1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18#include <linux/module.h>
19#include <linux/kernel.h>
20#include <linux/init.h>
21#include <linux/delay.h>
22#include <linux/gpio.h>
23#include <linux/fb.h>
24#include <linux/lcd.h>
25#include <linux/spi/spi.h>
26#include <linux/spi/corgi_lcd.h>
27#include <linux/slab.h>
28#include <asm/mach/sharpsl_param.h>
29
30#define POWER_IS_ON(pwr) ((pwr) <= FB_BLANK_NORMAL)
31
32
33#define RESCTL_ADRS 0x00
34#define PHACTRL_ADRS 0x01
35#define DUTYCTRL_ADRS 0x02
36#define POWERREG0_ADRS 0x03
37#define POWERREG1_ADRS 0x04
38#define GPOR3_ADRS 0x05
39#define PICTRL_ADRS 0x06
40#define POLCTRL_ADRS 0x07
41
42
43#define RESCTL_QVGA 0x01
44#define RESCTL_VGA 0x00
45
46#define POWER1_VW_ON 0x01
47#define POWER1_GVSS_ON 0x02
48#define POWER1_VDD_ON 0x04
49
50#define POWER1_VW_OFF 0x00
51#define POWER1_GVSS_OFF 0x00
52#define POWER1_VDD_OFF 0x00
53
54#define POWER0_COM_DCLK 0x01
55#define POWER0_COM_DOUT 0x02
56#define POWER0_DAC_ON 0x04
57#define POWER0_COM_ON 0x08
58#define POWER0_VCC5_ON 0x10
59
60#define POWER0_DAC_OFF 0x00
61#define POWER0_COM_OFF 0x00
62#define POWER0_VCC5_OFF 0x00
63
64#define PICTRL_INIT_STATE 0x01
65#define PICTRL_INIOFF 0x02
66#define PICTRL_POWER_DOWN 0x04
67#define PICTRL_COM_SIGNAL_OFF 0x08
68#define PICTRL_DAC_SIGNAL_OFF 0x10
69
70#define POLCTRL_SYNC_POL_FALL 0x01
71#define POLCTRL_EN_POL_FALL 0x02
72#define POLCTRL_DATA_POL_FALL 0x04
73#define POLCTRL_SYNC_ACT_H 0x08
74#define POLCTRL_EN_ACT_L 0x10
75
76#define POLCTRL_SYNC_POL_RISE 0x00
77#define POLCTRL_EN_POL_RISE 0x00
78#define POLCTRL_DATA_POL_RISE 0x00
79#define POLCTRL_SYNC_ACT_L 0x00
80#define POLCTRL_EN_ACT_H 0x00
81
82#define PHACTRL_PHASE_MANUAL 0x01
83#define DEFAULT_PHAD_QVGA (9)
84#define DEFAULT_COMADJ (125)
85
86struct corgi_lcd {
87 struct spi_device *spi_dev;
88 struct lcd_device *lcd_dev;
89 struct backlight_device *bl_dev;
90
91 int limit_mask;
92 int intensity;
93 int power;
94 int mode;
95 char buf[2];
96
97 int gpio_backlight_on;
98 int gpio_backlight_cont;
99 int gpio_backlight_cont_inverted;
100
101 void (*kick_battery)(void);
102};
103
104static int corgi_ssp_lcdtg_send(struct corgi_lcd *lcd, int reg, uint8_t val);
105
106static struct corgi_lcd *the_corgi_lcd;
107static unsigned long corgibl_flags;
108#define CORGIBL_SUSPENDED 0x01
109#define CORGIBL_BATTLOW 0x02
110
111
112
113
114
115static void lcdtg_ssp_i2c_send(struct corgi_lcd *lcd, uint8_t data)
116{
117 corgi_ssp_lcdtg_send(lcd, POWERREG0_ADRS, data);
118 udelay(10);
119}
120
121static void lcdtg_i2c_send_bit(struct corgi_lcd *lcd, uint8_t data)
122{
123 lcdtg_ssp_i2c_send(lcd, data);
124 lcdtg_ssp_i2c_send(lcd, data | POWER0_COM_DCLK);
125 lcdtg_ssp_i2c_send(lcd, data);
126}
127
128static void lcdtg_i2c_send_start(struct corgi_lcd *lcd, uint8_t base)
129{
130 lcdtg_ssp_i2c_send(lcd, base | POWER0_COM_DCLK | POWER0_COM_DOUT);
131 lcdtg_ssp_i2c_send(lcd, base | POWER0_COM_DCLK);
132 lcdtg_ssp_i2c_send(lcd, base);
133}
134
135static void lcdtg_i2c_send_stop(struct corgi_lcd *lcd, uint8_t base)
136{
137 lcdtg_ssp_i2c_send(lcd, base);
138 lcdtg_ssp_i2c_send(lcd, base | POWER0_COM_DCLK);
139 lcdtg_ssp_i2c_send(lcd, base | POWER0_COM_DCLK | POWER0_COM_DOUT);
140}
141
142static void lcdtg_i2c_send_byte(struct corgi_lcd *lcd,
143 uint8_t base, uint8_t data)
144{
145 int i;
146
147 for (i = 0; i < 8; i++) {
148 if (data & 0x80)
149 lcdtg_i2c_send_bit(lcd, base | POWER0_COM_DOUT);
150 else
151 lcdtg_i2c_send_bit(lcd, base);
152 data <<= 1;
153 }
154}
155
156static void lcdtg_i2c_wait_ack(struct corgi_lcd *lcd, uint8_t base)
157{
158 lcdtg_i2c_send_bit(lcd, base);
159}
160
161static void lcdtg_set_common_voltage(struct corgi_lcd *lcd,
162 uint8_t base_data, uint8_t data)
163{
164
165 lcdtg_i2c_send_start(lcd, base_data);
166 lcdtg_i2c_send_byte(lcd, base_data, 0x9c);
167 lcdtg_i2c_wait_ack(lcd, base_data);
168 lcdtg_i2c_send_byte(lcd, base_data, 0x00);
169 lcdtg_i2c_wait_ack(lcd, base_data);
170 lcdtg_i2c_send_byte(lcd, base_data, data);
171 lcdtg_i2c_wait_ack(lcd, base_data);
172 lcdtg_i2c_send_stop(lcd, base_data);
173}
174
175static int corgi_ssp_lcdtg_send(struct corgi_lcd *lcd, int adrs, uint8_t data)
176{
177 struct spi_message msg;
178 struct spi_transfer xfer = {
179 .len = 1,
180 .cs_change = 0,
181 .tx_buf = lcd->buf,
182 };
183
184 lcd->buf[0] = ((adrs & 0x07) << 5) | (data & 0x1f);
185 spi_message_init(&msg);
186 spi_message_add_tail(&xfer, &msg);
187
188 return spi_sync(lcd->spi_dev, &msg);
189}
190
191
192static void lcdtg_set_phadadj(struct corgi_lcd *lcd, int mode)
193{
194 int adj;
195
196 switch (mode) {
197 case CORGI_LCD_MODE_VGA:
198
199 adj = sharpsl_param.phadadj;
200 adj = (adj < 0) ? PHACTRL_PHASE_MANUAL :
201 PHACTRL_PHASE_MANUAL | ((adj & 0xf) << 1);
202 break;
203 case CORGI_LCD_MODE_QVGA:
204 default:
205
206 adj = (DEFAULT_PHAD_QVGA << 1) | PHACTRL_PHASE_MANUAL;
207 break;
208 }
209
210 corgi_ssp_lcdtg_send(lcd, PHACTRL_ADRS, adj);
211}
212
213static void corgi_lcd_power_on(struct corgi_lcd *lcd)
214{
215 int comadj;
216
217
218 corgi_ssp_lcdtg_send(lcd, PICTRL_ADRS,
219 PICTRL_POWER_DOWN | PICTRL_INIOFF |
220 PICTRL_INIT_STATE | PICTRL_COM_SIGNAL_OFF |
221 PICTRL_DAC_SIGNAL_OFF);
222
223 corgi_ssp_lcdtg_send(lcd, POWERREG0_ADRS,
224 POWER0_COM_DCLK | POWER0_COM_DOUT | POWER0_DAC_OFF |
225 POWER0_COM_OFF | POWER0_VCC5_OFF);
226
227 corgi_ssp_lcdtg_send(lcd, POWERREG1_ADRS,
228 POWER1_VW_OFF | POWER1_GVSS_OFF | POWER1_VDD_OFF);
229
230
231 corgi_ssp_lcdtg_send(lcd, POWERREG1_ADRS,
232 POWER1_VW_OFF | POWER1_GVSS_OFF | POWER1_VDD_ON);
233 mdelay(3);
234
235
236 corgi_ssp_lcdtg_send(lcd, POWERREG0_ADRS,
237 POWER0_COM_DCLK | POWER0_COM_DOUT | POWER0_DAC_ON |
238 POWER0_COM_OFF | POWER0_VCC5_OFF);
239
240
241
242 corgi_ssp_lcdtg_send(lcd, PICTRL_ADRS,
243 PICTRL_INIT_STATE | PICTRL_COM_SIGNAL_OFF);
244
245
246 comadj = sharpsl_param.comadj;
247 if (comadj < 0)
248 comadj = DEFAULT_COMADJ;
249
250 lcdtg_set_common_voltage(lcd, POWER0_DAC_ON | POWER0_COM_OFF |
251 POWER0_VCC5_OFF, comadj);
252
253
254 corgi_ssp_lcdtg_send(lcd, POWERREG0_ADRS,
255 POWER0_COM_DCLK | POWER0_COM_DOUT | POWER0_DAC_ON |
256 POWER0_COM_OFF | POWER0_VCC5_ON);
257
258
259 corgi_ssp_lcdtg_send(lcd, POWERREG1_ADRS,
260 POWER1_VW_OFF | POWER1_GVSS_ON | POWER1_VDD_ON);
261 mdelay(2);
262
263
264 corgi_ssp_lcdtg_send(lcd, PICTRL_ADRS, PICTRL_INIT_STATE);
265
266
267 corgi_ssp_lcdtg_send(lcd, POWERREG0_ADRS,
268 POWER0_COM_DCLK | POWER0_COM_DOUT | POWER0_DAC_ON |
269 POWER0_COM_ON | POWER0_VCC5_ON);
270
271
272 corgi_ssp_lcdtg_send(lcd, POWERREG1_ADRS,
273 POWER1_VW_ON | POWER1_GVSS_ON | POWER1_VDD_ON);
274
275
276 corgi_ssp_lcdtg_send(lcd, PICTRL_ADRS, 0);
277
278
279 lcdtg_set_phadadj(lcd, lcd->mode);
280
281
282 corgi_ssp_lcdtg_send(lcd, POLCTRL_ADRS,
283 POLCTRL_SYNC_POL_RISE | POLCTRL_EN_POL_RISE |
284 POLCTRL_DATA_POL_RISE | POLCTRL_SYNC_ACT_L |
285 POLCTRL_EN_ACT_H);
286 udelay(1000);
287
288 switch (lcd->mode) {
289 case CORGI_LCD_MODE_VGA:
290 corgi_ssp_lcdtg_send(lcd, RESCTL_ADRS, RESCTL_VGA);
291 break;
292 case CORGI_LCD_MODE_QVGA:
293 default:
294 corgi_ssp_lcdtg_send(lcd, RESCTL_ADRS, RESCTL_QVGA);
295 break;
296 }
297}
298
299static void corgi_lcd_power_off(struct corgi_lcd *lcd)
300{
301
302 msleep(34);
303
304
305 corgi_ssp_lcdtg_send(lcd, POWERREG1_ADRS,
306 POWER1_VW_OFF | POWER1_GVSS_ON | POWER1_VDD_ON);
307
308
309 corgi_ssp_lcdtg_send(lcd, PICTRL_ADRS, PICTRL_COM_SIGNAL_OFF);
310 corgi_ssp_lcdtg_send(lcd, POWERREG0_ADRS,
311 POWER0_DAC_ON | POWER0_COM_OFF | POWER0_VCC5_ON);
312
313
314 lcdtg_set_common_voltage(lcd, POWER0_DAC_ON | POWER0_COM_OFF |
315 POWER0_VCC5_ON, 0);
316
317
318 corgi_ssp_lcdtg_send(lcd, POWERREG1_ADRS,
319 POWER1_VW_OFF | POWER1_GVSS_OFF | POWER1_VDD_ON);
320
321
322 corgi_ssp_lcdtg_send(lcd, POWERREG0_ADRS,
323 POWER0_DAC_ON | POWER0_COM_OFF | POWER0_VCC5_OFF);
324
325
326 corgi_ssp_lcdtg_send(lcd, PICTRL_ADRS,
327 PICTRL_INIOFF | PICTRL_DAC_SIGNAL_OFF |
328 PICTRL_POWER_DOWN | PICTRL_COM_SIGNAL_OFF);
329
330
331 corgi_ssp_lcdtg_send(lcd, POWERREG0_ADRS,
332 POWER0_DAC_OFF | POWER0_COM_OFF | POWER0_VCC5_OFF);
333
334
335 corgi_ssp_lcdtg_send(lcd, POWERREG1_ADRS,
336 POWER1_VW_OFF | POWER1_GVSS_OFF | POWER1_VDD_OFF);
337}
338
339static int corgi_lcd_set_mode(struct lcd_device *ld, struct fb_videomode *m)
340{
341 struct corgi_lcd *lcd = lcd_get_data(ld);
342 int mode = CORGI_LCD_MODE_QVGA;
343
344 if (m->xres == 640 || m->xres == 480)
345 mode = CORGI_LCD_MODE_VGA;
346
347 if (lcd->mode == mode)
348 return 0;
349
350 lcdtg_set_phadadj(lcd, mode);
351
352 switch (mode) {
353 case CORGI_LCD_MODE_VGA:
354 corgi_ssp_lcdtg_send(lcd, RESCTL_ADRS, RESCTL_VGA);
355 break;
356 case CORGI_LCD_MODE_QVGA:
357 default:
358 corgi_ssp_lcdtg_send(lcd, RESCTL_ADRS, RESCTL_QVGA);
359 break;
360 }
361
362 lcd->mode = mode;
363 return 0;
364}
365
366static int corgi_lcd_set_power(struct lcd_device *ld, int power)
367{
368 struct corgi_lcd *lcd = lcd_get_data(ld);
369
370 if (POWER_IS_ON(power) && !POWER_IS_ON(lcd->power))
371 corgi_lcd_power_on(lcd);
372
373 if (!POWER_IS_ON(power) && POWER_IS_ON(lcd->power))
374 corgi_lcd_power_off(lcd);
375
376 lcd->power = power;
377 return 0;
378}
379
380static int corgi_lcd_get_power(struct lcd_device *ld)
381{
382 struct corgi_lcd *lcd = lcd_get_data(ld);
383
384 return lcd->power;
385}
386
387static struct lcd_ops corgi_lcd_ops = {
388 .get_power = corgi_lcd_get_power,
389 .set_power = corgi_lcd_set_power,
390 .set_mode = corgi_lcd_set_mode,
391};
392
393static int corgi_bl_get_intensity(struct backlight_device *bd)
394{
395 struct corgi_lcd *lcd = bl_get_data(bd);
396
397 return lcd->intensity;
398}
399
400static int corgi_bl_set_intensity(struct corgi_lcd *lcd, int intensity)
401{
402 int cont;
403
404 if (intensity > 0x10)
405 intensity += 0x10;
406
407 corgi_ssp_lcdtg_send(lcd, DUTYCTRL_ADRS, intensity);
408
409
410 cont = !!(intensity & 0x20) ^ lcd->gpio_backlight_cont_inverted;
411
412 if (gpio_is_valid(lcd->gpio_backlight_cont))
413 gpio_set_value_cansleep(lcd->gpio_backlight_cont, cont);
414
415 if (gpio_is_valid(lcd->gpio_backlight_on))
416 gpio_set_value_cansleep(lcd->gpio_backlight_on, intensity);
417
418 if (lcd->kick_battery)
419 lcd->kick_battery();
420
421 lcd->intensity = intensity;
422 return 0;
423}
424
425static int corgi_bl_update_status(struct backlight_device *bd)
426{
427 struct corgi_lcd *lcd = bl_get_data(bd);
428 int intensity = bd->props.brightness;
429
430 if (bd->props.power != FB_BLANK_UNBLANK)
431 intensity = 0;
432
433 if (bd->props.fb_blank != FB_BLANK_UNBLANK)
434 intensity = 0;
435
436 if (corgibl_flags & CORGIBL_SUSPENDED)
437 intensity = 0;
438
439 if ((corgibl_flags & CORGIBL_BATTLOW) && intensity > lcd->limit_mask)
440 intensity = lcd->limit_mask;
441
442 return corgi_bl_set_intensity(lcd, intensity);
443}
444
445void corgi_lcd_limit_intensity(int limit)
446{
447 if (limit)
448 corgibl_flags |= CORGIBL_BATTLOW;
449 else
450 corgibl_flags &= ~CORGIBL_BATTLOW;
451
452 backlight_update_status(the_corgi_lcd->bl_dev);
453}
454EXPORT_SYMBOL(corgi_lcd_limit_intensity);
455
456static const struct backlight_ops corgi_bl_ops = {
457 .get_brightness = corgi_bl_get_intensity,
458 .update_status = corgi_bl_update_status,
459};
460
461#ifdef CONFIG_PM_SLEEP
462static int corgi_lcd_suspend(struct device *dev)
463{
464 struct corgi_lcd *lcd = dev_get_drvdata(dev);
465
466 corgibl_flags |= CORGIBL_SUSPENDED;
467 corgi_bl_set_intensity(lcd, 0);
468 corgi_lcd_set_power(lcd->lcd_dev, FB_BLANK_POWERDOWN);
469 return 0;
470}
471
472static int corgi_lcd_resume(struct device *dev)
473{
474 struct corgi_lcd *lcd = dev_get_drvdata(dev);
475
476 corgibl_flags &= ~CORGIBL_SUSPENDED;
477 corgi_lcd_set_power(lcd->lcd_dev, FB_BLANK_UNBLANK);
478 backlight_update_status(lcd->bl_dev);
479 return 0;
480}
481#endif
482
483static SIMPLE_DEV_PM_OPS(corgi_lcd_pm_ops, corgi_lcd_suspend, corgi_lcd_resume);
484
485static int setup_gpio_backlight(struct corgi_lcd *lcd,
486 struct corgi_lcd_platform_data *pdata)
487{
488 struct spi_device *spi = lcd->spi_dev;
489 int err;
490
491 lcd->gpio_backlight_on = -1;
492 lcd->gpio_backlight_cont = -1;
493
494 if (gpio_is_valid(pdata->gpio_backlight_on)) {
495 err = devm_gpio_request(&spi->dev, pdata->gpio_backlight_on,
496 "BL_ON");
497 if (err) {
498 dev_err(&spi->dev,
499 "failed to request GPIO%d for backlight_on\n",
500 pdata->gpio_backlight_on);
501 return err;
502 }
503
504 lcd->gpio_backlight_on = pdata->gpio_backlight_on;
505 gpio_direction_output(lcd->gpio_backlight_on, 0);
506 }
507
508 if (gpio_is_valid(pdata->gpio_backlight_cont)) {
509 err = devm_gpio_request(&spi->dev, pdata->gpio_backlight_cont,
510 "BL_CONT");
511 if (err) {
512 dev_err(&spi->dev,
513 "failed to request GPIO%d for backlight_cont\n",
514 pdata->gpio_backlight_cont);
515 return err;
516 }
517
518 lcd->gpio_backlight_cont = pdata->gpio_backlight_cont;
519
520
521
522
523 if (gpio_is_valid(lcd->gpio_backlight_on)) {
524 lcd->gpio_backlight_cont_inverted = 1;
525 gpio_direction_output(lcd->gpio_backlight_cont, 1);
526 } else {
527 lcd->gpio_backlight_cont_inverted = 0;
528 gpio_direction_output(lcd->gpio_backlight_cont, 0);
529 }
530 }
531 return 0;
532}
533
534static int corgi_lcd_probe(struct spi_device *spi)
535{
536 struct backlight_properties props;
537 struct corgi_lcd_platform_data *pdata = dev_get_platdata(&spi->dev);
538 struct corgi_lcd *lcd;
539 int ret = 0;
540
541 if (pdata == NULL) {
542 dev_err(&spi->dev, "platform data not available\n");
543 return -EINVAL;
544 }
545
546 lcd = devm_kzalloc(&spi->dev, sizeof(struct corgi_lcd), GFP_KERNEL);
547 if (!lcd)
548 return -ENOMEM;
549
550 lcd->spi_dev = spi;
551
552 lcd->lcd_dev = devm_lcd_device_register(&spi->dev, "corgi_lcd",
553 &spi->dev, lcd, &corgi_lcd_ops);
554 if (IS_ERR(lcd->lcd_dev))
555 return PTR_ERR(lcd->lcd_dev);
556
557 lcd->power = FB_BLANK_POWERDOWN;
558 lcd->mode = (pdata) ? pdata->init_mode : CORGI_LCD_MODE_VGA;
559
560 memset(&props, 0, sizeof(struct backlight_properties));
561 props.type = BACKLIGHT_RAW;
562 props.max_brightness = pdata->max_intensity;
563 lcd->bl_dev = devm_backlight_device_register(&spi->dev, "corgi_bl",
564 &spi->dev, lcd, &corgi_bl_ops,
565 &props);
566 if (IS_ERR(lcd->bl_dev))
567 return PTR_ERR(lcd->bl_dev);
568
569 lcd->bl_dev->props.brightness = pdata->default_intensity;
570 lcd->bl_dev->props.power = FB_BLANK_UNBLANK;
571
572 ret = setup_gpio_backlight(lcd, pdata);
573 if (ret)
574 return ret;
575
576 lcd->kick_battery = pdata->kick_battery;
577
578 spi_set_drvdata(spi, lcd);
579 corgi_lcd_set_power(lcd->lcd_dev, FB_BLANK_UNBLANK);
580 backlight_update_status(lcd->bl_dev);
581
582 lcd->limit_mask = pdata->limit_mask;
583 the_corgi_lcd = lcd;
584 return 0;
585}
586
587static int corgi_lcd_remove(struct spi_device *spi)
588{
589 struct corgi_lcd *lcd = spi_get_drvdata(spi);
590
591 lcd->bl_dev->props.power = FB_BLANK_UNBLANK;
592 lcd->bl_dev->props.brightness = 0;
593 backlight_update_status(lcd->bl_dev);
594 corgi_lcd_set_power(lcd->lcd_dev, FB_BLANK_POWERDOWN);
595 return 0;
596}
597
598static struct spi_driver corgi_lcd_driver = {
599 .driver = {
600 .name = "corgi-lcd",
601 .pm = &corgi_lcd_pm_ops,
602 },
603 .probe = corgi_lcd_probe,
604 .remove = corgi_lcd_remove,
605};
606
607module_spi_driver(corgi_lcd_driver);
608
609MODULE_DESCRIPTION("LCD and backlight driver for SHARP C7x0/Cxx00");
610MODULE_AUTHOR("Eric Miao <eric.miao@marvell.com>");
611MODULE_LICENSE("GPL");
612MODULE_ALIAS("spi:corgi-lcd");
613
