1/* SPDX-License-Identifier: GPL-2.0 */ 2#ifndef __ASM_PARISC_PCI_H 3#define __ASM_PARISC_PCI_H 4 5#include <linux/scatterlist.h> 6 7 8 9/* 10** HP PCI platforms generally support multiple bus adapters. 11** (workstations 1-~4, servers 2-~32) 12** 13** Newer platforms number the busses across PCI bus adapters *sparsely*. 14** E.g. 0, 8, 16, ... 15** 16** Under a PCI bus, most HP platforms support PPBs up to two or three 17** levels deep. See "Bit3" product line. 18*/ 19#define PCI_MAX_BUSSES 256 20 21 22/* To be used as: mdelay(pci_post_reset_delay); 23 * 24 * post_reset is the time the kernel should stall to prevent anyone from 25 * accessing the PCI bus once #RESET is de-asserted. 26 * PCI spec somewhere says 1 second but with multi-PCI bus systems, 27 * this makes the boot time much longer than necessary. 28 * 20ms seems to work for all the HP PCI implementations to date. 29 */ 30#define pci_post_reset_delay 50 31 32 33/* 34** pci_hba_data (aka H2P_OBJECT in HP/UX) 35** 36** This is the "common" or "base" data structure which HBA drivers 37** (eg Dino or LBA) are required to place at the top of their own 38** platform_data structure. I've heard this called "C inheritance" too. 39** 40** Data needed by pcibios layer belongs here. 41*/ 42struct pci_hba_data { 43 void __iomem *base_addr; /* aka Host Physical Address */ 44 const struct parisc_device *dev; /* device from PA bus walk */ 45 struct pci_bus *hba_bus; /* primary PCI bus below HBA */ 46 int hba_num; /* I/O port space access "key" */ 47 struct resource bus_num; /* PCI bus numbers */ 48 struct resource io_space; /* PIOP */ 49 struct resource lmmio_space; /* bus addresses < 4Gb */ 50 struct resource elmmio_space; /* additional bus addresses < 4Gb */ 51 struct resource gmmio_space; /* bus addresses > 4Gb */ 52 53 /* NOTE: Dino code assumes it can use *all* of the lmmio_space, 54 * elmmio_space and gmmio_space as a contiguous array of 55 * resources. This #define represents the array size */ 56 #define DINO_MAX_LMMIO_RESOURCES 3 57 58 unsigned long lmmio_space_offset; /* CPU view - PCI view */ 59 void * iommu; /* IOMMU this device is under */ 60 /* REVISIT - spinlock to protect resources? */ 61 62 #define HBA_NAME_SIZE 16 63 char io_name[HBA_NAME_SIZE]; 64 char lmmio_name[HBA_NAME_SIZE]; 65 char elmmio_name[HBA_NAME_SIZE]; 66 char gmmio_name[HBA_NAME_SIZE]; 67}; 68 69#define HBA_DATA(d) ((struct pci_hba_data *) (d)) 70 71/* 72** We support 2^16 I/O ports per HBA. These are set up in the form 73** 0xbbxxxx, where bb is the bus number and xxxx is the I/O port 74** space address. 75*/ 76#define HBA_PORT_SPACE_BITS 16 77 78#define HBA_PORT_BASE(h) ((h) << HBA_PORT_SPACE_BITS) 79#define HBA_PORT_SPACE_SIZE (1UL << HBA_PORT_SPACE_BITS) 80 81#define PCI_PORT_HBA(a) ((a) >> HBA_PORT_SPACE_BITS) 82#define PCI_PORT_ADDR(a) ((a) & (HBA_PORT_SPACE_SIZE - 1)) 83 84#ifdef CONFIG_64BIT 85#define PCI_F_EXTEND 0xffffffff00000000UL 86#else /* !CONFIG_64BIT */ 87#define PCI_F_EXTEND 0UL 88#endif /* !CONFIG_64BIT */ 89 90/* 91** Most PCI devices (eg Tulip, NCR720) also export the same registers 92** to both MMIO and I/O port space. Due to poor performance of I/O Port 93** access under HP PCI bus adapters, strongly recommend the use of MMIO 94** address space. 95** 96** While I'm at it more PA programming notes: 97** 98** 1) MMIO stores (writes) are posted operations. This means the processor 99** gets an "ACK" before the write actually gets to the device. A read 100** to the same device (or typically the bus adapter above it) will 101** force in-flight write transaction(s) out to the targeted device 102** before the read can complete. 103** 104** 2) The Programmed I/O (PIO) data may not always be strongly ordered with 105** respect to DMA on all platforms. Ie PIO data can reach the processor 106** before in-flight DMA reaches memory. Since most SMP PA platforms 107** are I/O coherent, it generally doesn't matter...but sometimes 108** it does. 109** 110** I've helped device driver writers debug both types of problems. 111*/ 112struct pci_port_ops { 113 u8 (*inb) (struct pci_hba_data *hba, u16 port); 114 u16 (*inw) (struct pci_hba_data *hba, u16 port); 115 u32 (*inl) (struct pci_hba_data *hba, u16 port); 116 void (*outb) (struct pci_hba_data *hba, u16 port, u8 data); 117 void (*outw) (struct pci_hba_data *hba, u16 port, u16 data); 118 void (*outl) (struct pci_hba_data *hba, u16 port, u32 data); 119}; 120 121 122struct pci_bios_ops { 123 void (*init)(void); 124 void (*fixup_bus)(struct pci_bus *bus); 125}; 126 127/* 128** Stuff declared in arch/parisc/kernel/pci.c 129*/ 130extern struct pci_port_ops *pci_port; 131extern struct pci_bios_ops *pci_bios; 132 133#ifdef CONFIG_PCI 134extern void pcibios_register_hba(struct pci_hba_data *); 135#else 136static inline void pcibios_register_hba(struct pci_hba_data *x) 137{ 138} 139#endif 140extern void pcibios_init_bridge(struct pci_dev *); 141 142/* 143 * pcibios_assign_all_busses() is used in drivers/pci/pci.c:pci_do_scan_bus() 144 * 0 == check if bridge is numbered before re-numbering. 145 * 1 == pci_do_scan_bus() should automatically number all PCI-PCI bridges. 146 * 147 * We *should* set this to zero for "legacy" platforms and one 148 * for PAT platforms. 149 * 150 * But legacy platforms also need to renumber the busses below a Host 151 * Bus controller. Adding a 4-port Tulip card on the first PCI root 152 * bus of a C200 resulted in the secondary bus being numbered as 1. 153 * The second PCI host bus controller's root bus had already been 154 * assigned bus number 1 by firmware and sysfs complained. 155 * 156 * Firmware isn't doing anything wrong here since each controller 157 * is its own PCI domain. It's simpler and easier for us to renumber 158 * the busses rather than treat each Dino as a separate PCI domain. 159 * Eventually, we may want to introduce PCI domains for Superdome or 160 * rp7420/8420 boxes and then revisit this issue. 161 */ 162#define pcibios_assign_all_busses() (1) 163 164#define PCIBIOS_MIN_IO 0x10 165#define PCIBIOS_MIN_MEM 0x1000 /* NBPG - but pci/setup-res.c dies */ 166 167static inline int pci_get_legacy_ide_irq(struct pci_dev *dev, int channel) 168{ 169 return channel ? 15 : 14; 170} 171 172#define HAVE_PCI_MMAP 173#define ARCH_GENERIC_PCI_MMAP_RESOURCE 174 175#endif /* __ASM_PARISC_PCI_H */ 176