linux/drivers/net/ethernet/amd/hplance.c
<<
>>
Prefs
   1/* hplance.c  : the  Linux/hp300/lance ethernet driver
   2 *
   3 * Copyright (C) 05/1998 Peter Maydell <pmaydell@chiark.greenend.org.uk>
   4 * Based on the Sun Lance driver and the NetBSD HP Lance driver
   5 * Uses the generic 7990.c LANCE code.
   6 */
   7
   8#include <linux/module.h>
   9#include <linux/kernel.h>
  10#include <linux/types.h>
  11#include <linux/interrupt.h>
  12#include <linux/ioport.h>
  13#include <linux/string.h>
  14#include <linux/delay.h>
  15#include <linux/init.h>
  16#include <linux/errno.h>
  17/* Used for the temporal inet entries and routing */
  18#include <linux/socket.h>
  19#include <linux/route.h>
  20#include <linux/dio.h>
  21#include <linux/netdevice.h>
  22#include <linux/etherdevice.h>
  23#include <linux/skbuff.h>
  24
  25#include <asm/io.h>
  26#include <asm/pgtable.h>
  27
  28#include "hplance.h"
  29
  30/* We have 16392 bytes of RAM for the init block and buffers. This places
  31 * an upper limit on the number of buffers we can use. NetBSD uses 8 Rx
  32 * buffers and 2 Tx buffers, it takes (8 + 2) * 1544 bytes.
  33 */
  34#define LANCE_LOG_TX_BUFFERS 1
  35#define LANCE_LOG_RX_BUFFERS 3
  36
  37#include "7990.h"                                 /* use generic LANCE code */
  38
  39/* Our private data structure */
  40struct hplance_private {
  41        struct lance_private lance;
  42};
  43
  44/* function prototypes... This is easy because all the grot is in the
  45 * generic LANCE support. All we have to support is probing for boards,
  46 * plus board-specific init, open and close actions.
  47 * Oh, and we need to tell the generic code how to read and write LANCE registers...
  48 */
  49static int hplance_init_one(struct dio_dev *d, const struct dio_device_id *ent);
  50static void hplance_init(struct net_device *dev, struct dio_dev *d);
  51static void hplance_remove_one(struct dio_dev *d);
  52static void hplance_writerap(void *priv, unsigned short value);
  53static void hplance_writerdp(void *priv, unsigned short value);
  54static unsigned short hplance_readrdp(void *priv);
  55static int hplance_open(struct net_device *dev);
  56static int hplance_close(struct net_device *dev);
  57
  58static struct dio_device_id hplance_dio_tbl[] = {
  59        { DIO_ID_LAN },
  60        { 0 }
  61};
  62
  63static struct dio_driver hplance_driver = {
  64        .name      = "hplance",
  65        .id_table  = hplance_dio_tbl,
  66        .probe     = hplance_init_one,
  67        .remove    = hplance_remove_one,
  68};
  69
  70static const struct net_device_ops hplance_netdev_ops = {
  71        .ndo_open               = hplance_open,
  72        .ndo_stop               = hplance_close,
  73        .ndo_start_xmit         = lance_start_xmit,
  74        .ndo_set_rx_mode        = lance_set_multicast,
  75        .ndo_validate_addr      = eth_validate_addr,
  76        .ndo_set_mac_address    = eth_mac_addr,
  77#ifdef CONFIG_NET_POLL_CONTROLLER
  78        .ndo_poll_controller    = lance_poll,
  79#endif
  80};
  81
  82/* Find all the HP Lance boards and initialise them... */
  83static int hplance_init_one(struct dio_dev *d, const struct dio_device_id *ent)
  84{
  85        struct net_device *dev;
  86        int err = -ENOMEM;
  87
  88        dev = alloc_etherdev(sizeof(struct hplance_private));
  89        if (!dev)
  90                goto out;
  91
  92        err = -EBUSY;
  93        if (!request_mem_region(dio_resource_start(d),
  94                                dio_resource_len(d), d->name))
  95                goto out_free_netdev;
  96
  97        hplance_init(dev, d);
  98        err = register_netdev(dev);
  99        if (err)
 100                goto out_release_mem_region;
 101
 102        dio_set_drvdata(d, dev);
 103
 104        printk(KERN_INFO "%s: %s; select code %d, addr %pM, irq %d\n",
 105               dev->name, d->name, d->scode, dev->dev_addr, d->ipl);
 106
 107        return 0;
 108
 109 out_release_mem_region:
 110        release_mem_region(dio_resource_start(d), dio_resource_len(d));
 111 out_free_netdev:
 112        free_netdev(dev);
 113 out:
 114        return err;
 115}
 116
 117static void hplance_remove_one(struct dio_dev *d)
 118{
 119        struct net_device *dev = dio_get_drvdata(d);
 120
 121        unregister_netdev(dev);
 122        release_mem_region(dio_resource_start(d), dio_resource_len(d));
 123        free_netdev(dev);
 124}
 125
 126/* Initialise a single lance board at the given DIO device */
 127static void hplance_init(struct net_device *dev, struct dio_dev *d)
 128{
 129        unsigned long va = (d->resource.start + DIO_VIRADDRBASE);
 130        struct hplance_private *lp;
 131        int i;
 132
 133        /* reset the board */
 134        out_8(va + DIO_IDOFF, 0xff);
 135        udelay(100);                              /* ariba! ariba! udelay! udelay! */
 136
 137        /* Fill the dev fields */
 138        dev->base_addr = va;
 139        dev->netdev_ops = &hplance_netdev_ops;
 140        dev->dma = 0;
 141
 142        for (i = 0; i < 6; i++) {
 143                /* The NVRAM holds our ethernet address, one nibble per byte,
 144                 * at bytes NVRAMOFF+1,3,5,7,9...
 145                 */
 146                dev->dev_addr[i] = ((in_8(va + HPLANCE_NVRAMOFF + i*4 + 1) & 0xF) << 4)
 147                        | (in_8(va + HPLANCE_NVRAMOFF + i*4 + 3) & 0xF);
 148        }
 149
 150        lp = netdev_priv(dev);
 151        lp->lance.name = d->name;
 152        lp->lance.base = va;
 153        lp->lance.init_block = (struct lance_init_block *)(va + HPLANCE_MEMOFF); /* CPU addr */
 154        lp->lance.lance_init_block = NULL;              /* LANCE addr of same RAM */
 155        lp->lance.busmaster_regval = LE_C3_BSWP;        /* we're bigendian */
 156        lp->lance.irq = d->ipl;
 157        lp->lance.writerap = hplance_writerap;
 158        lp->lance.writerdp = hplance_writerdp;
 159        lp->lance.readrdp = hplance_readrdp;
 160        lp->lance.lance_log_rx_bufs = LANCE_LOG_RX_BUFFERS;
 161        lp->lance.lance_log_tx_bufs = LANCE_LOG_TX_BUFFERS;
 162        lp->lance.rx_ring_mod_mask = RX_RING_MOD_MASK;
 163        lp->lance.tx_ring_mod_mask = TX_RING_MOD_MASK;
 164}
 165
 166/* This is disgusting. We have to check the DIO status register for ack every
 167 * time we read or write the LANCE registers.
 168 */
 169static void hplance_writerap(void *priv, unsigned short value)
 170{
 171        struct lance_private *lp = (struct lance_private *)priv;
 172        do {
 173                out_be16(lp->base + HPLANCE_REGOFF + LANCE_RAP, value);
 174        } while ((in_8(lp->base + HPLANCE_STATUS) & LE_ACK) == 0);
 175}
 176
 177static void hplance_writerdp(void *priv, unsigned short value)
 178{
 179        struct lance_private *lp = (struct lance_private *)priv;
 180        do {
 181                out_be16(lp->base + HPLANCE_REGOFF + LANCE_RDP, value);
 182        } while ((in_8(lp->base + HPLANCE_STATUS) & LE_ACK) == 0);
 183}
 184
 185static unsigned short hplance_readrdp(void *priv)
 186{
 187        struct lance_private *lp = (struct lance_private *)priv;
 188        __u16 value;
 189        do {
 190                value = in_be16(lp->base + HPLANCE_REGOFF + LANCE_RDP);
 191        } while ((in_8(lp->base + HPLANCE_STATUS) & LE_ACK) == 0);
 192        return value;
 193}
 194
 195static int hplance_open(struct net_device *dev)
 196{
 197        int status;
 198        struct lance_private *lp = netdev_priv(dev);
 199
 200        status = lance_open(dev);                 /* call generic lance open code */
 201        if (status)
 202                return status;
 203        /* enable interrupts at board level. */
 204        out_8(lp->base + HPLANCE_STATUS, LE_IE);
 205
 206        return 0;
 207}
 208
 209static int hplance_close(struct net_device *dev)
 210{
 211        struct lance_private *lp = netdev_priv(dev);
 212
 213        out_8(lp->base + HPLANCE_STATUS, 0);    /* disable interrupts at boardlevel */
 214        lance_close(dev);
 215        return 0;
 216}
 217
 218static int __init hplance_init_module(void)
 219{
 220        return dio_register_driver(&hplance_driver);
 221}
 222
 223static void __exit hplance_cleanup_module(void)
 224{
 225        dio_unregister_driver(&hplance_driver);
 226}
 227
 228module_init(hplance_init_module);
 229module_exit(hplance_cleanup_module);
 230
 231MODULE_LICENSE("GPL");
 232