LXR linux/drivers/mtd/devices/docg3.h

   1/*
   2 * Handles the M-Systems DiskOnChip G3 chip
   3 *
   4 * Copyright (C) 2011 Robert Jarzmik
   5 *
   6 * This program is free software; you can redistribute it and/or modify
   7 * it under the terms of the GNU General Public License as published by
   8 * the Free Software Foundation; either version 2 of the License, or
   9 * (at your option) any later version.
  10 *
  11 * This program is distributed in the hope that it will be useful,
  12 * but WITHOUT ANY WARRANTY; without even the implied warranty of
  13 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  14 * GNU General Public License for more details.
  15 *
  16 * You should have received a copy of the GNU General Public License
  17 * along with this program; if not, write to the Free Software
  18 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  19 *
  20 */
  21
  22#ifndef _MTD_DOCG3_H
  23#define _MTD_DOCG3_H
  24
  25#include <linux/mtd/mtd.h>
  26
  27/*
  28 * Flash memory areas :
  29 *   - 0x0000 .. 0x07ff : IPL
  30 *   - 0x0800 .. 0x0fff : Data area
  31 *   - 0x1000 .. 0x17ff : Registers
  32 *   - 0x1800 .. 0x1fff : Unknown
  33 */
  34#define DOC_IOSPACE_IPL                 0x0000
  35#define DOC_IOSPACE_DATA                0x0800
  36#define DOC_IOSPACE_SIZE                0x2000
  37
  38/*
  39 * DOC G3 layout and adressing scheme
  40 *   A page address for the block "b", plane "P" and page "p":
  41 *   address = [bbbb bPpp pppp]
  42 */
  43
  44#define DOC_ADDR_PAGE_MASK              0x3f
  45#define DOC_ADDR_BLOCK_SHIFT            6
  46#define DOC_LAYOUT_NBPLANES             2
  47#define DOC_LAYOUT_PAGES_PER_BLOCK      64
  48#define DOC_LAYOUT_PAGE_SIZE            512
  49#define DOC_LAYOUT_OOB_SIZE             16
  50#define DOC_LAYOUT_WEAR_SIZE            8
  51#define DOC_LAYOUT_PAGE_OOB_SIZE                                \
  52        (DOC_LAYOUT_PAGE_SIZE + DOC_LAYOUT_OOB_SIZE)
  53#define DOC_LAYOUT_WEAR_OFFSET          (DOC_LAYOUT_PAGE_OOB_SIZE * 2)
  54#define DOC_LAYOUT_BLOCK_SIZE                                   \
  55        (DOC_LAYOUT_PAGES_PER_BLOCK * DOC_LAYOUT_PAGE_SIZE)
  56
  57/*
  58 * ECC related constants
  59 */
  60#define DOC_ECC_BCH_M                   14
  61#define DOC_ECC_BCH_T                   4
  62#define DOC_ECC_BCH_PRIMPOLY            0x4443
  63#define DOC_ECC_BCH_SIZE                7
  64#define DOC_ECC_BCH_COVERED_BYTES                               \
  65        (DOC_LAYOUT_PAGE_SIZE + DOC_LAYOUT_OOB_PAGEINFO_SZ +    \
  66         DOC_LAYOUT_OOB_HAMMING_SZ)
  67#define DOC_ECC_BCH_TOTAL_BYTES                                 \
  68        (DOC_ECC_BCH_COVERED_BYTES + DOC_LAYOUT_OOB_BCH_SZ)
  69
  70/*
  71 * Blocks distribution
  72 */
  73#define DOC_LAYOUT_BLOCK_BBT            0
  74#define DOC_LAYOUT_BLOCK_OTP            0
  75#define DOC_LAYOUT_BLOCK_FIRST_DATA     6
  76
  77#define DOC_LAYOUT_PAGE_BBT             4
  78
  79/*
  80 * Extra page OOB (16 bytes wide) layout
  81 */
  82#define DOC_LAYOUT_OOB_PAGEINFO_OFS     0
  83#define DOC_LAYOUT_OOB_HAMMING_OFS      7
  84#define DOC_LAYOUT_OOB_BCH_OFS          8
  85#define DOC_LAYOUT_OOB_UNUSED_OFS       15
  86#define DOC_LAYOUT_OOB_PAGEINFO_SZ      7
  87#define DOC_LAYOUT_OOB_HAMMING_SZ       1
  88#define DOC_LAYOUT_OOB_BCH_SZ           7
  89#define DOC_LAYOUT_OOB_UNUSED_SZ        1
  90
  91
  92#define DOC_CHIPID_G3                   0x200
  93#define DOC_ERASE_MARK                  0xaa
  94#define DOC_MAX_NBFLOORS                4
  95/*
  96 * Flash registers
  97 */
  98#define DOC_CHIPID                      0x1000
  99#define DOC_TEST                        0x1004
 100#define DOC_BUSLOCK                     0x1006
 101#define DOC_ENDIANCONTROL               0x1008
 102#define DOC_DEVICESELECT                0x100a
 103#define DOC_ASICMODE                    0x100c
 104#define DOC_CONFIGURATION               0x100e
 105#define DOC_INTERRUPTCONTROL            0x1010
 106#define DOC_READADDRESS                 0x101a
 107#define DOC_DATAEND                     0x101e
 108#define DOC_INTERRUPTSTATUS             0x1020
 109
 110#define DOC_FLASHSEQUENCE               0x1032
 111#define DOC_FLASHCOMMAND                0x1034
 112#define DOC_FLASHADDRESS                0x1036
 113#define DOC_FLASHCONTROL                0x1038
 114#define DOC_NOP                         0x103e
 115
 116#define DOC_ECCCONF0                    0x1040
 117#define DOC_ECCCONF1                    0x1042
 118#define DOC_ECCPRESET                   0x1044
 119#define DOC_HAMMINGPARITY               0x1046
 120#define DOC_BCH_HW_ECC(idx)             (0x1048 + idx)
 121
 122#define DOC_PROTECTION                  0x1056
 123#define DOC_DPS0_KEY                    0x105c
 124#define DOC_DPS1_KEY                    0x105e
 125#define DOC_DPS0_ADDRLOW                0x1060
 126#define DOC_DPS0_ADDRHIGH               0x1062
 127#define DOC_DPS1_ADDRLOW                0x1064
 128#define DOC_DPS1_ADDRHIGH               0x1066
 129#define DOC_DPS0_STATUS                 0x106c
 130#define DOC_DPS1_STATUS                 0x106e
 131
 132#define DOC_ASICMODECONFIRM             0x1072
 133#define DOC_CHIPID_INV                  0x1074
 134#define DOC_POWERMODE                   0x107c
 135
 136/*
 137 * Flash sequences
 138 * A sequence is preset before one or more commands are input to the chip.
 139 */
 140#define DOC_SEQ_RESET                   0x00
 141#define DOC_SEQ_PAGE_SIZE_532           0x03
 142#define DOC_SEQ_SET_FASTMODE            0x05
 143#define DOC_SEQ_SET_RELIABLEMODE        0x09
 144#define DOC_SEQ_READ                    0x12
 145#define DOC_SEQ_SET_PLANE1              0x0e
 146#define DOC_SEQ_SET_PLANE2              0x10
 147#define DOC_SEQ_PAGE_SETUP              0x1d
 148#define DOC_SEQ_ERASE                   0x27
 149#define DOC_SEQ_PLANES_STATUS           0x31
 150
 151/*
 152 * Flash commands
 153 */
 154#define DOC_CMD_READ_PLANE1             0x00
 155#define DOC_CMD_SET_ADDR_READ           0x05
 156#define DOC_CMD_READ_ALL_PLANES         0x30
 157#define DOC_CMD_READ_PLANE2             0x50
 158#define DOC_CMD_READ_FLASH              0xe0
 159#define DOC_CMD_PAGE_SIZE_532           0x3c
 160
 161#define DOC_CMD_PROG_BLOCK_ADDR         0x60
 162#define DOC_CMD_PROG_CYCLE1             0x80
 163#define DOC_CMD_PROG_CYCLE2             0x10
 164#define DOC_CMD_PROG_CYCLE3             0x11
 165#define DOC_CMD_ERASECYCLE2             0xd0
 166#define DOC_CMD_READ_STATUS             0x70
 167#define DOC_CMD_PLANES_STATUS           0x71
 168
 169#define DOC_CMD_RELIABLE_MODE           0x22
 170#define DOC_CMD_FAST_MODE               0xa2
 171
 172#define DOC_CMD_RESET                   0xff
 173
 174/*
 175 * Flash register : DOC_FLASHCONTROL
 176 */
 177#define DOC_CTRL_VIOLATION              0x20
 178#define DOC_CTRL_CE                     0x10
 179#define DOC_CTRL_UNKNOWN_BITS           0x08
 180#define DOC_CTRL_PROTECTION_ERROR       0x04
 181#define DOC_CTRL_SEQUENCE_ERROR         0x02
 182#define DOC_CTRL_FLASHREADY             0x01
 183
 184/*
 185 * Flash register : DOC_ASICMODE
 186 */
 187#define DOC_ASICMODE_RESET              0x00
 188#define DOC_ASICMODE_NORMAL             0x01
 189#define DOC_ASICMODE_POWERDOWN          0x02
 190#define DOC_ASICMODE_MDWREN             0x04
 191#define DOC_ASICMODE_BDETCT_RESET       0x08
 192#define DOC_ASICMODE_RSTIN_RESET        0x10
 193#define DOC_ASICMODE_RAM_WE             0x20
 194
 195/*
 196 * Flash register : DOC_ECCCONF0
 197 */
 198#define DOC_ECCCONF0_WRITE_MODE         0x0000
 199#define DOC_ECCCONF0_READ_MODE          0x8000
 200#define DOC_ECCCONF0_AUTO_ECC_ENABLE    0x4000
 201#define DOC_ECCCONF0_HAMMING_ENABLE     0x1000
 202#define DOC_ECCCONF0_BCH_ENABLE         0x0800
 203#define DOC_ECCCONF0_DATA_BYTES_MASK    0x07ff
 204
 205/*
 206 * Flash register : DOC_ECCCONF1
 207 */
 208#define DOC_ECCCONF1_BCH_SYNDROM_ERR    0x80
 209#define DOC_ECCCONF1_UNKOWN1            0x40
 210#define DOC_ECCCONF1_PAGE_IS_WRITTEN    0x20
 211#define DOC_ECCCONF1_UNKOWN3            0x10
 212#define DOC_ECCCONF1_HAMMING_BITS_MASK  0x0f
 213
 214/*
 215 * Flash register : DOC_PROTECTION
 216 */
 217#define DOC_PROTECT_FOUNDRY_OTP_LOCK    0x01
 218#define DOC_PROTECT_CUSTOMER_OTP_LOCK   0x02
 219#define DOC_PROTECT_LOCK_INPUT          0x04
 220#define DOC_PROTECT_STICKY_LOCK         0x08
 221#define DOC_PROTECT_PROTECTION_ENABLED  0x10
 222#define DOC_PROTECT_IPL_DOWNLOAD_LOCK   0x20
 223#define DOC_PROTECT_PROTECTION_ERROR    0x80
 224
 225/*
 226 * Flash register : DOC_DPS0_STATUS and DOC_DPS1_STATUS
 227 */
 228#define DOC_DPS_OTP_PROTECTED           0x01
 229#define DOC_DPS_READ_PROTECTED          0x02
 230#define DOC_DPS_WRITE_PROTECTED         0x04
 231#define DOC_DPS_HW_LOCK_ENABLED         0x08
 232#define DOC_DPS_KEY_OK                  0x80
 233
 234/*
 235 * Flash register : DOC_CONFIGURATION
 236 */
 237#define DOC_CONF_IF_CFG                 0x80
 238#define DOC_CONF_MAX_ID_MASK            0x30
 239#define DOC_CONF_VCCQ_3V                0x01
 240
 241/*
 242 * Flash register : DOC_READADDRESS
 243 */
 244#define DOC_READADDR_INC                0x8000
 245#define DOC_READADDR_ONE_BYTE           0x4000
 246#define DOC_READADDR_ADDR_MASK          0x1fff
 247
 248/*
 249 * Flash register : DOC_POWERMODE
 250 */
 251#define DOC_POWERDOWN_READY             0x80
 252
 253/*
 254 * Status of erase and write operation
 255 */
 256#define DOC_PLANES_STATUS_FAIL          0x01
 257#define DOC_PLANES_STATUS_PLANE0_KO     0x02
 258#define DOC_PLANES_STATUS_PLANE1_KO     0x04
 259
 260/*
 261 * DPS key management
 262 *
 263 * Each floor of docg3 has 2 protection areas: DPS0 and DPS1. These areas span
 264 * across block boundaries, and define whether these blocks can be read or
 265 * written.
 266 * The definition is dynamically stored in page 0 of blocks (2,3) for DPS0, and
 267 * page 0 of blocks (4,5) for DPS1.
 268 */
 269#define DOC_LAYOUT_DPS_KEY_LENGTH       8
 270
 271/**
 272 * struct docg3_cascade - Cascade of 1 to 4 docg3 chips
 273 * @floors: floors (ie. one physical docg3 chip is one floor)
 274 * @base: IO space to access all chips in the cascade
 275 * @bch: the BCH correcting control structure
 276 * @lock: lock to protect docg3 IO space from concurrent accesses
 277 */
 278struct docg3_cascade {
 279        struct mtd_info *floors[DOC_MAX_NBFLOORS];
 280        void __iomem *base;
 281        struct bch_control *bch;
 282        struct mutex lock;
 283};
 284
 285/**
 286 * struct docg3 - DiskOnChip driver private data
 287 * @dev: the device currently under control
 288 * @cascade: the cascade this device belongs to
 289 * @device_id: number of the cascaded DoCG3 device (0, 1, 2 or 3)
 290 * @if_cfg: if true, reads are on 16bits, else reads are on 8bits
 291
 292 * @reliable: if 0, docg3 in normal mode, if 1 docg3 in fast mode, if 2 in
 293 *            reliable mode
 294 *            Fast mode implies more errors than normal mode.
 295 *            Reliable mode implies that page 2*n and 2*n+1 are clones.
 296 * @bbt: bad block table cache
 297 * @oob_write_ofs: offset of the MTD where this OOB should belong (ie. in next
 298 *                 page_write)
 299 * @oob_autoecc: if 1, use only bytes 0-7, 15, and fill the others with HW ECC
 300 *               if 0, use all the 16 bytes.
 301 * @oob_write_buf: prepared OOB for next page_write
 302 */
 303struct docg3 {
 304        struct device *dev;
 305        struct docg3_cascade *cascade;
 306        unsigned int device_id:4;
 307        unsigned int if_cfg:1;
 308        unsigned int reliable:2;
 309        int max_block;
 310        u8 *bbt;
 311        loff_t oob_write_ofs;
 312        int oob_autoecc;
 313        u8 oob_write_buf[DOC_LAYOUT_OOB_SIZE];
 314};
 315
 316#define doc_err(fmt, arg...) dev_err(docg3->dev, (fmt), ## arg)
 317#define doc_info(fmt, arg...) dev_info(docg3->dev, (fmt), ## arg)
 318#define doc_dbg(fmt, arg...) dev_dbg(docg3->dev, (fmt), ## arg)
 319#define doc_vdbg(fmt, arg...) dev_vdbg(docg3->dev, (fmt), ## arg)
 320
 321#define DEBUGFS_RO_ATTR(name, show_fct) \
 322        static int name##_open(struct inode *inode, struct file *file) \
 323        { return single_open(file, show_fct, inode->i_private); }      \
 324        static const struct file_operations name##_fops = { \
 325                .owner = THIS_MODULE, \
 326                .open = name##_open, \
 327                .llseek = seq_lseek, \
 328                .read = seq_read, \
 329                .release = single_release \
 330        };
 331#endif
 332
 333/*
 334 * Trace events part
 335 */
 336#undef TRACE_SYSTEM
 337#define TRACE_SYSTEM docg3
 338
 339#if !defined(_MTD_DOCG3_TRACE) || defined(TRACE_HEADER_MULTI_READ)
 340#define _MTD_DOCG3_TRACE
 341
 342#include <linux/tracepoint.h>
 343
 344TRACE_EVENT(docg3_io,
 345            TP_PROTO(int op, int width, u16 reg, int val),
 346            TP_ARGS(op, width, reg, val),
 347            TP_STRUCT__entry(
 348                    __field(int, op)
 349                    __field(unsigned char, width)
 350                    __field(u16, reg)
 351                    __field(int, val)),
 352            TP_fast_assign(
 353                    __entry->op = op;
 354                    __entry->width = width;
 355                    __entry->reg = reg;
 356                    __entry->val = val;),
 357            TP_printk("docg3: %s%02d reg=%04x, val=%04x",
 358                      __entry->op ? "write" : "read", __entry->width,
 359                      __entry->reg, __entry->val)
 360        );
 361#endif
 362
 363/* This part must be outside protection */
 364#undef TRACE_INCLUDE_PATH
 365#undef TRACE_INCLUDE_FILE
 366#define TRACE_INCLUDE_PATH .
 367#define TRACE_INCLUDE_FILE docg3
 368#include <trace/define_trace.h>
 369