/* SPDX-License-Identifier: GPL-2.0-or-later */
/*
 * Kernel execution entry point code.
 *
 *    Copyright (c) 1995-1996 Gary Thomas <gdt@linuxppc.org>
 *      Initial PowerPC version.
 *    Copyright (c) 1996 Cort Dougan <cort@cs.nmt.edu>
 *      Rewritten for PReP
 *    Copyright (c) 1996 Paul Mackerras <paulus@cs.anu.edu.au>
 *      Low-level exception handers, MMU support, and rewrite.
 *    Copyright (c) 1997 Dan Malek <dmalek@jlc.net>
 *      PowerPC 8xx modifications.
 *    Copyright (c) 1998-1999 TiVo, Inc.
 *      PowerPC 403GCX modifications.
 *    Copyright (c) 1999 Grant Erickson <grant@lcse.umn.edu>
 *      PowerPC 403GCX/405GP modifications.
 *    Copyright 2000 MontaVista Software Inc.
 *      PPC405 modifications
 *      PowerPC 403GCX/405GP modifications.
 *      Author: MontaVista Software, Inc.
 *              frank_rowand@mvista.com or source@mvista.com
 *              debbie_chu@mvista.com
 *    Copyright 2002-2004 MontaVista Software, Inc.
 *      PowerPC 44x support, Matt Porter <mporter@kernel.crashing.org>
 *    Copyright 2004 Freescale Semiconductor, Inc
 *      PowerPC e500 modifications, Kumar Gala <galak@kernel.crashing.org>
 */

#include <linux/init.h>
#include <linux/threads.h>
#include <asm/processor.h>
#include <asm/page.h>
#include <asm/mmu.h>
#include <asm/pgtable.h>
#include <asm/cputable.h>
#include <asm/thread_info.h>
#include <asm/ppc_asm.h>
#include <asm/asm-offsets.h>
#include <asm/cache.h>
#include <asm/ptrace.h>
#include <asm/export.h>
#include <asm/feature-fixups.h>
#include "head_booke.h"

/* As with the other PowerPC ports, it is expected that when code
 * execution begins here, the following registers contain valid, yet
 * optional, information:
 *
 *   r3 - Board info structure pointer (DRAM, frequency, MAC address, etc.)
 *   r4 - Starting address of the init RAM disk
 *   r5 - Ending address of the init RAM disk
 *   r6 - Start of kernel command line string (e.g. "mem=128")
 *   r7 - End of kernel command line string
 *
 */
        __HEAD
_ENTRY(_stext);
_ENTRY(_start);
        /*
         * Reserve a word at a fixed location to store the address
         * of abatron_pteptrs
         */
        nop

        /* Translate device tree address to physical, save in r30/r31 */
        bl      get_phys_addr
        mr      r30,r3
        mr      r31,r4

        li      r25,0                   /* phys kernel start (low) */
        li      r24,0                   /* CPU number */
        li      r23,0                   /* phys kernel start (high) */

#ifdef CONFIG_RELOCATABLE
        LOAD_REG_ADDR_PIC(r3, _stext)   /* Get our current runtime base */

        /* Translate _stext address to physical, save in r23/r25 */
        bl      get_phys_addr
        mr      r23,r3
        mr      r25,r4

        bl      0f
0:      mflr    r8
        addis   r3,r8,(is_second_reloc - 0b)@ha
        lwz     r19,(is_second_reloc - 0b)@l(r3)

        /* Check if this is the second relocation. */
        cmpwi   r19,1
        bne     1f

        /*
         * For the second relocation, we already get the real memstart_addr
         * from device tree. So we will map PAGE_OFFSET to memstart_addr,
         * then the virtual address of start kernel should be:
         *          PAGE_OFFSET + (kernstart_addr - memstart_addr)
         * Since the offset between kernstart_addr and memstart_addr should
         * never be beyond 1G, so we can just use the lower 32bit of them
         * for the calculation.
         */
        lis     r3,PAGE_OFFSET@h

        addis   r4,r8,(kernstart_addr - 0b)@ha
        addi    r4,r4,(kernstart_addr - 0b)@l
        lwz     r5,4(r4)

        addis   r6,r8,(memstart_addr - 0b)@ha
        addi    r6,r6,(memstart_addr - 0b)@l
        lwz     r7,4(r6)

        subf    r5,r7,r5
        add     r3,r3,r5
        b       2f

1:
        /*
         * We have the runtime (virutal) address of our base.
         * We calculate our shift of offset from a 64M page.
         * We could map the 64M page we belong to at PAGE_OFFSET and
         * get going from there.
         */
        lis     r4,KERNELBASE@h
        ori     r4,r4,KERNELBASE@l
        rlwinm  r6,r25,0,0x3ffffff              /* r6 = PHYS_START % 64M */
        rlwinm  r5,r4,0,0x3ffffff               /* r5 = KERNELBASE % 64M */
        subf    r3,r5,r6                        /* r3 = r6 - r5 */
        add     r3,r4,r3                        /* Required Virtual Address */

2:      bl      relocate

        /*
         * For the second relocation, we already set the right tlb entries
         * for the kernel space, so skip the code in fsl_booke_entry_mapping.S
        */
        cmpwi   r19,1
        beq     set_ivor
#endif

/* We try to not make any assumptions about how the boot loader
 * setup or used the TLBs.  We invalidate all mappings from the
 * boot loader and load a single entry in TLB1[0] to map the
 * first 64M of kernel memory.  Any boot info passed from the
 * bootloader needs to live in this first 64M.
 *
 * Requirement on bootloader:
 *  - The page we're executing in needs to reside in TLB1 and
 *    have IPROT=1.  If not an invalidate broadcast could
 *    evict the entry we're currently executing in.
 *
 *  r3 = Index of TLB1 were executing in
 *  r4 = Current MSR[IS]
 *  r5 = Index of TLB1 temp mapping
 *
 * Later in mapin_ram we will correctly map lowmem, and resize TLB1[0]
 * if needed
 */

_ENTRY(__early_start)

#define ENTRY_MAPPING_BOOT_SETUP
#include "fsl_booke_entry_mapping.S"
#undef ENTRY_MAPPING_BOOT_SETUP

set_ivor:
        /* Establish the interrupt vector offsets */
        SET_IVOR(0,  CriticalInput);
        SET_IVOR(1,  MachineCheck);
        SET_IVOR(2,  DataStorage);
        SET_IVOR(3,  InstructionStorage);
        SET_IVOR(4,  ExternalInput);
        SET_IVOR(5,  Alignment);
        SET_IVOR(6,  Program);
        SET_IVOR(7,  FloatingPointUnavailable);
        SET_IVOR(8,  SystemCall);
        SET_IVOR(9,  AuxillaryProcessorUnavailable);
        SET_IVOR(10, Decrementer);
        SET_IVOR(11, FixedIntervalTimer);
        SET_IVOR(12, WatchdogTimer);
        SET_IVOR(13, DataTLBError);
        SET_IVOR(14, InstructionTLBError);
        SET_IVOR(15, DebugCrit);

        /* Establish the interrupt vector base */
        lis     r4,interrupt_base@h     /* IVPR only uses the high 16-bits */
        mtspr   SPRN_IVPR,r4

        /* Setup the defaults for TLB entries */
        li      r2,(MAS4_TSIZED(BOOK3E_PAGESZ_4K))@l
#ifdef CONFIG_E200
        oris    r2,r2,MAS4_TLBSELD(1)@h
#endif
        mtspr   SPRN_MAS4, r2

#if !defined(CONFIG_BDI_SWITCH)
        /*
         * The Abatron BDI JTAG debugger does not tolerate others
         * mucking with the debug registers.
         */
        lis     r2,DBCR0_IDM@h
        mtspr   SPRN_DBCR0,r2
        isync
        /* clear any residual debug events */
        li      r2,-1
        mtspr   SPRN_DBSR,r2
#endif

#ifdef CONFIG_SMP
        /* Check to see if we're the second processor, and jump
         * to the secondary_start code if so
         */
        LOAD_REG_ADDR_PIC(r24, boot_cpuid)
        lwz     r24, 0(r24)
        cmpwi   r24, -1
        mfspr   r24,SPRN_PIR
        bne     __secondary_start
#endif

        /*
         * This is where the main kernel code starts.
         */

        /* ptr to current */
        lis     r2,init_task@h
        ori     r2,r2,init_task@l

        /* ptr to current thread */
        addi    r4,r2,THREAD    /* init task's THREAD */
        mtspr   SPRN_SPRG_THREAD,r4

        /* stack */
        lis     r1,init_thread_union@h
        ori     r1,r1,init_thread_union@l
        li      r0,0
        stwu    r0,THREAD_SIZE-STACK_FRAME_OVERHEAD(r1)

#ifdef CONFIG_SMP
        stw     r24, TASK_CPU(r2)
#endif

        bl      early_init

#ifdef CONFIG_RELOCATABLE
        mr      r3,r30
        mr      r4,r31
#ifdef CONFIG_PHYS_64BIT
        mr      r5,r23
        mr      r6,r25
#else
        mr      r5,r25
#endif
        bl      relocate_init
#endif

#ifdef CONFIG_DYNAMIC_MEMSTART
        lis     r3,kernstart_addr@ha
        la      r3,kernstart_addr@l(r3)
#ifdef CONFIG_PHYS_64BIT
        stw     r23,0(r3)
        stw     r25,4(r3)
#else
        stw     r25,0(r3)
#endif
#endif

/*
 * Decide what sort of machine this is and initialize the MMU.
 */
#ifdef CONFIG_KASAN
        bl      kasan_early_init
#endif
        mr      r3,r30
        mr      r4,r31
        bl      machine_init
        bl      MMU_init

        /* Setup PTE pointers for the Abatron bdiGDB */
        lis     r6, swapper_pg_dir@h
        ori     r6, r6, swapper_pg_dir@l
        lis     r5, abatron_pteptrs@h
        ori     r5, r5, abatron_pteptrs@l
        lis     r4, KERNELBASE@h
        ori     r4, r4, KERNELBASE@l
        stw     r5, 0(r4)       /* Save abatron_pteptrs at a fixed location */
        stw     r6, 0(r5)

        /* Let's move on */
        lis     r4,start_kernel@h
        ori     r4,r4,start_kernel@l
        lis     r3,MSR_KERNEL@h
        ori     r3,r3,MSR_KERNEL@l
        mtspr   SPRN_SRR0,r4
        mtspr   SPRN_SRR1,r3
        rfi                     /* change context and jump to start_kernel */

/* Macros to hide the PTE size differences
 *
 * FIND_PTE -- walks the page tables given EA & pgdir pointer
 *   r10 -- EA of fault
 *   r11 -- PGDIR pointer
 *   r12 -- free
 *   label 2: is the bailout case
 *
 * if we find the pte (fall through):
 *   r11 is low pte word
 *   r12 is pointer to the pte
 *   r10 is the pshift from the PGD, if we're a hugepage
 */
#ifdef CONFIG_PTE_64BIT
#ifdef CONFIG_HUGETLB_PAGE
#define FIND_PTE        \
        rlwinm  r12, r10, 13, 19, 29;   /* Compute pgdir/pmd offset */  \
        lwzx    r11, r12, r11;          /* Get pgd/pmd entry */         \
        rlwinm. r12, r11, 0, 0, 20;     /* Extract pt base address */   \
        blt     1000f;                  /* Normal non-huge page */      \
        beq     2f;                     /* Bail if no table */          \
        oris    r11, r11, PD_HUGE@h;    /* Put back address bit */      \
        andi.   r10, r11, HUGEPD_SHIFT_MASK@l; /* extract size field */ \
        xor     r12, r10, r11;          /* drop size bits from pointer */ \
        b       1001f;                                                  \
1000:   rlwimi  r12, r10, 23, 20, 28;   /* Compute pte address */       \
        li      r10, 0;                 /* clear r10 */                 \
1001:   lwz     r11, 4(r12);            /* Get pte entry */
#else
#define FIND_PTE        \
        rlwinm  r12, r10, 13, 19, 29;   /* Compute pgdir/pmd offset */  \
        lwzx    r11, r12, r11;          /* Get pgd/pmd entry */         \
        rlwinm. r12, r11, 0, 0, 20;     /* Extract pt base address */   \
        beq     2f;                     /* Bail if no table */          \
        rlwimi  r12, r10, 23, 20, 28;   /* Compute pte address */       \
        lwz     r11, 4(r12);            /* Get pte entry */
#endif /* HUGEPAGE */
#else /* !PTE_64BIT */
#define FIND_PTE        \
        rlwimi  r11, r10, 12, 20, 29;   /* Create L1 (pgdir/pmd) address */     \
        lwz     r11, 0(r11);            /* Get L1 entry */                      \
        rlwinm. r12, r11, 0, 0, 19;     /* Extract L2 (pte) base address */     \
        beq     2f;                     /* Bail if no table */                  \
        rlwimi  r12, r10, 22, 20, 29;   /* Compute PTE address */               \
        lwz     r11, 0(r12);            /* Get Linux PTE */
#endif

/*
 * Interrupt vector entry code
 *
 * The Book E MMUs are always on so we don't need to handle
 * interrupts in real mode as with previous PPC processors. In
 * this case we handle interrupts in the kernel virtual address
 * space.
 *
 * Interrupt vectors are dynamically placed relative to the
 * interrupt prefix as determined by the address of interrupt_base.
 * The interrupt vectors offsets are programmed using the labels
 * for each interrupt vector entry.
 *
 * Interrupt vectors must be aligned on a 16 byte boundary.
 * We align on a 32 byte cache line boundary for good measure.
 */

interrupt_base:
        /* Critical Input Interrupt */
        CRITICAL_EXCEPTION(0x0100, CRITICAL, CriticalInput, unknown_exception)

        /* Machine Check Interrupt */
#ifdef CONFIG_E200
        /* no RFMCI, MCSRRs on E200 */
        CRITICAL_EXCEPTION(0x0200, MACHINE_CHECK, MachineCheck, \
                           machine_check_exception)
#else
        MCHECK_EXCEPTION(0x0200, MachineCheck, machine_check_exception)
#endif

        /* Data Storage Interrupt */
        START_EXCEPTION(DataStorage)
        NORMAL_EXCEPTION_PROLOG(DATA_STORAGE)
        mfspr   r5,SPRN_ESR             /* Grab the ESR, save it, pass arg3 */
        stw     r5,_ESR(r11)
        mfspr   r4,SPRN_DEAR            /* Grab the DEAR, save it, pass arg2 */
        andis.  r10,r5,(ESR_ILK|ESR_DLK)@h
        bne     1f
        EXC_XFER_LITE(0x0300, handle_page_fault)
1:
        addi    r3,r1,STACK_FRAME_OVERHEAD
        EXC_XFER_LITE(0x0300, CacheLockingException)

        /* Instruction Storage Interrupt */
        INSTRUCTION_STORAGE_EXCEPTION

        /* External Input Interrupt */
        EXCEPTION(0x0500, EXTERNAL, ExternalInput, do_IRQ, EXC_XFER_LITE)

        /* Alignment Interrupt */
        ALIGNMENT_EXCEPTION

        /* Program Interrupt */
        PROGRAM_EXCEPTION

        /* Floating Point Unavailable Interrupt */
#ifdef CONFIG_PPC_FPU
        FP_UNAVAILABLE_EXCEPTION
#else
#ifdef CONFIG_E200
        /* E200 treats 'normal' floating point instructions as FP Unavail exception */
        EXCEPTION(0x0800, FP_UNAVAIL, FloatingPointUnavailable, \
                  program_check_exception, EXC_XFER_STD)
#else
        EXCEPTION(0x0800, FP_UNAVAIL, FloatingPointUnavailable, \
                  unknown_exception, EXC_XFER_STD)
#endif
#endif

        /* System Call Interrupt */
        START_EXCEPTION(SystemCall)
        SYSCALL_ENTRY   0xc00 BOOKE_INTERRUPT_SYSCALL SPRN_SRR1

        /* Auxiliary Processor Unavailable Interrupt */
        EXCEPTION(0x2900, AP_UNAVAIL, AuxillaryProcessorUnavailable, \
                  unknown_exception, EXC_XFER_STD)

        /* Decrementer Interrupt */
        DECREMENTER_EXCEPTION

        /* Fixed Internal Timer Interrupt */
        /* TODO: Add FIT support */
        EXCEPTION(0x3100, FIT, FixedIntervalTimer, \
                  unknown_exception, EXC_XFER_STD)

        /* Watchdog Timer Interrupt */
#ifdef CONFIG_BOOKE_WDT
        CRITICAL_EXCEPTION(0x3200, WATCHDOG, WatchdogTimer, WatchdogException)
#else
        CRITICAL_EXCEPTION(0x3200, WATCHDOG, WatchdogTimer, unknown_exception)
#endif

        /* Data TLB Error Interrupt */
        START_EXCEPTION(DataTLBError)
        mtspr   SPRN_SPRG_WSCRATCH0, r10 /* Save some working registers */
        mfspr   r10, SPRN_SPRG_THREAD
        stw     r11, THREAD_NORMSAVE(0)(r10)
#ifdef CONFIG_KVM_BOOKE_HV
BEGIN_FTR_SECTION
        mfspr   r11, SPRN_SRR1
END_FTR_SECTION_IFSET(CPU_FTR_EMB_HV)
#endif
        stw     r12, THREAD_NORMSAVE(1)(r10)
        stw     r13, THREAD_NORMSAVE(2)(r10)
        mfcr    r13
        stw     r13, THREAD_NORMSAVE(3)(r10)
        DO_KVM  BOOKE_INTERRUPT_DTLB_MISS SPRN_SRR1
START_BTB_FLUSH_SECTION
        mfspr r11, SPRN_SRR1
        andi. r10,r11,MSR_PR
        beq 1f
        BTB_FLUSH(r10)
1:
END_BTB_FLUSH_SECTION
        mfspr   r10, SPRN_DEAR          /* Get faulting address */

        /* If we are faulting a kernel address, we have to use the
         * kernel page tables.
         */
        lis     r11, PAGE_OFFSET@h
        cmplw   5, r10, r11
        blt     5, 3f
        lis     r11, swapper_pg_dir@h
        ori     r11, r11, swapper_pg_dir@l

        mfspr   r12,SPRN_MAS1           /* Set TID to 0 */
        rlwinm  r12,r12,0,16,1
        mtspr   SPRN_MAS1,r12

        b       4f

        /* Get the PGD for the current thread */
3:
        mfspr   r11,SPRN_SPRG_THREAD
        lwz     r11,PGDIR(r11)

4:
        /* Mask of required permission bits. Note that while we
         * do copy ESR:ST to _PAGE_RW position as trying to write
         * to an RO page is pretty common, we don't do it with
         * _PAGE_DIRTY. We could do it, but it's a fairly rare
         * event so I'd rather take the overhead when it happens
         * rather than adding an instruction here. We should measure
         * whether the whole thing is worth it in the first place
         * as we could avoid loading SPRN_ESR completely in the first
         * place...
         *
         * TODO: Is it worth doing that mfspr & rlwimi in the first
         *       place or can we save a couple of instructions here ?
         */
        mfspr   r12,SPRN_ESR
#ifdef CONFIG_PTE_64BIT
        li      r13,_PAGE_PRESENT
        oris    r13,r13,_PAGE_ACCESSED@h
#else
        li      r13,_PAGE_PRESENT|_PAGE_ACCESSED
#endif
        rlwimi  r13,r12,11,29,29

        FIND_PTE
        andc.   r13,r13,r11             /* Check permission */

#ifdef CONFIG_PTE_64BIT
#ifdef CONFIG_SMP
        subf    r13,r11,r12             /* create false data dep */
        lwzx    r13,r11,r13             /* Get upper pte bits */
#else
        lwz     r13,0(r12)              /* Get upper pte bits */
#endif
#endif

        bne     2f                      /* Bail if permission/valid mismach */

        /* Jump to common tlb load */
        b       finish_tlb_load
2:
        /* The bailout.  Restore registers to pre-exception conditions
         * and call the heavyweights to help us out.
         */
        mfspr   r10, SPRN_SPRG_THREAD
        lwz     r11, THREAD_NORMSAVE(3)(r10)
        mtcr    r11
        lwz     r13, THREAD_NORMSAVE(2)(r10)
        lwz     r12, THREAD_NORMSAVE(1)(r10)
        lwz     r11, THREAD_NORMSAVE(0)(r10)
        mfspr   r10, SPRN_SPRG_RSCRATCH0
        b       DataStorage

        /* Instruction TLB Error Interrupt */
        /*
         * Nearly the same as above, except we get our
         * information from different registers and bailout
         * to a different point.
         */
        START_EXCEPTION(InstructionTLBError)
        mtspr   SPRN_SPRG_WSCRATCH0, r10 /* Save some working registers */
        mfspr   r10, SPRN_SPRG_THREAD
        stw     r11, THREAD_NORMSAVE(0)(r10)
#ifdef CONFIG_KVM_BOOKE_HV
BEGIN_FTR_SECTION
        mfspr   r11, SPRN_SRR1
END_FTR_SECTION_IFSET(CPU_FTR_EMB_HV)
#endif
        stw     r12, THREAD_NORMSAVE(1)(r10)
        stw     r13, THREAD_NORMSAVE(2)(r10)
        mfcr    r13
        stw     r13, THREAD_NORMSAVE(3)(r10)
        DO_KVM  BOOKE_INTERRUPT_ITLB_MISS SPRN_SRR1
START_BTB_FLUSH_SECTION
        mfspr r11, SPRN_SRR1
        andi. r10,r11,MSR_PR
        beq 1f
        BTB_FLUSH(r10)
1:
END_BTB_FLUSH_SECTION

        mfspr   r10, SPRN_SRR0          /* Get faulting address */

        /* If we are faulting a kernel address, we have to use the
         * kernel page tables.
         */
        lis     r11, PAGE_OFFSET@h
        cmplw   5, r10, r11
        blt     5, 3f
        lis     r11, swapper_pg_dir@h
        ori     r11, r11, swapper_pg_dir@l

        mfspr   r12,SPRN_MAS1           /* Set TID to 0 */
        rlwinm  r12,r12,0,16,1
        mtspr   SPRN_MAS1,r12

        /* Make up the required permissions for kernel code */
#ifdef CONFIG_PTE_64BIT
        li      r13,_PAGE_PRESENT | _PAGE_BAP_SX
        oris    r13,r13,_PAGE_ACCESSED@h
#else
        li      r13,_PAGE_PRESENT | _PAGE_ACCESSED | _PAGE_EXEC
#endif
        b       4f

        /* Get the PGD for the current thread */
3:
        mfspr   r11,SPRN_SPRG_THREAD
        lwz     r11,PGDIR(r11)

        /* Make up the required permissions for user code */
#ifdef CONFIG_PTE_64BIT
        li      r13,_PAGE_PRESENT | _PAGE_BAP_UX
        oris    r13,r13,_PAGE_ACCESSED@h
#else
        li      r13,_PAGE_PRESENT | _PAGE_ACCESSED | _PAGE_EXEC
#endif

4:
        FIND_PTE
        andc.   r13,r13,r11             /* Check permission */

#ifdef CONFIG_PTE_64BIT
#ifdef CONFIG_SMP
        subf    r13,r11,r12             /* create false data dep */
        lwzx    r13,r11,r13             /* Get upper pte bits */
#else
        lwz     r13,0(r12)              /* Get upper pte bits */
#endif
#endif

        bne     2f                      /* Bail if permission mismach */

        /* Jump to common TLB load point */
        b       finish_tlb_load

2:
        /* The bailout.  Restore registers to pre-exception conditions
         * and call the heavyweights to help us out.
         */
        mfspr   r10, SPRN_SPRG_THREAD
        lwz     r11, THREAD_NORMSAVE(3)(r10)
        mtcr    r11
        lwz     r13, THREAD_NORMSAVE(2)(r10)
        lwz     r12, THREAD_NORMSAVE(1)(r10)
        lwz     r11, THREAD_NORMSAVE(0)(r10)
        mfspr   r10, SPRN_SPRG_RSCRATCH0
        b       InstructionStorage

/* Define SPE handlers for e200 and e500v2 */
#ifdef CONFIG_SPE
        /* SPE Unavailable */
        START_EXCEPTION(SPEUnavailable)
        NORMAL_EXCEPTION_PROLOG(SPE_UNAVAIL)
        beq     1f
        bl      load_up_spe
        b       fast_exception_return
1:      addi    r3,r1,STACK_FRAME_OVERHEAD
        EXC_XFER_LITE(0x2010, KernelSPE)
#elif defined(CONFIG_SPE_POSSIBLE)
        EXCEPTION(0x2020, SPE_UNAVAIL, SPEUnavailable, \
                  unknown_exception, EXC_XFER_STD)
#endif /* CONFIG_SPE_POSSIBLE */

        /* SPE Floating Point Data */
#ifdef CONFIG_SPE
        EXCEPTION(0x2030, SPE_FP_DATA, SPEFloatingPointData,
                  SPEFloatingPointException, EXC_XFER_STD)

        /* SPE Floating Point Round */
        EXCEPTION(0x2050, SPE_FP_ROUND, SPEFloatingPointRound, \
                  SPEFloatingPointRoundException, EXC_XFER_STD)
#elif defined(CONFIG_SPE_POSSIBLE)
        EXCEPTION(0x2040, SPE_FP_DATA, SPEFloatingPointData,
                  unknown_exception, EXC_XFER_STD)
        EXCEPTION(0x2050, SPE_FP_ROUND, SPEFloatingPointRound, \
                  unknown_exception, EXC_XFER_STD)
#endif /* CONFIG_SPE_POSSIBLE */


        /* Performance Monitor */
        EXCEPTION(0x2060, PERFORMANCE_MONITOR, PerformanceMonitor, \
                  performance_monitor_exception, EXC_XFER_STD)

        EXCEPTION(0x2070, DOORBELL, Doorbell, doorbell_exception, EXC_XFER_STD)

        CRITICAL_EXCEPTION(0x2080, DOORBELL_CRITICAL, \
                           CriticalDoorbell, unknown_exception)

        /* Debug Interrupt */
        DEBUG_DEBUG_EXCEPTION
        DEBUG_CRIT_EXCEPTION

        GUEST_DOORBELL_EXCEPTION

        CRITICAL_EXCEPTION(0, GUEST_DBELL_CRIT, CriticalGuestDoorbell, \
                           unknown_exception)

        /* Hypercall */
        EXCEPTION(0, HV_SYSCALL, Hypercall, unknown_exception, EXC_XFER_STD)

        /* Embedded Hypervisor Privilege */
        EXCEPTION(0, HV_PRIV, Ehvpriv, unknown_exception, EXC_XFER_STD)

interrupt_end:

/*
 * Local functions
 */

/*
 * Both the instruction and data TLB miss get to this
 * point to load the TLB.
 *      r10 - tsize encoding (if HUGETLB_PAGE) or available to use
 *      r11 - TLB (info from Linux PTE)
 *      r12 - available to use
 *      r13 - upper bits of PTE (if PTE_64BIT) or available to use
 *      CR5 - results of addr >= PAGE_OFFSET
 *      MAS0, MAS1 - loaded with proper value when we get here
 *      MAS2, MAS3 - will need additional info from Linux PTE
 *      Upon exit, we reload everything and RFI.
 */
finish_tlb_load:
#ifdef CONFIG_HUGETLB_PAGE
        cmpwi   6, r10, 0                       /* check for huge page */
        beq     6, finish_tlb_load_cont         /* !huge */

        /* Alas, we need more scratch registers for hugepages */
        mfspr   r12, SPRN_SPRG_THREAD
        stw     r14, THREAD_NORMSAVE(4)(r12)
        stw     r15, THREAD_NORMSAVE(5)(r12)
        stw     r16, THREAD_NORMSAVE(6)(r12)
        stw     r17, THREAD_NORMSAVE(7)(r12)

        /* Get the next_tlbcam_idx percpu var */
#ifdef CONFIG_SMP
        lwz     r15, TASK_CPU-THREAD(r12)
        lis     r14, __per_cpu_offset@h
        ori     r14, r14, __per_cpu_offset@l
        rlwinm  r15, r15, 2, 0, 29
        lwzx    r16, r14, r15
#else
        li      r16, 0
#endif
        lis     r17, next_tlbcam_idx@h
        ori     r17, r17, next_tlbcam_idx@l
        add     r17, r17, r16                   /* r17 = *next_tlbcam_idx */
        lwz     r15, 0(r17)                     /* r15 = next_tlbcam_idx */

        lis     r14, MAS0_TLBSEL(1)@h           /* select TLB1 (TLBCAM) */
        rlwimi  r14, r15, 16, 4, 15             /* next_tlbcam_idx entry */
        mtspr   SPRN_MAS0, r14

        /* Extract TLB1CFG(NENTRY) */
        mfspr   r16, SPRN_TLB1CFG
        andi.   r16, r16, 0xfff

        /* Update next_tlbcam_idx, wrapping when necessary */
        addi    r15, r15, 1
        cmpw    r15, r16
        blt     100f
        lis     r14, tlbcam_index@h
        ori     r14, r14, tlbcam_index@l
        lwz     r15, 0(r14)
100:    stw     r15, 0(r17)

        /*
         * Calc MAS1_TSIZE from r10 (which has pshift encoded)
         * tlb_enc = (pshift - 10).
         */
        subi    r15, r10, 10
        mfspr   r16, SPRN_MAS1
        rlwimi  r16, r15, 7, 20, 24
        mtspr   SPRN_MAS1, r16

        /* copy the pshift for use later */
        mr      r14, r10

        /* fall through */

#endif /* CONFIG_HUGETLB_PAGE */

        /*
         * We set execute, because we don't have the granularity to
         * properly set this at the page level (Linux problem).
         * Many of these bits are software only.  Bits we don't set
         * here we (properly should) assume have the appropriate value.
         */
finish_tlb_load_cont:
#ifdef CONFIG_PTE_64BIT
        rlwinm  r12, r11, 32-2, 26, 31  /* Move in perm bits */
        andi.   r10, r11, _PAGE_DIRTY
        bne     1f
        li      r10, MAS3_SW | MAS3_UW
        andc    r12, r12, r10
1:      rlwimi  r12, r13, 20, 0, 11     /* grab RPN[32:43] */
        rlwimi  r12, r11, 20, 12, 19    /* grab RPN[44:51] */
2:      mtspr   SPRN_MAS3, r12
BEGIN_MMU_FTR_SECTION
        srwi    r10, r13, 12            /* grab RPN[12:31] */
        mtspr   SPRN_MAS7, r10
END_MMU_FTR_SECTION_IFSET(MMU_FTR_BIG_PHYS)
#else
        li      r10, (_PAGE_EXEC | _PAGE_PRESENT)
        mr      r13, r11
        rlwimi  r10, r11, 31, 29, 29    /* extract _PAGE_DIRTY into SW */
        and     r12, r11, r10
        andi.   r10, r11, _PAGE_USER    /* Test for _PAGE_USER */
        slwi    r10, r12, 1
        or      r10, r10, r12
        iseleq  r12, r12, r10
        rlwimi  r13, r12, 0, 20, 31     /* Get RPN from PTE, merge w/ perms */
        mtspr   SPRN_MAS3, r13
#endif

        mfspr   r12, SPRN_MAS2
#ifdef CONFIG_PTE_64BIT
        rlwimi  r12, r11, 32-19, 27, 31 /* extract WIMGE from pte */
#else
        rlwimi  r12, r11, 26, 27, 31    /* extract WIMGE from pte */
#endif
#ifdef CONFIG_HUGETLB_PAGE
        beq     6, 3f                   /* don't mask if page isn't huge */
        li      r13, 1
        slw     r13, r13, r14
        subi    r13, r13, 1
        rlwinm  r13, r13, 0, 0, 19      /* bottom bits used for WIMGE/etc */
        andc    r12, r12, r13           /* mask off ea bits within the page */
#endif
3:      mtspr   SPRN_MAS2, r12

#ifdef CONFIG_E200
        /* Round robin TLB1 entries assignment */
        mfspr   r12, SPRN_MAS0

        /* Extract TLB1CFG(NENTRY) */
        mfspr   r11, SPRN_TLB1CFG
        andi.   r11, r11, 0xfff

        /* Extract MAS0(NV) */
        andi.   r13, r12, 0xfff
        addi    r13, r13, 1
        cmpw    0, r13, r11
        addi    r12, r12, 1

        /* check if we need to wrap */
        blt     7f

        /* wrap back to first free tlbcam entry */
        lis     r13, tlbcam_index@ha
        lwz     r13, tlbcam_index@l(r13)
        rlwimi  r12, r13, 0, 20, 31
7:
        mtspr   SPRN_MAS0,r12
#endif /* CONFIG_E200 */

tlb_write_entry:
        tlbwe

        /* Done...restore registers and get out of here.  */
        mfspr   r10, SPRN_SPRG_THREAD
#ifdef CONFIG_HUGETLB_PAGE
        beq     6, 8f /* skip restore for 4k page faults */
        lwz     r14, THREAD_NORMSAVE(4)(r10)
        lwz     r15, THREAD_NORMSAVE(5)(r10)
        lwz     r16, THREAD_NORMSAVE(6)(r10)
        lwz     r17, THREAD_NORMSAVE(7)(r10)
#endif
8:      lwz     r11, THREAD_NORMSAVE(3)(r10)
        mtcr    r11
        lwz     r13, THREAD_NORMSAVE(2)(r10)
        lwz     r12, THREAD_NORMSAVE(1)(r10)
        lwz     r11, THREAD_NORMSAVE(0)(r10)
        mfspr   r10, SPRN_SPRG_RSCRATCH0
        rfi                                     /* Force context change */

#ifdef CONFIG_SPE
/* Note that the SPE support is closely modeled after the AltiVec
 * support.  Changes to one are likely to be applicable to the
 * other!  */
_GLOBAL(load_up_spe)
/*
 * Disable SPE for the task which had SPE previously,
 * and save its SPE registers in its thread_struct.
 * Enables SPE for use in the kernel on return.
 * On SMP we know the SPE units are free, since we give it up every
 * switch.  -- Kumar
 */
        mfmsr   r5
        oris    r5,r5,MSR_SPE@h
        mtmsr   r5                      /* enable use of SPE now */
        isync
        /* enable use of SPE after return */
        oris    r9,r9,MSR_SPE@h
        mfspr   r5,SPRN_SPRG_THREAD     /* current task's THREAD (phys) */
        li      r4,1
        li      r10,THREAD_ACC
        stw     r4,THREAD_USED_SPE(r5)
        evlddx  evr4,r10,r5
        evmra   evr4,evr4
        REST_32EVRS(0,r10,r5,THREAD_EVR0)
        blr

/*
 * SPE unavailable trap from kernel - print a message, but let
 * the task use SPE in the kernel until it returns to user mode.
 */
KernelSPE:
        lwz     r3,_MSR(r1)
        oris    r3,r3,MSR_SPE@h
        stw     r3,_MSR(r1)     /* enable use of SPE after return */
#ifdef CONFIG_PRINTK
        lis     r3,87f@h
        ori     r3,r3,87f@l
        mr      r4,r2           /* current */
        lwz     r5,_NIP(r1)
        bl      printk
#endif
        b       ret_from_except
#ifdef CONFIG_PRINTK
87:     .string "SPE used in kernel  (task=%p, pc=%x)  \n"
#endif
        .align  4,0

#endif /* CONFIG_SPE */

/*
 * Translate the effec addr in r3 to phys addr. The phys addr will be put
 * into r3(higher 32bit) and r4(lower 32bit)
 */
get_phys_addr:
        mfmsr   r8
        mfspr   r9,SPRN_PID
        rlwinm  r9,r9,16,0x3fff0000     /* turn PID into MAS6[SPID] */
        rlwimi  r9,r8,28,0x00000001     /* turn MSR[DS] into MAS6[SAS] */
        mtspr   SPRN_MAS6,r9

        tlbsx   0,r3                    /* must succeed */

        mfspr   r8,SPRN_MAS1
        mfspr   r12,SPRN_MAS3
        rlwinm  r9,r8,25,0x1f           /* r9 = log2(page size) */
        li      r10,1024
        slw     r10,r10,r9              /* r10 = page size */
        addi    r10,r10,-1
        and     r11,r3,r10              /* r11 = page offset */
        andc    r4,r12,r10              /* r4 = page base */
        or      r4,r4,r11               /* r4 = devtree phys addr */
#ifdef CONFIG_PHYS_64BIT
        mfspr   r3,SPRN_MAS7
#endif
        blr

/*
 * Global functions
 */

#ifdef CONFIG_E200
/* Adjust or setup IVORs for e200 */
_GLOBAL(__setup_e200_ivors)
        li      r3,DebugDebug@l
        mtspr   SPRN_IVOR15,r3
        li      r3,SPEUnavailable@l
        mtspr   SPRN_IVOR32,r3
        li      r3,SPEFloatingPointData@l
        mtspr   SPRN_IVOR33,r3
        li      r3,SPEFloatingPointRound@l
        mtspr   SPRN_IVOR34,r3
        sync
        blr
#endif

#ifdef CONFIG_E500
#ifndef CONFIG_PPC_E500MC
/* Adjust or setup IVORs for e500v1/v2 */
_GLOBAL(__setup_e500_ivors)
        li      r3,DebugCrit@l
        mtspr   SPRN_IVOR15,r3
        li      r3,SPEUnavailable@l
        mtspr   SPRN_IVOR32,r3
        li      r3,SPEFloatingPointData@l
        mtspr   SPRN_IVOR33,r3
        li      r3,SPEFloatingPointRound@l
        mtspr   SPRN_IVOR34,r3
        li      r3,PerformanceMonitor@l
        mtspr   SPRN_IVOR35,r3
        sync
        blr
#else
/* Adjust or setup IVORs for e500mc */
_GLOBAL(__setup_e500mc_ivors)
        li      r3,DebugDebug@l
        mtspr   SPRN_IVOR15,r3
        li      r3,PerformanceMonitor@l
        mtspr   SPRN_IVOR35,r3
        li      r3,Doorbell@l
        mtspr   SPRN_IVOR36,r3
        li      r3,CriticalDoorbell@l
        mtspr   SPRN_IVOR37,r3
        sync
        blr

/* setup ehv ivors for */
_GLOBAL(__setup_ehv_ivors)
        li      r3,GuestDoorbell@l
        mtspr   SPRN_IVOR38,r3
        li      r3,CriticalGuestDoorbell@l
        mtspr   SPRN_IVOR39,r3
        li      r3,Hypercall@l
        mtspr   SPRN_IVOR40,r3
        li      r3,Ehvpriv@l
        mtspr   SPRN_IVOR41,r3
        sync
        blr
#endif /* CONFIG_PPC_E500MC */
#endif /* CONFIG_E500 */

#ifdef CONFIG_SPE
/*
 * extern void __giveup_spe(struct task_struct *prev)
 *
 */
_GLOBAL(__giveup_spe)
        addi    r3,r3,THREAD            /* want THREAD of task */
        lwz     r5,PT_REGS(r3)

        cmpi    0,r5,0
        SAVE_32EVRS(0, r4, r3, THREAD_EVR0)
        evxor   evr6, evr6, evr6        /* clear out evr6 */
        evmwumiaa evr6, evr6, evr6      /* evr6 <- ACC = 0 * 0 + ACC */
        li      r4,THREAD_ACC
        evstddx evr6, r4, r3            /* save off accumulator */
        beq     1f
        lwz     r4,_MSR-STACK_FRAME_OVERHEAD(r5)
        lis     r3,MSR_SPE@h
        andc    r4,r4,r3                /* disable SPE for previous task */
        stw     r4,_MSR-STACK_FRAME_OVERHEAD(r5)
1:
        blr
#endif /* CONFIG_SPE */

/*
 * extern void abort(void)
 *
 * At present, this routine just applies a system reset.
 */
_GLOBAL(abort)
        li      r13,0
        mtspr   SPRN_DBCR0,r13          /* disable all debug events */
        isync
        mfmsr   r13
        ori     r13,r13,MSR_DE@l        /* Enable Debug Events */
        mtmsr   r13
        isync
        mfspr   r13,SPRN_DBCR0
        lis     r13,(DBCR0_IDM|DBCR0_RST_CHIP)@h
        mtspr   SPRN_DBCR0,r13
        isync

_GLOBAL(set_context)

#ifdef CONFIG_BDI_SWITCH
        /* Context switch the PTE pointer for the Abatron BDI2000.
         * The PGDIR is the second parameter.
         */
        lis     r5, abatron_pteptrs@h
        ori     r5, r5, abatron_pteptrs@l
        stw     r4, 0x4(r5)
#endif
        mtspr   SPRN_PID,r3
        isync                   /* Force context change */
        blr

#ifdef CONFIG_SMP
/* When we get here, r24 needs to hold the CPU # */
        .globl __secondary_start
__secondary_start:
        LOAD_REG_ADDR_PIC(r3, tlbcam_index)
        lwz     r3,0(r3)
        mtctr   r3
        li      r26,0           /* r26 safe? */

        bl      switch_to_as1
        mr      r27,r3          /* tlb entry */
        /* Load each CAM entry */
1:      mr      r3,r26
        bl      loadcam_entry
        addi    r26,r26,1
        bdnz    1b
        mr      r3,r27          /* tlb entry */
        LOAD_REG_ADDR_PIC(r4, memstart_addr)
        lwz     r4,0(r4)
        mr      r5,r25          /* phys kernel start */
        rlwinm  r5,r5,0,~0x3ffffff      /* aligned 64M */
        subf    r4,r5,r4        /* memstart_addr - phys kernel start */
        li      r5,0            /* no device tree */
        li      r6,0            /* not boot cpu */
        bl      restore_to_as0


        lis     r3,__secondary_hold_acknowledge@h
        ori     r3,r3,__secondary_hold_acknowledge@l
        stw     r24,0(r3)

        li      r3,0
        mr      r4,r24          /* Why? */
        bl      call_setup_cpu

        /* get current's stack and current */
        lis     r2,secondary_current@ha
        lwz     r2,secondary_current@l(r2)
        lwz     r1,TASK_STACK(r2)

        /* stack */
        addi    r1,r1,THREAD_SIZE-STACK_FRAME_OVERHEAD
        li      r0,0
        stw     r0,0(r1)

        /* ptr to current thread */
        addi    r4,r2,THREAD    /* address of our thread_struct */
        mtspr   SPRN_SPRG_THREAD,r4

        /* Setup the defaults for TLB entries */
        li      r4,(MAS4_TSIZED(BOOK3E_PAGESZ_4K))@l
        mtspr   SPRN_MAS4,r4

        /* Jump to start_secondary */
        lis     r4,MSR_KERNEL@h
        ori     r4,r4,MSR_KERNEL@l
        lis     r3,start_secondary@h
        ori     r3,r3,start_secondary@l
        mtspr   SPRN_SRR0,r3
        mtspr   SPRN_SRR1,r4
        sync
        rfi
        sync

        .globl __secondary_hold_acknowledge
__secondary_hold_acknowledge:
        .long   -1
#endif

/*
 * Create a tlb entry with the same effective and physical address as
 * the tlb entry used by the current running code. But set the TS to 1.
 * Then switch to the address space 1. It will return with the r3 set to
 * the ESEL of the new created tlb.
 */
_GLOBAL(switch_to_as1)
        mflr    r5

        /* Find a entry not used */
        mfspr   r3,SPRN_TLB1CFG
        andi.   r3,r3,0xfff
        mfspr   r4,SPRN_PID
        rlwinm  r4,r4,16,0x3fff0000     /* turn PID into MAS6[SPID] */
        mtspr   SPRN_MAS6,r4
1:      lis     r4,0x1000               /* Set MAS0(TLBSEL) = 1 */
        addi    r3,r3,-1
        rlwimi  r4,r3,16,4,15           /* Setup MAS0 = TLBSEL | ESEL(r3) */
        mtspr   SPRN_MAS0,r4
        tlbre
        mfspr   r4,SPRN_MAS1
        andis.  r4,r4,MAS1_VALID@h
        bne     1b

        /* Get the tlb entry used by the current running code */
        bl      0f
0:      mflr    r4
        tlbsx   0,r4

        mfspr   r4,SPRN_MAS1
        ori     r4,r4,MAS1_TS           /* Set the TS = 1 */
        mtspr   SPRN_MAS1,r4

        mfspr   r4,SPRN_MAS0
        rlwinm  r4,r4,0,~MAS0_ESEL_MASK
        rlwimi  r4,r3,16,4,15           /* Setup MAS0 = TLBSEL | ESEL(r3) */
        mtspr   SPRN_MAS0,r4
        tlbwe
        isync
        sync

        mfmsr   r4
        ori     r4,r4,MSR_IS | MSR_DS
        mtspr   SPRN_SRR0,r5
        mtspr   SPRN_SRR1,r4
        sync
        rfi

/*
 * Restore to the address space 0 and also invalidate the tlb entry created
 * by switch_to_as1.
 * r3 - the tlb entry which should be invalidated
 * r4 - __pa(PAGE_OFFSET in AS1) - __pa(PAGE_OFFSET in AS0)
 * r5 - device tree virtual address. If r4 is 0, r5 is ignored.
 * r6 - boot cpu
*/
_GLOBAL(restore_to_as0)
        mflr    r0

        bl      0f
0:      mflr    r9
        addi    r9,r9,1f - 0b

        /*
         * We may map the PAGE_OFFSET in AS0 to a different physical address,
         * so we need calculate the right jump and device tree address based
         * on the offset passed by r4.
         */
        add     r9,r9,r4
        add     r5,r5,r4
        add     r0,r0,r4

2:      mfmsr   r7
        li      r8,(MSR_IS | MSR_DS)
        andc    r7,r7,r8

        mtspr   SPRN_SRR0,r9
        mtspr   SPRN_SRR1,r7
        sync
        rfi

        /* Invalidate the temporary tlb entry for AS1 */
1:      lis     r9,0x1000               /* Set MAS0(TLBSEL) = 1 */
        rlwimi  r9,r3,16,4,15           /* Setup MAS0 = TLBSEL | ESEL(r3) */
        mtspr   SPRN_MAS0,r9
        tlbre
        mfspr   r9,SPRN_MAS1
        rlwinm  r9,r9,0,2,31            /* Clear MAS1 Valid and IPPROT */
        mtspr   SPRN_MAS1,r9
        tlbwe
        isync

        cmpwi   r4,0
        cmpwi   cr1,r6,0
        cror    eq,4*cr1+eq,eq
        bne     3f                      /* offset != 0 && is_boot_cpu */
        mtlr    r0
        blr

        /*
         * The PAGE_OFFSET will map to a different physical address,
         * jump to _start to do another relocation again.
        */
3:      mr      r3,r5
        bl      _start

/*
 * We put a few things here that have to be page-aligned. This stuff
 * goes at the beginning of the data segment, which is page-aligned.
 */
        .data
        .align  12
        .globl  sdata
sdata:
        .globl  empty_zero_page
empty_zero_page:
        .space  4096
EXPORT_SYMBOL(empty_zero_page)
        .globl  swapper_pg_dir
swapper_pg_dir:
        .space  PGD_TABLE_SIZE

/*
 * Room for two PTE pointers, usually the kernel and current user pointers
 * to their respective root page table.
 */
abatron_pteptrs:
        .space  8