// SPDX-License-Identifier: GPL-2.0
/*
 * MUSB OTG driver register defines
 *
 * Copyright 2005 Mentor Graphics Corporation
 * Copyright (C) 2005-2006 by Texas Instruments
 * Copyright (C) 2006-2007 Nokia Corporation
 */

#ifndef __MUSB_REGS_H__
#define __MUSB_REGS_H__

#define MUSB_EP0_FIFOSIZE       64      /* This is non-configurable */

/*
 * MUSB Register bits
 */

/* POWER */
#define MUSB_POWER_ISOUPDATE    0x80
#define MUSB_POWER_SOFTCONN     0x40
#define MUSB_POWER_HSENAB       0x20
#define MUSB_POWER_HSMODE       0x10
#define MUSB_POWER_RESET        0x08
#define MUSB_POWER_RESUME       0x04
#define MUSB_POWER_SUSPENDM     0x02
#define MUSB_POWER_ENSUSPEND    0x01

/* INTRUSB */
#define MUSB_INTR_SUSPEND       0x01
#define MUSB_INTR_RESUME        0x02
#define MUSB_INTR_RESET         0x04
#define MUSB_INTR_BABBLE        0x04
#define MUSB_INTR_SOF           0x08
#define MUSB_INTR_CONNECT       0x10
#define MUSB_INTR_DISCONNECT    0x20
#define MUSB_INTR_SESSREQ       0x40
#define MUSB_INTR_VBUSERROR     0x80    /* For SESSION end */

/* DEVCTL */
#define MUSB_DEVCTL_BDEVICE     0x80
#define MUSB_DEVCTL_FSDEV       0x40
#define MUSB_DEVCTL_LSDEV       0x20
#define MUSB_DEVCTL_VBUS        0x18
#define MUSB_DEVCTL_VBUS_SHIFT  3
#define MUSB_DEVCTL_HM          0x04
#define MUSB_DEVCTL_HR          0x02
#define MUSB_DEVCTL_SESSION     0x01

/* BABBLE_CTL */
#define MUSB_BABBLE_FORCE_TXIDLE        0x80
#define MUSB_BABBLE_SW_SESSION_CTRL     0x40
#define MUSB_BABBLE_STUCK_J             0x20
#define MUSB_BABBLE_RCV_DISABLE         0x04

/* MUSB ULPI VBUSCONTROL */
#define MUSB_ULPI_USE_EXTVBUS   0x01
#define MUSB_ULPI_USE_EXTVBUSIND 0x02
/* ULPI_REG_CONTROL */
#define MUSB_ULPI_REG_REQ       (1 << 0)
#define MUSB_ULPI_REG_CMPLT     (1 << 1)
#define MUSB_ULPI_RDN_WR        (1 << 2)

/* TESTMODE */
#define MUSB_TEST_FORCE_HOST    0x80
#define MUSB_TEST_FIFO_ACCESS   0x40
#define MUSB_TEST_FORCE_FS      0x20
#define MUSB_TEST_FORCE_HS      0x10
#define MUSB_TEST_PACKET        0x08
#define MUSB_TEST_K             0x04
#define MUSB_TEST_J             0x02
#define MUSB_TEST_SE0_NAK       0x01

/* Allocate for double-packet buffering (effectively doubles assigned _SIZE) */
#define MUSB_FIFOSZ_DPB 0x10
/* Allocation size (8, 16, 32, ... 4096) */
#define MUSB_FIFOSZ_SIZE        0x0f

/* CSR0 */
#define MUSB_CSR0_FLUSHFIFO     0x0100
#define MUSB_CSR0_TXPKTRDY      0x0002
#define MUSB_CSR0_RXPKTRDY      0x0001

/* CSR0 in Peripheral mode */
#define MUSB_CSR0_P_SVDSETUPEND 0x0080
#define MUSB_CSR0_P_SVDRXPKTRDY 0x0040
#define MUSB_CSR0_P_SENDSTALL   0x0020
#define MUSB_CSR0_P_SETUPEND    0x0010
#define MUSB_CSR0_P_DATAEND     0x0008
#define MUSB_CSR0_P_SENTSTALL   0x0004

/* CSR0 in Host mode */
#define MUSB_CSR0_H_DIS_PING            0x0800
#define MUSB_CSR0_H_WR_DATATOGGLE       0x0400  /* Set to allow setting: */
#define MUSB_CSR0_H_DATATOGGLE          0x0200  /* Data toggle control */
#define MUSB_CSR0_H_NAKTIMEOUT          0x0080
#define MUSB_CSR0_H_STATUSPKT           0x0040
#define MUSB_CSR0_H_REQPKT              0x0020
#define MUSB_CSR0_H_ERROR               0x0010
#define MUSB_CSR0_H_SETUPPKT            0x0008
#define MUSB_CSR0_H_RXSTALL             0x0004

/* CSR0 bits to avoid zeroing (write zero clears, write 1 ignored) */
#define MUSB_CSR0_P_WZC_BITS    \
        (MUSB_CSR0_P_SENTSTALL)
#define MUSB_CSR0_H_WZC_BITS    \
        (MUSB_CSR0_H_NAKTIMEOUT | MUSB_CSR0_H_RXSTALL \
        | MUSB_CSR0_RXPKTRDY)

/* TxType/RxType */
#define MUSB_TYPE_SPEED         0xc0
#define MUSB_TYPE_SPEED_SHIFT   6
#define MUSB_TYPE_PROTO         0x30    /* Implicitly zero for ep0 */
#define MUSB_TYPE_PROTO_SHIFT   4
#define MUSB_TYPE_REMOTE_END    0xf     /* Implicitly zero for ep0 */

/* CONFIGDATA */
#define MUSB_CONFIGDATA_MPRXE           0x80    /* Auto bulk pkt combining */
#define MUSB_CONFIGDATA_MPTXE           0x40    /* Auto bulk pkt splitting */
#define MUSB_CONFIGDATA_BIGENDIAN       0x20
#define MUSB_CONFIGDATA_HBRXE           0x10    /* HB-ISO for RX */
#define MUSB_CONFIGDATA_HBTXE           0x08    /* HB-ISO for TX */
#define MUSB_CONFIGDATA_DYNFIFO         0x04    /* Dynamic FIFO sizing */
#define MUSB_CONFIGDATA_SOFTCONE        0x02    /* SoftConnect */
#define MUSB_CONFIGDATA_UTMIDW          0x01    /* Data width 0/1 => 8/16bits */

/* TXCSR in Peripheral and Host mode */
#define MUSB_TXCSR_AUTOSET              0x8000
#define MUSB_TXCSR_DMAENAB              0x1000
#define MUSB_TXCSR_FRCDATATOG           0x0800
#define MUSB_TXCSR_DMAMODE              0x0400
#define MUSB_TXCSR_CLRDATATOG           0x0040
#define MUSB_TXCSR_FLUSHFIFO            0x0008
#define MUSB_TXCSR_FIFONOTEMPTY         0x0002
#define MUSB_TXCSR_TXPKTRDY             0x0001

/* TXCSR in Peripheral mode */
#define MUSB_TXCSR_P_ISO                0x4000
#define MUSB_TXCSR_P_INCOMPTX           0x0080
#define MUSB_TXCSR_P_SENTSTALL          0x0020
#define MUSB_TXCSR_P_SENDSTALL          0x0010
#define MUSB_TXCSR_P_UNDERRUN           0x0004

/* TXCSR in Host mode */
#define MUSB_TXCSR_H_WR_DATATOGGLE      0x0200
#define MUSB_TXCSR_H_DATATOGGLE         0x0100
#define MUSB_TXCSR_H_NAKTIMEOUT         0x0080
#define MUSB_TXCSR_H_RXSTALL            0x0020
#define MUSB_TXCSR_H_ERROR              0x0004

/* TXCSR bits to avoid zeroing (write zero clears, write 1 ignored) */
#define MUSB_TXCSR_P_WZC_BITS   \
        (MUSB_TXCSR_P_INCOMPTX | MUSB_TXCSR_P_SENTSTALL \
        | MUSB_TXCSR_P_UNDERRUN | MUSB_TXCSR_FIFONOTEMPTY)
#define MUSB_TXCSR_H_WZC_BITS   \
        (MUSB_TXCSR_H_NAKTIMEOUT | MUSB_TXCSR_H_RXSTALL \
        | MUSB_TXCSR_H_ERROR | MUSB_TXCSR_FIFONOTEMPTY)

/* RXCSR in Peripheral and Host mode */
#define MUSB_RXCSR_AUTOCLEAR            0x8000
#define MUSB_RXCSR_DMAENAB              0x2000
#define MUSB_RXCSR_DISNYET              0x1000
#define MUSB_RXCSR_PID_ERR              0x1000
#define MUSB_RXCSR_DMAMODE              0x0800
#define MUSB_RXCSR_INCOMPRX             0x0100
#define MUSB_RXCSR_CLRDATATOG           0x0080
#define MUSB_RXCSR_FLUSHFIFO            0x0010
#define MUSB_RXCSR_DATAERROR            0x0008
#define MUSB_RXCSR_FIFOFULL             0x0002
#define MUSB_RXCSR_RXPKTRDY             0x0001

/* RXCSR in Peripheral mode */
#define MUSB_RXCSR_P_ISO                0x4000
#define MUSB_RXCSR_P_SENTSTALL          0x0040
#define MUSB_RXCSR_P_SENDSTALL          0x0020
#define MUSB_RXCSR_P_OVERRUN            0x0004

/* RXCSR in Host mode */
#define MUSB_RXCSR_H_AUTOREQ            0x4000
#define MUSB_RXCSR_H_WR_DATATOGGLE      0x0400
#define MUSB_RXCSR_H_DATATOGGLE         0x0200
#define MUSB_RXCSR_H_RXSTALL            0x0040
#define MUSB_RXCSR_H_REQPKT             0x0020
#define MUSB_RXCSR_H_ERROR              0x0004

/* RXCSR bits to avoid zeroing (write zero clears, write 1 ignored) */
#define MUSB_RXCSR_P_WZC_BITS   \
        (MUSB_RXCSR_P_SENTSTALL | MUSB_RXCSR_P_OVERRUN \
        | MUSB_RXCSR_RXPKTRDY)
#define MUSB_RXCSR_H_WZC_BITS   \
        (MUSB_RXCSR_H_RXSTALL | MUSB_RXCSR_H_ERROR \
        | MUSB_RXCSR_DATAERROR | MUSB_RXCSR_RXPKTRDY)

/* HUBADDR */
#define MUSB_HUBADDR_MULTI_TT           0x80


/*
 * Common USB registers
 */

#define MUSB_FADDR              0x00    /* 8-bit */
#define MUSB_POWER              0x01    /* 8-bit */

#define MUSB_INTRTX             0x02    /* 16-bit */
#define MUSB_INTRRX             0x04
#define MUSB_INTRTXE            0x06
#define MUSB_INTRRXE            0x08
#define MUSB_INTRUSB            0x0A    /* 8 bit */
#define MUSB_INTRUSBE           0x0B    /* 8 bit */
#define MUSB_FRAME              0x0C
#define MUSB_INDEX              0x0E    /* 8 bit */
#define MUSB_TESTMODE           0x0F    /* 8 bit */

/*
 * Additional Control Registers
 */

#define MUSB_DEVCTL             0x60    /* 8 bit */
#define MUSB_BABBLE_CTL         0x61    /* 8 bit */

/* These are always controlled through the INDEX register */
#define MUSB_TXFIFOSZ           0x62    /* 8-bit (see masks) */
#define MUSB_RXFIFOSZ           0x63    /* 8-bit (see masks) */
#define MUSB_TXFIFOADD          0x64    /* 16-bit offset shifted right 3 */
#define MUSB_RXFIFOADD          0x66    /* 16-bit offset shifted right 3 */

/* REVISIT: vctrl/vstatus: optional vendor utmi+phy register at 0x68 */
#define MUSB_HWVERS             0x6C    /* 8 bit */
#define MUSB_ULPI_BUSCONTROL    0x70    /* 8 bit */
#define MUSB_ULPI_INT_MASK      0x72    /* 8 bit */
#define MUSB_ULPI_INT_SRC       0x73    /* 8 bit */
#define MUSB_ULPI_REG_DATA      0x74    /* 8 bit */
#define MUSB_ULPI_REG_ADDR      0x75    /* 8 bit */
#define MUSB_ULPI_REG_CONTROL   0x76    /* 8 bit */
#define MUSB_ULPI_RAW_DATA      0x77    /* 8 bit */

#define MUSB_EPINFO             0x78    /* 8 bit */
#define MUSB_RAMINFO            0x79    /* 8 bit */
#define MUSB_LINKINFO           0x7a    /* 8 bit */
#define MUSB_VPLEN              0x7b    /* 8 bit */
#define MUSB_HS_EOF1            0x7c    /* 8 bit */
#define MUSB_FS_EOF1            0x7d    /* 8 bit */
#define MUSB_LS_EOF1            0x7e    /* 8 bit */

/* Offsets to endpoint registers */
#define MUSB_TXMAXP             0x00
#define MUSB_TXCSR              0x02
#define MUSB_CSR0               MUSB_TXCSR      /* Re-used for EP0 */
#define MUSB_RXMAXP             0x04
#define MUSB_RXCSR              0x06
#define MUSB_RXCOUNT            0x08
#define MUSB_COUNT0             MUSB_RXCOUNT    /* Re-used for EP0 */
#define MUSB_TXTYPE             0x0A
#define MUSB_TYPE0              MUSB_TXTYPE     /* Re-used for EP0 */
#define MUSB_TXINTERVAL         0x0B
#define MUSB_NAKLIMIT0          MUSB_TXINTERVAL /* Re-used for EP0 */
#define MUSB_RXTYPE             0x0C
#define MUSB_RXINTERVAL         0x0D
#define MUSB_FIFOSIZE           0x0F
#define MUSB_CONFIGDATA         MUSB_FIFOSIZE   /* Re-used for EP0 */

#include "tusb6010.h"           /* Needed "only" for TUSB_EP0_CONF */

#define MUSB_TXCSR_MODE                 0x2000

/* "bus control"/target registers, for host side multipoint (external hubs) */
#define MUSB_TXFUNCADDR         0x00
#define MUSB_TXHUBADDR          0x02
#define MUSB_TXHUBPORT          0x03

#define MUSB_RXFUNCADDR         0x04
#define MUSB_RXHUBADDR          0x06
#define MUSB_RXHUBPORT          0x07

static inline u8 musb_read_configdata(void __iomem *mbase)
{
        musb_writeb(mbase, MUSB_INDEX, 0);
        return musb_readb(mbase, 0x10 + MUSB_CONFIGDATA);
}

static inline void musb_write_rxfunaddr(struct musb *musb, u8 epnum,
                u8 qh_addr_reg)
{
        musb_writeb(musb->mregs,
                    musb->io.busctl_offset(epnum, MUSB_RXFUNCADDR),
                    qh_addr_reg);
}

static inline void musb_write_rxhubaddr(struct musb *musb, u8 epnum,
                u8 qh_h_addr_reg)
{
        musb_writeb(musb->mregs, musb->io.busctl_offset(epnum, MUSB_RXHUBADDR),
                        qh_h_addr_reg);
}

static inline void musb_write_rxhubport(struct musb *musb, u8 epnum,
                u8 qh_h_port_reg)
{
        musb_writeb(musb->mregs, musb->io.busctl_offset(epnum, MUSB_RXHUBPORT),
                        qh_h_port_reg);
}

static inline void musb_write_txfunaddr(struct musb *musb, u8 epnum,
                u8 qh_addr_reg)
{
        musb_writeb(musb->mregs,
                    musb->io.busctl_offset(epnum, MUSB_TXFUNCADDR),
                    qh_addr_reg);
}

static inline void musb_write_txhubaddr(struct musb *musb, u8 epnum,
                u8 qh_addr_reg)
{
        musb_writeb(musb->mregs, musb->io.busctl_offset(epnum, MUSB_TXHUBADDR),
                        qh_addr_reg);
}

static inline void musb_write_txhubport(struct musb *musb, u8 epnum,
                u8 qh_h_port_reg)
{
        musb_writeb(musb->mregs, musb->io.busctl_offset(epnum, MUSB_TXHUBPORT),
                        qh_h_port_reg);
}

static inline u8 musb_read_rxfunaddr(struct musb *musb, u8 epnum)
{
        return musb_readb(musb->mregs,
                          musb->io.busctl_offset(epnum, MUSB_RXFUNCADDR));
}

static inline u8 musb_read_rxhubaddr(struct musb *musb, u8 epnum)
{
        return musb_readb(musb->mregs,
                          musb->io.busctl_offset(epnum, MUSB_RXHUBADDR));
}

static inline u8 musb_read_rxhubport(struct musb *musb, u8 epnum)
{
        return musb_readb(musb->mregs,
                          musb->io.busctl_offset(epnum, MUSB_RXHUBPORT));
}

static inline u8 musb_read_txfunaddr(struct musb *musb, u8 epnum)
{
        return musb_readb(musb->mregs,
                          musb->io.busctl_offset(epnum, MUSB_TXFUNCADDR));
}

static inline u8 musb_read_txhubaddr(struct musb *musb, u8 epnum)
{
        return musb_readb(musb->mregs,
                          musb->io.busctl_offset(epnum, MUSB_TXHUBADDR));
}

static inline u8 musb_read_txhubport(struct musb *musb, u8 epnum)
{
        return musb_readb(musb->mregs,
                          musb->io.busctl_offset(epnum, MUSB_TXHUBPORT));
}

#endif  /* __MUSB_REGS_H__ */