linux/drivers/char/pcmcia/synclink_cs.c
<<
>>
Prefs
   1/*
   2 * linux/drivers/char/pcmcia/synclink_cs.c
   3 *
   4 * $Id: synclink_cs.c,v 4.34 2005/09/08 13:20:54 paulkf Exp $
   5 *
   6 * Device driver for Microgate SyncLink PC Card
   7 * multiprotocol serial adapter.
   8 *
   9 * written by Paul Fulghum for Microgate Corporation
  10 * paulkf@microgate.com
  11 *
  12 * Microgate and SyncLink are trademarks of Microgate Corporation
  13 *
  14 * This code is released under the GNU General Public License (GPL)
  15 *
  16 * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
  17 * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
  18 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
  19 * DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT,
  20 * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
  21 * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
  22 * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
  23 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
  24 * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
  25 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
  26 * OF THE POSSIBILITY OF SUCH DAMAGE.
  27 */
  28
  29#define VERSION(ver,rel,seq) (((ver)<<16) | ((rel)<<8) | (seq))
  30#if defined(__i386__)
  31#  define BREAKPOINT() asm("   int $3");
  32#else
  33#  define BREAKPOINT() { }
  34#endif
  35
  36#define MAX_DEVICE_COUNT 4
  37
  38#include <linux/module.h>
  39#include <linux/errno.h>
  40#include <linux/signal.h>
  41#include <linux/sched.h>
  42#include <linux/timer.h>
  43#include <linux/time.h>
  44#include <linux/interrupt.h>
  45#include <linux/tty.h>
  46#include <linux/tty_flip.h>
  47#include <linux/serial.h>
  48#include <linux/major.h>
  49#include <linux/string.h>
  50#include <linux/fcntl.h>
  51#include <linux/ptrace.h>
  52#include <linux/ioport.h>
  53#include <linux/mm.h>
  54#include <linux/seq_file.h>
  55#include <linux/slab.h>
  56#include <linux/netdevice.h>
  57#include <linux/vmalloc.h>
  58#include <linux/init.h>
  59#include <linux/delay.h>
  60#include <linux/ioctl.h>
  61#include <linux/synclink.h>
  62
  63#include <asm/io.h>
  64#include <asm/irq.h>
  65#include <asm/dma.h>
  66#include <linux/bitops.h>
  67#include <asm/types.h>
  68#include <linux/termios.h>
  69#include <linux/workqueue.h>
  70#include <linux/hdlc.h>
  71
  72#include <pcmcia/cistpl.h>
  73#include <pcmcia/cisreg.h>
  74#include <pcmcia/ds.h>
  75
  76#if defined(CONFIG_HDLC) || (defined(CONFIG_HDLC_MODULE) && defined(CONFIG_SYNCLINK_CS_MODULE))
  77#define SYNCLINK_GENERIC_HDLC 1
  78#else
  79#define SYNCLINK_GENERIC_HDLC 0
  80#endif
  81
  82#define GET_USER(error,value,addr) error = get_user(value,addr)
  83#define COPY_FROM_USER(error,dest,src,size) error = copy_from_user(dest,src,size) ? -EFAULT : 0
  84#define PUT_USER(error,value,addr) error = put_user(value,addr)
  85#define COPY_TO_USER(error,dest,src,size) error = copy_to_user(dest,src,size) ? -EFAULT : 0
  86
  87#include <linux/uaccess.h>
  88
  89static MGSL_PARAMS default_params = {
  90        MGSL_MODE_HDLC,                 /* unsigned long mode */
  91        0,                              /* unsigned char loopback; */
  92        HDLC_FLAG_UNDERRUN_ABORT15,     /* unsigned short flags; */
  93        HDLC_ENCODING_NRZI_SPACE,       /* unsigned char encoding; */
  94        0,                              /* unsigned long clock_speed; */
  95        0xff,                           /* unsigned char addr_filter; */
  96        HDLC_CRC_16_CCITT,              /* unsigned short crc_type; */
  97        HDLC_PREAMBLE_LENGTH_8BITS,     /* unsigned char preamble_length; */
  98        HDLC_PREAMBLE_PATTERN_NONE,     /* unsigned char preamble; */
  99        9600,                           /* unsigned long data_rate; */
 100        8,                              /* unsigned char data_bits; */
 101        1,                              /* unsigned char stop_bits; */
 102        ASYNC_PARITY_NONE               /* unsigned char parity; */
 103};
 104
 105typedef struct {
 106        int count;
 107        unsigned char status;
 108        char data[1];
 109} RXBUF;
 110
 111/* The queue of BH actions to be performed */
 112
 113#define BH_RECEIVE  1
 114#define BH_TRANSMIT 2
 115#define BH_STATUS   4
 116
 117#define IO_PIN_SHUTDOWN_LIMIT 100
 118
 119#define RELEVANT_IFLAG(iflag) (iflag & (IGNBRK|BRKINT|IGNPAR|PARMRK|INPCK))
 120
 121struct _input_signal_events {
 122        int     ri_up;
 123        int     ri_down;
 124        int     dsr_up;
 125        int     dsr_down;
 126        int     dcd_up;
 127        int     dcd_down;
 128        int     cts_up;
 129        int     cts_down;
 130};
 131
 132
 133/*
 134 * Device instance data structure
 135 */
 136
 137typedef struct _mgslpc_info {
 138        struct tty_port         port;
 139        void *if_ptr;   /* General purpose pointer (used by SPPP) */
 140        int                     magic;
 141        int                     line;
 142
 143        struct mgsl_icount      icount;
 144
 145        int                     timeout;
 146        int                     x_char;         /* xon/xoff character */
 147        unsigned char           read_status_mask;
 148        unsigned char           ignore_status_mask;
 149
 150        unsigned char *tx_buf;
 151        int            tx_put;
 152        int            tx_get;
 153        int            tx_count;
 154
 155        /* circular list of fixed length rx buffers */
 156
 157        unsigned char  *rx_buf;        /* memory allocated for all rx buffers */
 158        int            rx_buf_total_size; /* size of memory allocated for rx buffers */
 159        int            rx_put;         /* index of next empty rx buffer */
 160        int            rx_get;         /* index of next full rx buffer */
 161        int            rx_buf_size;    /* size in bytes of single rx buffer */
 162        int            rx_buf_count;   /* total number of rx buffers */
 163        int            rx_frame_count; /* number of full rx buffers */
 164
 165        wait_queue_head_t       status_event_wait_q;
 166        wait_queue_head_t       event_wait_q;
 167        struct timer_list       tx_timer;       /* HDLC transmit timeout timer */
 168        struct _mgslpc_info     *next_device;   /* device list link */
 169
 170        unsigned short imra_value;
 171        unsigned short imrb_value;
 172        unsigned char  pim_value;
 173
 174        spinlock_t lock;
 175        struct work_struct task;                /* task structure for scheduling bh */
 176
 177        u32 max_frame_size;
 178
 179        u32 pending_bh;
 180
 181        bool bh_running;
 182        bool bh_requested;
 183
 184        int dcd_chkcount; /* check counts to prevent */
 185        int cts_chkcount; /* too many IRQs if a signal */
 186        int dsr_chkcount; /* is floating */
 187        int ri_chkcount;
 188
 189        bool rx_enabled;
 190        bool rx_overflow;
 191
 192        bool tx_enabled;
 193        bool tx_active;
 194        bool tx_aborting;
 195        u32 idle_mode;
 196
 197        int if_mode; /* serial interface selection (RS-232, v.35 etc) */
 198
 199        char device_name[25];           /* device instance name */
 200
 201        unsigned int io_base;   /* base I/O address of adapter */
 202        unsigned int irq_level;
 203
 204        MGSL_PARAMS params;             /* communications parameters */
 205
 206        unsigned char serial_signals;   /* current serial signal states */
 207
 208        bool irq_occurred;              /* for diagnostics use */
 209        char testing_irq;
 210        unsigned int init_error;        /* startup error (DIAGS)        */
 211
 212        char *flag_buf;
 213        bool drop_rts_on_tx_done;
 214
 215        struct  _input_signal_events    input_signal_events;
 216
 217        /* PCMCIA support */
 218        struct pcmcia_device    *p_dev;
 219        int                   stop;
 220
 221        /* SPPP/Cisco HDLC device parts */
 222        int netcount;
 223        spinlock_t netlock;
 224
 225#if SYNCLINK_GENERIC_HDLC
 226        struct net_device *netdev;
 227#endif
 228
 229} MGSLPC_INFO;
 230
 231#define MGSLPC_MAGIC 0x5402
 232
 233/*
 234 * The size of the serial xmit buffer is 1 page, or 4096 bytes
 235 */
 236#define TXBUFSIZE 4096
 237
 238
 239#define CHA     0x00   /* channel A offset */
 240#define CHB     0x40   /* channel B offset */
 241
 242/*
 243 *  FIXME: PPC has PVR defined in asm/reg.h.  For now we just undef it.
 244 */
 245#undef PVR
 246
 247#define RXFIFO  0
 248#define TXFIFO  0
 249#define STAR    0x20
 250#define CMDR    0x20
 251#define RSTA    0x21
 252#define PRE     0x21
 253#define MODE    0x22
 254#define TIMR    0x23
 255#define XAD1    0x24
 256#define XAD2    0x25
 257#define RAH1    0x26
 258#define RAH2    0x27
 259#define DAFO    0x27
 260#define RAL1    0x28
 261#define RFC     0x28
 262#define RHCR    0x29
 263#define RAL2    0x29
 264#define RBCL    0x2a
 265#define XBCL    0x2a
 266#define RBCH    0x2b
 267#define XBCH    0x2b
 268#define CCR0    0x2c
 269#define CCR1    0x2d
 270#define CCR2    0x2e
 271#define CCR3    0x2f
 272#define VSTR    0x34
 273#define BGR     0x34
 274#define RLCR    0x35
 275#define AML     0x36
 276#define AMH     0x37
 277#define GIS     0x38
 278#define IVA     0x38
 279#define IPC     0x39
 280#define ISR     0x3a
 281#define IMR     0x3a
 282#define PVR     0x3c
 283#define PIS     0x3d
 284#define PIM     0x3d
 285#define PCR     0x3e
 286#define CCR4    0x3f
 287
 288// IMR/ISR
 289
 290#define IRQ_BREAK_ON    BIT15   // rx break detected
 291#define IRQ_DATAOVERRUN BIT14   // receive data overflow
 292#define IRQ_ALLSENT     BIT13   // all sent
 293#define IRQ_UNDERRUN    BIT12   // transmit data underrun
 294#define IRQ_TIMER       BIT11   // timer interrupt
 295#define IRQ_CTS         BIT10   // CTS status change
 296#define IRQ_TXREPEAT    BIT9    // tx message repeat
 297#define IRQ_TXFIFO      BIT8    // transmit pool ready
 298#define IRQ_RXEOM       BIT7    // receive message end
 299#define IRQ_EXITHUNT    BIT6    // receive frame start
 300#define IRQ_RXTIME      BIT6    // rx char timeout
 301#define IRQ_DCD         BIT2    // carrier detect status change
 302#define IRQ_OVERRUN     BIT1    // receive frame overflow
 303#define IRQ_RXFIFO      BIT0    // receive pool full
 304
 305// STAR
 306
 307#define XFW   BIT6              // transmit FIFO write enable
 308#define CEC   BIT2              // command executing
 309#define CTS   BIT1              // CTS state
 310
 311#define PVR_DTR      BIT0
 312#define PVR_DSR      BIT1
 313#define PVR_RI       BIT2
 314#define PVR_AUTOCTS  BIT3
 315#define PVR_RS232    0x20   /* 0010b */
 316#define PVR_V35      0xe0   /* 1110b */
 317#define PVR_RS422    0x40   /* 0100b */
 318
 319/* Register access functions */
 320
 321#define write_reg(info, reg, val) outb((val),(info)->io_base + (reg))
 322#define read_reg(info, reg) inb((info)->io_base + (reg))
 323
 324#define read_reg16(info, reg) inw((info)->io_base + (reg))
 325#define write_reg16(info, reg, val) outw((val), (info)->io_base + (reg))
 326
 327#define set_reg_bits(info, reg, mask) \
 328        write_reg(info, (reg), \
 329                 (unsigned char) (read_reg(info, (reg)) | (mask)))
 330#define clear_reg_bits(info, reg, mask) \
 331        write_reg(info, (reg), \
 332                 (unsigned char) (read_reg(info, (reg)) & ~(mask)))
 333/*
 334 * interrupt enable/disable routines
 335 */
 336static void irq_disable(MGSLPC_INFO *info, unsigned char channel, unsigned short mask)
 337{
 338        if (channel == CHA) {
 339                info->imra_value |= mask;
 340                write_reg16(info, CHA + IMR, info->imra_value);
 341        } else {
 342                info->imrb_value |= mask;
 343                write_reg16(info, CHB + IMR, info->imrb_value);
 344        }
 345}
 346static void irq_enable(MGSLPC_INFO *info, unsigned char channel, unsigned short mask)
 347{
 348        if (channel == CHA) {
 349                info->imra_value &= ~mask;
 350                write_reg16(info, CHA + IMR, info->imra_value);
 351        } else {
 352                info->imrb_value &= ~mask;
 353                write_reg16(info, CHB + IMR, info->imrb_value);
 354        }
 355}
 356
 357#define port_irq_disable(info, mask) \
 358        { info->pim_value |= (mask); write_reg(info, PIM, info->pim_value); }
 359
 360#define port_irq_enable(info, mask) \
 361        { info->pim_value &= ~(mask); write_reg(info, PIM, info->pim_value); }
 362
 363static void rx_start(MGSLPC_INFO *info);
 364static void rx_stop(MGSLPC_INFO *info);
 365
 366static void tx_start(MGSLPC_INFO *info, struct tty_struct *tty);
 367static void tx_stop(MGSLPC_INFO *info);
 368static void tx_set_idle(MGSLPC_INFO *info);
 369
 370static void get_signals(MGSLPC_INFO *info);
 371static void set_signals(MGSLPC_INFO *info);
 372
 373static void reset_device(MGSLPC_INFO *info);
 374
 375static void hdlc_mode(MGSLPC_INFO *info);
 376static void async_mode(MGSLPC_INFO *info);
 377
 378static void tx_timeout(struct timer_list *t);
 379
 380static int carrier_raised(struct tty_port *port);
 381static void dtr_rts(struct tty_port *port, int onoff);
 382
 383#if SYNCLINK_GENERIC_HDLC
 384#define dev_to_port(D) (dev_to_hdlc(D)->priv)
 385static void hdlcdev_tx_done(MGSLPC_INFO *info);
 386static void hdlcdev_rx(MGSLPC_INFO *info, char *buf, int size);
 387static int  hdlcdev_init(MGSLPC_INFO *info);
 388static void hdlcdev_exit(MGSLPC_INFO *info);
 389#endif
 390
 391static void trace_block(MGSLPC_INFO *info,const char* data, int count, int xmit);
 392
 393static bool register_test(MGSLPC_INFO *info);
 394static bool irq_test(MGSLPC_INFO *info);
 395static int adapter_test(MGSLPC_INFO *info);
 396
 397static int claim_resources(MGSLPC_INFO *info);
 398static void release_resources(MGSLPC_INFO *info);
 399static int mgslpc_add_device(MGSLPC_INFO *info);
 400static void mgslpc_remove_device(MGSLPC_INFO *info);
 401
 402static bool rx_get_frame(MGSLPC_INFO *info, struct tty_struct *tty);
 403static void rx_reset_buffers(MGSLPC_INFO *info);
 404static int  rx_alloc_buffers(MGSLPC_INFO *info);
 405static void rx_free_buffers(MGSLPC_INFO *info);
 406
 407static irqreturn_t mgslpc_isr(int irq, void *dev_id);
 408
 409/*
 410 * Bottom half interrupt handlers
 411 */
 412static void bh_handler(struct work_struct *work);
 413static void bh_transmit(MGSLPC_INFO *info, struct tty_struct *tty);
 414static void bh_status(MGSLPC_INFO *info);
 415
 416/*
 417 * ioctl handlers
 418 */
 419static int tiocmget(struct tty_struct *tty);
 420static int tiocmset(struct tty_struct *tty,
 421                                        unsigned int set, unsigned int clear);
 422static int get_stats(MGSLPC_INFO *info, struct mgsl_icount __user *user_icount);
 423static int get_params(MGSLPC_INFO *info, MGSL_PARAMS __user *user_params);
 424static int set_params(MGSLPC_INFO *info, MGSL_PARAMS __user *new_params, struct tty_struct *tty);
 425static int get_txidle(MGSLPC_INFO *info, int __user *idle_mode);
 426static int set_txidle(MGSLPC_INFO *info, int idle_mode);
 427static int set_txenable(MGSLPC_INFO *info, int enable, struct tty_struct *tty);
 428static int tx_abort(MGSLPC_INFO *info);
 429static int set_rxenable(MGSLPC_INFO *info, int enable);
 430static int wait_events(MGSLPC_INFO *info, int __user *mask);
 431
 432static MGSLPC_INFO *mgslpc_device_list = NULL;
 433static int mgslpc_device_count = 0;
 434
 435/*
 436 * Set this param to non-zero to load eax with the
 437 * .text section address and breakpoint on module load.
 438 * This is useful for use with gdb and add-symbol-file command.
 439 */
 440static bool break_on_load;
 441
 442/*
 443 * Driver major number, defaults to zero to get auto
 444 * assigned major number. May be forced as module parameter.
 445 */
 446static int ttymajor=0;
 447
 448static int debug_level = 0;
 449static int maxframe[MAX_DEVICE_COUNT] = {0,};
 450
 451module_param(break_on_load, bool, 0);
 452module_param(ttymajor, int, 0);
 453module_param(debug_level, int, 0);
 454module_param_array(maxframe, int, NULL, 0);
 455
 456MODULE_LICENSE("GPL");
 457
 458static char *driver_name = "SyncLink PC Card driver";
 459static char *driver_version = "$Revision: 4.34 $";
 460
 461static struct tty_driver *serial_driver;
 462
 463/* number of characters left in xmit buffer before we ask for more */
 464#define WAKEUP_CHARS 256
 465
 466static void mgslpc_change_params(MGSLPC_INFO *info, struct tty_struct *tty);
 467static void mgslpc_wait_until_sent(struct tty_struct *tty, int timeout);
 468
 469/* PCMCIA prototypes */
 470
 471static int mgslpc_config(struct pcmcia_device *link);
 472static void mgslpc_release(u_long arg);
 473static void mgslpc_detach(struct pcmcia_device *p_dev);
 474
 475/*
 476 * 1st function defined in .text section. Calling this function in
 477 * init_module() followed by a breakpoint allows a remote debugger
 478 * (gdb) to get the .text address for the add-symbol-file command.
 479 * This allows remote debugging of dynamically loadable modules.
 480 */
 481static void* mgslpc_get_text_ptr(void)
 482{
 483        return mgslpc_get_text_ptr;
 484}
 485
 486/**
 487 * line discipline callback wrappers
 488 *
 489 * The wrappers maintain line discipline references
 490 * while calling into the line discipline.
 491 *
 492 * ldisc_receive_buf  - pass receive data to line discipline
 493 */
 494
 495static void ldisc_receive_buf(struct tty_struct *tty,
 496                              const __u8 *data, char *flags, int count)
 497{
 498        struct tty_ldisc *ld;
 499        if (!tty)
 500                return;
 501        ld = tty_ldisc_ref(tty);
 502        if (ld) {
 503                if (ld->ops->receive_buf)
 504                        ld->ops->receive_buf(tty, data, flags, count);
 505                tty_ldisc_deref(ld);
 506        }
 507}
 508
 509static const struct tty_port_operations mgslpc_port_ops = {
 510        .carrier_raised = carrier_raised,
 511        .dtr_rts = dtr_rts
 512};
 513
 514static int mgslpc_probe(struct pcmcia_device *link)
 515{
 516        MGSLPC_INFO *info;
 517        int ret;
 518
 519        if (debug_level >= DEBUG_LEVEL_INFO)
 520                printk("mgslpc_attach\n");
 521
 522        info = kzalloc(sizeof(MGSLPC_INFO), GFP_KERNEL);
 523        if (!info) {
 524                printk("Error can't allocate device instance data\n");
 525                return -ENOMEM;
 526        }
 527
 528        info->magic = MGSLPC_MAGIC;
 529        tty_port_init(&info->port);
 530        info->port.ops = &mgslpc_port_ops;
 531        INIT_WORK(&info->task, bh_handler);
 532        info->max_frame_size = 4096;
 533        info->port.close_delay = 5*HZ/10;
 534        info->port.closing_wait = 30*HZ;
 535        init_waitqueue_head(&info->status_event_wait_q);
 536        init_waitqueue_head(&info->event_wait_q);
 537        spin_lock_init(&info->lock);
 538        spin_lock_init(&info->netlock);
 539        memcpy(&info->params,&default_params,sizeof(MGSL_PARAMS));
 540        info->idle_mode = HDLC_TXIDLE_FLAGS;
 541        info->imra_value = 0xffff;
 542        info->imrb_value = 0xffff;
 543        info->pim_value = 0xff;
 544
 545        info->p_dev = link;
 546        link->priv = info;
 547
 548        /* Initialize the struct pcmcia_device structure */
 549
 550        ret = mgslpc_config(link);
 551        if (ret != 0)
 552                goto failed;
 553
 554        ret = mgslpc_add_device(info);
 555        if (ret != 0)
 556                goto failed_release;
 557
 558        return 0;
 559
 560failed_release:
 561        mgslpc_release((u_long)link);
 562failed:
 563        tty_port_destroy(&info->port);
 564        kfree(info);
 565        return ret;
 566}
 567
 568/* Card has been inserted.
 569 */
 570
 571static int mgslpc_ioprobe(struct pcmcia_device *p_dev, void *priv_data)
 572{
 573        return pcmcia_request_io(p_dev);
 574}
 575
 576static int mgslpc_config(struct pcmcia_device *link)
 577{
 578        MGSLPC_INFO *info = link->priv;
 579        int ret;
 580
 581        if (debug_level >= DEBUG_LEVEL_INFO)
 582                printk("mgslpc_config(0x%p)\n", link);
 583
 584        link->config_flags |= CONF_ENABLE_IRQ | CONF_AUTO_SET_IO;
 585
 586        ret = pcmcia_loop_config(link, mgslpc_ioprobe, NULL);
 587        if (ret != 0)
 588                goto failed;
 589
 590        link->config_index = 8;
 591        link->config_regs = PRESENT_OPTION;
 592
 593        ret = pcmcia_request_irq(link, mgslpc_isr);
 594        if (ret)
 595                goto failed;
 596        ret = pcmcia_enable_device(link);
 597        if (ret)
 598                goto failed;
 599
 600        info->io_base = link->resource[0]->start;
 601        info->irq_level = link->irq;
 602        return 0;
 603
 604failed:
 605        mgslpc_release((u_long)link);
 606        return -ENODEV;
 607}
 608
 609/* Card has been removed.
 610 * Unregister device and release PCMCIA configuration.
 611 * If device is open, postpone until it is closed.
 612 */
 613static void mgslpc_release(u_long arg)
 614{
 615        struct pcmcia_device *link = (struct pcmcia_device *)arg;
 616
 617        if (debug_level >= DEBUG_LEVEL_INFO)
 618                printk("mgslpc_release(0x%p)\n", link);
 619
 620        pcmcia_disable_device(link);
 621}
 622
 623static void mgslpc_detach(struct pcmcia_device *link)
 624{
 625        if (debug_level >= DEBUG_LEVEL_INFO)
 626                printk("mgslpc_detach(0x%p)\n", link);
 627
 628        ((MGSLPC_INFO *)link->priv)->stop = 1;
 629        mgslpc_release((u_long)link);
 630
 631        mgslpc_remove_device((MGSLPC_INFO *)link->priv);
 632}
 633
 634static int mgslpc_suspend(struct pcmcia_device *link)
 635{
 636        MGSLPC_INFO *info = link->priv;
 637
 638        info->stop = 1;
 639
 640        return 0;
 641}
 642
 643static int mgslpc_resume(struct pcmcia_device *link)
 644{
 645        MGSLPC_INFO *info = link->priv;
 646
 647        info->stop = 0;
 648
 649        return 0;
 650}
 651
 652
 653static inline bool mgslpc_paranoia_check(MGSLPC_INFO *info,
 654                                        char *name, const char *routine)
 655{
 656#ifdef MGSLPC_PARANOIA_CHECK
 657        static const char *badmagic =
 658                "Warning: bad magic number for mgsl struct (%s) in %s\n";
 659        static const char *badinfo =
 660                "Warning: null mgslpc_info for (%s) in %s\n";
 661
 662        if (!info) {
 663                printk(badinfo, name, routine);
 664                return true;
 665        }
 666        if (info->magic != MGSLPC_MAGIC) {
 667                printk(badmagic, name, routine);
 668                return true;
 669        }
 670#else
 671        if (!info)
 672                return true;
 673#endif
 674        return false;
 675}
 676
 677
 678#define CMD_RXFIFO      BIT7    // release current rx FIFO
 679#define CMD_RXRESET     BIT6    // receiver reset
 680#define CMD_RXFIFO_READ BIT5
 681#define CMD_START_TIMER BIT4
 682#define CMD_TXFIFO      BIT3    // release current tx FIFO
 683#define CMD_TXEOM       BIT1    // transmit end message
 684#define CMD_TXRESET     BIT0    // transmit reset
 685
 686static bool wait_command_complete(MGSLPC_INFO *info, unsigned char channel)
 687{
 688        int i = 0;
 689        /* wait for command completion */
 690        while (read_reg(info, (unsigned char)(channel+STAR)) & BIT2) {
 691                udelay(1);
 692                if (i++ == 1000)
 693                        return false;
 694        }
 695        return true;
 696}
 697
 698static void issue_command(MGSLPC_INFO *info, unsigned char channel, unsigned char cmd)
 699{
 700        wait_command_complete(info, channel);
 701        write_reg(info, (unsigned char) (channel + CMDR), cmd);
 702}
 703
 704static void tx_pause(struct tty_struct *tty)
 705{
 706        MGSLPC_INFO *info = (MGSLPC_INFO *)tty->driver_data;
 707        unsigned long flags;
 708
 709        if (mgslpc_paranoia_check(info, tty->name, "tx_pause"))
 710                return;
 711        if (debug_level >= DEBUG_LEVEL_INFO)
 712                printk("tx_pause(%s)\n", info->device_name);
 713
 714        spin_lock_irqsave(&info->lock, flags);
 715        if (info->tx_enabled)
 716                tx_stop(info);
 717        spin_unlock_irqrestore(&info->lock, flags);
 718}
 719
 720static void tx_release(struct tty_struct *tty)
 721{
 722        MGSLPC_INFO *info = (MGSLPC_INFO *)tty->driver_data;
 723        unsigned long flags;
 724
 725        if (mgslpc_paranoia_check(info, tty->name, "tx_release"))
 726                return;
 727        if (debug_level >= DEBUG_LEVEL_INFO)
 728                printk("tx_release(%s)\n", info->device_name);
 729
 730        spin_lock_irqsave(&info->lock, flags);
 731        if (!info->tx_enabled)
 732                tx_start(info, tty);
 733        spin_unlock_irqrestore(&info->lock, flags);
 734}
 735
 736/* Return next bottom half action to perform.
 737 * or 0 if nothing to do.
 738 */
 739static int bh_action(MGSLPC_INFO *info)
 740{
 741        unsigned long flags;
 742        int rc = 0;
 743
 744        spin_lock_irqsave(&info->lock, flags);
 745
 746        if (info->pending_bh & BH_RECEIVE) {
 747                info->pending_bh &= ~BH_RECEIVE;
 748                rc = BH_RECEIVE;
 749        } else if (info->pending_bh & BH_TRANSMIT) {
 750                info->pending_bh &= ~BH_TRANSMIT;
 751                rc = BH_TRANSMIT;
 752        } else if (info->pending_bh & BH_STATUS) {
 753                info->pending_bh &= ~BH_STATUS;
 754                rc = BH_STATUS;
 755        }
 756
 757        if (!rc) {
 758                /* Mark BH routine as complete */
 759                info->bh_running = false;
 760                info->bh_requested = false;
 761        }
 762
 763        spin_unlock_irqrestore(&info->lock, flags);
 764
 765        return rc;
 766}
 767
 768static void bh_handler(struct work_struct *work)
 769{
 770        MGSLPC_INFO *info = container_of(work, MGSLPC_INFO, task);
 771        struct tty_struct *tty;
 772        int action;
 773
 774        if (debug_level >= DEBUG_LEVEL_BH)
 775                printk("%s(%d):bh_handler(%s) entry\n",
 776                        __FILE__,__LINE__,info->device_name);
 777
 778        info->bh_running = true;
 779        tty = tty_port_tty_get(&info->port);
 780
 781        while((action = bh_action(info)) != 0) {
 782
 783                /* Process work item */
 784                if (debug_level >= DEBUG_LEVEL_BH)
 785                        printk("%s(%d):bh_handler() work item action=%d\n",
 786                                __FILE__,__LINE__,action);
 787
 788                switch (action) {
 789
 790                case BH_RECEIVE:
 791                        while(rx_get_frame(info, tty));
 792                        break;
 793                case BH_TRANSMIT:
 794                        bh_transmit(info, tty);
 795                        break;
 796                case BH_STATUS:
 797                        bh_status(info);
 798                        break;
 799                default:
 800                        /* unknown work item ID */
 801                        printk("Unknown work item ID=%08X!\n", action);
 802                        break;
 803                }
 804        }
 805
 806        tty_kref_put(tty);
 807        if (debug_level >= DEBUG_LEVEL_BH)
 808                printk("%s(%d):bh_handler(%s) exit\n",
 809                        __FILE__,__LINE__,info->device_name);
 810}
 811
 812static void bh_transmit(MGSLPC_INFO *info, struct tty_struct *tty)
 813{
 814        if (debug_level >= DEBUG_LEVEL_BH)
 815                printk("bh_transmit() entry on %s\n", info->device_name);
 816
 817        if (tty)
 818                tty_wakeup(tty);
 819}
 820
 821static void bh_status(MGSLPC_INFO *info)
 822{
 823        info->ri_chkcount = 0;
 824        info->dsr_chkcount = 0;
 825        info->dcd_chkcount = 0;
 826        info->cts_chkcount = 0;
 827}
 828
 829/* eom: non-zero = end of frame */
 830static void rx_ready_hdlc(MGSLPC_INFO *info, int eom)
 831{
 832        unsigned char data[2];
 833        unsigned char fifo_count, read_count, i;
 834        RXBUF *buf = (RXBUF*)(info->rx_buf + (info->rx_put * info->rx_buf_size));
 835
 836        if (debug_level >= DEBUG_LEVEL_ISR)
 837                printk("%s(%d):rx_ready_hdlc(eom=%d)\n", __FILE__, __LINE__, eom);
 838
 839        if (!info->rx_enabled)
 840                return;
 841
 842        if (info->rx_frame_count >= info->rx_buf_count) {
 843                /* no more free buffers */
 844                issue_command(info, CHA, CMD_RXRESET);
 845                info->pending_bh |= BH_RECEIVE;
 846                info->rx_overflow = true;
 847                info->icount.buf_overrun++;
 848                return;
 849        }
 850
 851        if (eom) {
 852                /* end of frame, get FIFO count from RBCL register */
 853                fifo_count = (unsigned char)(read_reg(info, CHA+RBCL) & 0x1f);
 854                if (fifo_count == 0)
 855                        fifo_count = 32;
 856        } else
 857                fifo_count = 32;
 858
 859        do {
 860                if (fifo_count == 1) {
 861                        read_count = 1;
 862                        data[0] = read_reg(info, CHA + RXFIFO);
 863                } else {
 864                        read_count = 2;
 865                        *((unsigned short *) data) = read_reg16(info, CHA + RXFIFO);
 866                }
 867                fifo_count -= read_count;
 868                if (!fifo_count && eom)
 869                        buf->status = data[--read_count];
 870
 871                for (i = 0; i < read_count; i++) {
 872                        if (buf->count >= info->max_frame_size) {
 873                                /* frame too large, reset receiver and reset current buffer */
 874                                issue_command(info, CHA, CMD_RXRESET);
 875                                buf->count = 0;
 876                                return;
 877                        }
 878                        *(buf->data + buf->count) = data[i];
 879                        buf->count++;
 880                }
 881        } while (fifo_count);
 882
 883        if (eom) {
 884                info->pending_bh |= BH_RECEIVE;
 885                info->rx_frame_count++;
 886                info->rx_put++;
 887                if (info->rx_put >= info->rx_buf_count)
 888                        info->rx_put = 0;
 889        }
 890        issue_command(info, CHA, CMD_RXFIFO);
 891}
 892
 893static void rx_ready_async(MGSLPC_INFO *info, int tcd)
 894{
 895        struct tty_port *port = &info->port;
 896        unsigned char data, status, flag;
 897        int fifo_count;
 898        int work = 0;
 899        struct mgsl_icount *icount = &info->icount;
 900
 901        if (tcd) {
 902                /* early termination, get FIFO count from RBCL register */
 903                fifo_count = (unsigned char)(read_reg(info, CHA+RBCL) & 0x1f);
 904
 905                /* Zero fifo count could mean 0 or 32 bytes available.
 906                 * If BIT5 of STAR is set then at least 1 byte is available.
 907                 */
 908                if (!fifo_count && (read_reg(info,CHA+STAR) & BIT5))
 909                        fifo_count = 32;
 910        } else
 911                fifo_count = 32;
 912
 913        tty_buffer_request_room(port, fifo_count);
 914        /* Flush received async data to receive data buffer. */
 915        while (fifo_count) {
 916                data   = read_reg(info, CHA + RXFIFO);
 917                status = read_reg(info, CHA + RXFIFO);
 918                fifo_count -= 2;
 919
 920                icount->rx++;
 921                flag = TTY_NORMAL;
 922
 923                // if no frameing/crc error then save data
 924                // BIT7:parity error
 925                // BIT6:framing error
 926
 927                if (status & (BIT7 + BIT6)) {
 928                        if (status & BIT7)
 929                                icount->parity++;
 930                        else
 931                                icount->frame++;
 932
 933                        /* discard char if tty control flags say so */
 934                        if (status & info->ignore_status_mask)
 935                                continue;
 936
 937                        status &= info->read_status_mask;
 938
 939                        if (status & BIT7)
 940                                flag = TTY_PARITY;
 941                        else if (status & BIT6)
 942                                flag = TTY_FRAME;
 943                }
 944                work += tty_insert_flip_char(port, data, flag);
 945        }
 946        issue_command(info, CHA, CMD_RXFIFO);
 947
 948        if (debug_level >= DEBUG_LEVEL_ISR) {
 949                printk("%s(%d):rx_ready_async",
 950                        __FILE__,__LINE__);
 951                printk("%s(%d):rx=%d brk=%d parity=%d frame=%d overrun=%d\n",
 952                        __FILE__,__LINE__,icount->rx,icount->brk,
 953                        icount->parity,icount->frame,icount->overrun);
 954        }
 955
 956        if (work)
 957                tty_flip_buffer_push(port);
 958}
 959
 960
 961static void tx_done(MGSLPC_INFO *info, struct tty_struct *tty)
 962{
 963        if (!info->tx_active)
 964                return;
 965
 966        info->tx_active = false;
 967        info->tx_aborting = false;
 968
 969        if (info->params.mode == MGSL_MODE_ASYNC)
 970                return;
 971
 972        info->tx_count = info->tx_put = info->tx_get = 0;
 973        del_timer(&info->tx_timer);
 974
 975        if (info->drop_rts_on_tx_done) {
 976                get_signals(info);
 977                if (info->serial_signals & SerialSignal_RTS) {
 978                        info->serial_signals &= ~SerialSignal_RTS;
 979                        set_signals(info);
 980                }
 981                info->drop_rts_on_tx_done = false;
 982        }
 983
 984#if SYNCLINK_GENERIC_HDLC
 985        if (info->netcount)
 986                hdlcdev_tx_done(info);
 987        else
 988#endif
 989        {
 990                if (tty && (tty->stopped || tty->hw_stopped)) {
 991                        tx_stop(info);
 992                        return;
 993                }
 994                info->pending_bh |= BH_TRANSMIT;
 995        }
 996}
 997
 998static void tx_ready(MGSLPC_INFO *info, struct tty_struct *tty)
 999{
1000        unsigned char fifo_count = 32;
1001        int c;
1002
1003        if (debug_level >= DEBUG_LEVEL_ISR)
1004                printk("%s(%d):tx_ready(%s)\n", __FILE__, __LINE__, info->device_name);
1005
1006        if (info->params.mode == MGSL_MODE_HDLC) {
1007                if (!info->tx_active)
1008                        return;
1009        } else {
1010                if (tty && (tty->stopped || tty->hw_stopped)) {
1011                        tx_stop(info);
1012                        return;
1013                }
1014                if (!info->tx_count)
1015                        info->tx_active = false;
1016        }
1017
1018        if (!info->tx_count)
1019                return;
1020
1021        while (info->tx_count && fifo_count) {
1022                c = min(2, min_t(int, fifo_count, min(info->tx_count, TXBUFSIZE - info->tx_get)));
1023
1024                if (c == 1) {
1025                        write_reg(info, CHA + TXFIFO, *(info->tx_buf + info->tx_get));
1026                } else {
1027                        write_reg16(info, CHA + TXFIFO,
1028                                          *((unsigned short*)(info->tx_buf + info->tx_get)));
1029                }
1030                info->tx_count -= c;
1031                info->tx_get = (info->tx_get + c) & (TXBUFSIZE - 1);
1032                fifo_count -= c;
1033        }
1034
1035        if (info->params.mode == MGSL_MODE_ASYNC) {
1036                if (info->tx_count < WAKEUP_CHARS)
1037                        info->pending_bh |= BH_TRANSMIT;
1038                issue_command(info, CHA, CMD_TXFIFO);
1039        } else {
1040                if (info->tx_count)
1041                        issue_command(info, CHA, CMD_TXFIFO);
1042                else
1043                        issue_command(info, CHA, CMD_TXFIFO + CMD_TXEOM);
1044        }
1045}
1046
1047static void cts_change(MGSLPC_INFO *info, struct tty_struct *tty)
1048{
1049        get_signals(info);
1050        if ((info->cts_chkcount)++ >= IO_PIN_SHUTDOWN_LIMIT)
1051                irq_disable(info, CHB, IRQ_CTS);
1052        info->icount.cts++;
1053        if (info->serial_signals & SerialSignal_CTS)
1054                info->input_signal_events.cts_up++;
1055        else
1056                info->input_signal_events.cts_down++;
1057        wake_up_interruptible(&info->status_event_wait_q);
1058        wake_up_interruptible(&info->event_wait_q);
1059
1060        if (tty && tty_port_cts_enabled(&info->port)) {
1061                if (tty->hw_stopped) {
1062                        if (info->serial_signals & SerialSignal_CTS) {
1063                                if (debug_level >= DEBUG_LEVEL_ISR)
1064                                        printk("CTS tx start...");
1065                                tty->hw_stopped = 0;
1066                                tx_start(info, tty);
1067                                info->pending_bh |= BH_TRANSMIT;
1068                                return;
1069                        }
1070                } else {
1071                        if (!(info->serial_signals & SerialSignal_CTS)) {
1072                                if (debug_level >= DEBUG_LEVEL_ISR)
1073                                        printk("CTS tx stop...");
1074                                tty->hw_stopped = 1;
1075                                tx_stop(info);
1076                        }
1077                }
1078        }
1079        info->pending_bh |= BH_STATUS;
1080}
1081
1082static void dcd_change(MGSLPC_INFO *info, struct tty_struct *tty)
1083{
1084        get_signals(info);
1085        if ((info->dcd_chkcount)++ >= IO_PIN_SHUTDOWN_LIMIT)
1086                irq_disable(info, CHB, IRQ_DCD);
1087        info->icount.dcd++;
1088        if (info->serial_signals & SerialSignal_DCD) {
1089                info->input_signal_events.dcd_up++;
1090        }
1091        else
1092                info->input_signal_events.dcd_down++;
1093#if SYNCLINK_GENERIC_HDLC
1094        if (info->netcount) {
1095                if (info->serial_signals & SerialSignal_DCD)
1096                        netif_carrier_on(info->netdev);
1097                else
1098                        netif_carrier_off(info->netdev);
1099        }
1100#endif
1101        wake_up_interruptible(&info->status_event_wait_q);
1102        wake_up_interruptible(&info->event_wait_q);
1103
1104        if (tty_port_check_carrier(&info->port)) {
1105                if (debug_level >= DEBUG_LEVEL_ISR)
1106                        printk("%s CD now %s...", info->device_name,
1107                               (info->serial_signals & SerialSignal_DCD) ? "on" : "off");
1108                if (info->serial_signals & SerialSignal_DCD)
1109                        wake_up_interruptible(&info->port.open_wait);
1110                else {
1111                        if (debug_level >= DEBUG_LEVEL_ISR)
1112                                printk("doing serial hangup...");
1113                        if (tty)
1114                                tty_hangup(tty);
1115                }
1116        }
1117        info->pending_bh |= BH_STATUS;
1118}
1119
1120static void dsr_change(MGSLPC_INFO *info)
1121{
1122        get_signals(info);
1123        if ((info->dsr_chkcount)++ >= IO_PIN_SHUTDOWN_LIMIT)
1124                port_irq_disable(info, PVR_DSR);
1125        info->icount.dsr++;
1126        if (info->serial_signals & SerialSignal_DSR)
1127                info->input_signal_events.dsr_up++;
1128        else
1129                info->input_signal_events.dsr_down++;
1130        wake_up_interruptible(&info->status_event_wait_q);
1131        wake_up_interruptible(&info->event_wait_q);
1132        info->pending_bh |= BH_STATUS;
1133}
1134
1135static void ri_change(MGSLPC_INFO *info)
1136{
1137        get_signals(info);
1138        if ((info->ri_chkcount)++ >= IO_PIN_SHUTDOWN_LIMIT)
1139                port_irq_disable(info, PVR_RI);
1140        info->icount.rng++;
1141        if (info->serial_signals & SerialSignal_RI)
1142                info->input_signal_events.ri_up++;
1143        else
1144                info->input_signal_events.ri_down++;
1145        wake_up_interruptible(&info->status_event_wait_q);
1146        wake_up_interruptible(&info->event_wait_q);
1147        info->pending_bh |= BH_STATUS;
1148}
1149
1150/* Interrupt service routine entry point.
1151 *
1152 * Arguments:
1153 *
1154 * irq     interrupt number that caused interrupt
1155 * dev_id  device ID supplied during interrupt registration
1156 */
1157static irqreturn_t mgslpc_isr(int dummy, void *dev_id)
1158{
1159        MGSLPC_INFO *info = dev_id;
1160        struct tty_struct *tty;
1161        unsigned short isr;
1162        unsigned char gis, pis;
1163        int count=0;
1164
1165        if (debug_level >= DEBUG_LEVEL_ISR)
1166                printk("mgslpc_isr(%d) entry.\n", info->irq_level);
1167
1168        if (!(info->p_dev->_locked))
1169                return IRQ_HANDLED;
1170
1171        tty = tty_port_tty_get(&info->port);
1172
1173        spin_lock(&info->lock);
1174
1175        while ((gis = read_reg(info, CHA + GIS))) {
1176                if (debug_level >= DEBUG_LEVEL_ISR)
1177                        printk("mgslpc_isr %s gis=%04X\n", info->device_name,gis);
1178
1179                if ((gis & 0x70) || count > 1000) {
1180                        printk("synclink_cs:hardware failed or ejected\n");
1181                        break;
1182                }
1183                count++;
1184
1185                if (gis & (BIT1 | BIT0)) {
1186                        isr = read_reg16(info, CHB + ISR);
1187                        if (isr & IRQ_DCD)
1188                                dcd_change(info, tty);
1189                        if (isr & IRQ_CTS)
1190                                cts_change(info, tty);
1191                }
1192                if (gis & (BIT3 | BIT2))
1193                {
1194                        isr = read_reg16(info, CHA + ISR);
1195                        if (isr & IRQ_TIMER) {
1196                                info->irq_occurred = true;
1197                                irq_disable(info, CHA, IRQ_TIMER);
1198                        }
1199
1200                        /* receive IRQs */
1201                        if (isr & IRQ_EXITHUNT) {
1202                                info->icount.exithunt++;
1203                                wake_up_interruptible(&info->event_wait_q);
1204                        }
1205                        if (isr & IRQ_BREAK_ON) {
1206                                info->icount.brk++;
1207                                if (info->port.flags & ASYNC_SAK)
1208                                        do_SAK(tty);
1209                        }
1210                        if (isr & IRQ_RXTIME) {
1211                                issue_command(info, CHA, CMD_RXFIFO_READ);
1212                        }
1213                        if (isr & (IRQ_RXEOM | IRQ_RXFIFO)) {
1214                                if (info->params.mode == MGSL_MODE_HDLC)
1215                                        rx_ready_hdlc(info, isr & IRQ_RXEOM);
1216                                else
1217                                        rx_ready_async(info, isr & IRQ_RXEOM);
1218                        }
1219
1220                        /* transmit IRQs */
1221                        if (isr & IRQ_UNDERRUN) {
1222                                if (info->tx_aborting)
1223                                        info->icount.txabort++;
1224                                else
1225                                        info->icount.txunder++;
1226                                tx_done(info, tty);
1227                        }
1228                        else if (isr & IRQ_ALLSENT) {
1229                                info->icount.txok++;
1230                                tx_done(info, tty);
1231                        }
1232                        else if (isr & IRQ_TXFIFO)
1233                                tx_ready(info, tty);
1234                }
1235                if (gis & BIT7) {
1236                        pis = read_reg(info, CHA + PIS);
1237                        if (pis & BIT1)
1238                                dsr_change(info);
1239                        if (pis & BIT2)
1240                                ri_change(info);
1241                }
1242        }
1243
1244        /* Request bottom half processing if there's something
1245         * for it to do and the bh is not already running
1246         */
1247
1248        if (info->pending_bh && !info->bh_running && !info->bh_requested) {
1249                if (debug_level >= DEBUG_LEVEL_ISR)
1250                        printk("%s(%d):%s queueing bh task.\n",
1251                                __FILE__,__LINE__,info->device_name);
1252                schedule_work(&info->task);
1253                info->bh_requested = true;
1254        }
1255
1256        spin_unlock(&info->lock);
1257        tty_kref_put(tty);
1258
1259        if (debug_level >= DEBUG_LEVEL_ISR)
1260                printk("%s(%d):mgslpc_isr(%d)exit.\n",
1261                       __FILE__, __LINE__, info->irq_level);
1262
1263        return IRQ_HANDLED;
1264}
1265
1266/* Initialize and start device.
1267 */
1268static int startup(MGSLPC_INFO * info, struct tty_struct *tty)
1269{
1270        int retval = 0;
1271
1272        if (debug_level >= DEBUG_LEVEL_INFO)
1273                printk("%s(%d):startup(%s)\n", __FILE__, __LINE__, info->device_name);
1274
1275        if (tty_port_initialized(&info->port))
1276                return 0;
1277
1278        if (!info->tx_buf) {
1279                /* allocate a page of memory for a transmit buffer */
1280                info->tx_buf = (unsigned char *)get_zeroed_page(GFP_KERNEL);
1281                if (!info->tx_buf) {
1282                        printk(KERN_ERR"%s(%d):%s can't allocate transmit buffer\n",
1283                                __FILE__, __LINE__, info->device_name);
1284                        return -ENOMEM;
1285                }
1286        }
1287
1288        info->pending_bh = 0;
1289
1290        memset(&info->icount, 0, sizeof(info->icount));
1291
1292        timer_setup(&info->tx_timer, tx_timeout, 0);
1293
1294        /* Allocate and claim adapter resources */
1295        retval = claim_resources(info);
1296
1297        /* perform existence check and diagnostics */
1298        if (!retval)
1299                retval = adapter_test(info);
1300
1301        if (retval) {
1302                if (capable(CAP_SYS_ADMIN) && tty)
1303                        set_bit(TTY_IO_ERROR, &tty->flags);
1304                release_resources(info);
1305                return retval;
1306        }
1307
1308        /* program hardware for current parameters */
1309        mgslpc_change_params(info, tty);
1310
1311        if (tty)
1312                clear_bit(TTY_IO_ERROR, &tty->flags);
1313
1314        tty_port_set_initialized(&info->port, 1);
1315
1316        return 0;
1317}
1318
1319/* Called by mgslpc_close() and mgslpc_hangup() to shutdown hardware
1320 */
1321static void shutdown(MGSLPC_INFO * info, struct tty_struct *tty)
1322{
1323        unsigned long flags;
1324
1325        if (!tty_port_initialized(&info->port))
1326                return;
1327
1328        if (debug_level >= DEBUG_LEVEL_INFO)
1329                printk("%s(%d):mgslpc_shutdown(%s)\n",
1330                         __FILE__, __LINE__, info->device_name);
1331
1332        /* clear status wait queue because status changes */
1333        /* can't happen after shutting down the hardware */
1334        wake_up_interruptible(&info->status_event_wait_q);
1335        wake_up_interruptible(&info->event_wait_q);
1336
1337        del_timer_sync(&info->tx_timer);
1338
1339        if (info->tx_buf) {
1340                free_page((unsigned long) info->tx_buf);
1341                info->tx_buf = NULL;
1342        }
1343
1344        spin_lock_irqsave(&info->lock, flags);
1345
1346        rx_stop(info);
1347        tx_stop(info);
1348
1349        /* TODO:disable interrupts instead of reset to preserve signal states */
1350        reset_device(info);
1351
1352        if (!tty || C_HUPCL(tty)) {
1353                info->serial_signals &= ~(SerialSignal_RTS | SerialSignal_DTR);
1354                set_signals(info);
1355        }
1356
1357        spin_unlock_irqrestore(&info->lock, flags);
1358
1359        release_resources(info);
1360
1361        if (tty)
1362                set_bit(TTY_IO_ERROR, &tty->flags);
1363
1364        tty_port_set_initialized(&info->port, 0);
1365}
1366
1367static void mgslpc_program_hw(MGSLPC_INFO *info, struct tty_struct *tty)
1368{
1369        unsigned long flags;
1370
1371        spin_lock_irqsave(&info->lock, flags);
1372
1373        rx_stop(info);
1374        tx_stop(info);
1375        info->tx_count = info->tx_put = info->tx_get = 0;
1376
1377        if (info->params.mode == MGSL_MODE_HDLC || info->netcount)
1378                hdlc_mode(info);
1379        else
1380                async_mode(info);
1381
1382        set_signals(info);
1383
1384        info->dcd_chkcount = 0;
1385        info->cts_chkcount = 0;
1386        info->ri_chkcount = 0;
1387        info->dsr_chkcount = 0;
1388
1389        irq_enable(info, CHB, IRQ_DCD | IRQ_CTS);
1390        port_irq_enable(info, (unsigned char) PVR_DSR | PVR_RI);
1391        get_signals(info);
1392
1393        if (info->netcount || (tty && C_CREAD(tty)))
1394                rx_start(info);
1395
1396        spin_unlock_irqrestore(&info->lock, flags);
1397}
1398
1399/* Reconfigure adapter based on new parameters
1400 */
1401static void mgslpc_change_params(MGSLPC_INFO *info, struct tty_struct *tty)
1402{
1403        unsigned cflag;
1404        int bits_per_char;
1405
1406        if (!tty)
1407                return;
1408
1409        if (debug_level >= DEBUG_LEVEL_INFO)
1410                printk("%s(%d):mgslpc_change_params(%s)\n",
1411                         __FILE__, __LINE__, info->device_name);
1412
1413        cflag = tty->termios.c_cflag;
1414
1415        /* if B0 rate (hangup) specified then negate RTS and DTR */
1416        /* otherwise assert RTS and DTR */
1417        if (cflag & CBAUD)
1418                info->serial_signals |= SerialSignal_RTS | SerialSignal_DTR;
1419        else
1420                info->serial_signals &= ~(SerialSignal_RTS | SerialSignal_DTR);
1421
1422        /* byte size and parity */
1423
1424        switch (cflag & CSIZE) {
1425        case CS5: info->params.data_bits = 5; break;
1426        case CS6: info->params.data_bits = 6; break;
1427        case CS7: info->params.data_bits = 7; break;
1428        case CS8: info->params.data_bits = 8; break;
1429        default:  info->params.data_bits = 7; break;
1430        }
1431
1432        if (cflag & CSTOPB)
1433                info->params.stop_bits = 2;
1434        else
1435                info->params.stop_bits = 1;
1436
1437        info->params.parity = ASYNC_PARITY_NONE;
1438        if (cflag & PARENB) {
1439                if (cflag & PARODD)
1440                        info->params.parity = ASYNC_PARITY_ODD;
1441                else
1442                        info->params.parity = ASYNC_PARITY_EVEN;
1443#ifdef CMSPAR
1444                if (cflag & CMSPAR)
1445                        info->params.parity = ASYNC_PARITY_SPACE;
1446#endif
1447        }
1448
1449        /* calculate number of jiffies to transmit a full
1450         * FIFO (32 bytes) at specified data rate
1451         */
1452        bits_per_char = info->params.data_bits +
1453                        info->params.stop_bits + 1;
1454
1455        /* if port data rate is set to 460800 or less then
1456         * allow tty settings to override, otherwise keep the
1457         * current data rate.
1458         */
1459        if (info->params.data_rate <= 460800) {
1460                info->params.data_rate = tty_get_baud_rate(tty);
1461        }
1462
1463        if (info->params.data_rate) {
1464                info->timeout = (32*HZ*bits_per_char) /
1465                                info->params.data_rate;
1466        }
1467        info->timeout += HZ/50;         /* Add .02 seconds of slop */
1468
1469        tty_port_set_cts_flow(&info->port, cflag & CRTSCTS);
1470        tty_port_set_check_carrier(&info->port, ~cflag & CLOCAL);
1471
1472        /* process tty input control flags */
1473
1474        info->read_status_mask = 0;
1475        if (I_INPCK(tty))
1476                info->read_status_mask |= BIT7 | BIT6;
1477        if (I_IGNPAR(tty))
1478                info->ignore_status_mask |= BIT7 | BIT6;
1479
1480        mgslpc_program_hw(info, tty);
1481}
1482
1483/* Add a character to the transmit buffer
1484 */
1485static int mgslpc_put_char(struct tty_struct *tty, unsigned char ch)
1486{
1487        MGSLPC_INFO *info = (MGSLPC_INFO *)tty->driver_data;
1488        unsigned long flags;
1489
1490        if (debug_level >= DEBUG_LEVEL_INFO) {
1491                printk("%s(%d):mgslpc_put_char(%d) on %s\n",
1492                        __FILE__, __LINE__, ch, info->device_name);
1493        }
1494
1495        if (mgslpc_paranoia_check(info, tty->name, "mgslpc_put_char"))
1496                return 0;
1497
1498        if (!info->tx_buf)
1499                return 0;
1500
1501        spin_lock_irqsave(&info->lock, flags);
1502
1503        if (info->params.mode == MGSL_MODE_ASYNC || !info->tx_active) {
1504                if (info->tx_count < TXBUFSIZE - 1) {
1505                        info->tx_buf[info->tx_put++] = ch;
1506                        info->tx_put &= TXBUFSIZE-1;
1507                        info->tx_count++;
1508                }
1509        }
1510
1511        spin_unlock_irqrestore(&info->lock, flags);
1512        return 1;
1513}
1514
1515/* Enable transmitter so remaining characters in the
1516 * transmit buffer are sent.
1517 */
1518static void mgslpc_flush_chars(struct tty_struct *tty)
1519{
1520        MGSLPC_INFO *info = (MGSLPC_INFO *)tty->driver_data;
1521        unsigned long flags;
1522
1523        if (debug_level >= DEBUG_LEVEL_INFO)
1524                printk("%s(%d):mgslpc_flush_chars() entry on %s tx_count=%d\n",
1525                        __FILE__, __LINE__, info->device_name, info->tx_count);
1526
1527        if (mgslpc_paranoia_check(info, tty->name, "mgslpc_flush_chars"))
1528                return;
1529
1530        if (info->tx_count <= 0 || tty->stopped ||
1531            tty->hw_stopped || !info->tx_buf)
1532                return;
1533
1534        if (debug_level >= DEBUG_LEVEL_INFO)
1535                printk("%s(%d):mgslpc_flush_chars() entry on %s starting transmitter\n",
1536                        __FILE__, __LINE__, info->device_name);
1537
1538        spin_lock_irqsave(&info->lock, flags);
1539        if (!info->tx_active)
1540                tx_start(info, tty);
1541        spin_unlock_irqrestore(&info->lock, flags);
1542}
1543
1544/* Send a block of data
1545 *
1546 * Arguments:
1547 *
1548 * tty        pointer to tty information structure
1549 * buf        pointer to buffer containing send data
1550 * count      size of send data in bytes
1551 *
1552 * Returns: number of characters written
1553 */
1554static int mgslpc_write(struct tty_struct * tty,
1555                        const unsigned char *buf, int count)
1556{
1557        int c, ret = 0;
1558        MGSLPC_INFO *info = (MGSLPC_INFO *)tty->driver_data;
1559        unsigned long flags;
1560
1561        if (debug_level >= DEBUG_LEVEL_INFO)
1562                printk("%s(%d):mgslpc_write(%s) count=%d\n",
1563                        __FILE__, __LINE__, info->device_name, count);
1564
1565        if (mgslpc_paranoia_check(info, tty->name, "mgslpc_write") ||
1566                !info->tx_buf)
1567                goto cleanup;
1568
1569        if (info->params.mode == MGSL_MODE_HDLC) {
1570                if (count > TXBUFSIZE) {
1571                        ret = -EIO;
1572                        goto cleanup;
1573                }
1574                if (info->tx_active)
1575                        goto cleanup;
1576                else if (info->tx_count)
1577                        goto start;
1578        }
1579
1580        for (;;) {
1581                c = min(count,
1582                        min(TXBUFSIZE - info->tx_count - 1,
1583                            TXBUFSIZE - info->tx_put));
1584                if (c <= 0)
1585                        break;
1586
1587                memcpy(info->tx_buf + info->tx_put, buf, c);
1588
1589                spin_lock_irqsave(&info->lock, flags);
1590                info->tx_put = (info->tx_put + c) & (TXBUFSIZE-1);
1591                info->tx_count += c;
1592                spin_unlock_irqrestore(&info->lock, flags);
1593
1594                buf += c;
1595                count -= c;
1596                ret += c;
1597        }
1598start:
1599        if (info->tx_count && !tty->stopped && !tty->hw_stopped) {
1600                spin_lock_irqsave(&info->lock, flags);
1601                if (!info->tx_active)
1602                        tx_start(info, tty);
1603                spin_unlock_irqrestore(&info->lock, flags);
1604        }
1605cleanup:
1606        if (debug_level >= DEBUG_LEVEL_INFO)
1607                printk("%s(%d):mgslpc_write(%s) returning=%d\n",
1608                        __FILE__, __LINE__, info->device_name, ret);
1609        return ret;
1610}
1611
1612/* Return the count of free bytes in transmit buffer
1613 */
1614static int mgslpc_write_room(struct tty_struct *tty)
1615{
1616        MGSLPC_INFO *info = (MGSLPC_INFO *)tty->driver_data;
1617        int ret;
1618
1619        if (mgslpc_paranoia_check(info, tty->name, "mgslpc_write_room"))
1620                return 0;
1621
1622        if (info->params.mode == MGSL_MODE_HDLC) {
1623                /* HDLC (frame oriented) mode */
1624                if (info->tx_active)
1625                        return 0;
1626                else
1627                        return HDLC_MAX_FRAME_SIZE;
1628        } else {
1629                ret = TXBUFSIZE - info->tx_count - 1;
1630                if (ret < 0)
1631                        ret = 0;
1632        }
1633
1634        if (debug_level >= DEBUG_LEVEL_INFO)
1635                printk("%s(%d):mgslpc_write_room(%s)=%d\n",
1636                         __FILE__, __LINE__, info->device_name, ret);
1637        return ret;
1638}
1639
1640/* Return the count of bytes in transmit buffer
1641 */
1642static int mgslpc_chars_in_buffer(struct tty_struct *tty)
1643{
1644        MGSLPC_INFO *info = (MGSLPC_INFO *)tty->driver_data;
1645        int rc;
1646
1647        if (debug_level >= DEBUG_LEVEL_INFO)
1648                printk("%s(%d):mgslpc_chars_in_buffer(%s)\n",
1649                         __FILE__, __LINE__, info->device_name);
1650
1651        if (mgslpc_paranoia_check(info, tty->name, "mgslpc_chars_in_buffer"))
1652                return 0;
1653
1654        if (info->params.mode == MGSL_MODE_HDLC)
1655                rc = info->tx_active ? info->max_frame_size : 0;
1656        else
1657                rc = info->tx_count;
1658
1659        if (debug_level >= DEBUG_LEVEL_INFO)
1660                printk("%s(%d):mgslpc_chars_in_buffer(%s)=%d\n",
1661                         __FILE__, __LINE__, info->device_name, rc);
1662
1663        return rc;
1664}
1665
1666/* Discard all data in the send buffer
1667 */
1668static void mgslpc_flush_buffer(struct tty_struct *tty)
1669{
1670        MGSLPC_INFO *info = (MGSLPC_INFO *)tty->driver_data;
1671        unsigned long flags;
1672
1673        if (debug_level >= DEBUG_LEVEL_INFO)
1674                printk("%s(%d):mgslpc_flush_buffer(%s) entry\n",
1675                         __FILE__, __LINE__, info->device_name);
1676
1677        if (mgslpc_paranoia_check(info, tty->name, "mgslpc_flush_buffer"))
1678                return;
1679
1680        spin_lock_irqsave(&info->lock, flags);
1681        info->tx_count = info->tx_put = info->tx_get = 0;
1682        del_timer(&info->tx_timer);
1683        spin_unlock_irqrestore(&info->lock, flags);
1684
1685        wake_up_interruptible(&tty->write_wait);
1686        tty_wakeup(tty);
1687}
1688
1689/* Send a high-priority XON/XOFF character
1690 */
1691static void mgslpc_send_xchar(struct tty_struct *tty, char ch)
1692{
1693        MGSLPC_INFO *info = (MGSLPC_INFO *)tty->driver_data;
1694        unsigned long flags;
1695
1696        if (debug_level >= DEBUG_LEVEL_INFO)
1697                printk("%s(%d):mgslpc_send_xchar(%s,%d)\n",
1698                         __FILE__, __LINE__, info->device_name, ch);
1699
1700        if (mgslpc_paranoia_check(info, tty->name, "mgslpc_send_xchar"))
1701                return;
1702
1703        info->x_char = ch;
1704        if (ch) {
1705                spin_lock_irqsave(&info->lock, flags);
1706                if (!info->tx_enabled)
1707                        tx_start(info, tty);
1708                spin_unlock_irqrestore(&info->lock, flags);
1709        }
1710}
1711
1712/* Signal remote device to throttle send data (our receive data)
1713 */
1714static void mgslpc_throttle(struct tty_struct * tty)
1715{
1716        MGSLPC_INFO *info = (MGSLPC_INFO *)tty->driver_data;
1717        unsigned long flags;
1718
1719        if (debug_level >= DEBUG_LEVEL_INFO)
1720                printk("%s(%d):mgslpc_throttle(%s) entry\n",
1721                         __FILE__, __LINE__, info->device_name);
1722
1723        if (mgslpc_paranoia_check(info, tty->name, "mgslpc_throttle"))
1724                return;
1725
1726        if (I_IXOFF(tty))
1727                mgslpc_send_xchar(tty, STOP_CHAR(tty));
1728
1729        if (C_CRTSCTS(tty)) {
1730                spin_lock_irqsave(&info->lock, flags);
1731                info->serial_signals &= ~SerialSignal_RTS;
1732                set_signals(info);
1733                spin_unlock_irqrestore(&info->lock, flags);
1734        }
1735}
1736
1737/* Signal remote device to stop throttling send data (our receive data)
1738 */
1739static void mgslpc_unthrottle(struct tty_struct * tty)
1740{
1741        MGSLPC_INFO *info = (MGSLPC_INFO *)tty->driver_data;
1742        unsigned long flags;
1743
1744        if (debug_level >= DEBUG_LEVEL_INFO)
1745                printk("%s(%d):mgslpc_unthrottle(%s) entry\n",
1746                         __FILE__, __LINE__, info->device_name);
1747
1748        if (mgslpc_paranoia_check(info, tty->name, "mgslpc_unthrottle"))
1749                return;
1750
1751        if (I_IXOFF(tty)) {
1752                if (info->x_char)
1753                        info->x_char = 0;
1754                else
1755                        mgslpc_send_xchar(tty, START_CHAR(tty));
1756        }
1757
1758        if (C_CRTSCTS(tty)) {
1759                spin_lock_irqsave(&info->lock, flags);
1760                info->serial_signals |= SerialSignal_RTS;
1761                set_signals(info);
1762                spin_unlock_irqrestore(&info->lock, flags);
1763        }
1764}
1765
1766/* get the current serial statistics
1767 */
1768static int get_stats(MGSLPC_INFO * info, struct mgsl_icount __user *user_icount)
1769{
1770        int err;
1771        if (debug_level >= DEBUG_LEVEL_INFO)
1772                printk("get_params(%s)\n", info->device_name);
1773        if (!user_icount) {
1774                memset(&info->icount, 0, sizeof(info->icount));
1775        } else {
1776                COPY_TO_USER(err, user_icount, &info->icount, sizeof(struct mgsl_icount));
1777                if (err)
1778                        return -EFAULT;
1779        }
1780        return 0;
1781}
1782
1783/* get the current serial parameters
1784 */
1785static int get_params(MGSLPC_INFO * info, MGSL_PARAMS __user *user_params)
1786{
1787        int err;
1788        if (debug_level >= DEBUG_LEVEL_INFO)
1789                printk("get_params(%s)\n", info->device_name);
1790        COPY_TO_USER(err,user_params, &info->params, sizeof(MGSL_PARAMS));
1791        if (err)
1792                return -EFAULT;
1793        return 0;
1794}
1795
1796/* set the serial parameters
1797 *
1798 * Arguments:
1799 *
1800 *      info            pointer to device instance data
1801 *      new_params      user buffer containing new serial params
1802 *
1803 * Returns:     0 if success, otherwise error code
1804 */
1805static int set_params(MGSLPC_INFO * info, MGSL_PARAMS __user *new_params, struct tty_struct *tty)
1806{
1807        unsigned long flags;
1808        MGSL_PARAMS tmp_params;
1809        int err;
1810
1811        if (debug_level >= DEBUG_LEVEL_INFO)
1812                printk("%s(%d):set_params %s\n", __FILE__,__LINE__,
1813                        info->device_name);
1814        COPY_FROM_USER(err,&tmp_params, new_params, sizeof(MGSL_PARAMS));
1815        if (err) {
1816                if (debug_level >= DEBUG_LEVEL_INFO)
1817                        printk("%s(%d):set_params(%s) user buffer copy failed\n",
1818                                __FILE__, __LINE__, info->device_name);
1819                return -EFAULT;
1820        }
1821
1822        spin_lock_irqsave(&info->lock, flags);
1823        memcpy(&info->params,&tmp_params,sizeof(MGSL_PARAMS));
1824        spin_unlock_irqrestore(&info->lock, flags);
1825
1826        mgslpc_change_params(info, tty);
1827
1828        return 0;
1829}
1830
1831static int get_txidle(MGSLPC_INFO * info, int __user *idle_mode)
1832{
1833        int err;
1834        if (debug_level >= DEBUG_LEVEL_INFO)
1835                printk("get_txidle(%s)=%d\n", info->device_name, info->idle_mode);
1836        COPY_TO_USER(err,idle_mode, &info->idle_mode, sizeof(int));
1837        if (err)
1838                return -EFAULT;
1839        return 0;
1840}
1841
1842static int set_txidle(MGSLPC_INFO * info, int idle_mode)
1843{
1844        unsigned long flags;
1845        if (debug_level >= DEBUG_LEVEL_INFO)
1846                printk("set_txidle(%s,%d)\n", info->device_name, idle_mode);
1847        spin_lock_irqsave(&info->lock, flags);
1848        info->idle_mode = idle_mode;
1849        tx_set_idle(info);
1850        spin_unlock_irqrestore(&info->lock, flags);
1851        return 0;
1852}
1853
1854static int get_interface(MGSLPC_INFO * info, int __user *if_mode)
1855{
1856        int err;
1857        if (debug_level >= DEBUG_LEVEL_INFO)
1858                printk("get_interface(%s)=%d\n", info->device_name, info->if_mode);
1859        COPY_TO_USER(err,if_mode, &info->if_mode, sizeof(int));
1860        if (err)
1861                return -EFAULT;
1862        return 0;
1863}
1864
1865static int set_interface(MGSLPC_INFO * info, int if_mode)
1866{
1867        unsigned long flags;
1868        unsigned char val;
1869        if (debug_level >= DEBUG_LEVEL_INFO)
1870                printk("set_interface(%s,%d)\n", info->device_name, if_mode);
1871        spin_lock_irqsave(&info->lock, flags);
1872        info->if_mode = if_mode;
1873
1874        val = read_reg(info, PVR) & 0x0f;
1875        switch (info->if_mode)
1876        {
1877        case MGSL_INTERFACE_RS232: val |= PVR_RS232; break;
1878        case MGSL_INTERFACE_V35:   val |= PVR_V35;   break;
1879        case MGSL_INTERFACE_RS422: val |= PVR_RS422; break;
1880        }
1881        write_reg(info, PVR, val);
1882
1883        spin_unlock_irqrestore(&info->lock, flags);
1884        return 0;
1885}
1886
1887static int set_txenable(MGSLPC_INFO * info, int enable, struct tty_struct *tty)
1888{
1889        unsigned long flags;
1890
1891        if (debug_level >= DEBUG_LEVEL_INFO)
1892                printk("set_txenable(%s,%d)\n", info->device_name, enable);
1893
1894        spin_lock_irqsave(&info->lock, flags);
1895        if (enable) {
1896                if (!info->tx_enabled)
1897                        tx_start(info, tty);
1898        } else {
1899                if (info->tx_enabled)
1900                        tx_stop(info);
1901        }
1902        spin_unlock_irqrestore(&info->lock, flags);
1903        return 0;
1904}
1905
1906static int tx_abort(MGSLPC_INFO * info)
1907{
1908        unsigned long flags;
1909
1910        if (debug_level >= DEBUG_LEVEL_INFO)
1911                printk("tx_abort(%s)\n", info->device_name);
1912
1913        spin_lock_irqsave(&info->lock, flags);
1914        if (info->tx_active && info->tx_count &&
1915            info->params.mode == MGSL_MODE_HDLC) {
1916                /* clear data count so FIFO is not filled on next IRQ.
1917                 * This results in underrun and abort transmission.
1918                 */
1919                info->tx_count = info->tx_put = info->tx_get = 0;
1920                info->tx_aborting = true;
1921        }
1922        spin_unlock_irqrestore(&info->lock, flags);
1923        return 0;
1924}
1925
1926static int set_rxenable(MGSLPC_INFO * info, int enable)
1927{
1928        unsigned long flags;
1929
1930        if (debug_level >= DEBUG_LEVEL_INFO)
1931                printk("set_rxenable(%s,%d)\n", info->device_name, enable);
1932
1933        spin_lock_irqsave(&info->lock, flags);
1934        if (enable) {
1935                if (!info->rx_enabled)
1936                        rx_start(info);
1937        } else {
1938                if (info->rx_enabled)
1939                        rx_stop(info);
1940        }
1941        spin_unlock_irqrestore(&info->lock, flags);
1942        return 0;
1943}
1944
1945/* wait for specified event to occur
1946 *
1947 * Arguments:           info    pointer to device instance data
1948 *                      mask    pointer to bitmask of events to wait for
1949 * Return Value:        0       if successful and bit mask updated with
1950 *                              of events triggerred,
1951 *                      otherwise error code
1952 */
1953static int wait_events(MGSLPC_INFO * info, int __user *mask_ptr)
1954{
1955        unsigned long flags;
1956        int s;
1957        int rc=0;
1958        struct mgsl_icount cprev, cnow;
1959        int events;
1960        int mask;
1961        struct  _input_signal_events oldsigs, newsigs;
1962        DECLARE_WAITQUEUE(wait, current);
1963
1964        COPY_FROM_USER(rc,&mask, mask_ptr, sizeof(int));
1965        if (rc)
1966                return  -EFAULT;
1967
1968        if (debug_level >= DEBUG_LEVEL_INFO)
1969                printk("wait_events(%s,%d)\n", info->device_name, mask);
1970
1971        spin_lock_irqsave(&info->lock, flags);
1972
1973        /* return immediately if state matches requested events */
1974        get_signals(info);
1975        s = info->serial_signals;
1976        events = mask &
1977                ( ((s & SerialSignal_DSR) ? MgslEvent_DsrActive:MgslEvent_DsrInactive) +
1978                  ((s & SerialSignal_DCD) ? MgslEvent_DcdActive:MgslEvent_DcdInactive) +
1979                  ((s & SerialSignal_CTS) ? MgslEvent_CtsActive:MgslEvent_CtsInactive) +
1980                  ((s & SerialSignal_RI)  ? MgslEvent_RiActive :MgslEvent_RiInactive) );
1981        if (events) {
1982                spin_unlock_irqrestore(&info->lock, flags);
1983                goto exit;
1984        }
1985
1986        /* save current irq counts */
1987        cprev = info->icount;
1988        oldsigs = info->input_signal_events;
1989
1990        if ((info->params.mode == MGSL_MODE_HDLC) &&
1991            (mask & MgslEvent_ExitHuntMode))
1992                irq_enable(info, CHA, IRQ_EXITHUNT);
1993
1994        set_current_state(TASK_INTERRUPTIBLE);
1995        add_wait_queue(&info->event_wait_q, &wait);
1996
1997        spin_unlock_irqrestore(&info->lock, flags);
1998
1999
2000        for(;;) {
2001                schedule();
2002                if (signal_pending(current)) {
2003                        rc = -ERESTARTSYS;
2004                        break;
2005                }
2006
2007                /* get current irq counts */
2008                spin_lock_irqsave(&info->lock, flags);
2009                cnow = info->icount;
2010                newsigs = info->input_signal_events;
2011                set_current_state(TASK_INTERRUPTIBLE);
2012                spin_unlock_irqrestore(&info->lock, flags);
2013
2014                /* if no change, wait aborted for some reason */
2015                if (newsigs.dsr_up   == oldsigs.dsr_up   &&
2016                    newsigs.dsr_down == oldsigs.dsr_down &&
2017                    newsigs.dcd_up   == oldsigs.dcd_up   &&
2018                    newsigs.dcd_down == oldsigs.dcd_down &&
2019                    newsigs.cts_up   == oldsigs.cts_up   &&
2020                    newsigs.cts_down == oldsigs.cts_down &&
2021                    newsigs.ri_up    == oldsigs.ri_up    &&
2022                    newsigs.ri_down  == oldsigs.ri_down  &&
2023                    cnow.exithunt    == cprev.exithunt   &&
2024                    cnow.rxidle      == cprev.rxidle) {
2025                        rc = -EIO;
2026                        break;
2027                }
2028
2029                events = mask &
2030                        ( (newsigs.dsr_up   != oldsigs.dsr_up   ? MgslEvent_DsrActive:0)   +
2031                          (newsigs.dsr_down != oldsigs.dsr_down ? MgslEvent_DsrInactive:0) +
2032                          (newsigs.dcd_up   != oldsigs.dcd_up   ? MgslEvent_DcdActive:0)   +
2033                          (newsigs.dcd_down != oldsigs.dcd_down ? MgslEvent_DcdInactive:0) +
2034                          (newsigs.cts_up   != oldsigs.cts_up   ? MgslEvent_CtsActive:0)   +
2035                          (newsigs.cts_down != oldsigs.cts_down ? MgslEvent_CtsInactive:0) +
2036                          (newsigs.ri_up    != oldsigs.ri_up    ? MgslEvent_RiActive:0)    +
2037                          (newsigs.ri_down  != oldsigs.ri_down  ? MgslEvent_RiInactive:0)  +
2038                          (cnow.exithunt    != cprev.exithunt   ? MgslEvent_ExitHuntMode:0) +
2039                          (cnow.rxidle      != cprev.rxidle     ? MgslEvent_IdleReceived:0) );
2040                if (events)
2041                        break;
2042
2043                cprev = cnow;
2044                oldsigs = newsigs;
2045        }
2046
2047        remove_wait_queue(&info->event_wait_q, &wait);
2048        set_current_state(TASK_RUNNING);
2049
2050        if (mask & MgslEvent_ExitHuntMode) {
2051                spin_lock_irqsave(&info->lock, flags);
2052                if (!waitqueue_active(&info->event_wait_q))
2053                        irq_disable(info, CHA, IRQ_EXITHUNT);
2054                spin_unlock_irqrestore(&info->lock, flags);
2055        }
2056exit:
2057        if (rc == 0)
2058                PUT_USER(rc, events, mask_ptr);
2059        return rc;
2060}
2061
2062static int modem_input_wait(MGSLPC_INFO *info,int arg)
2063{
2064        unsigned long flags;
2065        int rc;
2066        struct mgsl_icount cprev, cnow;
2067        DECLARE_WAITQUEUE(wait, current);
2068
2069        /* save current irq counts */
2070        spin_lock_irqsave(&info->lock, flags);
2071        cprev = info->icount;
2072        add_wait_queue(&info->status_event_wait_q, &wait);
2073        set_current_state(TASK_INTERRUPTIBLE);
2074        spin_unlock_irqrestore(&info->lock, flags);
2075
2076        for(;;) {
2077                schedule();
2078                if (signal_pending(current)) {
2079                        rc = -ERESTARTSYS;
2080                        break;
2081                }
2082
2083                /* get new irq counts */
2084                spin_lock_irqsave(&info->lock, flags);
2085                cnow = info->icount;
2086                set_current_state(TASK_INTERRUPTIBLE);
2087                spin_unlock_irqrestore(&info->lock, flags);
2088
2089                /* if no change, wait aborted for some reason */
2090                if (cnow.rng == cprev.rng && cnow.dsr == cprev.dsr &&
2091                    cnow.dcd == cprev.dcd && cnow.cts == cprev.cts) {
2092                        rc = -EIO;
2093                        break;
2094                }
2095
2096                /* check for change in caller specified modem input */
2097                if ((arg & TIOCM_RNG && cnow.rng != cprev.rng) ||
2098                    (arg & TIOCM_DSR && cnow.dsr != cprev.dsr) ||
2099                    (arg & TIOCM_CD  && cnow.dcd != cprev.dcd) ||
2100                    (arg & TIOCM_CTS && cnow.cts != cprev.cts)) {
2101                        rc = 0;
2102                        break;
2103                }
2104
2105                cprev = cnow;
2106        }
2107        remove_wait_queue(&info->status_event_wait_q, &wait);
2108        set_current_state(TASK_RUNNING);
2109        return rc;
2110}
2111
2112/* return the state of the serial control and status signals
2113 */
2114static int tiocmget(struct tty_struct *tty)
2115{
2116        MGSLPC_INFO *info = (MGSLPC_INFO *)tty->driver_data;
2117        unsigned int result;
2118        unsigned long flags;
2119
2120        spin_lock_irqsave(&info->lock, flags);
2121        get_signals(info);
2122        spin_unlock_irqrestore(&info->lock, flags);
2123
2124        result = ((info->serial_signals & SerialSignal_RTS) ? TIOCM_RTS:0) +
2125                ((info->serial_signals & SerialSignal_DTR) ? TIOCM_DTR:0) +
2126                ((info->serial_signals & SerialSignal_DCD) ? TIOCM_CAR:0) +
2127                ((info->serial_signals & SerialSignal_RI)  ? TIOCM_RNG:0) +
2128                ((info->serial_signals & SerialSignal_DSR) ? TIOCM_DSR:0) +
2129                ((info->serial_signals & SerialSignal_CTS) ? TIOCM_CTS:0);
2130
2131        if (debug_level >= DEBUG_LEVEL_INFO)
2132                printk("%s(%d):%s tiocmget() value=%08X\n",
2133                         __FILE__, __LINE__, info->device_name, result);
2134        return result;
2135}
2136
2137/* set modem control signals (DTR/RTS)
2138 */
2139static int tiocmset(struct tty_struct *tty,
2140                    unsigned int set, unsigned int clear)
2141{
2142        MGSLPC_INFO *info = (MGSLPC_INFO *)tty->driver_data;
2143        unsigned long flags;
2144
2145        if (debug_level >= DEBUG_LEVEL_INFO)
2146                printk("%s(%d):%s tiocmset(%x,%x)\n",
2147                        __FILE__, __LINE__, info->device_name, set, clear);
2148
2149        if (set & TIOCM_RTS)
2150                info->serial_signals |= SerialSignal_RTS;
2151        if (set & TIOCM_DTR)
2152                info->serial_signals |= SerialSignal_DTR;
2153        if (clear & TIOCM_RTS)
2154                info->serial_signals &= ~SerialSignal_RTS;
2155        if (clear & TIOCM_DTR)
2156                info->serial_signals &= ~SerialSignal_DTR;
2157
2158        spin_lock_irqsave(&info->lock, flags);
2159        set_signals(info);
2160        spin_unlock_irqrestore(&info->lock, flags);
2161
2162        return 0;
2163}
2164
2165/* Set or clear transmit break condition
2166 *
2167 * Arguments:           tty             pointer to tty instance data
2168 *                      break_state     -1=set break condition, 0=clear
2169 */
2170static int mgslpc_break(struct tty_struct *tty, int break_state)
2171{
2172        MGSLPC_INFO * info = (MGSLPC_INFO *)tty->driver_data;
2173        unsigned long flags;
2174
2175        if (debug_level >= DEBUG_LEVEL_INFO)
2176                printk("%s(%d):mgslpc_break(%s,%d)\n",
2177                         __FILE__, __LINE__, info->device_name, break_state);
2178
2179        if (mgslpc_paranoia_check(info, tty->name, "mgslpc_break"))
2180                return -EINVAL;
2181
2182        spin_lock_irqsave(&info->lock, flags);
2183        if (break_state == -1)
2184                set_reg_bits(info, CHA+DAFO, BIT6);
2185        else
2186                clear_reg_bits(info, CHA+DAFO, BIT6);
2187        spin_unlock_irqrestore(&info->lock, flags);
2188        return 0;
2189}
2190
2191static int mgslpc_get_icount(struct tty_struct *tty,
2192                                struct serial_icounter_struct *icount)
2193{
2194        MGSLPC_INFO * info = (MGSLPC_INFO *)tty->driver_data;
2195        struct mgsl_icount cnow;        /* kernel counter temps */
2196        unsigned long flags;
2197
2198        spin_lock_irqsave(&info->lock, flags);
2199        cnow = info->icount;
2200        spin_unlock_irqrestore(&info->lock, flags);
2201
2202        icount->cts = cnow.cts;
2203        icount->dsr = cnow.dsr;
2204        icount->rng = cnow.rng;
2205        icount->dcd = cnow.dcd;
2206        icount->rx = cnow.rx;
2207        icount->tx = cnow.tx;
2208        icount->frame = cnow.frame;
2209        icount->overrun = cnow.overrun;
2210        icount->parity = cnow.parity;
2211        icount->brk = cnow.brk;
2212        icount->buf_overrun = cnow.buf_overrun;
2213
2214        return 0;
2215}
2216
2217/* Service an IOCTL request
2218 *
2219 * Arguments:
2220 *
2221 *      tty     pointer to tty instance data
2222 *      cmd     IOCTL command code
2223 *      arg     command argument/context
2224 *
2225 * Return Value:        0 if success, otherwise error code
2226 */
2227static int mgslpc_ioctl(struct tty_struct *tty,
2228                        unsigned int cmd, unsigned long arg)
2229{
2230        MGSLPC_INFO * info = (MGSLPC_INFO *)tty->driver_data;
2231        void __user *argp = (void __user *)arg;
2232
2233        if (debug_level >= DEBUG_LEVEL_INFO)
2234                printk("%s(%d):mgslpc_ioctl %s cmd=%08X\n", __FILE__, __LINE__,
2235                        info->device_name, cmd);
2236
2237        if (mgslpc_paranoia_check(info, tty->name, "mgslpc_ioctl"))
2238                return -ENODEV;
2239
2240        if ((cmd != TIOCGSERIAL) && (cmd != TIOCSSERIAL) &&
2241            (cmd != TIOCMIWAIT)) {
2242                if (tty_io_error(tty))
2243                    return -EIO;
2244        }
2245
2246        switch (cmd) {
2247        case MGSL_IOCGPARAMS:
2248                return get_params(info, argp);
2249        case MGSL_IOCSPARAMS:
2250                return set_params(info, argp, tty);
2251        case MGSL_IOCGTXIDLE:
2252                return get_txidle(info, argp);
2253        case MGSL_IOCSTXIDLE:
2254                return set_txidle(info, (int)arg);
2255        case MGSL_IOCGIF:
2256                return get_interface(info, argp);
2257        case MGSL_IOCSIF:
2258                return set_interface(info,(int)arg);
2259        case MGSL_IOCTXENABLE:
2260                return set_txenable(info,(int)arg, tty);
2261        case MGSL_IOCRXENABLE:
2262                return set_rxenable(info,(int)arg);
2263        case MGSL_IOCTXABORT:
2264                return tx_abort(info);
2265        case MGSL_IOCGSTATS:
2266                return get_stats(info, argp);
2267        case MGSL_IOCWAITEVENT:
2268                return wait_events(info, argp);
2269        case TIOCMIWAIT:
2270                return modem_input_wait(info,(int)arg);
2271        default:
2272                return -ENOIOCTLCMD;
2273        }
2274        return 0;
2275}
2276
2277/* Set new termios settings
2278 *
2279 * Arguments:
2280 *
2281 *      tty             pointer to tty structure
2282 *      termios         pointer to buffer to hold returned old termios
2283 */
2284static void mgslpc_set_termios(struct tty_struct *tty, struct ktermios *old_termios)
2285{
2286        MGSLPC_INFO *info = (MGSLPC_INFO *)tty->driver_data;
2287        unsigned long flags;
2288
2289        if (debug_level >= DEBUG_LEVEL_INFO)
2290                printk("%s(%d):mgslpc_set_termios %s\n", __FILE__, __LINE__,
2291                        tty->driver->name);
2292
2293        /* just return if nothing has changed */
2294        if ((tty->termios.c_cflag == old_termios->c_cflag)
2295            && (RELEVANT_IFLAG(tty->termios.c_iflag)
2296                == RELEVANT_IFLAG(old_termios->c_iflag)))
2297          return;
2298
2299        mgslpc_change_params(info, tty);
2300
2301        /* Handle transition to B0 status */
2302        if ((old_termios->c_cflag & CBAUD) && !C_BAUD(tty)) {
2303                info->serial_signals &= ~(SerialSignal_RTS | SerialSignal_DTR);
2304                spin_lock_irqsave(&info->lock, flags);
2305                set_signals(info);
2306                spin_unlock_irqrestore(&info->lock, flags);
2307        }
2308
2309        /* Handle transition away from B0 status */
2310        if (!(old_termios->c_cflag & CBAUD) && C_BAUD(tty)) {
2311                info->serial_signals |= SerialSignal_DTR;
2312                if (!C_CRTSCTS(tty) || !tty_throttled(tty))
2313                        info->serial_signals |= SerialSignal_RTS;
2314                spin_lock_irqsave(&info->lock, flags);
2315                set_signals(info);
2316                spin_unlock_irqrestore(&info->lock, flags);
2317        }
2318
2319        /* Handle turning off CRTSCTS */
2320        if (old_termios->c_cflag & CRTSCTS && !C_CRTSCTS(tty)) {
2321                tty->hw_stopped = 0;
2322                tx_release(tty);
2323        }
2324}
2325
2326static void mgslpc_close(struct tty_struct *tty, struct file * filp)
2327{
2328        MGSLPC_INFO * info = (MGSLPC_INFO *)tty->driver_data;
2329        struct tty_port *port = &info->port;
2330
2331        if (mgslpc_paranoia_check(info, tty->name, "mgslpc_close"))
2332                return;
2333
2334        if (debug_level >= DEBUG_LEVEL_INFO)
2335                printk("%s(%d):mgslpc_close(%s) entry, count=%d\n",
2336                         __FILE__, __LINE__, info->device_name, port->count);
2337
2338        if (tty_port_close_start(port, tty, filp) == 0)
2339                goto cleanup;
2340
2341        if (tty_port_initialized(port))
2342                mgslpc_wait_until_sent(tty, info->timeout);
2343
2344        mgslpc_flush_buffer(tty);
2345
2346        tty_ldisc_flush(tty);
2347        shutdown(info, tty);
2348        
2349        tty_port_close_end(port, tty);
2350        tty_port_tty_set(port, NULL);
2351cleanup:
2352        if (debug_level >= DEBUG_LEVEL_INFO)
2353                printk("%s(%d):mgslpc_close(%s) exit, count=%d\n", __FILE__, __LINE__,
2354                        tty->driver->name, port->count);
2355}
2356
2357/* Wait until the transmitter is empty.
2358 */
2359static void mgslpc_wait_until_sent(struct tty_struct *tty, int timeout)
2360{
2361        MGSLPC_INFO * info = (MGSLPC_INFO *)tty->driver_data;
2362        unsigned long orig_jiffies, char_time;
2363
2364        if (!info)
2365                return;
2366
2367        if (debug_level >= DEBUG_LEVEL_INFO)
2368                printk("%s(%d):mgslpc_wait_until_sent(%s) entry\n",
2369                         __FILE__, __LINE__, info->device_name);
2370
2371        if (mgslpc_paranoia_check(info, tty->name, "mgslpc_wait_until_sent"))
2372                return;
2373
2374        if (!tty_port_initialized(&info->port))
2375                goto exit;
2376
2377        orig_jiffies = jiffies;
2378
2379        /* Set check interval to 1/5 of estimated time to
2380         * send a character, and make it at least 1. The check
2381         * interval should also be less than the timeout.
2382         * Note: use tight timings here to satisfy the NIST-PCTS.
2383         */
2384
2385        if (info->params.data_rate) {
2386                char_time = info->timeout/(32 * 5);
2387                if (!char_time)
2388                        char_time++;
2389        } else
2390                char_time = 1;
2391
2392        if (timeout)
2393                char_time = min_t(unsigned long, char_time, timeout);
2394
2395        if (info->params.mode == MGSL_MODE_HDLC) {
2396                while (info->tx_active) {
2397                        msleep_interruptible(jiffies_to_msecs(char_time));
2398                        if (signal_pending(current))
2399                                break;
2400                        if (timeout && time_after(jiffies, orig_jiffies + timeout))
2401                                break;
2402                }
2403        } else {
2404                while ((info->tx_count || info->tx_active) &&
2405                        info->tx_enabled) {
2406                        msleep_interruptible(jiffies_to_msecs(char_time));
2407                        if (signal_pending(current))
2408                                break;
2409                        if (timeout && time_after(jiffies, orig_jiffies + timeout))
2410                                break;
2411                }
2412        }
2413
2414exit:
2415        if (debug_level >= DEBUG_LEVEL_INFO)
2416                printk("%s(%d):mgslpc_wait_until_sent(%s) exit\n",
2417                         __FILE__, __LINE__, info->device_name);
2418}
2419
2420/* Called by tty_hangup() when a hangup is signaled.
2421 * This is the same as closing all open files for the port.
2422 */
2423static void mgslpc_hangup(struct tty_struct *tty)
2424{
2425        MGSLPC_INFO * info = (MGSLPC_INFO *)tty->driver_data;
2426
2427        if (debug_level >= DEBUG_LEVEL_INFO)
2428                printk("%s(%d):mgslpc_hangup(%s)\n",
2429                         __FILE__, __LINE__, info->device_name);
2430
2431        if (mgslpc_paranoia_check(info, tty->name, "mgslpc_hangup"))
2432                return;
2433
2434        mgslpc_flush_buffer(tty);
2435        shutdown(info, tty);
2436        tty_port_hangup(&info->port);
2437}
2438
2439static int carrier_raised(struct tty_port *port)
2440{
2441        MGSLPC_INFO *info = container_of(port, MGSLPC_INFO, port);
2442        unsigned long flags;
2443
2444        spin_lock_irqsave(&info->lock, flags);
2445        get_signals(info);
2446        spin_unlock_irqrestore(&info->lock, flags);
2447
2448        if (info->serial_signals & SerialSignal_DCD)
2449                return 1;
2450        return 0;
2451}
2452
2453static void dtr_rts(struct tty_port *port, int onoff)
2454{
2455        MGSLPC_INFO *info = container_of(port, MGSLPC_INFO, port);
2456        unsigned long flags;
2457
2458        spin_lock_irqsave(&info->lock, flags);
2459        if (onoff)
2460                info->serial_signals |= SerialSignal_RTS | SerialSignal_DTR;
2461        else
2462                info->serial_signals &= ~(SerialSignal_RTS | SerialSignal_DTR);
2463        set_signals(info);
2464        spin_unlock_irqrestore(&info->lock, flags);
2465}
2466
2467
2468static int mgslpc_open(struct tty_struct *tty, struct file * filp)
2469{
2470        MGSLPC_INFO     *info;
2471        struct tty_port *port;
2472        int             retval, line;
2473        unsigned long   flags;
2474
2475        /* verify range of specified line number */
2476        line = tty->index;
2477        if (line >= mgslpc_device_count) {
2478                printk("%s(%d):mgslpc_open with invalid line #%d.\n",
2479                        __FILE__, __LINE__, line);
2480                return -ENODEV;
2481        }
2482
2483        /* find the info structure for the specified line */
2484        info = mgslpc_device_list;
2485        while(info && info->line != line)
2486                info = info->next_device;
2487        if (mgslpc_paranoia_check(info, tty->name, "mgslpc_open"))
2488                return -ENODEV;
2489
2490        port = &info->port;
2491        tty->driver_data = info;
2492        tty_port_tty_set(port, tty);
2493
2494        if (debug_level >= DEBUG_LEVEL_INFO)
2495                printk("%s(%d):mgslpc_open(%s), old ref count = %d\n",
2496                         __FILE__, __LINE__, tty->driver->name, port->count);
2497
2498        port->low_latency = (port->flags & ASYNC_LOW_LATENCY) ? 1 : 0;
2499
2500        spin_lock_irqsave(&info->netlock, flags);
2501        if (info->netcount) {
2502                retval = -EBUSY;
2503                spin_unlock_irqrestore(&info->netlock, flags);
2504                goto cleanup;
2505        }
2506        spin_lock(&port->lock);
2507        port->count++;
2508        spin_unlock(&port->lock);
2509        spin_unlock_irqrestore(&info->netlock, flags);
2510
2511        if (port->count == 1) {
2512                /* 1st open on this device, init hardware */
2513                retval = startup(info, tty);
2514                if (retval < 0)
2515                        goto cleanup;
2516        }
2517
2518        retval = tty_port_block_til_ready(&info->port, tty, filp);
2519        if (retval) {
2520                if (debug_level >= DEBUG_LEVEL_INFO)
2521                        printk("%s(%d):block_til_ready(%s) returned %d\n",
2522                                 __FILE__, __LINE__, info->device_name, retval);
2523                goto cleanup;
2524        }
2525
2526        if (debug_level >= DEBUG_LEVEL_INFO)
2527                printk("%s(%d):mgslpc_open(%s) success\n",
2528                         __FILE__, __LINE__, info->device_name);
2529        retval = 0;
2530
2531cleanup:
2532        return retval;
2533}
2534
2535/*
2536 * /proc fs routines....
2537 */
2538
2539static inline void line_info(struct seq_file *m, MGSLPC_INFO *info)
2540{
2541        char    stat_buf[30];
2542        unsigned long flags;
2543
2544        seq_printf(m, "%s:io:%04X irq:%d",
2545                      info->device_name, info->io_base, info->irq_level);
2546
2547        /* output current serial signal states */
2548        spin_lock_irqsave(&info->lock, flags);
2549        get_signals(info);
2550        spin_unlock_irqrestore(&info->lock, flags);
2551
2552        stat_buf[0] = 0;
2553        stat_buf[1] = 0;
2554        if (info->serial_signals & SerialSignal_RTS)
2555                strcat(stat_buf, "|RTS");
2556        if (info->serial_signals & SerialSignal_CTS)
2557                strcat(stat_buf, "|CTS");
2558        if (info->serial_signals & SerialSignal_DTR)
2559                strcat(stat_buf, "|DTR");
2560        if (info->serial_signals & SerialSignal_DSR)
2561                strcat(stat_buf, "|DSR");
2562        if (info->serial_signals & SerialSignal_DCD)
2563                strcat(stat_buf, "|CD");
2564        if (info->serial_signals & SerialSignal_RI)
2565                strcat(stat_buf, "|RI");
2566
2567        if (info->params.mode == MGSL_MODE_HDLC) {
2568                seq_printf(m, " HDLC txok:%d rxok:%d",
2569                              info->icount.txok, info->icount.rxok);
2570                if (info->icount.txunder)
2571                        seq_printf(m, " txunder:%d", info->icount.txunder);
2572                if (info->icount.txabort)
2573                        seq_printf(m, " txabort:%d", info->icount.txabort);
2574                if (info->icount.rxshort)
2575                        seq_printf(m, " rxshort:%d", info->icount.rxshort);
2576                if (info->icount.rxlong)
2577                        seq_printf(m, " rxlong:%d", info->icount.rxlong);
2578                if (info->icount.rxover)
2579                        seq_printf(m, " rxover:%d", info->icount.rxover);
2580                if (info->icount.rxcrc)
2581                        seq_printf(m, " rxcrc:%d", info->icount.rxcrc);
2582        } else {
2583                seq_printf(m, " ASYNC tx:%d rx:%d",
2584                              info->icount.tx, info->icount.rx);
2585                if (info->icount.frame)
2586                        seq_printf(m, " fe:%d", info->icount.frame);
2587                if (info->icount.parity)
2588                        seq_printf(m, " pe:%d", info->icount.parity);
2589                if (info->icount.brk)
2590                        seq_printf(m, " brk:%d", info->icount.brk);
2591                if (info->icount.overrun)
2592                        seq_printf(m, " oe:%d", info->icount.overrun);
2593        }
2594
2595        /* Append serial signal status to end */
2596        seq_printf(m, " %s\n", stat_buf+1);
2597
2598        seq_printf(m, "txactive=%d bh_req=%d bh_run=%d pending_bh=%x\n",
2599                       info->tx_active,info->bh_requested,info->bh_running,
2600                       info->pending_bh);
2601}
2602
2603/* Called to print information about devices
2604 */
2605static int mgslpc_proc_show(struct seq_file *m, void *v)
2606{
2607        MGSLPC_INFO *info;
2608
2609        seq_printf(m, "synclink driver:%s\n", driver_version);
2610
2611        info = mgslpc_device_list;
2612        while (info) {
2613                line_info(m, info);
2614                info = info->next_device;
2615        }
2616        return 0;
2617}
2618
2619static int rx_alloc_buffers(MGSLPC_INFO *info)
2620{
2621        /* each buffer has header and data */
2622        info->rx_buf_size = sizeof(RXBUF) + info->max_frame_size;
2623
2624        /* calculate total allocation size for 8 buffers */
2625        info->rx_buf_total_size = info->rx_buf_size * 8;
2626
2627        /* limit total allocated memory */
2628        if (info->rx_buf_total_size > 0x10000)
2629                info->rx_buf_total_size = 0x10000;
2630
2631        /* calculate number of buffers */
2632        info->rx_buf_count = info->rx_buf_total_size / info->rx_buf_size;
2633
2634        info->rx_buf = kmalloc(info->rx_buf_total_size, GFP_KERNEL);
2635        if (info->rx_buf == NULL)
2636                return -ENOMEM;
2637
2638        /* unused flag buffer to satisfy receive_buf calling interface */
2639        info->flag_buf = kzalloc(info->max_frame_size, GFP_KERNEL);
2640        if (!info->flag_buf) {
2641                kfree(info->rx_buf);
2642                info->rx_buf = NULL;
2643                return -ENOMEM;
2644        }
2645        
2646        rx_reset_buffers(info);
2647        return 0;
2648}
2649
2650static void rx_free_buffers(MGSLPC_INFO *info)
2651{
2652        kfree(info->rx_buf);
2653        info->rx_buf = NULL;
2654        kfree(info->flag_buf);
2655        info->flag_buf = NULL;
2656}
2657
2658static int claim_resources(MGSLPC_INFO *info)
2659{
2660        if (rx_alloc_buffers(info) < 0) {
2661                printk("Can't allocate rx buffer %s\n", info->device_name);
2662                release_resources(info);
2663                return -ENODEV;
2664        }
2665        return 0;
2666}
2667
2668static void release_resources(MGSLPC_INFO *info)
2669{
2670        if (debug_level >= DEBUG_LEVEL_INFO)
2671                printk("release_resources(%s)\n", info->device_name);
2672        rx_free_buffers(info);
2673}
2674
2675/* Add the specified device instance data structure to the
2676 * global linked list of devices and increment the device count.
2677 *
2678 * Arguments:           info    pointer to device instance data
2679 */
2680static int mgslpc_add_device(MGSLPC_INFO *info)
2681{
2682        MGSLPC_INFO *current_dev = NULL;
2683        struct device *tty_dev;
2684        int ret;
2685
2686        info->next_device = NULL;
2687        info->line = mgslpc_device_count;
2688        sprintf(info->device_name,"ttySLP%d",info->line);
2689
2690        if (info->line < MAX_DEVICE_COUNT) {
2691                if (maxframe[info->line])
2692                        info->max_frame_size = maxframe[info->line];
2693        }
2694
2695        mgslpc_device_count++;
2696
2697        if (!mgslpc_device_list)
2698                mgslpc_device_list = info;
2699        else {
2700                current_dev = mgslpc_device_list;
2701                while (current_dev->next_device)
2702                        current_dev = current_dev->next_device;
2703                current_dev->next_device = info;
2704        }
2705
2706        if (info->max_frame_size < 4096)
2707                info->max_frame_size = 4096;
2708        else if (info->max_frame_size > 65535)
2709                info->max_frame_size = 65535;
2710
2711        printk("SyncLink PC Card %s:IO=%04X IRQ=%d\n",
2712                info->device_name, info->io_base, info->irq_level);
2713
2714#if SYNCLINK_GENERIC_HDLC
2715        ret = hdlcdev_init(info);
2716        if (ret != 0)
2717                goto failed;
2718#endif
2719
2720        tty_dev = tty_port_register_device(&info->port, serial_driver, info->line,
2721                        &info->p_dev->dev);
2722        if (IS_ERR(tty_dev)) {
2723                ret = PTR_ERR(tty_dev);
2724#if SYNCLINK_GENERIC_HDLC
2725                hdlcdev_exit(info);
2726#endif
2727                goto failed;
2728        }
2729
2730        return 0;
2731
2732failed:
2733        if (current_dev)
2734                current_dev->next_device = NULL;
2735        else
2736                mgslpc_device_list = NULL;
2737        mgslpc_device_count--;
2738        return ret;
2739}
2740
2741static void mgslpc_remove_device(MGSLPC_INFO *remove_info)
2742{
2743        MGSLPC_INFO *info = mgslpc_device_list;
2744        MGSLPC_INFO *last = NULL;
2745
2746        while(info) {
2747                if (info == remove_info) {
2748                        if (last)
2749                                last->next_device = info->next_device;
2750                        else
2751                                mgslpc_device_list = info->next_device;
2752                        tty_unregister_device(serial_driver, info->line);
2753#if SYNCLINK_GENERIC_HDLC
2754                        hdlcdev_exit(info);
2755#endif
2756                        release_resources(info);
2757                        tty_port_destroy(&info->port);
2758                        kfree(info);
2759                        mgslpc_device_count--;
2760                        return;
2761                }
2762                last = info;
2763                info = info->next_device;
2764        }
2765}
2766
2767static const struct pcmcia_device_id mgslpc_ids[] = {
2768        PCMCIA_DEVICE_MANF_CARD(0x02c5, 0x0050),
2769        PCMCIA_DEVICE_NULL
2770};
2771MODULE_DEVICE_TABLE(pcmcia, mgslpc_ids);
2772
2773static struct pcmcia_driver mgslpc_driver = {
2774        .owner          = THIS_MODULE,
2775        .name           = "synclink_cs",
2776        .probe          = mgslpc_probe,
2777        .remove         = mgslpc_detach,
2778        .id_table       = mgslpc_ids,
2779        .suspend        = mgslpc_suspend,
2780        .resume         = mgslpc_resume,
2781};
2782
2783static const struct tty_operations mgslpc_ops = {
2784        .open = mgslpc_open,
2785        .close = mgslpc_close,
2786        .write = mgslpc_write,
2787        .put_char = mgslpc_put_char,
2788        .flush_chars = mgslpc_flush_chars,
2789        .write_room = mgslpc_write_room,
2790        .chars_in_buffer = mgslpc_chars_in_buffer,
2791        .flush_buffer = mgslpc_flush_buffer,
2792        .ioctl = mgslpc_ioctl,
2793        .throttle = mgslpc_throttle,
2794        .unthrottle = mgslpc_unthrottle,
2795        .send_xchar = mgslpc_send_xchar,
2796        .break_ctl = mgslpc_break,
2797        .wait_until_sent = mgslpc_wait_until_sent,
2798        .set_termios = mgslpc_set_termios,
2799        .stop = tx_pause,
2800        .start = tx_release,
2801        .hangup = mgslpc_hangup,
2802        .tiocmget = tiocmget,
2803        .tiocmset = tiocmset,
2804        .get_icount = mgslpc_get_icount,
2805        .proc_show = mgslpc_proc_show,
2806};
2807
2808static int __init synclink_cs_init(void)
2809{
2810        int rc;
2811
2812        if (break_on_load) {
2813                mgslpc_get_text_ptr();
2814                BREAKPOINT();
2815        }
2816
2817        serial_driver = tty_alloc_driver(MAX_DEVICE_COUNT,
2818                        TTY_DRIVER_REAL_RAW |
2819                        TTY_DRIVER_DYNAMIC_DEV);
2820        if (IS_ERR(serial_driver)) {
2821                rc = PTR_ERR(serial_driver);
2822                goto err;
2823        }
2824
2825        /* Initialize the tty_driver structure */
2826        serial_driver->driver_name = "synclink_cs";
2827        serial_driver->name = "ttySLP";
2828        serial_driver->major = ttymajor;
2829        serial_driver->minor_start = 64;
2830        serial_driver->type = TTY_DRIVER_TYPE_SERIAL;
2831        serial_driver->subtype = SERIAL_TYPE_NORMAL;
2832        serial_driver->init_termios = tty_std_termios;
2833        serial_driver->init_termios.c_cflag =
2834        B9600 | CS8 | CREAD | HUPCL | CLOCAL;
2835        tty_set_operations(serial_driver, &mgslpc_ops);
2836
2837        rc = tty_register_driver(serial_driver);
2838        if (rc < 0) {
2839                printk(KERN_ERR "%s(%d):Couldn't register serial driver\n",
2840                                __FILE__, __LINE__);
2841                goto err_put_tty;
2842        }
2843
2844        rc = pcmcia_register_driver(&mgslpc_driver);
2845        if (rc < 0)
2846                goto err_unreg_tty;
2847
2848        printk(KERN_INFO "%s %s, tty major#%d\n", driver_name, driver_version,
2849                        serial_driver->major);
2850
2851        return 0;
2852err_unreg_tty:
2853        tty_unregister_driver(serial_driver);
2854err_put_tty:
2855        put_tty_driver(serial_driver);
2856err:
2857        return rc;
2858}
2859
2860static void __exit synclink_cs_exit(void)
2861{
2862        pcmcia_unregister_driver(&mgslpc_driver);
2863        tty_unregister_driver(serial_driver);
2864        put_tty_driver(serial_driver);
2865}
2866
2867module_init(synclink_cs_init);
2868module_exit(synclink_cs_exit);
2869
2870static void mgslpc_set_rate(MGSLPC_INFO *info, unsigned char channel, unsigned int rate)
2871{
2872        unsigned int M, N;
2873        unsigned char val;
2874
2875        /* note:standard BRG mode is broken in V3.2 chip
2876         * so enhanced mode is always used
2877         */
2878
2879        if (rate) {
2880                N = 3686400 / rate;
2881                if (!N)
2882                        N = 1;
2883                N >>= 1;
2884                for (M = 1; N > 64 && M < 16; M++)
2885                        N >>= 1;
2886                N--;
2887
2888                /* BGR[5..0] = N
2889                 * BGR[9..6] = M
2890                 * BGR[7..0] contained in BGR register
2891                 * BGR[9..8] contained in CCR2[7..6]
2892                 * divisor = (N+1)*2^M
2893                 *
2894                 * Note: M *must* not be zero (causes asymetric duty cycle)
2895                 */
2896                write_reg(info, (unsigned char) (channel + BGR),
2897                                  (unsigned char) ((M << 6) + N));
2898                val = read_reg(info, (unsigned char) (channel + CCR2)) & 0x3f;
2899                val |= ((M << 4) & 0xc0);
2900                write_reg(info, (unsigned char) (channel + CCR2), val);
2901        }
2902}
2903
2904/* Enabled the AUX clock output at the specified frequency.
2905 */
2906static void enable_auxclk(MGSLPC_INFO *info)
2907{
2908        unsigned char val;
2909
2910        /* MODE
2911         *
2912         * 07..06  MDS[1..0] 10 = transparent HDLC mode
2913         * 05      ADM Address Mode, 0 = no addr recognition
2914         * 04      TMD Timer Mode, 0 = external
2915         * 03      RAC Receiver Active, 0 = inactive
2916         * 02      RTS 0=RTS active during xmit, 1=RTS always active
2917         * 01      TRS Timer Resolution, 1=512
2918         * 00      TLP Test Loop, 0 = no loop
2919         *
2920         * 1000 0010
2921         */
2922        val = 0x82;
2923
2924        /* channel B RTS is used to enable AUXCLK driver on SP505 */
2925        if (info->params.mode == MGSL_MODE_HDLC && info->params.clock_speed)
2926                val |= BIT2;
2927        write_reg(info, CHB + MODE, val);
2928
2929        /* CCR0
2930         *
2931         * 07      PU Power Up, 1=active, 0=power down
2932         * 06      MCE Master Clock Enable, 1=enabled
2933         * 05      Reserved, 0
2934         * 04..02  SC[2..0] Encoding
2935         * 01..00  SM[1..0] Serial Mode, 00=HDLC
2936         *
2937         * 11000000
2938         */
2939        write_reg(info, CHB + CCR0, 0xc0);
2940
2941        /* CCR1
2942         *
2943         * 07      SFLG Shared Flag, 0 = disable shared flags
2944         * 06      GALP Go Active On Loop, 0 = not used
2945         * 05      GLP Go On Loop, 0 = not used
2946         * 04      ODS Output Driver Select, 1=TxD is push-pull output
2947         * 03      ITF Interframe Time Fill, 0=mark, 1=flag
2948         * 02..00  CM[2..0] Clock Mode
2949         *
2950         * 0001 0111
2951         */
2952        write_reg(info, CHB + CCR1, 0x17);
2953
2954        /* CCR2 (Channel B)
2955         *
2956         * 07..06  BGR[9..8] Baud rate bits 9..8
2957         * 05      BDF Baud rate divisor factor, 0=1, 1=BGR value
2958         * 04      SSEL Clock source select, 1=submode b
2959         * 03      TOE 0=TxCLK is input, 1=TxCLK is output
2960         * 02      RWX Read/Write Exchange 0=disabled
2961         * 01      C32, CRC select, 0=CRC-16, 1=CRC-32
2962         * 00      DIV, data inversion 0=disabled, 1=enabled
2963         *
2964         * 0011 1000
2965         */
2966        if (info->params.mode == MGSL_MODE_HDLC && info->params.clock_speed)
2967                write_reg(info, CHB + CCR2, 0x38);
2968        else
2969                write_reg(info, CHB + CCR2, 0x30);
2970
2971        /* CCR4
2972         *
2973         * 07      MCK4 Master Clock Divide by 4, 1=enabled
2974         * 06      EBRG Enhanced Baud Rate Generator Mode, 1=enabled
2975         * 05      TST1 Test Pin, 0=normal operation
2976         * 04      ICD Ivert Carrier Detect, 1=enabled (active low)
2977         * 03..02  Reserved, must be 0
2978         * 01..00  RFT[1..0] RxFIFO Threshold 00=32 bytes
2979         *
2980         * 0101 0000
2981         */
2982        write_reg(info, CHB + CCR4, 0x50);
2983
2984        /* if auxclk not enabled, set internal BRG so
2985         * CTS transitions can be detected (requires TxC)
2986         */
2987        if (info->params.mode == MGSL_MODE_HDLC && info->params.clock_speed)
2988                mgslpc_set_rate(info, CHB, info->params.clock_speed);
2989        else
2990                mgslpc_set_rate(info, CHB, 921600);
2991}
2992
2993static void loopback_enable(MGSLPC_INFO *info)
2994{
2995        unsigned char val;
2996
2997        /* CCR1:02..00  CM[2..0] Clock Mode = 111 (clock mode 7) */
2998        val = read_reg(info, CHA + CCR1) | (BIT2 | BIT1 | BIT0);
2999        write_reg(info, CHA + CCR1, val);
3000
3001        /* CCR2:04 SSEL Clock source select, 1=submode b */
3002        val = read_reg(info, CHA + CCR2) | (BIT4 | BIT5);
3003        write_reg(info, CHA + CCR2, val);
3004
3005        /* set LinkSpeed if available, otherwise default to 2Mbps */
3006        if (info->params.clock_speed)
3007                mgslpc_set_rate(info, CHA, info->params.clock_speed);
3008        else
3009                mgslpc_set_rate(info, CHA, 1843200);
3010
3011        /* MODE:00 TLP Test Loop, 1=loopback enabled */
3012        val = read_reg(info, CHA + MODE) | BIT0;
3013        write_reg(info, CHA + MODE, val);
3014}
3015
3016static void hdlc_mode(MGSLPC_INFO *info)
3017{
3018        unsigned char val;
3019        unsigned char clkmode, clksubmode;
3020
3021        /* disable all interrupts */
3022        irq_disable(info, CHA, 0xffff);
3023        irq_disable(info, CHB, 0xffff);
3024        port_irq_disable(info, 0xff);
3025
3026        /* assume clock mode 0a, rcv=RxC xmt=TxC */
3027        clkmode = clksubmode = 0;
3028        if (info->params.flags & HDLC_FLAG_RXC_DPLL
3029            && info->params.flags & HDLC_FLAG_TXC_DPLL) {
3030                /* clock mode 7a, rcv = DPLL, xmt = DPLL */
3031                clkmode = 7;
3032        } else if (info->params.flags & HDLC_FLAG_RXC_BRG
3033                 && info->params.flags & HDLC_FLAG_TXC_BRG) {
3034                /* clock mode 7b, rcv = BRG, xmt = BRG */
3035                clkmode = 7;
3036                clksubmode = 1;
3037        } else if (info->params.flags & HDLC_FLAG_RXC_DPLL) {
3038                if (info->params.flags & HDLC_FLAG_TXC_BRG) {
3039                        /* clock mode 6b, rcv = DPLL, xmt = BRG/16 */
3040                        clkmode = 6;
3041                        clksubmode = 1;
3042                } else {
3043                        /* clock mode 6a, rcv = DPLL, xmt = TxC */
3044                        clkmode = 6;
3045                }
3046        } else if (info->params.flags & HDLC_FLAG_TXC_BRG) {
3047                /* clock mode 0b, rcv = RxC, xmt = BRG */
3048                clksubmode = 1;
3049        }
3050
3051        /* MODE
3052         *
3053         * 07..06  MDS[1..0] 10 = transparent HDLC mode
3054         * 05      ADM Address Mode, 0 = no addr recognition
3055         * 04      TMD Timer Mode, 0 = external
3056         * 03      RAC Receiver Active, 0 = inactive
3057         * 02      RTS 0=RTS active during xmit, 1=RTS always active
3058         * 01      TRS Timer Resolution, 1=512
3059         * 00      TLP Test Loop, 0 = no loop
3060         *
3061         * 1000 0010
3062         */
3063        val = 0x82;
3064        if (info->params.loopback)
3065                val |= BIT0;
3066
3067        /* preserve RTS state */
3068        if (info->serial_signals & SerialSignal_RTS)
3069                val |= BIT2;
3070        write_reg(info, CHA + MODE, val);
3071
3072        /* CCR0
3073         *
3074         * 07      PU Power Up, 1=active, 0=power down
3075         * 06      MCE Master Clock Enable, 1=enabled
3076         * 05      Reserved, 0
3077         * 04..02  SC[2..0] Encoding
3078         * 01..00  SM[1..0] Serial Mode, 00=HDLC
3079         *
3080         * 11000000
3081         */
3082        val = 0xc0;
3083        switch (info->params.encoding)
3084        {
3085        case HDLC_ENCODING_NRZI:
3086                val |= BIT3;
3087                break;
3088        case HDLC_ENCODING_BIPHASE_SPACE:
3089                val |= BIT4;
3090                break;          // FM0
3091        case HDLC_ENCODING_BIPHASE_MARK:
3092                val |= BIT4 | BIT2;
3093                break;          // FM1
3094        case HDLC_ENCODING_BIPHASE_LEVEL:
3095                val |= BIT4 | BIT3;
3096                break;          // Manchester
3097        }
3098        write_reg(info, CHA + CCR0, val);
3099
3100        /* CCR1
3101         *
3102         * 07      SFLG Shared Flag, 0 = disable shared flags
3103         * 06      GALP Go Active On Loop, 0 = not used
3104         * 05      GLP Go On Loop, 0 = not used
3105         * 04      ODS Output Driver Select, 1=TxD is push-pull output
3106         * 03      ITF Interframe Time Fill, 0=mark, 1=flag
3107         * 02..00  CM[2..0] Clock Mode
3108         *
3109         * 0001 0000
3110         */
3111        val = 0x10 + clkmode;
3112        write_reg(info, CHA + CCR1, val);
3113
3114        /* CCR2
3115         *
3116         * 07..06  BGR[9..8] Baud rate bits 9..8
3117         * 05      BDF Baud rate divisor factor, 0=1, 1=BGR value
3118         * 04      SSEL Clock source select, 1=submode b
3119         * 03      TOE 0=TxCLK is input, 0=TxCLK is input
3120         * 02      RWX Read/Write Exchange 0=disabled
3121         * 01      C32, CRC select, 0=CRC-16, 1=CRC-32
3122         * 00      DIV, data inversion 0=disabled, 1=enabled
3123         *
3124         * 0000 0000
3125         */
3126        val = 0x00;
3127        if (clkmode == 2 || clkmode == 3 || clkmode == 6
3128            || clkmode == 7 || (clkmode == 0 && clksubmode == 1))
3129                val |= BIT5;
3130        if (clksubmode)
3131                val |= BIT4;
3132        if (info->params.crc_type == HDLC_CRC_32_CCITT)
3133                val |= BIT1;
3134        if (info->params.encoding == HDLC_ENCODING_NRZB)
3135                val |= BIT0;
3136        write_reg(info, CHA + CCR2, val);
3137
3138        /* CCR3
3139         *
3140         * 07..06  PRE[1..0] Preamble count 00=1, 01=2, 10=4, 11=8
3141         * 05      EPT Enable preamble transmission, 1=enabled
3142         * 04      RADD Receive address pushed to FIFO, 0=disabled
3143         * 03      CRL CRC Reset Level, 0=FFFF
3144         * 02      RCRC Rx CRC 0=On 1=Off
3145         * 01      TCRC Tx CRC 0=On 1=Off
3146         * 00      PSD DPLL Phase Shift Disable
3147         *
3148         * 0000 0000
3149         */
3150        val = 0x00;
3151        if (info->params.crc_type == HDLC_CRC_NONE)
3152                val |= BIT2 | BIT1;
3153        if (info->params.preamble != HDLC_PREAMBLE_PATTERN_NONE)
3154                val |= BIT5;
3155        switch (info->params.preamble_length)
3156        {
3157        case HDLC_PREAMBLE_LENGTH_16BITS:
3158                val |= BIT6;
3159                break;
3160        case HDLC_PREAMBLE_LENGTH_32BITS:
3161                val |= BIT6;
3162                break;
3163        case HDLC_PREAMBLE_LENGTH_64BITS:
3164                val |= BIT7 | BIT6;
3165                break;
3166        }
3167        write_reg(info, CHA + CCR3, val);
3168
3169        /* PRE - Preamble pattern */
3170        val = 0;
3171        switch (info->params.preamble)
3172        {
3173        case HDLC_PREAMBLE_PATTERN_FLAGS: val = 0x7e; break;
3174        case HDLC_PREAMBLE_PATTERN_10:    val = 0xaa; break;
3175        case HDLC_PREAMBLE_PATTERN_01:    val = 0x55; break;
3176        case HDLC_PREAMBLE_PATTERN_ONES:  val = 0xff; break;
3177        }
3178        write_reg(info, CHA + PRE, val);
3179
3180        /* CCR4
3181         *
3182         * 07      MCK4 Master Clock Divide by 4, 1=enabled
3183         * 06      EBRG Enhanced Baud Rate Generator Mode, 1=enabled
3184         * 05      TST1 Test Pin, 0=normal operation
3185         * 04      ICD Ivert Carrier Detect, 1=enabled (active low)
3186         * 03..02  Reserved, must be 0
3187         * 01..00  RFT[1..0] RxFIFO Threshold 00=32 bytes
3188         *
3189         * 0101 0000
3190         */
3191        val = 0x50;
3192        write_reg(info, CHA + CCR4, val);
3193        if (info->params.flags & HDLC_FLAG_RXC_DPLL)
3194                mgslpc_set_rate(info, CHA, info->params.clock_speed * 16);
3195        else
3196                mgslpc_set_rate(info, CHA, info->params.clock_speed);
3197
3198        /* RLCR Receive length check register
3199         *
3200         * 7     1=enable receive length check
3201         * 6..0  Max frame length = (RL + 1) * 32
3202         */
3203        write_reg(info, CHA + RLCR, 0);
3204
3205        /* XBCH Transmit Byte Count High
3206         *
3207         * 07      DMA mode, 0 = interrupt driven
3208         * 06      NRM, 0=ABM (ignored)
3209         * 05      CAS Carrier Auto Start
3210         * 04      XC Transmit Continuously (ignored)
3211         * 03..00  XBC[10..8] Transmit byte count bits 10..8
3212         *
3213         * 0000 0000
3214         */
3215        val = 0x00;
3216        if (info->params.flags & HDLC_FLAG_AUTO_DCD)
3217                val |= BIT5;
3218        write_reg(info, CHA + XBCH, val);
3219        enable_auxclk(info);
3220        if (info->params.loopback || info->testing_irq)
3221                loopback_enable(info);
3222        if (info->params.flags & HDLC_FLAG_AUTO_CTS)
3223        {
3224                irq_enable(info, CHB, IRQ_CTS);
3225                /* PVR[3] 1=AUTO CTS active */
3226                set_reg_bits(info, CHA + PVR, BIT3);
3227        } else
3228                clear_reg_bits(info, CHA + PVR, BIT3);
3229
3230        irq_enable(info, CHA,
3231                         IRQ_RXEOM | IRQ_RXFIFO | IRQ_ALLSENT |
3232                         IRQ_UNDERRUN | IRQ_TXFIFO);
3233        issue_command(info, CHA, CMD_TXRESET + CMD_RXRESET);
3234        wait_command_complete(info, CHA);
3235        read_reg16(info, CHA + ISR);    /* clear pending IRQs */
3236
3237        /* Master clock mode enabled above to allow reset commands
3238         * to complete even if no data clocks are present.
3239         *
3240         * Disable master clock mode for normal communications because
3241         * V3.2 of the ESCC2 has a bug that prevents the transmit all sent
3242         * IRQ when in master clock mode.
3243         *
3244         * Leave master clock mode enabled for IRQ test because the
3245         * timer IRQ used by the test can only happen in master clock mode.
3246         */
3247        if (!info->testing_irq)
3248                clear_reg_bits(info, CHA + CCR0, BIT6);
3249
3250        tx_set_idle(info);
3251
3252        tx_stop(info);
3253        rx_stop(info);
3254}
3255
3256static void rx_stop(MGSLPC_INFO *info)
3257{
3258        if (debug_level >= DEBUG_LEVEL_ISR)
3259                printk("%s(%d):rx_stop(%s)\n",
3260                         __FILE__, __LINE__, info->device_name);
3261
3262        /* MODE:03 RAC Receiver Active, 0=inactive */
3263        clear_reg_bits(info, CHA + MODE, BIT3);
3264
3265        info->rx_enabled = false;
3266        info->rx_overflow = false;
3267}
3268
3269static void rx_start(MGSLPC_INFO *info)
3270{
3271        if (debug_level >= DEBUG_LEVEL_ISR)
3272                printk("%s(%d):rx_start(%s)\n",
3273                         __FILE__, __LINE__, info->device_name);
3274
3275        rx_reset_buffers(info);
3276        info->rx_enabled = false;
3277        info->rx_overflow = false;
3278
3279        /* MODE:03 RAC Receiver Active, 1=active */
3280        set_reg_bits(info, CHA + MODE, BIT3);
3281
3282        info->rx_enabled = true;
3283}
3284
3285static void tx_start(MGSLPC_INFO *info, struct tty_struct *tty)
3286{
3287        if (debug_level >= DEBUG_LEVEL_ISR)
3288                printk("%s(%d):tx_start(%s)\n",
3289                         __FILE__, __LINE__, info->device_name);
3290
3291        if (info->tx_count) {
3292                /* If auto RTS enabled and RTS is inactive, then assert */
3293                /* RTS and set a flag indicating that the driver should */
3294                /* negate RTS when the transmission completes. */
3295                info->drop_rts_on_tx_done = false;
3296
3297                if (info->params.flags & HDLC_FLAG_AUTO_RTS) {
3298                        get_signals(info);
3299                        if (!(info->serial_signals & SerialSignal_RTS)) {
3300                                info->serial_signals |= SerialSignal_RTS;
3301                                set_signals(info);
3302                                info->drop_rts_on_tx_done = true;
3303                        }
3304                }
3305
3306                if (info->params.mode == MGSL_MODE_ASYNC) {
3307                        if (!info->tx_active) {
3308                                info->tx_active = true;
3309                                tx_ready(info, tty);
3310                        }
3311                } else {
3312                        info->tx_active = true;
3313                        tx_ready(info, tty);
3314                        mod_timer(&info->tx_timer, jiffies +
3315                                        msecs_to_jiffies(5000));
3316                }
3317        }
3318
3319        if (!info->tx_enabled)
3320                info->tx_enabled = true;
3321}
3322
3323static void tx_stop(MGSLPC_INFO *info)
3324{
3325        if (debug_level >= DEBUG_LEVEL_ISR)
3326                printk("%s(%d):tx_stop(%s)\n",
3327                         __FILE__, __LINE__, info->device_name);
3328
3329        del_timer(&info->tx_timer);
3330
3331        info->tx_enabled = false;
3332        info->tx_active = false;
3333}
3334
3335/* Reset the adapter to a known state and prepare it for further use.
3336 */
3337static void reset_device(MGSLPC_INFO *info)
3338{
3339        /* power up both channels (set BIT7) */
3340        write_reg(info, CHA + CCR0, 0x80);
3341        write_reg(info, CHB + CCR0, 0x80);
3342        write_reg(info, CHA + MODE, 0);
3343        write_reg(info, CHB + MODE, 0);
3344
3345        /* disable all interrupts */
3346        irq_disable(info, CHA, 0xffff);
3347        irq_disable(info, CHB, 0xffff);
3348        port_irq_disable(info, 0xff);
3349
3350        /* PCR Port Configuration Register
3351         *
3352         * 07..04  DEC[3..0] Serial I/F select outputs
3353         * 03      output, 1=AUTO CTS control enabled
3354         * 02      RI Ring Indicator input 0=active
3355         * 01      DSR input 0=active
3356         * 00      DTR output 0=active
3357         *
3358         * 0000 0110
3359         */
3360        write_reg(info, PCR, 0x06);
3361
3362        /* PVR Port Value Register
3363         *
3364         * 07..04  DEC[3..0] Serial I/F select (0000=disabled)
3365         * 03      AUTO CTS output 1=enabled
3366         * 02      RI Ring Indicator input
3367         * 01      DSR input
3368         * 00      DTR output (1=inactive)
3369         *
3370         * 0000 0001
3371         */
3372//      write_reg(info, PVR, PVR_DTR);
3373
3374        /* IPC Interrupt Port Configuration
3375         *
3376         * 07      VIS 1=Masked interrupts visible
3377         * 06..05  Reserved, 0
3378         * 04..03  SLA Slave address, 00 ignored
3379         * 02      CASM Cascading Mode, 1=daisy chain
3380         * 01..00  IC[1..0] Interrupt Config, 01=push-pull output, active low
3381         *
3382         * 0000 0101
3383         */
3384        write_reg(info, IPC, 0x05);
3385}
3386
3387static void async_mode(MGSLPC_INFO *info)
3388{
3389        unsigned char val;
3390
3391        /* disable all interrupts */
3392        irq_disable(info, CHA, 0xffff);
3393        irq_disable(info, CHB, 0xffff);
3394        port_irq_disable(info, 0xff);
3395
3396        /* MODE
3397         *
3398         * 07      Reserved, 0
3399         * 06      FRTS RTS State, 0=active
3400         * 05      FCTS Flow Control on CTS
3401         * 04      FLON Flow Control Enable
3402         * 03      RAC Receiver Active, 0 = inactive
3403         * 02      RTS 0=Auto RTS, 1=manual RTS
3404         * 01      TRS Timer Resolution, 1=512
3405         * 00      TLP Test Loop, 0 = no loop
3406         *
3407         * 0000 0110
3408         */
3409        val = 0x06;
3410        if (info->params.loopback)
3411                val |= BIT0;
3412
3413        /* preserve RTS state */
3414        if (!(info->serial_signals & SerialSignal_RTS))
3415                val |= BIT6;
3416        write_reg(info, CHA + MODE, val);
3417
3418        /* CCR0
3419         *
3420         * 07      PU Power Up, 1=active, 0=power down
3421         * 06      MCE Master Clock Enable, 1=enabled
3422         * 05      Reserved, 0
3423         * 04..02  SC[2..0] Encoding, 000=NRZ
3424         * 01..00  SM[1..0] Serial Mode, 11=Async
3425         *
3426         * 1000 0011
3427         */
3428        write_reg(info, CHA + CCR0, 0x83);
3429
3430        /* CCR1
3431         *
3432         * 07..05  Reserved, 0
3433         * 04      ODS Output Driver Select, 1=TxD is push-pull output
3434         * 03      BCR Bit Clock Rate, 1=16x
3435         * 02..00  CM[2..0] Clock Mode, 111=BRG
3436         *
3437         * 0001 1111
3438         */
3439        write_reg(info, CHA + CCR1, 0x1f);
3440
3441        /* CCR2 (channel A)
3442         *
3443         * 07..06  BGR[9..8] Baud rate bits 9..8
3444         * 05      BDF Baud rate divisor factor, 0=1, 1=BGR value
3445         * 04      SSEL Clock source select, 1=submode b
3446         * 03      TOE 0=TxCLK is input, 0=TxCLK is input
3447         * 02      RWX Read/Write Exchange 0=disabled
3448         * 01      Reserved, 0
3449         * 00      DIV, data inversion 0=disabled, 1=enabled
3450         *
3451         * 0001 0000
3452         */
3453        write_reg(info, CHA + CCR2, 0x10);
3454
3455        /* CCR3
3456         *
3457         * 07..01  Reserved, 0
3458         * 00      PSD DPLL Phase Shift Disable
3459         *
3460         * 0000 0000
3461         */
3462        write_reg(info, CHA + CCR3, 0);
3463
3464        /* CCR4
3465         *
3466         * 07      MCK4 Master Clock Divide by 4, 1=enabled
3467         * 06      EBRG Enhanced Baud Rate Generator Mode, 1=enabled
3468         * 05      TST1 Test Pin, 0=normal operation
3469         * 04      ICD Ivert Carrier Detect, 1=enabled (active low)
3470         * 03..00  Reserved, must be 0
3471         *
3472         * 0101 0000
3473         */
3474        write_reg(info, CHA + CCR4, 0x50);
3475        mgslpc_set_rate(info, CHA, info->params.data_rate * 16);
3476
3477        /* DAFO Data Format
3478         *
3479         * 07      Reserved, 0
3480         * 06      XBRK transmit break, 0=normal operation
3481         * 05      Stop bits (0=1, 1=2)
3482         * 04..03  PAR[1..0] Parity (01=odd, 10=even)
3483         * 02      PAREN Parity Enable
3484         * 01..00  CHL[1..0] Character Length (00=8, 01=7)
3485         *
3486         */
3487        val = 0x00;
3488        if (info->params.data_bits != 8)
3489                val |= BIT0;    /* 7 bits */
3490        if (info->params.stop_bits != 1)
3491                val |= BIT5;
3492        if (info->params.parity != ASYNC_PARITY_NONE)
3493        {
3494                val |= BIT2;    /* Parity enable */
3495                if (info->params.parity == ASYNC_PARITY_ODD)
3496                        val |= BIT3;
3497                else
3498                        val |= BIT4;
3499        }
3500        write_reg(info, CHA + DAFO, val);
3501
3502        /* RFC Rx FIFO Control
3503         *
3504         * 07      Reserved, 0
3505         * 06      DPS, 1=parity bit not stored in data byte
3506         * 05      DXS, 0=all data stored in FIFO (including XON/XOFF)
3507         * 04      RFDF Rx FIFO Data Format, 1=status byte stored in FIFO
3508         * 03..02  RFTH[1..0], rx threshold, 11=16 status + 16 data byte
3509         * 01      Reserved, 0
3510         * 00      TCDE Terminate Char Detect Enable, 0=disabled
3511         *
3512         * 0101 1100
3513         */
3514        write_reg(info, CHA + RFC, 0x5c);
3515
3516        /* RLCR Receive length check register
3517         *
3518         * Max frame length = (RL + 1) * 32
3519         */
3520        write_reg(info, CHA + RLCR, 0);
3521
3522        /* XBCH Transmit Byte Count High
3523         *
3524         * 07      DMA mode, 0 = interrupt driven
3525         * 06      NRM, 0=ABM (ignored)
3526         * 05      CAS Carrier Auto Start
3527         * 04      XC Transmit Continuously (ignored)
3528         * 03..00  XBC[10..8] Transmit byte count bits 10..8
3529         *
3530         * 0000 0000
3531         */
3532        val = 0x00;
3533        if (info->params.flags & HDLC_FLAG_AUTO_DCD)
3534                val |= BIT5;
3535        write_reg(info, CHA + XBCH, val);
3536        if (info->params.flags & HDLC_FLAG_AUTO_CTS)
3537                irq_enable(info, CHA, IRQ_CTS);
3538
3539        /* MODE:03 RAC Receiver Active, 1=active */
3540        set_reg_bits(info, CHA + MODE, BIT3);
3541        enable_auxclk(info);
3542        if (info->params.flags & HDLC_FLAG_AUTO_CTS) {
3543                irq_enable(info, CHB, IRQ_CTS);
3544                /* PVR[3] 1=AUTO CTS active */
3545                set_reg_bits(info, CHA + PVR, BIT3);
3546        } else
3547                clear_reg_bits(info, CHA + PVR, BIT3);
3548        irq_enable(info, CHA,
3549                          IRQ_RXEOM | IRQ_RXFIFO | IRQ_BREAK_ON | IRQ_RXTIME |
3550                          IRQ_ALLSENT | IRQ_TXFIFO);
3551        issue_command(info, CHA, CMD_TXRESET + CMD_RXRESET);
3552        wait_command_complete(info, CHA);
3553        read_reg16(info, CHA + ISR);    /* clear pending IRQs */
3554}
3555
3556/* Set the HDLC idle mode for the transmitter.
3557 */
3558static void tx_set_idle(MGSLPC_INFO *info)
3559{
3560        /* Note: ESCC2 only supports flags and one idle modes */
3561        if (info->idle_mode == HDLC_TXIDLE_FLAGS)
3562                set_reg_bits(info, CHA + CCR1, BIT3);
3563        else
3564                clear_reg_bits(info, CHA + CCR1, BIT3);
3565}
3566
3567/* get state of the V24 status (input) signals.
3568 */
3569static void get_signals(MGSLPC_INFO *info)
3570{
3571        unsigned char status = 0;
3572
3573        /* preserve RTS and DTR */
3574        info->serial_signals &= SerialSignal_RTS | SerialSignal_DTR;
3575
3576        if (read_reg(info, CHB + VSTR) & BIT7)
3577                info->serial_signals |= SerialSignal_DCD;
3578        if (read_reg(info, CHB + STAR) & BIT1)
3579                info->serial_signals |= SerialSignal_CTS;
3580
3581        status = read_reg(info, CHA + PVR);
3582        if (!(status & PVR_RI))
3583                info->serial_signals |= SerialSignal_RI;
3584        if (!(status & PVR_DSR))
3585                info->serial_signals |= SerialSignal_DSR;
3586}
3587
3588/* Set the state of RTS and DTR based on contents of
3589 * serial_signals member of device extension.
3590 */
3591static void set_signals(MGSLPC_INFO *info)
3592{
3593        unsigned char val;
3594
3595        val = read_reg(info, CHA + MODE);
3596        if (info->params.mode == MGSL_MODE_ASYNC) {
3597                if (info->serial_signals & SerialSignal_RTS)
3598                        val &= ~BIT6;
3599                else
3600                        val |= BIT6;
3601        } else {
3602                if (info->serial_signals & SerialSignal_RTS)
3603                        val |= BIT2;
3604                else
3605                        val &= ~BIT2;
3606        }
3607        write_reg(info, CHA + MODE, val);
3608
3609        if (info->serial_signals & SerialSignal_DTR)
3610                clear_reg_bits(info, CHA + PVR, PVR_DTR);
3611        else
3612                set_reg_bits(info, CHA + PVR, PVR_DTR);
3613}
3614
3615static void rx_reset_buffers(MGSLPC_INFO *info)
3616{
3617        RXBUF *buf;
3618        int i;
3619
3620        info->rx_put = 0;
3621        info->rx_get = 0;
3622        info->rx_frame_count = 0;
3623        for (i=0 ; i < info->rx_buf_count ; i++) {
3624                buf = (RXBUF*)(info->rx_buf + (i * info->rx_buf_size));
3625                buf->status = buf->count = 0;
3626        }
3627}
3628
3629/* Attempt to return a received HDLC frame
3630 * Only frames received without errors are returned.
3631 *
3632 * Returns true if frame returned, otherwise false
3633 */
3634static bool rx_get_frame(MGSLPC_INFO *info, struct tty_struct *tty)
3635{
3636        unsigned short status;
3637        RXBUF *buf;
3638        unsigned int framesize = 0;
3639        unsigned long flags;
3640        bool return_frame = false;
3641
3642        if (info->rx_frame_count == 0)
3643                return false;
3644
3645        buf = (RXBUF*)(info->rx_buf + (info->rx_get * info->rx_buf_size));
3646
3647        status = buf->status;
3648
3649        /* 07  VFR  1=valid frame
3650         * 06  RDO  1=data overrun
3651         * 05  CRC  1=OK, 0=error
3652         * 04  RAB  1=frame aborted
3653         */
3654        if ((status & 0xf0) != 0xA0) {
3655                if (!(status & BIT7) || (status & BIT4))
3656                        info->icount.rxabort++;
3657                else if (status & BIT6)
3658                        info->icount.rxover++;
3659                else if (!(status & BIT5)) {
3660                        info->icount.rxcrc++;
3661                        if (info->params.crc_type & HDLC_CRC_RETURN_EX)
3662                                return_frame = true;
3663                }
3664                framesize = 0;
3665#if SYNCLINK_GENERIC_HDLC
3666                {
3667                        info->netdev->stats.rx_errors++;
3668                        info->netdev->stats.rx_frame_errors++;
3669                }
3670#endif
3671        } else
3672                return_frame = true;
3673
3674        if (return_frame)
3675                framesize = buf->count;
3676
3677        if (debug_level >= DEBUG_LEVEL_BH)
3678                printk("%s(%d):rx_get_frame(%s) status=%04X size=%d\n",
3679                        __FILE__, __LINE__, info->device_name, status, framesize);
3680
3681        if (debug_level >= DEBUG_LEVEL_DATA)
3682                trace_block(info, buf->data, framesize, 0);
3683
3684        if (framesize) {
3685                if ((info->params.crc_type & HDLC_CRC_RETURN_EX &&
3686                      framesize+1 > info->max_frame_size) ||
3687                    framesize > info->max_frame_size)
3688                        info->icount.rxlong++;
3689                else {
3690                        if (status & BIT5)
3691                                info->icount.rxok++;
3692
3693                        if (info->params.crc_type & HDLC_CRC_RETURN_EX) {
3694                                *(buf->data + framesize) = status & BIT5 ? RX_OK:RX_CRC_ERROR;
3695                                ++framesize;
3696                        }
3697
3698#if SYNCLINK_GENERIC_HDLC
3699                        if (info->netcount)
3700                                hdlcdev_rx(info, buf->data, framesize);
3701                        else
3702#endif
3703                                ldisc_receive_buf(tty, buf->data, info->flag_buf, framesize);
3704                }
3705        }
3706
3707        spin_lock_irqsave(&info->lock, flags);
3708        buf->status = buf->count = 0;
3709        info->rx_frame_count--;
3710        info->rx_get++;
3711        if (info->rx_get >= info->rx_buf_count)
3712                info->rx_get = 0;
3713        spin_unlock_irqrestore(&info->lock, flags);
3714
3715        return true;
3716}
3717
3718static bool register_test(MGSLPC_INFO *info)
3719{
3720        static unsigned char patterns[] =
3721            { 0x00, 0xff, 0xaa, 0x55, 0x69, 0x96, 0x0f };
3722        static unsigned int count = ARRAY_SIZE(patterns);
3723        unsigned int i;
3724        bool rc = true;
3725        unsigned long flags;
3726
3727        spin_lock_irqsave(&info->lock, flags);
3728        reset_device(info);
3729
3730        for (i = 0; i < count; i++) {
3731                write_reg(info, XAD1, patterns[i]);
3732                write_reg(info, XAD2, patterns[(i + 1) % count]);
3733                if ((read_reg(info, XAD1) != patterns[i]) ||
3734                    (read_reg(info, XAD2) != patterns[(i + 1) % count])) {
3735                        rc = false;
3736                        break;
3737                }
3738        }
3739
3740        spin_unlock_irqrestore(&info->lock, flags);
3741        return rc;
3742}
3743
3744static bool irq_test(MGSLPC_INFO *info)
3745{
3746        unsigned long end_time;
3747        unsigned long flags;
3748
3749        spin_lock_irqsave(&info->lock, flags);
3750        reset_device(info);
3751
3752        info->testing_irq = true;
3753        hdlc_mode(info);
3754
3755        info->irq_occurred = false;
3756
3757        /* init hdlc mode */
3758
3759        irq_enable(info, CHA, IRQ_TIMER);
3760        write_reg(info, CHA + TIMR, 0); /* 512 cycles */
3761        issue_command(info, CHA, CMD_START_TIMER);
3762
3763        spin_unlock_irqrestore(&info->lock, flags);
3764
3765        end_time=100;
3766        while(end_time-- && !info->irq_occurred) {
3767                msleep_interruptible(10);
3768        }
3769
3770        info->testing_irq = false;
3771
3772        spin_lock_irqsave(&info->lock, flags);
3773        reset_device(info);
3774        spin_unlock_irqrestore(&info->lock, flags);
3775
3776        return info->irq_occurred;
3777}
3778
3779static int adapter_test(MGSLPC_INFO *info)
3780{
3781        if (!register_test(info)) {
3782                info->init_error = DiagStatus_AddressFailure;
3783                printk("%s(%d):Register test failure for device %s Addr=%04X\n",
3784                        __FILE__, __LINE__, info->device_name, (unsigned short)(info->io_base));
3785                return -ENODEV;
3786        }
3787
3788        if (!irq_test(info)) {
3789                info->init_error = DiagStatus_IrqFailure;
3790                printk("%s(%d):Interrupt test failure for device %s IRQ=%d\n",
3791                        __FILE__, __LINE__, info->device_name, (unsigned short)(info->irq_level));
3792                return -ENODEV;
3793        }
3794
3795        if (debug_level >= DEBUG_LEVEL_INFO)
3796                printk("%s(%d):device %s passed diagnostics\n",
3797                        __FILE__, __LINE__, info->device_name);
3798        return 0;
3799}
3800
3801static void trace_block(MGSLPC_INFO *info,const char* data, int count, int xmit)
3802{
3803        int i;
3804        int linecount;
3805        if (xmit)
3806                printk("%s tx data:\n", info->device_name);
3807        else
3808                printk("%s rx data:\n", info->device_name);
3809
3810        while(count) {
3811                if (count > 16)
3812                        linecount = 16;
3813                else
3814                        linecount = count;
3815
3816                for(i=0;i<linecount;i++)
3817                        printk("%02X ", (unsigned char)data[i]);
3818                for(;i<17;i++)
3819                        printk("   ");
3820                for(i=0;i<linecount;i++) {
3821                        if (data[i]>=040 && data[i]<=0176)
3822                                printk("%c", data[i]);
3823                        else
3824                                printk(".");
3825                }
3826                printk("\n");
3827
3828                data  += linecount;
3829                count -= linecount;
3830        }
3831}
3832
3833/* HDLC frame time out
3834 * update stats and do tx completion processing
3835 */
3836static void tx_timeout(struct timer_list *t)
3837{
3838        MGSLPC_INFO *info = from_timer(info, t, tx_timer);
3839        unsigned long flags;
3840
3841        if (debug_level >= DEBUG_LEVEL_INFO)
3842                printk("%s(%d):tx_timeout(%s)\n",
3843                        __FILE__, __LINE__, info->device_name);
3844        if (info->tx_active &&
3845            info->params.mode == MGSL_MODE_HDLC) {
3846                info->icount.txtimeout++;
3847        }
3848        spin_lock_irqsave(&info->lock, flags);
3849        info->tx_active = false;
3850        info->tx_count = info->tx_put = info->tx_get = 0;
3851
3852        spin_unlock_irqrestore(&info->lock, flags);
3853
3854#if SYNCLINK_GENERIC_HDLC
3855        if (info->netcount)
3856                hdlcdev_tx_done(info);
3857        else
3858#endif
3859        {
3860                struct tty_struct *tty = tty_port_tty_get(&info->port);
3861                bh_transmit(info, tty);
3862                tty_kref_put(tty);
3863        }
3864}
3865
3866#if SYNCLINK_GENERIC_HDLC
3867
3868/**
3869 * called by generic HDLC layer when protocol selected (PPP, frame relay, etc.)
3870 * set encoding and frame check sequence (FCS) options
3871 *
3872 * dev       pointer to network device structure
3873 * encoding  serial encoding setting
3874 * parity    FCS setting
3875 *
3876 * returns 0 if success, otherwise error code
3877 */
3878static int hdlcdev_attach(struct net_device *dev, unsigned short encoding,
3879                          unsigned short parity)
3880{
3881        MGSLPC_INFO *info = dev_to_port(dev);
3882        struct tty_struct *tty;
3883        unsigned char  new_encoding;
3884        unsigned short new_crctype;
3885
3886        /* return error if TTY interface open */
3887        if (info->port.count)
3888                return -EBUSY;
3889
3890        switch (encoding)
3891        {
3892        case ENCODING_NRZ:        new_encoding = HDLC_ENCODING_NRZ; break;
3893        case ENCODING_NRZI:       new_encoding = HDLC_ENCODING_NRZI_SPACE; break;
3894        case ENCODING_FM_MARK:    new_encoding = HDLC_ENCODING_BIPHASE_MARK; break;
3895        case ENCODING_FM_SPACE:   new_encoding = HDLC_ENCODING_BIPHASE_SPACE; break;
3896        case ENCODING_MANCHESTER: new_encoding = HDLC_ENCODING_BIPHASE_LEVEL; break;
3897        default: return -EINVAL;
3898        }
3899
3900        switch (parity)
3901        {
3902        case PARITY_NONE:            new_crctype = HDLC_CRC_NONE; break;
3903        case PARITY_CRC16_PR1_CCITT: new_crctype = HDLC_CRC_16_CCITT; break;
3904        case PARITY_CRC32_PR1_CCITT: new_crctype = HDLC_CRC_32_CCITT; break;
3905        default: return -EINVAL;
3906        }
3907
3908        info->params.encoding = new_encoding;
3909        info->params.crc_type = new_crctype;
3910
3911        /* if network interface up, reprogram hardware */
3912        if (info->netcount) {
3913                tty = tty_port_tty_get(&info->port);
3914                mgslpc_program_hw(info, tty);
3915                tty_kref_put(tty);
3916        }
3917
3918        return 0;
3919}
3920
3921/**
3922 * called by generic HDLC layer to send frame
3923 *
3924 * skb  socket buffer containing HDLC frame
3925 * dev  pointer to network device structure
3926 */
3927static netdev_tx_t hdlcdev_xmit(struct sk_buff *skb,
3928                                      struct net_device *dev)
3929{
3930        MGSLPC_INFO *info = dev_to_port(dev);
3931        unsigned long flags;
3932
3933        if (debug_level >= DEBUG_LEVEL_INFO)
3934                printk(KERN_INFO "%s:hdlc_xmit(%s)\n", __FILE__, dev->name);
3935
3936        /* stop sending until this frame completes */
3937        netif_stop_queue(dev);
3938
3939        /* copy data to device buffers */
3940        skb_copy_from_linear_data(skb, info->tx_buf, skb->len);
3941        info->tx_get = 0;
3942        info->tx_put = info->tx_count = skb->len;
3943
3944        /* update network statistics */
3945        dev->stats.tx_packets++;
3946        dev->stats.tx_bytes += skb->len;
3947
3948        /* done with socket buffer, so free it */
3949        dev_kfree_skb(skb);
3950
3951        /* save start time for transmit timeout detection */
3952        netif_trans_update(dev);
3953
3954        /* start hardware transmitter if necessary */
3955        spin_lock_irqsave(&info->lock, flags);
3956        if (!info->tx_active) {
3957                struct tty_struct *tty = tty_port_tty_get(&info->port);
3958                tx_start(info, tty);
3959                tty_kref_put(tty);
3960        }
3961        spin_unlock_irqrestore(&info->lock, flags);
3962
3963        return NETDEV_TX_OK;
3964}
3965
3966/**
3967 * called by network layer when interface enabled
3968 * claim resources and initialize hardware
3969 *
3970 * dev  pointer to network device structure
3971 *
3972 * returns 0 if success, otherwise error code
3973 */
3974static int hdlcdev_open(struct net_device *dev)
3975{
3976        MGSLPC_INFO *info = dev_to_port(dev);
3977        struct tty_struct *tty;
3978        int rc;
3979        unsigned long flags;
3980
3981        if (debug_level >= DEBUG_LEVEL_INFO)
3982                printk("%s:hdlcdev_open(%s)\n", __FILE__, dev->name);
3983
3984        /* generic HDLC layer open processing */
3985        rc = hdlc_open(dev);
3986        if (rc != 0)
3987                return rc;
3988
3989        /* arbitrate between network and tty opens */
3990        spin_lock_irqsave(&info->netlock, flags);
3991        if (info->port.count != 0 || info->netcount != 0) {
3992                printk(KERN_WARNING "%s: hdlc_open returning busy\n", dev->name);
3993                spin_unlock_irqrestore(&info->netlock, flags);
3994                return -EBUSY;
3995        }
3996        info->netcount=1;
3997        spin_unlock_irqrestore(&info->netlock, flags);
3998
3999        tty = tty_port_tty_get(&info->port);
4000        /* claim resources and init adapter */
4001        rc = startup(info, tty);
4002        if (rc != 0) {
4003                tty_kref_put(tty);
4004                spin_lock_irqsave(&info->netlock, flags);
4005                info->netcount=0;
4006                spin_unlock_irqrestore(&info->netlock, flags);
4007                return rc;
4008        }
4009        /* assert RTS and DTR, apply hardware settings */
4010        info->serial_signals |= SerialSignal_RTS | SerialSignal_DTR;
4011        mgslpc_program_hw(info, tty);
4012        tty_kref_put(tty);
4013
4014        /* enable network layer transmit */
4015        netif_trans_update(dev);
4016        netif_start_queue(dev);
4017
4018        /* inform generic HDLC layer of current DCD status */
4019        spin_lock_irqsave(&info->lock, flags);
4020        get_signals(info);
4021        spin_unlock_irqrestore(&info->lock, flags);
4022        if (info->serial_signals & SerialSignal_DCD)
4023                netif_carrier_on(dev);
4024        else
4025                netif_carrier_off(dev);
4026        return 0;
4027}
4028
4029/**
4030 * called by network layer when interface is disabled
4031 * shutdown hardware and release resources
4032 *
4033 * dev  pointer to network device structure
4034 *
4035 * returns 0 if success, otherwise error code
4036 */
4037static int hdlcdev_close(struct net_device *dev)
4038{
4039        MGSLPC_INFO *info = dev_to_port(dev);
4040        struct tty_struct *tty = tty_port_tty_get(&info->port);
4041        unsigned long flags;
4042
4043        if (debug_level >= DEBUG_LEVEL_INFO)
4044                printk("%s:hdlcdev_close(%s)\n", __FILE__, dev->name);
4045
4046        netif_stop_queue(dev);
4047
4048        /* shutdown adapter and release resources */
4049        shutdown(info, tty);
4050        tty_kref_put(tty);
4051        hdlc_close(dev);
4052
4053        spin_lock_irqsave(&info->netlock, flags);
4054        info->netcount=0;
4055        spin_unlock_irqrestore(&info->netlock, flags);
4056
4057        return 0;
4058}
4059
4060/**
4061 * called by network layer to process IOCTL call to network device
4062 *
4063 * dev  pointer to network device structure
4064 * ifr  pointer to network interface request structure
4065 * cmd  IOCTL command code
4066 *
4067 * returns 0 if success, otherwise error code
4068 */
4069static int hdlcdev_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
4070{
4071        const size_t size = sizeof(sync_serial_settings);
4072        sync_serial_settings new_line;
4073        sync_serial_settings __user *line = ifr->ifr_settings.ifs_ifsu.sync;
4074        MGSLPC_INFO *info = dev_to_port(dev);
4075        unsigned int flags;
4076
4077        if (debug_level >= DEBUG_LEVEL_INFO)
4078                printk("%s:hdlcdev_ioctl(%s)\n", __FILE__, dev->name);
4079
4080        /* return error if TTY interface open */
4081        if (info->port.count)
4082                return -EBUSY;
4083
4084        if (cmd != SIOCWANDEV)
4085                return hdlc_ioctl(dev, ifr, cmd);
4086
4087        memset(&new_line, 0, size);
4088
4089        switch(ifr->ifr_settings.type) {
4090        case IF_GET_IFACE: /* return current sync_serial_settings */
4091
4092                ifr->ifr_settings.type = IF_IFACE_SYNC_SERIAL;
4093                if (ifr->ifr_settings.size < size) {
4094                        ifr->ifr_settings.size = size; /* data size wanted */
4095                        return -ENOBUFS;
4096                }
4097
4098                flags = info->params.flags & (HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_RXC_DPLL |
4099                                              HDLC_FLAG_RXC_BRG    | HDLC_FLAG_RXC_TXCPIN |
4100                                              HDLC_FLAG_TXC_TXCPIN | HDLC_FLAG_TXC_DPLL |
4101                                              HDLC_FLAG_TXC_BRG    | HDLC_FLAG_TXC_RXCPIN);
4102
4103                switch (flags){
4104                case (HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_TXCPIN): new_line.clock_type = CLOCK_EXT; break;
4105                case (HDLC_FLAG_RXC_BRG    | HDLC_FLAG_TXC_BRG):    new_line.clock_type = CLOCK_INT; break;
4106                case (HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_BRG):    new_line.clock_type = CLOCK_TXINT; break;
4107                case (HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_RXCPIN): new_line.clock_type = CLOCK_TXFROMRX; break;
4108                default: new_line.clock_type = CLOCK_DEFAULT;
4109                }
4110
4111                new_line.clock_rate = info->params.clock_speed;
4112                new_line.loopback   = info->params.loopback ? 1:0;
4113
4114                if (copy_to_user(line, &new_line, size))
4115                        return -EFAULT;
4116                return 0;
4117
4118        case IF_IFACE_SYNC_SERIAL: /* set sync_serial_settings */
4119
4120                if(!capable(CAP_NET_ADMIN))
4121                        return -EPERM;
4122                if (copy_from_user(&new_line, line, size))
4123                        return -EFAULT;
4124
4125                switch (new_line.clock_type)
4126                {
4127                case CLOCK_EXT:      flags = HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_TXCPIN; break;
4128                case CLOCK_TXFROMRX: flags = HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_RXCPIN; break;
4129                case CLOCK_INT:      flags = HDLC_FLAG_RXC_BRG    | HDLC_FLAG_TXC_BRG;    break;
4130                case CLOCK_TXINT:    flags = HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_BRG;    break;
4131                case CLOCK_DEFAULT:  flags = info->params.flags &
4132                                             (HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_RXC_DPLL |
4133                                              HDLC_FLAG_RXC_BRG    | HDLC_FLAG_RXC_TXCPIN |
4134                                              HDLC_FLAG_TXC_TXCPIN | HDLC_FLAG_TXC_DPLL |
4135                                              HDLC_FLAG_TXC_BRG    | HDLC_FLAG_TXC_RXCPIN); break;
4136                default: return -EINVAL;
4137                }
4138
4139                if (new_line.loopback != 0 && new_line.loopback != 1)
4140                        return -EINVAL;
4141
4142                info->params.flags &= ~(HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_RXC_DPLL |
4143                                        HDLC_FLAG_RXC_BRG    | HDLC_FLAG_RXC_TXCPIN |
4144                                        HDLC_FLAG_TXC_TXCPIN | HDLC_FLAG_TXC_DPLL |
4145                                        HDLC_FLAG_TXC_BRG    | HDLC_FLAG_TXC_RXCPIN);
4146                info->params.flags |= flags;
4147
4148                info->params.loopback = new_line.loopback;
4149
4150                if (flags & (HDLC_FLAG_RXC_BRG | HDLC_FLAG_TXC_BRG))
4151                        info->params.clock_speed = new_line.clock_rate;
4152                else
4153                        info->params.clock_speed = 0;
4154
4155                /* if network interface up, reprogram hardware */
4156                if (info->netcount) {
4157                        struct tty_struct *tty = tty_port_tty_get(&info->port);
4158                        mgslpc_program_hw(info, tty);
4159                        tty_kref_put(tty);
4160                }
4161                return 0;
4162
4163        default:
4164                return hdlc_ioctl(dev, ifr, cmd);
4165        }
4166}
4167
4168/**
4169 * called by network layer when transmit timeout is detected
4170 *
4171 * dev  pointer to network device structure
4172 */
4173static void hdlcdev_tx_timeout(struct net_device *dev)
4174{
4175        MGSLPC_INFO *info = dev_to_port(dev);
4176        unsigned long flags;
4177
4178        if (debug_level >= DEBUG_LEVEL_INFO)
4179                printk("hdlcdev_tx_timeout(%s)\n", dev->name);
4180
4181        dev->stats.tx_errors++;
4182        dev->stats.tx_aborted_errors++;
4183
4184        spin_lock_irqsave(&info->lock, flags);
4185        tx_stop(info);
4186        spin_unlock_irqrestore(&info->lock, flags);
4187
4188        netif_wake_queue(dev);
4189}
4190
4191/**
4192 * called by device driver when transmit completes
4193 * reenable network layer transmit if stopped
4194 *
4195 * info  pointer to device instance information
4196 */
4197static void hdlcdev_tx_done(MGSLPC_INFO *info)
4198{
4199        if (netif_queue_stopped(info->netdev))
4200                netif_wake_queue(info->netdev);
4201}
4202
4203/**
4204 * called by device driver when frame received
4205 * pass frame to network layer
4206 *
4207 * info  pointer to device instance information
4208 * buf   pointer to buffer contianing frame data
4209 * size  count of data bytes in buf
4210 */
4211static void hdlcdev_rx(MGSLPC_INFO *info, char *buf, int size)
4212{
4213        struct sk_buff *skb = dev_alloc_skb(size);
4214        struct net_device *dev = info->netdev;
4215
4216        if (debug_level >= DEBUG_LEVEL_INFO)
4217                printk("hdlcdev_rx(%s)\n", dev->name);
4218
4219        if (skb == NULL) {
4220                printk(KERN_NOTICE "%s: can't alloc skb, dropping packet\n", dev->name);
4221                dev->stats.rx_dropped++;
4222                return;
4223        }
4224
4225        skb_put_data(skb, buf, size);
4226
4227        skb->protocol = hdlc_type_trans(skb, dev);
4228
4229        dev->stats.rx_packets++;
4230        dev->stats.rx_bytes += size;
4231
4232        netif_rx(skb);
4233}
4234
4235static const struct net_device_ops hdlcdev_ops = {
4236        .ndo_open       = hdlcdev_open,
4237        .ndo_stop       = hdlcdev_close,
4238        .ndo_start_xmit = hdlc_start_xmit,
4239        .ndo_do_ioctl   = hdlcdev_ioctl,
4240        .ndo_tx_timeout = hdlcdev_tx_timeout,
4241};
4242
4243/**
4244 * called by device driver when adding device instance
4245 * do generic HDLC initialization
4246 *
4247 * info  pointer to device instance information
4248 *
4249 * returns 0 if success, otherwise error code
4250 */
4251static int hdlcdev_init(MGSLPC_INFO *info)
4252{
4253        int rc;
4254        struct net_device *dev;
4255        hdlc_device *hdlc;
4256
4257        /* allocate and initialize network and HDLC layer objects */
4258
4259        dev = alloc_hdlcdev(info);
4260        if (dev == NULL) {
4261                printk(KERN_ERR "%s:hdlc device allocation failure\n", __FILE__);
4262                return -ENOMEM;
4263        }
4264
4265        /* for network layer reporting purposes only */
4266        dev->base_addr = info->io_base;
4267        dev->irq       = info->irq_level;
4268
4269        /* network layer callbacks and settings */
4270        dev->netdev_ops     = &hdlcdev_ops;
4271        dev->watchdog_timeo = 10 * HZ;
4272        dev->tx_queue_len   = 50;
4273
4274        /* generic HDLC layer callbacks and settings */
4275        hdlc         = dev_to_hdlc(dev);
4276        hdlc->attach = hdlcdev_attach;
4277        hdlc->xmit   = hdlcdev_xmit;
4278
4279        /* register objects with HDLC layer */
4280        rc = register_hdlc_device(dev);
4281        if (rc) {
4282                printk(KERN_WARNING "%s:unable to register hdlc device\n", __FILE__);
4283                free_netdev(dev);
4284                return rc;
4285        }
4286
4287        info->netdev = dev;
4288        return 0;
4289}
4290
4291/**
4292 * called by device driver when removing device instance
4293 * do generic HDLC cleanup
4294 *
4295 * info  pointer to device instance information
4296 */
4297static void hdlcdev_exit(MGSLPC_INFO *info)
4298{
4299        unregister_hdlc_device(info->netdev);
4300        free_netdev(info->netdev);
4301        info->netdev = NULL;
4302}
4303
4304#endif /* CONFIG_HDLC */
4305
4306