/*
 * ispccp2.c
 *
 * TI OMAP3 ISP - CCP2 module
 *
 * Copyright (C) 2010 Nokia Corporation
 * Copyright (C) 2010 Texas Instruments, Inc.
 *
 * Contacts: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
 *           Sakari Ailus <sakari.ailus@iki.fi>
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License version 2 as
 * published by the Free Software Foundation.
 */

#include <linux/delay.h>
#include <linux/device.h>
#include <linux/mm.h>
#include <linux/module.h>
#include <linux/mutex.h>
#include <linux/uaccess.h>
#include <linux/regulator/consumer.h>

#include "isp.h"
#include "ispreg.h"
#include "ispccp2.h"

/* Number of LCX channels */
#define CCP2_LCx_CHANS_NUM                      3
/* Max/Min size for CCP2 video port */
#define ISPCCP2_DAT_START_MIN                   0
#define ISPCCP2_DAT_START_MAX                   4095
#define ISPCCP2_DAT_SIZE_MIN                    0
#define ISPCCP2_DAT_SIZE_MAX                    4095
#define ISPCCP2_VPCLK_FRACDIV                   65536
#define ISPCCP2_LCx_CTRL_FORMAT_RAW8_DPCM10_VP  0x12
#define ISPCCP2_LCx_CTRL_FORMAT_RAW10_VP        0x16
/* Max/Min size for CCP2 memory channel */
#define ISPCCP2_LCM_HSIZE_COUNT_MIN             16
#define ISPCCP2_LCM_HSIZE_COUNT_MAX             8191
#define ISPCCP2_LCM_HSIZE_SKIP_MIN              0
#define ISPCCP2_LCM_HSIZE_SKIP_MAX              8191
#define ISPCCP2_LCM_VSIZE_MIN                   1
#define ISPCCP2_LCM_VSIZE_MAX                   8191
#define ISPCCP2_LCM_HWORDS_MIN                  1
#define ISPCCP2_LCM_HWORDS_MAX                  4095
#define ISPCCP2_LCM_CTRL_BURST_SIZE_32X         5
#define ISPCCP2_LCM_CTRL_READ_THROTTLE_FULL     0
#define ISPCCP2_LCM_CTRL_SRC_DECOMPR_DPCM10     2
#define ISPCCP2_LCM_CTRL_SRC_FORMAT_RAW8        2
#define ISPCCP2_LCM_CTRL_SRC_FORMAT_RAW10       3
#define ISPCCP2_LCM_CTRL_DST_FORMAT_RAW10       3
#define ISPCCP2_LCM_CTRL_DST_PORT_VP            0
#define ISPCCP2_LCM_CTRL_DST_PORT_MEM           1

/* Set only the required bits */
#define BIT_SET(var, shift, mask, val)                  \
        do {                                            \
                var = ((var) & ~((mask) << (shift)))    \
                        | ((val) << (shift));           \
        } while (0)

/*
 * ccp2_print_status - Print current CCP2 module register values.
 */
#define CCP2_PRINT_REGISTER(isp, name)\
        dev_dbg(isp->dev, "###CCP2 " #name "=0x%08x\n", \
                isp_reg_readl(isp, OMAP3_ISP_IOMEM_CCP2, ISPCCP2_##name))

static void ccp2_print_status(struct isp_ccp2_device *ccp2)
{
        struct isp_device *isp = to_isp_device(ccp2);

        dev_dbg(isp->dev, "-------------CCP2 Register dump-------------\n");

        CCP2_PRINT_REGISTER(isp, SYSCONFIG);
        CCP2_PRINT_REGISTER(isp, SYSSTATUS);
        CCP2_PRINT_REGISTER(isp, LC01_IRQENABLE);
        CCP2_PRINT_REGISTER(isp, LC01_IRQSTATUS);
        CCP2_PRINT_REGISTER(isp, LC23_IRQENABLE);
        CCP2_PRINT_REGISTER(isp, LC23_IRQSTATUS);
        CCP2_PRINT_REGISTER(isp, LCM_IRQENABLE);
        CCP2_PRINT_REGISTER(isp, LCM_IRQSTATUS);
        CCP2_PRINT_REGISTER(isp, CTRL);
        CCP2_PRINT_REGISTER(isp, LCx_CTRL(0));
        CCP2_PRINT_REGISTER(isp, LCx_CODE(0));
        CCP2_PRINT_REGISTER(isp, LCx_STAT_START(0));
        CCP2_PRINT_REGISTER(isp, LCx_STAT_SIZE(0));
        CCP2_PRINT_REGISTER(isp, LCx_SOF_ADDR(0));
        CCP2_PRINT_REGISTER(isp, LCx_EOF_ADDR(0));
        CCP2_PRINT_REGISTER(isp, LCx_DAT_START(0));
        CCP2_PRINT_REGISTER(isp, LCx_DAT_SIZE(0));
        CCP2_PRINT_REGISTER(isp, LCx_DAT_PING_ADDR(0));
        CCP2_PRINT_REGISTER(isp, LCx_DAT_PONG_ADDR(0));
        CCP2_PRINT_REGISTER(isp, LCx_DAT_OFST(0));
        CCP2_PRINT_REGISTER(isp, LCM_CTRL);
        CCP2_PRINT_REGISTER(isp, LCM_VSIZE);
        CCP2_PRINT_REGISTER(isp, LCM_HSIZE);
        CCP2_PRINT_REGISTER(isp, LCM_PREFETCH);
        CCP2_PRINT_REGISTER(isp, LCM_SRC_ADDR);
        CCP2_PRINT_REGISTER(isp, LCM_SRC_OFST);
        CCP2_PRINT_REGISTER(isp, LCM_DST_ADDR);
        CCP2_PRINT_REGISTER(isp, LCM_DST_OFST);

        dev_dbg(isp->dev, "--------------------------------------------\n");
}

/*
 * ccp2_reset - Reset the CCP2
 * @ccp2: pointer to ISP CCP2 device
 */
static void ccp2_reset(struct isp_ccp2_device *ccp2)
{
        struct isp_device *isp = to_isp_device(ccp2);
        int i = 0;

        /* Reset the CSI1/CCP2B and wait for reset to complete */
        isp_reg_set(isp, OMAP3_ISP_IOMEM_CCP2, ISPCCP2_SYSCONFIG,
                    ISPCCP2_SYSCONFIG_SOFT_RESET);
        while (!(isp_reg_readl(isp, OMAP3_ISP_IOMEM_CCP2, ISPCCP2_SYSSTATUS) &
                 ISPCCP2_SYSSTATUS_RESET_DONE)) {
                udelay(10);
                if (i++ > 10) {  /* try read 10 times */
                        dev_warn(isp->dev,
                                "omap3_isp: timeout waiting for ccp2 reset\n");
                        break;
                }
        }
}

/*
 * ccp2_pwr_cfg - Configure the power mode settings
 * @ccp2: pointer to ISP CCP2 device
 */
static void ccp2_pwr_cfg(struct isp_ccp2_device *ccp2)
{
        struct isp_device *isp = to_isp_device(ccp2);

        isp_reg_writel(isp, ISPCCP2_SYSCONFIG_MSTANDBY_MODE_SMART |
                        ((isp->revision == ISP_REVISION_15_0 && isp->autoidle) ?
                          ISPCCP2_SYSCONFIG_AUTO_IDLE : 0),
                       OMAP3_ISP_IOMEM_CCP2, ISPCCP2_SYSCONFIG);
}

/*
 * ccp2_if_enable - Enable CCP2 interface.
 * @ccp2: pointer to ISP CCP2 device
 * @enable: enable/disable flag
 */
static int ccp2_if_enable(struct isp_ccp2_device *ccp2, u8 enable)
{
        struct isp_device *isp = to_isp_device(ccp2);
        int ret;
        int i;

        if (enable && ccp2->vdds_csib) {
                ret = regulator_enable(ccp2->vdds_csib);
                if (ret < 0)
                        return ret;
        }

        /* Enable/Disable all the LCx channels */
        for (i = 0; i < CCP2_LCx_CHANS_NUM; i++)
                isp_reg_clr_set(isp, OMAP3_ISP_IOMEM_CCP2, ISPCCP2_LCx_CTRL(i),
                                ISPCCP2_LCx_CTRL_CHAN_EN,
                                enable ? ISPCCP2_LCx_CTRL_CHAN_EN : 0);

        /* Enable/Disable ccp2 interface in ccp2 mode */
        isp_reg_clr_set(isp, OMAP3_ISP_IOMEM_CCP2, ISPCCP2_CTRL,
                        ISPCCP2_CTRL_MODE | ISPCCP2_CTRL_IF_EN,
                        enable ? (ISPCCP2_CTRL_MODE | ISPCCP2_CTRL_IF_EN) : 0);

        if (!enable && ccp2->vdds_csib)
                regulator_disable(ccp2->vdds_csib);

        return 0;
}

/*
 * ccp2_mem_enable - Enable CCP2 memory interface.
 * @ccp2: pointer to ISP CCP2 device
 * @enable: enable/disable flag
 */
static void ccp2_mem_enable(struct isp_ccp2_device *ccp2, u8 enable)
{
        struct isp_device *isp = to_isp_device(ccp2);

        if (enable)
                ccp2_if_enable(ccp2, 0);

        /* Enable/Disable ccp2 interface in ccp2 mode */
        isp_reg_clr_set(isp, OMAP3_ISP_IOMEM_CCP2, ISPCCP2_CTRL,
                        ISPCCP2_CTRL_MODE, enable ? ISPCCP2_CTRL_MODE : 0);

        isp_reg_clr_set(isp, OMAP3_ISP_IOMEM_CCP2, ISPCCP2_LCM_CTRL,
                        ISPCCP2_LCM_CTRL_CHAN_EN,
                        enable ? ISPCCP2_LCM_CTRL_CHAN_EN : 0);
}

/*
 * ccp2_phyif_config - Initialize CCP2 phy interface config
 * @ccp2: Pointer to ISP CCP2 device
 * @buscfg: CCP2 platform data
 *
 * Configure the CCP2 physical interface module from platform data.
 *
 * Returns -EIO if strobe is chosen in CSI1 mode, or 0 on success.
 */
static int ccp2_phyif_config(struct isp_ccp2_device *ccp2,
                             const struct isp_ccp2_cfg *buscfg)
{
        struct isp_device *isp = to_isp_device(ccp2);
        u32 val;

        val = isp_reg_readl(isp, OMAP3_ISP_IOMEM_CCP2, ISPCCP2_CTRL) |
                            ISPCCP2_CTRL_MODE;
        /* Data/strobe physical layer */
        BIT_SET(val, ISPCCP2_CTRL_PHY_SEL_SHIFT, ISPCCP2_CTRL_PHY_SEL_MASK,
                buscfg->phy_layer);
        BIT_SET(val, ISPCCP2_CTRL_IO_OUT_SEL_SHIFT,
                ISPCCP2_CTRL_IO_OUT_SEL_MASK, buscfg->ccp2_mode);
        BIT_SET(val, ISPCCP2_CTRL_INV_SHIFT, ISPCCP2_CTRL_INV_MASK,
                buscfg->strobe_clk_pol);
        BIT_SET(val, ISPCCP2_CTRL_VP_CLK_POL_SHIFT,
                ISPCCP2_CTRL_VP_CLK_POL_MASK, buscfg->vp_clk_pol);
        isp_reg_writel(isp, val, OMAP3_ISP_IOMEM_CCP2, ISPCCP2_CTRL);

        val = isp_reg_readl(isp, OMAP3_ISP_IOMEM_CCP2, ISPCCP2_CTRL);
        if (!(val & ISPCCP2_CTRL_MODE)) {
                if (buscfg->ccp2_mode == ISP_CCP2_MODE_CCP2)
                        dev_warn(isp->dev, "OMAP3 CCP2 bus not available\n");
                if (buscfg->phy_layer == ISP_CCP2_PHY_DATA_STROBE)
                        /* Strobe mode requires CCP2 */
                        return -EIO;
        }

        return 0;
}

/*
 * ccp2_vp_config - Initialize CCP2 video port interface.
 * @ccp2: Pointer to ISP CCP2 device
 * @vpclk_div: Video port divisor
 *
 * Configure the CCP2 video port with the given clock divisor. The valid divisor
 * values depend on the ISP revision:
 *
 * - revision 1.0 and 2.0       1 to 4
 * - revision 15.0              1 to 65536
 *
 * The exact divisor value used might differ from the requested value, as ISP
 * revision 15.0 represent the divisor by 65536 divided by an integer.
 */
static void ccp2_vp_config(struct isp_ccp2_device *ccp2,
                           unsigned int vpclk_div)
{
        struct isp_device *isp = to_isp_device(ccp2);
        u32 val;

        /* ISPCCP2_CTRL Video port */
        val = isp_reg_readl(isp, OMAP3_ISP_IOMEM_CCP2, ISPCCP2_CTRL);
        val |= ISPCCP2_CTRL_VP_ONLY_EN; /* Disable the memory write port */

        if (isp->revision == ISP_REVISION_15_0) {
                vpclk_div = clamp_t(unsigned int, vpclk_div, 1, 65536);
                vpclk_div = min(ISPCCP2_VPCLK_FRACDIV / vpclk_div, 65535U);
                BIT_SET(val, ISPCCP2_CTRL_VPCLK_DIV_SHIFT,
                        ISPCCP2_CTRL_VPCLK_DIV_MASK, vpclk_div);
        } else {
                vpclk_div = clamp_t(unsigned int, vpclk_div, 1, 4);
                BIT_SET(val, ISPCCP2_CTRL_VP_OUT_CTRL_SHIFT,
                        ISPCCP2_CTRL_VP_OUT_CTRL_MASK, vpclk_div - 1);
        }

        isp_reg_writel(isp, val, OMAP3_ISP_IOMEM_CCP2, ISPCCP2_CTRL);
}

/*
 * ccp2_lcx_config - Initialize CCP2 logical channel interface.
 * @ccp2: Pointer to ISP CCP2 device
 * @config: Pointer to ISP LCx config structure.
 *
 * This will analyze the parameters passed by the interface config
 * and configure CSI1/CCP2 logical channel
 *
 */
static void ccp2_lcx_config(struct isp_ccp2_device *ccp2,
                            struct isp_interface_lcx_config *config)
{
        struct isp_device *isp = to_isp_device(ccp2);
        u32 val, format;

        switch (config->format) {
        case MEDIA_BUS_FMT_SGRBG10_DPCM8_1X8:
                format = ISPCCP2_LCx_CTRL_FORMAT_RAW8_DPCM10_VP;
                break;
        case MEDIA_BUS_FMT_SGRBG10_1X10:
        default:
                format = ISPCCP2_LCx_CTRL_FORMAT_RAW10_VP;      /* RAW10+VP */
                break;
        }
        /* ISPCCP2_LCx_CTRL logical channel #0 */
        val = isp_reg_readl(isp, OMAP3_ISP_IOMEM_CCP2, ISPCCP2_LCx_CTRL(0))
                            | (ISPCCP2_LCx_CTRL_REGION_EN); /* Region */

        if (isp->revision == ISP_REVISION_15_0) {
                /* CRC */
                BIT_SET(val, ISPCCP2_LCx_CTRL_CRC_SHIFT_15_0,
                        ISPCCP2_LCx_CTRL_CRC_MASK,
                        config->crc);
                /* Format = RAW10+VP or RAW8+DPCM10+VP*/
                BIT_SET(val, ISPCCP2_LCx_CTRL_FORMAT_SHIFT_15_0,
                        ISPCCP2_LCx_CTRL_FORMAT_MASK_15_0, format);
        } else {
                BIT_SET(val, ISPCCP2_LCx_CTRL_CRC_SHIFT,
                        ISPCCP2_LCx_CTRL_CRC_MASK,
                        config->crc);

                BIT_SET(val, ISPCCP2_LCx_CTRL_FORMAT_SHIFT,
                        ISPCCP2_LCx_CTRL_FORMAT_MASK, format);
        }
        isp_reg_writel(isp, val, OMAP3_ISP_IOMEM_CCP2, ISPCCP2_LCx_CTRL(0));

        /* ISPCCP2_DAT_START for logical channel #0 */
        isp_reg_writel(isp, config->data_start << ISPCCP2_LCx_DAT_SHIFT,
                       OMAP3_ISP_IOMEM_CCP2, ISPCCP2_LCx_DAT_START(0));

        /* ISPCCP2_DAT_SIZE for logical channel #0 */
        isp_reg_writel(isp, config->data_size << ISPCCP2_LCx_DAT_SHIFT,
                       OMAP3_ISP_IOMEM_CCP2, ISPCCP2_LCx_DAT_SIZE(0));

        /* Enable error IRQs for logical channel #0 */
        val = ISPCCP2_LC01_IRQSTATUS_LC0_FIFO_OVF_IRQ |
              ISPCCP2_LC01_IRQSTATUS_LC0_CRC_IRQ |
              ISPCCP2_LC01_IRQSTATUS_LC0_FSP_IRQ |
              ISPCCP2_LC01_IRQSTATUS_LC0_FW_IRQ |
              ISPCCP2_LC01_IRQSTATUS_LC0_FSC_IRQ |
              ISPCCP2_LC01_IRQSTATUS_LC0_SSC_IRQ;

        isp_reg_writel(isp, val, OMAP3_ISP_IOMEM_CCP2, ISPCCP2_LC01_IRQSTATUS);
        isp_reg_set(isp, OMAP3_ISP_IOMEM_CCP2, ISPCCP2_LC01_IRQENABLE, val);
}

/*
 * ccp2_if_configure - Configure ccp2 with data from sensor
 * @ccp2: Pointer to ISP CCP2 device
 *
 * Return 0 on success or a negative error code
 */
static int ccp2_if_configure(struct isp_ccp2_device *ccp2)
{
        struct isp_pipeline *pipe = to_isp_pipeline(&ccp2->subdev.entity);
        const struct isp_bus_cfg *buscfg;
        struct v4l2_mbus_framefmt *format;
        struct media_pad *pad;
        struct v4l2_subdev *sensor;
        u32 lines = 0;
        int ret;

        ccp2_pwr_cfg(ccp2);

        pad = media_entity_remote_pad(&ccp2->pads[CCP2_PAD_SINK]);
        sensor = media_entity_to_v4l2_subdev(pad->entity);
        buscfg = v4l2_subdev_to_bus_cfg(pipe->external);

        ret = ccp2_phyif_config(ccp2, &buscfg->bus.ccp2);
        if (ret < 0)
                return ret;

        ccp2_vp_config(ccp2, buscfg->bus.ccp2.vpclk_div + 1);

        v4l2_subdev_call(sensor, sensor, g_skip_top_lines, &lines);

        format = &ccp2->formats[CCP2_PAD_SINK];

        ccp2->if_cfg.data_start = lines;
        ccp2->if_cfg.crc = buscfg->bus.ccp2.crc;
        ccp2->if_cfg.format = format->code;
        ccp2->if_cfg.data_size = format->height;

        ccp2_lcx_config(ccp2, &ccp2->if_cfg);

        return 0;
}

static int ccp2_adjust_bandwidth(struct isp_ccp2_device *ccp2)
{
        struct isp_pipeline *pipe = to_isp_pipeline(&ccp2->subdev.entity);
        struct isp_device *isp = to_isp_device(ccp2);
        const struct v4l2_mbus_framefmt *ofmt = &ccp2->formats[CCP2_PAD_SOURCE];
        unsigned long l3_ick = pipe->l3_ick;
        struct v4l2_fract *timeperframe;
        unsigned int vpclk_div = 2;
        unsigned int value;
        u64 bound;
        u64 area;

        /* Compute the minimum clock divisor, based on the pipeline maximum
         * data rate. This is an absolute lower bound if we don't want SBL
         * overflows, so round the value up.
         */
        vpclk_div = max_t(unsigned int, DIV_ROUND_UP(l3_ick, pipe->max_rate),
                          vpclk_div);

        /* Compute the maximum clock divisor, based on the requested frame rate.
         * This is a soft lower bound to achieve a frame rate equal or higher
         * than the requested value, so round the value down.
         */
        timeperframe = &pipe->max_timeperframe;

        if (timeperframe->numerator) {
                area = ofmt->width * ofmt->height;
                bound = div_u64(area * timeperframe->denominator,
                                timeperframe->numerator);
                value = min_t(u64, bound, l3_ick);
                vpclk_div = max_t(unsigned int, l3_ick / value, vpclk_div);
        }

        dev_dbg(isp->dev, "%s: minimum clock divisor = %u\n", __func__,
                vpclk_div);

        return vpclk_div;
}

/*
 * ccp2_mem_configure - Initialize CCP2 memory input/output interface
 * @ccp2: Pointer to ISP CCP2 device
 * @config: Pointer to ISP mem interface config structure
 *
 * This will analyze the parameters passed by the interface config
 * structure, and configure the respective registers for proper
 * CSI1/CCP2 memory input.
 */
static void ccp2_mem_configure(struct isp_ccp2_device *ccp2,
                               struct isp_interface_mem_config *config)
{
        struct isp_device *isp = to_isp_device(ccp2);
        u32 sink_pixcode = ccp2->formats[CCP2_PAD_SINK].code;
        u32 source_pixcode = ccp2->formats[CCP2_PAD_SOURCE].code;
        unsigned int dpcm_decompress = 0;
        u32 val, hwords;

        if (sink_pixcode != source_pixcode &&
            sink_pixcode == MEDIA_BUS_FMT_SGRBG10_DPCM8_1X8)
                dpcm_decompress = 1;

        ccp2_pwr_cfg(ccp2);

        /* Hsize, Skip */
        isp_reg_writel(isp, ISPCCP2_LCM_HSIZE_SKIP_MIN |
                       (config->hsize_count << ISPCCP2_LCM_HSIZE_SHIFT),
                       OMAP3_ISP_IOMEM_CCP2, ISPCCP2_LCM_HSIZE);

        /* Vsize, no. of lines */
        isp_reg_writel(isp, config->vsize_count << ISPCCP2_LCM_VSIZE_SHIFT,
                       OMAP3_ISP_IOMEM_CCP2, ISPCCP2_LCM_VSIZE);

        if (ccp2->video_in.bpl_padding == 0)
                config->src_ofst = 0;
        else
                config->src_ofst = ccp2->video_in.bpl_value;

        isp_reg_writel(isp, config->src_ofst, OMAP3_ISP_IOMEM_CCP2,
                       ISPCCP2_LCM_SRC_OFST);

        /* Source and Destination formats */
        val = ISPCCP2_LCM_CTRL_DST_FORMAT_RAW10 <<
              ISPCCP2_LCM_CTRL_DST_FORMAT_SHIFT;

        if (dpcm_decompress) {
                /* source format is RAW8 */
                val |= ISPCCP2_LCM_CTRL_SRC_FORMAT_RAW8 <<
                       ISPCCP2_LCM_CTRL_SRC_FORMAT_SHIFT;

                /* RAW8 + DPCM10 - simple predictor */
                val |= ISPCCP2_LCM_CTRL_SRC_DPCM_PRED;

                /* enable source DPCM decompression */
                val |= ISPCCP2_LCM_CTRL_SRC_DECOMPR_DPCM10 <<
                       ISPCCP2_LCM_CTRL_SRC_DECOMPR_SHIFT;
        } else {
                /* source format is RAW10 */
                val |= ISPCCP2_LCM_CTRL_SRC_FORMAT_RAW10 <<
                       ISPCCP2_LCM_CTRL_SRC_FORMAT_SHIFT;
        }

        /* Burst size to 32x64 */
        val |= ISPCCP2_LCM_CTRL_BURST_SIZE_32X <<
               ISPCCP2_LCM_CTRL_BURST_SIZE_SHIFT;

        isp_reg_writel(isp, val, OMAP3_ISP_IOMEM_CCP2, ISPCCP2_LCM_CTRL);

        /* Prefetch setup */
        if (dpcm_decompress)
                hwords = (ISPCCP2_LCM_HSIZE_SKIP_MIN +
                          config->hsize_count) >> 3;
        else
                hwords = (ISPCCP2_LCM_HSIZE_SKIP_MIN +
                          config->hsize_count) >> 2;

        isp_reg_writel(isp, hwords << ISPCCP2_LCM_PREFETCH_SHIFT,
                       OMAP3_ISP_IOMEM_CCP2, ISPCCP2_LCM_PREFETCH);

        /* Video port */
        isp_reg_set(isp, OMAP3_ISP_IOMEM_CCP2, ISPCCP2_CTRL,
                    ISPCCP2_CTRL_IO_OUT_SEL | ISPCCP2_CTRL_MODE);
        ccp2_vp_config(ccp2, ccp2_adjust_bandwidth(ccp2));

        /* Clear LCM interrupts */
        isp_reg_writel(isp, ISPCCP2_LCM_IRQSTATUS_OCPERROR_IRQ |
                       ISPCCP2_LCM_IRQSTATUS_EOF_IRQ,
                       OMAP3_ISP_IOMEM_CCP2, ISPCCP2_LCM_IRQSTATUS);

        /* Enable LCM interrupts */
        isp_reg_set(isp, OMAP3_ISP_IOMEM_CCP2, ISPCCP2_LCM_IRQENABLE,
                    ISPCCP2_LCM_IRQSTATUS_EOF_IRQ |
                    ISPCCP2_LCM_IRQSTATUS_OCPERROR_IRQ);
}

/*
 * ccp2_set_inaddr - Sets memory address of input frame.
 * @ccp2: Pointer to ISP CCP2 device
 * @addr: 32bit memory address aligned on 32byte boundary.
 *
 * Configures the memory address from which the input frame is to be read.
 */
static void ccp2_set_inaddr(struct isp_ccp2_device *ccp2, u32 addr)
{
        struct isp_device *isp = to_isp_device(ccp2);

        isp_reg_writel(isp, addr, OMAP3_ISP_IOMEM_CCP2, ISPCCP2_LCM_SRC_ADDR);
}

/* -----------------------------------------------------------------------------
 * Interrupt handling
 */

static void ccp2_isr_buffer(struct isp_ccp2_device *ccp2)
{
        struct isp_pipeline *pipe = to_isp_pipeline(&ccp2->subdev.entity);
        struct isp_buffer *buffer;

        buffer = omap3isp_video_buffer_next(&ccp2->video_in);
        if (buffer != NULL)
                ccp2_set_inaddr(ccp2, buffer->dma);

        pipe->state |= ISP_PIPELINE_IDLE_INPUT;

        if (ccp2->state == ISP_PIPELINE_STREAM_SINGLESHOT) {
                if (isp_pipeline_ready(pipe))
                        omap3isp_pipeline_set_stream(pipe,
                                                ISP_PIPELINE_STREAM_SINGLESHOT);
        }
}

/*
 * omap3isp_ccp2_isr - Handle ISP CCP2 interrupts
 * @ccp2: Pointer to ISP CCP2 device
 *
 * This will handle the CCP2 interrupts
 */
void omap3isp_ccp2_isr(struct isp_ccp2_device *ccp2)
{
        struct isp_pipeline *pipe = to_isp_pipeline(&ccp2->subdev.entity);
        struct isp_device *isp = to_isp_device(ccp2);
        static const u32 ISPCCP2_LC01_ERROR =
                ISPCCP2_LC01_IRQSTATUS_LC0_FIFO_OVF_IRQ |
                ISPCCP2_LC01_IRQSTATUS_LC0_CRC_IRQ |
                ISPCCP2_LC01_IRQSTATUS_LC0_FSP_IRQ |
                ISPCCP2_LC01_IRQSTATUS_LC0_FW_IRQ |
                ISPCCP2_LC01_IRQSTATUS_LC0_FSC_IRQ |
                ISPCCP2_LC01_IRQSTATUS_LC0_SSC_IRQ;
        u32 lcx_irqstatus, lcm_irqstatus;

        /* First clear the interrupts */
        lcx_irqstatus = isp_reg_readl(isp, OMAP3_ISP_IOMEM_CCP2,
                                      ISPCCP2_LC01_IRQSTATUS);
        isp_reg_writel(isp, lcx_irqstatus, OMAP3_ISP_IOMEM_CCP2,
                       ISPCCP2_LC01_IRQSTATUS);

        lcm_irqstatus = isp_reg_readl(isp, OMAP3_ISP_IOMEM_CCP2,
                                      ISPCCP2_LCM_IRQSTATUS);
        isp_reg_writel(isp, lcm_irqstatus, OMAP3_ISP_IOMEM_CCP2,
                       ISPCCP2_LCM_IRQSTATUS);
        /* Errors */
        if (lcx_irqstatus & ISPCCP2_LC01_ERROR) {
                pipe->error = true;
                dev_dbg(isp->dev, "CCP2 err:%x\n", lcx_irqstatus);
                return;
        }

        if (lcm_irqstatus & ISPCCP2_LCM_IRQSTATUS_OCPERROR_IRQ) {
                pipe->error = true;
                dev_dbg(isp->dev, "CCP2 OCP err:%x\n", lcm_irqstatus);
        }

        if (omap3isp_module_sync_is_stopping(&ccp2->wait, &ccp2->stopping))
                return;

        /* Handle queued buffers on frame end interrupts */
        if (lcm_irqstatus & ISPCCP2_LCM_IRQSTATUS_EOF_IRQ)
                ccp2_isr_buffer(ccp2);
}

/* -----------------------------------------------------------------------------
 * V4L2 subdev operations
 */

static const unsigned int ccp2_fmts[] = {
        MEDIA_BUS_FMT_SGRBG10_1X10,
        MEDIA_BUS_FMT_SGRBG10_DPCM8_1X8,
};

/*
 * __ccp2_get_format - helper function for getting ccp2 format
 * @ccp2  : Pointer to ISP CCP2 device
 * @cfg: V4L2 subdev pad configuration
 * @pad   : pad number
 * @which : wanted subdev format
 * return format structure or NULL on error
 */
static struct v4l2_mbus_framefmt *
__ccp2_get_format(struct isp_ccp2_device *ccp2, struct v4l2_subdev_pad_config *cfg,
                     unsigned int pad, enum v4l2_subdev_format_whence which)
{
        if (which == V4L2_SUBDEV_FORMAT_TRY)
                return v4l2_subdev_get_try_format(&ccp2->subdev, cfg, pad);
        else
                return &ccp2->formats[pad];
}

/*
 * ccp2_try_format - Handle try format by pad subdev method
 * @ccp2  : Pointer to ISP CCP2 device
 * @cfg: V4L2 subdev pad configuration
 * @pad   : pad num
 * @fmt   : pointer to v4l2 mbus format structure
 * @which : wanted subdev format
 */
static void ccp2_try_format(struct isp_ccp2_device *ccp2,
                               struct v4l2_subdev_pad_config *cfg, unsigned int pad,
                               struct v4l2_mbus_framefmt *fmt,
                               enum v4l2_subdev_format_whence which)
{
        struct v4l2_mbus_framefmt *format;

        switch (pad) {
        case CCP2_PAD_SINK:
                if (fmt->code != MEDIA_BUS_FMT_SGRBG10_DPCM8_1X8)
                        fmt->code = MEDIA_BUS_FMT_SGRBG10_1X10;

                if (ccp2->input == CCP2_INPUT_SENSOR) {
                        fmt->width = clamp_t(u32, fmt->width,
                                             ISPCCP2_DAT_START_MIN,
                                             ISPCCP2_DAT_START_MAX);
                        fmt->height = clamp_t(u32, fmt->height,
                                              ISPCCP2_DAT_SIZE_MIN,
                                              ISPCCP2_DAT_SIZE_MAX);
                } else if (ccp2->input == CCP2_INPUT_MEMORY) {
                        fmt->width = clamp_t(u32, fmt->width,
                                             ISPCCP2_LCM_HSIZE_COUNT_MIN,
                                             ISPCCP2_LCM_HSIZE_COUNT_MAX);
                        fmt->height = clamp_t(u32, fmt->height,
                                              ISPCCP2_LCM_VSIZE_MIN,
                                              ISPCCP2_LCM_VSIZE_MAX);
                }
                break;

        case CCP2_PAD_SOURCE:
                /* Source format - copy sink format and change pixel code
                 * to SGRBG10_1X10 as we don't support CCP2 write to memory.
                 * When CCP2 write to memory feature will be added this
                 * should be changed properly.
                 */
                format = __ccp2_get_format(ccp2, cfg, CCP2_PAD_SINK, which);
                memcpy(fmt, format, sizeof(*fmt));
                fmt->code = MEDIA_BUS_FMT_SGRBG10_1X10;
                break;
        }

        fmt->field = V4L2_FIELD_NONE;
        fmt->colorspace = V4L2_COLORSPACE_SRGB;
}

/*
 * ccp2_enum_mbus_code - Handle pixel format enumeration
 * @sd     : pointer to v4l2 subdev structure
 * @cfg: V4L2 subdev pad configuration
 * @code   : pointer to v4l2_subdev_mbus_code_enum structure
 * return -EINVAL or zero on success
 */
static int ccp2_enum_mbus_code(struct v4l2_subdev *sd,
                                  struct v4l2_subdev_pad_config *cfg,
                                  struct v4l2_subdev_mbus_code_enum *code)
{
        struct isp_ccp2_device *ccp2 = v4l2_get_subdevdata(sd);
        struct v4l2_mbus_framefmt *format;

        if (code->pad == CCP2_PAD_SINK) {
                if (code->index >= ARRAY_SIZE(ccp2_fmts))
                        return -EINVAL;

                code->code = ccp2_fmts[code->index];
        } else {
                if (code->index != 0)
                        return -EINVAL;

                format = __ccp2_get_format(ccp2, cfg, CCP2_PAD_SINK,
                                              code->which);
                code->code = format->code;
        }

        return 0;
}

static int ccp2_enum_frame_size(struct v4l2_subdev *sd,
                                   struct v4l2_subdev_pad_config *cfg,
                                   struct v4l2_subdev_frame_size_enum *fse)
{
        struct isp_ccp2_device *ccp2 = v4l2_get_subdevdata(sd);
        struct v4l2_mbus_framefmt format;

        if (fse->index != 0)
                return -EINVAL;

        format.code = fse->code;
        format.width = 1;
        format.height = 1;
        ccp2_try_format(ccp2, cfg, fse->pad, &format, fse->which);
        fse->min_width = format.width;
        fse->min_height = format.height;

        if (format.code != fse->code)
                return -EINVAL;

        format.code = fse->code;
        format.width = -1;
        format.height = -1;
        ccp2_try_format(ccp2, cfg, fse->pad, &format, fse->which);
        fse->max_width = format.width;
        fse->max_height = format.height;

        return 0;
}

/*
 * ccp2_get_format - Handle get format by pads subdev method
 * @sd    : pointer to v4l2 subdev structure
 * @cfg: V4L2 subdev pad configuration
 * @fmt   : pointer to v4l2 subdev format structure
 * return -EINVAL or zero on success
 */
static int ccp2_get_format(struct v4l2_subdev *sd, struct v4l2_subdev_pad_config *cfg,
                              struct v4l2_subdev_format *fmt)
{
        struct isp_ccp2_device *ccp2 = v4l2_get_subdevdata(sd);
        struct v4l2_mbus_framefmt *format;

        format = __ccp2_get_format(ccp2, cfg, fmt->pad, fmt->which);
        if (format == NULL)
                return -EINVAL;

        fmt->format = *format;
        return 0;
}

/*
 * ccp2_set_format - Handle set format by pads subdev method
 * @sd    : pointer to v4l2 subdev structure
 * @cfg: V4L2 subdev pad configuration
 * @fmt   : pointer to v4l2 subdev format structure
 * returns zero
 */
static int ccp2_set_format(struct v4l2_subdev *sd, struct v4l2_subdev_pad_config *cfg,
                              struct v4l2_subdev_format *fmt)
{
        struct isp_ccp2_device *ccp2 = v4l2_get_subdevdata(sd);
        struct v4l2_mbus_framefmt *format;

        format = __ccp2_get_format(ccp2, cfg, fmt->pad, fmt->which);
        if (format == NULL)
                return -EINVAL;

        ccp2_try_format(ccp2, cfg, fmt->pad, &fmt->format, fmt->which);
        *format = fmt->format;

        /* Propagate the format from sink to source */
        if (fmt->pad == CCP2_PAD_SINK) {
                format = __ccp2_get_format(ccp2, cfg, CCP2_PAD_SOURCE,
                                           fmt->which);
                *format = fmt->format;
                ccp2_try_format(ccp2, cfg, CCP2_PAD_SOURCE, format, fmt->which);
        }

        return 0;
}

/*
 * ccp2_init_formats - Initialize formats on all pads
 * @sd: ISP CCP2 V4L2 subdevice
 * @fh: V4L2 subdev file handle
 *
 * Initialize all pad formats with default values. If fh is not NULL, try
 * formats are initialized on the file handle. Otherwise active formats are
 * initialized on the device.
 */
static int ccp2_init_formats(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh)
{
        struct v4l2_subdev_format format;

        memset(&format, 0, sizeof(format));
        format.pad = CCP2_PAD_SINK;
        format.which = fh ? V4L2_SUBDEV_FORMAT_TRY : V4L2_SUBDEV_FORMAT_ACTIVE;
        format.format.code = MEDIA_BUS_FMT_SGRBG10_1X10;
        format.format.width = 4096;
        format.format.height = 4096;
        ccp2_set_format(sd, fh ? fh->pad : NULL, &format);

        return 0;
}

/*
 * ccp2_s_stream - Enable/Disable streaming on ccp2 subdev
 * @sd    : pointer to v4l2 subdev structure
 * @enable: 1 == Enable, 0 == Disable
 * return zero
 */
static int ccp2_s_stream(struct v4l2_subdev *sd, int enable)
{
        struct isp_ccp2_device *ccp2 = v4l2_get_subdevdata(sd);
        struct isp_device *isp = to_isp_device(ccp2);
        struct device *dev = to_device(ccp2);
        int ret;

        if (ccp2->state == ISP_PIPELINE_STREAM_STOPPED) {
                if (enable == ISP_PIPELINE_STREAM_STOPPED)
                        return 0;
                atomic_set(&ccp2->stopping, 0);
        }

        switch (enable) {
        case ISP_PIPELINE_STREAM_CONTINUOUS:
                if (ccp2->phy) {
                        ret = omap3isp_csiphy_acquire(ccp2->phy, &sd->entity);
                        if (ret < 0)
                                return ret;
                }

                ccp2_if_configure(ccp2);
                ccp2_print_status(ccp2);

                /* Enable CSI1/CCP2 interface */
                ret = ccp2_if_enable(ccp2, 1);
                if (ret < 0) {
                        if (ccp2->phy)
                                omap3isp_csiphy_release(ccp2->phy);
                        return ret;
                }
                break;

        case ISP_PIPELINE_STREAM_SINGLESHOT:
                if (ccp2->state != ISP_PIPELINE_STREAM_SINGLESHOT) {
                        struct v4l2_mbus_framefmt *format;

                        format = &ccp2->formats[CCP2_PAD_SINK];

                        ccp2->mem_cfg.hsize_count = format->width;
                        ccp2->mem_cfg.vsize_count = format->height;
                        ccp2->mem_cfg.src_ofst = 0;

                        ccp2_mem_configure(ccp2, &ccp2->mem_cfg);
                        omap3isp_sbl_enable(isp, OMAP3_ISP_SBL_CSI1_READ);
                        ccp2_print_status(ccp2);
                }
                ccp2_mem_enable(ccp2, 1);
                break;

        case ISP_PIPELINE_STREAM_STOPPED:
                if (omap3isp_module_sync_idle(&sd->entity, &ccp2->wait,
                                              &ccp2->stopping))
                        dev_dbg(dev, "%s: module stop timeout.\n", sd->name);
                if (ccp2->input == CCP2_INPUT_MEMORY) {
                        ccp2_mem_enable(ccp2, 0);
                        omap3isp_sbl_disable(isp, OMAP3_ISP_SBL_CSI1_READ);
                } else if (ccp2->input == CCP2_INPUT_SENSOR) {
                        /* Disable CSI1/CCP2 interface */
                        ccp2_if_enable(ccp2, 0);
                        if (ccp2->phy)
                                omap3isp_csiphy_release(ccp2->phy);
                }
                break;
        }

        ccp2->state = enable;
        return 0;
}

/* subdev video operations */
static const struct v4l2_subdev_video_ops ccp2_sd_video_ops = {
        .s_stream = ccp2_s_stream,
};

/* subdev pad operations */
static const struct v4l2_subdev_pad_ops ccp2_sd_pad_ops = {
        .enum_mbus_code = ccp2_enum_mbus_code,
        .enum_frame_size = ccp2_enum_frame_size,
        .get_fmt = ccp2_get_format,
        .set_fmt = ccp2_set_format,
};

/* subdev operations */
static const struct v4l2_subdev_ops ccp2_sd_ops = {
        .video = &ccp2_sd_video_ops,
        .pad = &ccp2_sd_pad_ops,
};

/* subdev internal operations */
static const struct v4l2_subdev_internal_ops ccp2_sd_internal_ops = {
        .open = ccp2_init_formats,
};

/* --------------------------------------------------------------------------
 * ISP ccp2 video device node
 */

/*
 * ccp2_video_queue - Queue video buffer.
 * @video : Pointer to isp video structure
 * @buffer: Pointer to isp_buffer structure
 * return -EIO or zero on success
 */
static int ccp2_video_queue(struct isp_video *video, struct isp_buffer *buffer)
{
        struct isp_ccp2_device *ccp2 = &video->isp->isp_ccp2;

        ccp2_set_inaddr(ccp2, buffer->dma);
        return 0;
}

static const struct isp_video_operations ccp2_video_ops = {
        .queue = ccp2_video_queue,
};

/* -----------------------------------------------------------------------------
 * Media entity operations
 */

/*
 * ccp2_link_setup - Setup ccp2 connections.
 * @entity : Pointer to media entity structure
 * @local  : Pointer to local pad array
 * @remote : Pointer to remote pad array
 * @flags  : Link flags
 * return -EINVAL on error or zero on success
 */
static int ccp2_link_setup(struct media_entity *entity,
                           const struct media_pad *local,
                           const struct media_pad *remote, u32 flags)
{
        struct v4l2_subdev *sd = media_entity_to_v4l2_subdev(entity);
        struct isp_ccp2_device *ccp2 = v4l2_get_subdevdata(sd);
        unsigned int index = local->index;

        /* FIXME: this is actually a hack! */
        if (is_media_entity_v4l2_subdev(remote->entity))
                index |= 2 << 16;

        switch (index) {
        case CCP2_PAD_SINK:
                /* read from memory */
                if (flags & MEDIA_LNK_FL_ENABLED) {
                        if (ccp2->input == CCP2_INPUT_SENSOR)
                                return -EBUSY;
                        ccp2->input = CCP2_INPUT_MEMORY;
                } else {
                        if (ccp2->input == CCP2_INPUT_MEMORY)
                                ccp2->input = CCP2_INPUT_NONE;
                }
                break;

        case CCP2_PAD_SINK | 2 << 16:
                /* read from sensor/phy */
                if (flags & MEDIA_LNK_FL_ENABLED) {
                        if (ccp2->input == CCP2_INPUT_MEMORY)
                                return -EBUSY;
                        ccp2->input = CCP2_INPUT_SENSOR;
                } else {
                        if (ccp2->input == CCP2_INPUT_SENSOR)
                                ccp2->input = CCP2_INPUT_NONE;
                } break;

        case CCP2_PAD_SOURCE | 2 << 16:
                /* write to video port/ccdc */
                if (flags & MEDIA_LNK_FL_ENABLED)
                        ccp2->output = CCP2_OUTPUT_CCDC;
                else
                        ccp2->output = CCP2_OUTPUT_NONE;
                break;

        default:
                return -EINVAL;
        }

        return 0;
}

/* media operations */
static const struct media_entity_operations ccp2_media_ops = {
        .link_setup = ccp2_link_setup,
        .link_validate = v4l2_subdev_link_validate,
};

/*
 * omap3isp_ccp2_unregister_entities - Unregister media entities: subdev
 * @ccp2: Pointer to ISP CCP2 device
 */
void omap3isp_ccp2_unregister_entities(struct isp_ccp2_device *ccp2)
{
        v4l2_device_unregister_subdev(&ccp2->subdev);
        omap3isp_video_unregister(&ccp2->video_in);
}

/*
 * omap3isp_ccp2_register_entities - Register the subdev media entity
 * @ccp2: Pointer to ISP CCP2 device
 * @vdev: Pointer to v4l device
 * return negative error code or zero on success
 */

int omap3isp_ccp2_register_entities(struct isp_ccp2_device *ccp2,
                                    struct v4l2_device *vdev)
{
        int ret;

        /* Register the subdev and video nodes. */
        ret = v4l2_device_register_subdev(vdev, &ccp2->subdev);
        if (ret < 0)
                goto error;

        ret = omap3isp_video_register(&ccp2->video_in, vdev);
        if (ret < 0)
                goto error;

        return 0;

error:
        omap3isp_ccp2_unregister_entities(ccp2);
        return ret;
}

/* -----------------------------------------------------------------------------
 * ISP ccp2 initialisation and cleanup
 */

/*
 * ccp2_init_entities - Initialize ccp2 subdev and media entity.
 * @ccp2: Pointer to ISP CCP2 device
 * return negative error code or zero on success
 */
static int ccp2_init_entities(struct isp_ccp2_device *ccp2)
{
        struct v4l2_subdev *sd = &ccp2->subdev;
        struct media_pad *pads = ccp2->pads;
        struct media_entity *me = &sd->entity;
        int ret;

        ccp2->input = CCP2_INPUT_NONE;
        ccp2->output = CCP2_OUTPUT_NONE;

        v4l2_subdev_init(sd, &ccp2_sd_ops);
        sd->internal_ops = &ccp2_sd_internal_ops;
        strlcpy(sd->name, "OMAP3 ISP CCP2", sizeof(sd->name));
        sd->grp_id = 1 << 16;   /* group ID for isp subdevs */
        v4l2_set_subdevdata(sd, ccp2);
        sd->flags |= V4L2_SUBDEV_FL_HAS_DEVNODE;

        pads[CCP2_PAD_SINK].flags = MEDIA_PAD_FL_SINK
                                    | MEDIA_PAD_FL_MUST_CONNECT;
        pads[CCP2_PAD_SOURCE].flags = MEDIA_PAD_FL_SOURCE;

        me->ops = &ccp2_media_ops;
        ret = media_entity_pads_init(me, CCP2_PADS_NUM, pads);
        if (ret < 0)
                return ret;

        ccp2_init_formats(sd, NULL);

        /*
         * The CCP2 has weird line alignment requirements, possibly caused by
         * DPCM8 decompression. Line length for data read from memory must be a
         * multiple of 128 bits (16 bytes) in continuous mode (when no padding
         * is present at end of lines). Additionally, if padding is used, the
         * padded line length must be a multiple of 32 bytes. To simplify the
         * implementation we use a fixed 32 bytes alignment regardless of the
         * input format and width. If strict 128 bits alignment support is
         * required ispvideo will need to be made aware of this special dual
         * alignment requirements.
         */
        ccp2->video_in.type = V4L2_BUF_TYPE_VIDEO_OUTPUT;
        ccp2->video_in.bpl_alignment = 32;
        ccp2->video_in.bpl_max = 0xffffffe0;
        ccp2->video_in.isp = to_isp_device(ccp2);
        ccp2->video_in.ops = &ccp2_video_ops;
        ccp2->video_in.capture_mem = PAGE_ALIGN(4096 * 4096) * 3;

        ret = omap3isp_video_init(&ccp2->video_in, "CCP2");
        if (ret < 0)
                goto error;

        return 0;

error:
        media_entity_cleanup(&ccp2->subdev.entity);
        return ret;
}

/*
 * omap3isp_ccp2_init - CCP2 initialization.
 * @isp : Pointer to ISP device
 * return negative error code or zero on success
 */
int omap3isp_ccp2_init(struct isp_device *isp)
{
        struct isp_ccp2_device *ccp2 = &isp->isp_ccp2;
        int ret;

        init_waitqueue_head(&ccp2->wait);

        /*
         * On the OMAP34xx the CSI1 receiver is operated in the CSIb IO
         * complex, which is powered by vdds_csib power rail. Hence the
         * request for the regulator.
         *
         * On the OMAP36xx, the CCP2 uses the CSI PHY1 or PHY2, shared with
         * the CSI2c or CSI2a receivers. The PHY then needs to be explicitly
         * configured.
         *
         * TODO: Don't hardcode the usage of PHY1 (shared with CSI2c).
         */
        if (isp->revision == ISP_REVISION_2_0) {
                ccp2->vdds_csib = devm_regulator_get(isp->dev, "vdds_csib");
                if (IS_ERR(ccp2->vdds_csib)) {
                        if (PTR_ERR(ccp2->vdds_csib) == -EPROBE_DEFER) {
                                dev_dbg(isp->dev,
                                        "Can't get regulator vdds_csib, deferring probing\n");
                                return -EPROBE_DEFER;
                        }
                        dev_dbg(isp->dev,
                                "Could not get regulator vdds_csib\n");
                        ccp2->vdds_csib = NULL;
                }
                ccp2->phy = &isp->isp_csiphy2;
        } else if (isp->revision == ISP_REVISION_15_0) {
                ccp2->phy = &isp->isp_csiphy1;
        }

        ret = ccp2_init_entities(ccp2);
        if (ret < 0)
                return ret;

        ccp2_reset(ccp2);
        return 0;
}

/*
 * omap3isp_ccp2_cleanup - CCP2 un-initialization
 * @isp : Pointer to ISP device
 */
void omap3isp_ccp2_cleanup(struct isp_device *isp)
{
        struct isp_ccp2_device *ccp2 = &isp->isp_ccp2;

        omap3isp_video_cleanup(&ccp2->video_in);
        media_entity_cleanup(&ccp2->subdev.entity);
}