1/* SPDX-License-Identifier: GPL-2.0 */ 2/****************************************************************************** 3 * 4 * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved. 5 * 6 ******************************************************************************/ 7 8#ifndef __HAL_PG_H__ 9#define __HAL_PG_H__ 10 11#define MAX_RF_PATH 4 12/* MAX_TX_COUNT must always be set to 4, otherwise the read efuse table 13 * sequence will be wrong. 14 */ 15#define MAX_TX_COUNT 4 16 17/* For VHT series TX power by rate table. */ 18/* VHT TX power by rate off setArray = */ 19/* Band:-2G&5G = 0 / 1 */ 20/* RF: at most 4*4 = ABCD = 0/1/2/3 */ 21/* CCK = 0 OFDM = 1/2 HT-MCS 0-15 =3/4/56 VHT =7/8/9/10/11 */ 22#define TX_PWR_BY_RATE_NUM_BAND 2 23#define TX_PWR_BY_RATE_NUM_RF 4 24#define TX_PWR_BY_RATE_NUM_RATE 84 25#define MAX_RF_PATH_NUM 2 26#define MAX_CHNL_GROUP_24G 6 27#define EEPROM_DEFAULT_BOARD_OPTION 0x00 28 29/* EEPROM/Efuse PG Offset for 8723BE/8723BU/8723BS */ 30/* 0x10 ~ 0x63 = TX power area. */ 31#define EEPROM_TX_PWR_INX_8723B 0x10 32/* New EFUSE default value */ 33#define EEPROM_DEFAULT_24G_INDEX 0x2D 34#define EEPROM_DEFAULT_24G_HT20_DIFF 0X02 35#define EEPROM_DEFAULT_24G_OFDM_DIFF 0X04 36#define EEPROM_Default_ThermalMeter_8723B 0x18 37#define EEPROM_Default_CrystalCap_8723B 0x20 38 39#define EEPROM_ChannelPlan_8723B 0xB8 40#define EEPROM_XTAL_8723B 0xB9 41#define EEPROM_THERMAL_METER_8723B 0xBA 42 43#define EEPROM_RF_BOARD_OPTION_8723B 0xC1 44#define EEPROM_RF_BT_SETTING_8723B 0xC3 45#define EEPROM_VERSION_8723B 0xC4 46#define EEPROM_CustomID_8723B 0xC5 47#define EEPROM_DEFAULT_DIFF 0XFE 48 49/* RTL8723BS */ 50#define EEPROM_MAC_ADDR_8723BS 0x11A 51#define EEPROM_Voltage_ADDR_8723B 0x8 52#define RTL_EEPROM_ID 0x8129 53 54struct TxPowerInfo24G { 55 u8 IndexCCK_Base[MAX_RF_PATH][MAX_CHNL_GROUP_24G]; 56 u8 IndexBW40_Base[MAX_RF_PATH][MAX_CHNL_GROUP_24G]; 57 /* If only one tx, only BW20 and OFDM are used. */ 58 s8 CCK_Diff[MAX_RF_PATH][MAX_TX_COUNT]; 59 s8 OFDM_Diff[MAX_RF_PATH][MAX_TX_COUNT]; 60 s8 BW20_Diff[MAX_RF_PATH][MAX_TX_COUNT]; 61 s8 BW40_Diff[MAX_RF_PATH][MAX_TX_COUNT]; 62}; 63 64enum { 65 Ant_x2 = 0, 66 Ant_x1 = 1 67}; 68 69enum { 70 BT_RTL8723B = 8, 71}; 72 73#endif 74