linux/drivers/tty/moxa.c
<<
>>
Prefs
   1// SPDX-License-Identifier: GPL-2.0+
   2/*****************************************************************************/
   3/*
   4 *           moxa.c  -- MOXA Intellio family multiport serial driver.
   5 *
   6 *      Copyright (C) 1999-2000  Moxa Technologies (support@moxa.com).
   7 *      Copyright (c) 2007 Jiri Slaby <jirislaby@gmail.com>
   8 *
   9 *      This code is loosely based on the Linux serial driver, written by
  10 *      Linus Torvalds, Theodore T'so and others.
  11 */
  12
  13/*
  14 *    MOXA Intellio Series Driver
  15 *      for             : LINUX
  16 *      date            : 1999/1/7
  17 *      version         : 5.1
  18 */
  19
  20#include <linux/module.h>
  21#include <linux/types.h>
  22#include <linux/mm.h>
  23#include <linux/ioport.h>
  24#include <linux/errno.h>
  25#include <linux/firmware.h>
  26#include <linux/signal.h>
  27#include <linux/sched.h>
  28#include <linux/timer.h>
  29#include <linux/interrupt.h>
  30#include <linux/tty.h>
  31#include <linux/tty_flip.h>
  32#include <linux/major.h>
  33#include <linux/string.h>
  34#include <linux/fcntl.h>
  35#include <linux/ptrace.h>
  36#include <linux/serial.h>
  37#include <linux/tty_driver.h>
  38#include <linux/delay.h>
  39#include <linux/pci.h>
  40#include <linux/init.h>
  41#include <linux/bitops.h>
  42#include <linux/slab.h>
  43#include <linux/ratelimit.h>
  44
  45#include <asm/io.h>
  46#include <linux/uaccess.h>
  47
  48#include "moxa.h"
  49
  50#define MOXA_VERSION            "6.0k"
  51
  52#define MOXA_FW_HDRLEN          32
  53
  54#define MOXAMAJOR               172
  55
  56#define MAX_BOARDS              4       /* Don't change this value */
  57#define MAX_PORTS_PER_BOARD     32      /* Don't change this value */
  58#define MAX_PORTS               (MAX_BOARDS * MAX_PORTS_PER_BOARD)
  59
  60#define MOXA_IS_320(brd) ((brd)->boardType == MOXA_BOARD_C320_ISA || \
  61                (brd)->boardType == MOXA_BOARD_C320_PCI)
  62
  63/*
  64 *    Define the Moxa PCI vendor and device IDs.
  65 */
  66#define MOXA_BUS_TYPE_ISA       0
  67#define MOXA_BUS_TYPE_PCI       1
  68
  69enum {
  70        MOXA_BOARD_C218_PCI = 1,
  71        MOXA_BOARD_C218_ISA,
  72        MOXA_BOARD_C320_PCI,
  73        MOXA_BOARD_C320_ISA,
  74        MOXA_BOARD_CP204J,
  75};
  76
  77static char *moxa_brdname[] =
  78{
  79        "C218 Turbo PCI series",
  80        "C218 Turbo ISA series",
  81        "C320 Turbo PCI series",
  82        "C320 Turbo ISA series",
  83        "CP-204J series",
  84};
  85
  86#ifdef CONFIG_PCI
  87static const struct pci_device_id moxa_pcibrds[] = {
  88        { PCI_DEVICE(PCI_VENDOR_ID_MOXA, PCI_DEVICE_ID_MOXA_C218),
  89                .driver_data = MOXA_BOARD_C218_PCI },
  90        { PCI_DEVICE(PCI_VENDOR_ID_MOXA, PCI_DEVICE_ID_MOXA_C320),
  91                .driver_data = MOXA_BOARD_C320_PCI },
  92        { PCI_DEVICE(PCI_VENDOR_ID_MOXA, PCI_DEVICE_ID_MOXA_CP204J),
  93                .driver_data = MOXA_BOARD_CP204J },
  94        { 0 }
  95};
  96MODULE_DEVICE_TABLE(pci, moxa_pcibrds);
  97#endif /* CONFIG_PCI */
  98
  99struct moxa_port;
 100
 101static struct moxa_board_conf {
 102        int boardType;
 103        int numPorts;
 104        int busType;
 105
 106        unsigned int ready;
 107
 108        struct moxa_port *ports;
 109
 110        void __iomem *basemem;
 111        void __iomem *intNdx;
 112        void __iomem *intPend;
 113        void __iomem *intTable;
 114} moxa_boards[MAX_BOARDS];
 115
 116struct mxser_mstatus {
 117        tcflag_t cflag;
 118        int cts;
 119        int dsr;
 120        int ri;
 121        int dcd;
 122};
 123
 124struct moxaq_str {
 125        int inq;
 126        int outq;
 127};
 128
 129struct moxa_port {
 130        struct tty_port port;
 131        struct moxa_board_conf *board;
 132        void __iomem *tableAddr;
 133
 134        int type;
 135        int cflag;
 136        unsigned long statusflags;
 137
 138        u8 DCDState;            /* Protected by the port lock */
 139        u8 lineCtrl;
 140        u8 lowChkFlag;
 141};
 142
 143struct mon_str {
 144        int tick;
 145        int rxcnt[MAX_PORTS];
 146        int txcnt[MAX_PORTS];
 147};
 148
 149/* statusflags */
 150#define TXSTOPPED       1
 151#define LOWWAIT         2
 152#define EMPTYWAIT       3
 153
 154
 155#define WAKEUP_CHARS            256
 156
 157static int ttymajor = MOXAMAJOR;
 158static struct mon_str moxaLog;
 159static unsigned int moxaFuncTout = HZ / 2;
 160static unsigned int moxaLowWaterChk;
 161static DEFINE_MUTEX(moxa_openlock);
 162static DEFINE_SPINLOCK(moxa_lock);
 163
 164static unsigned long baseaddr[MAX_BOARDS];
 165static unsigned int type[MAX_BOARDS];
 166static unsigned int numports[MAX_BOARDS];
 167static struct tty_port moxa_service_port;
 168
 169MODULE_AUTHOR("William Chen");
 170MODULE_DESCRIPTION("MOXA Intellio Family Multiport Board Device Driver");
 171MODULE_LICENSE("GPL");
 172MODULE_FIRMWARE("c218tunx.cod");
 173MODULE_FIRMWARE("cp204unx.cod");
 174MODULE_FIRMWARE("c320tunx.cod");
 175
 176module_param_array(type, uint, NULL, 0);
 177MODULE_PARM_DESC(type, "card type: C218=2, C320=4");
 178module_param_hw_array(baseaddr, ulong, ioport, NULL, 0);
 179MODULE_PARM_DESC(baseaddr, "base address");
 180module_param_array(numports, uint, NULL, 0);
 181MODULE_PARM_DESC(numports, "numports (ignored for C218)");
 182
 183module_param(ttymajor, int, 0);
 184
 185/*
 186 * static functions:
 187 */
 188static int moxa_open(struct tty_struct *, struct file *);
 189static void moxa_close(struct tty_struct *, struct file *);
 190static int moxa_write(struct tty_struct *, const unsigned char *, int);
 191static int moxa_write_room(struct tty_struct *);
 192static void moxa_flush_buffer(struct tty_struct *);
 193static int moxa_chars_in_buffer(struct tty_struct *);
 194static void moxa_set_termios(struct tty_struct *, struct ktermios *);
 195static void moxa_stop(struct tty_struct *);
 196static void moxa_start(struct tty_struct *);
 197static void moxa_hangup(struct tty_struct *);
 198static int moxa_tiocmget(struct tty_struct *tty);
 199static int moxa_tiocmset(struct tty_struct *tty,
 200                         unsigned int set, unsigned int clear);
 201static void moxa_poll(struct timer_list *);
 202static void moxa_set_tty_param(struct tty_struct *, struct ktermios *);
 203static void moxa_shutdown(struct tty_port *);
 204static int moxa_carrier_raised(struct tty_port *);
 205static void moxa_dtr_rts(struct tty_port *, int);
 206/*
 207 * moxa board interface functions:
 208 */
 209static void MoxaPortEnable(struct moxa_port *);
 210static void MoxaPortDisable(struct moxa_port *);
 211static int MoxaPortSetTermio(struct moxa_port *, struct ktermios *, speed_t);
 212static int MoxaPortGetLineOut(struct moxa_port *, int *, int *);
 213static void MoxaPortLineCtrl(struct moxa_port *, int, int);
 214static void MoxaPortFlowCtrl(struct moxa_port *, int, int, int, int, int);
 215static int MoxaPortLineStatus(struct moxa_port *);
 216static void MoxaPortFlushData(struct moxa_port *, int);
 217static int MoxaPortWriteData(struct tty_struct *, const unsigned char *, int);
 218static int MoxaPortReadData(struct moxa_port *);
 219static int MoxaPortTxQueue(struct moxa_port *);
 220static int MoxaPortRxQueue(struct moxa_port *);
 221static int MoxaPortTxFree(struct moxa_port *);
 222static void MoxaPortTxDisable(struct moxa_port *);
 223static void MoxaPortTxEnable(struct moxa_port *);
 224static int moxa_get_serial_info(struct moxa_port *, struct serial_struct __user *);
 225static int moxa_set_serial_info(struct moxa_port *, struct serial_struct __user *);
 226static void MoxaSetFifo(struct moxa_port *port, int enable);
 227
 228/*
 229 * I/O functions
 230 */
 231
 232static DEFINE_SPINLOCK(moxafunc_lock);
 233
 234static void moxa_wait_finish(void __iomem *ofsAddr)
 235{
 236        unsigned long end = jiffies + moxaFuncTout;
 237
 238        while (readw(ofsAddr + FuncCode) != 0)
 239                if (time_after(jiffies, end))
 240                        return;
 241        if (readw(ofsAddr + FuncCode) != 0)
 242                printk_ratelimited(KERN_WARNING "moxa function expired\n");
 243}
 244
 245static void moxafunc(void __iomem *ofsAddr, u16 cmd, u16 arg)
 246{
 247        unsigned long flags;
 248        spin_lock_irqsave(&moxafunc_lock, flags);
 249        writew(arg, ofsAddr + FuncArg);
 250        writew(cmd, ofsAddr + FuncCode);
 251        moxa_wait_finish(ofsAddr);
 252        spin_unlock_irqrestore(&moxafunc_lock, flags);
 253}
 254
 255static int moxafuncret(void __iomem *ofsAddr, u16 cmd, u16 arg)
 256{
 257        unsigned long flags;
 258        u16 ret;
 259        spin_lock_irqsave(&moxafunc_lock, flags);
 260        writew(arg, ofsAddr + FuncArg);
 261        writew(cmd, ofsAddr + FuncCode);
 262        moxa_wait_finish(ofsAddr);
 263        ret = readw(ofsAddr + FuncArg);
 264        spin_unlock_irqrestore(&moxafunc_lock, flags);
 265        return ret;
 266}
 267
 268static void moxa_low_water_check(void __iomem *ofsAddr)
 269{
 270        u16 rptr, wptr, mask, len;
 271
 272        if (readb(ofsAddr + FlagStat) & Xoff_state) {
 273                rptr = readw(ofsAddr + RXrptr);
 274                wptr = readw(ofsAddr + RXwptr);
 275                mask = readw(ofsAddr + RX_mask);
 276                len = (wptr - rptr) & mask;
 277                if (len <= Low_water)
 278                        moxafunc(ofsAddr, FC_SendXon, 0);
 279        }
 280}
 281
 282/*
 283 * TTY operations
 284 */
 285
 286static int moxa_ioctl(struct tty_struct *tty,
 287                      unsigned int cmd, unsigned long arg)
 288{
 289        struct moxa_port *ch = tty->driver_data;
 290        void __user *argp = (void __user *)arg;
 291        int status, ret = 0;
 292
 293        if (tty->index == MAX_PORTS) {
 294                if (cmd != MOXA_GETDATACOUNT && cmd != MOXA_GET_IOQUEUE &&
 295                                cmd != MOXA_GETMSTATUS)
 296                        return -EINVAL;
 297        } else if (!ch)
 298                return -ENODEV;
 299
 300        switch (cmd) {
 301        case MOXA_GETDATACOUNT:
 302                moxaLog.tick = jiffies;
 303                if (copy_to_user(argp, &moxaLog, sizeof(moxaLog)))
 304                        ret = -EFAULT;
 305                break;
 306        case MOXA_FLUSH_QUEUE:
 307                MoxaPortFlushData(ch, arg);
 308                break;
 309        case MOXA_GET_IOQUEUE: {
 310                struct moxaq_str __user *argm = argp;
 311                struct moxaq_str tmp;
 312                struct moxa_port *p;
 313                unsigned int i, j;
 314
 315                for (i = 0; i < MAX_BOARDS; i++) {
 316                        p = moxa_boards[i].ports;
 317                        for (j = 0; j < MAX_PORTS_PER_BOARD; j++, p++, argm++) {
 318                                memset(&tmp, 0, sizeof(tmp));
 319                                spin_lock_bh(&moxa_lock);
 320                                if (moxa_boards[i].ready) {
 321                                        tmp.inq = MoxaPortRxQueue(p);
 322                                        tmp.outq = MoxaPortTxQueue(p);
 323                                }
 324                                spin_unlock_bh(&moxa_lock);
 325                                if (copy_to_user(argm, &tmp, sizeof(tmp)))
 326                                        return -EFAULT;
 327                        }
 328                }
 329                break;
 330        } case MOXA_GET_OQUEUE:
 331                status = MoxaPortTxQueue(ch);
 332                ret = put_user(status, (unsigned long __user *)argp);
 333                break;
 334        case MOXA_GET_IQUEUE:
 335                status = MoxaPortRxQueue(ch);
 336                ret = put_user(status, (unsigned long __user *)argp);
 337                break;
 338        case MOXA_GETMSTATUS: {
 339                struct mxser_mstatus __user *argm = argp;
 340                struct mxser_mstatus tmp;
 341                struct moxa_port *p;
 342                unsigned int i, j;
 343
 344                for (i = 0; i < MAX_BOARDS; i++) {
 345                        p = moxa_boards[i].ports;
 346                        for (j = 0; j < MAX_PORTS_PER_BOARD; j++, p++, argm++) {
 347                                struct tty_struct *ttyp;
 348                                memset(&tmp, 0, sizeof(tmp));
 349                                spin_lock_bh(&moxa_lock);
 350                                if (!moxa_boards[i].ready) {
 351                                        spin_unlock_bh(&moxa_lock);
 352                                        goto copy;
 353                                }
 354
 355                                status = MoxaPortLineStatus(p);
 356                                spin_unlock_bh(&moxa_lock);
 357
 358                                if (status & 1)
 359                                        tmp.cts = 1;
 360                                if (status & 2)
 361                                        tmp.dsr = 1;
 362                                if (status & 4)
 363                                        tmp.dcd = 1;
 364
 365                                ttyp = tty_port_tty_get(&p->port);
 366                                if (!ttyp)
 367                                        tmp.cflag = p->cflag;
 368                                else
 369                                        tmp.cflag = ttyp->termios.c_cflag;
 370                                tty_kref_put(ttyp);
 371copy:
 372                                if (copy_to_user(argm, &tmp, sizeof(tmp)))
 373                                        return -EFAULT;
 374                        }
 375                }
 376                break;
 377        }
 378        case TIOCGSERIAL:
 379                mutex_lock(&ch->port.mutex);
 380                ret = moxa_get_serial_info(ch, argp);
 381                mutex_unlock(&ch->port.mutex);
 382                break;
 383        case TIOCSSERIAL:
 384                mutex_lock(&ch->port.mutex);
 385                ret = moxa_set_serial_info(ch, argp);
 386                mutex_unlock(&ch->port.mutex);
 387                break;
 388        default:
 389                ret = -ENOIOCTLCMD;
 390        }
 391        return ret;
 392}
 393
 394static int moxa_break_ctl(struct tty_struct *tty, int state)
 395{
 396        struct moxa_port *port = tty->driver_data;
 397
 398        moxafunc(port->tableAddr, state ? FC_SendBreak : FC_StopBreak,
 399                        Magic_code);
 400        return 0;
 401}
 402
 403static const struct tty_operations moxa_ops = {
 404        .open = moxa_open,
 405        .close = moxa_close,
 406        .write = moxa_write,
 407        .write_room = moxa_write_room,
 408        .flush_buffer = moxa_flush_buffer,
 409        .chars_in_buffer = moxa_chars_in_buffer,
 410        .ioctl = moxa_ioctl,
 411        .set_termios = moxa_set_termios,
 412        .stop = moxa_stop,
 413        .start = moxa_start,
 414        .hangup = moxa_hangup,
 415        .break_ctl = moxa_break_ctl,
 416        .tiocmget = moxa_tiocmget,
 417        .tiocmset = moxa_tiocmset,
 418};
 419
 420static const struct tty_port_operations moxa_port_ops = {
 421        .carrier_raised = moxa_carrier_raised,
 422        .dtr_rts = moxa_dtr_rts,
 423        .shutdown = moxa_shutdown,
 424};
 425
 426static struct tty_driver *moxaDriver;
 427static DEFINE_TIMER(moxaTimer, moxa_poll);
 428
 429/*
 430 * HW init
 431 */
 432
 433static int moxa_check_fw_model(struct moxa_board_conf *brd, u8 model)
 434{
 435        switch (brd->boardType) {
 436        case MOXA_BOARD_C218_ISA:
 437        case MOXA_BOARD_C218_PCI:
 438                if (model != 1)
 439                        goto err;
 440                break;
 441        case MOXA_BOARD_CP204J:
 442                if (model != 3)
 443                        goto err;
 444                break;
 445        default:
 446                if (model != 2)
 447                        goto err;
 448                break;
 449        }
 450        return 0;
 451err:
 452        return -EINVAL;
 453}
 454
 455static int moxa_check_fw(const void *ptr)
 456{
 457        const __le16 *lptr = ptr;
 458
 459        if (*lptr != cpu_to_le16(0x7980))
 460                return -EINVAL;
 461
 462        return 0;
 463}
 464
 465static int moxa_load_bios(struct moxa_board_conf *brd, const u8 *buf,
 466                size_t len)
 467{
 468        void __iomem *baseAddr = brd->basemem;
 469        u16 tmp;
 470
 471        writeb(HW_reset, baseAddr + Control_reg);       /* reset */
 472        msleep(10);
 473        memset_io(baseAddr, 0, 4096);
 474        memcpy_toio(baseAddr, buf, len);        /* download BIOS */
 475        writeb(0, baseAddr + Control_reg);      /* restart */
 476
 477        msleep(2000);
 478
 479        switch (brd->boardType) {
 480        case MOXA_BOARD_C218_ISA:
 481        case MOXA_BOARD_C218_PCI:
 482                tmp = readw(baseAddr + C218_key);
 483                if (tmp != C218_KeyCode)
 484                        goto err;
 485                break;
 486        case MOXA_BOARD_CP204J:
 487                tmp = readw(baseAddr + C218_key);
 488                if (tmp != CP204J_KeyCode)
 489                        goto err;
 490                break;
 491        default:
 492                tmp = readw(baseAddr + C320_key);
 493                if (tmp != C320_KeyCode)
 494                        goto err;
 495                tmp = readw(baseAddr + C320_status);
 496                if (tmp != STS_init) {
 497                        printk(KERN_ERR "MOXA: bios upload failed -- CPU/Basic "
 498                                        "module not found\n");
 499                        return -EIO;
 500                }
 501                break;
 502        }
 503
 504        return 0;
 505err:
 506        printk(KERN_ERR "MOXA: bios upload failed -- board not found\n");
 507        return -EIO;
 508}
 509
 510static int moxa_load_320b(struct moxa_board_conf *brd, const u8 *ptr,
 511                size_t len)
 512{
 513        void __iomem *baseAddr = brd->basemem;
 514
 515        if (len < 7168) {
 516                printk(KERN_ERR "MOXA: invalid 320 bios -- too short\n");
 517                return -EINVAL;
 518        }
 519
 520        writew(len - 7168 - 2, baseAddr + C320bapi_len);
 521        writeb(1, baseAddr + Control_reg);      /* Select Page 1 */
 522        memcpy_toio(baseAddr + DynPage_addr, ptr, 7168);
 523        writeb(2, baseAddr + Control_reg);      /* Select Page 2 */
 524        memcpy_toio(baseAddr + DynPage_addr, ptr + 7168, len - 7168);
 525
 526        return 0;
 527}
 528
 529static int moxa_real_load_code(struct moxa_board_conf *brd, const void *ptr,
 530                size_t len)
 531{
 532        void __iomem *baseAddr = brd->basemem;
 533        const __le16 *uptr = ptr;
 534        size_t wlen, len2, j;
 535        unsigned long key, loadbuf, loadlen, checksum, checksum_ok;
 536        unsigned int i, retry;
 537        u16 usum, keycode;
 538
 539        keycode = (brd->boardType == MOXA_BOARD_CP204J) ? CP204J_KeyCode :
 540                                C218_KeyCode;
 541
 542        switch (brd->boardType) {
 543        case MOXA_BOARD_CP204J:
 544        case MOXA_BOARD_C218_ISA:
 545        case MOXA_BOARD_C218_PCI:
 546                key = C218_key;
 547                loadbuf = C218_LoadBuf;
 548                loadlen = C218DLoad_len;
 549                checksum = C218check_sum;
 550                checksum_ok = C218chksum_ok;
 551                break;
 552        default:
 553                key = C320_key;
 554                keycode = C320_KeyCode;
 555                loadbuf = C320_LoadBuf;
 556                loadlen = C320DLoad_len;
 557                checksum = C320check_sum;
 558                checksum_ok = C320chksum_ok;
 559                break;
 560        }
 561
 562        usum = 0;
 563        wlen = len >> 1;
 564        for (i = 0; i < wlen; i++)
 565                usum += le16_to_cpu(uptr[i]);
 566        retry = 0;
 567        do {
 568                wlen = len >> 1;
 569                j = 0;
 570                while (wlen) {
 571                        len2 = (wlen > 2048) ? 2048 : wlen;
 572                        wlen -= len2;
 573                        memcpy_toio(baseAddr + loadbuf, ptr + j, len2 << 1);
 574                        j += len2 << 1;
 575
 576                        writew(len2, baseAddr + loadlen);
 577                        writew(0, baseAddr + key);
 578                        for (i = 0; i < 100; i++) {
 579                                if (readw(baseAddr + key) == keycode)
 580                                        break;
 581                                msleep(10);
 582                        }
 583                        if (readw(baseAddr + key) != keycode)
 584                                return -EIO;
 585                }
 586                writew(0, baseAddr + loadlen);
 587                writew(usum, baseAddr + checksum);
 588                writew(0, baseAddr + key);
 589                for (i = 0; i < 100; i++) {
 590                        if (readw(baseAddr + key) == keycode)
 591                                break;
 592                        msleep(10);
 593                }
 594                retry++;
 595        } while ((readb(baseAddr + checksum_ok) != 1) && (retry < 3));
 596        if (readb(baseAddr + checksum_ok) != 1)
 597                return -EIO;
 598
 599        writew(0, baseAddr + key);
 600        for (i = 0; i < 600; i++) {
 601                if (readw(baseAddr + Magic_no) == Magic_code)
 602                        break;
 603                msleep(10);
 604        }
 605        if (readw(baseAddr + Magic_no) != Magic_code)
 606                return -EIO;
 607
 608        if (MOXA_IS_320(brd)) {
 609                if (brd->busType == MOXA_BUS_TYPE_PCI) {        /* ASIC board */
 610                        writew(0x3800, baseAddr + TMS320_PORT1);
 611                        writew(0x3900, baseAddr + TMS320_PORT2);
 612                        writew(28499, baseAddr + TMS320_CLOCK);
 613                } else {
 614                        writew(0x3200, baseAddr + TMS320_PORT1);
 615                        writew(0x3400, baseAddr + TMS320_PORT2);
 616                        writew(19999, baseAddr + TMS320_CLOCK);
 617                }
 618        }
 619        writew(1, baseAddr + Disable_IRQ);
 620        writew(0, baseAddr + Magic_no);
 621        for (i = 0; i < 500; i++) {
 622                if (readw(baseAddr + Magic_no) == Magic_code)
 623                        break;
 624                msleep(10);
 625        }
 626        if (readw(baseAddr + Magic_no) != Magic_code)
 627                return -EIO;
 628
 629        if (MOXA_IS_320(brd)) {
 630                j = readw(baseAddr + Module_cnt);
 631                if (j <= 0)
 632                        return -EIO;
 633                brd->numPorts = j * 8;
 634                writew(j, baseAddr + Module_no);
 635                writew(0, baseAddr + Magic_no);
 636                for (i = 0; i < 600; i++) {
 637                        if (readw(baseAddr + Magic_no) == Magic_code)
 638                                break;
 639                        msleep(10);
 640                }
 641                if (readw(baseAddr + Magic_no) != Magic_code)
 642                        return -EIO;
 643        }
 644        brd->intNdx = baseAddr + IRQindex;
 645        brd->intPend = baseAddr + IRQpending;
 646        brd->intTable = baseAddr + IRQtable;
 647
 648        return 0;
 649}
 650
 651static int moxa_load_code(struct moxa_board_conf *brd, const void *ptr,
 652                size_t len)
 653{
 654        void __iomem *ofsAddr, *baseAddr = brd->basemem;
 655        struct moxa_port *port;
 656        int retval, i;
 657
 658        if (len % 2) {
 659                printk(KERN_ERR "MOXA: bios length is not even\n");
 660                return -EINVAL;
 661        }
 662
 663        retval = moxa_real_load_code(brd, ptr, len); /* may change numPorts */
 664        if (retval)
 665                return retval;
 666
 667        switch (brd->boardType) {
 668        case MOXA_BOARD_C218_ISA:
 669        case MOXA_BOARD_C218_PCI:
 670        case MOXA_BOARD_CP204J:
 671                port = brd->ports;
 672                for (i = 0; i < brd->numPorts; i++, port++) {
 673                        port->board = brd;
 674                        port->DCDState = 0;
 675                        port->tableAddr = baseAddr + Extern_table +
 676                                        Extern_size * i;
 677                        ofsAddr = port->tableAddr;
 678                        writew(C218rx_mask, ofsAddr + RX_mask);
 679                        writew(C218tx_mask, ofsAddr + TX_mask);
 680                        writew(C218rx_spage + i * C218buf_pageno, ofsAddr + Page_rxb);
 681                        writew(readw(ofsAddr + Page_rxb) + C218rx_pageno, ofsAddr + EndPage_rxb);
 682
 683                        writew(C218tx_spage + i * C218buf_pageno, ofsAddr + Page_txb);
 684                        writew(readw(ofsAddr + Page_txb) + C218tx_pageno, ofsAddr + EndPage_txb);
 685
 686                }
 687                break;
 688        default:
 689                port = brd->ports;
 690                for (i = 0; i < brd->numPorts; i++, port++) {
 691                        port->board = brd;
 692                        port->DCDState = 0;
 693                        port->tableAddr = baseAddr + Extern_table +
 694                                        Extern_size * i;
 695                        ofsAddr = port->tableAddr;
 696                        switch (brd->numPorts) {
 697                        case 8:
 698                                writew(C320p8rx_mask, ofsAddr + RX_mask);
 699                                writew(C320p8tx_mask, ofsAddr + TX_mask);
 700                                writew(C320p8rx_spage + i * C320p8buf_pgno, ofsAddr + Page_rxb);
 701                                writew(readw(ofsAddr + Page_rxb) + C320p8rx_pgno, ofsAddr + EndPage_rxb);
 702                                writew(C320p8tx_spage + i * C320p8buf_pgno, ofsAddr + Page_txb);
 703                                writew(readw(ofsAddr + Page_txb) + C320p8tx_pgno, ofsAddr + EndPage_txb);
 704
 705                                break;
 706                        case 16:
 707                                writew(C320p16rx_mask, ofsAddr + RX_mask);
 708                                writew(C320p16tx_mask, ofsAddr + TX_mask);
 709                                writew(C320p16rx_spage + i * C320p16buf_pgno, ofsAddr + Page_rxb);
 710                                writew(readw(ofsAddr + Page_rxb) + C320p16rx_pgno, ofsAddr + EndPage_rxb);
 711                                writew(C320p16tx_spage + i * C320p16buf_pgno, ofsAddr + Page_txb);
 712                                writew(readw(ofsAddr + Page_txb) + C320p16tx_pgno, ofsAddr + EndPage_txb);
 713                                break;
 714
 715                        case 24:
 716                                writew(C320p24rx_mask, ofsAddr + RX_mask);
 717                                writew(C320p24tx_mask, ofsAddr + TX_mask);
 718                                writew(C320p24rx_spage + i * C320p24buf_pgno, ofsAddr + Page_rxb);
 719                                writew(readw(ofsAddr + Page_rxb) + C320p24rx_pgno, ofsAddr + EndPage_rxb);
 720                                writew(C320p24tx_spage + i * C320p24buf_pgno, ofsAddr + Page_txb);
 721                                writew(readw(ofsAddr + Page_txb), ofsAddr + EndPage_txb);
 722                                break;
 723                        case 32:
 724                                writew(C320p32rx_mask, ofsAddr + RX_mask);
 725                                writew(C320p32tx_mask, ofsAddr + TX_mask);
 726                                writew(C320p32tx_ofs, ofsAddr + Ofs_txb);
 727                                writew(C320p32rx_spage + i * C320p32buf_pgno, ofsAddr + Page_rxb);
 728                                writew(readb(ofsAddr + Page_rxb), ofsAddr + EndPage_rxb);
 729                                writew(C320p32tx_spage + i * C320p32buf_pgno, ofsAddr + Page_txb);
 730                                writew(readw(ofsAddr + Page_txb), ofsAddr + EndPage_txb);
 731                                break;
 732                        }
 733                }
 734                break;
 735        }
 736        return 0;
 737}
 738
 739static int moxa_load_fw(struct moxa_board_conf *brd, const struct firmware *fw)
 740{
 741        const void *ptr = fw->data;
 742        char rsn[64];
 743        u16 lens[5];
 744        size_t len;
 745        unsigned int a, lenp, lencnt;
 746        int ret = -EINVAL;
 747        struct {
 748                __le32 magic;   /* 0x34303430 */
 749                u8 reserved1[2];
 750                u8 type;        /* UNIX = 3 */
 751                u8 model;       /* C218T=1, C320T=2, CP204=3 */
 752                u8 reserved2[8];
 753                __le16 len[5];
 754        } const *hdr = ptr;
 755
 756        BUILD_BUG_ON(ARRAY_SIZE(hdr->len) != ARRAY_SIZE(lens));
 757
 758        if (fw->size < MOXA_FW_HDRLEN) {
 759                strcpy(rsn, "too short (even header won't fit)");
 760                goto err;
 761        }
 762        if (hdr->magic != cpu_to_le32(0x30343034)) {
 763                sprintf(rsn, "bad magic: %.8x", le32_to_cpu(hdr->magic));
 764                goto err;
 765        }
 766        if (hdr->type != 3) {
 767                sprintf(rsn, "not for linux, type is %u", hdr->type);
 768                goto err;
 769        }
 770        if (moxa_check_fw_model(brd, hdr->model)) {
 771                sprintf(rsn, "not for this card, model is %u", hdr->model);
 772                goto err;
 773        }
 774
 775        len = MOXA_FW_HDRLEN;
 776        lencnt = hdr->model == 2 ? 5 : 3;
 777        for (a = 0; a < ARRAY_SIZE(lens); a++) {
 778                lens[a] = le16_to_cpu(hdr->len[a]);
 779                if (lens[a] && len + lens[a] <= fw->size &&
 780                                moxa_check_fw(&fw->data[len]))
 781                        printk(KERN_WARNING "MOXA firmware: unexpected input "
 782                                "at offset %u, but going on\n", (u32)len);
 783                if (!lens[a] && a < lencnt) {
 784                        sprintf(rsn, "too few entries in fw file");
 785                        goto err;
 786                }
 787                len += lens[a];
 788        }
 789
 790        if (len != fw->size) {
 791                sprintf(rsn, "bad length: %u (should be %u)", (u32)fw->size,
 792                                (u32)len);
 793                goto err;
 794        }
 795
 796        ptr += MOXA_FW_HDRLEN;
 797        lenp = 0; /* bios */
 798
 799        strcpy(rsn, "read above");
 800
 801        ret = moxa_load_bios(brd, ptr, lens[lenp]);
 802        if (ret)
 803                goto err;
 804
 805        /* we skip the tty section (lens[1]), since we don't need it */
 806        ptr += lens[lenp] + lens[lenp + 1];
 807        lenp += 2; /* comm */
 808
 809        if (hdr->model == 2) {
 810                ret = moxa_load_320b(brd, ptr, lens[lenp]);
 811                if (ret)
 812                        goto err;
 813                /* skip another tty */
 814                ptr += lens[lenp] + lens[lenp + 1];
 815                lenp += 2;
 816        }
 817
 818        ret = moxa_load_code(brd, ptr, lens[lenp]);
 819        if (ret)
 820                goto err;
 821
 822        return 0;
 823err:
 824        printk(KERN_ERR "firmware failed to load, reason: %s\n", rsn);
 825        return ret;
 826}
 827
 828static int moxa_init_board(struct moxa_board_conf *brd, struct device *dev)
 829{
 830        const struct firmware *fw;
 831        const char *file;
 832        struct moxa_port *p;
 833        unsigned int i, first_idx;
 834        int ret;
 835
 836        brd->ports = kcalloc(MAX_PORTS_PER_BOARD, sizeof(*brd->ports),
 837                        GFP_KERNEL);
 838        if (brd->ports == NULL) {
 839                printk(KERN_ERR "cannot allocate memory for ports\n");
 840                ret = -ENOMEM;
 841                goto err;
 842        }
 843
 844        for (i = 0, p = brd->ports; i < MAX_PORTS_PER_BOARD; i++, p++) {
 845                tty_port_init(&p->port);
 846                p->port.ops = &moxa_port_ops;
 847                p->type = PORT_16550A;
 848                p->cflag = B9600 | CS8 | CREAD | CLOCAL | HUPCL;
 849        }
 850
 851        switch (brd->boardType) {
 852        case MOXA_BOARD_C218_ISA:
 853        case MOXA_BOARD_C218_PCI:
 854                file = "c218tunx.cod";
 855                break;
 856        case MOXA_BOARD_CP204J:
 857                file = "cp204unx.cod";
 858                break;
 859        default:
 860                file = "c320tunx.cod";
 861                break;
 862        }
 863
 864        ret = request_firmware(&fw, file, dev);
 865        if (ret) {
 866                printk(KERN_ERR "MOXA: request_firmware failed. Make sure "
 867                                "you've placed '%s' file into your firmware "
 868                                "loader directory (e.g. /lib/firmware)\n",
 869                                file);
 870                goto err_free;
 871        }
 872
 873        ret = moxa_load_fw(brd, fw);
 874
 875        release_firmware(fw);
 876
 877        if (ret)
 878                goto err_free;
 879
 880        spin_lock_bh(&moxa_lock);
 881        brd->ready = 1;
 882        if (!timer_pending(&moxaTimer))
 883                mod_timer(&moxaTimer, jiffies + HZ / 50);
 884        spin_unlock_bh(&moxa_lock);
 885
 886        first_idx = (brd - moxa_boards) * MAX_PORTS_PER_BOARD;
 887        for (i = 0; i < brd->numPorts; i++)
 888                tty_port_register_device(&brd->ports[i].port, moxaDriver,
 889                                first_idx + i, dev);
 890
 891        return 0;
 892err_free:
 893        for (i = 0; i < MAX_PORTS_PER_BOARD; i++)
 894                tty_port_destroy(&brd->ports[i].port);
 895        kfree(brd->ports);
 896err:
 897        return ret;
 898}
 899
 900static void moxa_board_deinit(struct moxa_board_conf *brd)
 901{
 902        unsigned int a, opened, first_idx;
 903
 904        mutex_lock(&moxa_openlock);
 905        spin_lock_bh(&moxa_lock);
 906        brd->ready = 0;
 907        spin_unlock_bh(&moxa_lock);
 908
 909        /* pci hot-un-plug support */
 910        for (a = 0; a < brd->numPorts; a++)
 911                if (tty_port_initialized(&brd->ports[a].port))
 912                        tty_port_tty_hangup(&brd->ports[a].port, false);
 913
 914        for (a = 0; a < MAX_PORTS_PER_BOARD; a++)
 915                tty_port_destroy(&brd->ports[a].port);
 916
 917        while (1) {
 918                opened = 0;
 919                for (a = 0; a < brd->numPorts; a++)
 920                        if (tty_port_initialized(&brd->ports[a].port))
 921                                opened++;
 922                mutex_unlock(&moxa_openlock);
 923                if (!opened)
 924                        break;
 925                msleep(50);
 926                mutex_lock(&moxa_openlock);
 927        }
 928
 929        first_idx = (brd - moxa_boards) * MAX_PORTS_PER_BOARD;
 930        for (a = 0; a < brd->numPorts; a++)
 931                tty_unregister_device(moxaDriver, first_idx + a);
 932
 933        iounmap(brd->basemem);
 934        brd->basemem = NULL;
 935        kfree(brd->ports);
 936}
 937
 938#ifdef CONFIG_PCI
 939static int moxa_pci_probe(struct pci_dev *pdev,
 940                const struct pci_device_id *ent)
 941{
 942        struct moxa_board_conf *board;
 943        unsigned int i;
 944        int board_type = ent->driver_data;
 945        int retval;
 946
 947        retval = pci_enable_device(pdev);
 948        if (retval) {
 949                dev_err(&pdev->dev, "can't enable pci device\n");
 950                goto err;
 951        }
 952
 953        for (i = 0; i < MAX_BOARDS; i++)
 954                if (moxa_boards[i].basemem == NULL)
 955                        break;
 956
 957        retval = -ENODEV;
 958        if (i >= MAX_BOARDS) {
 959                dev_warn(&pdev->dev, "more than %u MOXA Intellio family boards "
 960                                "found. Board is ignored.\n", MAX_BOARDS);
 961                goto err;
 962        }
 963
 964        board = &moxa_boards[i];
 965
 966        retval = pci_request_region(pdev, 2, "moxa-base");
 967        if (retval) {
 968                dev_err(&pdev->dev, "can't request pci region 2\n");
 969                goto err;
 970        }
 971
 972        board->basemem = ioremap_nocache(pci_resource_start(pdev, 2), 0x4000);
 973        if (board->basemem == NULL) {
 974                dev_err(&pdev->dev, "can't remap io space 2\n");
 975                retval = -ENOMEM;
 976                goto err_reg;
 977        }
 978
 979        board->boardType = board_type;
 980        switch (board_type) {
 981        case MOXA_BOARD_C218_ISA:
 982        case MOXA_BOARD_C218_PCI:
 983                board->numPorts = 8;
 984                break;
 985
 986        case MOXA_BOARD_CP204J:
 987                board->numPorts = 4;
 988                break;
 989        default:
 990                board->numPorts = 0;
 991                break;
 992        }
 993        board->busType = MOXA_BUS_TYPE_PCI;
 994
 995        retval = moxa_init_board(board, &pdev->dev);
 996        if (retval)
 997                goto err_base;
 998
 999        pci_set_drvdata(pdev, board);
1000
1001        dev_info(&pdev->dev, "board '%s' ready (%u ports, firmware loaded)\n",
1002                        moxa_brdname[board_type - 1], board->numPorts);
1003
1004        return 0;
1005err_base:
1006        iounmap(board->basemem);
1007        board->basemem = NULL;
1008err_reg:
1009        pci_release_region(pdev, 2);
1010err:
1011        return retval;
1012}
1013
1014static void moxa_pci_remove(struct pci_dev *pdev)
1015{
1016        struct moxa_board_conf *brd = pci_get_drvdata(pdev);
1017
1018        moxa_board_deinit(brd);
1019
1020        pci_release_region(pdev, 2);
1021}
1022
1023static struct pci_driver moxa_pci_driver = {
1024        .name = "moxa",
1025        .id_table = moxa_pcibrds,
1026        .probe = moxa_pci_probe,
1027        .remove = moxa_pci_remove
1028};
1029#endif /* CONFIG_PCI */
1030
1031static int __init moxa_init(void)
1032{
1033        unsigned int isabrds = 0;
1034        int retval = 0;
1035        struct moxa_board_conf *brd = moxa_boards;
1036        unsigned int i;
1037
1038        printk(KERN_INFO "MOXA Intellio family driver version %s\n",
1039                        MOXA_VERSION);
1040
1041        tty_port_init(&moxa_service_port);
1042
1043        moxaDriver = tty_alloc_driver(MAX_PORTS + 1,
1044                        TTY_DRIVER_REAL_RAW |
1045                        TTY_DRIVER_DYNAMIC_DEV);
1046        if (IS_ERR(moxaDriver))
1047                return PTR_ERR(moxaDriver);
1048
1049        moxaDriver->name = "ttyMX";
1050        moxaDriver->major = ttymajor;
1051        moxaDriver->minor_start = 0;
1052        moxaDriver->type = TTY_DRIVER_TYPE_SERIAL;
1053        moxaDriver->subtype = SERIAL_TYPE_NORMAL;
1054        moxaDriver->init_termios = tty_std_termios;
1055        moxaDriver->init_termios.c_cflag = B9600 | CS8 | CREAD | CLOCAL | HUPCL;
1056        moxaDriver->init_termios.c_ispeed = 9600;
1057        moxaDriver->init_termios.c_ospeed = 9600;
1058        tty_set_operations(moxaDriver, &moxa_ops);
1059        /* Having one more port only for ioctls is ugly */
1060        tty_port_link_device(&moxa_service_port, moxaDriver, MAX_PORTS);
1061
1062        if (tty_register_driver(moxaDriver)) {
1063                printk(KERN_ERR "can't register MOXA Smartio tty driver!\n");
1064                put_tty_driver(moxaDriver);
1065                return -1;
1066        }
1067
1068        /* Find the boards defined from module args. */
1069
1070        for (i = 0; i < MAX_BOARDS; i++) {
1071                if (!baseaddr[i])
1072                        break;
1073                if (type[i] == MOXA_BOARD_C218_ISA ||
1074                                type[i] == MOXA_BOARD_C320_ISA) {
1075                        pr_debug("Moxa board %2d: %s board(baseAddr=%lx)\n",
1076                                        isabrds + 1, moxa_brdname[type[i] - 1],
1077                                        baseaddr[i]);
1078                        brd->boardType = type[i];
1079                        brd->numPorts = type[i] == MOXA_BOARD_C218_ISA ? 8 :
1080                                        numports[i];
1081                        brd->busType = MOXA_BUS_TYPE_ISA;
1082                        brd->basemem = ioremap_nocache(baseaddr[i], 0x4000);
1083                        if (!brd->basemem) {
1084                                printk(KERN_ERR "MOXA: can't remap %lx\n",
1085                                                baseaddr[i]);
1086                                continue;
1087                        }
1088                        if (moxa_init_board(brd, NULL)) {
1089                                iounmap(brd->basemem);
1090                                brd->basemem = NULL;
1091                                continue;
1092                        }
1093
1094                        printk(KERN_INFO "MOXA isa board found at 0x%.8lx and "
1095                                        "ready (%u ports, firmware loaded)\n",
1096                                        baseaddr[i], brd->numPorts);
1097
1098                        brd++;
1099                        isabrds++;
1100                }
1101        }
1102
1103#ifdef CONFIG_PCI
1104        retval = pci_register_driver(&moxa_pci_driver);
1105        if (retval) {
1106                printk(KERN_ERR "Can't register MOXA pci driver!\n");
1107                if (isabrds)
1108                        retval = 0;
1109        }
1110#endif
1111
1112        return retval;
1113}
1114
1115static void __exit moxa_exit(void)
1116{
1117        unsigned int i;
1118
1119#ifdef CONFIG_PCI
1120        pci_unregister_driver(&moxa_pci_driver);
1121#endif
1122
1123        for (i = 0; i < MAX_BOARDS; i++) /* ISA boards */
1124                if (moxa_boards[i].ready)
1125                        moxa_board_deinit(&moxa_boards[i]);
1126
1127        del_timer_sync(&moxaTimer);
1128
1129        if (tty_unregister_driver(moxaDriver))
1130                printk(KERN_ERR "Couldn't unregister MOXA Intellio family "
1131                                "serial driver\n");
1132        put_tty_driver(moxaDriver);
1133}
1134
1135module_init(moxa_init);
1136module_exit(moxa_exit);
1137
1138static void moxa_shutdown(struct tty_port *port)
1139{
1140        struct moxa_port *ch = container_of(port, struct moxa_port, port);
1141        MoxaPortDisable(ch);
1142        MoxaPortFlushData(ch, 2);
1143}
1144
1145static int moxa_carrier_raised(struct tty_port *port)
1146{
1147        struct moxa_port *ch = container_of(port, struct moxa_port, port);
1148        int dcd;
1149
1150        spin_lock_irq(&port->lock);
1151        dcd = ch->DCDState;
1152        spin_unlock_irq(&port->lock);
1153        return dcd;
1154}
1155
1156static void moxa_dtr_rts(struct tty_port *port, int onoff)
1157{
1158        struct moxa_port *ch = container_of(port, struct moxa_port, port);
1159        MoxaPortLineCtrl(ch, onoff, onoff);
1160}
1161
1162
1163static int moxa_open(struct tty_struct *tty, struct file *filp)
1164{
1165        struct moxa_board_conf *brd;
1166        struct moxa_port *ch;
1167        int port;
1168
1169        port = tty->index;
1170        if (port == MAX_PORTS) {
1171                return capable(CAP_SYS_ADMIN) ? 0 : -EPERM;
1172        }
1173        if (mutex_lock_interruptible(&moxa_openlock))
1174                return -ERESTARTSYS;
1175        brd = &moxa_boards[port / MAX_PORTS_PER_BOARD];
1176        if (!brd->ready) {
1177                mutex_unlock(&moxa_openlock);
1178                return -ENODEV;
1179        }
1180
1181        if (port % MAX_PORTS_PER_BOARD >= brd->numPorts) {
1182                mutex_unlock(&moxa_openlock);
1183                return -ENODEV;
1184        }
1185
1186        ch = &brd->ports[port % MAX_PORTS_PER_BOARD];
1187        ch->port.count++;
1188        tty->driver_data = ch;
1189        tty_port_tty_set(&ch->port, tty);
1190        mutex_lock(&ch->port.mutex);
1191        if (!tty_port_initialized(&ch->port)) {
1192                ch->statusflags = 0;
1193                moxa_set_tty_param(tty, &tty->termios);
1194                MoxaPortLineCtrl(ch, 1, 1);
1195                MoxaPortEnable(ch);
1196                MoxaSetFifo(ch, ch->type == PORT_16550A);
1197                tty_port_set_initialized(&ch->port, 1);
1198        }
1199        mutex_unlock(&ch->port.mutex);
1200        mutex_unlock(&moxa_openlock);
1201
1202        return tty_port_block_til_ready(&ch->port, tty, filp);
1203}
1204
1205static void moxa_close(struct tty_struct *tty, struct file *filp)
1206{
1207        struct moxa_port *ch = tty->driver_data;
1208        ch->cflag = tty->termios.c_cflag;
1209        tty_port_close(&ch->port, tty, filp);
1210}
1211
1212static int moxa_write(struct tty_struct *tty,
1213                      const unsigned char *buf, int count)
1214{
1215        struct moxa_port *ch = tty->driver_data;
1216        unsigned long flags;
1217        int len;
1218
1219        if (ch == NULL)
1220                return 0;
1221
1222        spin_lock_irqsave(&moxa_lock, flags);
1223        len = MoxaPortWriteData(tty, buf, count);
1224        spin_unlock_irqrestore(&moxa_lock, flags);
1225
1226        set_bit(LOWWAIT, &ch->statusflags);
1227        return len;
1228}
1229
1230static int moxa_write_room(struct tty_struct *tty)
1231{
1232        struct moxa_port *ch;
1233
1234        if (tty->stopped)
1235                return 0;
1236        ch = tty->driver_data;
1237        if (ch == NULL)
1238                return 0;
1239        return MoxaPortTxFree(ch);
1240}
1241
1242static void moxa_flush_buffer(struct tty_struct *tty)
1243{
1244        struct moxa_port *ch = tty->driver_data;
1245
1246        if (ch == NULL)
1247                return;
1248        MoxaPortFlushData(ch, 1);
1249        tty_wakeup(tty);
1250}
1251
1252static int moxa_chars_in_buffer(struct tty_struct *tty)
1253{
1254        struct moxa_port *ch = tty->driver_data;
1255        int chars;
1256
1257        chars = MoxaPortTxQueue(ch);
1258        if (chars)
1259                /*
1260                 * Make it possible to wakeup anything waiting for output
1261                 * in tty_ioctl.c, etc.
1262                 */
1263                set_bit(EMPTYWAIT, &ch->statusflags);
1264        return chars;
1265}
1266
1267static int moxa_tiocmget(struct tty_struct *tty)
1268{
1269        struct moxa_port *ch = tty->driver_data;
1270        int flag = 0, dtr, rts;
1271
1272        MoxaPortGetLineOut(ch, &dtr, &rts);
1273        if (dtr)
1274                flag |= TIOCM_DTR;
1275        if (rts)
1276                flag |= TIOCM_RTS;
1277        dtr = MoxaPortLineStatus(ch);
1278        if (dtr & 1)
1279                flag |= TIOCM_CTS;
1280        if (dtr & 2)
1281                flag |= TIOCM_DSR;
1282        if (dtr & 4)
1283                flag |= TIOCM_CD;
1284        return flag;
1285}
1286
1287static int moxa_tiocmset(struct tty_struct *tty,
1288                         unsigned int set, unsigned int clear)
1289{
1290        struct moxa_port *ch;
1291        int dtr, rts;
1292
1293        mutex_lock(&moxa_openlock);
1294        ch = tty->driver_data;
1295        if (!ch) {
1296                mutex_unlock(&moxa_openlock);
1297                return -EINVAL;
1298        }
1299
1300        MoxaPortGetLineOut(ch, &dtr, &rts);
1301        if (set & TIOCM_RTS)
1302                rts = 1;
1303        if (set & TIOCM_DTR)
1304                dtr = 1;
1305        if (clear & TIOCM_RTS)
1306                rts = 0;
1307        if (clear & TIOCM_DTR)
1308                dtr = 0;
1309        MoxaPortLineCtrl(ch, dtr, rts);
1310        mutex_unlock(&moxa_openlock);
1311        return 0;
1312}
1313
1314static void moxa_set_termios(struct tty_struct *tty,
1315                struct ktermios *old_termios)
1316{
1317        struct moxa_port *ch = tty->driver_data;
1318
1319        if (ch == NULL)
1320                return;
1321        moxa_set_tty_param(tty, old_termios);
1322        if (!(old_termios->c_cflag & CLOCAL) && C_CLOCAL(tty))
1323                wake_up_interruptible(&ch->port.open_wait);
1324}
1325
1326static void moxa_stop(struct tty_struct *tty)
1327{
1328        struct moxa_port *ch = tty->driver_data;
1329
1330        if (ch == NULL)
1331                return;
1332        MoxaPortTxDisable(ch);
1333        set_bit(TXSTOPPED, &ch->statusflags);
1334}
1335
1336
1337static void moxa_start(struct tty_struct *tty)
1338{
1339        struct moxa_port *ch = tty->driver_data;
1340
1341        if (ch == NULL)
1342                return;
1343
1344        if (!test_bit(TXSTOPPED, &ch->statusflags))
1345                return;
1346
1347        MoxaPortTxEnable(ch);
1348        clear_bit(TXSTOPPED, &ch->statusflags);
1349}
1350
1351static void moxa_hangup(struct tty_struct *tty)
1352{
1353        struct moxa_port *ch = tty->driver_data;
1354        tty_port_hangup(&ch->port);
1355}
1356
1357static void moxa_new_dcdstate(struct moxa_port *p, u8 dcd)
1358{
1359        unsigned long flags;
1360        dcd = !!dcd;
1361
1362        spin_lock_irqsave(&p->port.lock, flags);
1363        if (dcd != p->DCDState) {
1364                p->DCDState = dcd;
1365                spin_unlock_irqrestore(&p->port.lock, flags);
1366                if (!dcd)
1367                        tty_port_tty_hangup(&p->port, true);
1368        }
1369        else
1370                spin_unlock_irqrestore(&p->port.lock, flags);
1371}
1372
1373static int moxa_poll_port(struct moxa_port *p, unsigned int handle,
1374                u16 __iomem *ip)
1375{
1376        struct tty_struct *tty = tty_port_tty_get(&p->port);
1377        void __iomem *ofsAddr;
1378        unsigned int inited = tty_port_initialized(&p->port);
1379        u16 intr;
1380
1381        if (tty) {
1382                if (test_bit(EMPTYWAIT, &p->statusflags) &&
1383                                MoxaPortTxQueue(p) == 0) {
1384                        clear_bit(EMPTYWAIT, &p->statusflags);
1385                        tty_wakeup(tty);
1386                }
1387                if (test_bit(LOWWAIT, &p->statusflags) && !tty->stopped &&
1388                                MoxaPortTxQueue(p) <= WAKEUP_CHARS) {
1389                        clear_bit(LOWWAIT, &p->statusflags);
1390                        tty_wakeup(tty);
1391                }
1392
1393                if (inited && !tty_throttled(tty) &&
1394                                MoxaPortRxQueue(p) > 0) { /* RX */
1395                        MoxaPortReadData(p);
1396                        tty_schedule_flip(&p->port);
1397                }
1398        } else {
1399                clear_bit(EMPTYWAIT, &p->statusflags);
1400                MoxaPortFlushData(p, 0); /* flush RX */
1401        }
1402
1403        if (!handle) /* nothing else to do */
1404                goto put;
1405
1406        intr = readw(ip); /* port irq status */
1407        if (intr == 0)
1408                goto put;
1409
1410        writew(0, ip); /* ACK port */
1411        ofsAddr = p->tableAddr;
1412        if (intr & IntrTx) /* disable tx intr */
1413                writew(readw(ofsAddr + HostStat) & ~WakeupTx,
1414                                ofsAddr + HostStat);
1415
1416        if (!inited)
1417                goto put;
1418
1419        if (tty && (intr & IntrBreak) && !I_IGNBRK(tty)) { /* BREAK */
1420                tty_insert_flip_char(&p->port, 0, TTY_BREAK);
1421                tty_schedule_flip(&p->port);
1422        }
1423
1424        if (intr & IntrLine)
1425                moxa_new_dcdstate(p, readb(ofsAddr + FlagStat) & DCD_state);
1426put:
1427        tty_kref_put(tty);
1428
1429        return 0;
1430}
1431
1432static void moxa_poll(struct timer_list *unused)
1433{
1434        struct moxa_board_conf *brd;
1435        u16 __iomem *ip;
1436        unsigned int card, port, served = 0;
1437
1438        spin_lock(&moxa_lock);
1439        for (card = 0; card < MAX_BOARDS; card++) {
1440                brd = &moxa_boards[card];
1441                if (!brd->ready)
1442                        continue;
1443
1444                served++;
1445
1446                ip = NULL;
1447                if (readb(brd->intPend) == 0xff)
1448                        ip = brd->intTable + readb(brd->intNdx);
1449
1450                for (port = 0; port < brd->numPorts; port++)
1451                        moxa_poll_port(&brd->ports[port], !!ip, ip + port);
1452
1453                if (ip)
1454                        writeb(0, brd->intPend); /* ACK */
1455
1456                if (moxaLowWaterChk) {
1457                        struct moxa_port *p = brd->ports;
1458                        for (port = 0; port < brd->numPorts; port++, p++)
1459                                if (p->lowChkFlag) {
1460                                        p->lowChkFlag = 0;
1461                                        moxa_low_water_check(p->tableAddr);
1462                                }
1463                }
1464        }
1465        moxaLowWaterChk = 0;
1466
1467        if (served)
1468                mod_timer(&moxaTimer, jiffies + HZ / 50);
1469        spin_unlock(&moxa_lock);
1470}
1471
1472/******************************************************************************/
1473
1474static void moxa_set_tty_param(struct tty_struct *tty, struct ktermios *old_termios)
1475{
1476        register struct ktermios *ts = &tty->termios;
1477        struct moxa_port *ch = tty->driver_data;
1478        int rts, cts, txflow, rxflow, xany, baud;
1479
1480        rts = cts = txflow = rxflow = xany = 0;
1481        if (ts->c_cflag & CRTSCTS)
1482                rts = cts = 1;
1483        if (ts->c_iflag & IXON)
1484                txflow = 1;
1485        if (ts->c_iflag & IXOFF)
1486                rxflow = 1;
1487        if (ts->c_iflag & IXANY)
1488                xany = 1;
1489
1490        MoxaPortFlowCtrl(ch, rts, cts, txflow, rxflow, xany);
1491        baud = MoxaPortSetTermio(ch, ts, tty_get_baud_rate(tty));
1492        if (baud == -1)
1493                baud = tty_termios_baud_rate(old_termios);
1494        /* Not put the baud rate into the termios data */
1495        tty_encode_baud_rate(tty, baud, baud);
1496}
1497
1498/*****************************************************************************
1499 *      Driver level functions:                                              *
1500 *****************************************************************************/
1501
1502static void MoxaPortFlushData(struct moxa_port *port, int mode)
1503{
1504        void __iomem *ofsAddr;
1505        if (mode < 0 || mode > 2)
1506                return;
1507        ofsAddr = port->tableAddr;
1508        moxafunc(ofsAddr, FC_FlushQueue, mode);
1509        if (mode != 1) {
1510                port->lowChkFlag = 0;
1511                moxa_low_water_check(ofsAddr);
1512        }
1513}
1514
1515/*
1516 *    Moxa Port Number Description:
1517 *
1518 *      MOXA serial driver supports up to 4 MOXA-C218/C320 boards. And,
1519 *      the port number using in MOXA driver functions will be 0 to 31 for
1520 *      first MOXA board, 32 to 63 for second, 64 to 95 for third and 96
1521 *      to 127 for fourth. For example, if you setup three MOXA boards,
1522 *      first board is C218, second board is C320-16 and third board is
1523 *      C320-32. The port number of first board (C218 - 8 ports) is from
1524 *      0 to 7. The port number of second board (C320 - 16 ports) is form
1525 *      32 to 47. The port number of third board (C320 - 32 ports) is from
1526 *      64 to 95. And those port numbers form 8 to 31, 48 to 63 and 96 to
1527 *      127 will be invalid.
1528 *
1529 *
1530 *      Moxa Functions Description:
1531 *
1532 *      Function 1:     Driver initialization routine, this routine must be
1533 *                      called when initialized driver.
1534 *      Syntax:
1535 *      void MoxaDriverInit();
1536 *
1537 *
1538 *      Function 2:     Moxa driver private IOCTL command processing.
1539 *      Syntax:
1540 *      int  MoxaDriverIoctl(unsigned int cmd, unsigned long arg, int port);
1541 *
1542 *           unsigned int cmd   : IOCTL command
1543 *           unsigned long arg  : IOCTL argument
1544 *           int port           : port number (0 - 127)
1545 *
1546 *           return:    0  (OK)
1547 *                      -EINVAL
1548 *                      -ENOIOCTLCMD
1549 *
1550 *
1551 *      Function 6:     Enable this port to start Tx/Rx data.
1552 *      Syntax:
1553 *      void MoxaPortEnable(int port);
1554 *           int port           : port number (0 - 127)
1555 *
1556 *
1557 *      Function 7:     Disable this port
1558 *      Syntax:
1559 *      void MoxaPortDisable(int port);
1560 *           int port           : port number (0 - 127)
1561 *
1562 *
1563 *      Function 10:    Setting baud rate of this port.
1564 *      Syntax:
1565 *      speed_t MoxaPortSetBaud(int port, speed_t baud);
1566 *           int port           : port number (0 - 127)
1567 *           long baud          : baud rate (50 - 115200)
1568 *
1569 *           return:    0       : this port is invalid or baud < 50
1570 *                      50 - 115200 : the real baud rate set to the port, if
1571 *                                    the argument baud is large than maximun
1572 *                                    available baud rate, the real setting
1573 *                                    baud rate will be the maximun baud rate.
1574 *
1575 *
1576 *      Function 12:    Configure the port.
1577 *      Syntax:
1578 *      int  MoxaPortSetTermio(int port, struct ktermios *termio, speed_t baud);
1579 *           int port           : port number (0 - 127)
1580 *           struct ktermios * termio : termio structure pointer
1581 *           speed_t baud       : baud rate
1582 *
1583 *           return:    -1      : this port is invalid or termio == NULL
1584 *                      0       : setting O.K.
1585 *
1586 *
1587 *      Function 13:    Get the DTR/RTS state of this port.
1588 *      Syntax:
1589 *      int  MoxaPortGetLineOut(int port, int *dtrState, int *rtsState);
1590 *           int port           : port number (0 - 127)
1591 *           int * dtrState     : pointer to INT to receive the current DTR
1592 *                                state. (if NULL, this function will not
1593 *                                write to this address)
1594 *           int * rtsState     : pointer to INT to receive the current RTS
1595 *                                state. (if NULL, this function will not
1596 *                                write to this address)
1597 *
1598 *           return:    -1      : this port is invalid
1599 *                      0       : O.K.
1600 *
1601 *
1602 *      Function 14:    Setting the DTR/RTS output state of this port.
1603 *      Syntax:
1604 *      void MoxaPortLineCtrl(int port, int dtrState, int rtsState);
1605 *           int port           : port number (0 - 127)
1606 *           int dtrState       : DTR output state (0: off, 1: on)
1607 *           int rtsState       : RTS output state (0: off, 1: on)
1608 *
1609 *
1610 *      Function 15:    Setting the flow control of this port.
1611 *      Syntax:
1612 *      void MoxaPortFlowCtrl(int port, int rtsFlow, int ctsFlow, int rxFlow,
1613 *                            int txFlow,int xany);
1614 *           int port           : port number (0 - 127)
1615 *           int rtsFlow        : H/W RTS flow control (0: no, 1: yes)
1616 *           int ctsFlow        : H/W CTS flow control (0: no, 1: yes)
1617 *           int rxFlow         : S/W Rx XON/XOFF flow control (0: no, 1: yes)
1618 *           int txFlow         : S/W Tx XON/XOFF flow control (0: no, 1: yes)
1619 *           int xany           : S/W XANY flow control (0: no, 1: yes)
1620 *
1621 *
1622 *      Function 16:    Get ths line status of this port
1623 *      Syntax:
1624 *      int  MoxaPortLineStatus(int port);
1625 *           int port           : port number (0 - 127)
1626 *
1627 *           return:    Bit 0 - CTS state (0: off, 1: on)
1628 *                      Bit 1 - DSR state (0: off, 1: on)
1629 *                      Bit 2 - DCD state (0: off, 1: on)
1630 *
1631 *
1632 *      Function 19:    Flush the Rx/Tx buffer data of this port.
1633 *      Syntax:
1634 *      void MoxaPortFlushData(int port, int mode);
1635 *           int port           : port number (0 - 127)
1636 *           int mode    
1637 *                      0       : flush the Rx buffer 
1638 *                      1       : flush the Tx buffer 
1639 *                      2       : flush the Rx and Tx buffer 
1640 *
1641 *
1642 *      Function 20:    Write data.
1643 *      Syntax:
1644 *      int  MoxaPortWriteData(int port, unsigned char * buffer, int length);
1645 *           int port           : port number (0 - 127)
1646 *           unsigned char * buffer     : pointer to write data buffer.
1647 *           int length         : write data length
1648 *
1649 *           return:    0 - length      : real write data length
1650 *
1651 *
1652 *      Function 21:    Read data.
1653 *      Syntax:
1654 *      int  MoxaPortReadData(int port, struct tty_struct *tty);
1655 *           int port           : port number (0 - 127)
1656 *           struct tty_struct *tty : tty for data
1657 *
1658 *           return:    0 - length      : real read data length
1659 *
1660 *
1661 *      Function 24:    Get the Tx buffer current queued data bytes
1662 *      Syntax:
1663 *      int  MoxaPortTxQueue(int port);
1664 *           int port           : port number (0 - 127)
1665 *
1666 *           return:    ..      : Tx buffer current queued data bytes
1667 *
1668 *
1669 *      Function 25:    Get the Tx buffer current free space
1670 *      Syntax:
1671 *      int  MoxaPortTxFree(int port);
1672 *           int port           : port number (0 - 127)
1673 *
1674 *           return:    ..      : Tx buffer current free space
1675 *
1676 *
1677 *      Function 26:    Get the Rx buffer current queued data bytes
1678 *      Syntax:
1679 *      int  MoxaPortRxQueue(int port);
1680 *           int port           : port number (0 - 127)
1681 *
1682 *           return:    ..      : Rx buffer current queued data bytes
1683 *
1684 *
1685 *      Function 28:    Disable port data transmission.
1686 *      Syntax:
1687 *      void MoxaPortTxDisable(int port);
1688 *           int port           : port number (0 - 127)
1689 *
1690 *
1691 *      Function 29:    Enable port data transmission.
1692 *      Syntax:
1693 *      void MoxaPortTxEnable(int port);
1694 *           int port           : port number (0 - 127)
1695 *
1696 *
1697 *      Function 31:    Get the received BREAK signal count and reset it.
1698 *      Syntax:
1699 *      int  MoxaPortResetBrkCnt(int port);
1700 *           int port           : port number (0 - 127)
1701 *
1702 *           return:    0 - ..  : BREAK signal count
1703 *
1704 *
1705 */
1706
1707static void MoxaPortEnable(struct moxa_port *port)
1708{
1709        void __iomem *ofsAddr;
1710        u16 lowwater = 512;
1711
1712        ofsAddr = port->tableAddr;
1713        writew(lowwater, ofsAddr + Low_water);
1714        if (MOXA_IS_320(port->board))
1715                moxafunc(ofsAddr, FC_SetBreakIrq, 0);
1716        else
1717                writew(readw(ofsAddr + HostStat) | WakeupBreak,
1718                                ofsAddr + HostStat);
1719
1720        moxafunc(ofsAddr, FC_SetLineIrq, Magic_code);
1721        moxafunc(ofsAddr, FC_FlushQueue, 2);
1722
1723        moxafunc(ofsAddr, FC_EnableCH, Magic_code);
1724        MoxaPortLineStatus(port);
1725}
1726
1727static void MoxaPortDisable(struct moxa_port *port)
1728{
1729        void __iomem *ofsAddr = port->tableAddr;
1730
1731        moxafunc(ofsAddr, FC_SetFlowCtl, 0);    /* disable flow control */
1732        moxafunc(ofsAddr, FC_ClrLineIrq, Magic_code);
1733        writew(0, ofsAddr + HostStat);
1734        moxafunc(ofsAddr, FC_DisableCH, Magic_code);
1735}
1736
1737static speed_t MoxaPortSetBaud(struct moxa_port *port, speed_t baud)
1738{
1739        void __iomem *ofsAddr = port->tableAddr;
1740        unsigned int clock, val;
1741        speed_t max;
1742
1743        max = MOXA_IS_320(port->board) ? 460800 : 921600;
1744        if (baud < 50)
1745                return 0;
1746        if (baud > max)
1747                baud = max;
1748        clock = 921600;
1749        val = clock / baud;
1750        moxafunc(ofsAddr, FC_SetBaud, val);
1751        baud = clock / val;
1752        return baud;
1753}
1754
1755static int MoxaPortSetTermio(struct moxa_port *port, struct ktermios *termio,
1756                speed_t baud)
1757{
1758        void __iomem *ofsAddr;
1759        tcflag_t mode = 0;
1760
1761        ofsAddr = port->tableAddr;
1762
1763        mode = termio->c_cflag & CSIZE;
1764        if (mode == CS5)
1765                mode = MX_CS5;
1766        else if (mode == CS6)
1767                mode = MX_CS6;
1768        else if (mode == CS7)
1769                mode = MX_CS7;
1770        else if (mode == CS8)
1771                mode = MX_CS8;
1772
1773        if (termio->c_cflag & CSTOPB) {
1774                if (mode == MX_CS5)
1775                        mode |= MX_STOP15;
1776                else
1777                        mode |= MX_STOP2;
1778        } else
1779                mode |= MX_STOP1;
1780
1781        if (termio->c_cflag & PARENB) {
1782                if (termio->c_cflag & PARODD) {
1783                        if (termio->c_cflag & CMSPAR)
1784                                mode |= MX_PARMARK;
1785                        else
1786                                mode |= MX_PARODD;
1787                } else {
1788                        if (termio->c_cflag & CMSPAR)
1789                                mode |= MX_PARSPACE;
1790                        else
1791                                mode |= MX_PAREVEN;
1792                }
1793        } else
1794                mode |= MX_PARNONE;
1795
1796        moxafunc(ofsAddr, FC_SetDataMode, (u16)mode);
1797
1798        if (MOXA_IS_320(port->board) && baud >= 921600)
1799                return -1;
1800
1801        baud = MoxaPortSetBaud(port, baud);
1802
1803        if (termio->c_iflag & (IXON | IXOFF | IXANY)) {
1804                spin_lock_irq(&moxafunc_lock);
1805                writeb(termio->c_cc[VSTART], ofsAddr + FuncArg);
1806                writeb(termio->c_cc[VSTOP], ofsAddr + FuncArg1);
1807                writeb(FC_SetXonXoff, ofsAddr + FuncCode);
1808                moxa_wait_finish(ofsAddr);
1809                spin_unlock_irq(&moxafunc_lock);
1810
1811        }
1812        return baud;
1813}
1814
1815static int MoxaPortGetLineOut(struct moxa_port *port, int *dtrState,
1816                int *rtsState)
1817{
1818        if (dtrState)
1819                *dtrState = !!(port->lineCtrl & DTR_ON);
1820        if (rtsState)
1821                *rtsState = !!(port->lineCtrl & RTS_ON);
1822
1823        return 0;
1824}
1825
1826static void MoxaPortLineCtrl(struct moxa_port *port, int dtr, int rts)
1827{
1828        u8 mode = 0;
1829
1830        if (dtr)
1831                mode |= DTR_ON;
1832        if (rts)
1833                mode |= RTS_ON;
1834        port->lineCtrl = mode;
1835        moxafunc(port->tableAddr, FC_LineControl, mode);
1836}
1837
1838static void MoxaPortFlowCtrl(struct moxa_port *port, int rts, int cts,
1839                int txflow, int rxflow, int txany)
1840{
1841        int mode = 0;
1842
1843        if (rts)
1844                mode |= RTS_FlowCtl;
1845        if (cts)
1846                mode |= CTS_FlowCtl;
1847        if (txflow)
1848                mode |= Tx_FlowCtl;
1849        if (rxflow)
1850                mode |= Rx_FlowCtl;
1851        if (txany)
1852                mode |= IXM_IXANY;
1853        moxafunc(port->tableAddr, FC_SetFlowCtl, mode);
1854}
1855
1856static int MoxaPortLineStatus(struct moxa_port *port)
1857{
1858        void __iomem *ofsAddr;
1859        int val;
1860
1861        ofsAddr = port->tableAddr;
1862        if (MOXA_IS_320(port->board))
1863                val = moxafuncret(ofsAddr, FC_LineStatus, 0);
1864        else
1865                val = readw(ofsAddr + FlagStat) >> 4;
1866        val &= 0x0B;
1867        if (val & 8)
1868                val |= 4;
1869        moxa_new_dcdstate(port, val & 8);
1870        val &= 7;
1871        return val;
1872}
1873
1874static int MoxaPortWriteData(struct tty_struct *tty,
1875                const unsigned char *buffer, int len)
1876{
1877        struct moxa_port *port = tty->driver_data;
1878        void __iomem *baseAddr, *ofsAddr, *ofs;
1879        unsigned int c, total;
1880        u16 head, tail, tx_mask, spage, epage;
1881        u16 pageno, pageofs, bufhead;
1882
1883        ofsAddr = port->tableAddr;
1884        baseAddr = port->board->basemem;
1885        tx_mask = readw(ofsAddr + TX_mask);
1886        spage = readw(ofsAddr + Page_txb);
1887        epage = readw(ofsAddr + EndPage_txb);
1888        tail = readw(ofsAddr + TXwptr);
1889        head = readw(ofsAddr + TXrptr);
1890        c = (head > tail) ? (head - tail - 1) : (head - tail + tx_mask);
1891        if (c > len)
1892                c = len;
1893        moxaLog.txcnt[port->port.tty->index] += c;
1894        total = c;
1895        if (spage == epage) {
1896                bufhead = readw(ofsAddr + Ofs_txb);
1897                writew(spage, baseAddr + Control_reg);
1898                while (c > 0) {
1899                        if (head > tail)
1900                                len = head - tail - 1;
1901                        else
1902                                len = tx_mask + 1 - tail;
1903                        len = (c > len) ? len : c;
1904                        ofs = baseAddr + DynPage_addr + bufhead + tail;
1905                        memcpy_toio(ofs, buffer, len);
1906                        buffer += len;
1907                        tail = (tail + len) & tx_mask;
1908                        c -= len;
1909                }
1910        } else {
1911                pageno = spage + (tail >> 13);
1912                pageofs = tail & Page_mask;
1913                while (c > 0) {
1914                        len = Page_size - pageofs;
1915                        if (len > c)
1916                                len = c;
1917                        writeb(pageno, baseAddr + Control_reg);
1918                        ofs = baseAddr + DynPage_addr + pageofs;
1919                        memcpy_toio(ofs, buffer, len);
1920                        buffer += len;
1921                        if (++pageno == epage)
1922                                pageno = spage;
1923                        pageofs = 0;
1924                        c -= len;
1925                }
1926                tail = (tail + total) & tx_mask;
1927        }
1928        writew(tail, ofsAddr + TXwptr);
1929        writeb(1, ofsAddr + CD180TXirq);        /* start to send */
1930        return total;
1931}
1932
1933static int MoxaPortReadData(struct moxa_port *port)
1934{
1935        struct tty_struct *tty = port->port.tty;
1936        unsigned char *dst;
1937        void __iomem *baseAddr, *ofsAddr, *ofs;
1938        unsigned int count, len, total;
1939        u16 tail, rx_mask, spage, epage;
1940        u16 pageno, pageofs, bufhead, head;
1941
1942        ofsAddr = port->tableAddr;
1943        baseAddr = port->board->basemem;
1944        head = readw(ofsAddr + RXrptr);
1945        tail = readw(ofsAddr + RXwptr);
1946        rx_mask = readw(ofsAddr + RX_mask);
1947        spage = readw(ofsAddr + Page_rxb);
1948        epage = readw(ofsAddr + EndPage_rxb);
1949        count = (tail >= head) ? (tail - head) : (tail - head + rx_mask + 1);
1950        if (count == 0)
1951                return 0;
1952
1953        total = count;
1954        moxaLog.rxcnt[tty->index] += total;
1955        if (spage == epage) {
1956                bufhead = readw(ofsAddr + Ofs_rxb);
1957                writew(spage, baseAddr + Control_reg);
1958                while (count > 0) {
1959                        ofs = baseAddr + DynPage_addr + bufhead + head;
1960                        len = (tail >= head) ? (tail - head) :
1961                                        (rx_mask + 1 - head);
1962                        len = tty_prepare_flip_string(&port->port, &dst,
1963                                        min(len, count));
1964                        memcpy_fromio(dst, ofs, len);
1965                        head = (head + len) & rx_mask;
1966                        count -= len;
1967                }
1968        } else {
1969                pageno = spage + (head >> 13);
1970                pageofs = head & Page_mask;
1971                while (count > 0) {
1972                        writew(pageno, baseAddr + Control_reg);
1973                        ofs = baseAddr + DynPage_addr + pageofs;
1974                        len = tty_prepare_flip_string(&port->port, &dst,
1975                                        min(Page_size - pageofs, count));
1976                        memcpy_fromio(dst, ofs, len);
1977
1978                        count -= len;
1979                        pageofs = (pageofs + len) & Page_mask;
1980                        if (pageofs == 0 && ++pageno == epage)
1981                                pageno = spage;
1982                }
1983                head = (head + total) & rx_mask;
1984        }
1985        writew(head, ofsAddr + RXrptr);
1986        if (readb(ofsAddr + FlagStat) & Xoff_state) {
1987                moxaLowWaterChk = 1;
1988                port->lowChkFlag = 1;
1989        }
1990        return total;
1991}
1992
1993
1994static int MoxaPortTxQueue(struct moxa_port *port)
1995{
1996        void __iomem *ofsAddr = port->tableAddr;
1997        u16 rptr, wptr, mask;
1998
1999        rptr = readw(ofsAddr + TXrptr);
2000        wptr = readw(ofsAddr + TXwptr);
2001        mask = readw(ofsAddr + TX_mask);
2002        return (wptr - rptr) & mask;
2003}
2004
2005static int MoxaPortTxFree(struct moxa_port *port)
2006{
2007        void __iomem *ofsAddr = port->tableAddr;
2008        u16 rptr, wptr, mask;
2009
2010        rptr = readw(ofsAddr + TXrptr);
2011        wptr = readw(ofsAddr + TXwptr);
2012        mask = readw(ofsAddr + TX_mask);
2013        return mask - ((wptr - rptr) & mask);
2014}
2015
2016static int MoxaPortRxQueue(struct moxa_port *port)
2017{
2018        void __iomem *ofsAddr = port->tableAddr;
2019        u16 rptr, wptr, mask;
2020
2021        rptr = readw(ofsAddr + RXrptr);
2022        wptr = readw(ofsAddr + RXwptr);
2023        mask = readw(ofsAddr + RX_mask);
2024        return (wptr - rptr) & mask;
2025}
2026
2027static void MoxaPortTxDisable(struct moxa_port *port)
2028{
2029        moxafunc(port->tableAddr, FC_SetXoffState, Magic_code);
2030}
2031
2032static void MoxaPortTxEnable(struct moxa_port *port)
2033{
2034        moxafunc(port->tableAddr, FC_SetXonState, Magic_code);
2035}
2036
2037static int moxa_get_serial_info(struct moxa_port *info,
2038                struct serial_struct __user *retinfo)
2039{
2040        struct serial_struct tmp = {
2041                .type = info->type,
2042                .line = info->port.tty->index,
2043                .flags = info->port.flags,
2044                .baud_base = 921600,
2045                .close_delay = info->port.close_delay
2046        };
2047        return copy_to_user(retinfo, &tmp, sizeof(*retinfo)) ? -EFAULT : 0;
2048}
2049
2050
2051static int moxa_set_serial_info(struct moxa_port *info,
2052                struct serial_struct __user *new_info)
2053{
2054        struct serial_struct new_serial;
2055
2056        if (copy_from_user(&new_serial, new_info, sizeof(new_serial)))
2057                return -EFAULT;
2058
2059        if (new_serial.irq != 0 || new_serial.port != 0 ||
2060                        new_serial.custom_divisor != 0 ||
2061                        new_serial.baud_base != 921600)
2062                return -EPERM;
2063
2064        if (!capable(CAP_SYS_ADMIN)) {
2065                if (((new_serial.flags & ~ASYNC_USR_MASK) !=
2066                     (info->port.flags & ~ASYNC_USR_MASK)))
2067                        return -EPERM;
2068        } else
2069                info->port.close_delay = new_serial.close_delay * HZ / 100;
2070
2071        new_serial.flags = (new_serial.flags & ~ASYNC_FLAGS);
2072        new_serial.flags |= (info->port.flags & ASYNC_FLAGS);
2073
2074        MoxaSetFifo(info, new_serial.type == PORT_16550A);
2075
2076        info->type = new_serial.type;
2077        return 0;
2078}
2079
2080
2081
2082/*****************************************************************************
2083 *      Static local functions:                                              *
2084 *****************************************************************************/
2085
2086static void MoxaSetFifo(struct moxa_port *port, int enable)
2087{
2088        void __iomem *ofsAddr = port->tableAddr;
2089
2090        if (!enable) {
2091                moxafunc(ofsAddr, FC_SetRxFIFOTrig, 0);
2092                moxafunc(ofsAddr, FC_SetTxFIFOCnt, 1);
2093        } else {
2094                moxafunc(ofsAddr, FC_SetRxFIFOTrig, 3);
2095                moxafunc(ofsAddr, FC_SetTxFIFOCnt, 16);
2096        }
2097}
2098