linux/drivers/gpu/drm/i915/display/intel_dsi_vbt.c
<<
>>
Prefs
   1/*
   2 * Copyright © 2014 Intel Corporation
   3 *
   4 * Permission is hereby granted, free of charge, to any person obtaining a
   5 * copy of this software and associated documentation files (the "Software"),
   6 * to deal in the Software without restriction, including without limitation
   7 * the rights to use, copy, modify, merge, publish, distribute, sublicense,
   8 * and/or sell copies of the Software, and to permit persons to whom the
   9 * Software is furnished to do so, subject to the following conditions:
  10 *
  11 * The above copyright notice and this permission notice (including the next
  12 * paragraph) shall be included in all copies or substantial portions of the
  13 * Software.
  14 *
  15 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
  16 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
  17 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
  18 * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
  19 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
  20 * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
  21 * DEALINGS IN THE SOFTWARE.
  22 *
  23 * Author: Shobhit Kumar <shobhit.kumar@intel.com>
  24 *
  25 */
  26
  27#include <linux/gpio/consumer.h>
  28#include <linux/mfd/intel_soc_pmic.h>
  29#include <linux/slab.h>
  30
  31#include <asm/intel-mid.h>
  32#include <asm/unaligned.h>
  33
  34#include <drm/drm_crtc.h>
  35#include <drm/drm_edid.h>
  36#include <drm/i915_drm.h>
  37
  38#include <video/mipi_display.h>
  39
  40#include "i915_drv.h"
  41#include "intel_display_types.h"
  42#include "intel_dsi.h"
  43#include "intel_sideband.h"
  44
  45#define MIPI_TRANSFER_MODE_SHIFT        0
  46#define MIPI_VIRTUAL_CHANNEL_SHIFT      1
  47#define MIPI_PORT_SHIFT                 3
  48
  49/* base offsets for gpio pads */
  50#define VLV_GPIO_NC_0_HV_DDI0_HPD       0x4130
  51#define VLV_GPIO_NC_1_HV_DDI0_DDC_SDA   0x4120
  52#define VLV_GPIO_NC_2_HV_DDI0_DDC_SCL   0x4110
  53#define VLV_GPIO_NC_3_PANEL0_VDDEN      0x4140
  54#define VLV_GPIO_NC_4_PANEL0_BKLTEN     0x4150
  55#define VLV_GPIO_NC_5_PANEL0_BKLTCTL    0x4160
  56#define VLV_GPIO_NC_6_HV_DDI1_HPD       0x4180
  57#define VLV_GPIO_NC_7_HV_DDI1_DDC_SDA   0x4190
  58#define VLV_GPIO_NC_8_HV_DDI1_DDC_SCL   0x4170
  59#define VLV_GPIO_NC_9_PANEL1_VDDEN      0x4100
  60#define VLV_GPIO_NC_10_PANEL1_BKLTEN    0x40E0
  61#define VLV_GPIO_NC_11_PANEL1_BKLTCTL   0x40F0
  62
  63#define VLV_GPIO_PCONF0(base_offset)    (base_offset)
  64#define VLV_GPIO_PAD_VAL(base_offset)   ((base_offset) + 8)
  65
  66struct gpio_map {
  67        u16 base_offset;
  68        bool init;
  69};
  70
  71static struct gpio_map vlv_gpio_table[] = {
  72        { VLV_GPIO_NC_0_HV_DDI0_HPD },
  73        { VLV_GPIO_NC_1_HV_DDI0_DDC_SDA },
  74        { VLV_GPIO_NC_2_HV_DDI0_DDC_SCL },
  75        { VLV_GPIO_NC_3_PANEL0_VDDEN },
  76        { VLV_GPIO_NC_4_PANEL0_BKLTEN },
  77        { VLV_GPIO_NC_5_PANEL0_BKLTCTL },
  78        { VLV_GPIO_NC_6_HV_DDI1_HPD },
  79        { VLV_GPIO_NC_7_HV_DDI1_DDC_SDA },
  80        { VLV_GPIO_NC_8_HV_DDI1_DDC_SCL },
  81        { VLV_GPIO_NC_9_PANEL1_VDDEN },
  82        { VLV_GPIO_NC_10_PANEL1_BKLTEN },
  83        { VLV_GPIO_NC_11_PANEL1_BKLTCTL },
  84};
  85
  86#define CHV_GPIO_IDX_START_N            0
  87#define CHV_GPIO_IDX_START_E            73
  88#define CHV_GPIO_IDX_START_SW           100
  89#define CHV_GPIO_IDX_START_SE           198
  90
  91#define CHV_VBT_MAX_PINS_PER_FMLY       15
  92
  93#define CHV_GPIO_PAD_CFG0(f, i)         (0x4400 + (f) * 0x400 + (i) * 8)
  94#define  CHV_GPIO_GPIOEN                (1 << 15)
  95#define  CHV_GPIO_GPIOCFG_GPIO          (0 << 8)
  96#define  CHV_GPIO_GPIOCFG_GPO           (1 << 8)
  97#define  CHV_GPIO_GPIOCFG_GPI           (2 << 8)
  98#define  CHV_GPIO_GPIOCFG_HIZ           (3 << 8)
  99#define  CHV_GPIO_GPIOTXSTATE(state)    ((!!(state)) << 1)
 100
 101#define CHV_GPIO_PAD_CFG1(f, i)         (0x4400 + (f) * 0x400 + (i) * 8 + 4)
 102#define  CHV_GPIO_CFGLOCK               (1 << 31)
 103
 104/* ICL DSI Display GPIO Pins */
 105#define  ICL_GPIO_DDSP_HPD_A            0
 106#define  ICL_GPIO_L_VDDEN_1             1
 107#define  ICL_GPIO_L_BKLTEN_1            2
 108#define  ICL_GPIO_DDPA_CTRLCLK_1        3
 109#define  ICL_GPIO_DDPA_CTRLDATA_1       4
 110#define  ICL_GPIO_DDSP_HPD_B            5
 111#define  ICL_GPIO_L_VDDEN_2             6
 112#define  ICL_GPIO_L_BKLTEN_2            7
 113#define  ICL_GPIO_DDPA_CTRLCLK_2        8
 114#define  ICL_GPIO_DDPA_CTRLDATA_2       9
 115
 116static inline enum port intel_dsi_seq_port_to_port(u8 port)
 117{
 118        return port ? PORT_C : PORT_A;
 119}
 120
 121static const u8 *mipi_exec_send_packet(struct intel_dsi *intel_dsi,
 122                                       const u8 *data)
 123{
 124        struct drm_i915_private *dev_priv = to_i915(intel_dsi->base.base.dev);
 125        struct mipi_dsi_device *dsi_device;
 126        u8 type, flags, seq_port;
 127        u16 len;
 128        enum port port;
 129
 130        DRM_DEBUG_KMS("\n");
 131
 132        flags = *data++;
 133        type = *data++;
 134
 135        len = *((u16 *) data);
 136        data += 2;
 137
 138        seq_port = (flags >> MIPI_PORT_SHIFT) & 3;
 139
 140        /* For DSI single link on Port A & C, the seq_port value which is
 141         * parsed from Sequence Block#53 of VBT has been set to 0
 142         * Now, read/write of packets for the DSI single link on Port A and
 143         * Port C will based on the DVO port from VBT block 2.
 144         */
 145        if (intel_dsi->ports == (1 << PORT_C))
 146                port = PORT_C;
 147        else
 148                port = intel_dsi_seq_port_to_port(seq_port);
 149
 150        dsi_device = intel_dsi->dsi_hosts[port]->device;
 151        if (!dsi_device) {
 152                DRM_DEBUG_KMS("no dsi device for port %c\n", port_name(port));
 153                goto out;
 154        }
 155
 156        if ((flags >> MIPI_TRANSFER_MODE_SHIFT) & 1)
 157                dsi_device->mode_flags &= ~MIPI_DSI_MODE_LPM;
 158        else
 159                dsi_device->mode_flags |= MIPI_DSI_MODE_LPM;
 160
 161        dsi_device->channel = (flags >> MIPI_VIRTUAL_CHANNEL_SHIFT) & 3;
 162
 163        switch (type) {
 164        case MIPI_DSI_GENERIC_SHORT_WRITE_0_PARAM:
 165                mipi_dsi_generic_write(dsi_device, NULL, 0);
 166                break;
 167        case MIPI_DSI_GENERIC_SHORT_WRITE_1_PARAM:
 168                mipi_dsi_generic_write(dsi_device, data, 1);
 169                break;
 170        case MIPI_DSI_GENERIC_SHORT_WRITE_2_PARAM:
 171                mipi_dsi_generic_write(dsi_device, data, 2);
 172                break;
 173        case MIPI_DSI_GENERIC_READ_REQUEST_0_PARAM:
 174        case MIPI_DSI_GENERIC_READ_REQUEST_1_PARAM:
 175        case MIPI_DSI_GENERIC_READ_REQUEST_2_PARAM:
 176                DRM_DEBUG_DRIVER("Generic Read not yet implemented or used\n");
 177                break;
 178        case MIPI_DSI_GENERIC_LONG_WRITE:
 179                mipi_dsi_generic_write(dsi_device, data, len);
 180                break;
 181        case MIPI_DSI_DCS_SHORT_WRITE:
 182                mipi_dsi_dcs_write_buffer(dsi_device, data, 1);
 183                break;
 184        case MIPI_DSI_DCS_SHORT_WRITE_PARAM:
 185                mipi_dsi_dcs_write_buffer(dsi_device, data, 2);
 186                break;
 187        case MIPI_DSI_DCS_READ:
 188                DRM_DEBUG_DRIVER("DCS Read not yet implemented or used\n");
 189                break;
 190        case MIPI_DSI_DCS_LONG_WRITE:
 191                mipi_dsi_dcs_write_buffer(dsi_device, data, len);
 192                break;
 193        }
 194
 195        if (INTEL_GEN(dev_priv) < 11)
 196                vlv_dsi_wait_for_fifo_empty(intel_dsi, port);
 197
 198out:
 199        data += len;
 200
 201        return data;
 202}
 203
 204static const u8 *mipi_exec_delay(struct intel_dsi *intel_dsi, const u8 *data)
 205{
 206        u32 delay = *((const u32 *) data);
 207
 208        DRM_DEBUG_KMS("\n");
 209
 210        usleep_range(delay, delay + 10);
 211        data += 4;
 212
 213        return data;
 214}
 215
 216static void vlv_exec_gpio(struct drm_i915_private *dev_priv,
 217                          u8 gpio_source, u8 gpio_index, bool value)
 218{
 219        struct gpio_map *map;
 220        u16 pconf0, padval;
 221        u32 tmp;
 222        u8 port;
 223
 224        if (gpio_index >= ARRAY_SIZE(vlv_gpio_table)) {
 225                DRM_DEBUG_KMS("unknown gpio index %u\n", gpio_index);
 226                return;
 227        }
 228
 229        map = &vlv_gpio_table[gpio_index];
 230
 231        if (dev_priv->vbt.dsi.seq_version >= 3) {
 232                /* XXX: this assumes vlv_gpio_table only has NC GPIOs. */
 233                port = IOSF_PORT_GPIO_NC;
 234        } else {
 235                if (gpio_source == 0) {
 236                        port = IOSF_PORT_GPIO_NC;
 237                } else if (gpio_source == 1) {
 238                        DRM_DEBUG_KMS("SC gpio not supported\n");
 239                        return;
 240                } else {
 241                        DRM_DEBUG_KMS("unknown gpio source %u\n", gpio_source);
 242                        return;
 243                }
 244        }
 245
 246        pconf0 = VLV_GPIO_PCONF0(map->base_offset);
 247        padval = VLV_GPIO_PAD_VAL(map->base_offset);
 248
 249        vlv_iosf_sb_get(dev_priv, BIT(VLV_IOSF_SB_GPIO));
 250        if (!map->init) {
 251                /* FIXME: remove constant below */
 252                vlv_iosf_sb_write(dev_priv, port, pconf0, 0x2000CC00);
 253                map->init = true;
 254        }
 255
 256        tmp = 0x4 | value;
 257        vlv_iosf_sb_write(dev_priv, port, padval, tmp);
 258        vlv_iosf_sb_put(dev_priv, BIT(VLV_IOSF_SB_GPIO));
 259}
 260
 261static void chv_exec_gpio(struct drm_i915_private *dev_priv,
 262                          u8 gpio_source, u8 gpio_index, bool value)
 263{
 264        u16 cfg0, cfg1;
 265        u16 family_num;
 266        u8 port;
 267
 268        if (dev_priv->vbt.dsi.seq_version >= 3) {
 269                if (gpio_index >= CHV_GPIO_IDX_START_SE) {
 270                        /* XXX: it's unclear whether 255->57 is part of SE. */
 271                        gpio_index -= CHV_GPIO_IDX_START_SE;
 272                        port = CHV_IOSF_PORT_GPIO_SE;
 273                } else if (gpio_index >= CHV_GPIO_IDX_START_SW) {
 274                        gpio_index -= CHV_GPIO_IDX_START_SW;
 275                        port = CHV_IOSF_PORT_GPIO_SW;
 276                } else if (gpio_index >= CHV_GPIO_IDX_START_E) {
 277                        gpio_index -= CHV_GPIO_IDX_START_E;
 278                        port = CHV_IOSF_PORT_GPIO_E;
 279                } else {
 280                        port = CHV_IOSF_PORT_GPIO_N;
 281                }
 282        } else {
 283                /* XXX: The spec is unclear about CHV GPIO on seq v2 */
 284                if (gpio_source != 0) {
 285                        DRM_DEBUG_KMS("unknown gpio source %u\n", gpio_source);
 286                        return;
 287                }
 288
 289                if (gpio_index >= CHV_GPIO_IDX_START_E) {
 290                        DRM_DEBUG_KMS("invalid gpio index %u for GPIO N\n",
 291                                      gpio_index);
 292                        return;
 293                }
 294
 295                port = CHV_IOSF_PORT_GPIO_N;
 296        }
 297
 298        family_num = gpio_index / CHV_VBT_MAX_PINS_PER_FMLY;
 299        gpio_index = gpio_index % CHV_VBT_MAX_PINS_PER_FMLY;
 300
 301        cfg0 = CHV_GPIO_PAD_CFG0(family_num, gpio_index);
 302        cfg1 = CHV_GPIO_PAD_CFG1(family_num, gpio_index);
 303
 304        vlv_iosf_sb_get(dev_priv, BIT(VLV_IOSF_SB_GPIO));
 305        vlv_iosf_sb_write(dev_priv, port, cfg1, 0);
 306        vlv_iosf_sb_write(dev_priv, port, cfg0,
 307                          CHV_GPIO_GPIOEN | CHV_GPIO_GPIOCFG_GPO |
 308                          CHV_GPIO_GPIOTXSTATE(value));
 309        vlv_iosf_sb_put(dev_priv, BIT(VLV_IOSF_SB_GPIO));
 310}
 311
 312static void bxt_exec_gpio(struct drm_i915_private *dev_priv,
 313                          u8 gpio_source, u8 gpio_index, bool value)
 314{
 315        /* XXX: this table is a quick ugly hack. */
 316        static struct gpio_desc *bxt_gpio_table[U8_MAX + 1];
 317        struct gpio_desc *gpio_desc = bxt_gpio_table[gpio_index];
 318
 319        if (!gpio_desc) {
 320                gpio_desc = devm_gpiod_get_index(dev_priv->drm.dev,
 321                                                 NULL, gpio_index,
 322                                                 value ? GPIOD_OUT_LOW :
 323                                                 GPIOD_OUT_HIGH);
 324
 325                if (IS_ERR_OR_NULL(gpio_desc)) {
 326                        DRM_ERROR("GPIO index %u request failed (%ld)\n",
 327                                  gpio_index, PTR_ERR(gpio_desc));
 328                        return;
 329                }
 330
 331                bxt_gpio_table[gpio_index] = gpio_desc;
 332        }
 333
 334        gpiod_set_value(gpio_desc, value);
 335}
 336
 337static void icl_exec_gpio(struct drm_i915_private *dev_priv,
 338                          u8 gpio_source, u8 gpio_index, bool value)
 339{
 340        DRM_DEBUG_KMS("Skipping ICL GPIO element execution\n");
 341}
 342
 343static const u8 *mipi_exec_gpio(struct intel_dsi *intel_dsi, const u8 *data)
 344{
 345        struct drm_device *dev = intel_dsi->base.base.dev;
 346        struct drm_i915_private *dev_priv = to_i915(dev);
 347        u8 gpio_source, gpio_index = 0, gpio_number;
 348        bool value;
 349
 350        DRM_DEBUG_KMS("\n");
 351
 352        if (dev_priv->vbt.dsi.seq_version >= 3)
 353                gpio_index = *data++;
 354
 355        gpio_number = *data++;
 356
 357        /* gpio source in sequence v2 only */
 358        if (dev_priv->vbt.dsi.seq_version == 2)
 359                gpio_source = (*data >> 1) & 3;
 360        else
 361                gpio_source = 0;
 362
 363        /* pull up/down */
 364        value = *data++ & 1;
 365
 366        if (INTEL_GEN(dev_priv) >= 11)
 367                icl_exec_gpio(dev_priv, gpio_source, gpio_index, value);
 368        else if (IS_VALLEYVIEW(dev_priv))
 369                vlv_exec_gpio(dev_priv, gpio_source, gpio_number, value);
 370        else if (IS_CHERRYVIEW(dev_priv))
 371                chv_exec_gpio(dev_priv, gpio_source, gpio_number, value);
 372        else
 373                bxt_exec_gpio(dev_priv, gpio_source, gpio_index, value);
 374
 375        return data;
 376}
 377
 378static const u8 *mipi_exec_i2c(struct intel_dsi *intel_dsi, const u8 *data)
 379{
 380        DRM_DEBUG_KMS("Skipping I2C element execution\n");
 381
 382        return data + *(data + 6) + 7;
 383}
 384
 385static const u8 *mipi_exec_spi(struct intel_dsi *intel_dsi, const u8 *data)
 386{
 387        DRM_DEBUG_KMS("Skipping SPI element execution\n");
 388
 389        return data + *(data + 5) + 6;
 390}
 391
 392static const u8 *mipi_exec_pmic(struct intel_dsi *intel_dsi, const u8 *data)
 393{
 394#ifdef CONFIG_PMIC_OPREGION
 395        u32 value, mask, reg_address;
 396        u16 i2c_address;
 397        int ret;
 398
 399        /* byte 0 aka PMIC Flag is reserved */
 400        i2c_address     = get_unaligned_le16(data + 1);
 401        reg_address     = get_unaligned_le32(data + 3);
 402        value           = get_unaligned_le32(data + 7);
 403        mask            = get_unaligned_le32(data + 11);
 404
 405        ret = intel_soc_pmic_exec_mipi_pmic_seq_element(i2c_address,
 406                                                        reg_address,
 407                                                        value, mask);
 408        if (ret)
 409                DRM_ERROR("%s failed, error: %d\n", __func__, ret);
 410#else
 411        DRM_ERROR("Your hardware requires CONFIG_PMIC_OPREGION and it is not set\n");
 412#endif
 413
 414        return data + 15;
 415}
 416
 417typedef const u8 * (*fn_mipi_elem_exec)(struct intel_dsi *intel_dsi,
 418                                        const u8 *data);
 419static const fn_mipi_elem_exec exec_elem[] = {
 420        [MIPI_SEQ_ELEM_SEND_PKT] = mipi_exec_send_packet,
 421        [MIPI_SEQ_ELEM_DELAY] = mipi_exec_delay,
 422        [MIPI_SEQ_ELEM_GPIO] = mipi_exec_gpio,
 423        [MIPI_SEQ_ELEM_I2C] = mipi_exec_i2c,
 424        [MIPI_SEQ_ELEM_SPI] = mipi_exec_spi,
 425        [MIPI_SEQ_ELEM_PMIC] = mipi_exec_pmic,
 426};
 427
 428/*
 429 * MIPI Sequence from VBT #53 parsing logic
 430 * We have already separated each seqence during bios parsing
 431 * Following is generic execution function for any sequence
 432 */
 433
 434static const char * const seq_name[] = {
 435        [MIPI_SEQ_DEASSERT_RESET] = "MIPI_SEQ_DEASSERT_RESET",
 436        [MIPI_SEQ_INIT_OTP] = "MIPI_SEQ_INIT_OTP",
 437        [MIPI_SEQ_DISPLAY_ON] = "MIPI_SEQ_DISPLAY_ON",
 438        [MIPI_SEQ_DISPLAY_OFF]  = "MIPI_SEQ_DISPLAY_OFF",
 439        [MIPI_SEQ_ASSERT_RESET] = "MIPI_SEQ_ASSERT_RESET",
 440        [MIPI_SEQ_BACKLIGHT_ON] = "MIPI_SEQ_BACKLIGHT_ON",
 441        [MIPI_SEQ_BACKLIGHT_OFF] = "MIPI_SEQ_BACKLIGHT_OFF",
 442        [MIPI_SEQ_TEAR_ON] = "MIPI_SEQ_TEAR_ON",
 443        [MIPI_SEQ_TEAR_OFF] = "MIPI_SEQ_TEAR_OFF",
 444        [MIPI_SEQ_POWER_ON] = "MIPI_SEQ_POWER_ON",
 445        [MIPI_SEQ_POWER_OFF] = "MIPI_SEQ_POWER_OFF",
 446};
 447
 448static const char *sequence_name(enum mipi_seq seq_id)
 449{
 450        if (seq_id < ARRAY_SIZE(seq_name) && seq_name[seq_id])
 451                return seq_name[seq_id];
 452        else
 453                return "(unknown)";
 454}
 455
 456void intel_dsi_vbt_exec_sequence(struct intel_dsi *intel_dsi,
 457                                 enum mipi_seq seq_id)
 458{
 459        struct drm_i915_private *dev_priv = to_i915(intel_dsi->base.base.dev);
 460        const u8 *data;
 461        fn_mipi_elem_exec mipi_elem_exec;
 462
 463        if (WARN_ON(seq_id >= ARRAY_SIZE(dev_priv->vbt.dsi.sequence)))
 464                return;
 465
 466        data = dev_priv->vbt.dsi.sequence[seq_id];
 467        if (!data)
 468                return;
 469
 470        WARN_ON(*data != seq_id);
 471
 472        DRM_DEBUG_KMS("Starting MIPI sequence %d - %s\n",
 473                      seq_id, sequence_name(seq_id));
 474
 475        /* Skip Sequence Byte. */
 476        data++;
 477
 478        /* Skip Size of Sequence. */
 479        if (dev_priv->vbt.dsi.seq_version >= 3)
 480                data += 4;
 481
 482        while (1) {
 483                u8 operation_byte = *data++;
 484                u8 operation_size = 0;
 485
 486                if (operation_byte == MIPI_SEQ_ELEM_END)
 487                        break;
 488
 489                if (operation_byte < ARRAY_SIZE(exec_elem))
 490                        mipi_elem_exec = exec_elem[operation_byte];
 491                else
 492                        mipi_elem_exec = NULL;
 493
 494                /* Size of Operation. */
 495                if (dev_priv->vbt.dsi.seq_version >= 3)
 496                        operation_size = *data++;
 497
 498                if (mipi_elem_exec) {
 499                        const u8 *next = data + operation_size;
 500
 501                        data = mipi_elem_exec(intel_dsi, data);
 502
 503                        /* Consistency check if we have size. */
 504                        if (operation_size && data != next) {
 505                                DRM_ERROR("Inconsistent operation size\n");
 506                                return;
 507                        }
 508                } else if (operation_size) {
 509                        /* We have size, skip. */
 510                        DRM_DEBUG_KMS("Unsupported MIPI operation byte %u\n",
 511                                      operation_byte);
 512                        data += operation_size;
 513                } else {
 514                        /* No size, can't skip without parsing. */
 515                        DRM_ERROR("Unsupported MIPI operation byte %u\n",
 516                                  operation_byte);
 517                        return;
 518                }
 519        }
 520}
 521
 522void intel_dsi_msleep(struct intel_dsi *intel_dsi, int msec)
 523{
 524        struct drm_i915_private *dev_priv = to_i915(intel_dsi->base.base.dev);
 525
 526        /* For v3 VBTs in vid-mode the delays are part of the VBT sequences */
 527        if (is_vid_mode(intel_dsi) && dev_priv->vbt.dsi.seq_version >= 3)
 528                return;
 529
 530        msleep(msec);
 531}
 532
 533void intel_dsi_log_params(struct intel_dsi *intel_dsi)
 534{
 535        DRM_DEBUG_KMS("Pclk %d\n", intel_dsi->pclk);
 536        DRM_DEBUG_KMS("Pixel overlap %d\n", intel_dsi->pixel_overlap);
 537        DRM_DEBUG_KMS("Lane count %d\n", intel_dsi->lane_count);
 538        DRM_DEBUG_KMS("DPHY param reg 0x%x\n", intel_dsi->dphy_reg);
 539        DRM_DEBUG_KMS("Video mode format %s\n",
 540                      intel_dsi->video_mode_format == VIDEO_MODE_NON_BURST_WITH_SYNC_PULSE ?
 541                      "non-burst with sync pulse" :
 542                      intel_dsi->video_mode_format == VIDEO_MODE_NON_BURST_WITH_SYNC_EVENTS ?
 543                      "non-burst with sync events" :
 544                      intel_dsi->video_mode_format == VIDEO_MODE_BURST ?
 545                      "burst" : "<unknown>");
 546        DRM_DEBUG_KMS("Burst mode ratio %d\n", intel_dsi->burst_mode_ratio);
 547        DRM_DEBUG_KMS("Reset timer %d\n", intel_dsi->rst_timer_val);
 548        DRM_DEBUG_KMS("Eot %s\n", enableddisabled(intel_dsi->eotp_pkt));
 549        DRM_DEBUG_KMS("Clockstop %s\n", enableddisabled(!intel_dsi->clock_stop));
 550        DRM_DEBUG_KMS("Mode %s\n", intel_dsi->operation_mode ? "command" : "video");
 551        if (intel_dsi->dual_link == DSI_DUAL_LINK_FRONT_BACK)
 552                DRM_DEBUG_KMS("Dual link: DSI_DUAL_LINK_FRONT_BACK\n");
 553        else if (intel_dsi->dual_link == DSI_DUAL_LINK_PIXEL_ALT)
 554                DRM_DEBUG_KMS("Dual link: DSI_DUAL_LINK_PIXEL_ALT\n");
 555        else
 556                DRM_DEBUG_KMS("Dual link: NONE\n");
 557        DRM_DEBUG_KMS("Pixel Format %d\n", intel_dsi->pixel_format);
 558        DRM_DEBUG_KMS("TLPX %d\n", intel_dsi->escape_clk_div);
 559        DRM_DEBUG_KMS("LP RX Timeout 0x%x\n", intel_dsi->lp_rx_timeout);
 560        DRM_DEBUG_KMS("Turnaround Timeout 0x%x\n", intel_dsi->turn_arnd_val);
 561        DRM_DEBUG_KMS("Init Count 0x%x\n", intel_dsi->init_count);
 562        DRM_DEBUG_KMS("HS to LP Count 0x%x\n", intel_dsi->hs_to_lp_count);
 563        DRM_DEBUG_KMS("LP Byte Clock %d\n", intel_dsi->lp_byte_clk);
 564        DRM_DEBUG_KMS("DBI BW Timer 0x%x\n", intel_dsi->bw_timer);
 565        DRM_DEBUG_KMS("LP to HS Clock Count 0x%x\n", intel_dsi->clk_lp_to_hs_count);
 566        DRM_DEBUG_KMS("HS to LP Clock Count 0x%x\n", intel_dsi->clk_hs_to_lp_count);
 567        DRM_DEBUG_KMS("BTA %s\n",
 568                        enableddisabled(!(intel_dsi->video_frmt_cfg_bits & DISABLE_VIDEO_BTA)));
 569}
 570
 571bool intel_dsi_vbt_init(struct intel_dsi *intel_dsi, u16 panel_id)
 572{
 573        struct drm_device *dev = intel_dsi->base.base.dev;
 574        struct drm_i915_private *dev_priv = to_i915(dev);
 575        struct mipi_config *mipi_config = dev_priv->vbt.dsi.config;
 576        struct mipi_pps_data *pps = dev_priv->vbt.dsi.pps;
 577        struct drm_display_mode *mode = dev_priv->vbt.lfp_lvds_vbt_mode;
 578        u16 burst_mode_ratio;
 579        enum port port;
 580
 581        DRM_DEBUG_KMS("\n");
 582
 583        intel_dsi->eotp_pkt = mipi_config->eot_pkt_disabled ? 0 : 1;
 584        intel_dsi->clock_stop = mipi_config->enable_clk_stop ? 1 : 0;
 585        intel_dsi->lane_count = mipi_config->lane_cnt + 1;
 586        intel_dsi->pixel_format =
 587                        pixel_format_from_register_bits(
 588                                mipi_config->videomode_color_format << 7);
 589
 590        intel_dsi->dual_link = mipi_config->dual_link;
 591        intel_dsi->pixel_overlap = mipi_config->pixel_overlap;
 592        intel_dsi->operation_mode = mipi_config->is_cmd_mode;
 593        intel_dsi->video_mode_format = mipi_config->video_transfer_mode;
 594        intel_dsi->escape_clk_div = mipi_config->byte_clk_sel;
 595        intel_dsi->lp_rx_timeout = mipi_config->lp_rx_timeout;
 596        intel_dsi->hs_tx_timeout = mipi_config->hs_tx_timeout;
 597        intel_dsi->turn_arnd_val = mipi_config->turn_around_timeout;
 598        intel_dsi->rst_timer_val = mipi_config->device_reset_timer;
 599        intel_dsi->init_count = mipi_config->master_init_timer;
 600        intel_dsi->bw_timer = mipi_config->dbi_bw_timer;
 601        intel_dsi->video_frmt_cfg_bits =
 602                mipi_config->bta_enabled ? DISABLE_VIDEO_BTA : 0;
 603        intel_dsi->bgr_enabled = mipi_config->rgb_flip;
 604
 605        /* Starting point, adjusted depending on dual link and burst mode */
 606        intel_dsi->pclk = mode->clock;
 607
 608        /* In dual link mode each port needs half of pixel clock */
 609        if (intel_dsi->dual_link) {
 610                intel_dsi->pclk /= 2;
 611
 612                /* we can enable pixel_overlap if needed by panel. In this
 613                 * case we need to increase the pixelclock for extra pixels
 614                 */
 615                if (intel_dsi->dual_link == DSI_DUAL_LINK_FRONT_BACK) {
 616                        intel_dsi->pclk += DIV_ROUND_UP(mode->vtotal * intel_dsi->pixel_overlap * 60, 1000);
 617                }
 618        }
 619
 620        /* Burst Mode Ratio
 621         * Target ddr frequency from VBT / non burst ddr freq
 622         * multiply by 100 to preserve remainder
 623         */
 624        if (intel_dsi->video_mode_format == VIDEO_MODE_BURST) {
 625                if (mipi_config->target_burst_mode_freq) {
 626                        u32 bitrate = intel_dsi_bitrate(intel_dsi);
 627
 628                        /*
 629                         * Sometimes the VBT contains a slightly lower clock,
 630                         * then the bitrate we have calculated, in this case
 631                         * just replace it with the calculated bitrate.
 632                         */
 633                        if (mipi_config->target_burst_mode_freq < bitrate &&
 634                            intel_fuzzy_clock_check(
 635                                        mipi_config->target_burst_mode_freq,
 636                                        bitrate))
 637                                mipi_config->target_burst_mode_freq = bitrate;
 638
 639                        if (mipi_config->target_burst_mode_freq < bitrate) {
 640                                DRM_ERROR("Burst mode freq is less than computed\n");
 641                                return false;
 642                        }
 643
 644                        burst_mode_ratio = DIV_ROUND_UP(
 645                                mipi_config->target_burst_mode_freq * 100,
 646                                bitrate);
 647
 648                        intel_dsi->pclk = DIV_ROUND_UP(intel_dsi->pclk * burst_mode_ratio, 100);
 649                } else {
 650                        DRM_ERROR("Burst mode target is not set\n");
 651                        return false;
 652                }
 653        } else
 654                burst_mode_ratio = 100;
 655
 656        intel_dsi->burst_mode_ratio = burst_mode_ratio;
 657
 658        /* delays in VBT are in unit of 100us, so need to convert
 659         * here in ms
 660         * Delay (100us) * 100 /1000 = Delay / 10 (ms) */
 661        intel_dsi->backlight_off_delay = pps->bl_disable_delay / 10;
 662        intel_dsi->backlight_on_delay = pps->bl_enable_delay / 10;
 663        intel_dsi->panel_on_delay = pps->panel_on_delay / 10;
 664        intel_dsi->panel_off_delay = pps->panel_off_delay / 10;
 665        intel_dsi->panel_pwr_cycle_delay = pps->panel_power_cycle_delay / 10;
 666
 667        /* a regular driver would get the device in probe */
 668        for_each_dsi_port(port, intel_dsi->ports) {
 669                mipi_dsi_attach(intel_dsi->dsi_hosts[port]->device);
 670        }
 671
 672        return true;
 673}
 674