linux/drivers/atm/solos-pci.c
<<
>>
Prefs
   1/*
   2 * Driver for the Solos PCI ADSL2+ card, designed to support Linux by
   3 *  Traverse Technologies -- http://www.traverse.com.au/
   4 *  Xrio Limited          -- http://www.xrio.com/
   5 *
   6 *
   7 * Copyright © 2008 Traverse Technologies
   8 * Copyright © 2008 Intel Corporation
   9 *
  10 * Authors: Nathan Williams <nathan@traverse.com.au>
  11 *          David Woodhouse <dwmw2@infradead.org>
  12 *          Treker Chen <treker@xrio.com>
  13 *
  14 * This program is free software; you can redistribute it and/or
  15 * modify it under the terms of the GNU General Public License
  16 * version 2, as published by the Free Software Foundation.
  17 *
  18 * This program is distributed in the hope that it will be useful,
  19 * but WITHOUT ANY WARRANTY; without even the implied warranty of
  20 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  21 * GNU General Public License for more details.
  22 */
  23
  24#define DEBUG
  25#define VERBOSE_DEBUG
  26
  27#include <linux/interrupt.h>
  28#include <linux/module.h>
  29#include <linux/kernel.h>
  30#include <linux/errno.h>
  31#include <linux/ioport.h>
  32#include <linux/types.h>
  33#include <linux/pci.h>
  34#include <linux/atm.h>
  35#include <linux/atmdev.h>
  36#include <linux/skbuff.h>
  37#include <linux/sysfs.h>
  38#include <linux/device.h>
  39#include <linux/kobject.h>
  40#include <linux/firmware.h>
  41#include <linux/ctype.h>
  42#include <linux/swab.h>
  43#include <linux/slab.h>
  44
  45#define VERSION "1.04"
  46#define DRIVER_VERSION 0x01
  47#define PTAG "solos-pci"
  48
  49#define CONFIG_RAM_SIZE 128
  50#define FLAGS_ADDR      0x7C
  51#define IRQ_EN_ADDR     0x78
  52#define FPGA_VER        0x74
  53#define IRQ_CLEAR       0x70
  54#define WRITE_FLASH     0x6C
  55#define PORTS           0x68
  56#define FLASH_BLOCK     0x64
  57#define FLASH_BUSY      0x60
  58#define FPGA_MODE       0x5C
  59#define FLASH_MODE      0x58
  60#define GPIO_STATUS     0x54
  61#define DRIVER_VER      0x50
  62#define TX_DMA_ADDR(port)       (0x40 + (4 * (port)))
  63#define RX_DMA_ADDR(port)       (0x30 + (4 * (port)))
  64
  65#define DATA_RAM_SIZE   32768
  66#define BUF_SIZE        2048
  67#define OLD_BUF_SIZE    4096 /* For FPGA versions <= 2*/
  68/* Old boards use ATMEL AD45DB161D flash */
  69#define ATMEL_FPGA_PAGE 528 /* FPGA flash page size*/
  70#define ATMEL_SOLOS_PAGE        512 /* Solos flash page size*/
  71#define ATMEL_FPGA_BLOCK        (ATMEL_FPGA_PAGE * 8) /* FPGA block size*/
  72#define ATMEL_SOLOS_BLOCK       (ATMEL_SOLOS_PAGE * 8) /* Solos block size*/
  73/* Current boards use M25P/M25PE SPI flash */
  74#define SPI_FLASH_BLOCK (256 * 64)
  75
  76#define RX_BUF(card, nr) ((card->buffers) + (nr)*(card->buffer_size)*2)
  77#define TX_BUF(card, nr) ((card->buffers) + (nr)*(card->buffer_size)*2 + (card->buffer_size))
  78#define FLASH_BUF ((card->buffers) + 4*(card->buffer_size)*2)
  79
  80#define RX_DMA_SIZE     2048
  81
  82#define FPGA_VERSION(a,b) (((a) << 8) + (b))
  83#define LEGACY_BUFFERS  2
  84#define DMA_SUPPORTED   4
  85
  86static int reset = 0;
  87static int atmdebug = 0;
  88static int firmware_upgrade = 0;
  89static int fpga_upgrade = 0;
  90static int db_firmware_upgrade = 0;
  91static int db_fpga_upgrade = 0;
  92
  93struct pkt_hdr {
  94        __le16 size;
  95        __le16 vpi;
  96        __le16 vci;
  97        __le16 type;
  98};
  99
 100struct solos_skb_cb {
 101        struct atm_vcc *vcc;
 102        uint32_t dma_addr;
 103};
 104
 105
 106#define SKB_CB(skb)             ((struct solos_skb_cb *)skb->cb)
 107
 108#define PKT_DATA        0
 109#define PKT_COMMAND     1
 110#define PKT_POPEN       3
 111#define PKT_PCLOSE      4
 112#define PKT_STATUS      5
 113
 114struct solos_card {
 115        void __iomem *config_regs;
 116        void __iomem *buffers;
 117        int nr_ports;
 118        int tx_mask;
 119        struct pci_dev *dev;
 120        struct atm_dev *atmdev[4];
 121        struct tasklet_struct tlet;
 122        spinlock_t tx_lock;
 123        spinlock_t tx_queue_lock;
 124        spinlock_t cli_queue_lock;
 125        spinlock_t param_queue_lock;
 126        struct list_head param_queue;
 127        struct sk_buff_head tx_queue[4];
 128        struct sk_buff_head cli_queue[4];
 129        struct sk_buff *tx_skb[4];
 130        struct sk_buff *rx_skb[4];
 131        unsigned char *dma_bounce;
 132        wait_queue_head_t param_wq;
 133        wait_queue_head_t fw_wq;
 134        int using_dma;
 135        int dma_alignment;
 136        int fpga_version;
 137        int buffer_size;
 138        int atmel_flash;
 139};
 140
 141
 142struct solos_param {
 143        struct list_head list;
 144        pid_t pid;
 145        int port;
 146        struct sk_buff *response;
 147};
 148
 149#define SOLOS_CHAN(atmdev) ((int)(unsigned long)(atmdev)->phy_data)
 150
 151MODULE_AUTHOR("Traverse Technologies <support@traverse.com.au>");
 152MODULE_DESCRIPTION("Solos PCI driver");
 153MODULE_VERSION(VERSION);
 154MODULE_LICENSE("GPL");
 155MODULE_FIRMWARE("solos-FPGA.bin");
 156MODULE_FIRMWARE("solos-Firmware.bin");
 157MODULE_FIRMWARE("solos-db-FPGA.bin");
 158MODULE_PARM_DESC(reset, "Reset Solos chips on startup");
 159MODULE_PARM_DESC(atmdebug, "Print ATM data");
 160MODULE_PARM_DESC(firmware_upgrade, "Initiate Solos firmware upgrade");
 161MODULE_PARM_DESC(fpga_upgrade, "Initiate FPGA upgrade");
 162MODULE_PARM_DESC(db_firmware_upgrade, "Initiate daughter board Solos firmware upgrade");
 163MODULE_PARM_DESC(db_fpga_upgrade, "Initiate daughter board FPGA upgrade");
 164module_param(reset, int, 0444);
 165module_param(atmdebug, int, 0644);
 166module_param(firmware_upgrade, int, 0444);
 167module_param(fpga_upgrade, int, 0444);
 168module_param(db_firmware_upgrade, int, 0444);
 169module_param(db_fpga_upgrade, int, 0444);
 170
 171static void fpga_queue(struct solos_card *card, int port, struct sk_buff *skb,
 172                       struct atm_vcc *vcc);
 173static uint32_t fpga_tx(struct solos_card *);
 174static irqreturn_t solos_irq(int irq, void *dev_id);
 175static struct atm_vcc* find_vcc(struct atm_dev *dev, short vpi, int vci);
 176static int atm_init(struct solos_card *, struct device *);
 177static void atm_remove(struct solos_card *);
 178static int send_command(struct solos_card *card, int dev, const char *buf, size_t size);
 179static void solos_bh(unsigned long);
 180static int print_buffer(struct sk_buff *buf);
 181
 182static inline void solos_pop(struct atm_vcc *vcc, struct sk_buff *skb)
 183{
 184        if (vcc->pop)
 185                vcc->pop(vcc, skb);
 186        else
 187                dev_kfree_skb_any(skb);
 188}
 189
 190static ssize_t solos_param_show(struct device *dev, struct device_attribute *attr,
 191                                char *buf)
 192{
 193        struct atm_dev *atmdev = container_of(dev, struct atm_dev, class_dev);
 194        struct solos_card *card = atmdev->dev_data;
 195        struct solos_param prm;
 196        struct sk_buff *skb;
 197        struct pkt_hdr *header;
 198        int buflen;
 199
 200        buflen = strlen(attr->attr.name) + 10;
 201
 202        skb = alloc_skb(sizeof(*header) + buflen, GFP_KERNEL);
 203        if (!skb) {
 204                dev_warn(&card->dev->dev, "Failed to allocate sk_buff in solos_param_show()\n");
 205                return -ENOMEM;
 206        }
 207
 208        header = skb_put(skb, sizeof(*header));
 209
 210        buflen = snprintf((void *)&header[1], buflen - 1,
 211                          "L%05d\n%s\n", current->pid, attr->attr.name);
 212        skb_put(skb, buflen);
 213
 214        header->size = cpu_to_le16(buflen);
 215        header->vpi = cpu_to_le16(0);
 216        header->vci = cpu_to_le16(0);
 217        header->type = cpu_to_le16(PKT_COMMAND);
 218
 219        prm.pid = current->pid;
 220        prm.response = NULL;
 221        prm.port = SOLOS_CHAN(atmdev);
 222
 223        spin_lock_irq(&card->param_queue_lock);
 224        list_add(&prm.list, &card->param_queue);
 225        spin_unlock_irq(&card->param_queue_lock);
 226
 227        fpga_queue(card, prm.port, skb, NULL);
 228
 229        wait_event_timeout(card->param_wq, prm.response, 5 * HZ);
 230
 231        spin_lock_irq(&card->param_queue_lock);
 232        list_del(&prm.list);
 233        spin_unlock_irq(&card->param_queue_lock);
 234
 235        if (!prm.response)
 236                return -EIO;
 237
 238        buflen = prm.response->len;
 239        memcpy(buf, prm.response->data, buflen);
 240        kfree_skb(prm.response);
 241
 242        return buflen;
 243}
 244
 245static ssize_t solos_param_store(struct device *dev, struct device_attribute *attr,
 246                                 const char *buf, size_t count)
 247{
 248        struct atm_dev *atmdev = container_of(dev, struct atm_dev, class_dev);
 249        struct solos_card *card = atmdev->dev_data;
 250        struct solos_param prm;
 251        struct sk_buff *skb;
 252        struct pkt_hdr *header;
 253        int buflen;
 254        ssize_t ret;
 255
 256        buflen = strlen(attr->attr.name) + 11 + count;
 257
 258        skb = alloc_skb(sizeof(*header) + buflen, GFP_KERNEL);
 259        if (!skb) {
 260                dev_warn(&card->dev->dev, "Failed to allocate sk_buff in solos_param_store()\n");
 261                return -ENOMEM;
 262        }
 263
 264        header = skb_put(skb, sizeof(*header));
 265
 266        buflen = snprintf((void *)&header[1], buflen - 1,
 267                          "L%05d\n%s\n%s\n", current->pid, attr->attr.name, buf);
 268
 269        skb_put(skb, buflen);
 270        header->size = cpu_to_le16(buflen);
 271        header->vpi = cpu_to_le16(0);
 272        header->vci = cpu_to_le16(0);
 273        header->type = cpu_to_le16(PKT_COMMAND);
 274
 275        prm.pid = current->pid;
 276        prm.response = NULL;
 277        prm.port = SOLOS_CHAN(atmdev);
 278
 279        spin_lock_irq(&card->param_queue_lock);
 280        list_add(&prm.list, &card->param_queue);
 281        spin_unlock_irq(&card->param_queue_lock);
 282
 283        fpga_queue(card, prm.port, skb, NULL);
 284
 285        wait_event_timeout(card->param_wq, prm.response, 5 * HZ);
 286
 287        spin_lock_irq(&card->param_queue_lock);
 288        list_del(&prm.list);
 289        spin_unlock_irq(&card->param_queue_lock);
 290
 291        skb = prm.response;
 292
 293        if (!skb)
 294                return -EIO;
 295
 296        buflen = skb->len;
 297
 298        /* Sometimes it has a newline, sometimes it doesn't. */
 299        if (skb->data[buflen - 1] == '\n')
 300                buflen--;
 301
 302        if (buflen == 2 && !strncmp(skb->data, "OK", 2))
 303                ret = count;
 304        else if (buflen == 5 && !strncmp(skb->data, "ERROR", 5))
 305                ret = -EIO;
 306        else {
 307                /* We know we have enough space allocated for this; we allocated 
 308                   it ourselves */
 309                skb->data[buflen] = 0;
 310        
 311                dev_warn(&card->dev->dev, "Unexpected parameter response: '%s'\n",
 312                         skb->data);
 313                ret = -EIO;
 314        }
 315        kfree_skb(skb);
 316
 317        return ret;
 318}
 319
 320static char *next_string(struct sk_buff *skb)
 321{
 322        int i = 0;
 323        char *this = skb->data;
 324        
 325        for (i = 0; i < skb->len; i++) {
 326                if (this[i] == '\n') {
 327                        this[i] = 0;
 328                        skb_pull(skb, i + 1);
 329                        return this;
 330                }
 331                if (!isprint(this[i]))
 332                        return NULL;
 333        }
 334        return NULL;
 335}
 336
 337/*
 338 * Status packet has fields separated by \n, starting with a version number
 339 * for the information therein. Fields are....
 340 *
 341 *     packet version
 342 *     RxBitRate        (version >= 1)
 343 *     TxBitRate        (version >= 1)
 344 *     State            (version >= 1)
 345 *     LocalSNRMargin   (version >= 1)
 346 *     LocalLineAttn    (version >= 1)
 347 */       
 348static int process_status(struct solos_card *card, int port, struct sk_buff *skb)
 349{
 350        char *str, *state_str, *snr, *attn;
 351        int ver, rate_up, rate_down, err;
 352
 353        if (!card->atmdev[port])
 354                return -ENODEV;
 355
 356        str = next_string(skb);
 357        if (!str)
 358                return -EIO;
 359
 360        err = kstrtoint(str, 10, &ver);
 361        if (err) {
 362                dev_warn(&card->dev->dev, "Unexpected status interrupt version\n");
 363                return err;
 364        }
 365        if (ver < 1) {
 366                dev_warn(&card->dev->dev, "Unexpected status interrupt version %d\n",
 367                         ver);
 368                return -EIO;
 369        }
 370
 371        str = next_string(skb);
 372        if (!str)
 373                return -EIO;
 374        if (!strcmp(str, "ERROR")) {
 375                dev_dbg(&card->dev->dev, "Status packet indicated Solos error on port %d (starting up?)\n",
 376                         port);
 377                return 0;
 378        }
 379
 380        err = kstrtoint(str, 10, &rate_down);
 381        if (err)
 382                return err;
 383
 384        str = next_string(skb);
 385        if (!str)
 386                return -EIO;
 387        err = kstrtoint(str, 10, &rate_up);
 388        if (err)
 389                return err;
 390
 391        state_str = next_string(skb);
 392        if (!state_str)
 393                return -EIO;
 394
 395        /* Anything but 'Showtime' is down */
 396        if (strcmp(state_str, "Showtime")) {
 397                atm_dev_signal_change(card->atmdev[port], ATM_PHY_SIG_LOST);
 398                dev_info(&card->dev->dev, "Port %d: %s\n", port, state_str);
 399                return 0;
 400        }
 401
 402        snr = next_string(skb);
 403        if (!snr)
 404                return -EIO;
 405        attn = next_string(skb);
 406        if (!attn)
 407                return -EIO;
 408
 409        dev_info(&card->dev->dev, "Port %d: %s @%d/%d kb/s%s%s%s%s\n",
 410                 port, state_str, rate_down/1000, rate_up/1000,
 411                 snr[0]?", SNR ":"", snr, attn[0]?", Attn ":"", attn);
 412        
 413        card->atmdev[port]->link_rate = rate_down / 424;
 414        atm_dev_signal_change(card->atmdev[port], ATM_PHY_SIG_FOUND);
 415
 416        return 0;
 417}
 418
 419static int process_command(struct solos_card *card, int port, struct sk_buff *skb)
 420{
 421        struct solos_param *prm;
 422        unsigned long flags;
 423        int cmdpid;
 424        int found = 0, err;
 425
 426        if (skb->len < 7)
 427                return 0;
 428
 429        if (skb->data[0] != 'L'    || !isdigit(skb->data[1]) ||
 430            !isdigit(skb->data[2]) || !isdigit(skb->data[3]) ||
 431            !isdigit(skb->data[4]) || !isdigit(skb->data[5]) ||
 432            skb->data[6] != '\n')
 433                return 0;
 434
 435        err = kstrtoint(&skb->data[1], 10, &cmdpid);
 436        if (err)
 437                return err;
 438
 439        spin_lock_irqsave(&card->param_queue_lock, flags);
 440        list_for_each_entry(prm, &card->param_queue, list) {
 441                if (prm->port == port && prm->pid == cmdpid) {
 442                        prm->response = skb;
 443                        skb_pull(skb, 7);
 444                        wake_up(&card->param_wq);
 445                        found = 1;
 446                        break;
 447                }
 448        }
 449        spin_unlock_irqrestore(&card->param_queue_lock, flags);
 450        return found;
 451}
 452
 453static ssize_t console_show(struct device *dev, struct device_attribute *attr,
 454                            char *buf)
 455{
 456        struct atm_dev *atmdev = container_of(dev, struct atm_dev, class_dev);
 457        struct solos_card *card = atmdev->dev_data;
 458        struct sk_buff *skb;
 459        unsigned int len;
 460
 461        spin_lock(&card->cli_queue_lock);
 462        skb = skb_dequeue(&card->cli_queue[SOLOS_CHAN(atmdev)]);
 463        spin_unlock(&card->cli_queue_lock);
 464        if(skb == NULL)
 465                return sprintf(buf, "No data.\n");
 466
 467        len = skb->len;
 468        memcpy(buf, skb->data, len);
 469
 470        kfree_skb(skb);
 471        return len;
 472}
 473
 474static int send_command(struct solos_card *card, int dev, const char *buf, size_t size)
 475{
 476        struct sk_buff *skb;
 477        struct pkt_hdr *header;
 478
 479        if (size > (BUF_SIZE - sizeof(*header))) {
 480                dev_dbg(&card->dev->dev, "Command is too big.  Dropping request\n");
 481                return 0;
 482        }
 483        skb = alloc_skb(size + sizeof(*header), GFP_ATOMIC);
 484        if (!skb) {
 485                dev_warn(&card->dev->dev, "Failed to allocate sk_buff in send_command()\n");
 486                return 0;
 487        }
 488
 489        header = skb_put(skb, sizeof(*header));
 490
 491        header->size = cpu_to_le16(size);
 492        header->vpi = cpu_to_le16(0);
 493        header->vci = cpu_to_le16(0);
 494        header->type = cpu_to_le16(PKT_COMMAND);
 495
 496        skb_put_data(skb, buf, size);
 497
 498        fpga_queue(card, dev, skb, NULL);
 499
 500        return 0;
 501}
 502
 503static ssize_t console_store(struct device *dev, struct device_attribute *attr,
 504                             const char *buf, size_t count)
 505{
 506        struct atm_dev *atmdev = container_of(dev, struct atm_dev, class_dev);
 507        struct solos_card *card = atmdev->dev_data;
 508        int err;
 509
 510        err = send_command(card, SOLOS_CHAN(atmdev), buf, count);
 511
 512        return err?:count;
 513}
 514
 515struct geos_gpio_attr {
 516        struct device_attribute attr;
 517        int offset;
 518};
 519
 520#define SOLOS_GPIO_ATTR(_name, _mode, _show, _store, _offset)   \
 521        struct geos_gpio_attr gpio_attr_##_name = {             \
 522                .attr = __ATTR(_name, _mode, _show, _store),    \
 523                .offset = _offset }
 524
 525static ssize_t geos_gpio_store(struct device *dev, struct device_attribute *attr,
 526                               const char *buf, size_t count)
 527{
 528        struct pci_dev *pdev = to_pci_dev(dev);
 529        struct geos_gpio_attr *gattr = container_of(attr, struct geos_gpio_attr, attr);
 530        struct solos_card *card = pci_get_drvdata(pdev);
 531        uint32_t data32;
 532
 533        if (count != 1 && (count != 2 || buf[1] != '\n'))
 534                return -EINVAL;
 535
 536        spin_lock_irq(&card->param_queue_lock);
 537        data32 = ioread32(card->config_regs + GPIO_STATUS);
 538        if (buf[0] == '1') {
 539                data32 |= 1 << gattr->offset;
 540                iowrite32(data32, card->config_regs + GPIO_STATUS);
 541        } else if (buf[0] == '0') {
 542                data32 &= ~(1 << gattr->offset);
 543                iowrite32(data32, card->config_regs + GPIO_STATUS);
 544        } else {
 545                count = -EINVAL;
 546        }
 547        spin_unlock_irq(&card->param_queue_lock);
 548        return count;
 549}
 550
 551static ssize_t geos_gpio_show(struct device *dev, struct device_attribute *attr,
 552                              char *buf)
 553{
 554        struct pci_dev *pdev = to_pci_dev(dev);
 555        struct geos_gpio_attr *gattr = container_of(attr, struct geos_gpio_attr, attr);
 556        struct solos_card *card = pci_get_drvdata(pdev);
 557        uint32_t data32;
 558
 559        data32 = ioread32(card->config_regs + GPIO_STATUS);
 560        data32 = (data32 >> gattr->offset) & 1;
 561
 562        return sprintf(buf, "%d\n", data32);
 563}
 564
 565static ssize_t hardware_show(struct device *dev, struct device_attribute *attr,
 566                             char *buf)
 567{
 568        struct pci_dev *pdev = to_pci_dev(dev);
 569        struct geos_gpio_attr *gattr = container_of(attr, struct geos_gpio_attr, attr);
 570        struct solos_card *card = pci_get_drvdata(pdev);
 571        uint32_t data32;
 572
 573        data32 = ioread32(card->config_regs + GPIO_STATUS);
 574        switch (gattr->offset) {
 575        case 0:
 576                /* HardwareVersion */
 577                data32 = data32 & 0x1F;
 578                break;
 579        case 1:
 580                /* HardwareVariant */
 581                data32 = (data32 >> 5) & 0x0F;
 582                break;
 583        }
 584        return sprintf(buf, "%d\n", data32);
 585}
 586
 587static DEVICE_ATTR_RW(console);
 588
 589
 590#define SOLOS_ATTR_RO(x) static DEVICE_ATTR(x, 0444, solos_param_show, NULL);
 591#define SOLOS_ATTR_RW(x) static DEVICE_ATTR(x, 0644, solos_param_show, solos_param_store);
 592
 593#include "solos-attrlist.c"
 594
 595static SOLOS_GPIO_ATTR(GPIO1, 0644, geos_gpio_show, geos_gpio_store, 9);
 596static SOLOS_GPIO_ATTR(GPIO2, 0644, geos_gpio_show, geos_gpio_store, 10);
 597static SOLOS_GPIO_ATTR(GPIO3, 0644, geos_gpio_show, geos_gpio_store, 11);
 598static SOLOS_GPIO_ATTR(GPIO4, 0644, geos_gpio_show, geos_gpio_store, 12);
 599static SOLOS_GPIO_ATTR(GPIO5, 0644, geos_gpio_show, geos_gpio_store, 13);
 600static SOLOS_GPIO_ATTR(PushButton, 0444, geos_gpio_show, NULL, 14);
 601static SOLOS_GPIO_ATTR(HardwareVersion, 0444, hardware_show, NULL, 0);
 602static SOLOS_GPIO_ATTR(HardwareVariant, 0444, hardware_show, NULL, 1);
 603#undef SOLOS_ATTR_RO
 604#undef SOLOS_ATTR_RW
 605
 606#define SOLOS_ATTR_RO(x) &dev_attr_##x.attr,
 607#define SOLOS_ATTR_RW(x) &dev_attr_##x.attr,
 608
 609static struct attribute *solos_attrs[] = {
 610#include "solos-attrlist.c"
 611        NULL
 612};
 613
 614static const struct attribute_group solos_attr_group = {
 615        .attrs = solos_attrs,
 616        .name = "parameters",
 617};
 618
 619static struct attribute *gpio_attrs[] = {
 620        &gpio_attr_GPIO1.attr.attr,
 621        &gpio_attr_GPIO2.attr.attr,
 622        &gpio_attr_GPIO3.attr.attr,
 623        &gpio_attr_GPIO4.attr.attr,
 624        &gpio_attr_GPIO5.attr.attr,
 625        &gpio_attr_PushButton.attr.attr,
 626        &gpio_attr_HardwareVersion.attr.attr,
 627        &gpio_attr_HardwareVariant.attr.attr,
 628        NULL
 629};
 630
 631static const struct attribute_group gpio_attr_group = {
 632        .attrs = gpio_attrs,
 633        .name = "gpio",
 634};
 635
 636static int flash_upgrade(struct solos_card *card, int chip)
 637{
 638        const struct firmware *fw;
 639        const char *fw_name;
 640        int blocksize = 0;
 641        int numblocks = 0;
 642        int offset;
 643
 644        switch (chip) {
 645        case 0:
 646                fw_name = "solos-FPGA.bin";
 647                if (card->atmel_flash)
 648                        blocksize = ATMEL_FPGA_BLOCK;
 649                else
 650                        blocksize = SPI_FLASH_BLOCK;
 651                break;
 652        case 1:
 653                fw_name = "solos-Firmware.bin";
 654                if (card->atmel_flash)
 655                        blocksize = ATMEL_SOLOS_BLOCK;
 656                else
 657                        blocksize = SPI_FLASH_BLOCK;
 658                break;
 659        case 2:
 660                if (card->fpga_version > LEGACY_BUFFERS){
 661                        fw_name = "solos-db-FPGA.bin";
 662                        if (card->atmel_flash)
 663                                blocksize = ATMEL_FPGA_BLOCK;
 664                        else
 665                                blocksize = SPI_FLASH_BLOCK;
 666                } else {
 667                        dev_info(&card->dev->dev, "FPGA version doesn't support"
 668                                        " daughter board upgrades\n");
 669                        return -EPERM;
 670                }
 671                break;
 672        case 3:
 673                if (card->fpga_version > LEGACY_BUFFERS){
 674                        fw_name = "solos-Firmware.bin";
 675                        if (card->atmel_flash)
 676                                blocksize = ATMEL_SOLOS_BLOCK;
 677                        else
 678                                blocksize = SPI_FLASH_BLOCK;
 679                } else {
 680                        dev_info(&card->dev->dev, "FPGA version doesn't support"
 681                                        " daughter board upgrades\n");
 682                        return -EPERM;
 683                }
 684                break;
 685        default:
 686                return -ENODEV;
 687        }
 688
 689        if (request_firmware(&fw, fw_name, &card->dev->dev))
 690                return -ENOENT;
 691
 692        dev_info(&card->dev->dev, "Flash upgrade starting\n");
 693
 694        /* New FPGAs require driver version before permitting flash upgrades */
 695        iowrite32(DRIVER_VERSION, card->config_regs + DRIVER_VER);
 696
 697        numblocks = fw->size / blocksize;
 698        dev_info(&card->dev->dev, "Firmware size: %zd\n", fw->size);
 699        dev_info(&card->dev->dev, "Number of blocks: %d\n", numblocks);
 700        
 701        dev_info(&card->dev->dev, "Changing FPGA to Update mode\n");
 702        iowrite32(1, card->config_regs + FPGA_MODE);
 703        (void) ioread32(card->config_regs + FPGA_MODE); 
 704
 705        /* Set mode to Chip Erase */
 706        if(chip == 0 || chip == 2)
 707                dev_info(&card->dev->dev, "Set FPGA Flash mode to FPGA Chip Erase\n");
 708        if(chip == 1 || chip == 3)
 709                dev_info(&card->dev->dev, "Set FPGA Flash mode to Solos Chip Erase\n");
 710        iowrite32((chip * 2), card->config_regs + FLASH_MODE);
 711
 712
 713        iowrite32(1, card->config_regs + WRITE_FLASH);
 714        wait_event(card->fw_wq, !ioread32(card->config_regs + FLASH_BUSY));
 715
 716        for (offset = 0; offset < fw->size; offset += blocksize) {
 717                int i;
 718
 719                /* Clear write flag */
 720                iowrite32(0, card->config_regs + WRITE_FLASH);
 721
 722                /* Set mode to Block Write */
 723                /* dev_info(&card->dev->dev, "Set FPGA Flash mode to Block Write\n"); */
 724                iowrite32(((chip * 2) + 1), card->config_regs + FLASH_MODE);
 725
 726                /* Copy block to buffer, swapping each 16 bits for Atmel flash */
 727                for(i = 0; i < blocksize; i += 4) {
 728                        uint32_t word;
 729                        if (card->atmel_flash)
 730                                word = swahb32p((uint32_t *)(fw->data + offset + i));
 731                        else
 732                                word = *(uint32_t *)(fw->data + offset + i);
 733                        if(card->fpga_version > LEGACY_BUFFERS)
 734                                iowrite32(word, FLASH_BUF + i);
 735                        else
 736                                iowrite32(word, RX_BUF(card, 3) + i);
 737                }
 738
 739                /* Specify block number and then trigger flash write */
 740                iowrite32(offset / blocksize, card->config_regs + FLASH_BLOCK);
 741                iowrite32(1, card->config_regs + WRITE_FLASH);
 742                wait_event(card->fw_wq, !ioread32(card->config_regs + FLASH_BUSY));
 743        }
 744
 745        release_firmware(fw);
 746        iowrite32(0, card->config_regs + WRITE_FLASH);
 747        iowrite32(0, card->config_regs + FPGA_MODE);
 748        iowrite32(0, card->config_regs + FLASH_MODE);
 749        dev_info(&card->dev->dev, "Returning FPGA to Data mode\n");
 750        return 0;
 751}
 752
 753static irqreturn_t solos_irq(int irq, void *dev_id)
 754{
 755        struct solos_card *card = dev_id;
 756        int handled = 1;
 757
 758        iowrite32(0, card->config_regs + IRQ_CLEAR);
 759
 760        /* If we're up and running, just kick the tasklet to process TX/RX */
 761        if (card->atmdev[0])
 762                tasklet_schedule(&card->tlet);
 763        else
 764                wake_up(&card->fw_wq);
 765
 766        return IRQ_RETVAL(handled);
 767}
 768
 769static void solos_bh(unsigned long card_arg)
 770{
 771        struct solos_card *card = (void *)card_arg;
 772        uint32_t card_flags;
 773        uint32_t rx_done = 0;
 774        int port;
 775
 776        /*
 777         * Since fpga_tx() is going to need to read the flags under its lock,
 778         * it can return them to us so that we don't have to hit PCI MMIO
 779         * again for the same information
 780         */
 781        card_flags = fpga_tx(card);
 782
 783        for (port = 0; port < card->nr_ports; port++) {
 784                if (card_flags & (0x10 << port)) {
 785                        struct pkt_hdr _hdr, *header;
 786                        struct sk_buff *skb;
 787                        struct atm_vcc *vcc;
 788                        int size;
 789
 790                        if (card->using_dma) {
 791                                skb = card->rx_skb[port];
 792                                card->rx_skb[port] = NULL;
 793
 794                                dma_unmap_single(&card->dev->dev, SKB_CB(skb)->dma_addr,
 795                                                 RX_DMA_SIZE, DMA_FROM_DEVICE);
 796
 797                                header = (void *)skb->data;
 798                                size = le16_to_cpu(header->size);
 799                                skb_put(skb, size + sizeof(*header));
 800                                skb_pull(skb, sizeof(*header));
 801                        } else {
 802                                header = &_hdr;
 803
 804                                rx_done |= 0x10 << port;
 805
 806                                memcpy_fromio(header, RX_BUF(card, port), sizeof(*header));
 807
 808                                size = le16_to_cpu(header->size);
 809                                if (size > (card->buffer_size - sizeof(*header))){
 810                                        dev_warn(&card->dev->dev, "Invalid buffer size\n");
 811                                        continue;
 812                                }
 813
 814                                /* Use netdev_alloc_skb() because it adds NET_SKB_PAD of
 815                                 * headroom, and ensures we can route packets back out an
 816                                 * Ethernet interface (for example) without having to
 817                                 * reallocate. Adding NET_IP_ALIGN also ensures that both
 818                                 * PPPoATM and PPPoEoBR2684 packets end up aligned. */
 819                                skb = netdev_alloc_skb_ip_align(NULL, size + 1);
 820                                if (!skb) {
 821                                        if (net_ratelimit())
 822                                                dev_warn(&card->dev->dev, "Failed to allocate sk_buff for RX\n");
 823                                        continue;
 824                                }
 825
 826                                memcpy_fromio(skb_put(skb, size),
 827                                              RX_BUF(card, port) + sizeof(*header),
 828                                              size);
 829                        }
 830                        if (atmdebug) {
 831                                dev_info(&card->dev->dev, "Received: port %d\n", port);
 832                                dev_info(&card->dev->dev, "size: %d VPI: %d VCI: %d\n",
 833                                         size, le16_to_cpu(header->vpi),
 834                                         le16_to_cpu(header->vci));
 835                                print_buffer(skb);
 836                        }
 837
 838                        switch (le16_to_cpu(header->type)) {
 839                        case PKT_DATA:
 840                                vcc = find_vcc(card->atmdev[port], le16_to_cpu(header->vpi),
 841                                               le16_to_cpu(header->vci));
 842                                if (!vcc) {
 843                                        if (net_ratelimit())
 844                                                dev_warn(&card->dev->dev, "Received packet for unknown VPI.VCI %d.%d on port %d\n",
 845                                                         le16_to_cpu(header->vpi), le16_to_cpu(header->vci),
 846                                                         port);
 847                                        dev_kfree_skb_any(skb);
 848                                        break;
 849                                }
 850                                atm_charge(vcc, skb->truesize);
 851                                vcc->push(vcc, skb);
 852                                atomic_inc(&vcc->stats->rx);
 853                                break;
 854
 855                        case PKT_STATUS:
 856                                if (process_status(card, port, skb) &&
 857                                    net_ratelimit()) {
 858                                        dev_warn(&card->dev->dev, "Bad status packet of %d bytes on port %d:\n", skb->len, port);
 859                                        print_buffer(skb);
 860                                }
 861                                dev_kfree_skb_any(skb);
 862                                break;
 863
 864                        case PKT_COMMAND:
 865                        default: /* FIXME: Not really, surely? */
 866                                if (process_command(card, port, skb))
 867                                        break;
 868                                spin_lock(&card->cli_queue_lock);
 869                                if (skb_queue_len(&card->cli_queue[port]) > 10) {
 870                                        if (net_ratelimit())
 871                                                dev_warn(&card->dev->dev, "Dropping console response on port %d\n",
 872                                                         port);
 873                                        dev_kfree_skb_any(skb);
 874                                } else
 875                                        skb_queue_tail(&card->cli_queue[port], skb);
 876                                spin_unlock(&card->cli_queue_lock);
 877                                break;
 878                        }
 879                }
 880                /* Allocate RX skbs for any ports which need them */
 881                if (card->using_dma && card->atmdev[port] &&
 882                    !card->rx_skb[port]) {
 883                        /* Unlike the MMIO case (qv) we can't add NET_IP_ALIGN
 884                         * here; the FPGA can only DMA to addresses which are
 885                         * aligned to 4 bytes. */
 886                        struct sk_buff *skb = dev_alloc_skb(RX_DMA_SIZE);
 887                        if (skb) {
 888                                SKB_CB(skb)->dma_addr =
 889                                        dma_map_single(&card->dev->dev, skb->data,
 890                                                       RX_DMA_SIZE, DMA_FROM_DEVICE);
 891                                iowrite32(SKB_CB(skb)->dma_addr,
 892                                          card->config_regs + RX_DMA_ADDR(port));
 893                                card->rx_skb[port] = skb;
 894                        } else {
 895                                if (net_ratelimit())
 896                                        dev_warn(&card->dev->dev, "Failed to allocate RX skb");
 897
 898                                /* We'll have to try again later */
 899                                tasklet_schedule(&card->tlet);
 900                        }
 901                }
 902        }
 903        if (rx_done)
 904                iowrite32(rx_done, card->config_regs + FLAGS_ADDR);
 905
 906        return;
 907}
 908
 909static struct atm_vcc *find_vcc(struct atm_dev *dev, short vpi, int vci)
 910{
 911        struct hlist_head *head;
 912        struct atm_vcc *vcc = NULL;
 913        struct sock *s;
 914
 915        read_lock(&vcc_sklist_lock);
 916        head = &vcc_hash[vci & (VCC_HTABLE_SIZE -1)];
 917        sk_for_each(s, head) {
 918                vcc = atm_sk(s);
 919                if (vcc->dev == dev && vcc->vci == vci &&
 920                    vcc->vpi == vpi && vcc->qos.rxtp.traffic_class != ATM_NONE &&
 921                    test_bit(ATM_VF_READY, &vcc->flags))
 922                        goto out;
 923        }
 924        vcc = NULL;
 925 out:
 926        read_unlock(&vcc_sklist_lock);
 927        return vcc;
 928}
 929
 930static int popen(struct atm_vcc *vcc)
 931{
 932        struct solos_card *card = vcc->dev->dev_data;
 933        struct sk_buff *skb;
 934        struct pkt_hdr *header;
 935
 936        if (vcc->qos.aal != ATM_AAL5) {
 937                dev_warn(&card->dev->dev, "Unsupported ATM type %d\n",
 938                         vcc->qos.aal);
 939                return -EINVAL;
 940        }
 941
 942        skb = alloc_skb(sizeof(*header), GFP_KERNEL);
 943        if (!skb) {
 944                if (net_ratelimit())
 945                        dev_warn(&card->dev->dev, "Failed to allocate sk_buff in popen()\n");
 946                return -ENOMEM;
 947        }
 948        header = skb_put(skb, sizeof(*header));
 949
 950        header->size = cpu_to_le16(0);
 951        header->vpi = cpu_to_le16(vcc->vpi);
 952        header->vci = cpu_to_le16(vcc->vci);
 953        header->type = cpu_to_le16(PKT_POPEN);
 954
 955        fpga_queue(card, SOLOS_CHAN(vcc->dev), skb, NULL);
 956
 957        set_bit(ATM_VF_ADDR, &vcc->flags);
 958        set_bit(ATM_VF_READY, &vcc->flags);
 959
 960        return 0;
 961}
 962
 963static void pclose(struct atm_vcc *vcc)
 964{
 965        struct solos_card *card = vcc->dev->dev_data;
 966        unsigned char port = SOLOS_CHAN(vcc->dev);
 967        struct sk_buff *skb, *tmpskb;
 968        struct pkt_hdr *header;
 969
 970        /* Remove any yet-to-be-transmitted packets from the pending queue */
 971        spin_lock(&card->tx_queue_lock);
 972        skb_queue_walk_safe(&card->tx_queue[port], skb, tmpskb) {
 973                if (SKB_CB(skb)->vcc == vcc) {
 974                        skb_unlink(skb, &card->tx_queue[port]);
 975                        solos_pop(vcc, skb);
 976                }
 977        }
 978        spin_unlock(&card->tx_queue_lock);
 979
 980        skb = alloc_skb(sizeof(*header), GFP_KERNEL);
 981        if (!skb) {
 982                dev_warn(&card->dev->dev, "Failed to allocate sk_buff in pclose()\n");
 983                return;
 984        }
 985        header = skb_put(skb, sizeof(*header));
 986
 987        header->size = cpu_to_le16(0);
 988        header->vpi = cpu_to_le16(vcc->vpi);
 989        header->vci = cpu_to_le16(vcc->vci);
 990        header->type = cpu_to_le16(PKT_PCLOSE);
 991
 992        skb_get(skb);
 993        fpga_queue(card, port, skb, NULL);
 994
 995        if (!wait_event_timeout(card->param_wq, !skb_shared(skb), 5 * HZ))
 996                dev_warn(&card->dev->dev,
 997                         "Timeout waiting for VCC close on port %d\n", port);
 998
 999        dev_kfree_skb(skb);
1000
1001        /* Hold up vcc_destroy_socket() (our caller) until solos_bh() in the
1002           tasklet has finished processing any incoming packets (and, more to
1003           the point, using the vcc pointer). */
1004        tasklet_unlock_wait(&card->tlet);
1005
1006        clear_bit(ATM_VF_ADDR, &vcc->flags);
1007
1008        return;
1009}
1010
1011static int print_buffer(struct sk_buff *buf)
1012{
1013        int len,i;
1014        char msg[500];
1015        char item[10];
1016
1017        len = buf->len;
1018        for (i = 0; i < len; i++){
1019                if(i % 8 == 0)
1020                        sprintf(msg, "%02X: ", i);
1021
1022                sprintf(item,"%02X ",*(buf->data + i));
1023                strcat(msg, item);
1024                if(i % 8 == 7) {
1025                        sprintf(item, "\n");
1026                        strcat(msg, item);
1027                        printk(KERN_DEBUG "%s", msg);
1028                }
1029        }
1030        if (i % 8 != 0) {
1031                sprintf(item, "\n");
1032                strcat(msg, item);
1033                printk(KERN_DEBUG "%s", msg);
1034        }
1035        printk(KERN_DEBUG "\n");
1036
1037        return 0;
1038}
1039
1040static void fpga_queue(struct solos_card *card, int port, struct sk_buff *skb,
1041                       struct atm_vcc *vcc)
1042{
1043        int old_len;
1044        unsigned long flags;
1045
1046        SKB_CB(skb)->vcc = vcc;
1047
1048        spin_lock_irqsave(&card->tx_queue_lock, flags);
1049        old_len = skb_queue_len(&card->tx_queue[port]);
1050        skb_queue_tail(&card->tx_queue[port], skb);
1051        if (!old_len)
1052                card->tx_mask |= (1 << port);
1053        spin_unlock_irqrestore(&card->tx_queue_lock, flags);
1054
1055        /* Theoretically we could just schedule the tasklet here, but
1056           that introduces latency we don't want -- it's noticeable */
1057        if (!old_len)
1058                fpga_tx(card);
1059}
1060
1061static uint32_t fpga_tx(struct solos_card *card)
1062{
1063        uint32_t tx_pending, card_flags;
1064        uint32_t tx_started = 0;
1065        struct sk_buff *skb;
1066        struct atm_vcc *vcc;
1067        unsigned char port;
1068        unsigned long flags;
1069
1070        spin_lock_irqsave(&card->tx_lock, flags);
1071        
1072        card_flags = ioread32(card->config_regs + FLAGS_ADDR);
1073        /*
1074         * The queue lock is required for _writing_ to tx_mask, but we're
1075         * OK to read it here without locking. The only potential update
1076         * that we could race with is in fpga_queue() where it sets a bit
1077         * for a new port... but it's going to call this function again if
1078         * it's doing that, anyway.
1079         */
1080        tx_pending = card->tx_mask & ~card_flags;
1081
1082        for (port = 0; tx_pending; tx_pending >>= 1, port++) {
1083                if (tx_pending & 1) {
1084                        struct sk_buff *oldskb = card->tx_skb[port];
1085                        if (oldskb) {
1086                                dma_unmap_single(&card->dev->dev, SKB_CB(oldskb)->dma_addr,
1087                                                 oldskb->len, DMA_TO_DEVICE);
1088                                card->tx_skb[port] = NULL;
1089                        }
1090                        spin_lock(&card->tx_queue_lock);
1091                        skb = skb_dequeue(&card->tx_queue[port]);
1092                        if (!skb)
1093                                card->tx_mask &= ~(1 << port);
1094                        spin_unlock(&card->tx_queue_lock);
1095
1096                        if (skb && !card->using_dma) {
1097                                memcpy_toio(TX_BUF(card, port), skb->data, skb->len);
1098                                tx_started |= 1 << port;
1099                                oldskb = skb; /* We're done with this skb already */
1100                        } else if (skb && card->using_dma) {
1101                                unsigned char *data = skb->data;
1102                                if ((unsigned long)data & card->dma_alignment) {
1103                                        data = card->dma_bounce + (BUF_SIZE * port);
1104                                        memcpy(data, skb->data, skb->len);
1105                                }
1106                                SKB_CB(skb)->dma_addr = dma_map_single(&card->dev->dev, data,
1107                                                                       skb->len, DMA_TO_DEVICE);
1108                                card->tx_skb[port] = skb;
1109                                iowrite32(SKB_CB(skb)->dma_addr,
1110                                          card->config_regs + TX_DMA_ADDR(port));
1111                        }
1112
1113                        if (!oldskb)
1114                                continue;
1115
1116                        /* Clean up and free oldskb now it's gone */
1117                        if (atmdebug) {
1118                                struct pkt_hdr *header = (void *)oldskb->data;
1119                                int size = le16_to_cpu(header->size);
1120
1121                                skb_pull(oldskb, sizeof(*header));
1122                                dev_info(&card->dev->dev, "Transmitted: port %d\n",
1123                                         port);
1124                                dev_info(&card->dev->dev, "size: %d VPI: %d VCI: %d\n",
1125                                         size, le16_to_cpu(header->vpi),
1126                                         le16_to_cpu(header->vci));
1127                                print_buffer(oldskb);
1128                        }
1129
1130                        vcc = SKB_CB(oldskb)->vcc;
1131
1132                        if (vcc) {
1133                                atomic_inc(&vcc->stats->tx);
1134                                solos_pop(vcc, oldskb);
1135                        } else {
1136                                dev_kfree_skb_irq(oldskb);
1137                                wake_up(&card->param_wq);
1138                        }
1139                }
1140        }
1141        /* For non-DMA TX, write the 'TX start' bit for all four ports simultaneously */
1142        if (tx_started)
1143                iowrite32(tx_started, card->config_regs + FLAGS_ADDR);
1144
1145        spin_unlock_irqrestore(&card->tx_lock, flags);
1146        return card_flags;
1147}
1148
1149static int psend(struct atm_vcc *vcc, struct sk_buff *skb)
1150{
1151        struct solos_card *card = vcc->dev->dev_data;
1152        struct pkt_hdr *header;
1153        int pktlen;
1154
1155        pktlen = skb->len;
1156        if (pktlen > (BUF_SIZE - sizeof(*header))) {
1157                dev_warn(&card->dev->dev, "Length of PDU is too large. Dropping PDU.\n");
1158                solos_pop(vcc, skb);
1159                return 0;
1160        }
1161
1162        if (!skb_clone_writable(skb, sizeof(*header))) {
1163                int expand_by = 0;
1164                int ret;
1165
1166                if (skb_headroom(skb) < sizeof(*header))
1167                        expand_by = sizeof(*header) - skb_headroom(skb);
1168
1169                ret = pskb_expand_head(skb, expand_by, 0, GFP_ATOMIC);
1170                if (ret) {
1171                        dev_warn(&card->dev->dev, "pskb_expand_head failed.\n");
1172                        solos_pop(vcc, skb);
1173                        return ret;
1174                }
1175        }
1176
1177        header = skb_push(skb, sizeof(*header));
1178
1179        /* This does _not_ include the size of the header */
1180        header->size = cpu_to_le16(pktlen);
1181        header->vpi = cpu_to_le16(vcc->vpi);
1182        header->vci = cpu_to_le16(vcc->vci);
1183        header->type = cpu_to_le16(PKT_DATA);
1184
1185        fpga_queue(card, SOLOS_CHAN(vcc->dev), skb, vcc);
1186
1187        return 0;
1188}
1189
1190static const struct atmdev_ops fpga_ops = {
1191        .open =         popen,
1192        .close =        pclose,
1193        .ioctl =        NULL,
1194        .getsockopt =   NULL,
1195        .setsockopt =   NULL,
1196        .send =         psend,
1197        .send_oam =     NULL,
1198        .phy_put =      NULL,
1199        .phy_get =      NULL,
1200        .change_qos =   NULL,
1201        .proc_read =    NULL,
1202        .owner =        THIS_MODULE
1203};
1204
1205static int fpga_probe(struct pci_dev *dev, const struct pci_device_id *id)
1206{
1207        int err;
1208        uint16_t fpga_ver;
1209        uint8_t major_ver, minor_ver;
1210        uint32_t data32;
1211        struct solos_card *card;
1212
1213        card = kzalloc(sizeof(*card), GFP_KERNEL);
1214        if (!card)
1215                return -ENOMEM;
1216
1217        card->dev = dev;
1218        init_waitqueue_head(&card->fw_wq);
1219        init_waitqueue_head(&card->param_wq);
1220
1221        err = pci_enable_device(dev);
1222        if (err) {
1223                dev_warn(&dev->dev,  "Failed to enable PCI device\n");
1224                goto out;
1225        }
1226
1227        err = dma_set_mask_and_coherent(&dev->dev, DMA_BIT_MASK(32));
1228        if (err) {
1229                dev_warn(&dev->dev, "Failed to set 32-bit DMA mask\n");
1230                goto out;
1231        }
1232
1233        err = pci_request_regions(dev, "solos");
1234        if (err) {
1235                dev_warn(&dev->dev, "Failed to request regions\n");
1236                goto out;
1237        }
1238
1239        card->config_regs = pci_iomap(dev, 0, CONFIG_RAM_SIZE);
1240        if (!card->config_regs) {
1241                dev_warn(&dev->dev, "Failed to ioremap config registers\n");
1242                err = -ENOMEM;
1243                goto out_release_regions;
1244        }
1245        card->buffers = pci_iomap(dev, 1, DATA_RAM_SIZE);
1246        if (!card->buffers) {
1247                dev_warn(&dev->dev, "Failed to ioremap data buffers\n");
1248                err = -ENOMEM;
1249                goto out_unmap_config;
1250        }
1251
1252        if (reset) {
1253                iowrite32(1, card->config_regs + FPGA_MODE);
1254                ioread32(card->config_regs + FPGA_MODE);
1255
1256                iowrite32(0, card->config_regs + FPGA_MODE);
1257                ioread32(card->config_regs + FPGA_MODE);
1258        }
1259
1260        data32 = ioread32(card->config_regs + FPGA_VER);
1261        fpga_ver = (data32 & 0x0000FFFF);
1262        major_ver = ((data32 & 0xFF000000) >> 24);
1263        minor_ver = ((data32 & 0x00FF0000) >> 16);
1264        card->fpga_version = FPGA_VERSION(major_ver,minor_ver);
1265        if (card->fpga_version > LEGACY_BUFFERS)
1266                card->buffer_size = BUF_SIZE;
1267        else
1268                card->buffer_size = OLD_BUF_SIZE;
1269        dev_info(&dev->dev, "Solos FPGA Version %d.%02d svn-%d\n",
1270                 major_ver, minor_ver, fpga_ver);
1271
1272        if (fpga_ver < 37 && (fpga_upgrade || firmware_upgrade ||
1273                              db_fpga_upgrade || db_firmware_upgrade)) {
1274                dev_warn(&dev->dev,
1275                         "FPGA too old; cannot upgrade flash. Use JTAG.\n");
1276                fpga_upgrade = firmware_upgrade = 0;
1277                db_fpga_upgrade = db_firmware_upgrade = 0;
1278        }
1279
1280        /* Stopped using Atmel flash after 0.03-38 */
1281        if (fpga_ver < 39)
1282                card->atmel_flash = 1;
1283        else
1284                card->atmel_flash = 0;
1285
1286        data32 = ioread32(card->config_regs + PORTS);
1287        card->nr_ports = (data32 & 0x000000FF);
1288
1289        if (card->fpga_version >= DMA_SUPPORTED) {
1290                pci_set_master(dev);
1291                card->using_dma = 1;
1292                if (1) { /* All known FPGA versions so far */
1293                        card->dma_alignment = 3;
1294                        card->dma_bounce = kmalloc_array(card->nr_ports,
1295                                                         BUF_SIZE, GFP_KERNEL);
1296                        if (!card->dma_bounce) {
1297                                dev_warn(&card->dev->dev, "Failed to allocate DMA bounce buffers\n");
1298                                err = -ENOMEM;
1299                                /* Fallback to MMIO doesn't work */
1300                                goto out_unmap_both;
1301                        }
1302                }
1303        } else {
1304                card->using_dma = 0;
1305                /* Set RX empty flag for all ports */
1306                iowrite32(0xF0, card->config_regs + FLAGS_ADDR);
1307        }
1308
1309        pci_set_drvdata(dev, card);
1310
1311        tasklet_init(&card->tlet, solos_bh, (unsigned long)card);
1312        spin_lock_init(&card->tx_lock);
1313        spin_lock_init(&card->tx_queue_lock);
1314        spin_lock_init(&card->cli_queue_lock);
1315        spin_lock_init(&card->param_queue_lock);
1316        INIT_LIST_HEAD(&card->param_queue);
1317
1318        err = request_irq(dev->irq, solos_irq, IRQF_SHARED,
1319                          "solos-pci", card);
1320        if (err) {
1321                dev_dbg(&card->dev->dev, "Failed to request interrupt IRQ: %d\n", dev->irq);
1322                goto out_unmap_both;
1323        }
1324
1325        iowrite32(1, card->config_regs + IRQ_EN_ADDR);
1326
1327        if (fpga_upgrade)
1328                flash_upgrade(card, 0);
1329
1330        if (firmware_upgrade)
1331                flash_upgrade(card, 1);
1332
1333        if (db_fpga_upgrade)
1334                flash_upgrade(card, 2);
1335
1336        if (db_firmware_upgrade)
1337                flash_upgrade(card, 3);
1338
1339        err = atm_init(card, &dev->dev);
1340        if (err)
1341                goto out_free_irq;
1342
1343        if (card->fpga_version >= DMA_SUPPORTED &&
1344            sysfs_create_group(&card->dev->dev.kobj, &gpio_attr_group))
1345                dev_err(&card->dev->dev, "Could not register parameter group for GPIOs\n");
1346
1347        return 0;
1348
1349 out_free_irq:
1350        iowrite32(0, card->config_regs + IRQ_EN_ADDR);
1351        free_irq(dev->irq, card);
1352        tasklet_kill(&card->tlet);
1353        
1354 out_unmap_both:
1355        kfree(card->dma_bounce);
1356        pci_iounmap(dev, card->buffers);
1357 out_unmap_config:
1358        pci_iounmap(dev, card->config_regs);
1359 out_release_regions:
1360        pci_release_regions(dev);
1361 out:
1362        kfree(card);
1363        return err;
1364}
1365
1366static int atm_init(struct solos_card *card, struct device *parent)
1367{
1368        int i;
1369
1370        for (i = 0; i < card->nr_ports; i++) {
1371                struct sk_buff *skb;
1372                struct pkt_hdr *header;
1373
1374                skb_queue_head_init(&card->tx_queue[i]);
1375                skb_queue_head_init(&card->cli_queue[i]);
1376
1377                card->atmdev[i] = atm_dev_register("solos-pci", parent, &fpga_ops, -1, NULL);
1378                if (!card->atmdev[i]) {
1379                        dev_err(&card->dev->dev, "Could not register ATM device %d\n", i);
1380                        atm_remove(card);
1381                        return -ENODEV;
1382                }
1383                if (device_create_file(&card->atmdev[i]->class_dev, &dev_attr_console))
1384                        dev_err(&card->dev->dev, "Could not register console for ATM device %d\n", i);
1385                if (sysfs_create_group(&card->atmdev[i]->class_dev.kobj, &solos_attr_group))
1386                        dev_err(&card->dev->dev, "Could not register parameter group for ATM device %d\n", i);
1387
1388                dev_info(&card->dev->dev, "Registered ATM device %d\n", card->atmdev[i]->number);
1389
1390                card->atmdev[i]->ci_range.vpi_bits = 8;
1391                card->atmdev[i]->ci_range.vci_bits = 16;
1392                card->atmdev[i]->dev_data = card;
1393                card->atmdev[i]->phy_data = (void *)(unsigned long)i;
1394                atm_dev_signal_change(card->atmdev[i], ATM_PHY_SIG_FOUND);
1395
1396                skb = alloc_skb(sizeof(*header), GFP_KERNEL);
1397                if (!skb) {
1398                        dev_warn(&card->dev->dev, "Failed to allocate sk_buff in atm_init()\n");
1399                        continue;
1400                }
1401
1402                header = skb_put(skb, sizeof(*header));
1403
1404                header->size = cpu_to_le16(0);
1405                header->vpi = cpu_to_le16(0);
1406                header->vci = cpu_to_le16(0);
1407                header->type = cpu_to_le16(PKT_STATUS);
1408
1409                fpga_queue(card, i, skb, NULL);
1410        }
1411        return 0;
1412}
1413
1414static void atm_remove(struct solos_card *card)
1415{
1416        int i;
1417
1418        for (i = 0; i < card->nr_ports; i++) {
1419                if (card->atmdev[i]) {
1420                        struct sk_buff *skb;
1421
1422                        dev_info(&card->dev->dev, "Unregistering ATM device %d\n", card->atmdev[i]->number);
1423
1424                        sysfs_remove_group(&card->atmdev[i]->class_dev.kobj, &solos_attr_group);
1425                        atm_dev_deregister(card->atmdev[i]);
1426
1427                        skb = card->rx_skb[i];
1428                        if (skb) {
1429                                dma_unmap_single(&card->dev->dev, SKB_CB(skb)->dma_addr,
1430                                                 RX_DMA_SIZE, DMA_FROM_DEVICE);
1431                                dev_kfree_skb(skb);
1432                        }
1433                        skb = card->tx_skb[i];
1434                        if (skb) {
1435                                dma_unmap_single(&card->dev->dev, SKB_CB(skb)->dma_addr,
1436                                                 skb->len, DMA_TO_DEVICE);
1437                                dev_kfree_skb(skb);
1438                        }
1439                        while ((skb = skb_dequeue(&card->tx_queue[i])))
1440                                dev_kfree_skb(skb);
1441 
1442                }
1443        }
1444}
1445
1446static void fpga_remove(struct pci_dev *dev)
1447{
1448        struct solos_card *card = pci_get_drvdata(dev);
1449        
1450        /* Disable IRQs */
1451        iowrite32(0, card->config_regs + IRQ_EN_ADDR);
1452
1453        /* Reset FPGA */
1454        iowrite32(1, card->config_regs + FPGA_MODE);
1455        (void)ioread32(card->config_regs + FPGA_MODE); 
1456
1457        if (card->fpga_version >= DMA_SUPPORTED)
1458                sysfs_remove_group(&card->dev->dev.kobj, &gpio_attr_group);
1459
1460        atm_remove(card);
1461
1462        free_irq(dev->irq, card);
1463        tasklet_kill(&card->tlet);
1464
1465        kfree(card->dma_bounce);
1466
1467        /* Release device from reset */
1468        iowrite32(0, card->config_regs + FPGA_MODE);
1469        (void)ioread32(card->config_regs + FPGA_MODE); 
1470
1471        pci_iounmap(dev, card->buffers);
1472        pci_iounmap(dev, card->config_regs);
1473
1474        pci_release_regions(dev);
1475        pci_disable_device(dev);
1476
1477        kfree(card);
1478}
1479
1480static const struct pci_device_id fpga_pci_tbl[] = {
1481        { 0x10ee, 0x0300, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 },
1482        { 0, }
1483};
1484
1485MODULE_DEVICE_TABLE(pci,fpga_pci_tbl);
1486
1487static struct pci_driver fpga_driver = {
1488        .name =         "solos",
1489        .id_table =     fpga_pci_tbl,
1490        .probe =        fpga_probe,
1491        .remove =       fpga_remove,
1492};
1493
1494
1495static int __init solos_pci_init(void)
1496{
1497        BUILD_BUG_ON(sizeof(struct solos_skb_cb) > sizeof(((struct sk_buff *)0)->cb));
1498
1499        printk(KERN_INFO "Solos PCI Driver Version %s\n", VERSION);
1500        return pci_register_driver(&fpga_driver);
1501}
1502
1503static void __exit solos_pci_exit(void)
1504{
1505        pci_unregister_driver(&fpga_driver);
1506        printk(KERN_INFO "Solos PCI Driver %s Unloaded\n", VERSION);
1507}
1508
1509module_init(solos_pci_init);
1510module_exit(solos_pci_exit);
1511