xx_tuner_callback;
676
677 if (!dvb_attach(xc5000_attach, dev->dvb->frontend,
678 tuner_i2c,
679 &cnxt_rdu250_tunerconfig)) {
680 result = -EINVAL;
681 goto out_free;
682 }
683 break;
684 case CX231XX_BOARD_CNXT_RDE_253S:
685
686 dev->dvb->frontend = dvb_attach(s5h1432_attach,
687 &dvico_s5h1432_config,
688 demod_i2c);
689
690 if (dev->dvb->frontend == NULL) {
691 dev_err(dev->dev,
692 "Failed to attach s5h1432 front end\n");
693 result = -EINVAL;
694 goto out_free;
695 }
696
697
698 dvb->frontend->callback = cx231xx_tuner_callback;
699
700 if (!dvb_attach(tda18271_attach, dev->dvb->frontend,
701 0x60, tuner_i2c,
702 &cnxt_rde253s_tunerconfig)) {
703 result = -EINVAL;
704 goto out_free;
705 }
706 break;
707 case CX231XX_BOARD_CNXT_RDU_253S:
708 case CX231XX_BOARD_KWORLD_UB445_USB_HYBRID:
709
710 dev->dvb->frontend = dvb_attach(s5h1411_attach,
711 &tda18271_s5h1411_config,
712 demod_i2c);
713
714 if (dev->dvb->frontend == NULL) {
715 dev_err(dev->dev,
716 "Failed to attach s5h1411 front end\n");
717 result = -EINVAL;
718 goto out_free;
719 }
720
721
722 dvb->frontend->callback = cx231xx_tuner_callback;
723
724 if (!dvb_attach(tda18271_attach, dev->dvb->frontend,
725 0x60, tuner_i2c,
726 &cnxt_rde253s_tunerconfig)) {
727 result = -EINVAL;
728 goto out_free;
729 }
730 break;
731 case CX231XX_BOARD_HAUPPAUGE_EXETER:
732
733 dev_info(dev->dev,
734 "%s: looking for tuner / demod on i2c bus: %d\n",
735 __func__, i2c_adapter_id(tuner_i2c));
736
737 dev->dvb->frontend = dvb_attach(lgdt3305_attach,
738 &hcw_lgdt3305_config,
739 demod_i2c);
740
741 if (dev->dvb->frontend == NULL) {
742 dev_err(dev->dev,
743 "Failed to attach LG3305 front end\n");
744 result = -EINVAL;
745 goto out_free;
746 }
747
748
749 dvb->frontend->callback = cx231xx_tuner_callback;
750
751 dvb_attach(tda18271_attach, dev->dvb->frontend,
752 0x60, tuner_i2c,
753 &hcw_tda18271_config);
754 break;
755
756 case CX231XX_BOARD_HAUPPAUGE_930C_HD_1113xx:
757 {
758 struct i2c_client *client;
759 struct i2c_board_info info;
760 struct si2165_platform_data si2165_pdata;
761
762
763 memset(&si2165_pdata, 0, sizeof(si2165_pdata));
764 si2165_pdata.fe = &dev->dvb->frontend;
765 si2165_pdata.chip_mode = SI2165_MODE_PLL_XTAL,
766 si2165_pdata.ref_freq_Hz = 16000000,
767
768 memset(&info, 0, sizeof(struct i2c_board_info));
769 strlcpy(info.type, "si2165", I2C_NAME_SIZE);
770 info.addr = 0x64;
771 info.platform_data = &si2165_pdata;
772 request_module(info.type);
773 client = i2c_new_device(demod_i2c, &info);
774 if (client == NULL || client->dev.driver == NULL || dev->dvb->frontend == NULL) {
775 dev_err(dev->dev,
776 "Failed to attach SI2165 front end\n");
777 result = -EINVAL;
778 goto out_free;
779 }
780
781 if (!try_module_get(client->dev.driver->owner)) {
782 i2c_unregister_device(client);
783 result = -ENODEV;
784 goto out_free;
785 }
786
787 dvb->i2c_client_demod = client;
788
789 dev->dvb->frontend->ops.i2c_gate_ctrl = NULL;
790
791
792 dvb->frontend->callback = cx231xx_tuner_callback;
793
794 dvb_attach(tda18271_attach, dev->dvb->frontend,
795 0x60,
796 tuner_i2c,
797 &hcw_tda18271_config);
798
799 dev->cx231xx_reset_analog_tuner = NULL;
800 break;
801 }
802 case CX231XX_BOARD_HAUPPAUGE_930C_HD_1114xx:
803 {
804 struct i2c_client *client;
805 struct i2c_board_info info;
806 struct si2165_platform_data si2165_pdata;
807 struct si2157_config si2157_config;
808
809
810 memset(&si2165_pdata, 0, sizeof(si2165_pdata));
811 si2165_pdata.fe = &dev->dvb->frontend;
812 si2165_pdata.chip_mode = SI2165_MODE_PLL_EXT,
813 si2165_pdata.ref_freq_Hz = 24000000,
814
815 memset(&info, 0, sizeof(struct i2c_board_info));
816 strlcpy(info.type, "si2165", I2C_NAME_SIZE);
817 info.addr = 0x64;
818 info.platform_data = &si2165_pdata;
819 request_module(info.type);
820 client = i2c_new_device(demod_i2c, &info);
821 if (client == NULL || client->dev.driver == NULL || dev->dvb->frontend == NULL) {
822 dev_err(dev->dev,
823 "Failed to attach SI2165 front end\n");
824 result = -EINVAL;
825 goto out_free;
826 }
827
828 if (!try_module_get(client->dev.driver->owner)) {
829 i2c_unregister_device(client);
830 result = -ENODEV;
831 goto out_free;
832 }
833
834 dvb->i2c_client_demod = client;
835
836 memset(&info, 0, sizeof(struct i2c_board_info));
837
838 dev->dvb->frontend->ops.i2c_gate_ctrl = NULL;
839
840
841 dvb->frontend->callback = cx231xx_tuner_callback;
842
843
844 memset(&si2157_config, 0, sizeof(si2157_config));
845 si2157_config.fe = dev->dvb->frontend;
846#ifdef CONFIG_MEDIA_CONTROLLER_DVB
847 si2157_config.mdev = dev->media_dev;
848#endif
849 si2157_config.if_port = 1;
850 si2157_config.inversion = true;
851 strlcpy(info.type, "si2157", I2C_NAME_SIZE);
852 info.addr = 0x60;
853 info.platform_data = &si2157_config;
854 request_module("si2157");
855
856 client = i2c_new_device(
857 tuner_i2c,
858 &info);
859 if (client == NULL || client->dev.driver == NULL) {
860 dvb_frontend_detach(dev->dvb->frontend);
861 result = -ENODEV;
862 goto out_free;
863 }
864
865 if (!try_module_get(client->dev.driver->owner)) {
866 i2c_unregister_device(client);
867 dvb_frontend_detach(dev->dvb->frontend);
868 result = -ENODEV;
869 goto out_free;
870 }
871
872 dev->cx231xx_reset_analog_tuner = NULL;
873
874 dev->dvb->i2c_client_tuner = client;
875 break;
876 }
877 case CX231XX_BOARD_HAUPPAUGE_955Q:
878 {
879 struct i2c_client *client;
880 struct i2c_board_info info;
881 struct si2157_config si2157_config;
882
883 memset(&info, 0, sizeof(struct i2c_board_info));
884
885 dev->dvb->frontend = dvb_attach(lgdt3306a_attach,
886 &hauppauge_955q_lgdt3306a_config,
887 demod_i2c
888 );
889
890 if (dev->dvb->frontend == NULL) {
891 dev_err(dev->dev,
892 "Failed to attach LGDT3306A frontend.\n");
893 result = -EINVAL;
894 goto out_free;
895 }
896
897 dev->dvb->frontend->ops.i2c_gate_ctrl = NULL;
898
899
900 dvb->frontend->callback = cx231xx_tuner_callback;
901
902
903 memset(&si2157_config, 0, sizeof(si2157_config));
904 si2157_config.fe = dev->dvb->frontend;
905#ifdef CONFIG_MEDIA_CONTROLLER_DVB
906 si2157_config.mdev = dev->media_dev;
907#endif
908 si2157_config.if_port = 1;
909 si2157_config.inversion = true;
910 strlcpy(info.type, "si2157", I2C_NAME_SIZE);
911 info.addr = 0x60;
912 info.platform_data = &si2157_config;
913 request_module("si2157");
914
915 client = i2c_new_device(
916 tuner_i2c,
917 &info);
918 if (client == NULL || client->dev.driver == NULL) {
919 dvb_frontend_detach(dev->dvb->frontend);
920 result = -ENODEV;
921 goto out_free;
922 }
923
924 if (!try_module_get(client->dev.driver->owner)) {
925 i2c_unregister_device(client);
926 dvb_frontend_detach(dev->dvb->frontend);
927 result = -ENODEV;
928 goto out_free;
929 }
930
931 dev->cx231xx_reset_analog_tuner = NULL;
932
933 dev->dvb->i2c_client_tuner = client;
934 break;
935 }
936 case CX231XX_BOARD_PV_PLAYTV_USB_HYBRID:
937 case CX231XX_BOARD_KWORLD_UB430_USB_HYBRID:
938
939 dev_info(dev->dev,
940 "%s: looking for demod on i2c bus: %d\n",
941 __func__, i2c_adapter_id(tuner_i2c));
942
943 dev->dvb->frontend = dvb_attach(mb86a20s_attach,
944 &pv_mb86a20s_config,
945 demod_i2c);
946
947 if (dev->dvb->frontend == NULL) {
948 dev_err(dev->dev,
949 "Failed to attach mb86a20s demod\n");
950 result = -EINVAL;
951 goto out_free;
952 }
953
954
955 dvb->frontend->callback = cx231xx_tuner_callback;
956
957 dvb_attach(tda18271_attach, dev->dvb->frontend,
958 0x60, tuner_i2c,
959 &pv_tda18271_config);
960 break;
961
962 case CX231XX_BOARD_EVROMEDIA_FULL_HYBRID_FULLHD:
963 {
964 struct si2157_config si2157_config = {};
965 struct si2168_config si2168_config = {};
966 struct i2c_board_info info = {};
967 struct i2c_client *client;
968 struct i2c_adapter *adapter;
969
970
971 si2168_config.ts_mode = SI2168_TS_SERIAL;
972 si2168_config.fe = &dev->dvb->frontend;
973 si2168_config.i2c_adapter = &adapter;
974 si2168_config.ts_clock_inv = true;
975
976 strlcpy(info.type, "si2168", sizeof(info.type));
977 info.addr = dev->board.demod_addr;
978 info.platform_data = &si2168_config;
979
980 request_module(info.type);
981 client = i2c_new_device(demod_i2c, &info);
982
983 if (client == NULL || client->dev.driver == NULL) {
984 result = -ENODEV;
985 goto out_free;
986 }
987
988 if (!try_module_get(client->dev.driver->owner)) {
989 i2c_unregister_device(client);
990 result = -ENODEV;
991 goto out_free;
992 }
993
994 dvb->i2c_client_demod = client;
995
996
997 si2157_config.fe = dev->dvb->frontend;
998#ifdef CONFIG_MEDIA_CONTROLLER_DVB
999 si2157_config.mdev = dev->media_dev;
1000#endif
1001 si2157_config.if_port = 1;
1002 si2157_config.inversion = false;
1003
1004 memset(&info, 0, sizeof(info));
1005 strlcpy(info.type, "si2157", sizeof(info.type));
1006 info.addr = dev->board.tuner_addr;
1007 info.platform_data = &si2157_config;
1008
1009 request_module(info.type);
1010 client = i2c_new_device(tuner_i2c, &info);
1011
1012 if (client == NULL || client->dev.driver == NULL) {
1013 module_put(dvb->i2c_client_demod->dev.driver->owner);
1014 i2c_unregister_device(dvb->i2c_client_demod);
1015 result = -ENODEV;
1016 goto out_free;
1017 }
1018
1019 if (!try_module_get(client->dev.driver->owner)) {
1020 i2c_unregister_device(client);
1021 module_put(dvb->i2c_client_demod->dev.driver->owner);
1022 i2c_unregister_device(dvb->i2c_client_demod);
1023 result = -ENODEV;
1024 goto out_free;
1025 }
1026
1027 dev->cx231xx_reset_analog_tuner = NULL;
1028 dev->dvb->i2c_client_tuner = client;
1029 break;
1030 }
1031 case CX231XX_BOARD_ASTROMETA_T2HYBRID:
1032 {
1033 struct i2c_client *client;
1034 struct i2c_board_info info = {};
1035 struct mn88473_config mn88473_config = {};
1036
1037
1038 mn88473_config.i2c_wr_max = 16;
1039 mn88473_config.xtal = 25000000;
1040 mn88473_config.fe = &dev->dvb->frontend;
1041
1042 strlcpy(info.type, "mn88473", sizeof(info.type));
1043 info.addr = dev->board.demod_addr;
1044 info.platform_data = &mn88473_config;
1045
1046 request_module(info.type);
1047 client = i2c_new_device(demod_i2c, &info);
1048
1049 if (client == NULL || client->dev.driver == NULL) {
1050 result = -ENODEV;
1051 goto out_free;
1052 }
1053
1054 if (!try_module_get(client->dev.driver->owner)) {
1055 i2c_unregister_device(client);
1056 result = -ENODEV;
1057 goto out_free;
1058 }
1059
1060 dvb->i2c_client_demod = client;
1061
1062
1063 dvb->frontend->callback = cx231xx_tuner_callback;
1064
1065
1066 dvb_attach(r820t_attach, dev->dvb->frontend,
1067 tuner_i2c,
1068 &astrometa_t2hybrid_r820t_config);
1069 break;
1070 }
1071 default:
1072 dev_err(dev->dev,
1073 "%s/2: The frontend of your DVB/ATSC card isn't supported yet\n",
1074 dev->name);
1075 break;
1076 }
1077 if (NULL == dvb->frontend) {
1078 dev_err(dev->dev,
1079 "%s/2: frontend initialization failed\n", dev->name);
1080 result = -EINVAL;
1081 goto out_free;
1082 }
1083
1084
1085 result = register_dvb(dvb, THIS_MODULE, dev, dev->dev);
1086
1087 if (result < 0)
1088 goto out_free;
1089
1090
1091 dev_info(dev->dev, "Successfully loaded cx231xx-dvb\n");
1092
1093ret:
1094 cx231xx_set_mode(dev, CX231XX_SUSPEND);
1095 mutex_unlock(&dev->lock);
1096 return result;
1097
1098out_free:
1099 kfree(dvb);
1100 dev->dvb = NULL;
1101 goto ret;
1102}
1103
1104static int dvb_fini(struct cx231xx *dev)
1105{
1106 if (!dev->board.has_dvb) {
1107
1108 return 0;
1109 }
1110
1111 if (dev->dvb) {
1112 unregister_dvb(dev->dvb);
1113 dev->dvb = NULL;
1114 }
1115
1116 return 0;
1117}
1118
1119static struct cx231xx_ops dvb_ops = {
1120 .id = CX231XX_DVB,
1121 .name = "Cx231xx dvb Extension",
1122 .init = dvb_init,
1123 .fini = dvb_fini,
1124};
1125
1126static int __init cx231xx_dvb_register(void)
1127{
1128 return cx231xx_register_extension(&dvb_ops);
1129}
1130
1131static void __exit cx231xx_dvb_unregister(void)
1132{
1133 cx231xx_unregister_extension(&dvb_ops);
1134}
1135
1136module_init(cx231xx_dvb_register);
1137module_exit(cx231xx_dvb_unregister);
1138
