1/* 2 * ipmi.h 3 * 4 * MontaVista IPMI interface 5 * 6 * Author: MontaVista Software, Inc. 7 * Corey Minyard <minyard@mvista.com> 8 * source@mvista.com 9 * 10 * Copyright 2002 MontaVista Software Inc. 11 * 12 * This program is free software; you can redistribute it and/or modify it 13 * under the terms of the GNU General Public License as published by the 14 * Free Software Foundation; either version 2 of the License, or (at your 15 * option) any later version. 16 * 17 * 18 * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED 19 * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF 20 * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. 21 * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, 22 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, 23 * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS 24 * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND 25 * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR 26 * TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE 27 * USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 28 * 29 * You should have received a copy of the GNU General Public License along 30 * with this program; if not, write to the Free Software Foundation, Inc., 31 * 675 Mass Ave, Cambridge, MA 02139, USA. 32 */ 33#ifndef __LINUX_IPMI_H 34#define __LINUX_IPMI_H 35 36#include <uapi/linux/ipmi.h> 37 38#include <linux/list.h> 39#include <linux/proc_fs.h> 40#include <linux/acpi.h> /* For acpi_handle */ 41 42struct module; 43struct device; 44 45/* Opaque type for a IPMI message user. One of these is needed to 46 send and receive messages. */ 47typedef struct ipmi_user *ipmi_user_t; 48 49/* 50 * Stuff coming from the receive interface comes as one of these. 51 * They are allocated, the receiver must free them with 52 * ipmi_free_recv_msg() when done with the message. The link is not 53 * used after the message is delivered, so the upper layer may use the 54 * link to build a linked list, if it likes. 55 */ 56struct ipmi_recv_msg { 57 struct list_head link; 58 59 /* The type of message as defined in the "Receive Types" 60 defines above. */ 61 int recv_type; 62 63 ipmi_user_t user; 64 struct ipmi_addr addr; 65 long msgid; 66 struct kernel_ipmi_msg msg; 67 68 /* The user_msg_data is the data supplied when a message was 69 sent, if this is a response to a sent message. If this is 70 not a response to a sent message, then user_msg_data will 71 be NULL. If the user above is NULL, then this will be the 72 intf. */ 73 void *user_msg_data; 74 75 /* Call this when done with the message. It will presumably free 76 the message and do any other necessary cleanup. */ 77 void (*done)(struct ipmi_recv_msg *msg); 78 79 /* Place-holder for the data, don't make any assumptions about 80 the size or existence of this, since it may change. */ 81 unsigned char msg_data[IPMI_MAX_MSG_LENGTH]; 82}; 83 84/* Allocate and free the receive message. */ 85void ipmi_free_recv_msg(struct ipmi_recv_msg *msg); 86 87struct ipmi_user_hndl { 88 /* Routine type to call when a message needs to be routed to 89 the upper layer. This will be called with some locks held, 90 the only IPMI routines that can be called are ipmi_request 91 and the alloc/free operations. The handler_data is the 92 variable supplied when the receive handler was registered. */ 93 void (*ipmi_recv_hndl)(struct ipmi_recv_msg *msg, 94 void *user_msg_data); 95 96 /* Called when the interface detects a watchdog pre-timeout. If 97 this is NULL, it will be ignored for the user. */ 98 void (*ipmi_watchdog_pretimeout)(void *handler_data); 99}; 100 101/* Create a new user of the IPMI layer on the given interface number. */ 102int ipmi_create_user(unsigned int if_num, 103 const struct ipmi_user_hndl *handler, 104 void *handler_data, 105 ipmi_user_t *user); 106 107/* Destroy the given user of the IPMI layer. Note that after this 108 function returns, the system is guaranteed to not call any 109 callbacks for the user. Thus as long as you destroy all the users 110 before you unload a module, you will be safe. And if you destroy 111 the users before you destroy the callback structures, it should be 112 safe, too. */ 113int ipmi_destroy_user(ipmi_user_t user); 114 115/* Get the IPMI version of the BMC we are talking to. */ 116void ipmi_get_version(ipmi_user_t user, 117 unsigned char *major, 118 unsigned char *minor); 119 120/* Set and get the slave address and LUN that we will use for our 121 source messages. Note that this affects the interface, not just 122 this user, so it will affect all users of this interface. This is 123 so some initialization code can come in and do the OEM-specific 124 things it takes to determine your address (if not the BMC) and set 125 it for everyone else. Note that each channel can have its own address. */ 126int ipmi_set_my_address(ipmi_user_t user, 127 unsigned int channel, 128 unsigned char address); 129int ipmi_get_my_address(ipmi_user_t user, 130 unsigned int channel, 131 unsigned char *address); 132int ipmi_set_my_LUN(ipmi_user_t user, 133 unsigned int channel, 134 unsigned char LUN); 135int ipmi_get_my_LUN(ipmi_user_t user, 136 unsigned int channel, 137 unsigned char *LUN); 138 139/* 140 * Like ipmi_request, but lets you specify the number of retries and 141 * the retry time. The retries is the number of times the message 142 * will be resent if no reply is received. If set to -1, the default 143 * value will be used. The retry time is the time in milliseconds 144 * between retries. If set to zero, the default value will be 145 * used. 146 * 147 * Don't use this unless you *really* have to. It's primarily for the 148 * IPMI over LAN converter; since the LAN stuff does its own retries, 149 * it makes no sense to do it here. However, this can be used if you 150 * have unusual requirements. 151 */ 152int ipmi_request_settime(ipmi_user_t user, 153 struct ipmi_addr *addr, 154 long msgid, 155 struct kernel_ipmi_msg *msg, 156 void *user_msg_data, 157 int priority, 158 int max_retries, 159 unsigned int retry_time_ms); 160 161/* 162 * Like ipmi_request, but with messages supplied. This will not 163 * allocate any memory, and the messages may be statically allocated 164 * (just make sure to do the "done" handling on them). Note that this 165 * is primarily for the watchdog timer, since it should be able to 166 * send messages even if no memory is available. This is subject to 167 * change as the system changes, so don't use it unless you REALLY 168 * have to. 169 */ 170int ipmi_request_supply_msgs(ipmi_user_t user, 171 struct ipmi_addr *addr, 172 long msgid, 173 struct kernel_ipmi_msg *msg, 174 void *user_msg_data, 175 void *supplied_smi, 176 struct ipmi_recv_msg *supplied_recv, 177 int priority); 178 179/* 180 * Poll the IPMI interface for the user. This causes the IPMI code to 181 * do an immediate check for information from the driver and handle 182 * anything that is immediately pending. This will not block in any 183 * way. This is useful if you need to spin waiting for something to 184 * happen in the IPMI driver. 185 */ 186void ipmi_poll_interface(ipmi_user_t user); 187 188/* 189 * When commands come in to the SMS, the user can register to receive 190 * them. Only one user can be listening on a specific netfn/cmd/chan tuple 191 * at a time, you will get an EBUSY error if the command is already 192 * registered. If a command is received that does not have a user 193 * registered, the driver will automatically return the proper 194 * error. Channels are specified as a bitfield, use IPMI_CHAN_ALL to 195 * mean all channels. 196 */ 197int ipmi_register_for_cmd(ipmi_user_t user, 198 unsigned char netfn, 199 unsigned char cmd, 200 unsigned int chans); 201int ipmi_unregister_for_cmd(ipmi_user_t user, 202 unsigned char netfn, 203 unsigned char cmd, 204 unsigned int chans); 205 206/* 207 * Go into a mode where the driver will not autonomously attempt to do 208 * things with the interface. It will still respond to attentions and 209 * interrupts, and it will expect that commands will complete. It 210 * will not automatcially check for flags, events, or things of that 211 * nature. 212 * 213 * This is primarily used for firmware upgrades. The idea is that 214 * when you go into firmware upgrade mode, you do this operation 215 * and the driver will not attempt to do anything but what you tell 216 * it or what the BMC asks for. 217 * 218 * Note that if you send a command that resets the BMC, the driver 219 * will still expect a response from that command. So the BMC should 220 * reset itself *after* the response is sent. Resetting before the 221 * response is just silly. 222 * 223 * If in auto maintenance mode, the driver will automatically go into 224 * maintenance mode for 30 seconds if it sees a cold reset, a warm 225 * reset, or a firmware NetFN. This means that code that uses only 226 * firmware NetFN commands to do upgrades will work automatically 227 * without change, assuming it sends a message every 30 seconds or 228 * less. 229 * 230 * See the IPMI_MAINTENANCE_MODE_xxx defines for what the mode means. 231 */ 232int ipmi_get_maintenance_mode(ipmi_user_t user); 233int ipmi_set_maintenance_mode(ipmi_user_t user, int mode); 234 235/* 236 * When the user is created, it will not receive IPMI events by 237 * default. The user must set this to TRUE to get incoming events. 238 * The first user that sets this to TRUE will receive all events that 239 * have been queued while no one was waiting for events. 240 */ 241int ipmi_set_gets_events(ipmi_user_t user, bool val); 242 243/* 244 * Called when a new SMI is registered. This will also be called on 245 * every existing interface when a new watcher is registered with 246 * ipmi_smi_watcher_register(). 247 */ 248struct ipmi_smi_watcher { 249 struct list_head link; 250 251 /* You must set the owner to the current module, if you are in 252 a module (generally just set it to "THIS_MODULE"). */ 253 struct module *owner; 254 255 /* These two are called with read locks held for the interface 256 the watcher list. So you can add and remove users from the 257 IPMI interface, send messages, etc., but you cannot add 258 or remove SMI watchers or SMI interfaces. */ 259 void (*new_smi)(int if_num, struct device *dev); 260 void (*smi_gone)(int if_num); 261}; 262 263int ipmi_smi_watcher_register(struct ipmi_smi_watcher *watcher); 264int ipmi_smi_watcher_unregister(struct ipmi_smi_watcher *watcher); 265 266/* The following are various helper functions for dealing with IPMI 267 addresses. */ 268 269/* Return the maximum length of an IPMI address given it's type. */ 270unsigned int ipmi_addr_length(int addr_type); 271 272/* Validate that the given IPMI address is valid. */ 273int ipmi_validate_addr(struct ipmi_addr *addr, int len); 274 275/* 276 * How did the IPMI driver find out about the device? 277 */ 278enum ipmi_addr_src { 279 SI_INVALID = 0, SI_HOTMOD, SI_HARDCODED, SI_SPMI, SI_ACPI, SI_SMBIOS, 280 SI_PCI, SI_DEVICETREE, SI_LAST 281}; 282const char *ipmi_addr_src_to_str(enum ipmi_addr_src src); 283 284union ipmi_smi_info_union { 285#ifdef CONFIG_ACPI 286 /* 287 * the acpi_info element is defined for the SI_ACPI 288 * address type 289 */ 290 struct { 291 acpi_handle acpi_handle; 292 } acpi_info; 293#endif 294}; 295 296struct ipmi_smi_info { 297 enum ipmi_addr_src addr_src; 298 299 /* 300 * Base device for the interface. Don't forget to put this when 301 * you are done. 302 */ 303 struct device *dev; 304 305 /* 306 * The addr_info provides more detailed info for some IPMI 307 * devices, depending on the addr_src. Currently only SI_ACPI 308 * info is provided. 309 */ 310 union ipmi_smi_info_union addr_info; 311}; 312 313/* This is to get the private info of ipmi_smi_t */ 314extern int ipmi_get_smi_info(int if_num, struct ipmi_smi_info *data); 315 316#endif /* __LINUX_IPMI_H */ 317