linux/drivers/video/fbdev/sstfb.c
<<
>>
Prefs
   1/*
   2 * linux/drivers/video/sstfb.c -- voodoo graphics frame buffer
   3 *
   4 *     Copyright (c) 2000-2002 Ghozlane Toumi <gtoumi@laposte.net>
   5 *
   6 *     Created 15 Jan 2000 by Ghozlane Toumi
   7 *
   8 * Contributions (and many thanks) :
   9 *
  10 * 03/2001 James Simmons   <jsimmons@infradead.org>
  11 * 04/2001 Paul Mundt      <lethal@chaoticdreams.org>
  12 * 05/2001 Urs Ganse       <ursg@uni.de>
  13 *      (initial work on voodoo2 port, interlace)
  14 * 09/2002 Helge Deller    <deller@gmx.de>
  15 *      (enable driver on big-endian machines (hppa), ioctl fixes)
  16 * 12/2002 Helge Deller    <deller@gmx.de>
  17 *      (port driver to new frambuffer infrastructure)
  18 * 01/2003 Helge Deller    <deller@gmx.de>
  19 *      (initial work on fb hardware acceleration for voodoo2)
  20 * 08/2006 Alan Cox        <alan@redhat.com>
  21 *      Remove never finished and bogus 24/32bit support
  22 *      Clean up macro abuse
  23 *      Minor tidying for format.
  24 * 12/2006 Helge Deller    <deller@gmx.de>
  25 *      add /sys/class/graphics/fbX/vgapass sysfs-interface
  26 *      add module option "mode_option" to set initial screen mode
  27 *      use fbdev default videomode database
  28 *      remove debug functions from ioctl
  29 */
  30
  31/*
  32 * The voodoo1 has the following memory mapped address space:
  33 * 0x000000 - 0x3fffff : registers              (4MB)
  34 * 0x400000 - 0x7fffff : linear frame buffer    (4MB)
  35 * 0x800000 - 0xffffff : texture memory         (8MB)
  36 */
  37
  38/*
  39 * misc notes, TODOs, toASKs, and deep thoughts
  40
  41-TODO: at one time or another test that the mode is acceptable by the monitor
  42-ASK: Can I choose different ordering for the color bitfields (rgba argb ...)
  43      which one should i use ? is there any preferred one ? It seems ARGB is
  44      the one ...
  45-TODO: in  set_var check the validity of timings (hsync vsync)...
  46-TODO: check and recheck the use of sst_wait_idle : we don't flush the fifo via
  47       a nop command. so it's ok as long as the commands we pass don't go
  48       through the fifo. warning: issuing a nop command seems to need pci_fifo
  49-FIXME: in case of failure in the init sequence, be sure we return to a safe
  50        state.
  51- FIXME: Use accelerator for 2D scroll
  52-FIXME: 4MB boards have banked memory (FbiInit2 bits 1 & 20)
  53 */
  54
  55/*
  56 * debug info
  57 * SST_DEBUG : enable debugging
  58 * SST_DEBUG_REG : debug registers
  59 *   0 :  no debug
  60 *   1 : dac calls, [un]set_bits, FbiInit
  61 *   2 : insane debug level (log every register read/write)
  62 * SST_DEBUG_FUNC : functions
  63 *   0 : no debug
  64 *   1 : function call / debug ioctl
  65 *   2 : variables
  66 *   3 : flood . you don't want to do that. trust me.
  67 * SST_DEBUG_VAR : debug display/var structs
  68 *   0 : no debug
  69 *   1 : dumps display, fb_var
  70 *
  71 * sstfb specific ioctls:
  72 *              toggle vga (0x46db) : toggle vga_pass_through
  73 */
  74
  75#undef SST_DEBUG
  76
  77
  78/*
  79 * Includes
  80 */
  81
  82#include <linux/string.h>
  83#include <linux/kernel.h>
  84#include <linux/module.h>
  85#include <linux/fb.h>
  86#include <linux/pci.h>
  87#include <linux/delay.h>
  88#include <linux/init.h>
  89#include <asm/io.h>
  90#include <linux/uaccess.h>
  91#include <video/sstfb.h>
  92
  93
  94/* initialized by setup */
  95
  96static bool vgapass;            /* enable VGA passthrough cable */
  97static int mem;                 /* mem size in MB, 0 = autodetect */
  98static bool clipping = 1;       /* use clipping (slower, safer) */
  99static int gfxclk;              /* force FBI freq in Mhz . Dangerous */
 100static bool slowpci;            /* slow PCI settings */
 101
 102/*
 103  Possible default video modes: 800x600@60, 640x480@75, 1024x768@76, 640x480@60
 104*/
 105#define DEFAULT_VIDEO_MODE "640x480@60"
 106
 107static char *mode_option = DEFAULT_VIDEO_MODE;
 108
 109enum {
 110        ID_VOODOO1 = 0,
 111        ID_VOODOO2 = 1,
 112};
 113
 114#define IS_VOODOO2(par) ((par)->type == ID_VOODOO2)
 115
 116static struct sst_spec voodoo_spec[] = {
 117 { .name = "Voodoo Graphics", .default_gfx_clock = 50000, .max_gfxclk = 60 },
 118 { .name = "Voodoo2",         .default_gfx_clock = 75000, .max_gfxclk = 85 },
 119};
 120
 121
 122/*
 123 * debug functions
 124 */
 125
 126#if (SST_DEBUG_REG > 0)
 127static void sst_dbg_print_read_reg(u32 reg, u32 val) {
 128        const char *regname;
 129        switch (reg) {
 130        case FBIINIT0:  regname = "FbiInit0"; break;
 131        case FBIINIT1:  regname = "FbiInit1"; break;
 132        case FBIINIT2:  regname = "FbiInit2"; break;
 133        case FBIINIT3:  regname = "FbiInit3"; break;
 134        case FBIINIT4:  regname = "FbiInit4"; break;
 135        case FBIINIT5:  regname = "FbiInit5"; break;
 136        case FBIINIT6:  regname = "FbiInit6"; break;
 137        default:        regname = NULL;       break;
 138        }
 139        if (regname == NULL)
 140                r_ddprintk("sst_read(%#x): %#x\n", reg, val);
 141        else
 142                r_dprintk(" sst_read(%s): %#x\n", regname, val);
 143}
 144
 145static void sst_dbg_print_write_reg(u32 reg, u32 val) {
 146        const char *regname;
 147        switch (reg) {
 148        case FBIINIT0:  regname = "FbiInit0"; break;
 149        case FBIINIT1:  regname = "FbiInit1"; break;
 150        case FBIINIT2:  regname = "FbiInit2"; break;
 151        case FBIINIT3:  regname = "FbiInit3"; break;
 152        case FBIINIT4:  regname = "FbiInit4"; break;
 153        case FBIINIT5:  regname = "FbiInit5"; break;
 154        case FBIINIT6:  regname = "FbiInit6"; break;
 155        default:        regname = NULL;       break;
 156        }
 157        if (regname == NULL)
 158                r_ddprintk("sst_write(%#x, %#x)\n", reg, val);
 159        else
 160                r_dprintk(" sst_write(%s, %#x)\n", regname, val);
 161}
 162#else /*  (SST_DEBUG_REG > 0) */
 163#  define sst_dbg_print_read_reg(reg, val)      do {} while(0)
 164#  define sst_dbg_print_write_reg(reg, val)     do {} while(0)
 165#endif /*  (SST_DEBUG_REG > 0) */
 166
 167/*
 168 * hardware access functions
 169 */
 170
 171/* register access */
 172#define sst_read(reg)           __sst_read(par->mmio_vbase, reg)
 173#define sst_write(reg,val)      __sst_write(par->mmio_vbase, reg, val)
 174#define sst_set_bits(reg,val)   __sst_set_bits(par->mmio_vbase, reg, val)
 175#define sst_unset_bits(reg,val) __sst_unset_bits(par->mmio_vbase, reg, val)
 176#define sst_dac_read(reg)       __sst_dac_read(par->mmio_vbase, reg)
 177#define sst_dac_write(reg,val)  __sst_dac_write(par->mmio_vbase, reg, val)
 178#define dac_i_read(reg)         __dac_i_read(par->mmio_vbase, reg)
 179#define dac_i_write(reg,val)    __dac_i_write(par->mmio_vbase, reg, val)
 180
 181static inline u32 __sst_read(u8 __iomem *vbase, u32 reg)
 182{
 183        u32 ret = readl(vbase + reg);
 184        sst_dbg_print_read_reg(reg, ret);
 185        return ret;
 186}
 187
 188static inline void __sst_write(u8 __iomem *vbase, u32 reg, u32 val)
 189{
 190        sst_dbg_print_write_reg(reg, val);
 191        writel(val, vbase + reg);
 192}
 193
 194static inline void __sst_set_bits(u8 __iomem *vbase, u32 reg, u32 val)
 195{
 196        r_dprintk("sst_set_bits(%#x, %#x)\n", reg, val);
 197        __sst_write(vbase, reg, __sst_read(vbase, reg) | val);
 198}
 199
 200static inline void __sst_unset_bits(u8 __iomem *vbase, u32 reg, u32 val)
 201{
 202        r_dprintk("sst_unset_bits(%#x, %#x)\n", reg, val);
 203        __sst_write(vbase, reg, __sst_read(vbase, reg) & ~val);
 204}
 205
 206/*
 207 * wait for the fbi chip. ASK: what happens if the fbi is stuck ?
 208 *
 209 * the FBI is supposed to be ready if we receive 5 time
 210 * in a row a "idle" answer to our requests
 211 */
 212
 213#define sst_wait_idle() __sst_wait_idle(par->mmio_vbase)
 214
 215static int __sst_wait_idle(u8 __iomem *vbase)
 216{
 217        int count = 0;
 218
 219        /* if (doFBINOP) __sst_write(vbase, NOPCMD, 0); */
 220
 221        while(1) {
 222                if (__sst_read(vbase, STATUS) & STATUS_FBI_BUSY) {
 223                        f_dddprintk("status: busy\n");
 224/* FIXME basically, this is a busy wait. maybe not that good. oh well;
 225 * this is a small loop after all.
 226 * Or maybe we should use mdelay() or udelay() here instead ? */
 227                        count = 0;
 228                } else {
 229                        count++;
 230                        f_dddprintk("status: idle(%d)\n", count);
 231                }
 232                if (count >= 5) return 1;
 233/* XXX  do something to avoid hanging the machine if the voodoo is out */
 234        }
 235}
 236
 237
 238/* dac access */
 239/* dac_read should be remaped to FbiInit2 (via the pci reg init_enable) */
 240static u8 __sst_dac_read(u8 __iomem *vbase, u8 reg)
 241{
 242        u8 ret;
 243
 244        reg &= 0x07;
 245        __sst_write(vbase, DAC_DATA, ((u32)reg << 8) | DAC_READ_CMD );
 246        __sst_wait_idle(vbase);
 247        /* udelay(10); */
 248        ret = __sst_read(vbase, DAC_READ) & 0xff;
 249        r_dprintk("sst_dac_read(%#x): %#x\n", reg, ret);
 250
 251        return ret;
 252}
 253
 254static void __sst_dac_write(u8 __iomem *vbase, u8 reg, u8 val)
 255{
 256        r_dprintk("sst_dac_write(%#x, %#x)\n", reg, val);
 257        reg &= 0x07;
 258        __sst_write(vbase, DAC_DATA,(((u32)reg << 8)) | (u32)val);
 259        __sst_wait_idle(vbase);
 260}
 261
 262/* indexed access to ti/att dacs */
 263static u32 __dac_i_read(u8 __iomem *vbase, u8 reg)
 264{
 265        u32 ret;
 266
 267        __sst_dac_write(vbase, DACREG_ADDR_I, reg);
 268        ret = __sst_dac_read(vbase, DACREG_DATA_I);
 269        r_dprintk("sst_dac_read_i(%#x): %#x\n", reg, ret);
 270        return ret;
 271}
 272static void __dac_i_write(u8 __iomem *vbase, u8 reg,u8 val)
 273{
 274        r_dprintk("sst_dac_write_i(%#x, %#x)\n", reg, val);
 275        __sst_dac_write(vbase, DACREG_ADDR_I, reg);
 276        __sst_dac_write(vbase, DACREG_DATA_I, val);
 277}
 278
 279/* compute the m,n,p  , returns the real freq
 280 * (ics datasheet :  N <-> N1 , P <-> N2)
 281 *
 282 * Fout= Fref * (M+2)/( 2^P * (N+2))
 283 *  we try to get close to the asked freq
 284 *  with P as high, and M as low as possible
 285 * range:
 286 * ti/att : 0 <= M <= 255; 0 <= P <= 3; 0<= N <= 63
 287 * ics    : 1 <= M <= 127; 0 <= P <= 3; 1<= N <= 31
 288 * we'll use the lowest limitation, should be precise enouth
 289 */
 290static int sst_calc_pll(const int freq, int *freq_out, struct pll_timing *t)
 291{
 292        int m, m2, n, p, best_err, fout;
 293        int best_n = -1;
 294        int best_m = -1;
 295
 296        best_err = freq;
 297        p = 3;
 298        /* f * 2^P = vco should be less than VCOmax ~ 250 MHz for ics*/
 299        while (((1 << p) * freq > VCO_MAX) && (p >= 0))
 300                p--;
 301        if (p == -1)
 302                return -EINVAL;
 303        for (n = 1; n < 32; n++) {
 304                /* calc 2 * m so we can round it later*/
 305                m2 = (2 * freq * (1 << p) * (n + 2) ) / DAC_FREF - 4 ;
 306
 307                m = (m2 % 2 ) ? m2/2+1 : m2/2 ;
 308                if (m >= 128)
 309                        break;
 310                fout = (DAC_FREF * (m + 2)) / ((1 << p) * (n + 2));
 311                if ((abs(fout - freq) < best_err) && (m > 0)) {
 312                        best_n = n;
 313                        best_m = m;
 314                        best_err = abs(fout - freq);
 315                        /* we get the lowest m , allowing 0.5% error in freq*/
 316                        if (200*best_err < freq) break;
 317                }
 318        }
 319        if (best_n == -1)  /* unlikely, but who knows ? */
 320                return -EINVAL;
 321        t->p = p;
 322        t->n = best_n;
 323        t->m = best_m;
 324        *freq_out = (DAC_FREF * (t->m + 2)) / ((1 << t->p) * (t->n + 2));
 325        f_ddprintk ("m: %d, n: %d, p: %d, F: %dKhz\n",
 326                  t->m, t->n, t->p, *freq_out);
 327        return 0;
 328}
 329
 330/*
 331 * clear lfb screen
 332 */
 333static void sstfb_clear_screen(struct fb_info *info)
 334{
 335        /* clear screen */
 336        fb_memset(info->screen_base, 0, info->fix.smem_len);
 337}
 338
 339
 340/**
 341 *      sstfb_check_var - Optional function.  Validates a var passed in.
 342 *      @var: frame buffer variable screen structure
 343 *      @info: frame buffer structure that represents a single frame buffer
 344 *
 345 *      Limit to the abilities of a single chip as SLI is not supported
 346 *      by this driver.
 347 */
 348
 349static int sstfb_check_var(struct fb_var_screeninfo *var,
 350                struct fb_info *info)
 351{
 352        struct sstfb_par *par = info->par;
 353        int hSyncOff   = var->xres + var->right_margin + var->left_margin;
 354        int vSyncOff   = var->yres + var->lower_margin + var->upper_margin;
 355        int vBackPorch = var->left_margin, yDim = var->yres;
 356        int vSyncOn    = var->vsync_len;
 357        int tiles_in_X, real_length;
 358        unsigned int freq;
 359
 360        if (sst_calc_pll(PICOS2KHZ(var->pixclock), &freq, &par->pll)) {
 361                printk(KERN_ERR "sstfb: Pixclock at %ld KHZ out of range\n",
 362                                PICOS2KHZ(var->pixclock));
 363                return -EINVAL;
 364        }
 365        var->pixclock = KHZ2PICOS(freq);
 366        
 367        if (var->vmode & FB_VMODE_INTERLACED)
 368                vBackPorch += (vBackPorch % 2);
 369        if (var->vmode & FB_VMODE_DOUBLE) {
 370                vBackPorch <<= 1;
 371                yDim <<=1;
 372                vSyncOn <<=1;
 373                vSyncOff <<=1;
 374        }
 375
 376        switch (var->bits_per_pixel) {
 377        case 0 ... 16 :
 378                var->bits_per_pixel = 16;
 379                break;
 380        default :
 381                printk(KERN_ERR "sstfb: Unsupported bpp %d\n", var->bits_per_pixel);
 382                return -EINVAL;
 383        }
 384        
 385        /* validity tests */
 386        if (var->xres <= 1 || yDim <= 0 || var->hsync_len <= 1  ||
 387            hSyncOff <= 1  || var->left_margin <= 2  || vSyncOn <= 0 ||
 388            vSyncOff <= 0 || vBackPorch <= 0) {
 389                return -EINVAL;
 390        }
 391
 392        if (IS_VOODOO2(par)) {
 393                /* Voodoo 2 limits */
 394                tiles_in_X = (var->xres + 63 ) / 64 * 2;                
 395
 396                if (var->xres  > POW2(11) || yDim >= POW2(11)) {
 397                        printk(KERN_ERR "sstfb: Unsupported resolution %dx%d\n",
 398                                 var->xres, var->yres);
 399                        return -EINVAL;
 400                }
 401
 402                if (var->hsync_len > POW2(9) || hSyncOff > POW2(11) ||
 403                    var->left_margin - 2 >= POW2(9) || vSyncOn >= POW2(13) ||
 404                    vSyncOff >= POW2(13) || vBackPorch >= POW2(9) ||
 405                    tiles_in_X >= POW2(6) || tiles_in_X <= 0) {
 406                        printk(KERN_ERR "sstfb: Unsupported timings\n");
 407                        return -EINVAL;
 408                }
 409        } else {
 410                /* Voodoo limits */
 411                tiles_in_X = (var->xres + 63 ) / 64;
 412
 413                if (var->vmode) {
 414                        printk(KERN_ERR "sstfb: Interlace/doublescan not supported %#x\n",
 415                                var->vmode);
 416                        return -EINVAL;
 417                }
 418                if (var->xres > POW2(10) || var->yres >= POW2(10)) {
 419                        printk(KERN_ERR "sstfb: Unsupported resolution %dx%d\n",
 420                                 var->xres, var->yres);
 421                        return -EINVAL;
 422                }
 423                if (var->hsync_len > POW2(8) || hSyncOff - 1 > POW2(10) ||
 424                    var->left_margin - 2 >= POW2(8) || vSyncOn >= POW2(12) ||
 425                    vSyncOff >= POW2(12) || vBackPorch >= POW2(8) ||
 426                    tiles_in_X >= POW2(4) || tiles_in_X <= 0) {
 427                        printk(KERN_ERR "sstfb: Unsupported timings\n");
 428                        return -EINVAL;
 429                }
 430        }
 431
 432        /* it seems that the fbi uses tiles of 64x16 pixels to "map" the mem */
 433        /* FIXME: i don't like this... looks wrong */
 434        real_length = tiles_in_X  * (IS_VOODOO2(par) ? 32 : 64 )
 435                      * ((var->bits_per_pixel == 16) ? 2 : 4);
 436
 437        if (real_length * yDim > info->fix.smem_len) {
 438                printk(KERN_ERR "sstfb: Not enough video memory\n");
 439                return -ENOMEM;
 440        }
 441
 442        var->sync &= (FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT);
 443        var->vmode &= (FB_VMODE_INTERLACED | FB_VMODE_DOUBLE);
 444        var->xoffset = 0;
 445        var->yoffset = 0;
 446        var->height  = -1;
 447        var->width   = -1;
 448
 449        /*
 450         * correct the color bit fields
 451         */
 452        /* var->{red|green|blue}.msb_right = 0; */
 453
 454        switch (var->bits_per_pixel) {
 455        case 16:        /* RGB 565  LfbMode 0 */
 456                var->red.length    = 5;
 457                var->green.length  = 6;
 458                var->blue.length   = 5;
 459                var->transp.length = 0;
 460
 461                var->red.offset    = 11;
 462                var->green.offset  = 5;
 463                var->blue.offset   = 0;
 464                var->transp.offset = 0;
 465                break;
 466        default:
 467                return -EINVAL;
 468        }
 469        return 0;
 470}
 471
 472/**
 473 *      sstfb_set_par - Optional function.  Alters the hardware state.
 474 *      @info: frame buffer structure that represents a single frame buffer
 475 */
 476static int sstfb_set_par(struct fb_info *info)
 477{
 478        struct sstfb_par *par = info->par;
 479        u32 lfbmode, fbiinit1, fbiinit2, fbiinit3, fbiinit5, fbiinit6=0;
 480        struct pci_dev *sst_dev = par->dev;
 481        unsigned int freq;
 482        int ntiles;
 483
 484        par->hSyncOff   = info->var.xres + info->var.right_margin + info->var.left_margin;
 485
 486        par->yDim       = info->var.yres;
 487        par->vSyncOn    = info->var.vsync_len;
 488        par->vSyncOff   = info->var.yres + info->var.lower_margin + info->var.upper_margin;
 489        par->vBackPorch = info->var.upper_margin;
 490
 491        /* We need par->pll */
 492        sst_calc_pll(PICOS2KHZ(info->var.pixclock), &freq, &par->pll);
 493
 494        if (info->var.vmode & FB_VMODE_INTERLACED)
 495                par->vBackPorch += (par->vBackPorch % 2);
 496        if (info->var.vmode & FB_VMODE_DOUBLE) {
 497                par->vBackPorch <<= 1;
 498                par->yDim <<=1;
 499                par->vSyncOn <<=1;
 500                par->vSyncOff <<=1;
 501        }
 502
 503        if (IS_VOODOO2(par)) {
 504                /* voodoo2 has 32 pixel wide tiles , BUT strange things
 505                   happen with odd number of tiles */
 506                par->tiles_in_X = (info->var.xres + 63 ) / 64 * 2;
 507        } else {
 508                /* voodoo1 has 64 pixels wide tiles. */
 509                par->tiles_in_X = (info->var.xres + 63 ) / 64;
 510        }
 511
 512        f_ddprintk("hsync_len hSyncOff vsync_len vSyncOff\n");
 513        f_ddprintk("%-7d %-8d %-7d %-8d\n",
 514                   info->var.hsync_len, par->hSyncOff,
 515                   par->vSyncOn, par->vSyncOff);
 516        f_ddprintk("left_margin upper_margin xres yres Freq\n");
 517        f_ddprintk("%-10d %-10d %-4d %-4d %-8ld\n",
 518                   info->var.left_margin, info->var.upper_margin,
 519                   info->var.xres, info->var.yres, PICOS2KHZ(info->var.pixclock));
 520
 521        sst_write(NOPCMD, 0);
 522        sst_wait_idle();
 523        pci_write_config_dword(sst_dev, PCI_INIT_ENABLE, PCI_EN_INIT_WR);
 524        sst_set_bits(FBIINIT1, VIDEO_RESET);
 525        sst_set_bits(FBIINIT0, FBI_RESET | FIFO_RESET);
 526        sst_unset_bits(FBIINIT2, EN_DRAM_REFRESH);
 527        sst_wait_idle();
 528
 529        /*sst_unset_bits (FBIINIT0, FBI_RESET); / reenable FBI ? */
 530
 531        sst_write(BACKPORCH, par->vBackPorch << 16 | (info->var.left_margin - 2));
 532        sst_write(VIDEODIMENSIONS, par->yDim << 16 | (info->var.xres - 1));
 533        sst_write(HSYNC, (par->hSyncOff - 1) << 16 | (info->var.hsync_len - 1));
 534        sst_write(VSYNC,       par->vSyncOff << 16 | par->vSyncOn);
 535
 536        fbiinit2 = sst_read(FBIINIT2);
 537        fbiinit3 = sst_read(FBIINIT3);
 538
 539        /* everything is reset. we enable fbiinit2/3 remap : dac access ok */
 540        pci_write_config_dword(sst_dev, PCI_INIT_ENABLE,
 541                               PCI_EN_INIT_WR | PCI_REMAP_DAC );
 542
 543        par->dac_sw.set_vidmod(info, info->var.bits_per_pixel);
 544
 545        /* set video clock */
 546        par->dac_sw.set_pll(info, &par->pll, VID_CLOCK);
 547
 548        /* disable fbiinit2/3 remap */
 549        pci_write_config_dword(sst_dev, PCI_INIT_ENABLE,
 550                               PCI_EN_INIT_WR);
 551
 552        /* restore fbiinit2/3 */
 553        sst_write(FBIINIT2,fbiinit2);
 554        sst_write(FBIINIT3,fbiinit3);
 555
 556        fbiinit1 = (sst_read(FBIINIT1) & VIDEO_MASK)
 557                    | EN_DATA_OE
 558                    | EN_BLANK_OE
 559                    | EN_HVSYNC_OE
 560                    | EN_DCLK_OE
 561                 /* | (15 << TILES_IN_X_SHIFT) */
 562                    | SEL_INPUT_VCLK_2X
 563                 /* | (2 << VCLK_2X_SEL_DEL_SHIFT)
 564                    | (2 << VCLK_DEL_SHIFT) */;
 565/* try with vclk_in_delay =0 (bits 29:30) , vclk_out_delay =0 (bits(27:28)
 566 in (near) future set them accordingly to revision + resolution (cf glide)
 567 first understand what it stands for :)
 568 FIXME: there are some artefacts... check for the vclk_in_delay
 569 lets try with 6ns delay in both vclk_out & in...
 570 doh... they're still there :\
 571*/
 572
 573        ntiles = par->tiles_in_X;
 574        if (IS_VOODOO2(par)) {
 575                fbiinit1 |= ((ntiles & 0x20) >> 5) << TILES_IN_X_MSB_SHIFT
 576                            | ((ntiles & 0x1e) >> 1) << TILES_IN_X_SHIFT;
 577/* as the only value of importance for us in fbiinit6 is tiles in X (lsb),
 578   and as reading fbinit 6 will return crap (see FBIINIT6_DEFAULT) we just
 579   write our value. BTW due to the dac unable to read odd number of tiles, this
 580   field is always null ... */
 581                fbiinit6 = (ntiles & 0x1) << TILES_IN_X_LSB_SHIFT;
 582        }
 583        else
 584                fbiinit1 |= ntiles << TILES_IN_X_SHIFT;
 585
 586        switch (info->var.bits_per_pixel) {
 587        case 16:
 588                fbiinit1 |=  SEL_SOURCE_VCLK_2X_SEL;
 589                break;
 590        default:
 591                return -EINVAL;
 592        }
 593        sst_write(FBIINIT1, fbiinit1);
 594        if (IS_VOODOO2(par)) {
 595                sst_write(FBIINIT6, fbiinit6);
 596                fbiinit5=sst_read(FBIINIT5) & FBIINIT5_MASK ;
 597                if (info->var.vmode & FB_VMODE_INTERLACED)
 598                        fbiinit5 |= INTERLACE;
 599                if (info->var.vmode & FB_VMODE_DOUBLE)
 600                        fbiinit5 |= VDOUBLESCAN;
 601                if (info->var.sync & FB_SYNC_HOR_HIGH_ACT)
 602                        fbiinit5 |= HSYNC_HIGH;
 603                if (info->var.sync & FB_SYNC_VERT_HIGH_ACT)
 604                        fbiinit5 |= VSYNC_HIGH;
 605                sst_write(FBIINIT5, fbiinit5);
 606        }
 607        sst_wait_idle();
 608        sst_unset_bits(FBIINIT1, VIDEO_RESET);
 609        sst_unset_bits(FBIINIT0, FBI_RESET | FIFO_RESET);
 610        sst_set_bits(FBIINIT2, EN_DRAM_REFRESH);
 611        /* disables fbiinit writes */
 612        pci_write_config_dword(sst_dev, PCI_INIT_ENABLE, PCI_EN_FIFO_WR);
 613
 614        /* set lfbmode : set mode + front buffer for reads/writes
 615           + disable pipeline */
 616        switch (info->var.bits_per_pixel) {
 617        case 16:
 618                lfbmode = LFB_565;
 619                break;
 620        default:
 621                return -EINVAL;
 622        }
 623
 624#if defined(__BIG_ENDIAN)
 625        /* Enable byte-swizzle functionality in hardware.
 626         * With this enabled, all our read- and write-accesses to
 627         * the voodoo framebuffer can be done in native format, and
 628         * the hardware will automatically convert it to little-endian.
 629         * - tested on HP-PARISC, Helge Deller <deller@gmx.de> */
 630        lfbmode |= ( LFB_WORD_SWIZZLE_WR | LFB_BYTE_SWIZZLE_WR |
 631                     LFB_WORD_SWIZZLE_RD | LFB_BYTE_SWIZZLE_RD );
 632#endif
 633        
 634        if (clipping) {
 635                sst_write(LFBMODE, lfbmode | EN_PXL_PIPELINE);
 636        /*
 637         * Set "clipping" dimensions. If clipping is disabled and
 638         * writes to offscreen areas of the framebuffer are performed,
 639         * the "behaviour is undefined" (_very_ undefined) - Urs
 640         */
 641        /* btw, it requires enabling pixel pipeline in LFBMODE .
 642           off screen read/writes will just wrap and read/print pixels
 643           on screen. Ugly but not that dangerous */
 644                f_ddprintk("setting clipping dimensions 0..%d, 0..%d\n",
 645                            info->var.xres - 1, par->yDim - 1);
 646
 647                sst_write(CLIP_LEFT_RIGHT, info->var.xres);
 648                sst_write(CLIP_LOWY_HIGHY, par->yDim);
 649                sst_set_bits(FBZMODE, EN_CLIPPING | EN_RGB_WRITE);
 650        } else {
 651                /* no clipping : direct access, no pipeline */
 652                sst_write(LFBMODE, lfbmode);
 653        }
 654        return 0;
 655}
 656
 657/**
 658 *      sstfb_setcolreg - Optional function. Sets a color register.
 659 *      @regno: hardware colormap register
 660 *      @red: frame buffer colormap structure
 661 *      @green: The green value which can be up to 16 bits wide
 662 *      @blue:  The blue value which can be up to 16 bits wide.
 663 *      @transp: If supported the alpha value which can be up to 16 bits wide.
 664 *      @info: frame buffer info structure
 665 */
 666static int sstfb_setcolreg(u_int regno, u_int red, u_int green, u_int blue,
 667                           u_int transp, struct fb_info *info)
 668{
 669        struct sstfb_par *par = info->par;
 670        u32 col;
 671
 672        f_dddprintk("sstfb_setcolreg\n");
 673        f_dddprintk("%-2d rgbt: %#x, %#x, %#x, %#x\n",
 674                    regno, red, green, blue, transp);
 675        if (regno > 15)
 676                return 0;
 677
 678        red    >>= (16 - info->var.red.length);
 679        green  >>= (16 - info->var.green.length);
 680        blue   >>= (16 - info->var.blue.length);
 681        transp >>= (16 - info->var.transp.length);
 682        col = (red << info->var.red.offset)
 683            | (green << info->var.green.offset)
 684            | (blue  << info->var.blue.offset)
 685            | (transp << info->var.transp.offset);
 686        
 687        par->palette[regno] = col;
 688
 689        return 0;
 690}
 691
 692static void sstfb_setvgapass( struct fb_info *info, int enable )
 693{
 694        struct sstfb_par *par = info->par;
 695        struct pci_dev *sst_dev = par->dev;
 696        u32 fbiinit0, tmp;
 697
 698        enable = enable ? 1:0;
 699        if (par->vgapass == enable)
 700                return;
 701        par->vgapass = enable;
 702
 703        pci_read_config_dword(sst_dev, PCI_INIT_ENABLE, &tmp);
 704        pci_write_config_dword(sst_dev, PCI_INIT_ENABLE,
 705                               tmp | PCI_EN_INIT_WR );
 706        fbiinit0 = sst_read (FBIINIT0);
 707        if (par->vgapass) {
 708                sst_write(FBIINIT0, fbiinit0 & ~DIS_VGA_PASSTHROUGH);
 709                fb_info(info, "Enabling VGA pass-through\n");
 710        } else {
 711                sst_write(FBIINIT0, fbiinit0 | DIS_VGA_PASSTHROUGH);
 712                fb_info(info, "Disabling VGA pass-through\n");
 713        }
 714        pci_write_config_dword(sst_dev, PCI_INIT_ENABLE, tmp);
 715}
 716
 717static ssize_t store_vgapass(struct device *device, struct device_attribute *attr,
 718                        const char *buf, size_t count)
 719{
 720        struct fb_info *info = dev_get_drvdata(device);
 721        char ** last = NULL;
 722        int val;
 723
 724        val = simple_strtoul(buf, last, 0);
 725        sstfb_setvgapass(info, val);
 726
 727        return count;
 728}
 729
 730static ssize_t show_vgapass(struct device *device, struct device_attribute *attr,
 731                        char *buf)
 732{
 733        struct fb_info *info = dev_get_drvdata(device);
 734        struct sstfb_par *par = info->par;
 735        return snprintf(buf, PAGE_SIZE, "%d\n", par->vgapass);
 736}
 737
 738static struct device_attribute device_attrs[] = {
 739        __ATTR(vgapass, S_IRUGO|S_IWUSR, show_vgapass, store_vgapass)
 740        };
 741
 742static int sstfb_ioctl(struct fb_info *info, unsigned int cmd,
 743                        unsigned long arg)
 744{
 745        struct sstfb_par *par;
 746        u32 val;
 747
 748        switch (cmd) {
 749        /* set/get VGA pass_through mode */
 750        case SSTFB_SET_VGAPASS:
 751                if (copy_from_user(&val, (void __user *)arg, sizeof(val)))
 752                        return -EFAULT;
 753                sstfb_setvgapass(info, val);
 754                return 0;
 755        case SSTFB_GET_VGAPASS:
 756                par = info->par;
 757                val = par->vgapass;
 758                if (copy_to_user((void __user *)arg, &val, sizeof(val)))
 759                        return -EFAULT;
 760                return 0;
 761        }
 762
 763        return -EINVAL;
 764}
 765
 766
 767/*
 768 * Screen-to-Screen BitBlt 2D command (for the bmove fb op.) - Voodoo2 only
 769 */
 770#if 0
 771static void sstfb_copyarea(struct fb_info *info, const struct fb_copyarea *area)
 772{
 773        struct sstfb_par *par = info->par;
 774        u32 stride = info->fix.line_length;
 775   
 776        if (!IS_VOODOO2(par))
 777                return;
 778
 779        sst_write(BLTSRCBASEADDR, 0);
 780        sst_write(BLTDSTBASEADDR, 0);
 781        sst_write(BLTROP, BLTROP_COPY);
 782        sst_write(BLTXYSTRIDES, stride | (stride << 16));
 783        sst_write(BLTSRCXY, area->sx | (area->sy << 16));
 784        sst_write(BLTDSTXY, area->dx | (area->dy << 16));
 785        sst_write(BLTSIZE, area->width | (area->height << 16));
 786        sst_write(BLTCOMMAND, BLT_SCR2SCR_BITBLT | LAUNCH_BITBLT |
 787                (BLT_16BPP_FMT << 3) /* | BIT(14) */ | BIT(15) );
 788        sst_wait_idle();
 789}
 790#endif
 791
 792
 793/*
 794 * FillRect 2D command (solidfill or invert (via ROP_XOR)) - Voodoo2 only
 795 */
 796#if 0
 797static void sstfb_fillrect(struct fb_info *info, const struct fb_fillrect *rect) 
 798{
 799        struct sstfb_par *par = info->par;
 800        u32 stride = info->fix.line_length;
 801
 802        if (!IS_VOODOO2(par))
 803                return;
 804        
 805        sst_write(BLTCLIPX, info->var.xres);
 806        sst_write(BLTCLIPY, info->var.yres);
 807        
 808        sst_write(BLTDSTBASEADDR, 0);
 809        sst_write(BLTCOLOR, rect->color);
 810        sst_write(BLTROP, rect->rop == ROP_COPY ? BLTROP_COPY : BLTROP_XOR);
 811        sst_write(BLTXYSTRIDES, stride | (stride << 16));
 812        sst_write(BLTDSTXY, rect->dx | (rect->dy << 16));
 813        sst_write(BLTSIZE, rect->width | (rect->height << 16));
 814        sst_write(BLTCOMMAND, BLT_RECFILL_BITBLT | LAUNCH_BITBLT
 815                 | (BLT_16BPP_FMT << 3) /* | BIT(14) */ | BIT(15) | BIT(16) );
 816        sst_wait_idle();
 817}
 818#endif
 819
 820
 821
 822/* 
 823 * get lfb size 
 824 */
 825static int sst_get_memsize(struct fb_info *info, __u32 *memsize)
 826{
 827        u8 __iomem *fbbase_virt = info->screen_base;
 828
 829        /* force memsize */
 830        if (mem >= 1  && mem <= 4) {
 831                *memsize = (mem * 0x100000);
 832                printk(KERN_INFO "supplied memsize: %#x\n", *memsize);
 833                return 1;
 834        }
 835
 836        writel(0xdeadbeef, fbbase_virt);
 837        writel(0xdeadbeef, fbbase_virt+0x100000);
 838        writel(0xdeadbeef, fbbase_virt+0x200000);
 839        f_ddprintk("0MB: %#x, 1MB: %#x, 2MB: %#x\n",
 840                   readl(fbbase_virt), readl(fbbase_virt + 0x100000),
 841                   readl(fbbase_virt + 0x200000));
 842
 843        writel(0xabcdef01, fbbase_virt);
 844
 845        f_ddprintk("0MB: %#x, 1MB: %#x, 2MB: %#x\n",
 846                   readl(fbbase_virt), readl(fbbase_virt + 0x100000),
 847                   readl(fbbase_virt + 0x200000));
 848
 849        /* checks for 4mb lfb, then 2, then defaults to 1 */
 850        if (readl(fbbase_virt + 0x200000) == 0xdeadbeef)
 851                *memsize = 0x400000;
 852        else if (readl(fbbase_virt + 0x100000) == 0xdeadbeef)
 853                *memsize = 0x200000;
 854        else
 855                *memsize = 0x100000;
 856        f_ddprintk("detected memsize: %dMB\n", *memsize >> 20);
 857        return 1;
 858}
 859
 860
 861/* 
 862 * DAC detection routines 
 863 */
 864
 865/* fbi should be idle, and fifo emty and mem disabled */
 866/* supposed to detect AT&T ATT20C409 and Ti TVP3409 ramdacs */
 867
 868static int sst_detect_att(struct fb_info *info)
 869{
 870        struct sstfb_par *par = info->par;
 871        int i, mir, dir;
 872
 873        for (i = 0; i < 3; i++) {
 874                sst_dac_write(DACREG_WMA, 0);   /* backdoor */
 875                sst_dac_read(DACREG_RMR);       /* read 4 times RMR */
 876                sst_dac_read(DACREG_RMR);
 877                sst_dac_read(DACREG_RMR);
 878                sst_dac_read(DACREG_RMR);
 879                /* the fifth time,  CR0 is read */
 880                sst_dac_read(DACREG_RMR);
 881                /* the 6th, manufacturer id register */
 882                mir = sst_dac_read(DACREG_RMR);
 883                /*the 7th, device ID register */
 884                dir = sst_dac_read(DACREG_RMR);
 885                f_ddprintk("mir: %#x, dir: %#x\n", mir, dir);
 886                if (mir == DACREG_MIR_ATT && dir == DACREG_DIR_ATT) {
 887                        return 1;
 888                }
 889        }
 890        return 0;
 891}
 892
 893static int sst_detect_ti(struct fb_info *info)
 894{
 895        struct sstfb_par *par = info->par;
 896        int i, mir, dir;
 897
 898        for (i = 0; i<3; i++) {
 899                sst_dac_write(DACREG_WMA, 0);   /* backdoor */
 900                sst_dac_read(DACREG_RMR);       /* read 4 times RMR */
 901                sst_dac_read(DACREG_RMR);
 902                sst_dac_read(DACREG_RMR);
 903                sst_dac_read(DACREG_RMR);
 904                /* the fifth time,  CR0 is read */
 905                sst_dac_read(DACREG_RMR);
 906                /* the 6th, manufacturer id register */
 907                mir = sst_dac_read(DACREG_RMR);
 908                /*the 7th, device ID register */
 909                dir = sst_dac_read(DACREG_RMR);
 910                f_ddprintk("mir: %#x, dir: %#x\n", mir, dir);
 911                if ((mir == DACREG_MIR_TI ) && (dir == DACREG_DIR_TI)) {
 912                        return 1;
 913                }
 914        }
 915        return 0;
 916}
 917
 918/*
 919 * try to detect ICS5342  ramdac
 920 * we get the 1st byte (M value) of preset f1,f7 and fB
 921 * why those 3 ? mmmh... for now, i'll do it the glide way...
 922 * and ask questions later. anyway, it seems that all the freq registers are
 923 * really at their default state (cf specs) so i ask again, why those 3 regs ?
 924 * mmmmh.. it seems that's much more ugly than i thought. we use f0 and fA for
 925 * pll programming, so in fact, we *hope* that the f1, f7 & fB won't be
 926 * touched...
 927 * is it really safe ? how can i reset this ramdac ? geee...
 928 */
 929static int sst_detect_ics(struct fb_info *info)
 930{
 931        struct sstfb_par *par = info->par;
 932        int m_clk0_1, m_clk0_7, m_clk1_b;
 933        int n_clk0_1, n_clk0_7, n_clk1_b;
 934        int i;
 935
 936        for (i = 0; i<5; i++ ) {
 937                sst_dac_write(DACREG_ICS_PLLRMA, 0x1);  /* f1 */
 938                m_clk0_1 = sst_dac_read(DACREG_ICS_PLLDATA);
 939                n_clk0_1 = sst_dac_read(DACREG_ICS_PLLDATA);
 940                sst_dac_write(DACREG_ICS_PLLRMA, 0x7);  /* f7 */
 941                m_clk0_7 = sst_dac_read(DACREG_ICS_PLLDATA);
 942                n_clk0_7 = sst_dac_read(DACREG_ICS_PLLDATA);
 943                sst_dac_write(DACREG_ICS_PLLRMA, 0xb);  /* fB */
 944                m_clk1_b= sst_dac_read(DACREG_ICS_PLLDATA);
 945                n_clk1_b= sst_dac_read(DACREG_ICS_PLLDATA);
 946                f_ddprintk("m_clk0_1: %#x, m_clk0_7: %#x, m_clk1_b: %#x\n",
 947                        m_clk0_1, m_clk0_7, m_clk1_b);
 948                f_ddprintk("n_clk0_1: %#x, n_clk0_7: %#x, n_clk1_b: %#x\n",
 949                        n_clk0_1, n_clk0_7, n_clk1_b);
 950                if ((   m_clk0_1 == DACREG_ICS_PLL_CLK0_1_INI)
 951                    && (m_clk0_7 == DACREG_ICS_PLL_CLK0_7_INI)
 952                    && (m_clk1_b == DACREG_ICS_PLL_CLK1_B_INI)) {
 953                        return 1;
 954                }
 955        }
 956        return 0;
 957}
 958
 959
 960/*
 961 * gfx, video, pci fifo should be reset, dram refresh disabled
 962 * see detect_dac
 963 */
 964
 965static int sst_set_pll_att_ti(struct fb_info *info, 
 966                const struct pll_timing *t, const int clock)
 967{
 968        struct sstfb_par *par = info->par;
 969        u8 cr0, cc;
 970
 971        /* enable indexed mode */
 972        sst_dac_write(DACREG_WMA, 0);   /* backdoor */
 973        sst_dac_read(DACREG_RMR);       /* 1 time:  RMR */
 974        sst_dac_read(DACREG_RMR);       /* 2 RMR */
 975        sst_dac_read(DACREG_RMR);       /* 3 //  */
 976        sst_dac_read(DACREG_RMR);       /* 4 //  */
 977        cr0 = sst_dac_read(DACREG_RMR); /* 5 CR0 */
 978
 979        sst_dac_write(DACREG_WMA, 0);
 980        sst_dac_read(DACREG_RMR);
 981        sst_dac_read(DACREG_RMR);
 982        sst_dac_read(DACREG_RMR);
 983        sst_dac_read(DACREG_RMR);
 984        sst_dac_write(DACREG_RMR, (cr0 & 0xf0)
 985                      | DACREG_CR0_EN_INDEXED
 986                      | DACREG_CR0_8BIT
 987                      | DACREG_CR0_PWDOWN );
 988        /* so, now we are in indexed mode . dunno if its common, but
 989           i find this way of doing things a little bit weird :p */
 990
 991        udelay(300);
 992        cc = dac_i_read(DACREG_CC_I);
 993        switch (clock) {
 994        case VID_CLOCK:
 995                dac_i_write(DACREG_AC0_I, t->m);
 996                dac_i_write(DACREG_AC1_I, t->p << 6 | t->n);
 997                dac_i_write(DACREG_CC_I,
 998                            (cc & 0x0f) | DACREG_CC_CLKA | DACREG_CC_CLKA_C);
 999                break;
1000        case GFX_CLOCK:
1001                dac_i_write(DACREG_BD0_I, t->m);
1002                dac_i_write(DACREG_BD1_I, t->p << 6 | t->n);
1003                dac_i_write(DACREG_CC_I,
1004                            (cc & 0xf0) | DACREG_CC_CLKB | DACREG_CC_CLKB_D);
1005                break;
1006        default:
1007                dprintk("%s: wrong clock code '%d'\n",
1008                        __func__, clock);
1009                return 0;
1010                }
1011        udelay(300);
1012
1013        /* power up the dac & return to "normal" non-indexed mode */
1014        dac_i_write(DACREG_CR0_I,
1015                    cr0 & ~DACREG_CR0_PWDOWN & ~DACREG_CR0_EN_INDEXED);
1016        return 1;
1017}
1018
1019static int sst_set_pll_ics(struct fb_info *info,
1020                const struct pll_timing *t, const int clock)
1021{
1022        struct sstfb_par *par = info->par;
1023        u8 pll_ctrl;
1024
1025        sst_dac_write(DACREG_ICS_PLLRMA, DACREG_ICS_PLL_CTRL);
1026        pll_ctrl = sst_dac_read(DACREG_ICS_PLLDATA);
1027        switch(clock) {
1028        case VID_CLOCK:
1029                sst_dac_write(DACREG_ICS_PLLWMA, 0x0);  /* CLK0, f0 */
1030                sst_dac_write(DACREG_ICS_PLLDATA, t->m);
1031                sst_dac_write(DACREG_ICS_PLLDATA, t->p << 5 | t->n);
1032                /* selects freq f0 for clock 0 */
1033                sst_dac_write(DACREG_ICS_PLLWMA, DACREG_ICS_PLL_CTRL);
1034                sst_dac_write(DACREG_ICS_PLLDATA,
1035                              (pll_ctrl & 0xd8)
1036                              | DACREG_ICS_CLK0
1037                              | DACREG_ICS_CLK0_0);
1038                break;
1039        case GFX_CLOCK :
1040                sst_dac_write(DACREG_ICS_PLLWMA, 0xa);  /* CLK1, fA */
1041                sst_dac_write(DACREG_ICS_PLLDATA, t->m);
1042                sst_dac_write(DACREG_ICS_PLLDATA, t->p << 5 | t->n);
1043                /* selects freq fA for clock 1 */
1044                sst_dac_write(DACREG_ICS_PLLWMA, DACREG_ICS_PLL_CTRL);
1045                sst_dac_write(DACREG_ICS_PLLDATA,
1046                              (pll_ctrl & 0xef) | DACREG_ICS_CLK1_A);
1047                break;
1048        default:
1049                dprintk("%s: wrong clock code '%d'\n",
1050                        __func__, clock);
1051                return 0;
1052                }
1053        udelay(300);
1054        return 1;
1055}
1056
1057static void sst_set_vidmod_att_ti(struct fb_info *info, const int bpp)
1058{
1059        struct sstfb_par *par = info->par;
1060        u8 cr0;
1061
1062        sst_dac_write(DACREG_WMA, 0);   /* backdoor */
1063        sst_dac_read(DACREG_RMR);       /* read 4 times RMR */
1064        sst_dac_read(DACREG_RMR);
1065        sst_dac_read(DACREG_RMR);
1066        sst_dac_read(DACREG_RMR);
1067        /* the fifth time,  CR0 is read */
1068        cr0 = sst_dac_read(DACREG_RMR);
1069
1070        sst_dac_write(DACREG_WMA, 0);   /* backdoor */
1071        sst_dac_read(DACREG_RMR);       /* read 4 times RMR */
1072        sst_dac_read(DACREG_RMR);
1073        sst_dac_read(DACREG_RMR);
1074        sst_dac_read(DACREG_RMR);
1075        /* cr0 */
1076        switch(bpp) {
1077        case 16:
1078                sst_dac_write(DACREG_RMR, (cr0 & 0x0f) | DACREG_CR0_16BPP);
1079                break;
1080        default:
1081                dprintk("%s: bad depth '%u'\n", __func__, bpp);
1082                break;
1083        }
1084}
1085
1086static void sst_set_vidmod_ics(struct fb_info *info, const int bpp)
1087{
1088        struct sstfb_par *par = info->par;
1089
1090        switch(bpp) {
1091        case 16:
1092                sst_dac_write(DACREG_ICS_CMD, DACREG_ICS_CMD_16BPP);
1093                break;
1094        default:
1095                dprintk("%s: bad depth '%u'\n", __func__, bpp);
1096                break;
1097        }
1098}
1099
1100/*
1101 * detect dac type
1102 * prerequisite : write to FbiInitx enabled, video and fbi and pci fifo reset,
1103 * dram refresh disabled, FbiInit remaped.
1104 * TODO: mmh.. maybe i should put the "prerequisite" in the func ...
1105 */
1106
1107
1108static struct dac_switch dacs[] = {
1109        {       .name           = "TI TVP3409",
1110                .detect         = sst_detect_ti,
1111                .set_pll        = sst_set_pll_att_ti,
1112                .set_vidmod     = sst_set_vidmod_att_ti },
1113
1114        {       .name           = "AT&T ATT20C409",
1115                .detect         = sst_detect_att,
1116                .set_pll        = sst_set_pll_att_ti,
1117                .set_vidmod     = sst_set_vidmod_att_ti },
1118        {       .name           = "ICS ICS5342",
1119                .detect         = sst_detect_ics,
1120                .set_pll        = sst_set_pll_ics,
1121                .set_vidmod     = sst_set_vidmod_ics },
1122};
1123
1124static int sst_detect_dactype(struct fb_info *info, struct sstfb_par *par)
1125{
1126        int i, ret = 0;
1127
1128        for (i = 0; i < ARRAY_SIZE(dacs); i++) {
1129                ret = dacs[i].detect(info);
1130                if (ret)
1131                        break;
1132        }
1133        if (!ret)
1134                return 0;
1135        f_dprintk("%s found %s\n", __func__, dacs[i].name);
1136        par->dac_sw = dacs[i];
1137        return 1;
1138}
1139
1140/*
1141 * Internal Routines
1142 */
1143static int sst_init(struct fb_info *info, struct sstfb_par *par)
1144{
1145        u32 fbiinit0, fbiinit1, fbiinit4;
1146        struct pci_dev *dev = par->dev;
1147        struct pll_timing gfx_timings;
1148        struct sst_spec *spec;
1149        int Fout;
1150        int gfx_clock;
1151
1152        spec = &voodoo_spec[par->type];
1153        f_ddprintk(" fbiinit0   fbiinit1   fbiinit2   fbiinit3   fbiinit4  "
1154                   " fbiinit6\n");
1155        f_ddprintk("%0#10x %0#10x %0#10x %0#10x %0#10x %0#10x\n",
1156                    sst_read(FBIINIT0), sst_read(FBIINIT1), sst_read(FBIINIT2),
1157                    sst_read(FBIINIT3), sst_read(FBIINIT4), sst_read(FBIINIT6));
1158        /* disable video clock */
1159        pci_write_config_dword(dev, PCI_VCLK_DISABLE, 0);
1160
1161        /* enable writing to init registers, disable pci fifo */
1162        pci_write_config_dword(dev, PCI_INIT_ENABLE, PCI_EN_INIT_WR);
1163        /* reset video */
1164        sst_set_bits(FBIINIT1, VIDEO_RESET);
1165        sst_wait_idle();
1166        /* reset gfx + pci fifo */
1167        sst_set_bits(FBIINIT0, FBI_RESET | FIFO_RESET);
1168        sst_wait_idle();
1169
1170        /* unreset fifo */
1171        /*sst_unset_bits(FBIINIT0, FIFO_RESET);
1172        sst_wait_idle();*/
1173        /* unreset FBI */
1174        /*sst_unset_bits(FBIINIT0, FBI_RESET);
1175        sst_wait_idle();*/
1176
1177        /* disable dram refresh */
1178        sst_unset_bits(FBIINIT2, EN_DRAM_REFRESH);
1179        sst_wait_idle();
1180        /* remap fbinit2/3 to dac */
1181        pci_write_config_dword(dev, PCI_INIT_ENABLE,
1182                                PCI_EN_INIT_WR | PCI_REMAP_DAC );
1183        /* detect dac type */
1184        if (!sst_detect_dactype(info, par)) {
1185                printk(KERN_ERR "sstfb: unknown dac type.\n");
1186                //FIXME watch it: we are not in a safe state, bad bad bad.
1187                return 0;
1188        }
1189
1190        /* set graphic clock */
1191        gfx_clock = spec->default_gfx_clock;
1192        if ((gfxclk >10 ) && (gfxclk < spec->max_gfxclk)) {
1193                printk(KERN_INFO "sstfb: Using supplied graphic freq : %dMHz\n", gfxclk);
1194                 gfx_clock = gfxclk *1000;
1195        } else if (gfxclk) {
1196                printk(KERN_WARNING "sstfb: %dMhz is way out of spec! Using default\n", gfxclk);
1197        }
1198
1199        sst_calc_pll(gfx_clock, &Fout, &gfx_timings);
1200        par->dac_sw.set_pll(info, &gfx_timings, GFX_CLOCK);
1201
1202        /* disable fbiinit remap */
1203        pci_write_config_dword(dev, PCI_INIT_ENABLE,
1204                               PCI_EN_INIT_WR| PCI_EN_FIFO_WR );
1205        /* defaults init registers */
1206        /* FbiInit0: unreset gfx, unreset fifo */
1207        fbiinit0 = FBIINIT0_DEFAULT;
1208        fbiinit1 = FBIINIT1_DEFAULT;
1209        fbiinit4 = FBIINIT4_DEFAULT;
1210        par->vgapass = vgapass;
1211        if (par->vgapass)
1212                fbiinit0 &= ~DIS_VGA_PASSTHROUGH;
1213        else
1214                fbiinit0 |= DIS_VGA_PASSTHROUGH;
1215        if (slowpci) {
1216                fbiinit1 |= SLOW_PCI_WRITES;
1217                fbiinit4 |= SLOW_PCI_READS;
1218        } else {
1219                fbiinit1 &= ~SLOW_PCI_WRITES;
1220                fbiinit4 &= ~SLOW_PCI_READS;
1221        }
1222        sst_write(FBIINIT0, fbiinit0);
1223        sst_wait_idle();
1224        sst_write(FBIINIT1, fbiinit1);
1225        sst_wait_idle();
1226        sst_write(FBIINIT2, FBIINIT2_DEFAULT);
1227        sst_wait_idle();
1228        sst_write(FBIINIT3, FBIINIT3_DEFAULT);
1229        sst_wait_idle();
1230        sst_write(FBIINIT4, fbiinit4);
1231        sst_wait_idle();
1232        if (IS_VOODOO2(par)) {
1233                sst_write(FBIINIT6, FBIINIT6_DEFAULT);
1234                sst_wait_idle();
1235        }
1236
1237        pci_write_config_dword(dev, PCI_INIT_ENABLE, PCI_EN_FIFO_WR);
1238        pci_write_config_dword(dev, PCI_VCLK_ENABLE, 0);
1239        return 1;
1240}
1241
1242static void sst_shutdown(struct fb_info *info)
1243{
1244        struct sstfb_par *par = info->par;
1245        struct pci_dev *dev = par->dev;
1246        struct pll_timing gfx_timings;
1247        int Fout;
1248
1249        /* reset video, gfx, fifo, disable dram + remap fbiinit2/3 */
1250        pci_write_config_dword(dev, PCI_INIT_ENABLE, PCI_EN_INIT_WR);
1251        sst_set_bits(FBIINIT1, VIDEO_RESET | EN_BLANKING);
1252        sst_unset_bits(FBIINIT2, EN_DRAM_REFRESH);
1253        sst_set_bits(FBIINIT0, FBI_RESET | FIFO_RESET);
1254        sst_wait_idle();
1255        pci_write_config_dword(dev, PCI_INIT_ENABLE,
1256                               PCI_EN_INIT_WR | PCI_REMAP_DAC);
1257        /* set 20Mhz gfx clock */
1258        sst_calc_pll(20000, &Fout, &gfx_timings);
1259        par->dac_sw.set_pll(info, &gfx_timings, GFX_CLOCK);
1260        /* TODO maybe shutdown the dac, vrefresh and so on... */
1261        pci_write_config_dword(dev, PCI_INIT_ENABLE,
1262                               PCI_EN_INIT_WR);
1263        sst_unset_bits(FBIINIT0, FBI_RESET | FIFO_RESET | DIS_VGA_PASSTHROUGH);
1264        pci_write_config_dword(dev, PCI_VCLK_DISABLE,0);
1265        /* maybe keep fbiinit* and PCI_INIT_enable in the fb_info struct
1266         * from start ? */
1267        pci_write_config_dword(dev, PCI_INIT_ENABLE, 0);
1268
1269}
1270
1271/*
1272 * Interface to the world
1273 */
1274static int sstfb_setup(char *options)
1275{
1276        char *this_opt;
1277
1278        if (!options || !*options)
1279                return 0;
1280
1281        while ((this_opt = strsep(&options, ",")) != NULL) {
1282                if (!*this_opt) continue;
1283
1284                f_ddprintk("option %s\n", this_opt);
1285
1286                if (!strcmp(this_opt, "vganopass"))
1287                        vgapass = 0;
1288                else if (!strcmp(this_opt, "vgapass"))
1289                        vgapass = 1;
1290                else if (!strcmp(this_opt, "clipping"))
1291                        clipping = 1;
1292                else if (!strcmp(this_opt, "noclipping"))
1293                        clipping = 0;
1294                else if (!strcmp(this_opt, "fastpci"))
1295                        slowpci = 0;
1296                else if (!strcmp(this_opt, "slowpci"))
1297                        slowpci = 1;
1298                else if (!strncmp(this_opt, "mem:",4))
1299                        mem = simple_strtoul (this_opt+4, NULL, 0);
1300                else if (!strncmp(this_opt, "gfxclk:",7))
1301                        gfxclk = simple_strtoul (this_opt+7, NULL, 0);
1302                else
1303                        mode_option = this_opt;
1304        }
1305        return 0;
1306}
1307
1308
1309static struct fb_ops sstfb_ops = {
1310        .owner          = THIS_MODULE,
1311        .fb_check_var   = sstfb_check_var,
1312        .fb_set_par     = sstfb_set_par,
1313        .fb_setcolreg   = sstfb_setcolreg,
1314        .fb_fillrect    = cfb_fillrect, /* sstfb_fillrect */
1315        .fb_copyarea    = cfb_copyarea, /* sstfb_copyarea */
1316        .fb_imageblit   = cfb_imageblit,
1317        .fb_ioctl       = sstfb_ioctl,
1318};
1319
1320static int sstfb_probe(struct pci_dev *pdev, const struct pci_device_id *id)
1321{
1322        struct fb_info *info;
1323        struct fb_fix_screeninfo *fix;
1324        struct sstfb_par *par;
1325        struct sst_spec *spec;
1326        int err;
1327
1328        /* Enable device in PCI config. */
1329        if ((err=pci_enable_device(pdev))) {
1330                printk(KERN_ERR "cannot enable device\n");
1331                return err;
1332        }
1333
1334        /* Allocate the fb and par structures.  */
1335        info = framebuffer_alloc(sizeof(struct sstfb_par), &pdev->dev);
1336        if (!info)
1337                return -ENOMEM;
1338
1339        pci_set_drvdata(pdev, info);
1340        
1341        par  = info->par;
1342        fix  = &info->fix;
1343        
1344        par->type = id->driver_data;
1345        spec = &voodoo_spec[par->type];
1346        f_ddprintk("found device : %s\n", spec->name);
1347
1348        par->dev = pdev;
1349        par->revision = pdev->revision;
1350
1351        fix->mmio_start = pci_resource_start(pdev,0);
1352        fix->mmio_len   = 0x400000;
1353        fix->smem_start = fix->mmio_start + 0x400000;
1354
1355        if (!request_mem_region(fix->mmio_start, fix->mmio_len, "sstfb MMIO")) {
1356                printk(KERN_ERR "sstfb: cannot reserve mmio memory\n");
1357                goto fail_mmio_mem;
1358        }
1359
1360        if (!request_mem_region(fix->smem_start, 0x400000,"sstfb FB")) {
1361                printk(KERN_ERR "sstfb: cannot reserve fb memory\n");
1362                goto fail_fb_mem;
1363        }
1364
1365        par->mmio_vbase = ioremap_nocache(fix->mmio_start,
1366                                        fix->mmio_len);
1367        if (!par->mmio_vbase) {
1368                printk(KERN_ERR "sstfb: cannot remap register area %#lx\n",
1369                        fix->mmio_start);
1370                goto fail_mmio_remap;
1371        }
1372        info->screen_base = ioremap_nocache(fix->smem_start, 0x400000);
1373        if (!info->screen_base) {
1374                printk(KERN_ERR "sstfb: cannot remap framebuffer %#lx\n",
1375                        fix->smem_start);
1376                goto fail_fb_remap;
1377        }
1378
1379        if (!sst_init(info, par)) {
1380                printk(KERN_ERR "sstfb: Init failed\n");
1381                goto fail;
1382        }
1383        sst_get_memsize(info, &fix->smem_len);
1384        strlcpy(fix->id, spec->name, sizeof(fix->id));
1385
1386        printk(KERN_INFO "%s (revision %d) with %s dac\n",
1387                fix->id, par->revision, par->dac_sw.name);
1388        printk(KERN_INFO "framebuffer at %#lx, mapped to 0x%p, size %dMB\n",
1389                fix->smem_start, info->screen_base,
1390                fix->smem_len >> 20);
1391
1392        f_ddprintk("regbase_virt: %#lx\n", par->mmio_vbase);
1393        f_ddprintk("membase_phys: %#lx\n", fix->smem_start);
1394        f_ddprintk("fbbase_virt: %p\n", info->screen_base);
1395
1396        info->flags     = FBINFO_DEFAULT;
1397        info->fbops     = &sstfb_ops;
1398        info->pseudo_palette = par->palette;
1399
1400        fix->type       = FB_TYPE_PACKED_PIXELS;
1401        fix->visual     = FB_VISUAL_TRUECOLOR;
1402        fix->accel      = FB_ACCEL_NONE;  /* FIXME */
1403        /*
1404         * According to the specs, the linelength must be of 1024 *pixels*
1405         * and the 24bpp mode is in fact a 32 bpp mode (and both are in
1406         * fact dithered to 16bit).
1407         */
1408        fix->line_length = 2048; /* default value, for 24 or 32bit: 4096 */
1409        
1410        fb_find_mode(&info->var, info, mode_option, NULL, 0, NULL, 16);
1411
1412        if (sstfb_check_var(&info->var, info)) {
1413                printk(KERN_ERR "sstfb: invalid video mode.\n");
1414                goto fail;
1415        }
1416
1417        if (sstfb_set_par(info)) {
1418                printk(KERN_ERR "sstfb: can't set default video mode.\n");
1419                goto fail;
1420        }
1421        
1422        if (fb_alloc_cmap(&info->cmap, 256, 0)) {
1423                printk(KERN_ERR "sstfb: can't alloc cmap memory.\n");
1424                goto fail;
1425        }
1426
1427        /* register fb */
1428        info->device = &pdev->dev;
1429        if (register_framebuffer(info) < 0) {
1430                printk(KERN_ERR "sstfb: can't register framebuffer.\n");
1431                goto fail_register;
1432        }
1433
1434        sstfb_clear_screen(info);
1435
1436        if (device_create_file(info->dev, &device_attrs[0]))
1437                printk(KERN_WARNING "sstfb: can't create sysfs entry.\n");
1438
1439
1440        fb_info(info, "%s frame buffer device at 0x%p\n",
1441                fix->id, info->screen_base);
1442
1443        return 0;
1444
1445fail_register:
1446        fb_dealloc_cmap(&info->cmap);
1447fail:
1448        iounmap(info->screen_base);
1449fail_fb_remap:
1450        iounmap(par->mmio_vbase);
1451fail_mmio_remap:
1452        release_mem_region(fix->smem_start, 0x400000);
1453fail_fb_mem:
1454        release_mem_region(fix->mmio_start, info->fix.mmio_len);
1455fail_mmio_mem:
1456        framebuffer_release(info);
1457        return -ENXIO;  /* no voodoo detected */
1458}
1459
1460static void sstfb_remove(struct pci_dev *pdev)
1461{
1462        struct sstfb_par *par;
1463        struct fb_info *info;
1464
1465        info = pci_get_drvdata(pdev);
1466        par = info->par;
1467        
1468        device_remove_file(info->dev, &device_attrs[0]);
1469        sst_shutdown(info);
1470        iounmap(info->screen_base);
1471        iounmap(par->mmio_vbase);
1472        release_mem_region(info->fix.smem_start, 0x400000);
1473        release_mem_region(info->fix.mmio_start, info->fix.mmio_len);
1474        fb_dealloc_cmap(&info->cmap);
1475        unregister_framebuffer(info);
1476        framebuffer_release(info);
1477}
1478
1479
1480static const struct pci_device_id sstfb_id_tbl[] = {
1481        { PCI_DEVICE(PCI_VENDOR_ID_3DFX, PCI_DEVICE_ID_3DFX_VOODOO ),
1482                .driver_data = ID_VOODOO1, },
1483        { PCI_DEVICE(PCI_VENDOR_ID_3DFX, PCI_DEVICE_ID_3DFX_VOODOO2),
1484                .driver_data = ID_VOODOO2, },
1485        { 0 },
1486};
1487
1488static struct pci_driver sstfb_driver = {
1489        .name           = "sstfb",
1490        .id_table       = sstfb_id_tbl,
1491        .probe          = sstfb_probe,
1492        .remove         = sstfb_remove,
1493};
1494
1495
1496static int sstfb_init(void)
1497{
1498        char *option = NULL;
1499
1500        if (fb_get_options("sstfb", &option))
1501                return -ENODEV;
1502        sstfb_setup(option);
1503
1504        return pci_register_driver(&sstfb_driver);
1505}
1506
1507static void sstfb_exit(void)
1508{
1509        pci_unregister_driver(&sstfb_driver);
1510}
1511
1512
1513module_init(sstfb_init);
1514module_exit(sstfb_exit);
1515
1516MODULE_AUTHOR("(c) 2000,2002 Ghozlane Toumi <gtoumi@laposte.net>");
1517MODULE_DESCRIPTION("FBDev driver for 3dfx Voodoo Graphics and Voodoo2 based video boards");
1518MODULE_LICENSE("GPL");
1519
1520module_param(mem, int, 0);
1521MODULE_PARM_DESC(mem, "Size of frame buffer memory in MB (1, 2, 4 MB, default=autodetect)");
1522module_param(vgapass, bool, 0);
1523MODULE_PARM_DESC(vgapass, "Enable VGA PassThrough mode (0 or 1) (default=0)");
1524module_param(clipping, bool, 0);
1525MODULE_PARM_DESC(clipping, "Enable clipping (slower, safer) (0 or 1) (default=1)");
1526module_param(gfxclk, int, 0);
1527MODULE_PARM_DESC(gfxclk, "Force graphic chip frequency in MHz. DANGEROUS. (default=auto)");
1528module_param(slowpci, bool, 0);
1529MODULE_PARM_DESC(slowpci, "Uses slow PCI settings (0 or 1) (default=0)");
1530module_param(mode_option, charp, 0);
1531MODULE_PARM_DESC(mode_option, "Initial video mode (default=" DEFAULT_VIDEO_MODE ")");
1532
1533