linux/drivers/staging/rtl8723bs/include/rtw_mlme.h
<<
>>
Prefs 
   1/* SPDX-License-Identifier: GPL-2.0 */
   2/******************************************************************************
   3 *
   4 * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
   5 *
   6 ******************************************************************************/
   7#ifndef __RTW_MLME_H_
   8#define __RTW_MLME_H_
   9
  10
  11#define MAX_BSS_CNT     128
  12/* define   MAX_JOIN_TIMEOUT    2000 */
  13/* define   MAX_JOIN_TIMEOUT    2500 */
  14#define   MAX_JOIN_TIMEOUT      6500
  15
  16/*      Commented by Albert 20101105 */
  17/*      Increase the scanning timeout because of increasing the SURVEY_TO value. */
  18
  19#define         SCANNING_TIMEOUT        8000
  20
  21#ifdef PALTFORM_OS_WINCE
  22#define SCANQUEUE_LIFETIME 12000000 /*  unit:us */
  23#else
  24#define SCANQUEUE_LIFETIME 20000 /*  20sec, unit:msec */
  25#endif
  26
  27#define WIFI_NULL_STATE         0x00000000
  28#define WIFI_ASOC_STATE         0x00000001              /*  Under Linked state... */
  29#define WIFI_REASOC_STATE       0x00000002
  30#define WIFI_SLEEP_STATE        0x00000004
  31#define WIFI_STATION_STATE      0x00000008
  32#define WIFI_AP_STATE                   0x00000010
  33#define WIFI_ADHOC_STATE                0x00000020
  34#define WIFI_ADHOC_MASTER_STATE 0x00000040
  35#define WIFI_UNDER_LINKING      0x00000080
  36
  37#define WIFI_UNDER_WPS                  0x00000100
  38/* define       WIFI_UNDER_CMD                  0x00000200 */
  39/* define       WIFI_UNDER_P2P                  0x00000400 */
  40#define WIFI_STA_ALIVE_CHK_STATE        0x00000400
  41#define WIFI_SITE_MONITOR                       0x00000800              /* to indicate the station is under site surveying */
  42#ifdef WDS
  43#define WIFI_WDS                                0x00001000
  44#define WIFI_WDS_RX_BEACON      0x00002000              /*  already rx WDS AP beacon */
  45#endif
  46#ifdef AUTO_CONFIG
  47#define WIFI_AUTOCONF                   0x00004000
  48#define WIFI_AUTOCONF_IND       0x00008000
  49#endif
  50
  51/**
  52*  ========== P2P Section Start ===============
  53#define WIFI_P2P_LISTEN_STATE           0x00010000
  54#define WIFI_P2P_GROUP_FORMATION_STATE          0x00020000
  55  ========== P2P Section End ===============
  56*/
  57
  58/* ifdef UNDER_MPTEST */
  59#define WIFI_MP_STATE                                                   0x00010000
  60#define WIFI_MP_CTX_BACKGROUND                          0x00020000      /*  in continous tx background */
  61#define WIFI_MP_CTX_ST                                          0x00040000      /*  in continous tx with single-tone */
  62#define WIFI_MP_CTX_BACKGROUND_PENDING  0x00080000      /*  pending in continous tx background due to out of skb */
  63#define WIFI_MP_CTX_CCK_HW                                      0x00100000      /*  in continous tx */
  64#define WIFI_MP_CTX_CCK_CS                                      0x00200000      /*  in continous tx with carrier suppression */
  65#define   WIFI_MP_LPBK_STATE                                    0x00400000
  66/* endif */
  67
  68/* define _FW_UNDER_CMD         WIFI_UNDER_CMD */
  69#define _FW_UNDER_LINKING       WIFI_UNDER_LINKING
  70#define _FW_LINKED                      WIFI_ASOC_STATE
  71#define _FW_UNDER_SURVEY        WIFI_SITE_MONITOR
  72
  73
  74enum dot11AuthAlgrthmNum {
  75 dot11AuthAlgrthm_Open = 0,
  76 dot11AuthAlgrthm_Shared,
  77 dot11AuthAlgrthm_8021X,
  78 dot11AuthAlgrthm_Auto,
  79 dot11AuthAlgrthm_WAPI,
  80 dot11AuthAlgrthm_MaxNum
  81};
  82
  83/*  Scan type including active and passive scan. */
  84typedef enum _RT_SCAN_TYPE
  85{
  86        SCAN_PASSIVE,
  87        SCAN_ACTIVE,
  88        SCAN_MIX,
  89}RT_SCAN_TYPE, *PRT_SCAN_TYPE;
  90
  91enum  _BAND
  92{
  93        GHZ24_50 = 0,
  94        GHZ_50,
  95        GHZ_24,
  96        GHZ_MAX,
  97};
  98
  99#define rtw_band_valid(band) ((band) >= GHZ24_50 && (band) < GHZ_MAX)
 100
 101enum DriverInterface {
 102        DRIVER_WEXT =  1,
 103        DRIVER_CFG80211 = 2
 104};
 105
 106enum SCAN_RESULT_TYPE
 107{
 108        SCAN_RESULT_P2P_ONLY = 0,               /*      Will return all the P2P devices. */
 109        SCAN_RESULT_ALL = 1,                    /*      Will return all the scanned device, include AP. */
 110        SCAN_RESULT_WFD_TYPE = 2                /*      Will just return the correct WFD device. */
 111                                                                        /*      If this device is Miracast sink device, it will just return all the Miracast source devices. */
 112};
 113
 114/*
 115
 116there are several "locks" in mlme_priv,
 117since mlme_priv is a shared resource between many threads,
 118like ISR/Call-Back functions, the OID handlers, and even timer functions.
 119
 120
 121Each struct __queue has its own locks, already.
 122Other items are protected by mlme_priv.lock.
 123
 124To avoid possible dead lock, any thread trying to modifiying mlme_priv
 125SHALL not lock up more than one locks at a time!
 126
 127*/
 128
 129
 130#define traffic_threshold       10
 131#define traffic_scan_period     500
 132
 133struct sitesurvey_ctrl {
 134        u64     last_tx_pkts;
 135        uint    last_rx_pkts;
 136        sint    traffic_busy;
 137        _timer  sitesurvey_ctrl_timer;
 138};
 139
 140typedef struct _RT_LINK_DETECT_T{
 141        u32                     NumTxOkInPeriod;
 142        u32                     NumRxOkInPeriod;
 143        u32                     NumRxUnicastOkInPeriod;
 144        bool                    bBusyTraffic;
 145        bool                    bTxBusyTraffic;
 146        bool                    bRxBusyTraffic;
 147        bool                    bHigherBusyTraffic; /*  For interrupt migration purpose. */
 148        bool                    bHigherBusyRxTraffic; /*  We may disable Tx interrupt according as Rx traffic. */
 149        bool                    bHigherBusyTxTraffic; /*  We may disable Tx interrupt according as Tx traffic. */
 150        /* u8 TrafficBusyState; */
 151        u8 TrafficTransitionCount;
 152        u32 LowPowerTransitionCount;
 153}RT_LINK_DETECT_T, *PRT_LINK_DETECT_T;
 154
 155struct profile_info {
 156        u8 ssidlen;
 157        u8 ssid[ WLAN_SSID_MAXLEN ];
 158        u8 peermac[ ETH_ALEN ];
 159};
 160
 161struct tx_invite_req_info{
 162        u8                      token;
 163        u8                      benable;
 164        u8                      go_ssid[ WLAN_SSID_MAXLEN ];
 165        u8                      ssidlen;
 166        u8                      go_bssid[ ETH_ALEN ];
 167        u8                      peer_macaddr[ ETH_ALEN ];
 168        u8                      operating_ch;   /*      This information will be set by using the p2p_set op_ch =x */
 169        u8                      peer_ch;                /*      The listen channel for peer P2P device */
 170
 171};
 172
 173struct tx_invite_resp_info{
 174        u8                      token;  /*      Used to record the dialog token of p2p invitation request frame. */
 175};
 176
 177struct tx_provdisc_req_info{
 178        u16                             wps_config_method_request;      /*      Used when sending the provisioning request frame */
 179        u16                             peer_channel_num[2];            /*      The channel number which the receiver stands. */
 180        struct ndis_802_11_ssid ssid;
 181        u8                      peerDevAddr[ ETH_ALEN ];                /*      Peer device address */
 182        u8                      peerIFAddr[ ETH_ALEN ];         /*      Peer interface address */
 183        u8                      benable;                                        /*      This provision discovery request frame is trigger to send or not */
 184};
 185
 186struct rx_provdisc_req_info{    /* When peer device issue prov_disc_req first, we should store the following informations */
 187        u8                      peerDevAddr[ ETH_ALEN ];                /*      Peer device address */
 188        u8                      strconfig_method_desc_of_prov_disc_req[4];      /*      description for the config method located in the provisioning discovery request frame. */
 189                                                                                                                                        /*      The UI must know this information to know which config method the remote p2p device is requiring. */
 190};
 191
 192struct tx_nego_req_info{
 193        u16                             peer_channel_num[2];            /*      The channel number which the receiver stands. */
 194        u8                      peerDevAddr[ ETH_ALEN ];                /*      Peer device address */
 195        u8                      benable;                                        /*      This negoitation request frame is trigger to send or not */
 196};
 197
 198struct group_id_info{
 199        u8                      go_device_addr[ ETH_ALEN ];     /*      The GO's device address of this P2P group */
 200        u8                      ssid[ WLAN_SSID_MAXLEN ];       /*      The SSID of this P2P group */
 201};
 202
 203struct scan_limit_info{
 204        u8                      scan_op_ch_only;                        /*      When this flag is set, the driver should just scan the operation channel */
 205        u8                      operation_ch[2];                                /*      Store the operation channel of invitation request frame */
 206};
 207
 208struct cfg80211_wifidirect_info{
 209        _timer                                  remain_on_ch_timer;
 210        u8                              restore_channel;
 211        struct ieee80211_channel        remain_on_ch_channel;
 212        enum nl80211_channel_type       remain_on_ch_type;
 213        u64                                             remain_on_ch_cookie;
 214        bool is_ro_ch;
 215        unsigned long last_ro_ch_time; /* this will be updated at the beginning and end of ro_ch */
 216};
 217
 218struct wifidirect_info{
 219        struct adapter *                        padapter;
 220        _timer                                  find_phase_timer;
 221        _timer                                  restore_p2p_state_timer;
 222
 223        /*      Used to do the scanning. After confirming the peer is availalble, the driver transmits the P2P frame to peer. */
 224        _timer                                  pre_tx_scan_timer;
 225        _timer                                  reset_ch_sitesurvey;
 226        _timer                                  reset_ch_sitesurvey2;   /*      Just for resetting the scan limit function by using p2p nego */
 227        struct tx_provdisc_req_info tx_prov_disc_info;
 228        struct rx_provdisc_req_info rx_prov_disc_info;
 229        struct tx_invite_req_info invitereq_info;
 230        struct profile_info             profileinfo[ P2P_MAX_PERSISTENT_GROUP_NUM ];    /*      Store the profile information of persistent group */
 231        struct tx_invite_resp_info inviteresp_info;
 232        struct tx_nego_req_info nego_req_info;
 233        struct group_id_info    groupid_info;   /*      Store the group id information when doing the group negotiation handshake. */
 234        struct scan_limit_info  rx_invitereq_info;      /*      Used for get the limit scan channel from the Invitation procedure */
 235        struct scan_limit_info  p2p_info;               /*      Used for get the limit scan channel from the P2P negotiation handshake */
 236        enum P2P_ROLE                   role;
 237        enum P2P_STATE                  pre_p2p_state;
 238        enum P2P_STATE                  p2p_state;
 239        u8                              device_addr[ETH_ALEN];  /*      The device address should be the mac address of this device. */
 240        u8                              interface_addr[ETH_ALEN];
 241        u8                              social_chan[4];
 242        u8                              listen_channel;
 243        u8                              operating_channel;
 244        u8                              listen_dwell;           /*      This value should be between 1 and 3 */
 245        u8                              support_rate[8];
 246        u8                              p2p_wildcard_ssid[P2P_WILDCARD_SSID_LEN];
 247        u8                              intent;         /*      should only include the intent value. */
 248        u8                              p2p_peer_interface_addr[ ETH_ALEN ];
 249        u8                              p2p_peer_device_addr[ ETH_ALEN ];
 250        u8                              peer_intent;    /*      Included the intent value and tie breaker value. */
 251        u8                              device_name[ WPS_MAX_DEVICE_NAME_LEN ]; /*      Device name for displaying on searching device screen */
 252        u8                              device_name_len;
 253        u8                              profileindex;   /*      Used to point to the index of profileinfo array */
 254        u8                              peer_operating_ch;
 255        u8                              find_phase_state_exchange_cnt;
 256        u16                                     device_password_id_for_nego;    /*      The device password ID for group negotation */
 257        u8                              negotiation_dialog_token;
 258        u8                              nego_ssid[ WLAN_SSID_MAXLEN ];  /*      SSID information for group negotitation */
 259        u8                              nego_ssidlen;
 260        u8                              p2p_group_ssid[WLAN_SSID_MAXLEN];
 261        u8                              p2p_group_ssid_len;
 262        u8                              persistent_supported;           /*      Flag to know the persistent function should be supported or not. */
 263                                                                                                                /*      In the Sigma test, the Sigma will provide this enable from the sta_set_p2p CAPI. */
 264                                                                                                                /*      0: disable */
 265                                                                                                                /*      1: enable */
 266        u8                              session_available;                      /*      Flag to set the WFD session available to enable or disable "by Sigma" */
 267                                                                                                                /*      In the Sigma test, the Sigma will disable the session available by using the sta_preset CAPI. */
 268                                                                                                                /*      0: disable */
 269                                                                                                                /*      1: enable */
 270
 271        u8                              wfd_tdls_enable;                        /*      Flag to enable or disable the TDLS by WFD Sigma */
 272                                                                                                                /*      0: disable */
 273                                                                                                                /*      1: enable */
 274        u8                              wfd_tdls_weaksec;                       /*      Flag to enable or disable the weak security function for TDLS by WFD Sigma */
 275                                                                                                                /*      0: disable */
 276                                                                                                                /*      In this case, the driver can't issue the tdsl setup request frame. */
 277                                                                                                                /*      1: enable */
 278                                                                                                                /*      In this case, the driver can issue the tdls setup request frame */
 279                                                                                                                /*      even the current security is weak security. */
 280
 281        enum    P2P_WPSINFO             ui_got_wps_info;                        /*      This field will store the WPS value (PIN value or PBC) that UI had got from the user. */
 282        u16                                     supported_wps_cm;                       /*      This field describes the WPS config method which this driver supported. */
 283                                                                                                                /*      The value should be the combination of config method defined in page104 of WPS v2.0 spec. */
 284        u8                              external_uuid;                          /*  UUID flag */
 285        u8                              uuid[16];                                       /*  UUID */
 286        uint                                            channel_list_attr_len;          /*      This field will contain the length of body of P2P Channel List attribute of group negotitation response frame. */
 287        u8                              channel_list_attr[100];         /*      This field will contain the body of P2P Channel List attribute of group negotitation response frame. */
 288                                                                                                                /*      We will use the channel_cnt and channel_list fields when constructing the group negotitation confirm frame. */
 289        u8                              driver_interface;                       /*      Indicate DRIVER_WEXT or DRIVER_CFG80211 */
 290};
 291
 292struct tdls_ss_record{  /* signal strength record */
 293        u8 macaddr[ETH_ALEN];
 294        u8 rx_pwd_ba11;
 295        u8 is_tdls_sta; /*  true: direct link sta, false: else */
 296};
 297
 298struct tdls_info{
 299        u8                      ap_prohibited;
 300        u8                      link_established;
 301        u8                      sta_cnt;
 302        u8                      sta_maximum;    /*  1:tdls sta is equal (NUM_STA-1), reach max direct link number; 0: else; */
 303        struct tdls_ss_record   ss_record;
 304        u8                      ch_sensing;
 305        u8                      cur_channel;
 306        u8                      candidate_ch;
 307        u8                      collect_pkt_num[MAX_CHANNEL_NUM];
 308        _lock                           cmd_lock;
 309        _lock                           hdl_lock;
 310        u8                      watchdog_count;
 311        u8                      dev_discovered;         /* WFD_TDLS: for sigma test */
 312        u8                      tdls_enable;
 313        u8                      external_setup; /*  true: setup is handled by wpa_supplicant */
 314};
 315
 316struct tdls_txmgmt {
 317        u8 peer[ETH_ALEN];
 318        u8 action_code;
 319        u8 dialog_token;
 320        u16 status_code;
 321        u8 *buf;
 322        size_t len;
 323        u8 external_support;
 324};
 325
 326/* used for mlme_priv.roam_flags */
 327enum {
 328        RTW_ROAM_ON_EXPIRED = BIT0,
 329        RTW_ROAM_ON_RESUME = BIT1,
 330        RTW_ROAM_ACTIVE = BIT2,
 331};
 332
 333struct mlme_priv {
 334
 335        _lock   lock;
 336        sint    fw_state;       /* shall we protect this variable? maybe not necessarily... */
 337        u8 bScanInProcess;
 338        u8 to_join; /* flag */
 339
 340        u8 to_roam; /* roaming trying times */
 341        struct wlan_network *roam_network; /* the target of active roam */
 342        u8 roam_flags;
 343        u8 roam_rssi_diff_th; /* rssi difference threshold for active scan candidate selection */
 344        u32 roam_scan_int_ms; /* scan interval for active roam */
 345        u32 roam_scanr_exp_ms; /* scan result expire time in ms  for roam */
 346        u8 roam_tgt_addr[ETH_ALEN]; /* request to roam to speicific target without other consideration */
 347
 348        u8 *nic_hdl;
 349
 350        u8 not_indic_disco;
 351        struct list_head                *pscanned;
 352        struct __queue  free_bss_pool;
 353        struct __queue  scanned_queue;
 354        u8 *free_bss_buf;
 355        u32 num_of_scanned;
 356
 357        struct ndis_802_11_ssid assoc_ssid;
 358        u8 assoc_bssid[6];
 359
 360        struct wlan_network     cur_network;
 361        struct wlan_network *cur_network_scanned;
 362
 363        /* uint wireless_mode; no used, remove it */
 364
 365        u32 auto_scan_int_ms;
 366
 367        _timer assoc_timer;
 368
 369        uint assoc_by_bssid;
 370        uint assoc_by_rssi;
 371
 372        _timer scan_to_timer; /*  driver itself handles scan_timeout status. */
 373        unsigned long scan_start_time; /*  used to evaluate the time spent in scanning */
 374
 375        _timer set_scan_deny_timer;
 376        atomic_t set_scan_deny; /* 0: allowed, 1: deny */
 377
 378        struct qos_priv qospriv;
 379
 380        /* Number of non-HT AP/stations */
 381        int num_sta_no_ht;
 382
 383        /* Number of HT AP/stations 20 MHz */
 384        /* int num_sta_ht_20mhz; */
 385
 386
 387        int num_FortyMHzIntolerant;
 388
 389        struct ht_priv htpriv;
 390
 391        RT_LINK_DETECT_T        LinkDetectInfo;
 392        _timer  dynamic_chk_timer; /* dynamic/periodic check timer */
 393
 394        u8 acm_mask; /*  for wmm acm mask */
 395        u8 ChannelPlan;
 396        RT_SCAN_TYPE    scan_mode; /*  active: 1, passive: 0 */
 397
 398        u8 *wps_probe_req_ie;
 399        u32 wps_probe_req_ie_len;
 400
 401        /* Number of associated Non-ERP stations (i.e., stations using 802.11b
 402         * in 802.11g BSS) */
 403        int num_sta_non_erp;
 404
 405        /* Number of associated stations that do not support Short Slot Time */
 406        int num_sta_no_short_slot_time;
 407
 408        /* Number of associated stations that do not support Short Preamble */
 409        int num_sta_no_short_preamble;
 410
 411        int olbc; /* Overlapping Legacy BSS Condition */
 412
 413        /* Number of HT associated stations that do not support greenfield */
 414        int num_sta_ht_no_gf;
 415
 416        /* Number of associated non-HT stations */
 417        /* int num_sta_no_ht; */
 418
 419        /* Number of HT associated stations 20 MHz */
 420        int num_sta_ht_20mhz;
 421
 422        /* Overlapping BSS information */
 423        int olbc_ht;
 424
 425        u16 ht_op_mode;
 426
 427        u8 *assoc_req;
 428        u32 assoc_req_len;
 429        u8 *assoc_rsp;
 430        u32 assoc_rsp_len;
 431
 432        u8 *wps_beacon_ie;
 433        /* u8 *wps_probe_req_ie; */
 434        u8 *wps_probe_resp_ie;
 435        u8 *wps_assoc_resp_ie; /*  for CONFIG_IOCTL_CFG80211, this IE could include p2p ie / wfd ie */
 436
 437        u32 wps_beacon_ie_len;
 438        /* u32 wps_probe_req_ie_len; */
 439        u32 wps_probe_resp_ie_len;
 440        u32 wps_assoc_resp_ie_len; /*  for CONFIG_IOCTL_CFG80211, this IE len could include p2p ie / wfd ie */
 441
 442        u8 *p2p_beacon_ie;
 443        u8 *p2p_probe_req_ie;
 444        u8 *p2p_probe_resp_ie;
 445        u8 *p2p_go_probe_resp_ie; /* for GO */
 446        u8 *p2p_assoc_req_ie;
 447
 448        u32 p2p_beacon_ie_len;
 449        u32 p2p_probe_req_ie_len;
 450        u32 p2p_probe_resp_ie_len;
 451        u32 p2p_go_probe_resp_ie_len; /* for GO */
 452        u32 p2p_assoc_req_ie_len;
 453
 454        _lock   bcn_update_lock;
 455        u8 update_bcn;
 456
 457#ifdef CONFIG_INTEL_WIDI
 458        int     widi_state;
 459        int     listen_state;
 460        _timer  listen_timer;
 461        atomic_t        rx_probe_rsp; /*  1:receive probe respone from RDS source. */
 462        u8 *l2sdTaBuffer;
 463        u8 channel_idx;
 464        u8 group_cnt;   /* In WiDi 3.5, they specified another scan algo. for WFD/RDS co-existed */
 465        u8 sa_ext[L2SDTA_SERVICE_VE_LEN];
 466
 467        u8 widi_enable;
 468        /**
 469         * For WiDi 4; upper layer would set
 470         * p2p_primary_device_type_category_id
 471         * p2p_primary_device_type_sub_category_id
 472         * p2p_secondary_device_type_category_id
 473         * p2p_secondary_device_type_sub_category_id
 474         */
 475        u16 p2p_pdt_cid;
 476        u16 p2p_pdt_scid;
 477        u8 num_p2p_sdt;
 478        u16 p2p_sdt_cid[MAX_NUM_P2P_SDT];
 479        u16 p2p_sdt_scid[MAX_NUM_P2P_SDT];
 480        u8 p2p_reject_disable;  /* When starting NL80211 wpa_supplicant/hostapd, it will call netdev_close */
 481                                                        /* such that it will cause p2p disabled. Use this flag to reject. */
 482#endif /*  CONFIG_INTEL_WIDI */
 483
 484        u8 NumOfBcnInfoChkFail;
 485        unsigned long   timeBcnInfoChkStart;
 486};
 487
 488#define rtw_mlme_set_auto_scan_int(adapter, ms) \
 489        do { \
 490                adapter->mlmepriv.auto_scan_int_ms = ms; \
 491        while (0)
 492
 493void rtw_mlme_reset_auto_scan_int(struct adapter *adapter);
 494
 495struct hostapd_priv
 496{
 497        struct adapter *padapter;
 498};
 499
 500extern int hostapd_mode_init(struct adapter *padapter);
 501extern void hostapd_mode_unload(struct adapter *padapter);
 502
 503extern void rtw_joinbss_event_prehandle(struct adapter *adapter, u8 *pbuf);
 504extern void rtw_survey_event_callback(struct adapter *adapter, u8 *pbuf);
 505extern void rtw_surveydone_event_callback(struct adapter *adapter, u8 *pbuf);
 506extern void rtw_joinbss_event_callback(struct adapter *adapter, u8 *pbuf);
 507extern void rtw_stassoc_event_callback(struct adapter *adapter, u8 *pbuf);
 508extern void rtw_stadel_event_callback(struct adapter *adapter, u8 *pbuf);
 509extern void rtw_atimdone_event_callback(struct adapter *adapter, u8 *pbuf);
 510extern void rtw_cpwm_event_callback(struct adapter *adapter, u8 *pbuf);
 511extern void rtw_wmm_event_callback(struct adapter *padapter, u8 *pbuf);
 512
 513extern void rtw_join_timeout_handler(struct timer_list *t);
 514extern void _rtw_scan_timeout_handler(struct timer_list *t);
 515
 516int event_thread(void *context);
 517
 518extern void rtw_free_network_queue(struct adapter *adapter, u8 isfreeall);
 519extern int rtw_init_mlme_priv(struct adapter *adapter);/*  (struct mlme_priv *pmlmepriv); */
 520
 521extern void rtw_free_mlme_priv (struct mlme_priv *pmlmepriv);
 522
 523
 524extern sint rtw_select_and_join_from_scanned_queue(struct mlme_priv *pmlmepriv);
 525extern sint rtw_set_key(struct adapter *adapter, struct security_priv *psecuritypriv, sint keyid, u8 set_tx, bool enqueue);
 526extern sint rtw_set_auth(struct adapter *adapter, struct security_priv *psecuritypriv);
 527
 528__inline static u8 *get_bssid(struct mlme_priv *pmlmepriv)
 529{       /* if sta_mode:pmlmepriv->cur_network.network.MacAddress => bssid */
 530        /*  if adhoc_mode:pmlmepriv->cur_network.network.MacAddress => ibss mac address */
 531        return pmlmepriv->cur_network.network.MacAddress;
 532}
 533
 534__inline static sint check_fwstate(struct mlme_priv *pmlmepriv, sint state)
 535{
 536        if (pmlmepriv->fw_state & state)
 537                return true;
 538
 539        return false;
 540}
 541
 542__inline static sint get_fwstate(struct mlme_priv *pmlmepriv)
 543{
 544        return pmlmepriv->fw_state;
 545}
 546
 547/*
 548 * No Limit on the calling context,
 549 * therefore set it to be the critical section...
 550 *
 551 * ### NOTE:#### (!!!!)
 552 * MUST TAKE CARE THAT BEFORE CALLING THIS FUNC, YOU SHOULD HAVE LOCKED pmlmepriv->lock
 553 */
 554__inline static void set_fwstate(struct mlme_priv *pmlmepriv, sint state)
 555{
 556        pmlmepriv->fw_state |= state;
 557        /* FOR HW integration */
 558        if (_FW_UNDER_SURVEY ==state) {
 559                pmlmepriv->bScanInProcess = true;
 560        }
 561}
 562
 563__inline static void _clr_fwstate_(struct mlme_priv *pmlmepriv, sint state)
 564{
 565        pmlmepriv->fw_state &= ~state;
 566        /* FOR HW integration */
 567        if (_FW_UNDER_SURVEY ==state) {
 568                pmlmepriv->bScanInProcess = false;
 569        }
 570}
 571
 572/*
 573 * No Limit on the calling context,
 574 * therefore set it to be the critical section...
 575 */
 576__inline static void clr_fwstate(struct mlme_priv *pmlmepriv, sint state)
 577{
 578        spin_lock_bh(&pmlmepriv->lock);
 579        if (check_fwstate(pmlmepriv, state) == true)
 580                pmlmepriv->fw_state ^= state;
 581        spin_unlock_bh(&pmlmepriv->lock);
 582}
 583
 584__inline static void set_scanned_network_val(struct mlme_priv *pmlmepriv, sint val)
 585{
 586        spin_lock_bh(&pmlmepriv->lock);
 587        pmlmepriv->num_of_scanned = val;
 588        spin_unlock_bh(&pmlmepriv->lock);
 589}
 590
 591extern u16 rtw_get_capability(struct wlan_bssid_ex *bss);
 592extern void rtw_update_scanned_network(struct adapter *adapter, struct wlan_bssid_ex *target);
 593extern void rtw_disconnect_hdl_under_linked(struct adapter * adapter, struct sta_info *psta, u8 free_assoc);
 594extern void rtw_generate_random_ibss(u8 *pibss);
 595extern struct wlan_network* rtw_find_network(struct __queue *scanned_queue, u8 *addr);
 596extern struct wlan_network* rtw_get_oldest_wlan_network(struct __queue *scanned_queue);
 597struct wlan_network *_rtw_find_same_network(struct __queue *scanned_queue, struct wlan_network *network);
 598
 599extern void rtw_free_assoc_resources(struct adapter * adapter, int lock_scanned_queue);
 600extern void rtw_indicate_disconnect(struct adapter * adapter);
 601extern void rtw_indicate_connect(struct adapter * adapter);
 602void rtw_indicate_scan_done(struct adapter *padapter, bool aborted);
 603void rtw_scan_abort(struct adapter *adapter);
 604
 605extern int rtw_restruct_sec_ie(struct adapter *adapter, u8 *in_ie, u8 *out_ie, uint in_len);
 606extern int rtw_restruct_wmm_ie(struct adapter *adapter, u8 *in_ie, u8 *out_ie, uint in_len, uint initial_out_len);
 607extern void rtw_init_registrypriv_dev_network(struct adapter *adapter);
 608
 609extern void rtw_update_registrypriv_dev_network(struct adapter *adapter);
 610
 611extern void rtw_get_encrypt_decrypt_from_registrypriv(struct adapter *adapter);
 612
 613extern void _rtw_join_timeout_handler(struct timer_list *t);
 614extern void rtw_scan_timeout_handler(struct timer_list *t);
 615
 616extern void rtw_dynamic_check_timer_handler(struct adapter *adapter);
 617bool rtw_is_scan_deny(struct adapter *adapter);
 618void rtw_clear_scan_deny(struct adapter *adapter);
 619void rtw_set_scan_deny_timer_hdl(struct adapter *adapter);
 620void rtw_set_scan_deny(struct adapter *adapter, u32 ms);
 621
 622extern int _rtw_init_mlme_priv(struct adapter *padapter);
 623
 624void rtw_free_mlme_priv_ie_data(struct mlme_priv *pmlmepriv);
 625
 626extern void _rtw_free_mlme_priv(struct mlme_priv *pmlmepriv);
 627
 628/* extern struct wlan_network* _rtw_dequeue_network(struct __queue *queue); */
 629
 630extern struct wlan_network* _rtw_alloc_network(struct mlme_priv *pmlmepriv);
 631
 632
 633extern void _rtw_free_network(struct mlme_priv *pmlmepriv, struct wlan_network *pnetwork, u8 isfreeall);
 634extern void _rtw_free_network_nolock(struct mlme_priv *pmlmepriv, struct wlan_network *pnetwork);
 635
 636
 637extern struct wlan_network* _rtw_find_network(struct __queue *scanned_queue, u8 *addr);
 638
 639extern void _rtw_free_network_queue(struct adapter *padapter, u8 isfreeall);
 640
 641extern sint rtw_if_up(struct adapter *padapter);
 642
 643sint rtw_linked_check(struct adapter *padapter);
 644
 645u8 *rtw_get_capability_from_ie(u8 *ie);
 646u8 *rtw_get_beacon_interval_from_ie(u8 *ie);
 647
 648
 649void rtw_joinbss_reset(struct adapter *padapter);
 650
 651void rtw_ht_use_default_setting(struct adapter *padapter);
 652void rtw_build_wmm_ie_ht(struct adapter *padapter, u8 *out_ie, uint *pout_len);
 653unsigned int rtw_restructure_ht_ie(struct adapter *padapter, u8 *in_ie, u8 *out_ie, uint in_len, uint *pout_len, u8 channel);
 654void rtw_update_ht_cap(struct adapter *padapter, u8 *pie, uint ie_len, u8 channel);
 655void rtw_issue_addbareq_cmd(struct adapter *padapter, struct xmit_frame *pxmitframe);
 656void rtw_append_exented_cap(struct adapter *padapter, u8 *out_ie, uint *pout_len);
 657
 658int rtw_is_same_ibss(struct adapter *adapter, struct wlan_network *pnetwork);
 659int is_same_network(struct wlan_bssid_ex *src, struct wlan_bssid_ex *dst, u8 feature);
 660
 661#define rtw_roam_flags(adapter) ((adapter)->mlmepriv.roam_flags)
 662#define rtw_chk_roam_flags(adapter, flags) ((adapter)->mlmepriv.roam_flags & flags)
 663#define rtw_clr_roam_flags(adapter, flags) \
 664        do { \
 665                ((adapter)->mlmepriv.roam_flags &= ~flags); \
 666        } while (0)
 667
 668#define rtw_set_roam_flags(adapter, flags) \
 669        do { \
 670                ((adapter)->mlmepriv.roam_flags |= flags); \
 671        } while (0)
 672
 673#define rtw_assign_roam_flags(adapter, flags) \
 674        do { \
 675                ((adapter)->mlmepriv.roam_flags = flags); \
 676        } while (0)
 677
 678void _rtw_roaming(struct adapter *adapter, struct wlan_network *tgt_network);
 679void rtw_roaming(struct adapter *adapter, struct wlan_network *tgt_network);
 680void rtw_set_to_roam(struct adapter *adapter, u8 to_roam);
 681u8 rtw_dec_to_roam(struct adapter *adapter);
 682u8 rtw_to_roam(struct adapter *adapter);
 683int rtw_select_roaming_candidate(struct mlme_priv *pmlmepriv);
 684
 685void rtw_sta_media_status_rpt(struct adapter *adapter, struct sta_info *psta, u32 mstatus);
 686
 687#endif /* __RTL871X_MLME_H_ */
 688
Hosted by Missing Link Electronics. The original LXR software by the LXR community, this experimental version by lxr@linux.no.