linux/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sp.h
<<
>>
Prefs
   1/* bnx2x_sp.h: Qlogic Everest network driver.
   2 *
   3 * Copyright 2011-2013 Broadcom Corporation
   4 * Copyright (c) 2014 QLogic Corporation
   5 * All rights reserved
   6 *
   7 * Unless you and Qlogic execute a separate written software license
   8 * agreement governing use of this software, this software is licensed to you
   9 * under the terms of the GNU General Public License version 2, available
  10 * at http://www.gnu.org/licenses/gpl-2.0.html (the "GPL").
  11 *
  12 * Notwithstanding the above, under no circumstances may you combine this
  13 * software in any way with any other Qlogic software provided under a
  14 * license other than the GPL, without Qlogic's express prior written
  15 * consent.
  16 *
  17 * Maintained by: Ariel Elior <ariel.elior@qlogic.com>
  18 * Written by: Vladislav Zolotarov
  19 *
  20 */
  21#ifndef BNX2X_SP_VERBS
  22#define BNX2X_SP_VERBS
  23
  24struct bnx2x;
  25struct eth_context;
  26
  27/* Bits representing general command's configuration */
  28enum {
  29        RAMROD_TX,
  30        RAMROD_RX,
  31        /* Wait until all pending commands complete */
  32        RAMROD_COMP_WAIT,
  33        /* Don't send a ramrod, only update a registry */
  34        RAMROD_DRV_CLR_ONLY,
  35        /* Configure HW according to the current object state */
  36        RAMROD_RESTORE,
  37         /* Execute the next command now */
  38        RAMROD_EXEC,
  39        /* Don't add a new command and continue execution of postponed
  40         * commands. If not set a new command will be added to the
  41         * pending commands list.
  42         */
  43        RAMROD_CONT,
  44        /* If there is another pending ramrod, wait until it finishes and
  45         * re-try to submit this one. This flag can be set only in sleepable
  46         * context, and should not be set from the context that completes the
  47         * ramrods as deadlock will occur.
  48         */
  49        RAMROD_RETRY,
  50};
  51
  52typedef enum {
  53        BNX2X_OBJ_TYPE_RX,
  54        BNX2X_OBJ_TYPE_TX,
  55        BNX2X_OBJ_TYPE_RX_TX,
  56} bnx2x_obj_type;
  57
  58/* Public slow path states */
  59enum {
  60        BNX2X_FILTER_MAC_PENDING,
  61        BNX2X_FILTER_VLAN_PENDING,
  62        BNX2X_FILTER_VLAN_MAC_PENDING,
  63        BNX2X_FILTER_RX_MODE_PENDING,
  64        BNX2X_FILTER_RX_MODE_SCHED,
  65        BNX2X_FILTER_ISCSI_ETH_START_SCHED,
  66        BNX2X_FILTER_ISCSI_ETH_STOP_SCHED,
  67        BNX2X_FILTER_FCOE_ETH_START_SCHED,
  68        BNX2X_FILTER_FCOE_ETH_STOP_SCHED,
  69        BNX2X_FILTER_MCAST_PENDING,
  70        BNX2X_FILTER_MCAST_SCHED,
  71        BNX2X_FILTER_RSS_CONF_PENDING,
  72        BNX2X_AFEX_FCOE_Q_UPDATE_PENDING,
  73        BNX2X_AFEX_PENDING_VIFSET_MCP_ACK
  74};
  75
  76struct bnx2x_raw_obj {
  77        u8              func_id;
  78
  79        /* Queue params */
  80        u8              cl_id;
  81        u32             cid;
  82
  83        /* Ramrod data buffer params */
  84        void            *rdata;
  85        dma_addr_t      rdata_mapping;
  86
  87        /* Ramrod state params */
  88        int             state;   /* "ramrod is pending" state bit */
  89        unsigned long   *pstate; /* pointer to state buffer */
  90
  91        bnx2x_obj_type  obj_type;
  92
  93        int (*wait_comp)(struct bnx2x *bp,
  94                         struct bnx2x_raw_obj *o);
  95
  96        bool (*check_pending)(struct bnx2x_raw_obj *o);
  97        void (*clear_pending)(struct bnx2x_raw_obj *o);
  98        void (*set_pending)(struct bnx2x_raw_obj *o);
  99};
 100
 101/************************* VLAN-MAC commands related parameters ***************/
 102struct bnx2x_mac_ramrod_data {
 103        u8 mac[ETH_ALEN];
 104        u8 is_inner_mac;
 105};
 106
 107struct bnx2x_vlan_ramrod_data {
 108        u16 vlan;
 109};
 110
 111struct bnx2x_vlan_mac_ramrod_data {
 112        u8 mac[ETH_ALEN];
 113        u8 is_inner_mac;
 114        u16 vlan;
 115};
 116
 117union bnx2x_classification_ramrod_data {
 118        struct bnx2x_mac_ramrod_data mac;
 119        struct bnx2x_vlan_ramrod_data vlan;
 120        struct bnx2x_vlan_mac_ramrod_data vlan_mac;
 121};
 122
 123/* VLAN_MAC commands */
 124enum bnx2x_vlan_mac_cmd {
 125        BNX2X_VLAN_MAC_ADD,
 126        BNX2X_VLAN_MAC_DEL,
 127        BNX2X_VLAN_MAC_MOVE,
 128};
 129
 130struct bnx2x_vlan_mac_data {
 131        /* Requested command: BNX2X_VLAN_MAC_XX */
 132        enum bnx2x_vlan_mac_cmd cmd;
 133        /* used to contain the data related vlan_mac_flags bits from
 134         * ramrod parameters.
 135         */
 136        unsigned long vlan_mac_flags;
 137
 138        /* Needed for MOVE command */
 139        struct bnx2x_vlan_mac_obj *target_obj;
 140
 141        union bnx2x_classification_ramrod_data u;
 142};
 143
 144/*************************** Exe Queue obj ************************************/
 145union bnx2x_exe_queue_cmd_data {
 146        struct bnx2x_vlan_mac_data vlan_mac;
 147
 148        struct {
 149                /* TODO */
 150        } mcast;
 151};
 152
 153struct bnx2x_exeq_elem {
 154        struct list_head                link;
 155
 156        /* Length of this element in the exe_chunk. */
 157        int                             cmd_len;
 158
 159        union bnx2x_exe_queue_cmd_data  cmd_data;
 160};
 161
 162union bnx2x_qable_obj;
 163
 164union bnx2x_exeq_comp_elem {
 165        union event_ring_elem *elem;
 166};
 167
 168struct bnx2x_exe_queue_obj;
 169
 170typedef int (*exe_q_validate)(struct bnx2x *bp,
 171                              union bnx2x_qable_obj *o,
 172                              struct bnx2x_exeq_elem *elem);
 173
 174typedef int (*exe_q_remove)(struct bnx2x *bp,
 175                            union bnx2x_qable_obj *o,
 176                            struct bnx2x_exeq_elem *elem);
 177
 178/* Return positive if entry was optimized, 0 - if not, negative
 179 * in case of an error.
 180 */
 181typedef int (*exe_q_optimize)(struct bnx2x *bp,
 182                              union bnx2x_qable_obj *o,
 183                              struct bnx2x_exeq_elem *elem);
 184typedef int (*exe_q_execute)(struct bnx2x *bp,
 185                             union bnx2x_qable_obj *o,
 186                             struct list_head *exe_chunk,
 187                             unsigned long *ramrod_flags);
 188typedef struct bnx2x_exeq_elem *
 189                        (*exe_q_get)(struct bnx2x_exe_queue_obj *o,
 190                                     struct bnx2x_exeq_elem *elem);
 191
 192struct bnx2x_exe_queue_obj {
 193        /* Commands pending for an execution. */
 194        struct list_head        exe_queue;
 195
 196        /* Commands pending for an completion. */
 197        struct list_head        pending_comp;
 198
 199        spinlock_t              lock;
 200
 201        /* Maximum length of commands' list for one execution */
 202        int                     exe_chunk_len;
 203
 204        union bnx2x_qable_obj   *owner;
 205
 206        /****** Virtual functions ******/
 207        /**
 208         * Called before commands execution for commands that are really
 209         * going to be executed (after 'optimize').
 210         *
 211         * Must run under exe_queue->lock
 212         */
 213        exe_q_validate          validate;
 214
 215        /**
 216         * Called before removing pending commands, cleaning allocated
 217         * resources (e.g., credits from validate)
 218         */
 219         exe_q_remove           remove;
 220
 221        /**
 222         * This will try to cancel the current pending commands list
 223         * considering the new command.
 224         *
 225         * Returns the number of optimized commands or a negative error code
 226         *
 227         * Must run under exe_queue->lock
 228         */
 229        exe_q_optimize          optimize;
 230
 231        /**
 232         * Run the next commands chunk (owner specific).
 233         */
 234        exe_q_execute           execute;
 235
 236        /**
 237         * Return the exe_queue element containing the specific command
 238         * if any. Otherwise return NULL.
 239         */
 240        exe_q_get               get;
 241};
 242/***************** Classification verbs: Set/Del MAC/VLAN/VLAN-MAC ************/
 243/*
 244 * Element in the VLAN_MAC registry list having all currently configured
 245 * rules.
 246 */
 247struct bnx2x_vlan_mac_registry_elem {
 248        struct list_head        link;
 249
 250        /* Used to store the cam offset used for the mac/vlan/vlan-mac.
 251         * Relevant for 57710 and 57711 only. VLANs and MACs share the
 252         * same CAM for these chips.
 253         */
 254        int                     cam_offset;
 255
 256        /* Needed for DEL and RESTORE flows */
 257        unsigned long           vlan_mac_flags;
 258
 259        union bnx2x_classification_ramrod_data u;
 260};
 261
 262/* Bits representing VLAN_MAC commands specific flags */
 263enum {
 264        BNX2X_UC_LIST_MAC,
 265        BNX2X_ETH_MAC,
 266        BNX2X_ISCSI_ETH_MAC,
 267        BNX2X_NETQ_ETH_MAC,
 268        BNX2X_DONT_CONSUME_CAM_CREDIT,
 269        BNX2X_DONT_CONSUME_CAM_CREDIT_DEST,
 270};
 271/* When looking for matching filters, some flags are not interesting */
 272#define BNX2X_VLAN_MAC_CMP_MASK (1 << BNX2X_UC_LIST_MAC | \
 273                                 1 << BNX2X_ETH_MAC | \
 274                                 1 << BNX2X_ISCSI_ETH_MAC | \
 275                                 1 << BNX2X_NETQ_ETH_MAC)
 276#define BNX2X_VLAN_MAC_CMP_FLAGS(flags) \
 277        ((flags) & BNX2X_VLAN_MAC_CMP_MASK)
 278
 279struct bnx2x_vlan_mac_ramrod_params {
 280        /* Object to run the command from */
 281        struct bnx2x_vlan_mac_obj *vlan_mac_obj;
 282
 283        /* General command flags: COMP_WAIT, etc. */
 284        unsigned long ramrod_flags;
 285
 286        /* Command specific configuration request */
 287        struct bnx2x_vlan_mac_data user_req;
 288};
 289
 290struct bnx2x_vlan_mac_obj {
 291        struct bnx2x_raw_obj raw;
 292
 293        /* Bookkeeping list: will prevent the addition of already existing
 294         * entries.
 295         */
 296        struct list_head                head;
 297        /* Implement a simple reader/writer lock on the head list.
 298         * all these fields should only be accessed under the exe_queue lock
 299         */
 300        u8              head_reader; /* Num. of readers accessing head list */
 301        bool            head_exe_request; /* Pending execution request. */
 302        unsigned long   saved_ramrod_flags; /* Ramrods of pending execution */
 303
 304        /* TODO: Add it's initialization in the init functions */
 305        struct bnx2x_exe_queue_obj      exe_queue;
 306
 307        /* MACs credit pool */
 308        struct bnx2x_credit_pool_obj    *macs_pool;
 309
 310        /* VLANs credit pool */
 311        struct bnx2x_credit_pool_obj    *vlans_pool;
 312
 313        /* RAMROD command to be used */
 314        int                             ramrod_cmd;
 315
 316        /* copy first n elements onto preallocated buffer
 317         *
 318         * @param n number of elements to get
 319         * @param buf buffer preallocated by caller into which elements
 320         *            will be copied. Note elements are 4-byte aligned
 321         *            so buffer size must be able to accommodate the
 322         *            aligned elements.
 323         *
 324         * @return number of copied bytes
 325         */
 326        int (*get_n_elements)(struct bnx2x *bp,
 327                              struct bnx2x_vlan_mac_obj *o, int n, u8 *base,
 328                              u8 stride, u8 size);
 329
 330        /**
 331         * Checks if ADD-ramrod with the given params may be performed.
 332         *
 333         * @return zero if the element may be added
 334         */
 335
 336        int (*check_add)(struct bnx2x *bp,
 337                         struct bnx2x_vlan_mac_obj *o,
 338                         union bnx2x_classification_ramrod_data *data);
 339
 340        /**
 341         * Checks if DEL-ramrod with the given params may be performed.
 342         *
 343         * @return true if the element may be deleted
 344         */
 345        struct bnx2x_vlan_mac_registry_elem *
 346                (*check_del)(struct bnx2x *bp,
 347                             struct bnx2x_vlan_mac_obj *o,
 348                             union bnx2x_classification_ramrod_data *data);
 349
 350        /**
 351         * Checks if DEL-ramrod with the given params may be performed.
 352         *
 353         * @return true if the element may be deleted
 354         */
 355        bool (*check_move)(struct bnx2x *bp,
 356                           struct bnx2x_vlan_mac_obj *src_o,
 357                           struct bnx2x_vlan_mac_obj *dst_o,
 358                           union bnx2x_classification_ramrod_data *data);
 359
 360        /**
 361         *  Update the relevant credit object(s) (consume/return
 362         *  correspondingly).
 363         */
 364        bool (*get_credit)(struct bnx2x_vlan_mac_obj *o);
 365        bool (*put_credit)(struct bnx2x_vlan_mac_obj *o);
 366        bool (*get_cam_offset)(struct bnx2x_vlan_mac_obj *o, int *offset);
 367        bool (*put_cam_offset)(struct bnx2x_vlan_mac_obj *o, int offset);
 368
 369        /**
 370         * Configures one rule in the ramrod data buffer.
 371         */
 372        void (*set_one_rule)(struct bnx2x *bp,
 373                             struct bnx2x_vlan_mac_obj *o,
 374                             struct bnx2x_exeq_elem *elem, int rule_idx,
 375                             int cam_offset);
 376
 377        /**
 378        *  Delete all configured elements having the given
 379        *  vlan_mac_flags specification. Assumes no pending for
 380        *  execution commands. Will schedule all all currently
 381        *  configured MACs/VLANs/VLAN-MACs matching the vlan_mac_flags
 382        *  specification for deletion and will use the given
 383        *  ramrod_flags for the last DEL operation.
 384         *
 385         * @param bp
 386         * @param o
 387         * @param ramrod_flags RAMROD_XX flags
 388         *
 389         * @return 0 if the last operation has completed successfully
 390         *         and there are no more elements left, positive value
 391         *         if there are pending for completion commands,
 392         *         negative value in case of failure.
 393         */
 394        int (*delete_all)(struct bnx2x *bp,
 395                          struct bnx2x_vlan_mac_obj *o,
 396                          unsigned long *vlan_mac_flags,
 397                          unsigned long *ramrod_flags);
 398
 399        /**
 400         * Reconfigures the next MAC/VLAN/VLAN-MAC element from the previously
 401         * configured elements list.
 402         *
 403         * @param bp
 404         * @param p Command parameters (RAMROD_COMP_WAIT bit in
 405         *          ramrod_flags is only taken into an account)
 406         * @param ppos a pointer to the cookie that should be given back in the
 407         *        next call to make function handle the next element. If
 408         *        *ppos is set to NULL it will restart the iterator.
 409         *        If returned *ppos == NULL this means that the last
 410         *        element has been handled.
 411         *
 412         * @return int
 413         */
 414        int (*restore)(struct bnx2x *bp,
 415                       struct bnx2x_vlan_mac_ramrod_params *p,
 416                       struct bnx2x_vlan_mac_registry_elem **ppos);
 417
 418        /**
 419         * Should be called on a completion arrival.
 420         *
 421         * @param bp
 422         * @param o
 423         * @param cqe Completion element we are handling
 424         * @param ramrod_flags if RAMROD_CONT is set the next bulk of
 425         *                     pending commands will be executed.
 426         *                     RAMROD_DRV_CLR_ONLY and RAMROD_RESTORE
 427         *                     may also be set if needed.
 428         *
 429         * @return 0 if there are neither pending nor waiting for
 430         *         completion commands. Positive value if there are
 431         *         pending for execution or for completion commands.
 432         *         Negative value in case of an error (including an
 433         *         error in the cqe).
 434         */
 435        int (*complete)(struct bnx2x *bp, struct bnx2x_vlan_mac_obj *o,
 436                        union event_ring_elem *cqe,
 437                        unsigned long *ramrod_flags);
 438
 439        /**
 440         * Wait for completion of all commands. Don't schedule new ones,
 441         * just wait. It assumes that the completion code will schedule
 442         * for new commands.
 443         */
 444        int (*wait)(struct bnx2x *bp, struct bnx2x_vlan_mac_obj *o);
 445};
 446
 447enum {
 448        BNX2X_LLH_CAM_ISCSI_ETH_LINE = 0,
 449        BNX2X_LLH_CAM_ETH_LINE,
 450        BNX2X_LLH_CAM_MAX_PF_LINE = NIG_REG_LLH1_FUNC_MEM_SIZE / 2
 451};
 452
 453/** RX_MODE verbs:DROP_ALL/ACCEPT_ALL/ACCEPT_ALL_MULTI/ACCEPT_ALL_VLAN/NORMAL */
 454
 455/* RX_MODE ramrod special flags: set in rx_mode_flags field in
 456 * a bnx2x_rx_mode_ramrod_params.
 457 */
 458enum {
 459        BNX2X_RX_MODE_FCOE_ETH,
 460        BNX2X_RX_MODE_ISCSI_ETH,
 461};
 462
 463enum {
 464        BNX2X_ACCEPT_UNICAST,
 465        BNX2X_ACCEPT_MULTICAST,
 466        BNX2X_ACCEPT_ALL_UNICAST,
 467        BNX2X_ACCEPT_ALL_MULTICAST,
 468        BNX2X_ACCEPT_BROADCAST,
 469        BNX2X_ACCEPT_UNMATCHED,
 470        BNX2X_ACCEPT_ANY_VLAN
 471};
 472
 473struct bnx2x_rx_mode_ramrod_params {
 474        struct bnx2x_rx_mode_obj *rx_mode_obj;
 475        unsigned long *pstate;
 476        int state;
 477        u8 cl_id;
 478        u32 cid;
 479        u8 func_id;
 480        unsigned long ramrod_flags;
 481        unsigned long rx_mode_flags;
 482
 483        /* rdata is either a pointer to eth_filter_rules_ramrod_data(e2) or to
 484         * a tstorm_eth_mac_filter_config (e1x).
 485         */
 486        void *rdata;
 487        dma_addr_t rdata_mapping;
 488
 489        /* Rx mode settings */
 490        unsigned long rx_accept_flags;
 491
 492        /* internal switching settings */
 493        unsigned long tx_accept_flags;
 494};
 495
 496struct bnx2x_rx_mode_obj {
 497        int (*config_rx_mode)(struct bnx2x *bp,
 498                              struct bnx2x_rx_mode_ramrod_params *p);
 499
 500        int (*wait_comp)(struct bnx2x *bp,
 501                         struct bnx2x_rx_mode_ramrod_params *p);
 502};
 503
 504/********************** Set multicast group ***********************************/
 505
 506struct bnx2x_mcast_list_elem {
 507        struct list_head link;
 508        u8 *mac;
 509};
 510
 511union bnx2x_mcast_config_data {
 512        u8 *mac;
 513        u8 bin; /* used in a RESTORE flow */
 514};
 515
 516struct bnx2x_mcast_ramrod_params {
 517        struct bnx2x_mcast_obj *mcast_obj;
 518
 519        /* Relevant options are RAMROD_COMP_WAIT and RAMROD_DRV_CLR_ONLY */
 520        unsigned long ramrod_flags;
 521
 522        struct list_head mcast_list; /* list of struct bnx2x_mcast_list_elem */
 523        /** TODO:
 524         *      - rename it to macs_num.
 525         *      - Add a new command type for handling pending commands
 526         *        (remove "zero semantics").
 527         *
 528         *  Length of mcast_list. If zero and ADD_CONT command - post
 529         *  pending commands.
 530         */
 531        int mcast_list_len;
 532};
 533
 534enum bnx2x_mcast_cmd {
 535        BNX2X_MCAST_CMD_ADD,
 536        BNX2X_MCAST_CMD_CONT,
 537        BNX2X_MCAST_CMD_DEL,
 538        BNX2X_MCAST_CMD_RESTORE,
 539
 540        /* Following this, multicast configuration should equal to approx
 541         * the set of MACs provided [i.e., remove all else].
 542         * The two sub-commands are used internally to decide whether a given
 543         * bin is to be added or removed
 544         */
 545        BNX2X_MCAST_CMD_SET,
 546        BNX2X_MCAST_CMD_SET_ADD,
 547        BNX2X_MCAST_CMD_SET_DEL,
 548};
 549
 550struct bnx2x_mcast_obj {
 551        struct bnx2x_raw_obj raw;
 552
 553        union {
 554                struct {
 555                #define BNX2X_MCAST_BINS_NUM    256
 556                #define BNX2X_MCAST_VEC_SZ      (BNX2X_MCAST_BINS_NUM / 64)
 557                        u64 vec[BNX2X_MCAST_VEC_SZ];
 558
 559                        /** Number of BINs to clear. Should be updated
 560                         *  immediately when a command arrives in order to
 561                         *  properly create DEL commands.
 562                         */
 563                        int num_bins_set;
 564                } aprox_match;
 565
 566                struct {
 567                        struct list_head macs;
 568                        int num_macs_set;
 569                } exact_match;
 570        } registry;
 571
 572        /* Pending commands */
 573        struct list_head pending_cmds_head;
 574
 575        /* A state that is set in raw.pstate, when there are pending commands */
 576        int sched_state;
 577
 578        /* Maximal number of mcast MACs configured in one command */
 579        int max_cmd_len;
 580
 581        /* Total number of currently pending MACs to configure: both
 582         * in the pending commands list and in the current command.
 583         */
 584        int total_pending_num;
 585
 586        u8 engine_id;
 587
 588        /**
 589         * @param cmd command to execute (BNX2X_MCAST_CMD_X, see above)
 590         */
 591        int (*config_mcast)(struct bnx2x *bp,
 592                            struct bnx2x_mcast_ramrod_params *p,
 593                            enum bnx2x_mcast_cmd cmd);
 594
 595        /**
 596         * Fills the ramrod data during the RESTORE flow.
 597         *
 598         * @param bp
 599         * @param o
 600         * @param start_idx Registry index to start from
 601         * @param rdata_idx Index in the ramrod data to start from
 602         *
 603         * @return -1 if we handled the whole registry or index of the last
 604         *         handled registry element.
 605         */
 606        int (*hdl_restore)(struct bnx2x *bp, struct bnx2x_mcast_obj *o,
 607                           int start_bin, int *rdata_idx);
 608
 609        int (*enqueue_cmd)(struct bnx2x *bp, struct bnx2x_mcast_obj *o,
 610                           struct bnx2x_mcast_ramrod_params *p,
 611                           enum bnx2x_mcast_cmd cmd);
 612
 613        void (*set_one_rule)(struct bnx2x *bp,
 614                             struct bnx2x_mcast_obj *o, int idx,
 615                             union bnx2x_mcast_config_data *cfg_data,
 616                             enum bnx2x_mcast_cmd cmd);
 617
 618        /** Checks if there are more mcast MACs to be set or a previous
 619         *  command is still pending.
 620         */
 621        bool (*check_pending)(struct bnx2x_mcast_obj *o);
 622
 623        /**
 624         * Set/Clear/Check SCHEDULED state of the object
 625         */
 626        void (*set_sched)(struct bnx2x_mcast_obj *o);
 627        void (*clear_sched)(struct bnx2x_mcast_obj *o);
 628        bool (*check_sched)(struct bnx2x_mcast_obj *o);
 629
 630        /* Wait until all pending commands complete */
 631        int (*wait_comp)(struct bnx2x *bp, struct bnx2x_mcast_obj *o);
 632
 633        /**
 634         * Handle the internal object counters needed for proper
 635         * commands handling. Checks that the provided parameters are
 636         * feasible.
 637         */
 638        int (*validate)(struct bnx2x *bp,
 639                        struct bnx2x_mcast_ramrod_params *p,
 640                        enum bnx2x_mcast_cmd cmd);
 641
 642        /**
 643         * Restore the values of internal counters in case of a failure.
 644         */
 645        void (*revert)(struct bnx2x *bp,
 646                       struct bnx2x_mcast_ramrod_params *p,
 647                       int old_num_bins,
 648                       enum bnx2x_mcast_cmd cmd);
 649
 650        int (*get_registry_size)(struct bnx2x_mcast_obj *o);
 651        void (*set_registry_size)(struct bnx2x_mcast_obj *o, int n);
 652};
 653
 654/*************************** Credit handling **********************************/
 655struct bnx2x_credit_pool_obj {
 656
 657        /* Current amount of credit in the pool */
 658        atomic_t        credit;
 659
 660        /* Maximum allowed credit. put() will check against it. */
 661        int             pool_sz;
 662
 663        /* Allocate a pool table statically.
 664         *
 665         * Currently the maximum allowed size is MAX_MAC_CREDIT_E2(272)
 666         *
 667         * The set bit in the table will mean that the entry is available.
 668         */
 669#define BNX2X_POOL_VEC_SIZE     (MAX_MAC_CREDIT_E2 / 64)
 670        u64             pool_mirror[BNX2X_POOL_VEC_SIZE];
 671
 672        /* Base pool offset (initialized differently */
 673        int             base_pool_offset;
 674
 675        /**
 676         * Get the next free pool entry.
 677         *
 678         * @return true if there was a free entry in the pool
 679         */
 680        bool (*get_entry)(struct bnx2x_credit_pool_obj *o, int *entry);
 681
 682        /**
 683         * Return the entry back to the pool.
 684         *
 685         * @return true if entry is legal and has been successfully
 686         *         returned to the pool.
 687         */
 688        bool (*put_entry)(struct bnx2x_credit_pool_obj *o, int entry);
 689
 690        /**
 691         * Get the requested amount of credit from the pool.
 692         *
 693         * @param cnt Amount of requested credit
 694         * @return true if the operation is successful
 695         */
 696        bool (*get)(struct bnx2x_credit_pool_obj *o, int cnt);
 697
 698        /**
 699         * Returns the credit to the pool.
 700         *
 701         * @param cnt Amount of credit to return
 702         * @return true if the operation is successful
 703         */
 704        bool (*put)(struct bnx2x_credit_pool_obj *o, int cnt);
 705
 706        /**
 707         * Reads the current amount of credit.
 708         */
 709        int (*check)(struct bnx2x_credit_pool_obj *o);
 710};
 711
 712/*************************** RSS configuration ********************************/
 713enum {
 714        /* RSS_MODE bits are mutually exclusive */
 715        BNX2X_RSS_MODE_DISABLED,
 716        BNX2X_RSS_MODE_REGULAR,
 717
 718        BNX2X_RSS_SET_SRCH, /* Setup searcher, E1x specific flag */
 719
 720        BNX2X_RSS_IPV4,
 721        BNX2X_RSS_IPV4_TCP,
 722        BNX2X_RSS_IPV4_UDP,
 723        BNX2X_RSS_IPV6,
 724        BNX2X_RSS_IPV6_TCP,
 725        BNX2X_RSS_IPV6_UDP,
 726
 727        BNX2X_RSS_IPV4_VXLAN,
 728        BNX2X_RSS_IPV6_VXLAN,
 729        BNX2X_RSS_TUNN_INNER_HDRS,
 730};
 731
 732struct bnx2x_config_rss_params {
 733        struct bnx2x_rss_config_obj *rss_obj;
 734
 735        /* may have RAMROD_COMP_WAIT set only */
 736        unsigned long   ramrod_flags;
 737
 738        /* BNX2X_RSS_X bits */
 739        unsigned long   rss_flags;
 740
 741        /* Number hash bits to take into an account */
 742        u8              rss_result_mask;
 743
 744        /* Indirection table */
 745        u8              ind_table[T_ETH_INDIRECTION_TABLE_SIZE];
 746
 747        /* RSS hash values */
 748        u32             rss_key[10];
 749
 750        /* valid only iff BNX2X_RSS_UPDATE_TOE is set */
 751        u16             toe_rss_bitmap;
 752};
 753
 754struct bnx2x_rss_config_obj {
 755        struct bnx2x_raw_obj    raw;
 756
 757        /* RSS engine to use */
 758        u8                      engine_id;
 759
 760        /* Last configured indirection table */
 761        u8                      ind_table[T_ETH_INDIRECTION_TABLE_SIZE];
 762
 763        /* flags for enabling 4-tupple hash on UDP */
 764        u8                      udp_rss_v4;
 765        u8                      udp_rss_v6;
 766
 767        int (*config_rss)(struct bnx2x *bp,
 768                          struct bnx2x_config_rss_params *p);
 769};
 770
 771/*********************** Queue state update ***********************************/
 772
 773/* UPDATE command options */
 774enum {
 775        BNX2X_Q_UPDATE_IN_VLAN_REM,
 776        BNX2X_Q_UPDATE_IN_VLAN_REM_CHNG,
 777        BNX2X_Q_UPDATE_OUT_VLAN_REM,
 778        BNX2X_Q_UPDATE_OUT_VLAN_REM_CHNG,
 779        BNX2X_Q_UPDATE_ANTI_SPOOF,
 780        BNX2X_Q_UPDATE_ANTI_SPOOF_CHNG,
 781        BNX2X_Q_UPDATE_ACTIVATE,
 782        BNX2X_Q_UPDATE_ACTIVATE_CHNG,
 783        BNX2X_Q_UPDATE_DEF_VLAN_EN,
 784        BNX2X_Q_UPDATE_DEF_VLAN_EN_CHNG,
 785        BNX2X_Q_UPDATE_SILENT_VLAN_REM_CHNG,
 786        BNX2X_Q_UPDATE_SILENT_VLAN_REM,
 787        BNX2X_Q_UPDATE_TX_SWITCHING_CHNG,
 788        BNX2X_Q_UPDATE_TX_SWITCHING,
 789        BNX2X_Q_UPDATE_PTP_PKTS_CHNG,
 790        BNX2X_Q_UPDATE_PTP_PKTS,
 791};
 792
 793/* Allowed Queue states */
 794enum bnx2x_q_state {
 795        BNX2X_Q_STATE_RESET,
 796        BNX2X_Q_STATE_INITIALIZED,
 797        BNX2X_Q_STATE_ACTIVE,
 798        BNX2X_Q_STATE_MULTI_COS,
 799        BNX2X_Q_STATE_MCOS_TERMINATED,
 800        BNX2X_Q_STATE_INACTIVE,
 801        BNX2X_Q_STATE_STOPPED,
 802        BNX2X_Q_STATE_TERMINATED,
 803        BNX2X_Q_STATE_FLRED,
 804        BNX2X_Q_STATE_MAX,
 805};
 806
 807/* Allowed Queue states */
 808enum bnx2x_q_logical_state {
 809        BNX2X_Q_LOGICAL_STATE_ACTIVE,
 810        BNX2X_Q_LOGICAL_STATE_STOPPED,
 811};
 812
 813/* Allowed commands */
 814enum bnx2x_queue_cmd {
 815        BNX2X_Q_CMD_INIT,
 816        BNX2X_Q_CMD_SETUP,
 817        BNX2X_Q_CMD_SETUP_TX_ONLY,
 818        BNX2X_Q_CMD_DEACTIVATE,
 819        BNX2X_Q_CMD_ACTIVATE,
 820        BNX2X_Q_CMD_UPDATE,
 821        BNX2X_Q_CMD_UPDATE_TPA,
 822        BNX2X_Q_CMD_HALT,
 823        BNX2X_Q_CMD_CFC_DEL,
 824        BNX2X_Q_CMD_TERMINATE,
 825        BNX2X_Q_CMD_EMPTY,
 826        BNX2X_Q_CMD_MAX,
 827};
 828
 829/* queue SETUP + INIT flags */
 830enum {
 831        BNX2X_Q_FLG_TPA,
 832        BNX2X_Q_FLG_TPA_IPV6,
 833        BNX2X_Q_FLG_TPA_GRO,
 834        BNX2X_Q_FLG_STATS,
 835        BNX2X_Q_FLG_ZERO_STATS,
 836        BNX2X_Q_FLG_ACTIVE,
 837        BNX2X_Q_FLG_OV,
 838        BNX2X_Q_FLG_VLAN,
 839        BNX2X_Q_FLG_COS,
 840        BNX2X_Q_FLG_HC,
 841        BNX2X_Q_FLG_HC_EN,
 842        BNX2X_Q_FLG_DHC,
 843        BNX2X_Q_FLG_FCOE,
 844        BNX2X_Q_FLG_LEADING_RSS,
 845        BNX2X_Q_FLG_MCAST,
 846        BNX2X_Q_FLG_DEF_VLAN,
 847        BNX2X_Q_FLG_TX_SWITCH,
 848        BNX2X_Q_FLG_TX_SEC,
 849        BNX2X_Q_FLG_ANTI_SPOOF,
 850        BNX2X_Q_FLG_SILENT_VLAN_REM,
 851        BNX2X_Q_FLG_FORCE_DEFAULT_PRI,
 852        BNX2X_Q_FLG_REFUSE_OUTBAND_VLAN,
 853        BNX2X_Q_FLG_PCSUM_ON_PKT,
 854        BNX2X_Q_FLG_TUN_INC_INNER_IP_ID
 855};
 856
 857/* Queue type options: queue type may be a combination of below. */
 858enum bnx2x_q_type {
 859        /** TODO: Consider moving both these flags into the init()
 860         *        ramrod params.
 861         */
 862        BNX2X_Q_TYPE_HAS_RX,
 863        BNX2X_Q_TYPE_HAS_TX,
 864};
 865
 866#define BNX2X_PRIMARY_CID_INDEX                 0
 867#define BNX2X_MULTI_TX_COS_E1X                  3 /* QM only */
 868#define BNX2X_MULTI_TX_COS_E2_E3A0              2
 869#define BNX2X_MULTI_TX_COS_E3B0                 3
 870#define BNX2X_MULTI_TX_COS                      3 /* Maximum possible */
 871
 872#define MAC_PAD (ALIGN(ETH_ALEN, sizeof(u32)) - ETH_ALEN)
 873/* DMAE channel to be used by FW for timesync workaroun. A driver that sends
 874 * timesync-related ramrods must not use this DMAE command ID.
 875 */
 876#define FW_DMAE_CMD_ID 6
 877
 878struct bnx2x_queue_init_params {
 879        struct {
 880                unsigned long   flags;
 881                u16             hc_rate;
 882                u8              fw_sb_id;
 883                u8              sb_cq_index;
 884        } tx;
 885
 886        struct {
 887                unsigned long   flags;
 888                u16             hc_rate;
 889                u8              fw_sb_id;
 890                u8              sb_cq_index;
 891        } rx;
 892
 893        /* CID context in the host memory */
 894        struct eth_context *cxts[BNX2X_MULTI_TX_COS];
 895
 896        /* maximum number of cos supported by hardware */
 897        u8 max_cos;
 898};
 899
 900struct bnx2x_queue_terminate_params {
 901        /* index within the tx_only cids of this queue object */
 902        u8 cid_index;
 903};
 904
 905struct bnx2x_queue_cfc_del_params {
 906        /* index within the tx_only cids of this queue object */
 907        u8 cid_index;
 908};
 909
 910struct bnx2x_queue_update_params {
 911        unsigned long   update_flags; /* BNX2X_Q_UPDATE_XX bits */
 912        u16             def_vlan;
 913        u16             silent_removal_value;
 914        u16             silent_removal_mask;
 915/* index within the tx_only cids of this queue object */
 916        u8              cid_index;
 917};
 918
 919struct bnx2x_queue_update_tpa_params {
 920        dma_addr_t sge_map;
 921        u8 update_ipv4;
 922        u8 update_ipv6;
 923        u8 max_tpa_queues;
 924        u8 max_sges_pkt;
 925        u8 complete_on_both_clients;
 926        u8 dont_verify_thr;
 927        u8 tpa_mode;
 928        u8 _pad;
 929
 930        u16 sge_buff_sz;
 931        u16 max_agg_sz;
 932
 933        u16 sge_pause_thr_low;
 934        u16 sge_pause_thr_high;
 935};
 936
 937struct rxq_pause_params {
 938        u16             bd_th_lo;
 939        u16             bd_th_hi;
 940        u16             rcq_th_lo;
 941        u16             rcq_th_hi;
 942        u16             sge_th_lo; /* valid iff BNX2X_Q_FLG_TPA */
 943        u16             sge_th_hi; /* valid iff BNX2X_Q_FLG_TPA */
 944        u16             pri_map;
 945};
 946
 947/* general */
 948struct bnx2x_general_setup_params {
 949        /* valid iff BNX2X_Q_FLG_STATS */
 950        u8              stat_id;
 951
 952        u8              spcl_id;
 953        u16             mtu;
 954        u8              cos;
 955
 956        u8              fp_hsi;
 957};
 958
 959struct bnx2x_rxq_setup_params {
 960        /* dma */
 961        dma_addr_t      dscr_map;
 962        dma_addr_t      sge_map;
 963        dma_addr_t      rcq_map;
 964        dma_addr_t      rcq_np_map;
 965
 966        u16             drop_flags;
 967        u16             buf_sz;
 968        u8              fw_sb_id;
 969        u8              cl_qzone_id;
 970
 971        /* valid iff BNX2X_Q_FLG_TPA */
 972        u16             tpa_agg_sz;
 973        u16             sge_buf_sz;
 974        u8              max_sges_pkt;
 975        u8              max_tpa_queues;
 976        u8              rss_engine_id;
 977
 978        /* valid iff BNX2X_Q_FLG_MCAST */
 979        u8              mcast_engine_id;
 980
 981        u8              cache_line_log;
 982
 983        u8              sb_cq_index;
 984
 985        /* valid iff BXN2X_Q_FLG_SILENT_VLAN_REM */
 986        u16 silent_removal_value;
 987        u16 silent_removal_mask;
 988};
 989
 990struct bnx2x_txq_setup_params {
 991        /* dma */
 992        dma_addr_t      dscr_map;
 993
 994        u8              fw_sb_id;
 995        u8              sb_cq_index;
 996        u8              cos;            /* valid iff BNX2X_Q_FLG_COS */
 997        u16             traffic_type;
 998        /* equals to the leading rss client id, used for TX classification*/
 999        u8              tss_leading_cl_id;
1000
1001        /* valid iff BNX2X_Q_FLG_DEF_VLAN */
1002        u16             default_vlan;
1003};
1004
1005struct bnx2x_queue_setup_params {
1006        struct bnx2x_general_setup_params gen_params;
1007        struct bnx2x_txq_setup_params txq_params;
1008        struct bnx2x_rxq_setup_params rxq_params;
1009        struct rxq_pause_params pause_params;
1010        unsigned long flags;
1011};
1012
1013struct bnx2x_queue_setup_tx_only_params {
1014        struct bnx2x_general_setup_params       gen_params;
1015        struct bnx2x_txq_setup_params           txq_params;
1016        unsigned long                           flags;
1017        /* index within the tx_only cids of this queue object */
1018        u8                                      cid_index;
1019};
1020
1021struct bnx2x_queue_state_params {
1022        struct bnx2x_queue_sp_obj *q_obj;
1023
1024        /* Current command */
1025        enum bnx2x_queue_cmd cmd;
1026
1027        /* may have RAMROD_COMP_WAIT set only */
1028        unsigned long ramrod_flags;
1029
1030        /* Params according to the current command */
1031        union {
1032                struct bnx2x_queue_update_params        update;
1033                struct bnx2x_queue_update_tpa_params    update_tpa;
1034                struct bnx2x_queue_setup_params         setup;
1035                struct bnx2x_queue_init_params          init;
1036                struct bnx2x_queue_setup_tx_only_params tx_only;
1037                struct bnx2x_queue_terminate_params     terminate;
1038                struct bnx2x_queue_cfc_del_params       cfc_del;
1039        } params;
1040};
1041
1042struct bnx2x_viflist_params {
1043        u8 echo_res;
1044        u8 func_bit_map_res;
1045};
1046
1047struct bnx2x_queue_sp_obj {
1048        u32             cids[BNX2X_MULTI_TX_COS];
1049        u8              cl_id;
1050        u8              func_id;
1051
1052        /* number of traffic classes supported by queue.
1053         * The primary connection of the queue supports the first traffic
1054         * class. Any further traffic class is supported by a tx-only
1055         * connection.
1056         *
1057         * Therefore max_cos is also a number of valid entries in the cids
1058         * array.
1059         */
1060        u8 max_cos;
1061        u8 num_tx_only, next_tx_only;
1062
1063        enum bnx2x_q_state state, next_state;
1064
1065        /* bits from enum bnx2x_q_type */
1066        unsigned long   type;
1067
1068        /* BNX2X_Q_CMD_XX bits. This object implements "one
1069         * pending" paradigm but for debug and tracing purposes it's
1070         * more convenient to have different bits for different
1071         * commands.
1072         */
1073        unsigned long   pending;
1074
1075        /* Buffer to use as a ramrod data and its mapping */
1076        void            *rdata;
1077        dma_addr_t      rdata_mapping;
1078
1079        /**
1080         * Performs one state change according to the given parameters.
1081         *
1082         * @return 0 in case of success and negative value otherwise.
1083         */
1084        int (*send_cmd)(struct bnx2x *bp,
1085                        struct bnx2x_queue_state_params *params);
1086
1087        /**
1088         * Sets the pending bit according to the requested transition.
1089         */
1090        int (*set_pending)(struct bnx2x_queue_sp_obj *o,
1091                           struct bnx2x_queue_state_params *params);
1092
1093        /**
1094         * Checks that the requested state transition is legal.
1095         */
1096        int (*check_transition)(struct bnx2x *bp,
1097                                struct bnx2x_queue_sp_obj *o,
1098                                struct bnx2x_queue_state_params *params);
1099
1100        /**
1101         * Completes the pending command.
1102         */
1103        int (*complete_cmd)(struct bnx2x *bp,
1104                            struct bnx2x_queue_sp_obj *o,
1105                            enum bnx2x_queue_cmd);
1106
1107        int (*wait_comp)(struct bnx2x *bp,
1108                         struct bnx2x_queue_sp_obj *o,
1109                         enum bnx2x_queue_cmd cmd);
1110};
1111
1112/********************** Function state update *********************************/
1113
1114/* UPDATE command options */
1115enum {
1116        BNX2X_F_UPDATE_TX_SWITCH_SUSPEND_CHNG,
1117        BNX2X_F_UPDATE_TX_SWITCH_SUSPEND,
1118        BNX2X_F_UPDATE_SD_VLAN_TAG_CHNG,
1119        BNX2X_F_UPDATE_SD_VLAN_ETH_TYPE_CHNG,
1120        BNX2X_F_UPDATE_VLAN_FORCE_PRIO_CHNG,
1121        BNX2X_F_UPDATE_VLAN_FORCE_PRIO_FLAG,
1122        BNX2X_F_UPDATE_TUNNEL_CFG_CHNG,
1123        BNX2X_F_UPDATE_TUNNEL_INNER_CLSS_L2GRE,
1124        BNX2X_F_UPDATE_TUNNEL_INNER_CLSS_VXLAN,
1125        BNX2X_F_UPDATE_TUNNEL_INNER_CLSS_L2GENEVE,
1126        BNX2X_F_UPDATE_TUNNEL_INNER_RSS,
1127};
1128
1129/* Allowed Function states */
1130enum bnx2x_func_state {
1131        BNX2X_F_STATE_RESET,
1132        BNX2X_F_STATE_INITIALIZED,
1133        BNX2X_F_STATE_STARTED,
1134        BNX2X_F_STATE_TX_STOPPED,
1135        BNX2X_F_STATE_MAX,
1136};
1137
1138/* Allowed Function commands */
1139enum bnx2x_func_cmd {
1140        BNX2X_F_CMD_HW_INIT,
1141        BNX2X_F_CMD_START,
1142        BNX2X_F_CMD_STOP,
1143        BNX2X_F_CMD_HW_RESET,
1144        BNX2X_F_CMD_AFEX_UPDATE,
1145        BNX2X_F_CMD_AFEX_VIFLISTS,
1146        BNX2X_F_CMD_TX_STOP,
1147        BNX2X_F_CMD_TX_START,
1148        BNX2X_F_CMD_SWITCH_UPDATE,
1149        BNX2X_F_CMD_SET_TIMESYNC,
1150        BNX2X_F_CMD_MAX,
1151};
1152
1153struct bnx2x_func_hw_init_params {
1154        /* A load phase returned by MCP.
1155         *
1156         * May be:
1157         *              FW_MSG_CODE_DRV_LOAD_COMMON_CHIP
1158         *              FW_MSG_CODE_DRV_LOAD_COMMON
1159         *              FW_MSG_CODE_DRV_LOAD_PORT
1160         *              FW_MSG_CODE_DRV_LOAD_FUNCTION
1161         */
1162        u32 load_phase;
1163};
1164
1165struct bnx2x_func_hw_reset_params {
1166        /* A load phase returned by MCP.
1167         *
1168         * May be:
1169         *              FW_MSG_CODE_DRV_LOAD_COMMON_CHIP
1170         *              FW_MSG_CODE_DRV_LOAD_COMMON
1171         *              FW_MSG_CODE_DRV_LOAD_PORT
1172         *              FW_MSG_CODE_DRV_LOAD_FUNCTION
1173         */
1174        u32 reset_phase;
1175};
1176
1177struct bnx2x_func_start_params {
1178        /* Multi Function mode:
1179         *      - Single Function
1180         *      - Switch Dependent
1181         *      - Switch Independent
1182         */
1183        u16 mf_mode;
1184
1185        /* Switch Dependent mode outer VLAN tag */
1186        u16 sd_vlan_tag;
1187
1188        /* Function cos mode */
1189        u8 network_cos_mode;
1190
1191        /* UDP dest port for VXLAN */
1192        u16 vxlan_dst_port;
1193
1194        /* UDP dest port for Geneve */
1195        u16 geneve_dst_port;
1196
1197        /* Enable inner Rx classifications for L2GRE packets */
1198        u8 inner_clss_l2gre;
1199
1200        /* Enable inner Rx classifications for L2-Geneve packets */
1201        u8 inner_clss_l2geneve;
1202
1203        /* Enable inner Rx classification for vxlan packets */
1204        u8 inner_clss_vxlan;
1205
1206        /* Enable RSS according to inner header */
1207        u8 inner_rss;
1208
1209        /* Allows accepting of packets failing MF classification, possibly
1210         * only matching a given ethertype
1211         */
1212        u8 class_fail;
1213        u16 class_fail_ethtype;
1214
1215        /* Override priority of output packets */
1216        u8 sd_vlan_force_pri;
1217        u8 sd_vlan_force_pri_val;
1218
1219        /* Replace vlan's ethertype */
1220        u16 sd_vlan_eth_type;
1221
1222        /* Prevent inner vlans from being added by FW */
1223        u8 no_added_tags;
1224
1225        /* Inner-to-Outer vlan priority mapping */
1226        u8 c2s_pri[MAX_VLAN_PRIORITIES];
1227        u8 c2s_pri_default;
1228        u8 c2s_pri_valid;
1229};
1230
1231struct bnx2x_func_switch_update_params {
1232        unsigned long changes; /* BNX2X_F_UPDATE_XX bits */
1233        u16 vlan;
1234        u16 vlan_eth_type;
1235        u8 vlan_force_prio;
1236        u16 vxlan_dst_port;
1237        u16 geneve_dst_port;
1238};
1239
1240struct bnx2x_func_afex_update_params {
1241        u16 vif_id;
1242        u16 afex_default_vlan;
1243        u8 allowed_priorities;
1244};
1245
1246struct bnx2x_func_afex_viflists_params {
1247        u16 vif_list_index;
1248        u8 func_bit_map;
1249        u8 afex_vif_list_command;
1250        u8 func_to_clear;
1251};
1252
1253struct bnx2x_func_tx_start_params {
1254        struct priority_cos traffic_type_to_priority_cos[MAX_TRAFFIC_TYPES];
1255        u8 dcb_enabled;
1256        u8 dcb_version;
1257        u8 dont_add_pri_0_en;
1258        u8 dcb_outer_pri[MAX_TRAFFIC_TYPES];
1259};
1260
1261struct bnx2x_func_set_timesync_params {
1262        /* Reset, set or keep the current drift value */
1263        u8 drift_adjust_cmd;
1264
1265        /* Dec, inc or keep the current offset */
1266        u8 offset_cmd;
1267
1268        /* Drift value direction */
1269        u8 add_sub_drift_adjust_value;
1270
1271        /* Drift, period and offset values to be used according to the commands
1272         * above.
1273         */
1274        u8 drift_adjust_value;
1275        u32 drift_adjust_period;
1276        u64 offset_delta;
1277};
1278
1279struct bnx2x_func_state_params {
1280        struct bnx2x_func_sp_obj *f_obj;
1281
1282        /* Current command */
1283        enum bnx2x_func_cmd cmd;
1284
1285        /* may have RAMROD_COMP_WAIT set only */
1286        unsigned long   ramrod_flags;
1287
1288        /* Params according to the current command */
1289        union {
1290                struct bnx2x_func_hw_init_params hw_init;
1291                struct bnx2x_func_hw_reset_params hw_reset;
1292                struct bnx2x_func_start_params start;
1293                struct bnx2x_func_switch_update_params switch_update;
1294                struct bnx2x_func_afex_update_params afex_update;
1295                struct bnx2x_func_afex_viflists_params afex_viflists;
1296                struct bnx2x_func_tx_start_params tx_start;
1297                struct bnx2x_func_set_timesync_params set_timesync;
1298        } params;
1299};
1300
1301struct bnx2x_func_sp_drv_ops {
1302        /* Init tool + runtime initialization:
1303         *      - Common Chip
1304         *      - Common (per Path)
1305         *      - Port
1306         *      - Function phases
1307         */
1308        int (*init_hw_cmn_chip)(struct bnx2x *bp);
1309        int (*init_hw_cmn)(struct bnx2x *bp);
1310        int (*init_hw_port)(struct bnx2x *bp);
1311        int (*init_hw_func)(struct bnx2x *bp);
1312
1313        /* Reset Function HW: Common, Port, Function phases. */
1314        void (*reset_hw_cmn)(struct bnx2x *bp);
1315        void (*reset_hw_port)(struct bnx2x *bp);
1316        void (*reset_hw_func)(struct bnx2x *bp);
1317
1318        /* Init/Free GUNZIP resources */
1319        int (*gunzip_init)(struct bnx2x *bp);
1320        void (*gunzip_end)(struct bnx2x *bp);
1321
1322        /* Prepare/Release FW resources */
1323        int (*init_fw)(struct bnx2x *bp);
1324        void (*release_fw)(struct bnx2x *bp);
1325};
1326
1327struct bnx2x_func_sp_obj {
1328        enum bnx2x_func_state   state, next_state;
1329
1330        /* BNX2X_FUNC_CMD_XX bits. This object implements "one
1331         * pending" paradigm but for debug and tracing purposes it's
1332         * more convenient to have different bits for different
1333         * commands.
1334         */
1335        unsigned long           pending;
1336
1337        /* Buffer to use as a ramrod data and its mapping */
1338        void                    *rdata;
1339        dma_addr_t              rdata_mapping;
1340
1341        /* Buffer to use as a afex ramrod data and its mapping.
1342         * This can't be same rdata as above because afex ramrod requests
1343         * can arrive to the object in parallel to other ramrod requests.
1344         */
1345        void                    *afex_rdata;
1346        dma_addr_t              afex_rdata_mapping;
1347
1348        /* this mutex validates that when pending flag is taken, the next
1349         * ramrod to be sent will be the one set the pending bit
1350         */
1351        struct mutex            one_pending_mutex;
1352
1353        /* Driver interface */
1354        struct bnx2x_func_sp_drv_ops    *drv;
1355
1356        /**
1357         * Performs one state change according to the given parameters.
1358         *
1359         * @return 0 in case of success and negative value otherwise.
1360         */
1361        int (*send_cmd)(struct bnx2x *bp,
1362                        struct bnx2x_func_state_params *params);
1363
1364        /**
1365         * Checks that the requested state transition is legal.
1366         */
1367        int (*check_transition)(struct bnx2x *bp,
1368                                struct bnx2x_func_sp_obj *o,
1369                                struct bnx2x_func_state_params *params);
1370
1371        /**
1372         * Completes the pending command.
1373         */
1374        int (*complete_cmd)(struct bnx2x *bp,
1375                            struct bnx2x_func_sp_obj *o,
1376                            enum bnx2x_func_cmd cmd);
1377
1378        int (*wait_comp)(struct bnx2x *bp, struct bnx2x_func_sp_obj *o,
1379                         enum bnx2x_func_cmd cmd);
1380};
1381
1382/********************** Interfaces ********************************************/
1383/* Queueable objects set */
1384union bnx2x_qable_obj {
1385        struct bnx2x_vlan_mac_obj vlan_mac;
1386};
1387/************** Function state update *********/
1388void bnx2x_init_func_obj(struct bnx2x *bp,
1389                         struct bnx2x_func_sp_obj *obj,
1390                         void *rdata, dma_addr_t rdata_mapping,
1391                         void *afex_rdata, dma_addr_t afex_rdata_mapping,
1392                         struct bnx2x_func_sp_drv_ops *drv_iface);
1393
1394int bnx2x_func_state_change(struct bnx2x *bp,
1395                            struct bnx2x_func_state_params *params);
1396
1397enum bnx2x_func_state bnx2x_func_get_state(struct bnx2x *bp,
1398                                           struct bnx2x_func_sp_obj *o);
1399/******************* Queue State **************/
1400void bnx2x_init_queue_obj(struct bnx2x *bp,
1401                          struct bnx2x_queue_sp_obj *obj, u8 cl_id, u32 *cids,
1402                          u8 cid_cnt, u8 func_id, void *rdata,
1403                          dma_addr_t rdata_mapping, unsigned long type);
1404
1405int bnx2x_queue_state_change(struct bnx2x *bp,
1406                             struct bnx2x_queue_state_params *params);
1407
1408int bnx2x_get_q_logical_state(struct bnx2x *bp,
1409                               struct bnx2x_queue_sp_obj *obj);
1410
1411/********************* VLAN-MAC ****************/
1412void bnx2x_init_mac_obj(struct bnx2x *bp,
1413                        struct bnx2x_vlan_mac_obj *mac_obj,
1414                        u8 cl_id, u32 cid, u8 func_id, void *rdata,
1415                        dma_addr_t rdata_mapping, int state,
1416                        unsigned long *pstate, bnx2x_obj_type type,
1417                        struct bnx2x_credit_pool_obj *macs_pool);
1418
1419void bnx2x_init_vlan_obj(struct bnx2x *bp,
1420                         struct bnx2x_vlan_mac_obj *vlan_obj,
1421                         u8 cl_id, u32 cid, u8 func_id, void *rdata,
1422                         dma_addr_t rdata_mapping, int state,
1423                         unsigned long *pstate, bnx2x_obj_type type,
1424                         struct bnx2x_credit_pool_obj *vlans_pool);
1425
1426void bnx2x_init_vlan_mac_obj(struct bnx2x *bp,
1427                             struct bnx2x_vlan_mac_obj *vlan_mac_obj,
1428                             u8 cl_id, u32 cid, u8 func_id, void *rdata,
1429                             dma_addr_t rdata_mapping, int state,
1430                             unsigned long *pstate, bnx2x_obj_type type,
1431                             struct bnx2x_credit_pool_obj *macs_pool,
1432                             struct bnx2x_credit_pool_obj *vlans_pool);
1433
1434int bnx2x_vlan_mac_h_read_lock(struct bnx2x *bp,
1435                                        struct bnx2x_vlan_mac_obj *o);
1436void bnx2x_vlan_mac_h_read_unlock(struct bnx2x *bp,
1437                                  struct bnx2x_vlan_mac_obj *o);
1438int bnx2x_vlan_mac_h_write_lock(struct bnx2x *bp,
1439                                struct bnx2x_vlan_mac_obj *o);
1440int bnx2x_config_vlan_mac(struct bnx2x *bp,
1441                           struct bnx2x_vlan_mac_ramrod_params *p);
1442
1443int bnx2x_vlan_mac_move(struct bnx2x *bp,
1444                        struct bnx2x_vlan_mac_ramrod_params *p,
1445                        struct bnx2x_vlan_mac_obj *dest_o);
1446
1447/********************* RX MODE ****************/
1448
1449void bnx2x_init_rx_mode_obj(struct bnx2x *bp,
1450                            struct bnx2x_rx_mode_obj *o);
1451
1452/**
1453 * bnx2x_config_rx_mode - Send and RX_MODE ramrod according to the provided parameters.
1454 *
1455 * @p: Command parameters
1456 *
1457 * Return: 0 - if operation was successful and there is no pending completions,
1458 *         positive number - if there are pending completions,
1459 *         negative - if there were errors
1460 */
1461int bnx2x_config_rx_mode(struct bnx2x *bp,
1462                         struct bnx2x_rx_mode_ramrod_params *p);
1463
1464/****************** MULTICASTS ****************/
1465
1466void bnx2x_init_mcast_obj(struct bnx2x *bp,
1467                          struct bnx2x_mcast_obj *mcast_obj,
1468                          u8 mcast_cl_id, u32 mcast_cid, u8 func_id,
1469                          u8 engine_id, void *rdata, dma_addr_t rdata_mapping,
1470                          int state, unsigned long *pstate,
1471                          bnx2x_obj_type type);
1472
1473/**
1474 * bnx2x_config_mcast - Configure multicast MACs list.
1475 *
1476 * @cmd: command to execute: BNX2X_MCAST_CMD_X
1477 *
1478 * May configure a new list
1479 * provided in p->mcast_list (BNX2X_MCAST_CMD_ADD), clean up
1480 * (BNX2X_MCAST_CMD_DEL) or restore (BNX2X_MCAST_CMD_RESTORE) a current
1481 * configuration, continue to execute the pending commands
1482 * (BNX2X_MCAST_CMD_CONT).
1483 *
1484 * If previous command is still pending or if number of MACs to
1485 * configure is more that maximum number of MACs in one command,
1486 * the current command will be enqueued to the tail of the
1487 * pending commands list.
1488 *
1489 * Return: 0 is operation was successful and there are no pending completions,
1490 *         negative if there were errors, positive if there are pending
1491 *         completions.
1492 */
1493int bnx2x_config_mcast(struct bnx2x *bp,
1494                       struct bnx2x_mcast_ramrod_params *p,
1495                       enum bnx2x_mcast_cmd cmd);
1496
1497/****************** CREDIT POOL ****************/
1498void bnx2x_init_mac_credit_pool(struct bnx2x *bp,
1499                                struct bnx2x_credit_pool_obj *p, u8 func_id,
1500                                u8 func_num);
1501void bnx2x_init_vlan_credit_pool(struct bnx2x *bp,
1502                                 struct bnx2x_credit_pool_obj *p, u8 func_id,
1503                                 u8 func_num);
1504void bnx2x_init_credit_pool(struct bnx2x_credit_pool_obj *p,
1505                            int base, int credit);
1506
1507/****************** RSS CONFIGURATION ****************/
1508void bnx2x_init_rss_config_obj(struct bnx2x *bp,
1509                               struct bnx2x_rss_config_obj *rss_obj,
1510                               u8 cl_id, u32 cid, u8 func_id, u8 engine_id,
1511                               void *rdata, dma_addr_t rdata_mapping,
1512                               int state, unsigned long *pstate,
1513                               bnx2x_obj_type type);
1514
1515/**
1516 * bnx2x_config_rss - Updates RSS configuration according to provided parameters
1517 *
1518 * Return: 0 in case of success
1519 */
1520int bnx2x_config_rss(struct bnx2x *bp,
1521                     struct bnx2x_config_rss_params *p);
1522
1523/**
1524 * bnx2x_get_rss_ind_table - Return the current ind_table configuration.
1525 *
1526 * @ind_table: buffer to fill with the current indirection
1527 *                  table content. Should be at least
1528 *                  T_ETH_INDIRECTION_TABLE_SIZE bytes long.
1529 */
1530void bnx2x_get_rss_ind_table(struct bnx2x_rss_config_obj *rss_obj,
1531                             u8 *ind_table);
1532
1533#define PF_MAC_CREDIT_E2(bp, func_num)                                  \
1534        ((MAX_MAC_CREDIT_E2 - GET_NUM_VFS_PER_PATH(bp) * VF_MAC_CREDIT_CNT) / \
1535         func_num + GET_NUM_VFS_PER_PF(bp) * VF_MAC_CREDIT_CNT)
1536
1537#define PF_VLAN_CREDIT_E2(bp, func_num)                                  \
1538        ((MAX_MAC_CREDIT_E2 - GET_NUM_VFS_PER_PATH(bp) * VF_VLAN_CREDIT_CNT) / \
1539         func_num + GET_NUM_VFS_PER_PF(bp) * VF_VLAN_CREDIT_CNT)
1540
1541#endif /* BNX2X_SP_VERBS */
1542