linux/drivers/gpu/drm/tve200/tve200_drm.h
<<
>>
Prefs
   1/*
   2 * Copyright (C) 2017 Linus Walleij <linus.walleij@linaro.org>
   3 * Parts of this file were based on sources as follows:
   4 *
   5 * Copyright (C) 2006-2008 Intel Corporation
   6 * Copyright (C) 2007 Amos Lee <amos_lee@storlinksemi.com>
   7 * Copyright (C) 2007 Dave Airlie <airlied@linux.ie>
   8 * Copyright (C) 2011 Texas Instruments
   9 * Copyright (C) 2017 Eric Anholt
  10 *
  11 * This program is free software and is provided to you under the terms of the
  12 * GNU General Public License version 2 as published by the Free Software
  13 * Foundation, and any use by you of this program is subject to the terms of
  14 * such GNU licence.
  15 */
  16
  17#ifndef _TVE200_DRM_H_
  18#define _TVE200_DRM_H_
  19
  20/* Bits 2-31 are valid physical base addresses */
  21#define TVE200_Y_FRAME_BASE_ADDR        0x00
  22#define TVE200_U_FRAME_BASE_ADDR        0x04
  23#define TVE200_V_FRAME_BASE_ADDR        0x08
  24
  25#define TVE200_INT_EN                   0x0C
  26#define TVE200_INT_CLR                  0x10
  27#define TVE200_INT_STAT                 0x14
  28#define TVE200_INT_BUS_ERR              BIT(7)
  29#define TVE200_INT_V_STATUS             BIT(6) /* vertical blank */
  30#define TVE200_INT_V_NEXT_FRAME         BIT(5)
  31#define TVE200_INT_U_NEXT_FRAME         BIT(4)
  32#define TVE200_INT_Y_NEXT_FRAME         BIT(3)
  33#define TVE200_INT_V_FIFO_UNDERRUN      BIT(2)
  34#define TVE200_INT_U_FIFO_UNDERRUN      BIT(1)
  35#define TVE200_INT_Y_FIFO_UNDERRUN      BIT(0)
  36#define TVE200_FIFO_UNDERRUNS           (TVE200_INT_V_FIFO_UNDERRUN | \
  37                                         TVE200_INT_U_FIFO_UNDERRUN | \
  38                                         TVE200_INT_Y_FIFO_UNDERRUN)
  39
  40#define TVE200_CTRL                     0x18
  41#define TVE200_CTRL_YUV420              BIT(31)
  42#define TVE200_CTRL_CSMODE              BIT(30)
  43#define TVE200_CTRL_NONINTERLACE        BIT(28) /* 0 = non-interlace CCIR656 */
  44#define TVE200_CTRL_TVCLKP              BIT(27) /* Inverted clock phase */
  45/* Bits 24..26 define the burst size after arbitration on the bus */
  46#define TVE200_CTRL_BURST_4_WORDS       (0 << 24)
  47#define TVE200_CTRL_BURST_8_WORDS       (1 << 24)
  48#define TVE200_CTRL_BURST_16_WORDS      (2 << 24)
  49#define TVE200_CTRL_BURST_32_WORDS      (3 << 24)
  50#define TVE200_CTRL_BURST_64_WORDS      (4 << 24)
  51#define TVE200_CTRL_BURST_128_WORDS     (5 << 24)
  52#define TVE200_CTRL_BURST_256_WORDS     (6 << 24)
  53#define TVE200_CTRL_BURST_0_WORDS       (7 << 24) /* ? */
  54/*
  55 * Bits 16..23 is the retry count*16 before issueing a new AHB transfer
  56 * on the AHB bus.
  57 */
  58#define TVE200_CTRL_RETRYCNT_MASK       GENMASK(23, 16)
  59#define TVE200_CTRL_RETRYCNT_16         (1 << 16)
  60#define TVE200_CTRL_BBBP                BIT(15) /* 0 = little-endian */
  61/* Bits 12..14 define the YCbCr ordering */
  62#define TVE200_CTRL_YCBCRODR_CB0Y0CR0Y1 (0 << 12)
  63#define TVE200_CTRL_YCBCRODR_Y0CB0Y1CR0 (1 << 12)
  64#define TVE200_CTRL_YCBCRODR_CR0Y0CB0Y1 (2 << 12)
  65#define TVE200_CTRL_YCBCRODR_Y1CB0Y0CR0 (3 << 12)
  66#define TVE200_CTRL_YCBCRODR_CR0Y1CB0Y0 (4 << 12)
  67#define TVE200_CTRL_YCBCRODR_Y1CR0Y0CB0 (5 << 12)
  68#define TVE200_CTRL_YCBCRODR_CB0Y1CR0Y0 (6 << 12)
  69#define TVE200_CTRL_YCBCRODR_Y0CR0Y1CB0 (7 << 12)
  70/* Bits 10..11 define the input resolution (framebuffer size) */
  71#define TVE200_CTRL_IPRESOL_CIF         (0 << 10)
  72#define TVE200_CTRL_IPRESOL_VGA         (1 << 10)
  73#define TVE200_CTRL_IPRESOL_D1          (2 << 10)
  74#define TVE200_CTRL_NTSC                BIT(9) /* 0 = PAL, 1 = NTSC */
  75#define TVE200_CTRL_INTERLACE           BIT(8) /* 1 = interlace, only for D1 */
  76#define TVE200_IPDMOD_RGB555            (0 << 6) /* TVE200_CTRL_YUV420 = 0 */
  77#define TVE200_IPDMOD_RGB565            (1 << 6)
  78#define TVE200_IPDMOD_RGB888            (2 << 6)
  79#define TVE200_IPDMOD_YUV420            (2 << 6) /* TVE200_CTRL_YUV420 = 1 */
  80#define TVE200_IPDMOD_YUV422            (3 << 6)
  81/* Bits 4 & 5 define when to fire the vblank IRQ */
  82#define TVE200_VSTSTYPE_VSYNC           (0 << 4) /* start of vsync */
  83#define TVE200_VSTSTYPE_VBP             (1 << 4) /* start of v back porch */
  84#define TVE200_VSTSTYPE_VAI             (2 << 4) /* start of v active image */
  85#define TVE200_VSTSTYPE_VFP             (3 << 4) /* start of v front porch */
  86#define TVE200_VSTSTYPE_BITS            (BIT(4) | BIT(5))
  87#define TVE200_BGR                      BIT(1) /* 0 = RGB, 1 = BGR */
  88#define TVE200_TVEEN                    BIT(0) /* Enable TVE block */
  89
  90#define TVE200_CTRL_2                   0x1c
  91#define TVE200_CTRL_3                   0x20
  92
  93#define TVE200_CTRL_4                   0x24
  94#define TVE200_CTRL_4_RESET             BIT(0) /* triggers reset of TVE200 */
  95
  96#include <drm/drm_gem.h>
  97#include <drm/drm_simple_kms_helper.h>
  98
  99struct tve200_drm_dev_private {
 100        struct drm_device *drm;
 101
 102        struct drm_connector *connector;
 103        struct drm_panel *panel;
 104        struct drm_bridge *bridge;
 105        struct drm_simple_display_pipe pipe;
 106
 107        void *regs;
 108        struct clk *pclk;
 109        struct clk *clk;
 110};
 111
 112#define to_tve200_connector(x) \
 113        container_of(x, struct tve200_drm_connector, connector)
 114
 115int tve200_display_init(struct drm_device *dev);
 116irqreturn_t tve200_irq(int irq, void *data);
 117int tve200_connector_init(struct drm_device *dev);
 118int tve200_encoder_init(struct drm_device *dev);
 119int tve200_dumb_create(struct drm_file *file_priv,
 120                      struct drm_device *dev,
 121                      struct drm_mode_create_dumb *args);
 122
 123#endif /* _TVE200_DRM_H_ */
 124