LXR linux/drivers/staging/fbtft/fb

   1// SPDX-License-Identifier: GPL-2.0+
   2/*
   3 * FB driver for the uPD161704 LCD Controller
   4 *
   5 * Copyright (C) 2014 Seong-Woo Kim
   6 *
   7 * Based on fb_ili9325.c by Noralf Tronnes
   8 * Based on ili9325.c by Jeroen Domburg
   9 * Init code from UTFT library by Henning Karlsen
  10 */
  11
  12#include <linux/module.h>
  13#include <linux/kernel.h>
  14#include <linux/init.h>
  15#include <linux/gpio.h>
  16#include <linux/delay.h>
  17
  18#include "fbtft.h"
  19
  20#define DRVNAME         "fb_bd663474"
  21#define WIDTH           240
  22#define HEIGHT          320
  23#define BPP             16
  24
  25static int init_display(struct fbtft_par *par)
  26{
  27        if (par->gpio.cs != -1)
  28                gpio_set_value(par->gpio.cs, 0);  /* Activate chip */
  29
  30        par->fbtftops.reset(par);
  31
  32        /* Initialization sequence from Lib_UTFT */
  33
  34        /* oscillator start */
  35        write_reg(par, 0x000, 0x0001);  /*oscillator 0: stop, 1: operation */
  36        mdelay(10);
  37
  38        /* Power settings */
  39        write_reg(par, 0x100, 0x0000); /* power supply setup */
  40        write_reg(par, 0x101, 0x0000);
  41        write_reg(par, 0x102, 0x3110);
  42        write_reg(par, 0x103, 0xe200);
  43        write_reg(par, 0x110, 0x009d);
  44        write_reg(par, 0x111, 0x0022);
  45        write_reg(par, 0x100, 0x0120);
  46        mdelay(20);
  47
  48        write_reg(par, 0x100, 0x3120);
  49        mdelay(80);
  50        /* Display control */
  51        write_reg(par, 0x001, 0x0100);
  52        write_reg(par, 0x002, 0x0000);
  53        write_reg(par, 0x003, 0x1230);
  54        write_reg(par, 0x006, 0x0000);
  55        write_reg(par, 0x007, 0x0101);
  56        write_reg(par, 0x008, 0x0808);
  57        write_reg(par, 0x009, 0x0000);
  58        write_reg(par, 0x00b, 0x0000);
  59        write_reg(par, 0x00c, 0x0000);
  60        write_reg(par, 0x00d, 0x0018);
  61        /* LTPS control settings */
  62        write_reg(par, 0x012, 0x0000);
  63        write_reg(par, 0x013, 0x0000);
  64        write_reg(par, 0x018, 0x0000);
  65        write_reg(par, 0x019, 0x0000);
  66
  67        write_reg(par, 0x203, 0x0000);
  68        write_reg(par, 0x204, 0x0000);
  69
  70        write_reg(par, 0x210, 0x0000);
  71        write_reg(par, 0x211, 0x00ef);
  72        write_reg(par, 0x212, 0x0000);
  73        write_reg(par, 0x213, 0x013f);
  74        write_reg(par, 0x214, 0x0000);
  75        write_reg(par, 0x215, 0x0000);
  76        write_reg(par, 0x216, 0x0000);
  77        write_reg(par, 0x217, 0x0000);
  78
  79        /* Gray scale settings */
  80        write_reg(par, 0x300, 0x5343);
  81        write_reg(par, 0x301, 0x1021);
  82        write_reg(par, 0x302, 0x0003);
  83        write_reg(par, 0x303, 0x0011);
  84        write_reg(par, 0x304, 0x050a);
  85        write_reg(par, 0x305, 0x4342);
  86        write_reg(par, 0x306, 0x1100);
  87        write_reg(par, 0x307, 0x0003);
  88        write_reg(par, 0x308, 0x1201);
  89        write_reg(par, 0x309, 0x050a);
  90
  91        /* RAM access settings */
  92        write_reg(par, 0x400, 0x4027);
  93        write_reg(par, 0x401, 0x0000);
  94        write_reg(par, 0x402, 0x0000);  /* First screen drive position (1) */
  95        write_reg(par, 0x403, 0x013f);  /* First screen drive position (2) */
  96        write_reg(par, 0x404, 0x0000);
  97
  98        write_reg(par, 0x200, 0x0000);
  99        write_reg(par, 0x201, 0x0000);
 100        write_reg(par, 0x100, 0x7120);
 101        write_reg(par, 0x007, 0x0103);
 102        mdelay(10);
 103        write_reg(par, 0x007, 0x0113);
 104
 105        return 0;
 106}
 107
 108static void set_addr_win(struct fbtft_par *par, int xs, int ys, int xe, int ye)
 109{
 110        switch (par->info->var.rotate) {
 111        /* R200h = Horizontal GRAM Start Address */
 112        /* R201h = Vertical GRAM Start Address */
 113        case 0:
 114                write_reg(par, 0x0200, xs);
 115                write_reg(par, 0x0201, ys);
 116                break;
 117        case 180:
 118                write_reg(par, 0x0200, WIDTH - 1 - xs);
 119                write_reg(par, 0x0201, HEIGHT - 1 - ys);
 120                break;
 121        case 270:
 122                write_reg(par, 0x0200, WIDTH - 1 - ys);
 123                write_reg(par, 0x0201, xs);
 124                break;
 125        case 90:
 126                write_reg(par, 0x0200, ys);
 127                write_reg(par, 0x0201, HEIGHT - 1 - xs);
 128                break;
 129        }
 130        write_reg(par, 0x202); /* Write Data to GRAM */
 131}
 132
 133static int set_var(struct fbtft_par *par)
 134{
 135        switch (par->info->var.rotate) {
 136        /* AM: GRAM update direction */
 137        case 0:
 138                write_reg(par, 0x003, 0x1230);
 139                break;
 140        case 180:
 141                write_reg(par, 0x003, 0x1200);
 142                break;
 143        case 270:
 144                write_reg(par, 0x003, 0x1228);
 145                break;
 146        case 90:
 147                write_reg(par, 0x003, 0x1218);
 148                break;
 149        }
 150
 151        return 0;
 152}
 153
 154static struct fbtft_display display = {
 155        .regwidth = 16,
 156        .width = WIDTH,
 157        .height = HEIGHT,
 158        .bpp = BPP,
 159        .fbtftops = {
 160                .init_display = init_display,
 161                .set_addr_win = set_addr_win,
 162                .set_var = set_var,
 163        },
 164};
 165
 166FBTFT_REGISTER_DRIVER(DRVNAME, "hitachi,bd663474", &display);
 167
 168MODULE_ALIAS("spi:" DRVNAME);
 169MODULE_ALIAS("platform:" DRVNAME);
 170MODULE_ALIAS("spi:bd663474");
 171MODULE_ALIAS("platform:bd663474");
 172
 173MODULE_DESCRIPTION("FB driver for the uPD161704 LCD Controller");
 174MODULE_AUTHOR("Seong-Woo Kim");
 175MODULE_LICENSE("GPL");
 176